SPECIAL INFORMATION - ABsupply.net · 2015. 4. 14. · NO SCALE No Scale No Scale OUTSWING SILL...
Transcript of SPECIAL INFORMATION - ABsupply.net · 2015. 4. 14. · NO SCALE No Scale No Scale OUTSWING SILL...
-
© Complete Catalogue Copyright 2005 Draftseal
SPECIAL INFORMATIONMetals, Alloys, Finishes & Components
All aluminum extrusions are alloy 6063T5 and are furnished in mill finish. Some are available in clear anodized, bronzeanodized, gold anodized and bright dip gold anodized finishes. Certain extrusions are available in solid bronze (brass)
All cold temperature vinyl (p.v.c.) inserts are extruded from pure vinyl raw material.This vinyl is suitable for use in cold areas.
Some inserts are available in thermal plastic elastomer material (TPE). This Synprene (TPE) material has low temperatureflexibility (remains flexible down to -80°F) (-50°C). It has excellent U.V. stability and resistance to compression set. It is designedfor applications requiring non flammability. It also has good chemical resistance to alcohols, acids and bases.
All PVC Rigid profiles are extruded from PVC raw materials and are available in Solid Brown (B), White (W), Grey (G), and Black(BL) as indicated. Some profiles are extruded as Dual Durometer (Flexible and Rigid PVC fused together).
All thresholds are punched and countersunk for #10 Robertson flat head wood screws. Plated screws and plastic anchors ofappropriate length are furnished with all aluminum and oak thresholds at no charge. All weatherstrip is punched with slottedholes for #6 truss head self drilling screw. Plated screws of appropriate length are furnished with all weatherstrip at no charge.Antique bronze-plated screws of appropriate length are furnished with all bronze anodized weatherstrip and thresholds at nocharge. Solid brass screws supplied with all solid brass products and yellow zinc screws supplied with gold anodized and brightdip gold products.
DraftSeal products are guaranteed for 1 year against defects in material or workmanship, except for foam and neoprene tapeswhich are guaranteed for 60 days. Defective goods shall be replaced, however, no claims for damage incurred or work donetheron shall be allowed.
Please order material by catalogue number, specifying length required and number of pieces. Most weatherstrip andthresholds are stocked in standard sizes and most are available in lengths up to 15 ft. Thresholds are cut on 6” increments with1/2” to 1” extra for trimming to size. For exact size, order threshold or weatherstrip to specified length followed by “NET”.Weatherstrip and thresholds ordered under 36” (914mm) will be charged out as 36” (914mm) and product ordered over 144”(3657mm) will be charged out as 180” (4572mm).
SymbolsThese symbols are shown adjacent to products throughout the catalogue so that one can readily identify and select products which meetspecification and/or code requirements.
Aluminum
Vinyl Inserts(Flexible)Synprene(Flexible)
Vinyl(Rigid)Screws
Guarantee
OrderingInformation
Tested in accordance with CAN/ULC S104,ASTM E-152, CFSM 43.7, NFPA 252,UBC 7-2-1997 (formerly UBC 43-2-1991),UL 10(b).
LISTED FOR CANADA AND USA
Products indicated by this symbol are listed and labeled as gasketingmaterial for use on listed steel frames and/or listed swinging type firedoors of the hollow metal type or steel covered composite type orwood core fire doors rated up to 11?2 hours. These products have beenlisted and labeled as a result of testing done by Warnock Herseycertifying that these gasketing products do not adversely affect the fireresistance of the door or frame. Products are regularly checked underthe follow-up factory inspection and certification service formanufacturing compliance with Warnock Hersey specifications. ContactA.K. Draft Seal Ltd. for further information.
Tested in accordance with CAN/ULC S104,ASTM E-152, CFSM 43.7, NFPA 252,UBC 7-2-1994 (formerly UBC 43-2-1991),UL 10(b).
LISTED FOR CANADA AND USAALUMINUM CLAD WOOD SILLS – 20 MINUTE
For Use With Listed Wood or Metal Frames and Listed SwingingType Fire Doors of Wood or Steel Faced Construction, 20 MinuteRated.These products have been Listed and Labelled as a result of testingdone by Warnock Hersey certifying that these sill products do notadversely affect the fire resistance of the door or frame. Productsare regularly checked under the follow-up factory inspection andcertification service for manufacturing compliance with WarnockHersey specifications.Contact A.K. DraftSeal Ltd. for further information.
20 MIN.
10C
S
UL10B CLASSI FIED, complies with NFPA 252 for application to Hollow Metal �re doors rated up to 3 Hrs., and Wood �redoors rated up to 1 1/2 hrs. (Rating on some items v ary and are noted.)
POSI TI VE PRESSURE UL10C CLASSI FIED , Category ‘J’ lis ted. Complies with I BC, UBC7-2 ( 1997) for application to Positive Pressure Hollow Metal �re doors rated up to 3 Hrs., and Wood Fire doors rated up to 1-1/2 Hrs. (Ratings on some items varyand are noted.)
EDGE SEALI NG SYSTEM, Category ‘G’ listed. REQUIRED for Category B listed wood �re doors to meet positive pressure requirementscomplying with I BC, UBC7-2 ( 1997) Part 1 . See individual products for maximum door size and ratings. and/or
SMOKE & DRAFT CONTROL GASKETI NG. Category ‘H’ listed, complies with I BC, UBC7-2 ( 1997) Part 2, UL1784 (2001), NFPA 105 (1999) for use on all ‘S’ labeled Positive Pressure doors. and /or
ACOUSTICAL TESTED to ASTM E90-97 and ASTM E413-94, by Riverbank Acoustical Laboratories in Geneva, I L.
AI R I NFILTRATI ON TESTED to ASTM E283 and S.D. I . 116.
ESS
28H7C US
28H7
28H7
28H7
ADA COMPLIA NT Barrier Free Thresholds meet the requirements of ADAAG-1998, and I CC/ANSI A117.1-1998.
-
1A.K. DRAFT SEAL LTD.
LOUVRES . . . . . . . . . . . . . .36VISION LITES . . . . . . . . . . .36DS9BSTRIKE . . . . . . . . 21, 37DS9CSTRIKE . . . . . . . . 21, 37DSS11 SERIES . . . . . . . . . .28DS12OAK . . . . . . . . . . . . . .6DS12VE . . . . . . . . . . . . . . . .6DS12BLE . . . . . . . . . . . . . . .6DS19 SERIES . . . . . . . . 21, 37DS19VE . . . . . . . . . . . . . . . .6DS37 SERIES . . . . . . . . . . .34DS44 SERIES . . . . . . . . . . .28DS55D SERIES . . . . . . . . . .28DS61-50 . . . . . . . . . . . . . . .35DS62-50 . . . . . . . . . . . . . . .35DS63-50 . . . . . . . . . . . . . . .35DS65-25 . . . . . . . . . . . . . . .35DSS66 SERIES . . . . . . . . . .28DS67-50 . . . . . . . . . . . . . . .35DS74-25 . . . . . . . . . . . . . . .35DS76-12.5 . . . . . . . . . . . . .35DS78-50 . . . . . . . . . . . . . . .35DS79-12.5 . . . . . . . . . . . . .35DS95 . . . . . . . . . . . . . . . . .10DS100 SERIES . . . . . . . . . .29DS103 SERIES . . . . . . 29, 32DS104 SERIES . . . . . . . . . .29DS106 SERIES . . . . . . . . . .29DSP108-20 . . . . . . . . . . . . .23DSP108-35 . . . . . . . . . . . . .23DSPF109 . . . . . . . . . . . . . .23DS110 SERIES . . . . . . . . . .27DS112 SERIES . . . . . . . . . .29DS113 SERIES . . . . . . 29, 32DS114 SERIES . . . . . . . . . .29DS116 SERIES . . . . . . . . . .29DS117 SERIES . . . . . . . . . .29DS118 SERIES . . . . . . .10, 29DS120 . . . . . . . . . . . . . . . .12DS121 SERIES . . . . . . . . . .12DS122 SERIES . . . . . . . . . .12DS124 SERIES . . . . . . . . . .25DS125 SERIES . . . . . . . . . .25DS127 SERIES . . . . . . . . . .25DS128 SERIES . . . . . . . . . .25DS129 SERIES . . . . . . . . . .25DS130 SERIES . . . . . . . . . .28DS131 SERIES . . . . . . . . . .28DS132 SERIES . . . . . . . . . .28DS133 SERIES . . . . . . . . . .29DS134 SERIES . . . . . . . . . .28DS135 SERIES . . . . . . . . . .27DS136 SERIES . . . . . . . . . .27DS137 SERIES . . . . . . . . . .32DS138 SERIES . . . . . . . . . .27DS139 SERIES . . . . . . . . . .28DS140 SERIES . . . . . . . . . .27DS142 SERIES . . . . . . . . . .28DS143 SERIES . . . . . . . . . .29DS144 SERIES . . . . . . . . . . 34DS146 SERIES . . . . . . . . . .34DS147 SERIES . . . . . . . . . .32DS148 SERIES . . . . . . 31, 32DS149 SERIES . . . . . . . . . .31DS150 SERIES . . . . . . . . . .31DS151 SERIES . . . . . . . . . .32DS156 SERIES . . . . . . . . . .27DS161 SERIES . . . . . . . . . .30DS162 SERIES . . . . . . . . . .30DS163 . . . . . . . . . . . . . . . .32DS164 SERIES . . . . . . . . . .30
DS166 SERIES . . . . . . . . . .30DS170 . . . . . . . . . . . . . . . .29DS171 SERIES . . . . . . . . . .16DS174 SERIES . . . . . . . . . .16DS176 SERIES . . . . 10,11,19DS177 SERIES . . . . . . .14,16DS178 SERIES . . . . . . . . . .16DS179 SERIES . . . . . . . . . .33DS180 SERIES . . . . . . 21, 33DS181 SERIES . . . . . . . . . .21DS183 SERIES . . . . . . . . . .33DS184 SERIES . . . . . . 33, 34DS185 SERIES . . . . . . 21, 33DS186 SERIES . . . . . . . . . .33DS187 SERIES . . . . . . . . . .33DS188 SERIES . . . . . . . . . .33DS190 SERIES . . . . . . . . . .21DS191P . . . . . . . . . . . . . . .21DS192C . . . . . . . . . . . . . . .21DS195 . . . . . . . . . . . . . . . .21DS196P . . . . . . . . . . . . . . .21DS197C . . . . . . . . . . . . . . .21DS200-17BL . . . . . . . . . . .31DS200-21BL . . . . . . . . . . .31DS201 . . . . . . . . . . . . . . . .14DS202TB . . . . . . . . . . . . . .14DS205TBI . . . . . . . . . . . . . .15DS208 . . . . . . . . . . . . . . . . 34DS210 SERIES . . . . . . . . . .24DS211AV . . . . . . . . . . . . . 24DS212 SERIES . . . . . . . . . .24DS216 SERIES . . . . . . . . . .24DS217 SERIES . . . . . . . . . .24DS218 SERIES . . . . . . . . . .15DS221OAK . . . . . . . . . . . .17DS222 SERIES . . . . . . . . . .12DS223 SERIES . . . . . . . . . .17DS225 SERIES . . . . . . . . . .25DS228 . . . . . . . . . . . . . . . .25DS229 SERIES . . . . . . . . . .25DS234 . . . . . . . . . . . . . . . .24DS236 SERIES . . . . . . . . . .12DS238SS . . . . . . . . . . . 27, 34DS243SS . . . . . . . . . . . . . . 34DS250 . . . . . . . . . . . . . . . .10DS252KFSD81 . . . . . . . . . .22DS264KFDD36 . . . . . . . . .22DS265KFDD81 . . . . . . . . .22DS275TB . . . . . . . . . . . . . .14DS276TBN . . . . . . . . . . . . .14DS277 SERIES . . . . . . . . . .14DS333 . . . . . . . . . . . . . . . .12DS335 SERIES . . . . . . . . . .26DS336 SERIES . . . . . . . . . .26DS338 SERIES . . . . . . . . . .30DS339 SERIES . . . . . . . . . .30DS340 SERIES . . . . . . . . . .30DS341 SERIES . . . . . . . . . .30DS342 SERIES . . . . . . . . . . 26DS343 SERIES . . . . . . . . . .26DS344 SERIES . . . . . . . . . . 26DS345 SERIES . . . . . . . . . .20DS346 SERIES . . . . . . . . . .20DS347 SERIES . . . . . . . . . .20DS348 SERIES . . . . . . . . . .20DS348HSS . . . . . . . . . . .3, 20DS350 . . . . . . . . . . . . . . . .15DS351MAPLE . . . . . . . . . .17DS351OAK . . . . . . . . . . . .17DS353 SERIES . . . . . . . . . .17DS369 SERIES . . . . . . . . . .32
