SKB PULL-HANDLE CASE DESIGNSSET NEW TRANSPORT STANDARDS.

Current Available Sizes

The engineering team at SKB is rolling out the latest line of multi-functional military style transport cases. A

perfect combination of superior rotationally molded strength and ergonomic design. Inpenetrable, yet lightweight

LLDPE shell provides maximum impact resistence as well as UV and solvent resistence. Complete gasket seal and

pressure relief valve makes these cases absolutely watertight while stainless steel hardware prevents rusting. These

cases are designed and built to withstand levels

of punishment in excess of all ATA and

most industrial and military shipping

specifications.

Cases can be ordered with pull-

handle assembly or without. Pull-handles can be added to any case and are easily

field installed. Interior choices include padded divider grids, layered cube foam or

empty as shown in photo. Of course, as always, SKB stands behind every case with

an unconditional LIFETIME WARRANTY.

3R2217-10B3R2222-12B3R2222-20B3R2423-17B3R2424-24B3R2727-18B3R2727-27B3R3025-15B

*****

Mil-Std case 3/7.5 Deep Mil-Std case 3/9 Deep Mil-Std case 3/17 Deep Mil-Std case 3.5/13.5" deep Mil-Std case 3/21 Deep TBATBAMil-Std case 3.5/11.5 Deep

Designed with stackingin mind, these cases havea deep interlocking fourpost stacking pattern forabsolute stability. Rubbersurfaced grips on springloaded handles make liftingand loading a snap.

All cases are available withor without wheels.All cases are available withfoam interiors or padded griddivider systems.

INDUSTRIAL UPDATE

November 2003VOL 3, ISSUE 4

www.skbcases.com

WATERTIGHT: per Federal Test Method 5009.1

STAINLESSHARDWARESTANDARD

Can be ordered withor without pull-handles

and wheels.

* in process . . . call for availability.

These optionscan be added at any timeand are easily field installed.

Compoundhinge technology

allows 270° door swingrange even when cases are

in a stacked position 3SKB-R910U

3SKB-R916U

3SKB-R12U

3SKB-R14U

10U Roto Industrial Shock Rack

16U Roto Industrial Shock Rack

12U Roto Industrial Shock Rack

14U Roto Industrial Shock Rack

THE ULTIMATEEXTREME PROTECTIONSHOCK RACK

SKB's R&D processincludes ongoing independent testing

SKB Introduces Bold Advancements in Shockmount Rack TechnologySKB Introduces Bold Advancements in Shockmount Rack Technology

During the last 26 years SKB has designed and built more rack cases than any company. In the fall of 2001 SKB began the development of the ultimate shock-rack system. Careful analysis of existing rackmount technology led SKB engineers to re-examine every detail and focus on making numerous significant design upgrades resulting in a product that now sets the standard in shock-resistant transport.

The rack frame: The completely redesigned frame is an engineering masterpiece. Threaded steel rails and aluminum cross components are clamped together in an “H” shaped rigid configuration by four, 3/16" solid steel rivets at every intersection.

Compound hinge* system (Patent Pending): Open the superb quality field-replaceable latches on the left-hand side of the door and the lid swings out … and completely around to lie flat against the main body. If you want to go “lid-less” they can be removed with an effortless lift motion and reinstalled with the same ease in seconds.

“Plug fit” lids: The lids are designed to protrude into the base of the case approx. 1”. Their unique double wall structure makes them incredibly stiff where this intersection occurs. For this reason, this new generation of shock racks achieves mil-spec sealing characteristics with significantly fewer latches than the competition. This allows rapid deployment in an up-right configuration…even when stacked.

Stackability: Most shockmount cases will allow for some level of stackability. The new SKB shock-rack system takes this necessary feature to a new level. These cases stack securely with the wheels on…or off. Additionally, the revolutionary design is also the only one that will open, front and back, while stacked.

Accessories: A growing list of available options and accessories now includes the best-designed removable slide-in caster system in the industry, airtight/watertight automatic relief valves, key lockable latches, payload rear support system and nomenclature per mil-specs, additional field installable shocks and custom colors.

Elastomers: All SKB shock-racks come standard with 8ea. HM-245 elastomeric high-damping, wide temp. range shock mounts. Shear spring rate is 50 lbs/in.

Additional or stiffer shock mounts may be ordered from the factory, and are easily field-installed.

Standard depth front to rear rail: 24”Each lid is 4.5" deep.

Independent Performance Testing: Numerous drop tests were performed by an independent lab: Performance Testing Laboratories, LLC. Orange, CA. Test payload was 100 lbs.

*SKB Corp has applied for patents on the compound hinge system.

relief valves

rotationallymolded double

walled body forexceptional strength

slide mount casters with spring-out position stops

SKB Introduces Bold Advancements in Shockmount Rack TechnologySKB Introduces Bold Advancements in Shockmount Rack Technology

1SKB-R904U

1SKB-R906U

1SKB-R908U

1SKB-R910U

4U Roto Shock Rack

6U Roto Shock Rack

8U Roto Shock Rack

10U Shock Rack

NEW 20" ROTOSHOCK RACKS

"this case exhibits the ultimate advancements in shockmount technology"

SKB's new Roto Shock Racks feature a (20" deep) roto molded tough shell with an

integrally molded valance that eliminates the need for a metal valance on the outside

of the case. Both front and rear doors are fitted with rubber gaskets for water resistant

protection. The integrated molded valance, ergonomic handles and recessed, bumper

protected heavy-duty twist latches allow these cases to meet most ATA and military

specifications.

As well as roto-molded toughness and ATA compliance, new elastomeric shock

technology has replaced the metal coil system to provide an increased level of

protection for valuable equipment. Field replacing our standard elastomeric shocks

with additional available shocks can accommodate multiple weight bearing

requirements.

• Redesigned frame with threaded steel rails and aluminum cross components forming an "H" shaped rigid configuration.• Unique "plug" style lid sealing system. Lids penetrate the body with an approximate 1" molded-in protrusion that provides both outstanding sealing and anti-shear properties.• Patent-pending compound hinge system allows the lids to swing out 270˚ and rest along the sides of the case. Or they can be easily removed and reinstalled in seconds.• Standard rack depth front to rear rail is 24" and each lid is 4" deep.• Stacks securely with wheels on or off and this revolutionary design also allows for both lids to open completely while cases are stacked.• Comes standard with 8 each HM-245 elastomeric, high damping, wide temperature range shock mounts with a shear spring rate of 50lbs./in.• Additional or stiffer shock mounts may be ordered from the factory and are easily field-installed.• Standard high quality slide-in/out locking swivel 4" casters rated at 1,200 lbs.• Airtight/watertight automatic relief valves.• Stainless steel key-lockable latches.• Easy-grip molded handles.• Custom colors are available. Contact the SKB factory directly for quantity requirements.

Molded-in handles andsecure stackability.

Both lids can becompletely removed and

re-attached simply and quickly.

Plasma Monitor TransportPlasma Monitor Transport

Custom Transport Systems for Stage Lighting

SHIPPING SOLUTIONS:

The Truck-PackContainer

SHIPPING SOLUTIONS: