PLCSPEED7-TECHNOLOGY – compatible SIEMENS S7-300®

CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

SPEED7 INCREASES THE PRODUCTIVITY OF YOUR PLANTS AND MACHINERY• Performance:  Very fast processing and cycle times increase the output of machinery and

manufacturing plants• Interfaces: Onboard Ethernet, MPI, EtherCAt, PROFInEt, PROFIBUS-DP Master/Slave, 

PtP serial RS485 interface and integrated CP 343/543 Ethernet

• Programming language: Programmable with StEP®7 by Siemens, tIA portal and SPEED7 Studio

• Standard SD Card: the SD card is used for backup, storage of program and data and also for running the CPU (the SD-Card is not necessary to run the CPU)

•Memory Management: Via VSC card it is possible to increase the work memory of the CPU               up to 8MByte without changing the hardware

• Stock cost: Only a few of CPU types

4

TECHNICAL DATA SLIO 013C SLIO 014 SLIO 015 SLIO 017 SLIO IMC7

Work memory (50% program /50% data) 64-128kB 128-256kB 256-512kB 512kB - 2MB 256-512kB

Processingtime (Bit/Word/Fix-/ 20/20 20/120 10/60 10/60 10/60Floatingpoint in nanoseconds)

Number range: FB, FC, 8191DB 8191

Bit memory / Counter / Timer 8 8192 / 512 / 512 16kB / 2048 / 2048 8192 / 512 / 512

Local data loc. (per Prio class configurable) 1024Byte 4096Byte 1024Byte

I/O Adress area 1024 / 1024Byte 4096 /4096Byte 1024 / 1024Byte

Process image I/O 1024 / 1024Byte 4096 /4096Byte 1024 / 1024Byte

MPI max. Speed 12 MBd

Fieldbus: PROFIBUS-DP-Master integrated (under Developement) optional optional optional optional

Fieldbus: PROFIBUS-DP-Slave integrated optional optional optional optional optional

Fieldbus: PROFINET-Master integrated -- -- 4 4 --

Feldbus: ETHERCAT-Master integrated -- -- -- -- 4

PtP 4 4 4 4 4

PtP on PROFIBUS jack/MPI jack toggleable 4 4 4 4 4

Ethernet PG/OP-Port integrated/Connections 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4

Ethernet CP 343 integrated/Connections -- /-- -- /-- 4 / 8 4 / 24 -- /--ISOonTCP/ISO(H1)/S7/TCP/UDP Connections -- -- 8 24 (16) --

MOTION-axis integrated -- -- -- -- optional (4/8/16/20)

VIPA SPEED-BUS -- -- -- -- --

AE / AA / Pt100 2 / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

DE / DA / DEA’s 16 / 12 / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

Counter / PWM or Stepper (switchable) 4 (100kHz) / 2 (20kHz) -- / -- -- / -- -- / -- -- / --

Dimensions in mm: (W x H x D) 116,5 x 109 x 76,5 131,5 x 109 x 76,5 131,5 x 109 x 76,5 131,5 x 109 x 76,5 131,5 x 109 x 76,5

SPEED7 is available world-wide. More than 60 VIPA branch offices offer service and support

SPEED7-TECHNOLOGY – compatible SIEMENS S7-300®

CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

PLC

SPEED-Bus Interfaces Memory management

• the patented and unique VIPA SPEED bus is available in select CPUs for very fast appli -cations.

• A clear competitive advantage for you and yourapplication.

• In addition to the MPI and PtP interfaces, an Ethernet-PG/OP interface is, of course, always available.

• this interface will remain our standard.

• Expand your work memory by inserting a VIPA MCC without changing the CPU.

• this will remain our standard.

• Because of the enormously powerful SPEED7 chipyou will  find hardly any limitations in automationtechno logy.

• Powerful, flexible and very communicative.

• All 300S are programmable via SPEED7 Studio from VIPA or via tools of other manufacturers as wellas StEP®7 and tIA Portal by SIEMEnS.

• With VIPA, you decide which engineering toolyou want to apply!

• the mixture of VIPA modules with modules ofother manufacturers is of course possible.

• this also minimizes your warehousing costs. Just think about it!