DS388 . . . . . . . . . . . . . . . .37DS400 . . . . . . . . . . . . . . . .10DS401TB . . . . . . . . . . . . . .15DS415 SERIES . . . . . . . . . .29DS416 . . . . . . . . . . . . . . . .23DS418 SERIES . . . . . . . . . .22DS421 SERIES . . . . . . . . . .23DS422 SERIES . . . . . . . . . .31DS425 SERIES . . . . . . . . . .23DS426 SERIES . . . . . . . . . .23DS430 SERIES . . . . . . . . . .22DS434 SERIES . . . . . . . . . .22DS435 . . . . . . . . . . . . . . . .23DS439 . . . . . . . . . . . . .22, 37DS444 SERIES . . . . . . 12, 13DS457 SERIES . . . . . . . . . . .2DS459 SERIES . . . . . . . . . . .2DS460SP . . . . . . . . . . . . . . .3DS500 SERIES . . . . . . . . 9, 10DS501TB . . . . . . . . . . . . . .15DS502TBFG . . . . . . . . . . . .15DS505 SERIES . . . . . . . . . .10DS510SS . . . . . . . . . . . 12, 34DS511SPC . . . . . . . . . . . . . .6DS512 GASKET . . . . . . . . . .6DS512 SERIES . . . . . . . . . . .6DS519HV . . . . . . . . . . . . . . .6DS533 . . . . . . . . . . . . . . . .27DS538V . . . . . . . . . . . . . . . .9DS555H . . . . . . . . . . . . . . .13DS578 SERIES . . . . . . . . . . .5DS579SPC . . . . . . . . . . . . . .5DS600 SERIES . . . . . . . . 9, 10DS601TB . . . . . . . . . . . . . .15DS602TB . . . . . . . . . . . . . .15DS603TB . . . . . . . . . . . . . .14DS605 SERIES . . . . . . . . . .16DS606 SERIES . . . . . . . . . .16DS612 GASKET . . . . . . . . . .6DS612 SERIES . . . . . . . . . . .6DS619HV . . . . . . . . . . . . . . .6DS633 . . . . . . . . . . . . . . . .27DS644C . . . . . . . . . . . . . . .37DS655T . . . . . . . . . . . . . . .37DS657 SERIES . . . . . . . . . . .2DS659 SERIES . . . . . . . . . 2, 3DS666H . . . . . . . . . . . . . . .13DS670DS . . . . . . . . . . . . . .37DS672DP . . . . . . . . . . . . . .37DS680BRASS . . . . . . . . . . .37DS682 SERIES . . . . . . . . . .37DS700 SERIES . . . . . . . . 9, 10DS701TB . . . . . . . . . . . . . .15DS703TB . . . . . . . . . . . . . .14DS711SPC . . . . . . . . . . . . . .7DS712 GASKET . . . . . . . . . .6DS712 SERIES . . . . . . . . . . .7DS719HV . . . . . . . . . . . . . . .6DS738V . . . . . . . . . . . . . . . .9DS777H . . . . . . . . . . . . . . .13DS778 SERIES . . . . . . . . . . .5DS779SPC . . . . . . . . . . . . . .5DS795 SERIES . . . . . . . . . . .5DS800 SERIES . . . . . . . . 9, 10DS801TB . . . . . . . . . . . . . .15DS803TB . . . . . . . . . . . . . .14DS804TB . . . . . . . . . . . . . .14DS812 GASKET . . . . . . . . . .6DS812 SERIES . . . . . . . . . . .7DS819HV . . . . . . . . . . . . . . .6
DS831 THROUGH TODS885 W/S TAPES . . . . . .35DS858 . . . . . . . . . . . . . . . . .5DS900 SERIES . . . . . . .18, 19DS903TB . . . . . . . . . . . . . .14DS912 SERIES . . . . . . . . . . .8DS912TVE . . . . . . . . . . . . . .9DS1000 SERIES . . . . . .18, 19DS1003TB . . . . . . . . . . . . .14DS1100 SERIES . . . . . .18, 19DS1112 SERIES . . . . . . . . . .3DS1113 SERIES . . . . . . . . . .3DS1114OAK/HTV . . . . . . . .8DS1114 SERIES . . . . . . . . . .3DS1122 SERIES . . . . . . . . . .3DS1123 SERIES . . . . . . . . . .3DS1200 SERIES . . . . . .18, 19DS1300 SERIES . . . . . .18, 19DS1314OAK/HTV . . . . . . . .8DS1400 SERIES . . . . . .18, 19DS2000 SERIES . . . . . . . . .11DS2514V . . . . . . . . . . . . . . .4DS2578V . . . . . . . . . . . . . . .4DS2600 SERIES . . . . . . . . .25DS2626 SERIES . . . . . . . . .37DS2636 . . . . . . . . . . . . . . . .4DS2648 . . . . . . . . 8, 9,17,19DS2700 SERIES . . . . . . . . .25DS2702 SERIES . . . . . . . . .25DS2714V . . . . . . . . . . . . . . .4DS2778V . . . . . . . . . . . . . . .4DS3000 SERIES . . . . . . . . .11DS3333 SERIES . . . . . . . . .13DS4000 SERIES . . . . . . . . .11DS4444 SERIES . . . . . . . . .13DS5000 SERIES . . . . . . . . .11DS5005 . . . . . . . . . . . . . . .11DS5006SS . . . . . . . . . . . . .17DS5007SS . . . . . . . . . . . . .17DS5008A . . . . . . . . . . . . . .17DS5009A . . . . . . . . . . . . . .17DS5555 SERIES . . . . . . . . .13DS6000 SERIES . . . . . . . . .11DS6666 SERIES . . . . . . . . .13DS7000 SERIES . . . . . . . . .11DS7520-270G . . . . . . . . . .35DS7530-270G . . . . . . . . . .35DS7535-270G . . . . . . . . . .35DS7540-270G . . . . . . . . . .35DS7545-270G . . . . . . . . . .35DS7550-270G . . . . . . . . . .35DS7145-270B . . . . . . . . . .35DS7445-270W . . . . . . . . .35DS7620-187G . . . . . . . . . .35DS7630-187G . . . . . . . . . .35DS7777 SERIES . . . . . . . . .13DS8000 SERIES . . . . . . . . .11DS8635-360G . . . . . . . . . .35DS8625-430G . . . . . . . . . .35DS8635-430G . . . . . . . . . .35DS8645-430G . . . . . . . . . .35DS9000 . . . . . . . . . . . .18, 19DS10001 SERIES . . .11,18,19DS11000 . . . . . . . . . . .18, 19DS12000 . . . . . . . . . . .18, 19DS13000 . . . . . . . . . . .18, 19DS14000 . . . . . . . . . . . .18,19DSROD SERIES . . . . . . . . .37DSFLEXTRED SERIES . . . .19LOUVRES . . . . . . . . . . . . . .36VISION LITES . . . . . . . . . . .36
INDEX
-
NO SCALE
No Scale
No Scale
OUTSWING SILLPre-Hung Door Applications
® ® INSWING SILL Pre-Hung Door ApplicationsWater Return
111/16”(42.9mm)
111/16”(42.9mm)
623/32” (170.7mm)
423/32” (119.7mm)
DS659VW Extruded Aluminum Sill / Vinyl Top WhiteDS659DVW Extruded Aluminum Sill / Bronze Anodized / Vinyl Top WhiteDS659DVBL Extruded Aluminum Sill / Bronze Anodized / Vinyl Top Black
weep holes
weep holes
DS228 Doorshoe PVCWhite or Brown
DS659VT Vinyl Top TanDS659DVT Bronze Anodized / Vinyl Top TanDS659VBL Aluminum / Vinyl Top Black
DS459VW Extruded Aluminum Sill / Vinyl Top WhiteDS459DVW Extruded Aluminum Sill / Bronze Anodized / Vinyl Top WhiteDS459DVBL Extruded Aluminum Sill / Bronze Anodized / Vinyl Top Black
DS459VT Vinyl Top TanDS459DVT Bronze Anodized / Vinyl Top TanDS459VBL Aluminum / Vinyl Top Black
DS459 with DS1112 Extension (No Scale)Also available:DS1112 11/2” ExtensionDS1122 2” ExtensionDS1123 2” Extension for DS459 onlyDS1113 3” ExtensionDS1114 4” Extension
SILL END GASKETS
Adhesive BackedDS459GASKET or DS659GASKET FOR DS659 SILL
2 A.K. DRAFT SEAL LTD.
DS459Gasket for DS459 or DS458 Sill
45/8" (117.5mm)
DS459Gasket for DS459 Sill
20 MIN.
20 MIN.
DS457OSVW White Vinyl TopDS457OSDVW Bronze Anodized / White Vinyl TopDS457OSVT Tan Vinyl TopDS457OSDVT Bronze Anodized / Tan Vinyl Top
DS657OSVW White Vinyl TopDS657OSDVW Bronze Anodized / White Vinyl TopDS657OSVT Tan Vinyl TopDS657OSDVT Bronze Anodized / Tan Vinyl Top
Vinyl TopWhite or Tan
63/4” (171.4mm) 11/2”(38.1mm)
11/2”(38.1mm)43/4 (120.6mm)111/16”2.9mm)
111/16”(42.9mm)413/32” (111.9mm)
213/32” (61.1mm)
Vinyl TopWhite or Tan
DS59TVE Tan Replacement Vinyl Top for DS459 & DS659DS59WVE White Replacement Vinyl Top for DS459 & DS659DS59BLVE Black Replacement Vinyl Top for DS459 & DS659
(No Scale)
SILL END GASKETS(No Scale)
Adhesive BackedDS457Gasket for DS457 Sill
SILL END GASKETS(No Scale)
Adhesive BackedDS657Gasket for DS657 Sill
DS659VTCUTS Vinyl Top Tan Cut Lengths Up to 36”DS659VWCUTS Extruded Aluminum Sill / Vinyl Top White Cut Lengths Up to 36”
-
Full Scale Except As Noted
3A. K. DRAFT SEAL LTD.
Full Scale Except As Noted
® ®Water ReturnINSWING SILL Pre-Hung Door Applications
11/2” (38.1mm) 2” (50.8mm)
DS1112 Extruded Aluminum 11/2” ExtensionDS1112D Extruded Aluminum Bronze Anodized
2” (50.8mm)3” (76.2mm)
DS1123 Extruded Aluminum 2” ExtensionDS1123D Extruded Aluminum Bronze AnodizedNote: DS1123 Extension for DS459 only
DS1113 Extruded Aluminum 3” ExtensionDS1113D Extruded Aluminum Bronze Anodized
DS1122 Extruded Aluminum 2” ExtensionDS1122D Extruded Aluminum Bronze Anodized
4” (101.6mm)
DS1114 Extruded Aluminum 4” ExtensionDS1114D Extruded Aluminum Bronze Anodized
SILL EXTENSIONS FOR DS459 AND DS659 (PAGE 2)
Sill Extension eliminates thetime consuming notching onRegular Sill. Snap and screwSill Extension to DS459 orDS659.You choose the length ofthe Sill Horns.
Adding Sill Horns has now been made easy.No more notching.
DS346/348 SeriesAluminum Astragal
DS460SPKit contains one left-handed platform, oneright-handed platform, pile seal andmounting screws. Pile seal is applied to topof platform for optimum sealing againstbottom of wood astragal. When using analuminum astragal, gasket is attached tobottom of astragal. Bottom gasket issupplied with all DS aluminum astragals.
DS190 SeriesWood Astragal
DS348HSS Optional Astragal SealHorseshoe top and bottom seals where astragalmeets sill and head. Mounts to sill and top jamb.
SILL PLATFORM & SEALfor DS459 and DS659 Sills
DS460SPSill toAstragalPlatform
Caulk underplatform toprevent waterleakage throughmounting hole
Mounting holes
Hole forAstragal
Pin
Pile SealbetweenPlatform andbottom ofAstragal
DS460SP
23/8”(60mm)
1/4”(6.4mm)+1/16” - 0
3/8”(9.5mm)
3/8”(9.5mm)
MountingHoles
NoScale
-
20 MIN.
DS2636 NylonEnclosed Thimble Strike For Flush Bolt
57/8” (149.22mm)
7° Slope
111/16”(42.86mm)
Weepholes
• Extruded Dual P.V.C White• 2 Flexible Fins And Bulb Seal• 1 Inner Flexible Fin At Front
Of Door Shoe• 1 FinPile Insert• Weepholes• Rain Drip
Option 2 Screw Ports For FasteningDoor Jamb To End Of Sill
DS2578V Extruded Aluminum Sill / Vinyl Interior Threshold (Tan) For 2x4 WallDS2578DV Bronze Anodized / Vinyl (Tan)
® ®
4 A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
111/16”(42.86mm)
71/4” (184.15mm)
413/32” (102mm)
7° Slope
Position OfFlush Bolt Pin
Door ShoeRefer to page 25
• Extruded Dual PVC White• 2 Inner Flexible Seal Fins• 2 Fin Pile Inserts• 7° Slope To Follow Slope
Of Sill
111/16”(42.86
mm)
51/4” (133.35mm)
DS2514V Extruded Aluminum Sill / Vinyl Interior Threshold (Tan) For 2x4 WallDS2514DV Bronze Anodized / Vinyl (Tan)
DS2514VBL Aluminum Sill / Vinyl (Black)DS2514DVBL Bronze Anodized / Vinyl (Black)
• Extruded Aluminum Sill With 7° Slope• Heavy Base Supports Eliminate The Use Of Wood
Substrate
For 2x6 Wall
111/16”(42.86mm)
DS2778V Extruded Aluminum Sill / Vinyl Interior Threshold (Tan) For 2x6 WallDS2778DV Bronze Anodized / Vinyl (Tan)
77/8” (200.02mm)
7° Slope
Water ReturnINSWING SILL Pre-Hung Door Applications
MILLENIUM SERIES
7° Slope
Weepholes
Door ShoeRefer topage 25
Kerf Insert Not Included With SillOption 2 FastenJamb To ScrewPorts On Both VinylAnd AluminumExtrusions
Option 1Fasten Jamb ToWood End Plugs
213/32” (102mm)
End WoodPlugs A/B Double
SidedGasketUnder Rim
Option 1 Fasten Jamb ToWood End Plugs (Optional)Specify If Required
End Wood Plugs Specify If Required
Water Return Sill
• Screw Ports ForFastening Door JambTo End Of Sill
• Extruded Vinyl InteriorThreshold (Tan)
MILLENIUM SERIES
20 MIN.
20 MIN.
20 MIN.
DS2714V Extruded Aluminum Sill / Vinyl Interior Threshold (Tan) For 2x6 WallDS2714DV Bronze Anodized / Vinyl (Tan)DS2714VBL Aluminum Sill / Vinyl (Black)DS2714DVBL Bronze Anodized / Vinyl (Black)
111/16”(42.86mm)
DS2578SPC Vinyl Protective Sill Cover For DS2578VDS2778SPC Vinyl Protective Sill Cover For DS2778V
NO SCALE
DS78VE Vinyl Replacement Top ThressholdFor DS2578V & DS2778V
-
5A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
OUTSWING SILL Pre-Hung Door Applications ® ®
85/8
”(2
19m
m)
57/8
”(1
49.2
mm
)77
/8”
(200
mm
)
57/ 8
”(1
49.2
mm
)
213 /
32”
(61.
11m
m)
DS579SPC
Rig
idV
inyl
Sill
Pro
tect
or
Co
ver
for
DS5
78Se
ries
ou
tsw
ing
sill.
No
tIn
clu
ded
wit
hsi
ll.O
rder
sep
arat
ely.
DS779
SPC
Rig
idV
inyl
Sill
Pro
tect
or
Co
ver
for
DS7
78Se
ries
ou
tsw
ing
sill.
No
tIn
clu
ded
wit
hsi
ll.O
rder
sep
arat
ely.
11/4
”(3
1.8m
m)
Ker
fin
sert
no
tin
clu
ded
wit
hsi
ll.
20M
IN.
20M
IN.
DS578V
Extr
ud
edA
lum
inu
mSi
ll/E
xtru
ded
Vin
ylTo
p(T
an)
Ove
rW
oo
dD
S578C
VC
lear
An
od
ized
No
Scal
e
DS778V
Extr
ud
edA
lum
inu
m/E
xtru
ded
Vin
ylTo
p(T
an)
Ove
rW
oo
dD
S778C
VC
lear
An
od
ized
No
Mai
nte
nan
ceV
inyl
Top
DS578O
AK
Extr
ud
edA
lum
inu
mSi
ll/O
akTo
pD
S578D
OA
KEx
tru
ded
Alu
min
um
Sill
/Bro
nze
An
od
ized
/Wo
od
Sub
-Sill
/Oak
Top
Thre
sho
ld
DS858O
AK
Extr
ud
edA
lum
inu
mSi
ll/
Oak
Top
.12'
-6”
len
gth
so
nly
DS858D
OA
KEx
tru
ded
Alu
min
um
Sill
/Bro
nze
An
od
ized
/Oak
Top
.12'
-6”
len
gth
so
nly
DS858C
OA
KEx
tru
ded
Alu
min
um
Sill
/Cle
arA
no
diz
ed/O
akTo
p12
’-6”
len
gh
tso
nly
53/ 3
2”(1
29.3
7mm
)
11/4
”(3
1.8m
m)
Ker
fin
sert
no
tin
clu
ded
wit
hsi
ll.
Als
oav
aila
ble
ou
tsw
ing
sill
fro
m85
/ 8”
to91
/2”
wid
e(2
19m
mto
241m
m)
DS795O
AK
WEx
tru
ded
Alu
min
um
Sill
/Wo
od
Sub
-Sill
/Oak
Top
(fro
m85
/8”
to91
/ 2”
wid
e)10
'(3.
04m
m)
len
gth
so
nly
.D
S795D
OA
KW
Extr
ud
edA
lum
inu
mSi
ll/B
ron
zeA
no
diz
ed/O
akTo
p(f
rom
85/8
”to
91/ 2
”w
ide)
10'(
3.04
mm
)le
ng
ths
on
ly.
Cu
sto
mo
rder
extr
aw
ide
ou
tsw
ing
sill
(fro
m95
/8”
to13
3 /8”
wid
e)24
4mm
to33
9mm
.Cal
lfo
rq
uo
te.
SIL
LPR
OTE
CTO
RC
OV
ER
77/ 8
”(2
00m
m)
DS778O
AK
Extr
ud
edA
lum
inu
mSi
ll/O
akTo
pD
S778D
OA
KEx
tru
ded
Alu
min
um
Sill
/Bro
nze
An
od
ized
/Wo
od
Sub
-Sill
/Oak
Top
Thre
sho
ld
413 /
32”
(111
.91m
m)
Ker
fin
sert
no
tin
clu
ded
wit
hsi
ll.
11/4
”(3
1.8m
m)
20M
IN.
DS5
78D
VB
ron
zeA
no
diz
edSi
ll/E
xtru
ded
Vin
ylTo
p(T
an)
DS578
VB
lack
Alu
min
um
Sill
/Vin
ylTo
p(B
lack
)D
S578
DV
Bla
ckB
ron
zeA
no
diz
edSi
ll/V
inyl
Top
(Bla
ck)
DS778D
VB
ron
zeA
no
diz
edSi
ll/E
xtru
ded
Vin
ylTo
p(T
an)
DS778V
Bla
ckA
lum
inu
mSi
ll/V
inyl
Top
(Bla
ck)
DS778D
VB
lack
Bro
nze
An
od
ized
Sill
/Vin
ylTo
p(B
lack
)
OU
TSW
ING
SILL
FOR
71/4
”JA
MB
WID
TH
No
Scal
e
-
® ®
6 A. K. DRAFT SEAL LTD.
Full Scale Except As Noted
INSWING SILLPre-Hung Door Applications
13/4” (44.5mm)
7/1(11.1
DS12BLE BlackDS12VE Rigid Vinyl Tan ReplacementTop for DS512V, DS612V, DS712V, DS812V9’ and 15.5’ Lengths Only. Not Drilled
13/4” (44.5mm)
5/16”(7 .9mm)
DS12OAK Solid Oak ReplacementThreshold for DS512, DS612, DS712,DS812 10’ (3m) Lengths Only – NotDrilled (15.5’ Also Available)
DS512GASKET for DS512DS612GASKET for DS612DS712GASKET for DS712DS812GASKET for DS812
Sill End Gaskets
Adhesive Backed
13/8”(34.9mm)
51/2” (139.7mm)
11/2”(38.1mm)
13/8”(34.9mm)
11/2”(38.1mm)
51/2” (139.7mm)
61/2” (165.1mm)
61/2” (165.1mm)
DS612V Extruded Aluminum Sill Over Wood Sub-Sill With Vinyl Top Threshold TanDS612CVBLACK Clear Anodized / Vinyl Top BlackDS612DVBLACK Bronze Anodized / Vinyl Top Black
DS612 Extruded Aluminum Sill Over Wood Sub-Sill With Oak Top Threshold(Oak Top Threshold 13/4” wide) 44.4 mm Shown
DS511SPC Rigid Vinyl Sill Protector Cover for DS512 Series Inswing Sill.Not Included with sill. Order separately.
13/4” (44.5mm)
5
(15.8
DS19VE High Vinyl Tan ReplacementTop Threshold for DS519HV,DS619HV, DS719HV and DS819HV.9’ (2.7m) or 15.5’ (4.7m) lengthsonly. Not drilled.
111/16”(42.8mm)
All Sills On Pages 6&7 Are Available With DS19VEHigh Vinyl top ThresholdDS519HV 51/2” Sill DS619HV 61/2” SillDS719HV 71/2” Sill DS819HV 81/2” Sill
DS512 Extruded Aluminum Sill Over Wood Sub-Sill With Oak Top ThresholdDS512COAK Clear Anodized Finish / Oak TopDS512DOAK Bronze Anodized Finish / Oak Top
DS612COAK Clear Anodized / Oak TopDS612DOAK Bronze Anodized / Oak Top
DS511SPC
20 MIN.
20 MIN.
20 MIN.
DS512V Extruded Aluminum Sill Over Wood Sub-Sill With Vinyl Top Threshold TanDS512CVBLACK Clear Anodized Finish / Vinyl Top BlackDS512DVBLACK Bronze Anodized Finish / Vinyl Top Black
Tanor Black
DS512L 15'-6” ONLYDS512CUTS LENGTHS UP TO 36 3/16” ONLY
20 MIN.
20 MIN.
DS512VBLACK Vinyl Top BlackDS512VL Vinyl Top Tan 15'-6” ONLYDS512DV Vinyl Top Tan LENGTHS UP TO 36 3/16” ONLY
DS612L 6 1/2 in X 15'-6 in ONLY
DS612VL 6 1/2 in X 15'-6 in ONLYDS612VBLACK 6 1/2 in X 9 FT ONLY
-
® ®
7A. K. DRAFT SEAL LTD.
Full Scale Except As Noted
INSWING SILL Pre-Hung Door Applications
71/ 2
”(1
90.5
mm
)
71/ 2
”(1
90.5
mm
)
81/ 2
”(2
15.7
mm
)
81/ 2
”(2
15.7
mm
)
20MIN.
20MIN.
20MIN.
DS812V
Extr
ud
edA
lum
inu
mSi
llO
ver
Wo
od
Sub
-Sill
Wit
hV
inyl
Top
Thre
sho
ldTa
nD
S812C
VC
lear
An
od
ized
Fin
ish
/Vin
ylTo
pB
lack
DS8
12D
VB
ron
zeA
no
diz
edFi
nis
h/V
inyl
Top
Bla
ck
DS711SPC
Rig
idV
inyl
Sill
Pro
tect
or
Co
ver
for
DS7
12Se
ries
insw
ing
sill.
No
tIn
clu
ded
wit
hsi
ll.O
rder
sep
arat
ely.
NO
TE:
DS7
12Si
lld
esig
ned
tosi
to
nfl
atsu
bfl
oo
ro
rsl
abo
nly
app
licat
ion
s
DS712 DS712V DS812 DS812V13 /
8”(3
4.9m
m)
11/ 2
”(3
8.1m
m)
13/ 8
”(3
4.9m
m)
11/2
”(3
8.1m
m)
Vinyl Sill Protector Cover for DS512 & DS712Refer to Page 6 & 7
DS712
Extr
ud
edA
lum
inu
mSi
llO
ver
Wo
od
Sub
-Sill
Wit
hO
akTo
pTh
resh
old
DS712C
OA
KC
lear
An
od
ized
Fin
ish
/Oak
Top
DS712D
OA
KB
ron
zeA
no
diz
edFi
nis
h/O
akTo
p
DS712V
Extr
ud
edA
lum
inu
mSi
llO
ver
Wo
od
Sub
-Sill
Wit
hV
inyl
Top
Thre
sho
ldTa
nD
S712C
VC
lear
An
od
ized
Fin
ish
/Vin
ylTo
pB
lack
DS712D
VB
ron
zeA
no
diz
edFi
nis
h/V
inyl
Top
Bla
ck
DS8
12
CO
AK
Cle
arA
no
diz
edFi
nis
h/O
akTo
pD
S812D
OA
KB
ron
zeA
no
diz
edFi
nis
h/O
akTo
pTh
resh
old
DS8
12
Extr
ud
edA
lum
inu
mSi
llO
ver
Wo
od
Sub
-Sill
Wit
hO
akTo
pTh
resh
old
(Oak
Top
Thre
sho
ld13
/ 4”
(44.
