Siemens NEMA IEC Selection and Pricing Guide 2009 2010

AC Motors Selection and Pricing GuideCatalog D81.2, U.S./Canada 2009 - 2010

Answers for Industry.

NEMA and IEC Motors

CCCCCaaatttaaaallloooggg DDD88811...222,, UUU..SSS...///CCCaaannaaaaadddddaaaaa 2222200000000000999999 ---- 222222200000111110000

The worlds most efficient line

of low voltage AC motors.

Siemens NEMA and IEC motors are designed to provide maximum

durability, performance, efficiency, reliability, and availability.

1-12009-2010 Low Voltage AC Motors Selection and Pricing Guide

Table of Contents

Introduction Table of Contents ....................................................................................................................................................... 1-1 Disclaimer .................................................................................................................................................................. 1-5 NEMA Motor Features at a Glance ............................................................................................................................... 1-6 IEC Motor Features at a Glance ................................................................................................................................. 1-10 Wide Selection of Motors .......................................................................................................................................... 1-12 Cancellation Charges & Change Notices .................................................................................................................... 1-13 Warranty Procedure .................................................................................................................................................. 1-14

General Purpose Motors GP10A ........................................................................................................................................................................2-1 High Ef ciency (Cast Aluminum Frame) Horizontal, Foot Mounted ......................................................................................................................2-2 C-Face, Horizontal, Foot Mounted ..........................................................................................................2-3 C-Face, Horizontal, Footless ....................................................................................................................2-5 GP10 ...........................................................................................................................................................................2-7 High Ef ciency (Cast Iron Frame) Horizontal, Foot Mounted ......................................................................................................................2-8 C-Face, Horizontal, Foot Mounted ........................................................................................................2-12 C-Face, Horizontal, Footless ..................................................................................................................2-13 RGZP .........................................................................................................................................................................2-15 High Ef ciency (Cast Iron Frame) Horizontal, Foot Mounted ....................................................................................................................2-16 GP100A .....................................................................................................................................................................2-18 NEMA Premium Ef ciency (Cast Aluminum Frame/Aluminum Rotor) Horizontal, Foot Mounted ....................................................................................................................2-19 NEMA Premium Ef ciency Plus (Cast Aluminum Frame/Copper Rotor) Horizontal, Foot Mounted ....................................................................................................................2-21 GP100 .......................................................................................................................................................................2-22 NEMA Premium Ef ciency (Cast Iron Frame/Aluminum Rotor) Horizontal, Foot Mounted ....................................................................................................................2-23 C-Face, Horizontal, Footless ..................................................................................................................2-24 NEMA Premium Ef ciency Plus (Cast Iron Frame/Copper Rotor) Horizontal, Foot Mounted ....................................................................................................................2-26 C-Face, Horizontal, Footless ..................................................................................................................2-27 QuikMOD (GP Motors) ...............................................................................................................................................2-28 QuikMOD (RGZP Motors) ...........................................................................................................................................2-31 Custom Options (GP Motors) .....................................................................................................................................2-33

1-2 2009-2010 Low Voltage AC Motors Selection and Pricing Guide

Table of Contents

Introduction Table of Contents ....................................................................................................................................................... 1-1 Disclaimer .................................................................................................................................................................. 1-5 NEMA Motor Features at a Glance ............................................................................................................................... 1-6 IEC Motor Features at a Glance ................................................................................................................................. 1-10 Wide Selection of Motors .......................................................................................................................................... 1-12 Cancellation Charges & Change Notices .................................................................................................................... 1-13 Warranty Procedure .................................................................................................................................................. 1-14