Performance User friendly Compatible

5

TECHNICAL DATA 312SC 313SC 313SC/DPM 314SC/DPM 314ST/DPM 315SB/DPM 315SN/NET 315PN 317SE/DPM 317SN/NET 317PN

Work memory (50% program /50% data) 128kB -1MB 256kB -1MB 512kB -2MB 512kB -2MB 1MB -4MB 4MB -8MB

Processingtime (Bit/Word/Fix-/21/125 21/125 11/63 13/75 10/58

Floatingpoint in nanoseconds)

Number range: FB, FC, 2047 8191DB 4095 8191

Bit memory / Counter / Timer 8192 / 512 / 512 16K / 2K / 2K

Local data loc. (per Prio class configurable) 512Byte 8192Byte (configurable)

I/O Adress area 1024 / 1024Byte 2048 / 2048Byte 8192 / 8192Byte

Process image I/O 128 / 128Byte 8192 / 8192Byte

MPI max. Speed 187,5kBit 12 MBd

Fieldbus: PROFIBUS-DP-Master integrated -- -- 4 4 4 4 4 4 4 4 4

Fieldbus: PROFINET-Master integrated -- -- -- -- -- -- -- 4 -- -- 4

Feldbus: ETHERCAT-Master integriert -- -- -- -- -- -- -- -- -- -- --

PtP 4 4 4 -- -- -- -- -- -- -- --

PtP on PROFIBUS jack toggleable -- -- 4 4 4 4 4 4 4 4 4

PtP on PROFIBUS jack/MPI jack toggleable -- -- -- 4 -- -- -- -- -- -- --

Ethernet PG/OP-Port integrated/Connections 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4

Ethernet CP 343 integrated/Connections -- / -- -- / -- -- / -- -- / -- -- / -- -- / -- 4/ 32 4/ 32 -- / -- 4/ 32 4/ 32

ISOonTCP/ISO(H1)/S7/TCP/UDP Connections -- -- -- -- -- -- 8 8 -- 64 24

MOTION-axis integrated -- -- -- -- -- -- -- -- -- -- --

VIPA SPEED-BUS -- -- -- -- 4 -- -- -- 4 4 4

AI / AO/ Pt100 -- / -- / -- 4 / 2 / 1 4 / 2 / 1 4 / 2 / 1 4 / 2 / 1 -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

DI / DO/ DIO’s 16 / 8 / -- 24 /16 /-- 16 /16 /-- 24 / 16 / 8 8 / -- / 8 -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

Counter / PWM or Stepper (switchable) 2 (10kHz) 3 (30kHz) 3 (30kHz) 4 (60kHz) 4 (100kHz) -- -- -- -- -- --

Dimensions in mm: (W x H x D) 80x125x130 120x125x130 80x125x130 120x125x130 80x125x130 40x125x130 80x125x130

SW010L1MA 0,-

SW010B1MA 333,-

SW010P1MA 777,-

SPEED7 STUDIOIntelligent + intuitive + open = instant entry

SPEED 7 Studio – the new VIPA engineering software, withwhich any SPEED7 controller can be programmed moreeconomically and efficiently.

The new intelligence of the hardware configuration, the intuitiveuser interface and the system openness make SPEED7 Studio thepowerful and easy-to-use tool. Optimize automation tasks, reducedevelopment costs to a minimum, and save time- and cost intensivesoftware training. The user can again focus on his actual engineer-ing tasks.SPEED7 Studio is systematically based on user friendliness. Every-thing has been freshly designed, from the hardware configuration,pogramming and networking to the parametrization of frequencyinverters and drives, and even visualization. All functions, propertiesand libraries are automatically prepared and displayed in the SPEED7Studio editor view. Unique SPEED7 tools make the software attractive and efficient. Highspeed applications are even more economic with the SPEED busfunctions. EtherCAT is fully integrated. The EtherCAT configuratorquickly and safely configures applications, automatically reads themand labels them with standard symbols. Integrated SLIO functiona-lities such as automatic calculation of power consumption andintegrated process image calculation, make SPEED7 Studio a highlyefficient tool that holistically integrates the SPEED7 product spectrum.

