SOUDURE ALUMINOTHERMIQUE ALUMINOTHERMIC WELDING
Transcript of SOUDURE ALUMINOTHERMIQUE ALUMINOTHERMIC WELDING
SOLDAL
Electra - KLK - Europe
Ferroviaire / Railway
SOUDURE ALUMINOTHERMIQUE
ALUMINOTHERMIC WELDING
Couverclede couleur
Poudrede soudage
Poudred'allumage
Couvercle noir
CARTOUCHE
Couvercle
Poudre d'allumage
Poudre de soudage
Disque obturateur
Trou de coulée
Chambrede soudure
Câbles
MOULE
La chaleur obtenue par la réaction exothermique, ne faisant appel à aucune autre source extérieured'énergie, permet de liquéfier les métaux contenus dans le creuset. Le disque obturateur a une triplefonction: retenir la poudre avant l'allumage, permettre une réaction chimique homogène avant la coulée etenfin assurer une séparation entre le laitier (oxyde d'aluminium) et le métal en fusion (cuivre) dont la densitéest plus élevée.
oLa température dégagée (environ 2500C) est supérieure au point de fusion des métaux comme le cuivre,l'acier, le laiton, le bronze, etc.Les pièces à souder, préalablement introduites dans la chambre de soudure, vont être fusionnées parl'apport calorique du métal liquéfié.Le résultat obtenu est une liaison mécanique et électrique faite d'un alliage composé des différents métauxissus de la fusion.
Du fait de sa structure intra-moléculaire, cette liaison présente de nombreux avantages:• Totalement inaltérable par la corrosion.• Caractéristiques électriques supérieures à tous les autres types de connexions
mécaniques, serties, etc, etc.• Caractéristiques mécaniques optimales.• Aucune influence diélectrique du fait de métaux différents.
PR
INC
IPE
SD
EB
AS
E
Le procédé de soudure aluminothermique est une réaction exothermique qui consiste enKLK-SOLDALune réduction de l'oxyde de cuivre par l'aluminium.
Le principe chimique de base est:
3 CuO + 2 Al Cu + Al O + Chaleur2 3
ce qui peut être traduit par:
Oxyde de Cuivre + Aluminium + Alliages Cuivre + Oxyde d'aluminium + Chaleur
La réaction a lieu dans un moule fabriqué à partir de graphite (50 à 100 soudures), ou de sable à usageunique.
SOLDAL
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
Exothermic reaction, used in the KLK-SOLDAL process, consists in a reduction of copper oxide byaluminium.
The basic chemical principle is
3CuO + 2 Al Cu + Al 0 + Heat2 3
In clear
Copper oxide + Aluminium + Alloys Copper + Slag + Heat
The reaction takes place in a mould made out of sand for one use or made out of a graphite block formulti uses (50 to 100 welds)
Color cap
Weldingpowder
Startingpowder
Black cap
CARTRIDGE
Cover
Starting powder
Welding powder
Shutter disc
Tap hole
Weldingcavity
Cables
MOULD
BA
SIC
PR
INC
IPLE
SThrough the only heat resulting from the exothermic reaction, metals contained in the mould crucible will bemoltened. The shutter metal disc has a triple function : to hold the powder before ignition, to obtain ahomogeneous chemical reaction before casting and to obtain the separation between slag (aluminiumoxide) and molten copper of higher density.
Heat obtained (about 2500°) is higher than the melting point of metals like copper, steel, brass, bronze,aso,...Elements to be welded, first introduced in the weld cavity, are melted by the heat of the molten metal.The result will be a mechanical and electrical connection composed of an alloy of the different metalsresulting from the fusion.
By its intra-molecular structure, this link presents only advantages :• Totaly unaffected by corrosion.• Electrical characteristics higher than any other types of mechanical
connections, crimping, aso.• Optimal mechanical characteristics.• No dielectric influence due to different metals.
SOLDAL
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
GU
IDE
DE
MIS
EE
NO
EU
VR
E
SOLDAL
A l’aide d’une meule appropriée,supprimer totalement tout point derouille de la surface à braser. Lemétal du rail doit être à nu.L’opération de meulage et denettoyage du rail doit êtreeffectuée avec le plus grand soincar elle conditionne la bonnequalité de la soudo-brasure.