General Purpose Motors GP10A ........................................................................................................................................................................2-1 High Ef ciency (Cast Aluminum Frame) Horizontal, Foot Mounted ......................................................................................................................2-2 C-Face, Horizontal, Foot Mounted ..........................................................................................................2-3 C-Face, Horizontal, Footless ....................................................................................................................2-5 GP10 ...........................................................................................................................................................................2-7 High Ef ciency (Cast Iron Frame) Horizontal, Foot Mounted ......................................................................................................................2-8 C-Face, Horizontal, Foot Mounted ........................................................................................................2-12 C-Face, Horizontal, Footless ..................................................................................................................2-13 RGZP .........................................................................................................................................................................2-15 High Ef ciency (Cast Iron Frame) Horizontal, Foot Mounted ....................................................................................................................2-16 GP100A .....................................................................................................................................................................2-18 NEMA Premium Ef ciency (Cast Aluminum Frame/Aluminum Rotor) Horizontal, Foot Mounted ....................................................................................................................2-19 NEMA Premium Ef ciency Plus (Cast Aluminum Frame/Copper Rotor) Horizontal, Foot Mounted ....................................................................................................................2-21 GP100 .......................................................................................................................................................................2-22 NEMA Premium Ef ciency (Cast Iron Frame/Aluminum Rotor) Horizontal, Foot Mounted ....................................................................................................................2-23 C-Face, Horizontal, Footless ..................................................................................................................2-24 NEMA Premium Ef ciency Plus (Cast Iron Frame/Copper Rotor) Horizontal, Foot Mounted ....................................................................................................................2-26 C-Face, Horizontal, Footless ..................................................................................................................2-27 QuikMOD (GP Motors) ...............................................................................................................................................2-28 QuikMOD (RGZP Motors) ...........................................................................................................................................2-31 Custom Options (GP Motors) .....................................................................................................................................2-33

Severe Duty Motors SD10 ...........................................................................................................................................................................3-1 High Ef ciency Horizontal, Foot Mounted ......................................................................................................................3-2 C-Face, Horizontal, Footless ....................................................................................................................3-8 RGZESD .....................................................................................................................................................................3-10


Table of Contents High Ef ciency Horizontal, Foot Mounted ....................................................................................................................3-11 SD10 MS ...................................................................................................................................................................3-15 High Ef ciency (1 Winding Variable Torque) Horizontal, Foot Mounted ....................................................................................................................3-16 SD100 .......................................................................................................................................................................3-18 NEMA Premium Ef ciency (Aluminum Rotor) Horizontal, Foot Mounted ....................................................................................................................3-19 C-Face, Horizontal, Footless ..................................................................................................................3-23 NEMA Premium Ef ciency Plus (Copper Rotor) Horizontal, Foot Mounted ................................................................................................................ 3-25 C-Face, Horizontal, Footless ............................................................................................................. 3-26 RGZEESD .............................................................................................................................................................. 3-27 NEMA Premium Ef ciency Horizontal, Foot Mounted ................................................................................................................ 3-28 SD100 IEEE841 .................................................................................................................................................... 3-33 NEMA Premium Ef ciency (Aluminum Rotor) Horizontal, Foot Mounted ................................................................................................................ 3-34 NEMA Premium Ef ciency Plus (Copper Rotor) Horizontal, Foot Mounted ................................................................................................................ 3-41 RGZEESDX ............................................................................................................................................................ 3-42 NEMA Premium Ef ciency Horizontal, Foot Mounted ................................................................................................................ 3-43 QuikMOD (SD Motors) .......................................................................................................................................... 3-48 QuikMOD (RGZ Motors) ........................................................................................................................................ 3-51 Custom Options (SD Motors) ................................................................................................................................ 3-54

Hazardous Duty RGZZESD ................................................................................................................................................................ 4-1 Class I, Group D, Class II, Groups F & G, Division 1 Horizontal, Foot Mounted .................................................................................................................. 4-2 C-Face, Vertical with Drip Cover, Footless ........................................................................................... 4-6 RGZZESD ID1 .......................................................................................................................................................... 4-7 Class I, Group D, Division 1 T2A, 1.15SF Horizontal, Foot Mounted .................................................................................................................. 4-8 C-Face, Vertical with Drip Cover, Footless ......................................................................................... 4-10 QuikMOD (XP Motors) .......................................................................................................................................... 4-11 Custom Options (XP Motors) ................................................................................................................................ 4-13

Inverter Duty RGZESDI ................................................................................................................................................................. 5-1 10:1 Constant Torque Horizontal, Foot Mounted .................................................................................................................. 5-2 RGKESDI & RGZESDI ................................................................................................................................................ 5-4 1000:1 Constant Torque Horizontal, Foot Mounted .................................................................................................................. 5-5 RGZZESDI ............................................................................................................................................................... 5-7 Class I, Group D, Class II, Groups F & G, Division 1 Horizontal, Foot Mounted .................................................................................................................. 5-8 QuikMOD (Inverter Duty) ...................................................................................................................................... 5-10