PLC

6

SPEED7 SOFTWARE PRICEOrder No.: Description in Euro

1x Software licence SPEED7 Studio LItE for projects up to 128kB, (up to 3 PCs)

1x Software licence SPEED7 Studio BASICfull version, unlimited memory, (up to 3 PCs)

1x Software licence SPEED7 Studio PROfull version, unlimited memory, Motion-Control(up to 3 PCs)

Highlights• Photorealistic Hardware-/Network-Configuration• Intuitive User Interface• Free Window Docking• Tool-Tips• Known S7-Programming Environment• VIPA-specific Blocks• Full integrated Visualization• WEB-Visualizationadditionally SPEED 7 STUDIO BASIC• SCADA-System MOVICONadditionally SPEED 7 STUDIO PRO• Motion-Control using PLCopen Standard• Intuitive Axes Configuration• CAM Editor

VIPA 953-1LE00 98,-VIPA 953-1LF00 147,-VIPA 953-1LG00 217,-VIPA 953-1LH00 309,-VIPA 953-1LJ00 488,-VIPA 953-1LK00 731,-VIPA 953-1LL00 1.023,-VIPA 953-1LM00 1.509,-VIPA 953-1LP00 2.240,-

VIPA

312

SCVI

PA 3

13SC

VIPA

313

SC/D

PMVI

PA 3

14SC

/DPM

VIPA 953-0KX10 € 122,-

VIPA 312-5BE23 505,-

VIPA 313-5BF23 746,-

VIPA 313-6CF23 1.010,-

VIPA 314-6CG23 1.370,-

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

MEMORY CONFIGURATION CARD PRICEOrder No.: Additional memory extension: in Euro

32kByte (16kByte program/16kByte data)

64kByte (32kByte program/32kByte data)128kByte (64kByte program/64kByte data)256kByte (128kByte program/128kByte data)512kByte (256kByte program/256kByte data)1MByte (512kByte programm/512kByte data)2MByte (1MByte programm/1MByte data)4MByte (2MByte program/2MByte data)8MByte (4MByte program/4MByte data)

All cards have a minimum capacity of 512MByte and can be usedadditional for programm backup.

PLC

VIPA CPUs and peripheral modules with the instructionset S7-300® by Siemens are more than 20 times fasterthan the similar S7-300® products. VIPA offers SPEED7,the technology of tomorrow, based on a million timesproven STEP®7-programming platform. A flexible memorymanagement covers all possible applications from 64kByteto 1MByte. Program and data are stored in one memory,no extra loading memory is necessary. A pluggableMMC/SD-Card-Card allows configuration as well as projectand data saving in a FAT16 format compatible with PC.

Ethernet for PG communication, online maintenance andOP communication are always on Board (PtP). The wellknown serial system bus from the S7-300® series bySIEMENS is completely supported and allows the use ofthe S7-300® units of SIEMENS and VIPA. All importantcertifications exist. The complete STEP®7/S7-300®

command set is available and was tested for fullaccuracy, examined from an independent Test institutein extensible test rows.

SPEED7-CPUs PRICEOrder No.: Technical data in Euro

CPU 312SC-SPEED7 technology DC 24V, incl. 128kByte (up to 1MByte),MPI interface, SD slot, clock, 16DI, 16 of it for alarming, 8DO 24VDC/0,5A,  2x counter (10Khz) RS485 interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication.HW identification: 6ES7312-5BE03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

CPU 313SC-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte),MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A, AI 4x12Bit(U/I), 1x12Bit(Pt100), AO 2x12Bit(U/I), 3x counter (30Khz),  RS485 interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication.HW identification: 6ES7313-5BF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

CPU 313SC/DPM-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte),MPI interface, SD slot, clock, 16DI, 16 of it for alarming, 16DO 24VDC/0,5A,  3x counter (30Khz), PROFIBUS-DP master/slaves with 12Mbps and up to 125 slaves, alternative RS485 interface with library for ASCII, StX/EtX, 3964R,Modbus master protocols, Ethernet interface for PG/OP communication.HW identification: 6ES7313-6CF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

CPU 314SC/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2MByte),MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A+8 DI/O in adition, AI 4x12Bit(U/I), 1x12Bit(Pt100), AA 2x12Bit(U/I), 4x counter (60Khz),PROFIBUS-DP master/slave with 12Mbps and up to 125 slaves, alternative RS485interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols,Ethernet interface for PG/OP communication.HW identification: 6ES7314-6CG03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

MCC-MEMORY CONFIGURATION CARDVIPA MCC offers the possibility to extend the RAM ofSPEED7 CPUs. The MCC is a specifically prepared MMC(multimedia Card). Plug the MMC into the card slot andexecute an overall reset and the extension becomesavailable. The MCC must remain plugged in, otherwisethe CPU switches to STOP after 48 hrs.