Fermer complètement la pinceainsi que le moule, ajouter dumastic entre le câble et le moulepour empêcher tout risque de fuitede métal en fusion.
MASTIC
Si le câble est isolé, le dénudersur une longueur d’environ 15cm.
Avec la brosse à cardes ,brosser les zones à souder pouren ôter le poussière ainsi que leso x y d e s
BR-CA
Vérifier que l’extrémité du câble sesitue bien au milieu du trou decoulée.Disposer le disque métallique (setrouvant avec la poudre desoudage) dans le creuset au centredu trou de coulée, la partie coniquevers le bas.
Ouvrir le capuchon de couleur de lacartouche contenant la poudre desoudage et la verser dans lecreuset.Ouvrir le capuchon noir de lacartouche et saupoudrer la poudred’allumage sur celle de soudage enprenant soin d’en mettre un peu surle bord du moule.
Après avoir fermé le couvercle dumoule, mettre à feu la poudre avecl’allumeur AL-FI.
Fa i re t rès a t tent ion auxp r o j e c t i o n s d e m a t i è r e sincandescentes
Attendre et ouvrircomplètement la pince pourextraire les pièces soudées.
une minute
Durant cette opération faireattention à ne pas abîmer lemoule, fragilisé par la très hautetempérature de la réaction.
Enlever le corindon restant dans lecreuset et le trou de coulée avec legrattoir . Eliminer la poussière detoutes les parties du moule et deson couvercle avec le pinceau
R-
BR-PC.
Si le moule est encore chaud,d’autres soudures peuvent êtreréalisées sans le préchauffer.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
Avant la première soudure, il estobligatoire de préchauffer lamoule avec une lampe à souder
durant aumoins.C e t t e o p é r a t i o n e s t t r è si m p o r t a n t e p o u r é l i m i n e rl’humidité qui peut provoquer dessoudures poreuses.
TORCHE 5 minutes
OP
ER
AT
ING
INS
TR
UC
TIO
NS
SOLDAL
Remove slags out of the tap-holeand mold cucible with the scraper.Clean the weld cavity with themould brush BR-PC.
Al long as the mould is hot anddry, further weldings can bemade without preheating.
Open the color cap of the weldingcartridge and dump the exothermicpowder in the mould crucible.Open the black cap of the cartridgeand sprinkle the starting powderupon the welding powder.Put some starting powder on thetop edge of the mould to facilitateignition.
Before operating a first weld, themould has to be pre-heated withthe gaz torch during
at least.This operation is very usefull toeliminate dampness which wouldcause porous weldings
TORCHE 5minutes
Using an adapted buffing wheel, tocompletely remove rust of surfaceto be brazed. The rail will be naked.This operation must becarried out with the greatest carebecause it conditions the goodquality of the welding.
cleaning
Check that extremity cable is on themiddle of the tap-hole.Place the metallic disc (which canbe find in the welding powder’s box)on the tap-hole inside the crucible,conical side fowards the bottom.
Open the handle clampafter ignition. Open the
mould completly to release thewelding.
oneminute
Take care during handling themould not to damage it.
Close and lock the handle clamp,place between the cableand the mould to avoid loss ofmolten metal.
MASTIC
MASTIC
Strip off the isolation of the cable onabout 15 cm.
Clean the surfaces to be weldedwith the cardclothbrush toremove oxides and dust.
BR-CA
Close the mould cover. Bringsideways the flint igniter AL-FIand fire the start ing powder.
Take care of throwing out ofincandescent materials.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
MRR (P-10) MLT (P-11)
CRA-PH (P-12)
BRA-V (P-13) SEI (P-14)
ELPA (P-9)
FL
UX
FerroviaireRailway
Tableau de sélectionSelection chart
CRA-TP (P-12) MRLA (P-13)
SOLDAL
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
SEI/PR (P-14)
MRHC (P-16)MRLC (P-15) MRTC (P-15)
SOLDAL
ELPA
35507095120150185240
ELPA-35KELPA-50KELPA-70KELPA-95KELPA-120KELPA-150KELPA-185KELPA-240K
mm² KIT
La connexion de câbles en cuivre sur des aciersdurs et extra-durs avec le kit ELPA de KLK-Soldal est le seul type de raccordement degrande tenue mécanique qui protègecomplètement la structure métallurgique,chimique, physique et dynamique de votre railtout en assurant une conductibilité électriqueparfaite.
