SPREAD MOORING SYSTEMS - petex.utexas.edu
Transcript of SPREAD MOORING SYSTEMS - petex.utexas.edu
SPREAD MOORINGSYSTEMS
ROTARY DRILLING
Second EditionUNIT V • LESSON 2
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
rotary drilling series
Unit i: the rig and its Maintenance
Lesson1: TheRotaryRigandItsComponentsLesson2: TheBitLesson3: DrillStringandDrillCollarsLesson4: Rotary,Kelly,Swivel,Tongs,andTopDriveLesson5: TheBlocksandDrillingLineLesson6: TheDrawworksandtheCompoundLesson7: DrillingFluids,MudPumps,andConditioningEquipmentLesson8: DieselEnginesandElectricPowerLesson9: TheAuxiliariesLesson10: SafetyontheRig
Unit ii: normal drilling operations
Lesson1: MakingHoleLesson2: DrillingFluidsLesson3: DrillingaStraightHoleLesson4: CasingandCementingLesson5: TestingandCompleting
Unit iii: nonroutine operations
Lesson1: ControlledDirectionalDrillingLesson2: Open-HoleFishingLesson3: BlowoutPrevention
Unit iV: Man Management and rig Management
Unit V: offshore technology
Lesson1: Wind,Waves,andWeatherLesson2: SpreadMooringSystemsLesson3: Buoyancy,Stability,andTrimLesson4: JackingSystemsandRigMovingProceduresLesson5: DivingandEquipmentLesson6: VesselInspectionandMaintenanceLesson7: HelicopterSafetyLesson8: OrientationforOffshoreCraneOperationsLesson9: LifeOffshoreLesson10: MarineRiserSystemsandSubseaBlowoutPreventers
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
iii
contentsFigures v
Foreword ix
Preface xi
Acknowledgments xiii
UnitsofMeasurement xiv
HoldingFloatingVessels 1 Early Mooring Systems 1Offshore Environments 9Mooring Patterns 11Principles of Mooring Systems 12
Anchor Holding Power 12Catenary Curves 14
To summarize 19
ComponentsofMooringSystems 21Mooring Line Arrangements 21
Types of Anchors 23Stud-Link Chain 30Wire Rope 35
Connecting Elements 41Chain Fittings 42Wire Rope Fittings 44
Storing the Rope 46Types of Winches 47
Pulling In and Running Out Chain 50Windlass Components 51
Measuring Mooring Line Tension 53Chain Tension Measurements 53Wire Rope Tension Measurements 56
Pulling and Lowering Anchors 57Anchor-Handling Boats 59To summarize 62
PlacingandRecoveringMoorings 63Planning a Successful Mooring Operation 63Moving Onto Location 65
Running Out an Anchor 66Setting an Anchor 68Preloading and Pretensioning Anchor Lines 69Piggybacking Anchors 69
Adjusting Mooring Systems in Rough Weather 70Pulling an Anchor 70
▼▼▼
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
iv
Moving Off Location 73To summarize 78
References 79
Appendix 81
Glossary 87
ReviewQuestions 91
Index 95
Answers 101
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
xi
Preface
The use of dynamically posi-tioned vessels has certainly
increased dramatically in recent years, but spread moorings still play a vital role in the offshore drill-ing industry. Innovations in mooring line materials, anchor holding power, and deployment and retrieval methods have improved the efficiency of mooring systems since the original text of this book was written over thirty years ago.
While the subject of spread mooring systems and equipment is necessarily quite complex, this updated text attempts to explain the main principles and applications to participants of the drilling industry in an understandable way. It is intended to give readers a basic overview of the topic from a historical and an operational viewpoint, while touching on the technical details in sufficent depth to understand their importance and relevance.
christopher Morlan Manaer of Structural engineering and naval architectureMoU engineering at SBM atlantia in Houston, texas
Morlan, who contributed his significant expertise to enhancing this new edition of Spread Mooring Systems, has several years of experience review-ing and analyzing floating offshore structures including semisubmersibles, jackups, drillships, barges, and various small vessels. His background also includes experience with drilling rig layout, design, weight control, and vessel interface; and extensive experience in stability analysis, motions response analysis, mooring analysis, riser analysis, and design and weight management. He has conducted inclining experiments and deadweight surveys on jackups, semisubmersibles, and drillships.