The MCC can’t be exchanged to a MCC with the samememory configuration, but it can be used for the projectbackup (Copy RAM > ROM). The shown MCC memoryvalue increases the already available basic memory ofthe CPU by the value of the card. However, the maximummemory shown of the CPU can’t be overridden, even if abigger memory extension is plugged in.

SPEED7 BY VIPA – VERY FAST STEP®7 / TIA PROGRAMMABLE CPUs

SPEED7-TECHNOLOGY – compatible SIEMENS S7-300®

CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

MMC flashcard, 512MByte, only forprogram back up, recommended ifno MCC-Card is used.

17

VIPA

315

SNVI

PA 3

15SB

VIPA 314-2BG23 513,-

VIPA 314-2AG23 922,-

VIPA 315-2AG23 1.278,-

VIPA 315-4NE13 1.834,-

VIPA 315-4PN23 1.834,-

VIPA 315-4PN43 997,-

80mm

125mm

120mm

40mm

125mm

120mm

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

SPEED7-TECHNOLOGY – compatible SIEMENS S7-300®

CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

VIPA CPUs and peripheral modules with instruction set S7-300®/S7-400® by Siemensare faster than the currently strongest S7-300®, S7-400® systems. VIPA offersSPEED7, the technology of tomorrow, based on a million times proven STEP®7-programming platform. A flexible memory management covers all possible appli-cations from 64kByte to 8MByte. Program and data are stored in one memory, sono extra loading me mory is necessary. A pluggable MMC/SD-Card allows configu-ration as well as project and data secu rity in a FAT16 format compatible with PC. PROFIBUS-DP master or optional master CANopen and Ethernet for PG communi-cation, on-line maintenance and OP communication are al ways on Board (PtP).

In addition, an EthernetCP is able to become in tegrated directly into the CPU cabinet,compatible with CP343, 10/100Mbps.The well known serial system bus from the S7-300® series by Siemens iscompletely supported and allows the use of the S300® units of SIEMENS and VIPA.Not only are 8 modules able to be switched on, but also the CPUs support to driveup to 32 modules in a line. All relevant certifications exist. The complete STEP®7/S7-300®/400®er commandset is available and has been examined by an independent test institute inextensible test rows to ensure complete accuracy.

SPEED7-CPUs PRICEOrder No.: Technical data in Euro

CPU 314SE/DPS-SPEED7 technology, DC 24V, incl. 256kByte (up to 1MByte), MPI-interface, SD-slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP-Slave or RS485, PtP-Communication for ASCII-, StX/EtX-, 3964R-, ModbusRtU master protocol with library. 32 I/O-units per lineHW identification: 6ES7315-2AG10-0AB0/V2.6 + 6GK343-1EX11-0XE00

CPU 314SB/DPM-SPEED7 technology, DC 24V, incl. 512kByte (up to 1MByte), MPI interface, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 315SB/DPM-SPEED7 technology, DC 24V, incl. 1MByte (up to 4 MByte), MPI interface, SD slot, clock, Ethernet interface for PG/OP communication,  PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 315Sn/nEt-SPEED7 technology, DC 24V, 1MByte (up to 2 MByte),MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication, PROFIBUS-DP master, 12MBd, up to 125 Slaves, add. integrated Ethernet-CP 343 with RFC1006, tCP/IP and S7 communication for 8 connections. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00 + 6GK343-1EX21-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

315Sn/nEt-SPEED7 technology, DC 24V, incl. 1MByte (up to 2 MByte),MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication,    PROFInEt- & PROFIBUS-DP master, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP and S7 communication for 8 connections. 32 I/O-units per lineHW identification: 6ES7315-2EH13-0AB0 + 6GK343-1EX11-0XE00

315Sn/nEt-SPEED7 technology, DC 24V, incl. 512kByte, MPI interface,SD slot, clock, Ethernet interface for PG/OP-Communication,    PROFInEt-master, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP and S7 communication for 8 connections. RS485 interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols. 32 I/O-units per lineHW identification: 6ES7315-2EH13-0AB0 V2.6 + 6GK343-1EX11-0XE00