Table of Contents

Custom Options (Inverter Duty) ............................................................................................................................ 5-12

De nite PurposeVertical Solid Shaft Normal Thrust RGZVESD ................................................................................................................................................................ 6-1 RGZZVESD .............................................................................................................................................................. 6-4 Class I, Group D, Division 1 .......................................................................................................................... 6-5Vertical Solid Shaft In Line Thrust RGZVILESD ............................................................................................................................................................. 6-7 RGZZVILESD ........................................................................................................................................................... 6-9 Class I, Group D, Division 1 ........................................................................................................................ 6-10 QuikMOD (Vertical Motors) ................................................................................................................................... 6-11 Custom Options (Vertical Motors) ......................................................................................................................... 6-13

IEC Standard Motors 1LA7 ...................................................................................................................................................................... 7-1 Standard Ef ciency (Cast Aluminum Frame) B3 - Foot Mounted ............................................................................................................................. 7-2 B3 - Foot Mounted and PTC (A11) ...................................................................................................... 7-4 B5 - Flange, Footless (w/o canopy) ..................................................................................................... 7-6 B14 - Flange, Footless (w/o canopy) ................................................................................................... 7-8 1LA6 .................................................................................................................................................................... 7-10 Standard Ef ciency (Cast Iron Frame) B3 - Foot Mounted ........................................................................................................................... 7-11 1LA9 .................................................................................................................................................................... 7-12 High Ef ciency (Cast Aluminum Frame) B3 - Foot Mounted ........................................................................................................................... 7-13 B3 - Foot Mounted and PTC (A11) .................................................................................................... 7-14 B5 - Flange, Footless (w/o canopy) ................................................................................................... 7-15 B14 - Flange, Footless (w/o canopy) ................................................................................................. 7-16 1LG6 .................................................................................................................................................................... 7-17 High Ef ciency (Cast Iron Frame) B3 - Foot Mounted ........................................................................................................................... 7-18 B3 - Foot Mounted and PTC (A11) .................................................................................................... 7-19 Custom Options (IEC Standard Motors) ................................................................................................................. 7-20

IEC EX Motors ........................................................................................................................................................................ 7-24 1MJ6 Explosion Proof B3 - Foot Mounted ........................................................................................................................... 7-25 1MJ7 Explosion Proof B3 - Foot Mounted ........................................................................................................................... 7-27 Custom Options (IEC Explosion Proof Motors) ....................................................................................................... 7-28

QuikMOD Detail QuikMOD Introduction ........................................................................................................................................... 8-1 QuikMOD Overview ................................................................................................................................................ 8-4 QuikMOD Details .................................................................................................................................................... 8-8 Accessories .......................................................................................................................................................... 8-10


Table of Contents

Custom Options Detail Custom Options Introduction .................................................................................................................................. 9-1 Custom Options Overview ...................................................................................................................................... 9-2 Custom Options Details .......................................................................................................................................... 9-8

