SSI Artificial Lift - believes that service isn’t just …...The SSi Artificial Lift Intelligent...
2
Head Office: Phone: +1 (844) LIFT-SSI (543-8774) | Fax: +1 (403) 253-4448 | 3220 118 Avenue SE, Calgary, AB T2Z 3X1 | [email protected] Regional Offices Canada: Edmonton, Grande Prairie, Fort McMurray, Red Deer, Saskatoon, Swift Current © 201 5 SSi Artificial Lift Rod Pumping System is a Registered Trademark of Tundra Process Solutions Ltd. » Manufacturer of world-class and industry-leading products » Operating temperatures from -45 to 80°C (-49 to 149°F) » Installation, start-up and commissioning services Service Solutions believes that service isn’t just another thing. IT’S EVERYTHING. The SSi service department provides: » Well Optimization Services » Same-day response » Certified factory trained technicians available on-call 24/7 » Emergency shipments available 24/7 » Trouble-shooting and diagnostic equipment and methods » Comprehensive safety program (C.O.R. Certified) WHY DO SO MANY CHOOSE ? Regional Offices USA: Colorado, Oklahoma, Houston Regional Offices South America: Bogota, Colombia » Micro turbine options for gas casing » GenSet compatible » Chemical injection options Rod Pumping System The Evolution of Rod Pumping » SCADA ready » Certified factory trained technicians » Long-term and short-term maintenance agreements Printed in Canada 08201531
Transcript of SSI Artificial Lift - believes that service isn’t just …...The SSi Artificial Lift Intelligent...
Head Office: Phone: +1 (844) LIFT-SSI (543-8774) | Fax: +1 (403) 253-4448 | 3220 118 Avenue SE, Calgary, AB T2Z 3X1 | [email protected]
Regional Offices Canada: Edmonton, Grande Prairie, Fort McMurray, Red Deer, Saskatoon, Swift Current
© 2015 SSi Artificial Lift Rod Pumping System is a Registered Trademark of Tundra Process Solutions Ltd.
» Manufacturer of world-class and industry-leading products
» Operating temperatures from -45 to 80°C (-49 to 149°F)
» Installation, start-up and commissioning services
Service Solutions
believes that service isn’t just another thing. IT’S EVERYTHING. The SSi service department provides:
»
Well Optimization Services»
Same-day response»
Certified factory trained technicians available on-call 24/7
» Emergency shipments available 24/7
» Trouble-shooting and diagnostic equipment and methods
» Comprehensive safety program (C.O.R. Certified)
WHY DO SO MANY CHOOSE ?
Regional Offices USA: Colorado, Oklahoma, Houston
Regional Offices South America: Bogota, Colombia
» Micro turbine options for gas casing» GenSet compatible» Chemical injection options
Rod Pumping System
The Evolution of Rod Pumping
» SCADA ready» Certified factory trained technicians
» Long-term and short-term maintenance agreements
Printed in Canada 08201531
Artificial Lift
The SSi Artificial Lift Intelligent Rod Pumping System uses patented logic, variable frequency drive (VFD) control, hydraulic system and intelligentmonitoring to improve well production. The system offers a much lower total cost of installation when compared to other forms of artificial lift.
Well Design
Transportation & Installation
Operation & Production
- Ease of workover (15 minutes or less)
- PLC controlled monitoring of all functions & alarms
- Integrated dual-stage pump off controller
- Well optimization in minutes with PLC produced surface dynacard
- Lower per-barrel cost
- Run times greater than 99%
- High turndown ratio for high decline wells
- 30-70% energy efficiency
- Autostroke PLC logic - Patent Pending
HSE
Stroke Length
152.2
MODEL 250 Model Strokes Per Minute Horsepower Lifting Capacity
250-15-240 240"25,000 lbs
252.8250-25-240 240"25,000 lbs
4.4 40250-40-240 240"25,000 lbs
250-60-240 5.3
250-75-240
60
6.0 75
25,000 lbs 240"
25,000 lbs 240"
Stroke Length
1807.0
MODEL 350 Model Strokes Per Minute Horsepower Lifting Capacity
350-150-372 372"35,000 lbs
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
2.1 100800-100-360 80,000 lbs 360"
2.8 125800-125-360 80,000 lbs 360"
3.0 150800-150-360 80,000 lbs 360"
MODEL 800
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
1.7 40400-40-288 336"40,000 lbs
2.0 60400-60-288 336"40,000 lbs
3.4 75400-75-288 336"40,000 lbs
400-100-288 3.7
400-125-288 5.1
100
125
40,000 lbs 336"
40,000 lbs 336"
MODEL 400 LS
MODEL 600 Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
601.7600-60-336 336"60,000 lbs
2.0 75600-75-336 336"60,000 lbs
2.3 100600-100-336 336"60,000 lbs
3.2 125600-125-336 336"60,000 lbs
- Fewer well interventions due to reduced tubing and sucker rod wear and BHP failure
- 90% downhole pump efficiency or greater- Stroke lengths up to 372 inches
- Lift capacity up to 80,000 lbs- Small footprint and well spacing
- 15 foot for Model 250, 350 & 400 - 20 foot for Model
600 & 800
- Systems can be installed and running within 4 hours- Requires only 1 truck with picker for installation- Modular 2-component design (pump & power unit)- Certified factory trained service and installation and on-site comprehensive operator training available
Planned PreventativeMaintenance
- Rapid response to customer support requirements by SSi’s team of
experienced technicians- PM conducted every 180 days
Unit Selection for Well Optimization
- Design collaboration- Final selection of model
Model 250 Model 350
Model 400 Model 600
Model 800- Final selection of HP
15, 25, 40, 60, 75, 100, 125, or 150 HP
- Improved safety and environmental impact - Inherently safe design with no large
rotating counterweight and quieter operation