SPEED7 BY VIPA – VERY FAST STEP®7 / TIA PROGRAMMABLE CPUs

PLC

18

VIPA 314-6CF23 1.329,-

VIPA 317-2AJ23 1.988,-

VIPA 317-4NE23 3.060,-

VIPA 317-4PN23 3.060,-

VIPA 342-1CA70 763,-

VIPA 342-1DA70 814,-

VIPA 342-1IA70 814,-

VIPA 342-2IA71 1.432,-

VIPA 343-1EX71 1.103,-

VIPA 321-1BH70 195,-

VIPA 322-1BH70 216,-

VIPA 323-1BH70 238,-

VIPA 331-7AF70 693,-

VIPA 331-7BF70 693,-

VIPA 307-1FB70 161,-

VIPA 391-1AF10 142,-

VIPA 391-1AF30 171,-

VIPA 391-1AF50 193,-

VIPA 391-1AJ10 142,-

VIPA 391-1AJ30 171,-

VIPA 391-1AJ50 193,-

VIPA

317

SN

VIPA

314

STVI

PA 3

22-1

BH70

VIPA

342

-1CA

70

VIPA

343

-1EX

71

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

SPEED BUS PERIPHERAL MODULES PRICEOrder No.: Technical data in Euro

Speed bus, CAnopen master RS485, 320 Bytes, up to 127 CAn knots.

Speed bus, PROFIBUS-DP master RS485, 12 MBaud, up to 125 Slaves.

Speed bus, interbus master, RS422, Dual port master,up to 512 subscribers, number of the process data: In 1920 binary I/Os.

Speed bus, 2x interbus master, 2x RS422, Dual port master,up to 512 subscribers, number of the process data: In 1920 binary I/Os.

SPEED-Bus, CP343S tCP/IP-Ethernet CP, S7 communication,  RFC1006, H1, tCP/IP, UDP, up to 16 connections.  

SM 321S-FASt SPEED-Bus, digital input DI 16xDC 24V, 2,56µs to 40ms adjustable.

SM321S-FASt SPEED-Bus, digital output tH 16x DC 24 V, 0.5A, 100kHz

n.M. 321S-FASt speed bus, digital input DI/O 16xDC24V, digital output DO0,5A, 100 kHz, 2.56 µs to 40ms adjustable.

SM 331S-FASt SPEED-Bus, analog supported input AI 4x16Bit, 100µsec per channel,+/- 20mA, adjustable 32 kByte cache memories per channel after trigger. 

n.M. 331S-FASt speed bus, analog input AI 8x16Bit, 100 µs per channel,+/-10 V, adjustable 32 kByte cache memory per channel after trigger. 

SPEED BUS POWER SUPPLY

PS307 power supply unit, only for SPEED-BUS units,Input:110...240VAC, Output: 24VDC, 6...12A

Order No.: SPEED BUS PROFILE RAILSPRICEin Euro

530 mm for 2 high-speed extension slots

530 mm for 6 high-speed extension slots

530 mm for 10 high-speed extension slots

830 mm for 2 high-speed extension slots

830 mm for 6 high-speed extension slots

830 mm for 10 high-speed extension slots

SYSTEM COMPONENTS FOR SPEED BUSTo be able to use the high-speed system performance fully, up to 10 VIPA moduleswith the new VIPA 32bit highspeed-bus (40 MByte/s) can be connected to the leftside of the CPU. Very fast E/A units and counters as well as PROFIBUS-DP master and

Interbus master units are available. Any of the VIPA High-Speed CPUs will beconnected to the SPEED Bus rail. With the Standard-Bus, any VIPA or Siemensmodules can quickly and easily be placed to the right.

