SPIRAL DUCT MANUFACTURERS - FatCowtntmfg.fatcow.com/basic/poster.pdf · 90 Degree Conical Tee 90...
Transcript of SPIRAL DUCT MANUFACTURERS - FatCowtntmfg.fatcow.com/basic/poster.pdf · 90 Degree Conical Tee 90...
90 Degree Stamped Elbow 1.5 c/l rad 90 Degree Stamped Elbow 1 c/l rad 45 Degree Stamped Elbow 1.5 c/l rad 90 Degree Gored Elbow 1.5 c/l rad 45 Degree Gored Elbow 1.5 c/l rad Concentric Reducer
90 Degree Straight Tee 90 Degree Reducing Tee 90 Degree Cross Tee 90 Degree Reducing Cross Tee Endcap Eccentric Reducer
45 Degree Lateral 45 Degree Reducing Lateral Tapered Body Reducing Lateral 45 Degree Lateral Cross Square to Round Fitting Male Coupling - Pipe to Pipe
90 Degree Conical Tee 90 Degree Reducing Conical Tee 90 Degree Conical Cross Tee 90 Degree Reducing Conical Cross In-Line Volume Damper Female Coupling - Ftting to Fitting
90 Degree Boot Tee 90 Degree Reducing Boot Tee 90 Degree Wye 45 Degree Wye Reducing 45 Degree Wye Full and Half Cut-Offs
Register Boot Increasing Register Boot Deflector Hood Saddle Bellmouth Fitting with Damper Bellmouth Fitting
90° Stamped Gasketed Elbow 90°Gored Gasketed Elbow 45 Degree Lateral Gasketed 90° Tee Gasketed Male Coupling Gasketed Endcap Gasketed
www.tntmfg.com
TNT Manufacturing508 South Caton Ave. Baltimore, Maryland 21229
Phone: 410-233-6250 Fax: 410-233-6251 e-mail: [email protected]
Galvanized, Galvanealled, Stainless, Aluminum, PVC Coated Galvanized, Perforated
Below is a sampling of fittings we manufacture. We have the capability of fabricating virtually any fitting.
Single Wall, Gasketed, 1" Dual Wall, 2" Dual Wall, Oval, Welded Kitchen Exhaust, Welded Stainless Fume Hood Duct, Buried PVC Coated
SPIRAL DUCT MANUFACTURERS