The connection of copper cables on hard andhardened with kit ELPAof KLK-Soldal is theonly type of connection with great mechanicalresistance which protects themetallurgical, chemical, physical and dynamics
of your rail while ensuring a perfectelectric conductibility.
steels
completely
structure
FL
UX
FL
UX
0.393.1209.5
0.393.1210.30.393.1211.1
0.393.1212.9
Symbole S.N.C.F.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
Câble sur patin du railCable to rail foot
MRR-50GSDRR-50C-45RMRR-95GSDRR-95C-65RRR-95LMRR-120GSRR-120
mm²
MRR
25355070959595120
RR-25RR-35RR-50RR-70RR-95RR-95RRR-95LRR-120
MRR-25GMRR-35GMRR-50GMRR-70GMRR-95GMRR-95GMRR-95GMRR-120G
MRR-25DMRR-35DMRR-50DMRR-70DMRR-95DMRR-95DMRR-95DMRR-120D
C-32RC-32RC-45RC-65RC-65RC-65RC-65RC-115
SDRR-50SDRR-50SDRR-50SDRR-95SDRR-95
SRR-50SRR-50SRR-50SRR-95SRR-95SRR-95SRR-95SRR-120
RRRRRRRRRRRRRRRR
Soudure aluminothermiqueExothermic weldingAluminothermische Schweißung
SOLDAL
Electra-KLK-Europe
RéférenceElectra-KLK-Europe
Référence
7.393.4923.17.393.4939.77.393.4950.47.393.4921.57.393.4935.57.393.5842.27.952.0691
Références et symbolesPart numbers and symbols
0.002.49230.110.49390.005.00050.002.49210.110.49350.005.00060.010.03110.002.40160.110.4016
MRR-50DSRR-50RR-50MRR-95DSRR-95RR-95RR-95RMRR-120DC-115
7.393.4924.9
7.952.06947.393.4922.37.393.4936.37.952.0690
0.002.49240.110.40130.010.03000.002.49220.110.49360.010.03100.010.03150.002.41161.005.0008
Soudure d’une liaison électrique (Type RR) entre deux rails éclissés d’une même file.Electric connection welding (type RR) on the head of the rails.
Symbole S.N.C.F. Symbole S.N.C.F.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
Connexion au champignonRail head bond
MLT
mm²
3570185
MLT-75MLT-75MLT-185
ME-75+ MPOME-75+ MPOME-185+ MPO
C-65R
C-90RC-65R
R-45R-45R-90
SLT- 75SLT- 75SLT-185
E-35E-75E-185
MLT-75C-65R
ME-75MPOE-75E-35
SLT-75
Electra-KLK-Europe
RéférenceElectra-KLK-Europe
Référence
7.393.49327.393.5842.27.393.49407.393.61927.393.61907.952.06957.952.0742
0.002.49320.005.00060.110.49400.010.61920.010.61900.010.06950.010.0742
MLT-185C-90RSLT-185ME-185MPOE-185
7.393.49307.393.49517.393.49367.393.49627.393.61907.952.0693
0.002.49300.005.00070.110.49360.010.49620.010.61900.010.0693
Références et symbolesPart numbers and symbols
SOLDAL
Soudure d’une liaison électrique (Type NV) à partir d’un champignon de rail.Electric connection welding (type NV) to the head of the rail
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
Symbole S.N.C.F. Symbole S.N.C.F.