▼▼▼
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
xiv
Throughout the world, two systems of measurement domi-nate: the English system and the met ric system. To day, the
United States is one of only a few countries that employs the En-glish sys tem.
The English system uses the pound as the unit of weight, the foot as the unit of length, and the gallon as the unit of capacity. In the En glish system, for example, 1 foot equals 12 inches, 1 yard equals 36 inches, and 1 mile equals 5,280 feet or 1,760 yards.
The metric system uses the gram as the unit of weight, the metre as the unit of length, and the litre as the unit of capacity. In the metric system, 1 me tre equals 10 decimetres, 100 centime-tres, or 1,000 milli metres. A kilometre equals 1,000 me tres. The metric system, un like the English system, uses a base of 10; thus, it is easy to convert from one unit to another. To convert from one unit to an other in the English system, you must memorize or look up the val ues.
In the late 1970s, the Eleventh General Conference on Weights and Measures de scribed and adopted the Système International (SI) d’U nités. Conference participants based the SI system on the metric system and de signed it as an interna tional stan dard of measurement.
The Rotary Drilling Series gives both English and SI units. And because the SI sys tem employs the British spelling of many of the terms, the book follows those spelling rules as well. The unit of length, for ex ample, is metre, not me ter. (Note, however, that the unit of weight is gram, not gramme.)
To aid U.S. readers in making and understanding conversion to the SI system, we in clude the following table.
Units of Measurement▼▼▼
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
xv
Quantity Multiply to obtain or Property english Units english Units By these Si Units Length, inches (in.) 25.4 millimetres (mm) depth, 2.54 centimetres (cm) or height feet (ft) 0.3048 metres (m) yards (yd) 0.9144 metres (m) miles (mi) 1609.344 metres (m) 1.61 kilometres (km) Hole and pipe di ame ters, bit size inches (in.) 25.4 millimetres (mm) Drilling rate feet per hour (ft/h) 0.3048 metres per hour (m/h) Weight on bit pounds (lb) 0.445 decanewtons (dN) Nozzle size 32nds of an inch 0.8 millimetres (mm) barrels (bbl) 0.159 cubic metres (m3) 159 litres (L) gallons per stroke (gal/stroke) 0.00379 cubic metres per stroke (m3/stroke) ounces (oz) 29.57 millilitres (mL) Volume cubic inches (in.3) 16.387 cubic centimetres (cm3) cubic feet (ft3) 28.3169 litres (L) 0.0283 cubic metres (m3) quarts (qt) 0.9464 litres (L) gallons (gal) 3.7854 litres (L) gallons (gal) 0.00379 cubic metres (m3) pounds per barrel (lb/bbl) 2.895 kilograms per cubic metre (kg/m3) barrels per ton (bbl/tn) 0.175 cubic metres per tonne (m3/t)
gallons per minute (gpm) 0.00379 cubic metres per minute (m3/min) Pump output gallons per hour (gph) 0.00379 cubic metres per hour (m3/h) and flow rate barrels per stroke (bbl/stroke) 0.159 cubic metres per stroke (m3/stroke) barrels per minute (bbl/min) 0.159 cubic metres per minute (m3/min)
Pressure pounds per square inch (psi) 6.895 kilopascals (kPa) 0.006895 megapascals (MPa)
Temperature degrees Fahrenheit (°F) degrees Celsius (°C)
Thermal gradient 1°F per 60 feet –– 1°C per 33 metres ounces (oz) 28.35 grams (g) Mass (weight) pounds (lb) 453.59 grams (g) 0.4536 kilograms (kg) tons (tn) 0.9072 tonnes (t) pounds per foot (lb/ft) 1.488 kilograms per metre (kg/m) Mud weight pounds per gallon (ppg) 119.82 kilograms per cubic me tre (kg/m3) pounds per cubic foot (lb/ft3) 16.0 kilograms per cubic me tre (kg/m3) Pressure gradient pounds per square inch per foot (psi/ft) 22.621 kilopascals per metre (kPa/m) Funnel viscosity seconds per quart (s/qt) 1.057 seconds per litre (s/L) Yield point pounds per 100 square feet (lb/100 ft2) 0.48 pascals (Pa) Gel strength pounds per 100 square feet (lb/100 ft2) 0.48 pascals (Pa) Filter cake thickness 32nds of an inch 0.8 millimetres (mm) Power horsepower (hp) 0.75 kilowatts (kW)
square inches (in.2) 6.45 square centimetres (cm2) square feet (ft2) 0.0929 square metres (m2) Area square yards (yd2) 0.8361 square metres (m2) square miles (mi2) 2.59 square kilometres (km2) acre (ac) 0.40 hectare (ha) Drilling line wear ton-miles (tn•mi) 14.317 megajoules (MJ) 1.459 tonne-kilometres (t•km) Torque foot-pounds (ft•lb) 1.3558 newton metres (N•m)
°F - 32 1.8
english-Units-to-Si-Units conversion Factors
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
xvi
Mooring system. Surface and underwater views of a typical spread mooring system in offshore operations
Cou
rtes
y of
In
terM
oor
Inc.
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
1
HoldingFloatingVessels
In this chapter:
• Anchorsandmooringlinesusedforoffshoreoperations
• Typicalmooringsystempatterns
• Principlesofanchorandmooringlinebehavior
• Balancingandcounterbalancinghorizontalforces
Holdingafloatingvesselnearafixedlocationonthesurfaceofthesea,calledmooring,isanage-oldchallenge.Basicprinciplesand
conceptshavechangedlittlesinceancienttimes;however,technologiesandapplicationshaveimprovedmarkedly.Asoilandgasexplorationhasmovedincreasinglyoffshore,morepermanentmooringsystemshavebeendevelopedtokeepfloatingoperationsinplace.
Theearliestmooringsystemsconsistedofnaturalfiberropesattachedtoanchorstones.Varioustypesofanchorstones,datingbackasfaras1600B.C.,havebeenrecoveredfromEgyptiantombsandtheMedi-terraneanSeafloor.Metalanchorswereintroducedbytheyear800B.C.,whenbronzeanchorswerecastontheislandofMalta.By300B.C.,ironanchorswerecommontoshipsoftheAtheniannavy.Asshowninfigure1,someoftheseearlyanchorscontainthefeaturesofrelativelymodernanchors.RapiddevelopmentofanchorsintheyearsfollowingtheIndustrialRevolutionculminatedinthestockless anchoroftheearlytwentiethcentury.
EarlyMooringSystems
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
21
ComponentsofMooringSystems
In this chapter:
• Mooringlinearrangements
• Typesofanchors
• Wirerope,chain,connectors,andfittings
• Anchor-handlingequipment
• Tensionmeasurement
Figures17and18showtwomooringlinearrangementsthatareused.One is a chainconfigurationcommonlyused in shallow
water; theother is a compositewire ropeandchainconfigurationcommonlyusedindeeperwater.Botharrangementscontainprac-tically all components found in spreadmooring systems: anchors,wirerope,chain,endfittings,buoys,andhandlingequipmentsuchaswinchesandwindlasses.Notshownareanchor-handlingboatsthatdeployandretrievetheanchors.
Maincomponentsofaspreadmooringsystem:
• Buoystomarklocations
• Anchorstodropweighttoholdavessel
• Wireropeandchaintomakeupthemooringline
• Endfittingstoaddholdingpower
• Winchestohandleandstorerope
• Windlassestopropeltheline
MooringLineArrangements
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
63
In this chapter:
• Companiesinvolvedinmooringoperations
• Movingonandofflocation
• Runningandsettingmooringpatterns
• Pullingupanchors
• Functionofanchor-handlingboats
Asuccessful mooring operation requires considerable planningandorganization.Thewellsiteshouldbemarkedandsurveyedandthebottomconditionsestablishedbeforetherigmovesontoloca-tion.Whenwaterdepthsareknown,pendantlinescanbecheckedforcorrectlengths.Itisimportanttoinventoryandinspectallmooringcomponents and handling equipment to ensure they are availableand in good condition. Anymissing or damaged items should bereplacedorrepaired.Allparticipatingpersonnelshouldreviewandunderstandallequipmentandprocedurestoensuresafeandefficientoperations(fig.61).
Constantandclosecoordinationbetweenthedrillingrigandtheanchor-handlingboatisessentialduringthemooringoperation.Clearlinesofcommunicationshouldbeestablishedbeforehandtoavoidanyconfusiononthejob.Thistaskiscomplicatedbythefactthatmultiplecompanies,organizations,and individualsmightbeinvolved.
PlacingandRecoveringMoorings
PlanningaSuccessfulMooringOperation
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
95
INDEX
Index
airtuggers,61
AmericanBureauofShipping,30
anchorbehaviordependentonbottomconditions,13
anchorchainmooringlineandrelated equipment,22
anchorchains
oilrigtowingwith,76
pulledoffanchor,75
swivelfairleadfor,55
anchor-handlingboats,21,59–62
heaveof,71
settinganchorfrom,68
anchor-handlingdeckequipmentarrangement,61
anchor-handlingoperation,76
anchor-handlingoperator,64
anchor-handlingvesseladjacenttooffshorerig,60
anchor-handlingwinch,38,48
anchorholdingpower,12–14
anchors anchorchainpulledoff,75
basic-type,withidentifiedparts,13
ofhistoricalinterest,2
mooringpatternand,65
orderofretrieving,73
sequenceofsettingandretrieving,65
typesof,23–29
API Specification for Mooring Chain (APISpec.2F),(AmericanPetroleumInstitute),34
Baldtdetachableanchorconnectinglink,42
Baldtdetachablechainconnectinglink,42
Baldtswivelsandendshackles,43
ballingup,12
ball-jointends,10
blowoutpreventer(BOP)stack,9
blowouts,47,51
BOSSanchor,25
breaking-strength,3
Bruce®anchor,26
buoys
beingtransportedforoffshoreoperations,58
ondeck,59
catenarycurves,3,14–19
chainandwildcat,checkingfitbetween,52
chainlinetensionmeasurement,53,54
chainlocker,50,51
chainmooringlines,22
andwireropecombination,18,22
chains.See alsoanchorchains cracksin,34
crownchain,57
Di-Lokchain,30,31,32
fatiguein,34
flash-buttweldedchain,33
mooringchain,50
mooringlines,18,22
OilRigQuality(ORQ),30
specificationfor,30,34
stud-linkchain,30–34Petr
oleum
Extens
ion-The
Univ
ersity
of Tex
as at
Austin
96
SPREADMOORINGSYSTEMS
chainspecifications,30,34
chainstoppers,51
chainsystemsfailurepoints,41
chaintension,maximum,30
chaintensionmeasurements,53–54
chasers,70
chaserwire,73
lockedin,74
andworkwire,74
chock,53
combinationwireropeandanchorchainmooringline,22
combinationwireropeandchainmooringline,18
compositelines,22
compositemooringlines,18
connectingelements,41–42
fatiguefailuresof,41
controllablepitchpropellers,59
conversionfactors,EnglishunitstoSIunits,xv
cracksinchains,34
crownchain,57
Danforth®anchor,23
deckequipmentarrangementforanchorhandling,61
DeltaAnchor™,26
Di-Lokchain,30
dimensionsandtestrequirements,32
Di-Lokstud-linkchainmanufacturingprocess,31
drillingoperator,64
drillingtenders,4,6
drillshiparrangementofmooringlinesanddrillingassembly,7
drillships,6,7
dual-drumwinches,46
dynamicpositioningsystemcontrols,8
dynamicpositioningsystems,8
eight-linespreadmooringpattern,5
eight-linespreadmooringsystem,5
emergencyreleasesystems,47
emergencysituations,51
environmentalforceappliedtoasemisubmersible,17
ExtraExtraImprovedPlowSteel(EEIPS),41
ExtraImprovedPlowSteel(EIPS),41
extremeweather,71
failures,41
chainsystems,41
wireropesystems,41
fairlead,15
fairleadblockandstopperline,55
fatiguedamageofmooringlines,23
fatiguefailuresofconnectingelements,41
fatigueinchains,34
flash-buttweldedchain,33
flash-buttwelding,30
flexuralstrength,15
floatingdrillingvessels,23
floatingvessels,1–19
mooringpatterns,11
mooringsystems,early,1–8
offshoreenvironments,9–11
principlesofmooringsystems,12–19
flukeangle,23,26
flukeangleblocks,28
flukeanglesetting,14
forerunner,26
globalpositioningsystem(GPS),65
handlingloads,62
heavecompensators,9,10
heavingin,68
HighHoldingPower(HHP)anchor,26Petr
oleum
Extens
ion-The
Univ
ersity
of Tex
as at
Austin
97
INDEX
horizontalmooringlineforce,16
ImprovedPlowSteel(IPS),41
independentwireropecore(IWRC),40
Kenterconnectinglink,42
Kortnozzles,59
LandingShipTanks(LSTs),5
langlayrope,40
lay,40
leeward(downwind)lines,16
leftlay,40
linkofastud-linkanchorchain,30
loadcell,53,54,56
loadsandenvironmentalforcesonasemisubmersibledrillingrig,6
maximumallowableload,16
maximumhorizontalresistingforce,18
measuringmooringlinetension,53–56
chaintensionmeasurements,53–55
wireropetensionmeasurements,56
Moorfastanchor,24
mooring,1
mooringbuoys,58
mooringchain,50
mooringequipmentonthebowsection,47
mooringlinearrangements,21–45,62
connectingelements,41–42
stud-linkchain,30–34
typesofanchors,23–29
wirerope,35–41
wireropefittings,44–45
mooringlines,1,3,5-7,9,11-12,14-15,18, 21-22,30-41
fatiguedamageof,23
sizeclassification,38
mooringlinetension,15
parametersrequiredtocalculate,15
mooringpatterns,5,11
andsequenceofsettingandretrieving anchors,65
mooringsystemprinciples,12-19
anchorholdingpower,12–14
catenarycurves,14–19
mooringsystems
anchor-handlingboats,59–62
componentsof,21–62
early,1–8
measuringmooringlinetension,53–56
mooringlinearrangements,21–45
principlesof,12–19
pullingandloweringanchors,57–58
roughweatheradjustment,70
storingtherope,46–49
windlasses,50–52
movingofflocation,73–74
movingontolocation,65–70
adjustingmooringsystemsinrough weather,70
piggybackinganchors,69–70
preloadingandpretensioninganchor lines,69
pullingananchor,70–72
runningoutananchor,66–67
settingananchor,68
naturalfiberrope,3
OffdrillIIanchor,24,25
offshoreenvironments,9–11
OilRigchain,30
OilRigQuality(ORQ),30
oilrigtowing,77
withanchorchains,76Petr
oleum
Extens
ion-The
Univ
ersity
of Tex
as at
Austin
98
SPREADMOORINGSYSTEMS
operator,64
payout,65
payoutrate,67
pelicanhooks,70
pelicanhook-typechainstopper,42,43
pendantlines,57
attachmentlocationsfor,65
lengthof,70
springbuoyholding,57
wireropefor,38
piggybacking,69
piggybackinganchors,69–70
pile-typeanchors,28,29
placingandrecoveringmoorings,63–74
movingofflocation,73–77
movingontolocation,65–70
planningasuccessfulmooringoperation,63–64
polyesterrope,19
preloading,69
preloadingandpretensioninganchorlines,69
proofload,30
propwash,58
pullingananchor,70–72
pullingandloweringanchors,57–58
pullinginandrunningoutchain,50
pullpershafthorsepower,59
quadruple-drumwinches,46
Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures(RP-2SK)(AmericanPetroleumInstitute),34
regularlay,40
restoringforcesforasemisubmersibleduetohorizontaldisplacementfromthewell,17
rightlay,40
ropelay,40
roughweatheradjustingmooringsystemsin,70
runninganchor,sequenceof,65
runningoutananchor,66–67
scope,14
Sealeconstruction,38
semisubmersibles,7
settinganchor,68
fromanchor-handlingboat,68
shafthorsepower,59
sheavediameters,41
single-drumwinches,46
single-flukedesign,25
slipjoints,9
socketfittings,44
spreadmooringpatterns,11
spreadmooringsystemscomponents,21
springbuoy,57
springbuoyholdingpendantline,57
STATOanchor,24
StevmantaVLA™(VerticallyLoaded Anchor),28
Stevpris™anchor,26,72,75
StevprisMk6™anchor,27,28
Stevshark™anchor,26,27
stocklessanchor,1
stopperlineandfairleadblock,55
stoppers,42
storingtherope,46–49
stormconditions,70
stormtensions,70
stud,30
stud-linkchain,30–34
submersiblebarges,6
suctionpile,29
surveyboat,65
surveycompany,64
swagedsockets,44
swivelfairlead,54-55
foranchorchain,55
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
99
INDEX
swivels,42
tailroller,61
tension
chaintension,maximum,30
chaintensionmeasurements,53–55
measuringmooringlinetension,53–56
mooringlinetension,15
parametersrequiredtocalculate,15
preloadingandpretensioninganchor lines,69
stormtensions,70
three-sheavewirelinetension-measuring device,56
wirelinetension-measuringdevice,three-sheave,56
wireropetensionmeasurements,56
thimbles,45
thrusters,8
traction-winchtype,49
trips,12
turretmooring,8
turret-typemooringarrangement,9
Ulsterpawl-typestopper,42,43
U.S.NavyLightweight(LWT)anchor,23
verticalcenterofgravity(VCG),35
Warringtonconstruction,38
waterdepths,22
watertightcompartments,60
wellheadflexibleconnection,connector,andblowoutpreventerarrangement,10
whelps,51
wildcats,51
winchdrum,49
winches,21
anchorhandling,38,48
typesof,46–49
windlasscomponents,51–52
windlasses,21
pullinginandrunningoutchain,50
windlasscomponents,51–52
windlasswildcatandchain-handling equipment,51
windward(upwind)lines,16
wirelinetension-measuringdevice,three-sheave,56
wirerope,3,35–41
6x19classification,galvanized, independentwireropecore,38
6x37classification,bright(uncoated)or drawngalvanizedwire,independent wireropecore,39
advantagesanddisadvantagesof,35
andchainmooringlinecombination,18,22
classificationsof,37
constructionof,36
constructiontypes,38
forpendantlines,38
precautionswith,40
wireropecore,38
wireropefabricationterminology,36
wireropefibercore,40
wireropefittings,43–45
wireropelubricants,40
wireropesystemfailurepoints,41
wireropetensionmeasurements,56
wireropethimble,45
wireropewindingprocedures,49
wirestrandcore(WSC),40
workwireandchaserwire,74
zinc-pouredsockets,44Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
To obtain additional training materials, contact:
PETEXThe University of Texas at Austin
Petroleum extension service10100 Burnet Road, Bldg. 2
Austin, TX 78758
Telephone: 512-471-5940or 800-687-4132
FAX: 512-471-9410or 800-687-7839
E-mail: [email protected] visit our Web site: www.utexas.edu/ce/petex
To obtain information about training courses, contact:
PETEXlearning and assessment center
The University of Texas4702 N. Sam Houston Parkway West, Suite 800
Houston, TX 77086
Telephone: 281-397-2440or 800-687-7052
FAX: 281-397-2441E-mail: [email protected]
or visit our Web site: www.utexas.edu/ce/petex
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin
2.502200-88698-253-7
978-0-88698-253-9
Petrole
um Exte
nsion
-The U
nivers
ity of
Texas
at Aus
tin