Typical Performance Data Technical Notes .................................................................................................................................................... 10-1 General Purpose & Severe Duty High Ef ciency GP10A / GP10 / SD10 ....................................................................................................................... 10-2 NEMA Premium Ef ciency (Aluminum Rotor) GP100A, GP100, SD100, SD100 IEEE841 ......................................................................................... 10-4 NEMA Premium Ef ciency Plus (Copper Rotor) GP100A, GP100, SD100, SD100 IEEE841 ......................................................................................... 10-6 Severe Duty Multi-Speed SD10 MS ................................................................................................................................................... 10-9 Hazardous & Inverter Duty RGZZESD, RGZZESD ID1, RGZZESDI .......................................................................................................... 10-10 Inverter Duty RGZESDI 10:1 Constant Torque ............................................................................................................. 10-14 RGKESDI & RGZESDI 1000:1 Constant Torque ........................................................................................ 10-16 De nite Purpose Vertical Motors RGZVESD, RGZVILESD .............................................................................................................................. 10-18 1LA7 400V 50Hz Data ...................................................................................................................................... 10-20 1LA6 400V 50Hz Data ...................................................................................................................................... 10-22 1LA9 400V 50Hz Data ...................................................................................................................................... 10-23 460V 60Hz Data ...................................................................................................................................... 10-24 1LG6 400V 50Hz Data ...................................................................................................................................... 10-25 460V 60Hz Data ...................................................................................................................................... 10-27 1MJ6 400V 50Hz Data ...................................................................................................................................... 10-28 1MJ7 400V 50Hz Data ...................................................................................................................................... 10-30Dimensions GP10A-GP100A 140-250 ...................................................................................................................................... 11-1 GP10 140-440 ...................................................................................................................................................... 11-4 GP100 140-250 .................................................................................................................................................. 11-10 SD10 140-S440 .................................................................................................................................................. 11-12 SD100 140-S440 ................................................................................................................................................ 11-18 SD100 IEEE841 280-S440................................................................................................................................... 11-24 RGZP-RGZESD-RGZZESD ...................................................................................................................................... 11-32 RGZ(Z)ESDI Fig A TEFC ..................................................................................................................................... 11-34 RGZESDI Fig B TEBC with and without Encoder ................................................................................................. 11-35 RGZESDI Fig C & D Lake Shore LS56 & Internally Mounted Encoder ................................................................... 11-36 RGZESDI Fig E Dynapar HS35 Encoder .............................................................................................................. 11-37 RGZESDI Fig F Lake Shore 8500 Externally Mounted Encoder ............................................................................ 11-38 RGZV(IL)ESD....................................................................................................................................................... 11-39 V-Belt Sheave Diagram ....................................................................................................................................... 11-40 Conduit Boxes .................................................................................................................................................... 11-41 1LA7 .................................................................................................................................................................. 11-48


Enclosure General Purpose - TEFC General Purpose - TEFC General Purpose - TEFC General Purpose - TEFC

Ef ciency High High NEMA Premium / NEMA Premium Plus

NEMA Premium / NEMA Premium Plus

Thrust N/A N/A N/A N/A

HP Range 1-20 1-200 1-20 1-20

Frame Size 140-250 140-440 140-250 140-250

Frequency 60 Hertz 60 Hertz 60 Hertz 60 Hertz

Power 3 - Phase 3 - Phase 3 - Phase 3 - Phase

Voltage 208-230/460 & 575 208-230/460 & 575 20HP20HP < 230/460, 575 75 lbs ) Motors > 75 lbs Cast in ( > 75 lbs) Motors > 75 lbs

Nameplate Aluminum - engraved Aluminum - engraved Aluminum - engraved Aluminum - engraved

Paint Epoxy enamelRAL7030 - Stone Gray

Epoxy enamelRAL7030 - Stone Gray



Vibration 0.15 IPS 0.15 IPS 0.15 IPS 0.15 IPS

Siemens NEMA Three Phase Integral Horse Power MotorsFeatures at a Glance

General Purpose Motors

GP10ASee Page 2-1

GP10See Page 2-7

GP100ASee Page 2-18

GP100See Page 2-22

Mec

han

ical

Dat

aEl

ectr

ical

Dat

a

PalaOXText BoxDouble Shielded

PalaOXText BoxDouble Shielded


Severe Duty - TEFC Severe Duty - TEFC Severe Duty / IEEE 841 (2001) - TEFC

High NEMA Premium / NEMA Premium Plus NEMA Premium / NEMA Premium Plus

N/A N/A N/A

1-400 1-400 1-400

140-S440 140-S440 140-S440

60 Hertz 60 Hertz 60 Hertz

3 - Phase 3 - Phase 3 - Phase

208-230/460 & 575 20HP20HP < 230/460, 575 75 lbs Motors > 75 lbs

Stainless steel - engraved Stainless steel - engraved Stainless steel - embossed




0.08 IPS (2, 4, 6 pole)0.06 IPS (8 pole)

0.08 IPS 0.06 IPS

Severe Duty

SD10See Page 3-1

SD100See Page 3-18

SD100 IEEE 841See Page 3-33


Siemens 3AC Integral Horse Power MotorsFeatures at a Glance

Hazardous Duty

RGZZESDSee Page 4-1

RGZZESD 1D1See Page 4-7

Enclosure Hazardous Duty - TEFC Hazardous Duty - TEFC

Ef ciency High High

Thrust N/A N/A

HP Range 1-300 1-400

Frame Size 140-440 140-S440

Frequency 60 Hertz 60 Hertz

Power 3 - Phase 3 - Phase

Voltage 230/460 460 only 25HP and above

460

Service Factor (sine wave) 1.0 1.15 (sine wave), 1.0 (VFD)