Connexion au champignonCable to rail head
CRA-TP Câble sur patin du railCable to rail foot
mm²
10162535507095120150185240
CRA-TP-10CRA-TP-16CRA-TP-25CRA-TP-35CRA-TP-50CRA-TP-70CRA-TP-95CRA-TP-120CRA-TP-150CRA-TP-185CRA-TPL-240
C-45C-45C-45C-45C-45C-65C-90C-115C-115C-150C-200
R-45R-45R-45R-45R-45R-45R-90R-90R-90R-150R-150
TRA-PTRA-PTRA-PTRA-PTRA-PTRA-PTRA-PTRA-PTRA-PTRA-PTRA-P
MAS+E-10MAS+E-16MASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTIC
Soudure d’un câble en cuivre sur le patin du rail.Copper cable welding on the rail foot.
CRA-PH
10162535507095120150185240
CRA-PH-10CRA-PH-16CRA-PH-25CRA-PH-35CRA-PH-50CRA-PH-70CRA-PH-95CRA-PH-120CRA-PH-150CRA-PH-185CRA-PH-240
C-45C-45C-65C-90C-90C-115C-150C-200C-200C-250
2x C-150
R-45R-45R-45R-90R-90R-90R-150R-150R-150R-150R-750
TSC-80TSC-80TSC-80TSC-80TSC-80TSC-80TSC-80TSC-80TSC-80TSC-80TSC-80
MAS+S-10MAS+S-16MASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTIC
mm²
SOLDAL
Soudure d’un câble en cuivre entre l’âme et le patin du rail.Copper cable welding to rail web-foot fillet.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
Câble sur patin du railCable to rail web-foot
MRLA Câble sur l’âme du railCable to rail web
mm²
10162535507095120150185240300
MRLA-10D-16D-25D-35D-50D-70D-95D-120D-150D-185D-240D-300D
MRLAMRLAMRLAMRLAMRLAMRLAMRLAMRLAMRLAMRLAMRLA
MRLAMRLAMRLAMRLAMRLAMRLAMRLAMRLAMRLAMRLAMRLAMRLA
-10G-16G-25G-35G-50G-70G-95G-120G-150G-185G-240G-300G
C-45C-45C-45C-45C-65C-90C-90C-115C-150C-200C-200C-250
R-45R-45R-45R-45R-45R-90R-90R-90
R-150R-150R-150R-150
TRA-ATRA-ATRA-ATRA-ATRA-ATRA-ATRA-ATRA-ATRA-ATRA-ATRA-ATRA-A
MAS+S-10MAS+S-16MASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTIC
SOLDAL
BRA-V Boulon sur l’âme du railBolt to rail web.
M6M8M10M12M16
BRA-V-M6BRA-V-M8BRA-V-M10BRA-V-M12BRA-V-M16
C-25C-32C-65C-90C-115
R-45R-45R-45R-45R-90
TSC-80TSC-80TSC-80TSC-80TSC-80
M
Soudure d’un câble en cuivre sur l’âme du rail.Copper cable welding to the rail web.
Soudure d’un boulon sur l’âme du rail.Welding of threaded studs to rail web.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
SOLDAL
SEI Cable sur rail à gorgeCable to running track
mm²
10162535507095120150185240
SEI-10DSEI-16DSEI-25DSEI-35DSEI-50DSEI-70DSEI-95DSEI-120DSEI-150DSEI-185DSEI-240D
SEI-10GSEI-16GSEI-25GSEI-35GSEI-50GSEI-70GSEI-95GSEI-120GSEI-150GSEI-185GSEI-240G
C-45C-45C-45C-45C-45C-65C-90C-115C-115C-150C-200
RRRRRRRRRRRRRRRRRRRRRR
SLP-SEISLP-SEISLP-SEISLP-SEISLP-SEISLP-SEI
SLP-SEI-240SLP-SEI-240SLP-SEI-240SLP-SEI-240SLP-SEI-240
MAS+S-10MAS+S-16MASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTIC
SEI/PR
mm²
10162535507095120150185240
C-45C-45C-45C-45C-45C-65C-90C-115C-115C-150C-200
RRRRRRRRRRRRRRRRRRRRRR
MAS+S-10MAS+S-16MASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTICMASTIC
SLP-SEISLP-SEISLP-SEISLP-SEISLP-SEISLP-SEI
SLP-SEI-240SLP-SEI-240SLP-SEI-240SLP-SEI-240SLP-SEI-240
SEI-10G/PRSEI-16G/PRSEI-25G/PRSEI-35G/PRSEI-50G/PRSEI-70G/PRSEI-95G/PRSEI-120G/PRSEI-150G/PRSEI-185G/PRSEI-240G/PR
SEI-10D/PRSEI-16D/PRSEI-25D/PRSEI-35D/PRSEI-50D/PRSEI-70D/PRSEI-95DSEI-120DSEI-150DSEI-185DSEI-240D
/PR/PR/PR/PR/PR
Soudure d’un câble en cuivre sur le patin d’un rail à gorge.Copper cable welding to the running track.