4m
m)
Wid
e)Sh
ow
n
No Scale
20MIN.
-
8 A. K. DRAFT SEAL LTD.
® ®
INSWING SILL Pre-HungDoor Applications (Extra Wide)
DS1114
OA
KEx
tru
ded
Alu
min
um
Sill
Ove
rW
oo
dSu
b-S
illW
ith
Oak
Top
Thre
sho
ldD
S1114D
OA
KB
ron
zeA
no
diz
ed
Solid
Oak
Thre
sho
ld
23/4
”(6
9.8m
m)
Solid
Oak
Thre
sho
ld
23/4
”(6
9.8 m
m)
Solid
Oak
Thre
sho
ld
23/4
”(6
9.8 m
m)
91/ 2
”(2
41.3
mm
) 111 /
4 ”(2
85.7
mm
)
DS131
4O
AK
Extr
ud
edA
lum
inu
mSi
llO
ver
Wo
od
Sub
-Sill
Wit
hO
akTo
pTh
resh
old
DS1314D
OA
KB
ron
zeA
no
diz
ed
131 /
4 ”(3
36.5
mm
)
Weld
Weld
This
Pro
file
Red
uce
dto
75%
of
Act
ual
Size
.
This
Pro
file
Red
uce
dto
75%
of
Act
ual
Size
.
This
Pro
file
Red
uce
dto
75%
of
Act
ual
Size
.
11/ 2
”(3
8.1m
m)
11/ 2
”(3
8.1m
m)
11/2
”(3
8.1m
m)
DS91
2Ex
tru
ded
Alu
min
um
Sill
Ove
rW
oo
dSu
b-S
illW
ith
Oak
Top
Thre
sho
ldD
S912
DEx
tru
ded
Alu
min
um
Sill
Bro
nze
An
od
ized
Ove
rW
oo
dSu
b-S
illW
ith
Oak
Top
Thre
sho
ld
DS2648 & DS2649 PVC ProtectiveTape Factory Applied To Any Sill.Durable & Long Lasting.Refer to price list for roll sizes.
20MIN.
20MIN.
20MIN.DS912H
TVH
igh
Vin
yl(T
an)
DS912D
HTV
Bro
nze
An
od
ized
DS1114H
TVH
igh
Vin
yl(T
an)
DS1114D
HTV
Bro
nze
An
od
ized
DS1314H
TVH
igh
Vin
yl(T
an)
DS1314D
HTV
Bro
nze
An
od
ized
NO
SCA
LE
NO
SCA
LE
NO
SCA
LE
5 /8”
(15.
8mm
)
23/ 4
”(6
9.8m
m)
DS2700
DS2700
-
9A. K. DRAFT SEAL LTD.
® ®
Full Scale Except As Noted
THR
ESH
OLD
S
DS500H DS600H DS700H DS800H
1 /2”
(12.
7mm
)
5”(1
27m
m)
DS500H
Extr
ud
edA
lum
inu
mH
eavy
Du
tyD
S500B
RA
SS
Solid
Bro
nze
(Bra
ss)
1 /2”
(12.
7mm
)
6”(1
52.4
mm
)
DS600H
Extr
ud
edA
lum
inu
mH
eavy
Du
ty
1 /2 ”
(12.
7mm
)
7”(1
77.8
mm
)
DS700H
Extr
ud
edA
lum
inu
mH
eavy
Du
ty
1 /2”
(12.
7 mm
)
8”(2
03.2
mm
)
DS800H
Extr
ud
edA
lum
inu
mH
eavy
Du
ty
#10
pla
ted
Ro
ber
tso
nfl
ath
ead
wo
od
scre
ws
and
pla
stic
anch
ors
of
app
rop
riat
ele
ng
thar
esu
pp
lied
wit
hal
lDS
thre
sho
lds.
All
thre
sho
lds
are
pu
nch
edan
dco
un
ters
un
ku
nle
sso
ther
wis
esp
ecif
ied
.Lea
dan
cho
rssu
pp
lied
wh
ensp
ecif
ied
(Ext
raC
har
ge)
.
Bro
nze
An
od
ized
Fin
ish
Ava
ilab
leO
nD
S500
H,D
S600
H,D
S700
H,D
S800
H
Cal
lFac
tory
For
Qu
ote
(cu
sto
mo
rder
on
ly)
DS2648
PVC
Pro
tect
ive
Tap
eFa
cto
ryA
pp
lied
ToA
ny
Sill.
Du
rab
le&
Lon
gLa
stin
g
1.31
4lb
s./f
t.
1.32
9lb
s./f
t. 1.63
8lb
s./f
t.
1.06
0lb
s./f
t.
Full
Scal
eEx
cep
tA
sN
ote
d
DS538V
Extr
ud
edA
lum
inu
mSi
llO
ver
Wo
od
Sub
-Sill
Wit
hV
inyl
Top
Thre
sho
ld(1
1/4”
31.7
mm
)
DS738
VEx
tru
ded
Alu
min
um
Sill
Ove
rW
oo
dSu
b-S
illW
ith
Vin
ylTo
pTh
resh
old
(11/
4”31
.7m
m)
53/8
”(1
36.5
mm
)
11/ 4
”(3
1.7m
m)
73/ 8
”(1
87.3
mm
)
11/4
”(3
1.7m
m)
INSW
ING
SILL
Pre-
Hun
gD
oor
App
licat
ions
DS38V
ER
epla
cem
ent
Vin
ylTo
p(T
anFo
rD
S538
VD
S738
V)
20MIN.
20MIN.
VIN
YL
TOP
FOR
DS912H
TV,D
S1114H
TV,D
S1314H
TV
DS912TV
EV
inyl
Top
On
ly(T
an)
23/4
”x
5 /8”
(69.
85m
mX
15.8
7mm
)To
Scal
e
-
10 A. K. DRAFT SEAL LTD.
Full Scale Except As Noted
3 /8”
(9.5
mm
)
1 /2”
(12.
7mm
)
5”(1
27m
m)
DS95
Extr
ud
edA
lum
inu
m
1 /2”
(12.
7mm
)
5”(1
27m
m)
DS500
Extr
ud
edA
lum
inu
mD
S500D
Extr
ud
edA
lum
inu
mB
ron
zeA
no
diz
ed
1 /2”
(12.
7mm
)
4”(1
01.6
mm
)
DS400
Extr
ud
edA
lum
inu
mD
S400D
Bro
nze
An
od
ized
21/ 2
”(6
3.5m
m)
DS250
Extr
ud
edA
lum
inu
m
1 /2 ”
(12.
7mm
)
5”(1
27m
m)
DS505
Extr
ud
edA
lum
inu
mSm
oo
thTo
p
1 /2”
(12.
7mm
)
6”(1
52.4
mm
)
DS600
Extr
ud
edA
lum
inu
mD
S600D
Bro
nze
An
od
ized
1 /2”
(12.
7mm
)
7”(1
77.8
mm
)
DS700
Extr
ud
edA
lum
inu
mD
S700D
Bro
nze
An
od
ized
1 /2”
(12.
7 mm
)
8”(2
03.2
mm
)
DS800
Extr
ud
edA
lum
inu
mD
S800D
Bro
nze
An
od
ized
DS176P
Extr
ud
edA
lum
inu
mw
/Fin
-Pile
(No
tLa
bel
ed).
*D
S176N
Extr
ud
edA
lum
inu
mw
/Syn
pre
ne
Inse
rt(L
abel
ed)
*D
S176D
NB
ron
zeA
no
diz
ed(L
abel
ed)
*D
S176D
PB
ron
zeA
no
diz
ed(N
ot
Lab
eled
)D
SN
17B
LSy
np
ren
eIn
sert
on
ly-
Bla
ck
Bu
mp
erst
rip
may
be
fast
ened
toan
yD
Sth
resh
old
toac
com
mo
dat
eve
rtic
alro
dp
anic
har
dw
are,
wh
ere
wid
ep
anic
exit
thre
sho
lds
are
req
uir
ed.
THRESHOLDS
DS95 DS500 DS505 DS600 DS700
DS800
DS118
Use
das
aTh
resh
old
Ap
plie
dSt
op
See
DS1
18Pa
ge
29.
DSN
03B
LSy
np
ren
eIn
sert
on
ly-
Bla
ck
Thre
sho
ldSto
pStr
ip
® ®
*
.518
lbs.
/ft.
.493
lbs.
/ft.
.606
lbs.
/ft.
.590
lbs.
/ft.
.747
lbs.
/ft.
.913
lbs.
/ft.
1.15
8lb
s./f
t.
-
4”(1
01.6
mm
)
11A. K. DRAFT SEAL LTD.
® ®
Full Scale Except As Noted
1 /4”
(6.4
mm
)
DS4
000
Extr
ud
edA
lum
inu
mD
S4000D
Bro
nze
An
od
ized
3 /16
”(4
.8m
m)
3 /16
”(4
.8m
m)
21/4
”(5
7.2m
m)
DS2
000
Extr
ud
edA
lum
inu
m
DS2000D
Bro
nze
An
od
ized
1 /4”
(6.4
mm
)
3”(7
6.2m
m)
1 /4 ”
(6.4
mm
)
4”(1
01.6
mm
)
5”(1
27m
m)
#10
pla
ted
Ro
ber
tso
nfl
ath
ead
wo
od
scre
ws
and
pla
stic
anch
ors
of
app
rop
riat
ele
ng
thar
esu
pp
lied
wit
hal
lDS
thre
sho
lds.
All
thre
sho
lds
are
pu
nch
edan
dco
un
ters
un
ku
nle
sso
ther
wis
esp
ecif
ied
.
DS176P
Extr
ud
edA
lum
inu
mw
/Fin
-Pile
(No
tLa
bel
ed).
*D
S176N
Extr
ud
edA
lum
inu
mw
/Syn
pre
ne
Inse
rt(L
abel
ed)
*D
S176D
NB
ron
zeA
no
diz
ed(L
abel
ed)
*D
S176D
PB
ron
zeA
no
diz
ed(N
ot
Lab
eled
)D
SN
17B
LSy
np
ren
eIn
sert
on
ly-
Bla
ck
Bu
mp
erst
rip
may
be
fast
ened
toan
yD
Sth
resh
old
toac
com
mo
dat
eve
rtic
alro
dp
anic
har
dw
are,
wh
ere
wid
ep
anic
exit
thre
sho
lds
are
req
uir
ed.
DS3000
Extr
ud
edA
lum
inu
mD
S3000D
Bro
nze
An
od
ized
1 /4”
(6.4
mm
)
6”(1
52.4
mm
)
1 /4”
(6.4
mm
)
7”(1
77.8
mm
)
1 /4 ”
(6.4
mm
)
8”(2
03.2
mm
)1 /
4”(6
.4m
m)
10”
(254
mm
)
DS5000
Extr
ud
edA
lum
inu
mD
S5000D
Bro
nze
An
od
ized
DS6000
Extr
ud
edA
lum
inu
mD
S6000D
Bro
nze
An
od
ized
DS7000
Extr
ud
edA
lum
inu
mD
S7000D
Bro
nze
An
od
ized
DS8000
Extr
ud
edA
lum
inu
mD
S8000D
Bro
nze
An
od
ized
DS10001
Extr
ud
edA
lum
inu
m(O
ne
Piec
e)D
S10001D
Bro
nze
An
od
ized
(On
ePi
ece)
DS4000L
Extr
ud
edA
lum
inu
mH
ole
sar
ep
un
ched
and
stag
ger
edw
hen
spec
ifie
d.
12‘l
eng
ths
on
lyo
nD
S400
0L.
(Jo
iner
Str
ipFo
rTr
ail
ers
)
THRESHOLDS(Low Rise)
1 /4 ”
(6.4
mm
)
5”(1
27m
m)
DS5000B
RA
SS
Solid
Bro
nze
(Bra
ss)
*
1 /4 ”
(6.4
mm
)5”
(127
mm
)
DS5005
Extr
ud
edA
lum
inu
m
.259
lbs.
/ft.
.447
lbs.
/ft.
.598
lbs.
/ft.
.712
lbs.
/ft.
.824
lbs.
/ft.
.970
lbs.
/ft.
1.10
47lb
s./f
t.
.345
lbs.
/ft.
.730
lbs.
/ft.
1.58
0lb
s./f
t.