SPEED7-CPUs FOR SPEED-BUS PRICEOrder No.: Technical data in Euro

CPU 314St/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2 MByte),  MPI interface,SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication,  DI 8-16 / DO 8-0, AI 4, AO 2, 1 Pt100, 4 counters (100 kHz),PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 317SE/DPM-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication,PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 317Sn/nEt-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte),  MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master, 12MBd, up to 125 Slaves, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP, S7 communication for max. 64 connections. 32 I/O-units per lineHW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00 + 6GK343-1EX21-0XE00On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 317Sn/nEt-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, PROFInEt & PROFIBUS-DP-Master, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP, S7 communication for max. 16 connections. 32 I/O-units per lineHW identification: 6ES7317-2EK13-0AB0 + 6GK343-1EX11-0XE00

SPEED7-TECHNOLOGY – compatible SIEMENS S7-300®

CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

PLC

19

6ES7321-1BH01-0AA0 VIPA 321-1BH01 119,-

6ES7321-1BL00-0AA0 VIPA 321-1BL00 239,-

6ES7321-1FH00-0AA0 VIPA 321-1FH00 162,-

6ES7322-1BF01-0AA0 VIPA 322-1BF01 140,-

6ES7322-1BH01-0AA0 VIPA 322-1BH01 165,-

6ES7322-1BH01-0AA0 VIPA 322-1BH41 24VDC/2A 212,-

6ES7322-1BL00-0AA0 VIPA 322-1BL00 331,-

6ES7322-1HH01-0AA0 VIPA 322-1HH00 246,-

6ES7322-5FF00-0AB0 VIPA 322-5FF00 227-

6ES7323-1BL00-0AA0 VIPA 322-1BH60 854,-6ES7323-1BH01-0AA0 VIPA 323-1BH01 182,-

6ES7323-1BL00-0AA0 VIPA 323-1BL00 309,-

6ES7 331-1KF01-0AB0 VIPA 331-1KF01 328,-

6ES7331-7KB01-0AB0 VIPA 331-7KB01 183,-

6ES7331-7KF01-0AB0 VIPA 331-7KF01 468,-

6ES7332-5HB01-0AB0 VIPA 332-5HB01 305,-

6ES7332-5HD01-0AB0 VIPA 332-5HD01 390,-

6ES7334-0KE00-0AB0 VIPA 334-0KE00 288,-

VIPA 353-1DP01 204,-

VIPA 341-1AH01 720,-

VIPA 341-1CH01 774,-

VIPA 343-2AH10 510,-

VIPA 343-2AH10

VIPA 353-1DP01

VIPA 332-5HD01

VIPA 321-1BH01VIPA 322-1BL00

VIPA 341-1CH01

40mm

PLC

DIGITAL INPUTIdentification Order No.: In- PRICESIEMENS VIPA puts in Euro

1624VDC32

24VDC16

120/230VAC

DIGITAL OUTPUTIdentification Order No.: Out- PRICESIEMENS VIPA puts in Euro

8 trans. outputs24VDC/2A

16 trans. outputs24VDC/1A

16 trans. outputs

32 trans. outputs24VDC/1A

16 Rel. outputs24VDC/230V/5A

8 triac. outputs120/230VAC/2A

16 trans. outputs1 input manual

16 switsches A/H

DIGITAL INPUT AND OUTPUTIdentification Order No.: Inputs & PRICESIEMENS VIPA Outputs in Euro

8/8

16/16

Identification Order No.: ANALOG INPUT/OUTPUT PRICESIEMENS VIPA Technical data in Euro

Analog input, 8x13Bit, 4 conductors, ±50, ±500mV, ±1, ±5, ±10V, 1...5V, 0...10V,±20mA, 0...20mA, 4...20mA, 0...600/6000Ohm, Pt100,  ni100/1000

Analog input, 2x14Bit ±80, ±250, ±500mV, ±1V, ±2,5V, ±5V, ±10V, 1...5V,10MOhm, ±10mA, ±20mA, ±3,2mA, 0...20mA, 4...20mA,150/300/600 Ohm,  Pt100, ni100, thermocouples J,R,K,n,L,E,t,S,B,C

Analog input, 8x14Bit ±80, ±250, ±500mV, ±1V, ±2,5V, ±5V, ±10V, 1...5V, 10MOhm, ±10mA, ±20mA, ±3,2mA, 0...20mA, 4...20mA,150/300/600 Ohm, Pt100, ni100, thermocouples J,R,K,n,L,E,t,S,B,C

Analog output, 2x 13Bit, 0...10V, ±10V, 1...5V, 4...20mA, ±20mA, 0...20mA. Default value can be activated at PLC stop

Analog output, 4x 13Bit, 0...10V, ±10V, 1...5V, 4...20mA, ±20mA, 0...20mA. Default value can be activated at PLC stop