Soudure d’un câble en cuivre sur une piste de roulement.Copper cable welding to the grooved rail.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
Cable sur piste deroulementCable to grooved rail
SOLDAL
MRLC Cosse sur rail en LClamp to L rail
35 x 850 x 8
MRLC-35x8GMRLC-50x8G
MRLC-35x8DMRLC-50x8D
MRLC-35x8VMRLC-50x8V
C-115C-150
R-45R-45
SMRLC-GSMRLC-DSMRLC-V
mm
Soudure d’une cosse mécanique sur un rail en L (Capacité de la cosse jusqu’à 240mm²)Autres dimensions de cosses ou sections de câbles: sur demande.
Clamp welding to L rail (max. clamp capacity 240mm²)On request other dimensions of clamps and cable sections.
MRTC Cosse sur rail en TClamp to T rail
35 x 850 x 8
MRTC-35x8GMRTC-50x8G
MRTC-35x8DMRTC-50x8D
MRTC-35x8VMRTC-50x8V
C-115C-150
R-45R-45
mm
Soudure d’une cosse mécanique sur un rail en T (Capacité de la cosse jusqu’à 240mm²)Autres dimensions de cosses ou sections de câbles: Sur demande.
Clamp welding to T rail (max. clamp capacity 240mm²)On request other dimensions of clamps and cable sections.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
SMRTCSMRTC
MRHC
SOLDAL
mm²
10162535507095120150185240300
MRHC-10MRHC-16MRHC-25MRHC-35MRHC-50MRHC-70MRHC-95MRHC-120MRHC-150MRHC-185MRHC-240MRHC-300
C-45C-45C-45C-65C-90C-90C-115C-115C-150C-200C-200C-250
R-45R-45R-45R-45R-90R-90R-90R-90
R-150R-150R-150R-150
MSMSMSMSMSMSMS
TSC-80TSC-80TSC-80TSC-80TSC-80
S-10S-16
Soudure d’un câble cuivre, d’une tresse ou d’une cosse mécanique sur un rail en H.Autres dimensions de cosses ou sections de câbles: Sur demande.
Welding of copper cable or clamp to H rail.On request other dimensions of clamp and cable sections.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
Soudure sur rail en HWelding to H rail
FerroviaireRailway
Connexion 50 mm²Préformage/Standard preforming
185 mm
RR-50
Connexion 95 mm²Préformage/Standard preforming
Longueur/Length: 175 mm
RR-95285 mm
RR-95R405 mm
RR-95L
SOLDAL
Connexion 120 mm²Préformage/Standard preforming
Longueur/Length: 175 mm
RR-120
Connexion type NVFabrication sur demande/Manufacturing on request
Section/ :SectionLongueur(L)/Length(L):
75 mm²
NV-L95 mm²
NV-L185 mm²
NV-L
Autres fabrications sur demande/Other manufacturings on request
Longueur/Length:
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
LES CONNEXIONS
COPPER BONDS
FerroviaireRailway
SOLDAL
Cartouches KLK-Soldal / KLK-Soldal cartridges
Type C-15
20 20 20 20 10 10 10 10 10 10
C-25 C-32R C-45R C-65R C-90R C-115 C-150 C-200 C-250
CouleurColour
Gris clair
Light grey
Gris foncé
Dark grey
Violet
Violet
Blanc
White
Jaune
Yellow
Orange
Orange
Rouge
Red
Marron
Brown
Bleu
Blue
Vert
Green
Cartouche et disque obturateur:La cartouche contient la poudre de soudage (couvercle de couleur) et lapoudre d’allumage(couvercle noir).Le disque métallique est introduit dans le creuset afin d’obturer le trou decoulée avant de déposer la poudre de soudage.Cartridge and shutter disc:The cartridge contains the welding powder (color cap) and the starting powder(black cap).The metal disc is used to seal the tap-hole before placing the welding powder .
Les cartouches de soudure et opercules sontconditionnés dans des boîtes mises sous filmplastique étanche, garantissant uneconservation de la poudre dans les meilleuresconditions, pour un allumage aisé, mêmeaprès un long stockage.
Cartdriges and shutter discs are packed inboxes that are hermetically sealed in plasticbags to keep the powder in good conditions,dry and ready for welding, even if stored for alongtime.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
LES CARTOUCHES
WELDING POWDER
Les pinces sont étudiées et réalisées avec leplus grand soin.Chaque pince correspond à un type précis demoule.Bien entretenue, les pinces KLK-SOLDAL ontune très longue durée de vie.
FerroviaireRailway
SOLDAL
Pince TRA-CPince SDRR
Pince TRA-A/SMRLCPince TRA-P/SLP-SEIPince TSC-80
Pince SMRTC/MS
Handle clamps are carefully designed andmanufactured.
matches a precise type ofmould.
have a longlifespan.
Each handle clamp
KLK-SOLDAL handle clamps
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
LES PINCES
CLAMPS
FerroviaireRailway
Le pistolet d’allumageAL-FI permet d’effectuer un grand nombre de mise à feude la poudre d’allumage. Nous fournissons également des pierres derechange.Flint ignitor AL-FI allows a great number of startings of the powder. We alsoprovide flint stones for the ignitor.
FerroviaireRailway
Le grattoir, ou curette pige, de type R est destiné à tous les moules graphite dela gamme KLK-SOLDAL: R-45, R-90, R-150, R-300 ou R-750.The mould scraper of type R is intended for use with all the range KLK-SOLDALmoulds: R-45, R-90, R-150, R-300 or R-750 .
of
SOLDAL
Le grattoir, ou curette-pige, de type RR est spécialement destiné aux moulesMRR.The mould scraper of type RR is specially intended for use with MRR moulds.
L’utilisation de la brosse à carde BR-CA est recommandée pour le nettoyageet le désoxydage des câbles en cuivre et des pièces métalliques avant de lessouder.Cardclothbrush BR-CA is used to clean the materials to be welded.
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
LES ALLUMEURS
FLINT IGNITORS
LES GRATTOIRS
SCRAPERS
FerroviaireRailway
Embouts en cuivreCopper sleeves
E-10E-35E-75E-95E-185E-240
Matrices pour embouts en cuivreDies for copper sleeves
ME-75 + MPOME-185 + MPOME-240 + MPO
FerroviaireRailway
L’utilisation du Mastic KLK-SOLDAL est recommandé lors de la réalisation de soudures de câbles nonmanchonés sur des surfaces métalliques ( ex: rails).
Le Mastic KLK-SOLDAL est un élastomère résistant aux très hautestempératures. Un peu de Mastic disposé dans le passage du câble dans lemoule en graphite entre le câble et la surface métallique empêche toutecoulure intempestive de matière en fusion lors de la réaction exothermique.It is recommended the use of KLK-SOLDAL to weld nakedcables on metal surfaces (ex: rails).
MASTIC sealer
KLK-SOLDAL MASTIC sealer is a heat-resistant product used to avoidleaks of the melted metals during the exothermic welding.
Electra-KLK-Europe
6, rue de l’Orge • ZA de l’Europe BP-90010 • F-68921 WINTZENHEIMTel : (33) 0.389.20.17.30 • Fax : (33) 0.389.20.17.31 • e-mail : [email protected]
•
Electra-KLK-Europe
Soudure aluminothermiqueExothermic welding
EMBOUTS & MATRICES
SLEEVES & DIES
MASTIC
MASTIC