DS5005D
Bro
nze
An
od
ized
-
DS222 Extruded Aluminum
BUMPER THRESHOLDS
1/2”(12.7mm)
DS333 Extruded Aluminum
® ®
12 A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
1/2”(12.7mm)
4” (101.6mm)DS444 Extruded Aluminum
1/2”(12.7mm)
4” (101.6mm)DS444S Extruded Aluminum Smooth Top
1/2”(12.7mm)
2” (50.8mm)
1/2”(12.7mm)
3” (76.2mm)
7/16”(11.1mm)
13/4” (44.4mm)DS236 Extruded AluminumDS236D Bronze Anodized
1/2”(12.7mm)
13/4” (44.5mm)
1/2”(12.7mm)
41/4” (108mm)
DS444V Extruded Aluminum w/Vinyl InsertDSV22GREY Vinyl Insert only, grey
1/2”(12.7mm)
31/4” (82.6mm)
DS333V Extruded Aluminumw/Vinyl Insert
DSV22GREY Vinyl Insert only, grey
1/2”(12.7mm)
21/4” (57.2mm)
DS222V ExtrudedAluminum w/Vinyl Insert
DSV22GREY Vinyl Insert only, grey
1/2”(12.7mm)
13/4” (44.5mm)DS122B BrownDS122W WhiteExtruded Dual Durometer Vinyl
7/16”(11.1mm)
31/2” (88.8mm)DS236-4 Extruded AluminumDS236-4D Bronze Anodized
THRESHOLDS (Half)
THRESHOLDS (Carpet)
13/8” (44.4mm)
DS121 Extruded Aluminum w/Vinyl Insert GreyDS121B Painted Brown w/Vinyl Insert BlackDS121W Painted White w/Vinyl Insert GreyDS121ABL Aluminum w/Vinyl Insert Black
FlexibleVinyl Rigid
P.V.C.
ReplacementInsert OnlyDSV21GREY
OrDSV21BL (Black)
ReplacementInsert OnlyDSV20GREY
OrDSV20BL (Black)
1/2”(12.7mm)
5” (127mm)DS510SS Stainless Steel
STAINLESS STEELStainless SteelScrews SuppliedNo Scale
DS120 Aluminum w/Insert GreyDS120D Bronze Anodized w/Insert BlackDS120ABL Aluminum w/Insert Black
-
13A.K. DRAFT SEAL LTD.
DS666H Extruded Aluminum Heavy Duty
® ®
Full Scale Except As Noted
1/4” (6.4mm)
3” (76.2mm)
1/4” (6.4mm)
4” (101.6mm)DS4444 Extruded Aluminum
DS4444D Bronze Anodized
1/4” (6.4mm)
5” (`127mm)DS5555 Extruded Aluminum
DS5555D Bronze Anodized
1/4” (6.4mm)
6” (`152.4mm)DS6666 Extruded Aluminum
DS6666D Bronze Anodized
1/4” (6.4mm)
7” (`177.8mm)DS7777 Extruded Aluminum
DS7777D Bronze Anodized
1/2” (12.7mm)
4” (101.6mm)DS444H Extruded Aluminum Heavy Duty
1/2” (12.7mm)
5” (127mm)DS555H Extruded Aluminum Heavy Duty
1/2” (12.7mm)
6” (152.4mm)
1/2” (12.7mm)
7” (177.8mm)DS777H Extruded Aluminum Heavy Duty
THRESHOLDS (Half)
#10 plated Robertson flat head wood screws and plasticanchors of appropriate length are supplied with all DSthresholds. All thresholds are punched and countersunkunless otherwise specified. Lead anchors supplied whenspecified. (Extra Charge)
DS3333 Extruded Aluminum
DS3333D Bronze Anodized
-
® ®
14 A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
7/8”(22.2mm)
41/4” (108mm)
THRESHOLDS(Latching Panic Exit Thermally Broken)
1/2”(12.7mm)
*DS177X5TB Extruded Aluminum w/Vinyl Break (Labeled)DS177X5TBP Extruded Aluminum w/Vinyl Break & Fin-Pile (Not Labeled)
*DS177X5TBN Extruded Aluminum w/Vinyl Break & Synprene Insert (Labeled)
7/8”(22.2mm)
51/4” (133.4mm)
1/2”(12.7mm)
*DS177X6TB Extruded Aluminum w/Vinyl Break (Labeled)DS177X6TBP Extruded Aluminum w/Vinyl Break & Fin-Pile (Not Labeled)
*DS177X6TBN Extruded Aluminum w/Vinyl Break & Synprene Insert (Labeled)
7/8”(22.2mm)
61/4” (158.8mm)
1/2”(12.7mm)
*DS277X7TB 73/8” (187.3mm)*DS277X7TBN 73/8” (187.3mm)*DS277X7TBP 73/8” (187.3mm)
*DS277X8TB 83/8” (212.7mm)*DS277X8TBN 83/8” (212.7mm)*DS277X8TBP 83/8” (212.7mm)
7/8”(22.2mm)
63/8” (161.9mm)
1/2”(12.7mm)
DS275TB Extruded Aluminum w/Thermal Breakand Rigid Insert
7/8”(22.2mm)
21/2” (63.5mm)1/2”
(12.7mm)
21/4” (57.2mm)
1/2”(12.7mm)
15/8” (41.3mm)
*DS177X4TB Extruded Aluminum w/Vinyl Break (Labeled)DS177X4TBP Extruded Aluminum w/Vinyl Break & Fin-Pile (Not Labeled)
*DS177X4TBN Extruded Aluminum w/Vinyl Break & Synprene Insert (Labeled)
1/2”(12.7mm)
WIDTHS AVAILABLE FROM 63/8” (161.9mm) TO 103/8” (263.5mm)
DS603TB (Shown Above) 63/8” (161.9mm) wide Extruded Aluminum w/2 Thermal Breaks DS804TB 83/8” (212.7mm) wide OffsetDS703TB 73/8” (187.3mm) wide Extruded Aluminum w/2 Thermal Breaks
DS903TB 93/8” (238.1mm) wideDS803TB 83/8” Centered (212.7mm) wide Extruded Aluminum w/2 Thermal BreaksDS1003TB 103/8” (263.5mm) wideNote: By adding multiples of DS202TB, wider thresholds may be achieved, consult factory.
Note: By adding DS275TB (Panic Stop), wider Panic Thresholds may be achieved, consult factory.
FIN-PILE INSERT (Not Labeled)(Specify P when ordering)
DS7530-270G Pile Insert Only
SYNPRENE INSERT (Labeled)(Specify N when ordering)DSN17BL Synprene Insert
Only - Black
*
*DS277X6TB (Shown Above) Labeled 63/8” (161.9mm)*DS277X6TBN Labeled 63/8” (161.9mm)*DS277X6TBP Not Labeled 63/8” (161.9mm)
DS201 Extruded Aluminum
DS276TBN Extruded Aluminum w/vinylBreak & Synprene Insert (Labeled)
7/8”(22.2mm)
4” (101.6mm)
1/2”(12.7mm)
Half Scale
*
*
*
DS202TB Extruded Aluminum w/Insert
DS201D Bronze Anodized
DS804DTB Bronze Anodized
-
DS401TB Extruded Aluminum w/Vinyl Break
® ®
15A. K. DRAFT SEAL LTD.
Full Scale Except As Noted
THRESHOLDS(Thermally Broken)
1/2”(12.7mm)
41/4” (108mm)
DS501TB Extruded Aluminum w/Vinyl Break
1/2”(12.7mm)
51/4” (133.4mm)
DS502TBFG Extruded Aluminum w/Thermal Break Frost Guard
1/2”(12.7mm)
51/4” (133.4mm)
DS601TB Extruded Aluminum w/Vinyl Break
1/2”(12.7mm)
61/4” (158.8mm)
DS602TB Extruded Aluminum w/Vinyl Break
1/2”(12.7mm)
61/4” (158.8mm)
DS701TB Extruded Aluminum w/Vinyl Break
1/2”(12.7mm)
71/4” (184.2mm)
DS801TB Extruded Aluminum w/Vinyl Break
1/2”(12.7mm)
81/4” (209.6mm)
#10 plated Robertson flat head woodscrews and plastic anchors ofappropriate length are supplied with allDS thresholds. All thresholds arepunched and countersunk unlessotherwise specified.
DS205TBI ExtrudedRigid PVC Vinyl Insert
THRESHOLDS (Retrofit)5/8”
(17mm)
31/2” (84mm)
DS218 Extruded AluminumSmooth Top w/Vinyl Feet
7/8”(22.2mm)
31/2” (84mm)DS350 Extruded Aluminum w/Vinyl Top and Feet.
THERMAL BARRIER (Frost Guard)
ReplacementInsert OnlyDSV50GREY
-
16 A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
*DS177 Extruded Aluminum(Labeled)DS177P Extruded Aluminumw/Fin-Pile (Not Labeled)
*DS177N Extruded Aluminumw/Synprene Insert (Labeled)
*DS177D Bronze Anodized (Labeled)*DS177DP Bronze Anodized w/Pile (Not Labeled)*DS177DN Bronze Anodized w/Synprene (Labeled)
® ®
THRESHOLDS (Ramp)
1/2”(12.7mm)
1/2”(12.7mm)
3/4”(19.1mm)
6” (152.4mm)DS606 Extruded Aluminum
6” (152.4mm)
12” (304.8mm)
DS605 Extruded Aluminum
No Scale
THRESHOLDS (Latching Panic Exit)
1/2”(12.7mm)
7/8”(22.2mm)
5” (127mm)
1/4”(6.4mm) 1/2”
(12.7mm)
15/8”(41.3mm)
1/4”(6.4mm)
5” (127mm)
1/2”(12.7mm)
13/16”(20.63mm)
5” (127mm)
*DS178 Extruded Aluminum (Labeled)*DS178N Extruded Aluminum w/Synprene Insert (Labeled)*DS178D Bronze Anodized (Labeled)*DS178DN Bronze Anodized w/Synprene (Labeled)DSN17BL Synprene Insert Only - Black
DS174A Extruded Aluminum (Labeled)DS174N Extruded Aluminum w/Sponge Neoprene Insert (Not Labeled)DSR38BL Neoprene Insert Only - Black
FIN-PILE INSERT (Not Labeled)(Specify P when ordering)
DS7530-270G Pile Insert Only
*SYNPRENE INSERT (Labeled)(Specify N when ordering)
DSN17BL Synprene Insert Only
*
1/2”(12.7mm)
33/4”” (95.25mm)
*DS171A Extruded Aluminum (Labeled)DS171AS Extruded Aluminum W/Silicone Insert
(Not Labeled)DSS71BL Silicone Insert Only - Black
21/2” (63.5mm)
*
*
*
*
.86 lbs. / ft.
.80 lbs. / ft.
.944 lbs. / ft.
.806 lbs. / ft.
.980 lbs. / ft.
.489 lbs. / ft.
DSP17GREYReplacement Pile Insert
Insert
Insert
Insert
-
® ®
17A.K. DRAFT SEAL LTD.Full Scale Except As Noted
THRESHOLDS (Oak)
DS223OAK
3/4”(19mm)
21/2” (63.5mm)
3/4”(19mm)
31/2” (88.9mm)
11/8”(28.6mm) 3/4”
(19mm)
21/2” (63.5mm)
DS221OAK
1/2”(12.7mm)
21/2” (63.5mm)
7/16”(11.11mm)
31/4” (82.6mm)
DS353OAKDS353OAKV w/Tan Colour Vinyl Top Insert
All Oak profiles shown on this page can be ripped for custom applications.
NoScale
TILE or CARPET
#10 Antique Bronze plated Robertson flat head wood screws and plasticanchors of appropriate length are supplied with all DS oak thresholds. Alloak thresholds are supplied not drilled unless drilling instructions arefurnished with order.
DS351OAK or DS351MAPLE
FLAT THRESHOLDS STAINLESS STEEL
STANDARD FRAME(NO SCALE)
DOUBLE EGRESS FRAME(NO SCALE)
Available in Stainless Steel 12 or 14 Gauge with a 304 Finish or Aluminum up to 1/8” (3.17mm) Thickness.Drawings Showing Sizes, End Notch Outs and Mounting Hole’s (If Needed) Are Required with Order.
These Thresholds are Custom Order Only. Please Call Factory for Quote.
DS2648 PVC Protective TapeFactory Applied To Any Sill.Durable & Long Lasting
ReplacementInsert OnlyDSV23TAN
Drilling Instructions Required For All Oak Thresholds
DS5006SS Stainless SteelDS5008A Aluminum
DS5007SS Stainless SteelDS5009A Aluminum
DS223OAKVDSV23TAN Vinyl Insert Only - Tan Colour
-
DS900 (2 Piece) Extruded AluminumDS900W (Welded)
DS9000 (2 Piece) Extruded Aluminum
Not Welded (2 Piece)
® ®
18 A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
® ®
19
Full Scale Except As Noted
THRESHOLDS (Extra Wide)Some profiles shown on pages 18 & 19 are 2 piece thresholds or2 pieces welded together, i.e.:DS900 (2 piece)
DS900W (2 pieces welded together)3 piece thresholds available 15” to 20” wide
#10 plated Robertson flat head wood screws andplastic anchors of appropriate length are suppliedwith all DS thresholds. Lead anchors (Extra Charge)supplied when specified. All extra wide thresholdsare supplied not drilled unless drilling instructionsare furnished with order.
9” (228.6mm)
DS11000 (2 Piece) Extruded Aluminum11” (279.4mm)
DS12000 (2 Piece) Extruded Aluminum12” (304.8mm)
DS13000 (2 Piece) Extruded Aluminum13” (330.2mm)
DS14000 (2 Piece) Extruded Aluminum
1/4” (6.4mm)
1/4” (6.4mm)
1/4” (6.4mm)
1/4” (6.4mm)
1/4” (6.4mm)
14” (355.6mm)
1/2” (12.7mm)
9” (228.6mm)
DS1000 (2 Piece) Extruded AluminumDS1000W (Welded)
1/2” (12.7mm)
10” (254mm)
DS1100 (2 Piece) Extruded AluminumDS1100W (Welded)
1/2” (12.7mm)
11” (279.4mm)
DS1200 (2 Piece) Extruded AluminumDS1200W (Welded)
1/2” (12.7mm)
12” (304.8mm)
DS1300 (2 Piece) Extruded AluminumDS1300W (Welded)
1/2” (12.7mm)
13” (330.2mm)
DS1400 (2 Piece) Extruded AluminumDS1400W (Welded)
1/2” (12.7mm)
14” 355.6mm)
DS176P Extruded Aluminumw/Fin-Pile (Not Labeled)
*DS176N Extruded Aluminumw/Synprene Insert (Labeled)
*DS176DN Bronze Anodized (Labeled)DS176DP Bronze Anodized(Not Labeled)DSN17BL Synprene Insert Only - Black
Bumper strip may be fastened toany DS threshold to accommodatevertical rod panic hardware, wherewide panic exit thresholds arerequired.
*
The Instant Self Adhesive Anti-Slip Safety Surface!
DSFLEXTRED1 1” (25.4 mm) BlackDSFLEXTRED2 2” (50.8 mm) BlackAbove Any Roll Length Up To 60 ft. (18.28 m)DSTRED1-60 1” 60 ft. Roll Only (18.28 m)DSTRED2-60 2” 60 ft. Roll Only (18.28 m)
A.K. DRAFT SEAL LTD.
1/4” (6.4mm)
10” (254mm)DS10001 (One Piece) Extruded Aluminum DS10001D (One Piece) Bronze Anodized
DS2648 PVC Protective TapeFactory Applied To Any Sill.Durable & Long Lasting12" (304mm) wide rollsavailable for purchase.
-
® ®
20 A.K. DRAFT SEAL LTD. Weatherstripping Specialists Since 1960
Full Scale Except As Noted
ASTRAGALS
INSWINGDS346N SERIES(NON THERMALLY BROKEN)
1 3/4”(44.5mm)
DS348N SERIES(THERMALLY BROKEN)
1 3/4”(44.5mm)
13/16”(20.6mm)
Gap betweendoors
Bright Dip GoldDS346G79NDS346G80NDS346G84NDS346G96NWhite PaintedDS346W79NDS346W80NDS346W84NDS346W96NBronze AnodizedDS346D79NDS346D80NDS346D84NDS346D96NClear AnodizedDS346C79NDS346C80NDS346C84NDS346C96N
Bright Dip GoldDS345G79NDS345G80NDS345G84NDS345G96NWhite PaintedDS345W79NDS345W80NDS345W84NDS345W96NBronze AnodizedDS345D79NDS345D80NDS345D84NDS345D96NClear AnodizedDS345C79NDS345C80NDS345C84NDS345C96N
• KERF WEATHERSTRIPNOT INCLUDED
• STANDARD FINISHESBright Dip Gold
WhiteClear Anodized
Bronze Anodized
• SIZES79”, 80”, 84”, 96”
Custom Sizes Available
Neoprene Bottom SealDS346LBOOT Boot OnlyDS346RBOOT Boot Only
For Inswing Astragals Only
DS346KITBR -Brass Hardware KitDS346KITCH -Chrome Hardware Kit
Each extruded aluminum astragal comes complete with top and bottom bolts with 2 strikes, hardware pack, pile inner seal, moulded rubberbottom seal, standard punch outs for deadbolt, snap in covers, dead bolt and latch strikes attached.*Kerf weatherstrip not included with astragal*Each exterior T-Bar astragal comes complete with weatherstrip and standard punch out for latch and deadbolt.
OUTSWINGLOCKING
ASTRAGAL(2 PIECE)
DS345N SERIES(NON THERMALLY BROKEN)
1 3/4”(44.5mm)
2 1/8”44.5mm)
DS347N SERIES(THERMALLY BROKEN)
1 3/4”(44.5mm)
3/8”(9.53mm)
• KERFWEATHERSTRIPNOT INCLUDED• SOLD AS 2 PC.
SETS ONLY• TRIPLEW/STRIPSYSTEM
1. KERF W/STRIP2. PILE
3. GASKET
• SIZES79”, 80”,84”, 96”
Custom SizesAvailable
INTERIOR
ACTIVEDOOR
OUTSWING
THERMALLYBROKEN
INACTIVEDOOR
Exterior
T-Bar Astragal With PVC. Foam Weatherstrip TapeAnd Punchouts For Latch & Deadbolt
T-Bar Astragal With PVC. Foam Weatherstrip TapeAnd Punchouts For Latch & Deadbolt
Bright Dip GoldDS348GTB79NDS348GTB80NDS348GTB84NDS348GTB96NWhite PaintedDS348WTB79NDS348WTB80NDS348WTB84NDS348WTB96NBronze AnodizedDS348DTB79NDS348DTB80NDS348DTB84NDS348DTB96NClear AnodizedDS348CTB79NDS348CTB80NDS348CTB84NDS348CTB96N
Bright Dip GoldDS347GTB79NDS347GTB80NDS347GTB84NDS347GTB96NWhite PaintedDS347WTB79NDS347WTB80NDS347WTB84NDS347WTB96NBronze AnodizedDS347DTB79NDS347DTB80NDS347DTB84NDS347DTB96NClear AnodizedDS347CTB79NDS347CTB80NDS347CTB84NDS347CTB96N
DS348HSS Optional Astragal SealHorseshoe top and bottom to seal where astragalmeets sill and head. Mounts to sill and top jamb.
23/8”(60mm)
1/4”(6.4mm)+1/16” - 0
3/8”(9.5mm)
3/8”(9.5mm)
MountingHoles
NoScale
-
® ®
21A. K. DRAFT SEAL LTD.
Full Scale Except As Noted
ASTRAGALS (Wood)
DS191P Primed, Machined for Flush Bolts, up to 84” (2134mm)DS192C Fir Clear, Machined for Flush Bolts, up to 84” (2134mm)DS190C96 Fir Clear, Machined or Not up to 96” (2438mm)DS190C120 Fir Clear, Not Machined 120” (3048mm)
DS195 13/8” Clear Fir,Not Machined, 84” (2134mm)DS196P 13/8” Primed Fir,Machined for Flush Bolts, 80”(2032mm)DS197C 13/8” Clear Fir,Machined for Flush Bolts, 80”(2032mm)
MORTISEFLUSHBOLTSDS19B6 Solid Brass 6”(152.4mm) w/1” throw &Round EndDS19C6 Satin Chrome 6”(152.4mm) w/1” throw &Round End
DS19 SeriesFlush BoltDS190 SeriesWood Astragal
DS421 seriesFoam-TightKerf w/Strip
No Scale
13/8”(34.9mm)
13/8”(34.9mm)
11/2”(38.1mm)
13/8”(34.9mm)
21/8” (54mm)
13/4” (44.4mm)
Foam-Tight Kerfnot includedwith Astragal
MAY BE CUT TO ANY LENGTH ANDMACHINED FOR DS19 SERIES FLUSH BOLTS
For 13/4” Doors (44.4mm)
13/16”(20.6mm)
ASTRAGALS (Metal)2” (50.8mm)
11/2”(38.1mm)
NotDrilled
ForMounting
*DS180CN Extruded Aluminum Clear AnodizedDS180CP Extruded Aluminum Clear Anodized
*DS180DN Extruded Aluminum Bronze AnodizedDS180DP Extruded Aluminum Bronze Anodized
*DS7520-270G Pile Insert Only - Grey*DSN17BL Synprene Insert Only - Black
Pile Insert not rated
Synprene Insert ratedSpecify “P” forFin-Pile Insert or “N”for Synprene Insert
2” (50.8mm)
1/4”(6.4mm)
1/8”(3.2mm)
*DS185CN Extruded Aluminum Clear AnodizedDS185CP Extruded Aluminum Clear Anodized
*DS185DN Extruded Aluminum Bronze AnodizedDS185DP Extruded Aluminum Bronze Anodized
*DS7520-270G Pile Insert Only - Grey*DSN17BL Synprene Insert Only - Black
Not Drilled For MountingPile Insert not rated
Not PunchedFor Mounting
DS181BG Bright Dip GoldDS181C Clear AnodizedDS181D Bronze AnodizedDS181W Painted White
111/16” (42.85mm)
115/16”(49.21mm)
1/4”(6.4mm)
If Required Specify CutOut For Latch AndDeadbolt And NetLength Of Astragal
Refer ToPage 20
For DS181Application
3/8”(9.53mm)
MORTISEFLUSH BOLTSDS19B6 Solid Brass 6”(152.4mm) w/1” throw &Round End
DS19C6 Satin Chrome 6”(152.4mm) w/1” throw &Round End
DS19AN Antique Nickel
No Scale
DS9BSTRIKE Strike PlateBrass for DS19B6
DS9CSTRIKE Strike PlateChrome for DS19C6
NoScale
* *
-
25/64”(9.9mm)
® ®
22 A. K. DRAFT SEAL LTD.
Full Scale Except As Noted
WEATHERSTRIPPING (KERF-INSERTED)
DS434B36 Brown 38” (965mm)DS434B81 Brown 82” (2082mm)DS434B96 Brown 97” (2463mm)DS434B (Coils)
DS434W36 White 38” (965mm)DS434W81 White 82” (2082mm)DS434W96 White 97” (2463mm)DS434W (Coils)
Q-FOAM DS434
KERF INSERTED MAGNETIC WEATHER-STRIP FOR METAL CLAD ENTRY DOORS
DS264KFDD36Beige 36” Header (914mm)DS265KFDD81Beige 81” Latchside (2057mm)
Extruded (TPE), with magneticstrip and flexible bellows design,allows the seal to reach out andmake positive contact with themetal-clad door surface.
Designed for Standard 1/8” x 3/8”(3.2mm x 9.5mm) kerfs, and 21/8”jamb (53.9mm).
Compression SealDS252KFSD81Beige 81” Latchside, Hingeside orHeader (2057mm)
Extruded (TPE), Double Bulb wrapsaround the edges of the door togive a double seal.• Water Repellant• Excellent Compression Set, U/V,
and Temperature Resistant• Designed for 1/8” x 3/8”
(3.2mm x 9.5mm) kerfs,and 21/8” jamb (53.9mm).
MagneticSeal
NoScale
DS430 EXTENDED REACH KERF-INSERTED“FOAMWRAP” WEATHERSTRIP
(Recomended For Header And Latch Side Only)
• Increased Tear ResistantJacketing
• UV Resistant Jacketing• Moisture Resistant Foam• Low Closing Force• Minimal CompressionSet
For metalclad doors
1”(25.4mm)
DS430W36 White 36” (914mm)DS430W81 White 81” (2057mm)DS430W96 White 96” (2438mm)DS430B36 Brown 36” (914mm)DS430B81 Brown 81” (2057mm)DS430B96 Brown 96” (2438mm)
Foam Wrap Magnetic KerfInserted WeathersealUse DS418 on latch and headerUse DS434 on hinge side
DS418W36 White 36” (914mm)DS418W81 White 81” (2057mm)DS418B36 Brown 36” (914mm)DS418B81 Brown 81” (2057mm)
• Virtually Self Guiding• Easy Pull-Out &
Reinstallation• “Ramp-up” Foot Design• Easy Hand Installation
Note: Use DS434 For Hinge Side Refer to Page 22
13/16”(20.63mm)
1”(25.4mm)
FIRE RATING
Category H Edge Sealing System and Category JGasketing for use with Category B wood doorsrated 20 minutes fire tested without hosestream and Cateory B wood and plastic-coveredcomposite doors rated up to 90 minutes.
WATER INFILTRATION
Passed water penetration tests at 25 mph(40 km/h) and 34 mph (55 km/h) ASTM E-331standard test method.
9/64”(3.6mm)
43/64”(17mm) No
Scale
CLASSIFIED
UP TO 90 MINUTES
NO SCALE
.580”(14.7mm)
.650”(16.5mm)
Reach
.500”(12.7mm)
.155”(3.9mm)
3/8”(9.52mm)
“The Locator” Corner Pad…Features:• High performance closed-cell foam for long term durability. No“wicking” of water like other products.• High performance polyethylene surface to provide easy door closure.
DS439B Brown DS439W White
NOSCALE
-
® ®
22-a A. K . DRAFT SEAL LTD.
Full Scale Except As Noted
Astragals For Double Door Multipoint Application
V.G. Fir Astragal DS198 SeriesUsed in Conjunction With the Paddock Multi-Point Lock
DS198VGFIR96 Astragal V.G. Fir 96” (2438mm)DS198VGFIR120 Astragal V.G. Fir 120” (3048mm)
2”(50.8mm)
3-1/8”(79.4mm)
2-3/16”(55.58mm)
1-9/64”(28.97mm)
1-13/16”(46mm)
Active Panel Inactive Panel
Description Description
1-3/4”(44.45mm)
EXTERIOR
INTERIOR
16.2mm(0.6”)
16.2mm(0.6”)
12mm(0.5”)
Eurogroove ForPaddock Multi-point Eurogroove For
Paddock Shootbolt
Center Hook
Top andBottom Hook
-
® ®
23A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
WEATHERSTRIPPINGKERF-INSERTED
DS421 Kerf “FOAM-TIGHT” for Metal orWood Entry Doors
• SEAMLESS, ELASTOMERIC SKIN provides easy breakaway, long-life integrity, andeliminates water penetration.
• Available in 5/8” (15.875mm) reach for 3/8” weatherstrip gap. (9.5mm)• Dual-locking flexible barbs insert easily, hold securely without slipping, and can
be removed and reinserted without damage.• Closed cell foam profile resists water absorption, eliminates wicking and has no
air pockets.• Operating forces remain constant over a wide compression range helping doors
exceed all industry requirements.• Independent tests have shown FOAM-TIGHT performs like new under all
temperature conditions.• Standard cut lengths are 81” and 36” (2057mm & 914mm). Custom cut lengths are
available, 85”, 97” all sizes in stock. (2159, 2463)• Designed for standard 1/8” x 3/8” kerfs, and 21/8” jamb (3.2mm x 9.5mm x 53.9mm)• Choice of colours: brown, black, white. (Some Sizes & Colours may Not be
Stocked).DS421B16.5 Packaged 1/36” x 2/81” Brown Set (914mm x 2057mm)DS421B17 Packaged 1/36” x 2/84” Brown Set (914mm x 2159mm)DS421B20 Packaged 1/81” x 2/84”Brown Set For Double Doors (2134mm)DS421W16.5 Packaged 1/36” x 2/81” White Set (914mm x 2057mm)DS421W17 Packaged 1/36” x 2/84” White Set (914mm x 2159mm)DS421W20 Packaged 1/81” x 2/84” White Set For Double Doors (2134mm)
DS421W White (500 ft Coil) or LengthsDS421B Brown (500 ft Coil) or LengthsDS421BL Black (500 ft Coil) or LengthsDS421B36 Brown 36” (914mm)DS421B81 Brown 81” (2057mm)DS421B84 Brown 85” (2159mm)DS421B96 Brown 97” (2463mm)DS421W36 White 36” (914mm)DS421W81 White 81” (2057mm)DS421W84 White 85” (2159mm)DS421W96 White 97” (2463mm)DS421BL36 Black 36” (914mm)DS421BL84 Black 85” (2159mm)DS421BL96 Black 97” (2463mm)
Kerf FOAM-TIGHTfor Casement Windows
DS425W WhiteDS425B Brown
DS435B BrownDS435W WhiteFootage or1500’ (457.2m) Coil
Kerf INSERTED FIN-PILEDSP108-20 3/16” (4.8mm) Pile Height - GreyDSP108-35 5/16” (7.9mm) Pile Height - Grey
Kerf INSERTED VINYL FLEX
DSP108
Measurements Shownin Decimals For Accuracy
DSPF109Extruded Vinyl/Tan12 ft Length OnlyDSPF109W White
.320”(8.1mm)
.562”(14.27mm)
.125” x .375 Kerf Slot(3.18mm) x (9.52mm)
.359”(9.1mm)
.406”(10.3mm)
.344”(8.7mm)
.230”(5.84mm)
.105”(2.66mm)
.300”(7.62mm)
.078”(1.98mm)
Size to Scale
Footage or1500’ (457.2m) Coil
Size to Scale
No ScaleKerfSlotSize
.320”(8.1mm)
.285”(7.23mm)
3/16” (4.8mm) or 5/16”(7.9mm) Pile Height
.110”(2.79mm)
.400”(10.16mm)
.203”(5.2mm)
.285”(7.23mm)
.145”(3.68mm)
BASE =.200”
(5.08mm) .145” (3.68mm)
KerfSlotSize
No Scale
No Scale
No Scale
.380”(9.65mm) .250”
(6.35mm)JAMB
SASH EDGE
STOP
SA
SH
FAC
E
MINIMUM SPACEBETWEEN THE SASHFACE AND THE STOP IS3/16” (4.76mm)MAXIMUM SPACE IS5/16” (7.93mm)
Kerf used in DSOutswing Sill Series.Refer to pages 4,5
EPDM Foam-filled Bulb Seal
NoScale
To Scale1/4”
(6.35mm)15/64” (6mm)
7/64”(2.8mm)
5/16”(7.93mm)
5/64” (1.98mm)
RequiredKerf SlotSize
Kerf FOAM-TIGHT for WindowsTested for air and water infiltration to CSA A440.
DS426B BrownDS426W WhiteDS426BL BlackFootage or 1000’(304m) Coil
KERF SLOTFOR DS416 KERFINSERTED SEALBROWN, WHITEOR BLACKFootage or 820’(250m) Coil
9/32" (7.14mm)
DS416B BrownDS416W WhiteDS416BL Black
5/16(7.94mm)
DSP108-35BL 5/16” (7.9mm) Pile Height - BlackDSP108-50BL 1/2” (7.9mm) Pile Height - Black
DS425BEIGE Beige
-
® ®
24 A.K. DRAFT SEAL LTD.
DOOR SHOES (ALUMINUM)
DS210 Extruded Aluminum w/Synprene InsertDS210D Bronze Anodized FinishDSN16BL Synprene Insert Only - Black
DS211AV Extruded Aluminum w/Synprene InsertDS211DV Bronze Anodized FinishDSN16BL Synprene Insert Only - Black
DS216 Extruded Aluminum w/Synprene InsertDS216D Bronze Anodized FinishDSN16BL Synprene Insert Only - Black
DS212 Extruded Aluminum w/Synprene InsertDS212D Bronze Anodized FinishDSN16BL Synprene Insert Only - Black
DS217 Extruded Aluminum w/Synprene InsertDS217D Bronze Anodized FinishDSN16BL Synprene Insert Only - Black
DS234 Extruded Aluminum w/Synprene InsertDSN16BL Synprene Insert Only - Black
11/4” (31.8mm)
13/4” (44.4mm)
13/4” (44.5mm)
15/32” (29.3mm)
13/4” (44.4mm)
13/16” (30.2mm)
11/8”(39.7mm)
5/8”(15.8mm)
1/2”(12.7mm)
1/2”(12.7mm)
11”(25.4mm)
1/2” (12.7mm)
11/4”(31.8mm)
31/8”(79.4mm)
1/2”(12.7mm)
1/2”(12.7mm)
1/2”(12.7mm)
Full Scale Except As Noted
11/4”(31.8mm)
11/8”(28.6mm)
-
DS228 Doorshoe PVC.White or Brown.For DS459, DS659.Series Inswing Sill.Refer to price list foravailable sizes.
Weep Hole
DS127 Extruded Vinyl Brown or WhiteDS127B36 DS127W32DS127B48 DS127W36
DS127W48
® ®
25A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
13/4” (44.4mm)
DOOR SHOES (PVC)
DS128 Extruded Vinyl Brown or WhiteDS128W30 DS128W34DS128W31.75 DS128W35.75DS128W32 DS128W36DS128W33.75 DS128W38
DS128W48
13/4” (44.4mm)
15/8”(41.3mm)
DS124 Extruded Vinyl Brown or White withFin-Pile Inserts DS124W32
DS124B32 DS124W34DS124B36 DS124W36DS124B38 DS124W38DS124B48 DS124W48
DS124W31.75DS124W35.75
13/4” (44.4mm)
15/8”(41.3mm)
13/4” (44.4mm)
13/8”(34.9mm)
DS129 Extruded VinylBrown or White
DS129B36 BROWN 36”DS129W36 WHITE 36”
13/8” (34.9mm)
17/8”(47.6mm)
Seal Flange
Seal Flange
Seal Flange
DS229W31.78 White 31 7/8” (809.62mm)DS229W35.78 White 35 7/8” (911.22mm)
13/4” (44.4mm)
Rain Drip Notched Each EndFor Door Stop
For Inswing Sill Only
For Millennium SeriesInswing Doorsill
For Millennium SeriesOutswing Doorsill
13/4” (44.4mm)
DS2702W32DS2702W36DS2702W48
DS2700W32DS2700W36DS2700W48DS2700B36DS2700B48
13/4” (44.4mm)
Extruded Dual P.V.C. WhiteFin-Pile Insert, Flexible Fins and Bulb Seal Fin-Pile Inserts
Extruded Dual P.V.C. WhiteFin-Pile Insert, 2-Bulb Inserts
SantopreneBulb SealDSN27BL
DOORDOOR
DS128B32DS128B36DS128B38DS128B48
Sloped For 7° Door Sill
(NOTE: 38” (965.2mm) Door Shoe Is Used On Inactive Door With Astragal On Sets Of Double Doors)
DS2600W32DS2600W36DS2600W48
Concealed Sweep (Kerf SLot Inserted)DS225 Extruded Dual Durometer PVC
DS225B35.75 DS225W35.75DS225B36 DS225W36DS225B48 DS225W48DS225B109 DS225W109
Cetain Doorshoes,This Page, NotchedAt Each End
UBC 7-2 (1997)
UBC 7-2 (1997)
UBC 7-2 (1997)
UBC 7-2 (1997)
DS125 Extruded Vinyl Brownor White with Fin-Pile InsertsDS125W32 DS125B36DS125W36 DS125B48DS125W48
13/4” (44.4mm)
1.690
0.870
0.370
111/16” (42.8mm)
7/8” (22.2mm)
3/8”(9.5mm)
DSP12GREY Replacement Insert
DSP12GREY Replacement Insert
DS2600B32DS2600B36
DS2700B36DS2700B48
DS2702B36DS2702B48
-
® ®
26 A. K. DRAFT SEAL LTD.
AUTOMATIC DOOR BOTTOMS*LOW CLOSING FORCE
*DS335CR Clear Anodized*DS335DR Bronze Anodized
DS344AS
DS336ARAvailable from 24” (609.6mm) - 48” (1219mm) in length.
The EZ-Touch door bottom requiresonly 3 to 5 pounds of pressure toactivate the drop bar mechanism.
Light gauge materials have allowed usto perfect a door bottom suited forthose applications when the pressure toclose the door is critical. We’ve includedthe same proven technology used in allof our other automatic door bottoms.
Accessibility requirements remind us ofthe necessity for everyone to be able tooperate doors with ease. Our EZ-Touchdoor bottom meets that need and stillprovides an effective seal for anyapplication.
Our door bottom requires 1 5/8”(41.3mm) x3/4” (19.1mm) mortise and may be field cut(up to 4”[101.6mm]) in length to fit doorand is reversible. This unit has an adjustingscrew to regulate amount of drop to 1/2”(12.7mm). A “furring strip” may be used tolower this automatic door bottom when adeeper channel is used.
Door Bottoms available from 24” (609.6mm)- 48” (1219mm) in length. Fire ratings applyto metal doors only.
"2(50.8m m)
5/8"(15.9mm)
3/4" (19.1mm)Max. Drop
DS342ARAvailable from 24” (609.6mm) -48” (1219mm) in length (stock).49” (1244.6mm) - 60” (1524mm)in length (factory order)
DS343CR Clear AnodizedAvailable from 12” (304.8mm) -60” (1524mm) in length.24” (609.6mm) - 48” (1219mm)in length (stock).Other sizes (factory order).
Note: Do not use surface mount automatic door bottoms with continuous swing clear hinge.
Surface Hollow Metal Doors
Applicable to all door bottoms except for DS344ASAvailable from 24” (609.6mm) - 48” (1219mm) in length.24” (609.6mm) to 32” (812.8mm) may be cut down by 2” (50.8mm).33” (558.8mm) to 48” (1219mm) may be cut down by 4” (101.6mm).