Electrical Design NEMA design B NEMA design B (except for derates)

Stator Windings Copper - Random Wound Copper - Random Wound

Insulation Class FMeets NEMA MG1-2006, Part 31

Class FMeets NEMA MG1-2006, Part 31

Temperature Rise (sine wave)

Class B @ 1.0SF & Class F @ 1.15SF


Warranty 3 Years 3 Years

Frame Cast Iron Cast Iron

End Shields Cast Iron Cast Iron

Conduit Box Cast Iron Cast Iron

Lead Seal Gasket Neoprene

Fan Cover Cast Iron Cast Iron

Cooling Fan Bi-directional, Polypropylene Bi-directional, Polypropylene

Drip Cover N/A N/A

Rotor Die Cast Aluminum Die Cast Aluminum

Shaft High Strength Carbon Steel (C1045) High Strength Carbon Steel (C1045)

Bearing Type Single Shielded Single Shielded

Bearing Inner Cap Stationary Bearing Caps Stationary Bearing Caps

Shaft Seal / Slinger 140-250 Shaft Seal DE 280-440 V-Ring Slinger DE

140-250 Shaft Seal DE 280-440 V-Ring Slinger DE

Lubrication Polyurea Polyurea

Lube Inlet Fittings Alemite Alemite

Lube Relief Fittings Plug Plug

Condensation Drain 400-440 Only T-Drain

Hardware Zinc Plated Zinc Plated

Lifting Eyebolt 140-180 Provisions 210-440 Included

140-180 Provisions 210-440 Included

Nameplate Stainless Steel - Engraved Stainless Steel - Engraved

Paint Epoxy EnamelRAL7030 - Stone Gray

Epoxy EnamelRAL7030 - Stone Gray

Vibration 0.08 IPS 0.06 IPS

Mec

han

ical

Dat

aEl

ectr

ical

Dat

aM

ech

anic

al D

ata

Elec

tric

al D

ata


Inverter Duty De nite Purpose - Vertical Motors

RGZESDISee Pages 5-1. 5-4

RGZZESDISee Page 5-7

RGZVESDSee Page 6-1

RGZVILESDSee Page 6-9

Severe / Inverter Duty - TEFC Hazardous / Inverter Duty - TEFC Severe Duty - TEFC Severe Duty - TEFC

High High High High

N/A N/A Normal In-Line

1-400 1-200 1-250 3-250

140-S440 140-440 140-440 180-440

60 Hertz 60 Hertz 60 Hertz 60 Hertz

3 - Phase 3 - Phase 3 - Phase 3 - Phase

460 460 230/460 230/460

1.15 (sine wave), 1.0 (VFD) 1.0 1.15 1.15

NEMA design B (except for derates)

NEMA design B (except for derates)

NEMA design B NEMA design B

Copper - Random Wound Copper - Random Wound Copper - Random Wound Copper - Random Wound






Class B @ 1.0SF Class B @ 1.05F, Class F @ 1.15SF Class B @ 1.0SF, Class F @ 1.15SF

3 Years 3 Years 3 Years 3 Years

Cast Iron Cast Iron Cast iron Cast iron



Neoprene Neoprene Neoprene


Bi-directional, Polypropylene Bi-directional, Polypropylene Bi-directional - polypropylene Bi-directional - polypropylene

N/A N/A Steel Cast Iron

Die Cast Aluminum Die Cast Aluminum Die cast aluminum Die cast copper

High Strength Carbon Steel (C1045) High Strength Carbon Steel (C1045)

High strength carbon steel (C1045) High strength carbon steel (C1045)

Single Shielded Single Shielded DE: 140-250 / ODE: 140-360 - OpenDE: 280-360 Single ShieldedDE & NDE: 400 Double ShieldedDE: 440 Open / ODE: Single Shielded

DE: 180-250 Open 280-440 Double ShieldedNDE: 180-440 Duplex angular contact Thrust bearing

Stationary Bearing Caps Stationary Bearing Caps Stationary Bearing Caps Stationary Bearing Caps



