Sketch
3
DN80 DN150 DN80 DN80 DN150 Tapping 6" 1 1/2" 1 1/2" * will be the same for all four, so each hot tap wil Tapping point will be at this line, 6", around this location. It will be a 1 1/2" hole. Unit 1 and Unit 2 are identical. and each branch out has a return line.
-
Upload
josediaz141 -
Category
Documents
-
view
212 -
download
0
description
soportes
Transcript of Sketch
UNIT 2
DN80 DN50
DN150 DN80 DN80 DN150
UNIT 1
Tapping
6"1 1/2" 1 1/2"
1/2" Ball valve
3/8 adapter
* will be the same for all four, so each hot tap will be serving two modules requiring 1 m3/h each
Tapping point will be at this line, 6", around this location. It will be a 1 1/2" hole.
Unit 1 and Unit 2 are identical. and each branch out has a return line.
DN300
DN400 = 16" DN50 = 2"DN300 = 12" DN40 = 1 1/2"DN200 = 8"DN150 = 6"DN125 = 5"DN80 = 3"
DN150 DN200DN50 DN50 DN125 DN125 DN40
300-400 m3/hDN400/16" Supply
Return
6"
1/2" Ball valve
3/8 adapter
* will be the same for all four, so each hot tap will be serving two modules requiring 1 m3/h each