10COK for use on ‘S’ labeled doors. 10COK for use on ‘S’ labeled doors.#4 x 5/8” (15.9mm) SMS furnished.
10C
OK for use on ‘S’ labeled doors.#4 x 5/8” (15.9mm) SMS furnished.
10C
OK for use on ‘S’ labeled doors.
10C
OK for use on ‘S’ labeled doors.
Surface
NeopreneInsert
NeopreneInsert
NeopreneInsert
NeopreneInsert
NeopreneInsert
-
3/16” (4.8mm)
® ®
27A. K. DRAFT SEAL LTD.
Full Scale Except As Noted
DOOR BOTTOM SWEEPS
DS110 Extruded Aluminumw/Pile
DS110D Extruded AluminumBronze Anodized w/Pile
DSP10GREY Pile Insert Only
1/4” (6.4mm)
7/8”(22.2mm)
DS135C Extruded AluminumClear Anodized w/ 1/4” x 13/8” SBR RubberDS135D Extruded AluminumBronze Anodized w/ 1/4” x 1
3/8”(9.5mm)
1”(25.4mm)
DS156AluminumDS156DBronze AnodizedDS156WPainted WhiteDSV56GREYVinyl Insert OnlyForDS156DS156DDS156W
1/4” (6.4mm)
21/4”(57.2mm)
DS138C-2 ExtrudedAluminum Clear Anodizedw/ 1/8” x 2” RubberDS138D-2 ExtrudedAluminum Bronze Anodizedw/ 1/8” x 2” Rubber
23/8”(60.3mm)
1/8”(3.2mm)
11/4”(31.7mm)
DS138C Extruded Aluminum ClearAnodized w/ 1/8” x 1 3/8” RubberDS138D Extruded AluminumBronze Anodized w/ 1/8” x 1 3/8”Rubber
3/16” (4.8mm
)
1/8”(3.2mm)
11/4”(31.7mm)
111/16”(42.5mm)
DS140ExtrudedAluminum w/1”long vinyl insertDS140DExtrudedAluminumBronze AnodizedDS140WExtrudedAluminumPainted WhiteDSV40BLVinyl InsertOnly ForDS140DS140DDS140W
1/4” (6.4mm)
13/4”(44.4mm)
DS136C-2 Extruded AluminumClear Anodized w/ 1/8” x 2”RubberDS136D-2 Extruded AluminumBronze Anodized w/ 1/8” x 2”Rubber
1/4” (6.4mm)
21/2”(63.5mm)
1/8”(3.2mm)
1”(25.4mm)
DS136C Extruded AluminumClear Anodized w/ 1/8” x 1 3/8”RubberDS136D Extruded AluminumBronze Anodized w/ 1/8” x 1 3/8”Rubber
1/4” (6.4mm)
1/8”(3.2mm)
1”(25.4mm)
17/8”(47.6mm)
2”(50.8mm)
13/8”(34.92mm)
Note: Sweeps With Rain Drip Refer To Page 30
UBC 7-2(1997)
UBC 7-2(1997)
UBC 7-2(1997)
13/8”(34.9mm)
1”(25.4mm)
1/4” (6.4mm)
DS238SS StainlessSteel w/RubberUBC 7-2 (1997)
UBC 7-2(1997)
*DS533CR Clear Anodized*DS533DR Bronze AnodizedDS533INSERT (Insert Only) fits both 533 & 633
DS633ARAvailable from 24” (609.6mm)
to 48” (1219mm) in length.
"2(50.8 mm)
5/8 "(15.9mm)
3/4" (19.05mm)Max. Drop
Surface
AdjustingScrew
SynpreneInsert
SynpreneInsert
DS AUTOMATIC DOOR BOTTOMS
UBC 7-2(1997)UBC 7-2
(1997)
SBR3/8” RubberDSR35BL Replacemnet NeopreneSponge Insert - Black
Insert
DSR38BL2 ReplacementNeoprene Sponge Insert - Black
DSR38BL ReplacementNeoprene Sponge Insert - Black
Insert
Insert
-
SILICONE DOOR GASKET SEAL Self-Adhesive
® ®
28 A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
DOOR WEATHERSTRIPPING
DS130C Extruded Aluminum ClearAnodized w/ 1/4” x 1/2” Sponge NeopreneDS130D Extruded Aluminum BronzeAnodized w/ 1/4” x 1/2” Sponge Neoprene
1”(25.4mm)
1/4” (6.4mm)
DS139C Extruded AluminumClear Anodized w/ 3/16” x 1 1/4” SpongeNeopreneDS139D Extruded AluminumBronze Anodized w/ 3/16” x 1 1/4” SpongeNeoprene
11/2”(38.1mm)
3/16” (4.8mm)
DS134C Extruded Aluminum ClearAnodized w/ 3/16” x 5/8” Sponge NeopreneDS134D Extruded Aluminum BronzeAnodized w/ 3/16” x 5/8” Sponge Neoprene
This New Design isfor thoseapplications wherethe pressure to closethe door is critical.
DSS11 is AvaliableSame Size Coils andColours as DSS66.
13/16” (30.2mm)
3/16” (4.8mm)
DS132C Extruded AluminumClear Anodized w/ 1/4” x1 1/8” SpongeNeopreneDS132D Extruded AluminumBronze Anodized w/ 1/4” x1 1/8” SpongeNeoprene
13/8” (34.9mm)
1” (25.4mm)
3/8”(9.5mm)
DS131C Extruded AluminumClear Anodized w/ 3/8” x 1 1/4” SpongeNeopreneDS131D Extruded AluminumBronze Anodized w/ 3/8” x 1 1/4” SpongeNeoprene
21/8” (54mm)
1/2”(12.7mm)
Dual Screw Mounting
BRONZE COLOURDSS66D - Odd Size RollsDSS66D17 - 17 ft. (5.18m)DSS66D20 - 20 ft. (6.10m)DSS66D21 - 21 ft. (6.4m)DSS66D25 - 25 ft. (7.62m)DSS66D204 - 204 ft. (62.17m)
WHITE
DSS66W - Odd Size RollsDSS66W17 - 17 ft.DSS66W20 - 20 ft.DSS66W21 - 21 ft.DSS66W25 - 25 ft.DSS66W204 - 204 ft.
1/2” (12.7mm)
11/32” (8.73mm)
DSS66 FIRE LABELED
DSS11 FIRE LABELED1/4” (6.4mm)
3/16” (4.8mm)
DS142C Extruded Aluminum Clear Anodizedw/EPDM SpongeDS142D Extruded Aluminum Bronze Anodizedw/EPDM Sponge
SANTOPRENE GASKET SEAL SELF-ADHESIVE JAMB GASKETING
1/4”
1/2” (12.7mm)
3/16”
7/16” (11.1mm)
(6.35mm) (4.76mm)
DS44D Odd Size RollsDS44D17 17ft. (5.18m)DS44D20 20ft. (6.10m)DS44D21 21ft. (6.4m)DS44D25 25ft. (7.62m)DS44D204 204ft. (62.17m)DS44D500 500ft. (152.4m)DS44W17 17ft. (5.18m)DS44W20 20ft. (6.10m)DS44W21 21ft. (6.4m)DS44W25 25ft. (7.62m)DS44W204 204ft. (62.17m)DS44W500 500ft. (152.4m)
DS55D Odd Size RollsDS55D17 17ft. (5.18m)DS55D20 20ft. (6.10m)DS55D21 21ft. (6.4m)DS55D25 25ft. (7.62m)DS55D515 515ft. (156.9m)
FOR WOOD DOOR ANDMETAL FRAME
MonsantoSantoprene®
Self-adhesive, DarkBronze Colour, Flexible
from -80 to +150degrees fahrenheit.
Not affected bymildew, fungus orultra-violet light.
BRONZE COLOURDSS11D - Odd Size RollsDSS11D17 - 17 ft. (5.18m)DSS11D20 - 20 ft. (6.10m)DSS11D21 - 21 ft. (6.4m)DSS11D25 - 25 ft. (7.62m)DSS11D204 - 204 ft. (62.17m)
WHITE
DSS11W - Odd Size RollsDSS11W17 - 17 ft.DSS11W20 - 20 ft.DSS11W21 - 21 ft.DSS11W25 - 25 ft.DSS11W204 - 204 ft.
FOR HOLLOW METAL DOORAND METAL FRAME
FOR WOOD DOOR AND METALFRAME
FOR HOLLOW METALDOOR AND METALFRAME
DSR30BL Replacemnet NeopreneSponge Insert - Black
Insert
DSR39BL Replacemnet NeopreneSponge Insert - Black
Insert
Insert
DSR31BL Replacemnet NeopreneSponge Insert - Black
DSR34BL Replacemnet NeopreneSponge Insert - Black
Insert
Insert
DSR32BL Replacemnet NeopreneSponge Insert - Black
-
*DS113CN Clear Anodized w/Synprene*DS113DN Bronze Anodized w/SynpreneDSN17BL Synprene Insert Only - Black
DS170C Clear AnodizedDS170D Bronze Anodized.DS170 is for use with closers or holdopen devices in order to provide acontinuous weatherseal across thehead.DSN03BL Synprene Insert Only - Black
1” (25.4mm)
13/32” (10.3mm)
DS106B Extruded Aluminum Painted Brownw/SynpreneDS106W Extruded Aluminum Painted Whitew/SynpreneDSN17BL Synprene Insert Only - Black
11/4” (31.8mm)
1/2”(12.7mm)
*
Label Applies toJamb Applied Only
® ®
29A.K. DRAFT SEAL LTD.
Full Scale Except As Noted
DOOR WEATHERSTRIPPING
DS133C Extruded Aluminum Clear Anodizedw/ Synprene BulbDS133D Extruded Aluminum BronzeAnodized w/ Synprene BulbDSN33BL Synprene Insert Only - Black
DS143C Extruded Aluminum Clear Anodized w/Synprene BulbDS143D Extruded Aluminum Bronze Anodizedw/ Synprene BulbDSN43BL Synprene Insert Only - Black
11/4” (31.8mm)3/16”
(4.8mm)
DS100 Extruded Aluminum w/ Synprene InsertDS100D Extruded Aluminum Bronze AnodizedDSN00BL Synprene Insert Only - Black DS103 Extruded Aluminum w/ Synprene Insert
DS103D Extruded Aluminum Bronze AnodizedDSN03BL Synprene Insert Only - Black
11/8” (28.6mm)
1/4” (6.4mm)
*Up to 3 hoursmetal doors,1 hour wooddoors. Black only
DS112 Extruded Aluminum w/ Synprene InsertDS112D Bronze AnodizedDSN12BL Synprene Insert Only - Black
1/4”(6.4mm)
13/16”(20.7mm)
11/8” (28.6mm)
DS118C Clear AnodizedDS118D Bronze AnodizedUsed to Support Door Closer Soffitt PlateUsed as Stop Applied w/StripUsed as a Threshold Applied StopDSN03BL Synprene Insert Only - Black
13/4” (44.5mm)
11/2” (38.1mm)
11/2” (38.1mm)
1/4”(6.4mm)
1/4”(6.4mm)
11/8” (28.6mm)
1/4” (6.4mm)
13/8” (34.9mm)
5/8”(15.8mm)
*DS114BL36 Black 36" (914mm)*DS114BL84 Black 84" (2134mm)DS114T84 Tan 84" (2134mm)DS114W84 White 84" (2134mm)
POLYPROPYLENESELF-ADHESIVE DOOR GASKET
DS116T84 Tan 84” only DS117T84 Tan 84” onlyDS116W84 White 84” only DS117W84 White 84” only
VINYL-FLEX WEATHERSTRIPPINGADHESIVE BACKED DOOR GASKET
11/8”(28.6mm)
1/4” (6.4mm)
DS104 Extruded Aluminum w/Cold Temp Vinyl InsertDS104W Extruded Aluminum Painted White
DSV04GREY Insert Only For DS104 and DS104W
DS415B96 Brown 96” (2438mm)DS415B144 Brown 144” (3658mm)DS415W96 White 96” (2438mm)DS415W144 White 144” (3658mm)
COMPRESSIONWEATHERSEAL ADHESIVE
BACKED WHITE OR BROWN
7/16”(11mm)
3/8”(9.5mm)
Insert
DS104A17 17ft SetDS104A20 20ft Set
-
® ®
2 A. K. DRAFT SEAL LTD.
Full Scale Except As Noted
30
ADJUSTABLE-JAMB SOUND SEALS
SOUND TRANSMISSION CLASS (STC) RATED DOOR ASSEMBLIES
STC Ratingon Door
3040
50, 60
STC RatingDoor with
Gasket303739
PerimeterSeals
DS340DS340DS340
AutomaticDoor
BottomDS343CRDS343CRDS343CR
Threshold
DS174DS174DS174
RAIN DRIPS
11/2”(38.1mm)
5/8”(15.9mm)