140-250 Shaftt Seal280-360 None400-440 V-Ring Slinger

V-ring slinger - DE and ODE

Polyurea Polyurea Polyurea Polyurea

Alemite Alemite Alemite Alemite

Plug Plug Plug Plug

T-Drain 400-440 Only T - drains T-drains

Zinc Plated Zinc Plated Zinc plated Zinc plated



140-440 Included 180-440 Included

Stainless Steel - Engraved Stainless Steel - Engraved Stainless Steel - Engraved Stainless Steel - Engraved





0.06 IPS 0.06 IPS 0.08 IPS 0.08 IPS


Siemens IEC MotorsFeatures at a Glance

IEC Motors

Enclosure TEFC TEFC

Ef ciency eff2 eff2

HP / kW Range 60Hz: 0.07 - 21.3 kW50Hz: 0.12 - 18.5 kW

60Hz: 0.86 - 21.3 kW50Hz: 0.75 - 18.5

Frame Size 56 -160 100-160

Frequency 50 and 60 Hertz 50 Hertz

Power 3 - Phase 3 - Phase

Voltage 230/400 @ 50 Hertz,460V @ 60 Hertz

230/400

Service Factor (sine wave) Stock 1.1 1.0

Electrical Design Design N Design N

Stator Windings Copper - Random Wound Copper - Random Wound

Insulation Class F Class F

Temperature Rise Class B @ 1.0SF,Class F @ 1.1SF

Class B @ 1.0SF,Class F @ 1.1SF

Warranty 12/18 month 12/18 month

Frame Cast Aluminum Cast Iron

Endshields Cast Aluminum Cast Iron

Conduit Box Aluminum Alloy Cast Iron

Lead Seal Gasket Neoprene Neoprene

Fan Cover Corrosion Protected Steel Plate Corrosion Protected Steel Plate

Cooling Fan Plastic Plastic

Rotor Die Cast Aluminum Die Cast Aluminum

Bearing Type Double Shielded Double Shielded

Protection Design IP55 IP55

Lubrication Lithium Lithium

Lube Inlet Fittings Sealed Bearings Sealed Bearings

Condensation Drain Optional Optional

Hardware Zinc Plated Zinc Plated

Lifting Eyebolt 30 kg and above 30 kg and above

Nameplate Stainless Steel Stainless Steel

Paint RAL 7030 World wide nish RAL 7030 World wide nish

VibrationAcc. to DIN EN 60034-14

Vibration Grade A Vibration Grade A

Mec

han

ical

Dat

aEl

ectr

ical

Dat

a

1LA7See Page 7-1

1LA6See Page 7-10


TEFC TEFC TEFC

eff1 eff1 eff2

60Hz: 1/6 - 25 HP50Hz: 0.16 - 18.5 kW

60Hz: 25-300 HP50Hz: 18.5 - 250kW

60Hz: 0.10 -152kW50Hz: 0.37 -132kW

56-160 180-315 71-315

50 and 60 Hertz 50 and 60 Hertz 50 Hertz

3 - Phase 3 - Phase 3 - Phase

230/400 @ 50 Hertz,460V @ 60 Hertz

230/400 @ 50 Hertz,460V @ 60 Hertz

230/400

Stock 1.15 Stock 1.15 1.0

Design N Design N Design N

Copper - Random Wound Copper - Random Wound Copper - Random Wound

Class F Class F Class F



Class B @ 1.0SF

12/18 month 12/18 month 12/18 month

Cast Aluminum Cast Iron Cast Iron

Cast Aluminum Cast Iron Cast Iron

Aluminum 180-225, Aluminum Alloy250-315, Cast Iron

71-132, 180-225 Aluminum Alloy160, 250-315, Cast Iron

Neoprene Neoprene Neoprene

Corrosion Protected Steel Plate Glass Reinforced Plastic Corrosion Protected Steel Plate

Plastic Plastic 71-315: Plastic

Die Cast Aluminum Die Cast Aluminum Die Cast Aluminum

180-250: Single Shielded280-315: Regreasable

Double Shielded 71-80: Single Shielded90-250: Shielded280-315: Regreasable

IP55 IP55 IP55

Lithium Lithium Lithium

Sealed Bearings Up To 250: Sealed Bearings280 and above: Flat Type Nipple

Up To 250: Sealed Bearings280 and above: Flat Type Nipple

Optional Standard Not Permitted

Zinc Plated Zinc Plated Zinc Plated

30 kg and above 30 kg and above 30 kg and above

Stainless Steel Stainless Steel Aluminum

RAL 7030 World wide nish RAL 7030 Standard nish 71- 200: RAL 7030 World wide nish225-315:RAL 7030 Standard nish

Vibration Grade A Vibration Grade A Vibration Grade A

1LA9See Page 7-12

1LG6See Page 7-17

1MJSee Page 7-24


Wide Selection of Motors

Wide Selection

Providing value also means having the right motor for the job. At Siemens, we offer hundreds of motor types, sizes, ratings and modi cations. And, as you read these words, we are adding to this list as part of our commitment to become your single source for motors.

The Right Ef ciency for Your Application

To meet your cost of ownership and motor management needs, Siemens offers several levels of energy ef ciency in many of its motors: High NEMA Premium NEMA Premium Plus

The World's Most Energy Ef cient Line of Motors

Lower your energy costs today with the world's most energy ef cient line of motors. New regulatory standards and rising energy costs create increasing pressure to maximize energy ef ciency and reduce your carbon footprint. Siemens breakthrough copper-rotor motors have set new standards for ef ciency. Adding copper to the stator windings, Siemens has developed motors that can withstand the heat. Two-thirds of an AC induction motor's electrical loss occurs in the stator. The addition of the copper rotorreduces wasteful, resistive heating. Copper's volumetric electricalconductivity is approximately 66% higher than aluminum.

Total Customer Support

When youre looking for a motor, look for a highly trained specialist to help you match the right motor to your speci c needs. Siemens sales engineers share the knowledge, training and experience to help you solve performance or installation challenges to ensure that you will receive the best value for your investment. Our customer service center takes pride in putting our customers rst. Whether its an expedited shipment, tracking your order, or making sure your motor is properly installed, these professionals wont be satis ed until you are.

Availability

Siemens has hundreds of distributor stocking locations throughout North America with a wide selection of NEMA and IEC frame sizes and ratings. Motors are available same day from a local source you can trust.

Iron-Clad Quality

The quality of our motors begins with the design experience we have gained through more than 100 years of manufacturing and applying motors. We build on this experience every day with new designs that incorporate the latest materials and techniques to provide even higher levels of performance, operating ef ciency and reliability.

These advanced motor designs are manufactured in a state-of-the-art ISO 9001 certi ed facility. Here, our manufacturing technicians subject each motor to more than 100 separate quality inspections before it leaves our plant. . .and before it is good enough to be offered to you. These distributors are supported by multiple stocking centers and our customer service centers in Little Rockland Cincinnati. Need something special? Our modi cation centers have complete motor modi cation capabilities to help you get the exact motor you need, when you need it.

Intr

od

uct

ion

Gen

eral

Pu

rpo

se M

oto

rsSe

vere

Du

ty

Mo

tors

Haz

ard

ou

s D

uty

Mo

tors

Inve

rter

D

uty

Mo

tors

De

nit

e Pu

rpo

se M

oto

rsIE

C M

etri

c M

oto

rsQ

uik

MO

D

Det

ail

Cu

sto

m

Op

tio

ns

Det

ail

Typ

ical

Pe

rfo

rman

ce

Dat

a

Dim

ensi

on

sPa

rt N

um

ber

In

dex


Cancellation Charges & Change Notices

Cancellation Charges

Note: A minimum charge of $100 will be assessed for any order cancellation for modi ed or custom motors.

Stock Motors

No charges will be incurred if an order is cancelled prior to shipment.

A stock motor is returnable (freight paid by purchaser) immediately after shipment if returned in new condition (original, undamaged packaging) for a minimum restocking charge of 20% of the motor net price.

Non-Stock Motors

For non-stock motors, the following graph will apply to determine cancellation charges after the order is received and entered at the factory. Completion progress will be determined by a Siemens Customer Service Representative.

A charge of 15% of the total net motor price will be assessed if an order is cancelled after it has been released for engineering and drafting whether or not the drawings have been completed and/or submitted for approval.

Change Notice

All change notices applied to in-process orders logged into the Siemens customer service department and requiring a product change will be subject to a $100 net charge plus the applicable modi cation adder. Delivery dates will be adjusted according to the type of change/modi cation requested. This policy does not pertain to commercial changes such as ship to or bill to addresses.