Analog input/output, 4 input/12Bit, 0...10V, Pt100 (RtD-4L), 0...10kOhm, 2 output/12Bit, 0...10V

SYSTEM 300V – compatible SIEMENS S7-300®

Modules – I/O-Modules, CPs & Fieldbus-Units

PROFIBUS SLAVE ADAPTOR PRICEOrder No.: Technical Data in Euro

DP-Slave, 1 DP-connection, DP-V0, V1, max. 32 units / lines

COMMUNICATION PROCESSORS PRICEOrder. No.: Technical Data in Euro

RS232, SubD 9 pol., potential decoupled, ASCII, 3964R

RS422/485, SubD 9 pol., potential decoupled, ASCII, 3964R

AS-i-Master, Profil M3, max. 62 Slaves

20

VIPA 390-1AB60 18,-VIPA 390-1AE80 28,-VIPA 390-1AF30 33,-VIPA 390-1AJ30 44,-VIPA 390-1BC00 76,-VIPA 390-9BC00 672,-

VIPA 392-1AJ00 24,-VIPA 392-1AM00 36,-VIPA 922-3BC50 48,-VIPA 922-3BD20 49,-VIPA 922-3BF00 55,-VIPA 922-6BC50 74,-VIPA 922-6BD20 75,-VIPA 922-6BF00 81,-

VIPA 307-1BA00 105,-

VIPA 307-1EA00 131,-

VIPA 307-1KA00 173,-

VIPA 950-0KB31

VIPA 953-1LE00 98,-VIPA 953-1LF00 147,-VIPA 953-1LG00 217,-VIPA 953-1LH00 309,-VIPA 953-1LJ00 488,-VIPA 953-1LK00 731,-VIPA 953-1LL00 1.023,-VIPA 953-1LM00 1.509,-VIPA 953-1LP00 2.240,-

VIPA 953-0KX10 122,-

VIPA 950-0KB01 202,-

VIPA 950-0KB31 256,-

VIPA

307

-1BA

00

VIPA

307

-1EA

00

SYSTEM 300V – compatible SIEMENS S7-300®

Accessories – memory cards, profile rails, connectors, power supplies

PROFILE RAILS PRICEOrder No.: Length max. mounting in Euro

160mm 1 CPU / 1 Unit

482mm 1 CPU / 8 Unit530mm 1 CPU / 10 Unit

830mm 1 CPU / 16 Unit2000mm 1 rail

2000mm ECO-stack, 10 rails

FRONT CONNECTOR PRICEOrder No.: Technical data in Euro

20-pole with screw contact40-pole with screw contact20-pole with 2,5m cable20-pole with 3,2m cable20-pole with 5,0m cable40-pole with 2,5m cable40-pole with 3,2m cable40-pole with 5,0m cable

POWER SUPPLIES PRICEOrder No.: Technical data in Euro

Primary: 100-230VAC, Secondary: DC 24V, 2,5A

Primary: 100-230VAC, Secondary: DC 24V, 5A

Primary: 110...240VAC, Secondary: DC 24V, 10A

MEMORY CONFIGURATION CARDS PRICEOrder No.: Additional memory extension: in Euro

32kByte (16kByte program/16kByte data)

64kByte (32kByte program/32kByte data)

128kByte (64kByte program/64kByte data)

256kByte (128kByte program/128kByte data)

512kByte (256kByte program/256kByte data)

1MByte (512kByte programm/512kByte data)

2MByte (1MByte programm/1MByte data)

4MByte (2MByte program/2MByte data)

8MByte (4MByte program/4MByte data)

All cards have a minimum capacity of 512MByte and can be usedadditionally for program back-up.

PLC

21

MMC-FLASHCARDPRICE

Best. Nr.: in Euro

512MByte flashcard, only for program back-up,recommended if no MCC-Card is used.

PROGRAMMING ADAPTERSPRICE

Best. Nr.: in Euro

S7-MPI adaptor for PC/RS 232COM interfaces, automatic Baud rate setting 9.6 - 115 kBaud,suitable for the use with StEP®7 by SIEMEnS, Cable length MPI 1.2m, serial cable 3m, Supply via CPU, PG interface.

S7-MPI adaptor for PC USB interface, incl. USB driver suitable for the use with StEP®7 of SIEMEnS,Cable length MPI 1.2m, serial cable 3m,supply via USB-interface. (Win7 32 bit)