Spruce Hasel - tilo
4
Technical documents /DESIGN ROBUSTO PRO+ General data Order. Nr. R3010 Short description ISO 10582-compliant, heterogeneous Design-Vinyl floor covering with different wear layer thicknesses for direct bonding to floor subsurfaces. Type of installation Full spread gluing Area of application Suitable for living spaces with an average indoor climate with 40 to 60 % relative humidity and between 16 and 24° C, and damp locations with temporary damp conditions up to 80 % relative humidity and occasional water splashes. Not suitable for wet locations, such as shower rooms or similar (permanently damp, permanently wet, standing wetness). It is particularly important to take into consideration the suitability of the subsurface for damp locations. Anhydrite is conditionally suitable, wood materials are unsuitable. Spruce Hasel
Transcript of Spruce Hasel - tilo
Technical documents
/DES
IGN
ROBUSTO PRO+
General dataOrder. Nr. R3010
Short descriptionISO 10582-compliant, heterogeneous Design-Vinyl floorcovering with different wear layer thicknesses for directbonding to floor subsurfaces.
Type of installation Full spread gluing
Area of application
Suitable for living spaces with an average indoor climate with40 to 60 % relative humidity and between 16 and 24° C, anddamp locations with temporary damp conditions up to 80 %relative humidity and occasional water splashes. Not suitablefor wet locations, such as shower rooms or similar(permanently damp, permanently wet, standing wetness). It isparticularly important to take into consideration the suitabilityof the subsurface for damp locations. Anhydrite is conditionallysuitable, wood materials are unsuitable.
Spruce Hasel
/DES
IGN
Area of applicationsubsurface
Conforming to standards, ready for installation, dry, load-bearing subsurface with a flatness tolerance in conformity withDIN 18202 ÖNORM Table 3 Row 4 is required (for furtherInformation, see "TI_110 Information_Pruefpflichten_en.pdf") The material and work site must be sufficiently acclimatised,the inspection obligations as per DIN 18365 or thecorresponding standards and requirements of the respectivecountry must be met; readiness for installation must beestablished; it is particularly important to take intoconsideration the suitability of the subsurface for damplocations (anhydrite is suitable in certain circumstances, woodmaterials are unsuitable). On-site expansion joints must beused; an edge distance of approx. 5 mm is recommendedduring the installation; the rules of the trade and theinstallation guidelines included with the product must beadhered to.
Care instructions
Only factory-recommended care and cleansing agents shouldbe used; routine cleaning depends on the level of use and dirt,clean while damp and care in accordance with the careinstructions enclosed with the product
Dimensions ISO 24342 1205,00 x 210,00
Commercial thickness ISO 24346 2,00
Top layer Vinyl suitable for use in damp locations
Grading/décor wood design
Wear layer 0,55 mm
Bevelled edge bevelled (4V)
Surface scraped
construction 3-layer
Finish Twist PLUS varnished
Technical dataWear group classification NKL 33 ISO 10582
Suitablity for castor wheels
Suitable with W typecastors - no debonding,minor changes to thesurface possible
EN 425
Flame class Bfl-s1 EN-ISO 9239-1
Formaldehyde E1 EN ISO 717-1
PCP free CEN/TR 14823
Impactsound reduction 17 dB EN ISO 717-2
/DES
IGN
Thermal resistance 0,020 m²K/W EN 12664
Slip resistance DS EN 13893
Static charge ≤ 2,5 kV EN 1815
Dimensional stability ≤ 0,15 % ISO 23999
Resistance to chemicals 0 = very good ISO 26987
Light fastness >6 ISO 105-B02
Slip resistance R9 DIN 51130
Window areas
Please note that in rooms with large windows in particular,changes in colour caused by UV light cannot be ruled outcompletely and are therefore product-specific. Shading maybe necessary.
Delivery contentBoards per package 16,00 st
Packages per pallet 40 packages
Area per package 4,0490 m2
Area per pallet 161,96 m²
Weight per package 14,720 kg
Weight per pallet 588,8 kg
Further informationEnvironmental sustainability CE Declaration of Performance; REACH Declaration;
Declaration of No-Objection
Floating installation in damplocations
When using this product, we recommend installingappropriate impact sound insulation. We recommend tiloNeutra underlay mat. Underlay that is too soft or that is notsuitable for damp/wet locations must not be used. Pleaseobserve the mat installation guidelines.
Full spread gluing
In order to smooth out any unevenness and maintain an evenlyabsorbent subsurface, smooth out pronounced roughness orremove sinter layers or sandy layers, the subsurface should besanded and vacuumed or, if necessary, built up to a suitablethickness with the appropriate precoats and fillers. Pleaseobserve the instructions of the products required and of therelevant building material suppliers.
/DES
IGN
Adhesive recommendation Apply tilo "EC1 PLUS adhesive for vinyl floors" using thenotched trowel recommended in the application instructions.
Tools required
Strong carpet cutter, tape measure, try square, handheldpressure roller, pressure roller for floor coverings from approx.50 kg.
tilo EC1 PLUS adhesive for SPA rigid boards and PRO+adhesive sheets vinyl floors
Warning notice Store in a place that is protected from moisture, heat anddirect sunlight
This information is provided with the intention of offering you advice based on the best of our knowledge, on the basis of ourtrials, experiences, tests carried out, applicable standards and the rules of the trade. Should you require any additionalinformation, our technical and commercial advisors will be happy to assist you. Always consult our advisors for advice beforestarting any large-scale projects. We assume no liability for any errors and reserve the right to carry out technical modifications.
Please visit www.tilo.com for further information and updates.
Version : 1.00.052020
tilo GmbH | Magetsham 19 | A-4923 Lohnsburg+43 7754 400-0 | [email protected] | www.tilo.com