Intro

du

ction

Gen

eral Pu

rpo

se Mo

tors

Severe Du

ty M

oto

rsH

azardo

us

Du

ty Mo

tors

Inverter

Du

ty Mo

tors

De n

ite Pu

rpo

se Mo

tors

IEC M

etric M

oto

rsQ

uikM

OD

D

etailC

usto

m

Op

tion

s Detail

Typical

Perform

ance

Data

Dim

ensio

ns

Part Nu

mb

er In

dex


Warranty Procedure

Standard Terms & Conditions of Sale

Warranty - Company warrants that on the date of shipment to purchaser the goods will be of the kind and quality described herein, merchantable, and free of defects in workmanship and material.

If within one year from date of operation, but not more than eighteen months from date of shipment by Company, of any item of the goods, purchaser discovers that such item was not as warranted above and promptly noti es company in written thereof, Company shall remedy such defect by, at Companys option, adjustment, repair, or replacement of the item and any affected part of the goods. Purchaser shall assume all responsibility and expense for removal, reinstallation and freight in connection with the foregoing remedy. The same obligations and conditions shall extend to replacement items furnished by company here under. Company shall have the right of disposal of items replaced by it. Purchaser shall grant Company to determine any defect in the goods. In the event that adjustment, repair or replacement does not remedy the defect, the Company and Purchaser shall negotiate in good faith an equitable adjustment in the contract price.

(Service calls and overtime are not covered under Siemens warranty policy).

The Companys responsibility does not extend to any item of the goods which has not been manufactured and sold by Company. Such item shall be covered only by express warranty, if any, of the manufacture thereof. The Company and its suppliers shall also have no responsibility if the goods have been improperly stored, handled, or installed or if the goods have not been operated or maintained according to their ratings or according to instructions in Company or supplier furnished manuals, or if unauthorized repairs or modi cations have been made to the goods.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES (EXCEPT TITLE), INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, AND CONSTITUTES THE ONLY WARRANTY OF COMPANY WITH RESPECT TO THE GOODS.

The foregoing states Purchasers exclusive remedy against Company and its suppliers for any defect in the goods or for failure of the goods to be as warranted, whether Purchasers remedy is based on contract, warranty, failure of such remedy to achieve its essential purpose, tort (including negligence), indemnity or any other legal theory, and whether arising out of warranties, representations, instructions, installations or defects from any cause.

Warranty Type Initial Operation

A. 1 Year Standard Warranty

18 Months RG, RGE, RGE1, RGZP, RGZPSD, RGZAD, RGZE Single Phase Motors GP10A, GP10, GP100A, GP100,

After shipment from manufacturer

3 Years ESD only, RGZESD, RGZVILESD, RGZZESD, RGZEESD,

HSRGZVESD, SD10, SD100


5 Years RGZESDX , RGZEESDX, SD100 IEEE841


B. Remedy Siemens Options RepairReplace

C. Purchaser's ResponsibilityTransportation Damage ClaimsRemovalFreightInstallation

D. Speci cally Excludes Improper StorageIn & Out Costs Transportation Damage

E. Shipment (Normal) FOB our dockFreight Allowed

Intr

od

uct

ion

Gen

eral

Pu

rpo

se M

oto

rsSe

vere

Du

ty

Mo

tors

Haz

ard

ou

s D

uty

Mo

tors

Inve

rter

D

uty

Mo

tors

De

nit

e Pu

rpo

se M

oto

rsIE

C M

etri

c M

oto

rsQ

uik

MO

D

Det

ail

Cu

sto

m

Op

tio

ns

Det

ail

Typ

ical

Pe

rfo

rman

ce

Dat

a

Dim

ensi

on

sPa

rt N

um

ber

In

dex


Warranty Procedure

REFERENCE NOTES

1. After the inspection, contact Little Rock Plant for authorization of repair or replacement. Unapproved repairs will be denied.

2. Removal, reinstallation, freight and service calls are NOT covered by warranty.

3. A standard EASE Warranty report must be lled out and a Siemens job/p.o. # issued. The Warranty report and nameplate (if motor scrapped in the eld) plus the invoice must be sent to the Little Rock Plant.

4. Premium ef ciency motors will modify major repair pricing by increasing schedule 10%.

5. Allowances listed are for open drip-proof and totally enclosed, non-ventilated motors with class B or F insulation and all voltages between 100 and 600 volts. For variations consult factory.

6. