WWW.DRAF TSEAL .COM | INFO@DRAF TSEAL .COM

Head Office: Vancouver, Canada | Branch Offices: Toronto, Canada & Los Angeles, USA

© COPYRIGHT A.K. DRAFT SEAL LTD This drawing remains the property of A.K. Draft Seal Ltd. and all its affiliates. The information contained in this drawing is not to be disclosed to any party without written approval from A.K. Draft Seal Ltd.

WEATHERSEALING SPECIALISTS SINCE 1960 | WWW.DRAFTSEAL.COM

NO SCALE

6-1/16” (154mm)8-9/16” (217mm)

2” (50.8mm)

1-1/8

” (29

mm

)

1-3/4” (44.45mm)

5° slope

1-3/1

6” (3

1mm

)

3/16” (4.7mm)

3/8”(9.5mm)

DS696AOAK Mill finish with oak cap

DS696DOAK Bronze anodized with oak capDS725EXT Nose extension, 2"

ORDER NOSE SEPARATELY

1-3/4” (45mm)

10-3/4” (273mm)

DSISSGASKET214

OAK CAP

DS1 STORM (GEN 1) - INSWING SILL SYSTEM, PRE-HUNG DOOR APPLICATION

DS1 STORM - SILL SYSTEM, INSWING PRE-HUNG DOOR APPLICATION

DS725BEADAE150 aluminum mill finishDS725BEADDE150 bronze anodized 150” (3810mm) length only

Main cover cap pvc (snap-on)

Main sill assembly: PVC substrate available in tan only. Aluminum sill available in 2 colours: mill finish (A) & bronze anodized (D)

DS725CAPTVE150 tanDS725CAPBLVE150 black150” (3810mm) length only

DS725AV150 7-1/4” sill x 150” or DS696AV150 6-9/16” sill x 150” or DS496AV150 4-9/16” sill x 150”

When Ordering DS1 Storm - Sill System, ELEVEN (11) Components Are Required To Assemble A Complete Sill:

1

3

6

9 10 11

7 8

4 5

2

1 PVC main cover cap & interior cover cap - included 7 Sill to jamb sealing gaskets - order separately2 Main sill assembly (substrate / aluminum) with weep hole covers - included 8 Head jamb to side jamb gaskets - order separately3 TPV Foam continuous cornering weatherseal - order separately 9 Strike plate and cup for double door- order separately4 Aluminum sill bead - not included order separately 10 Protective PVC Sill Covers- order separately5 Aluminum sill nose extensions: 1”(25.4mm), 2”(50.8mm), 3”(76.2mm) order separately 11 Interior substrate cover cap - included6 Plastic sill nose extension end caps - order separately

Sill nose extension end caps

Strike plate and cup for inswing or outswing double doors using DS1 storm sills and astragals.

Sill to jamb gasket (adhesive both sides) Head jamb to side jamb gasket

Sill bead (snap-in) Sill nose extensionsContinuous cornering weatherseal (kerf slot inserted)

DS725ECAPBL 1 x left hand 1 x right hand, black only

DS420BL500 black (6 fin) DS420BEIGE500 beige (6 fin)

DS726HGASKET fits up to 10" (254mm) jamb

DS725INTCBLVE150 black DS725INTCTVE150 tan. 150” (3810mm) length only

Protective PVC Sill Covers, 74" (1880mm) lengths Interior Substrate Cover Cap

Fits all DS1 Storm sills (inswing) with oak cap. Trim to suit.

Fits all DS1 Storm sills (inswing) with PVC cap. Trim to suit.

exterior protective pvc cover

Protect this fantastic sill during home construction

interior protective pvc cover

DS696SPC74 fits DS850 & DS696 with 2" (51mm) noseDS725SPC74 fits DS725 with 2" (51mm) noseDS750SPC74 fits DS750 onlyDS764SPC74 fits all Storm Sills (covers interior portion of sill only)

screw entry for attaching end cap to sill nose

DS7500WHCBL Weep hole cover included with sill

DS725FBCUPSETB brown DS725FBCUPSETT tanDS725FBCUPSETW white

2” (50.8mm)

1-5/16”(33mm)

Warranty void if all sill noses are not secured to all DS1 Storm Sills as shown.

Order separately

DS421BL Black DS421B Brown DS421W White

OR Bead is cut shorter than sill to accomodate cornering kerf in gasket

Bead

1-3/4” (45mm)

10-1/4” (261mm)

1-7/32” (31mm)

10” (254mm)

1-3/4” (45mm)

10-3/4” (273mm)

DS725SGASKET

DSISSGASKET214

ALL DRAWINGS NO SCALE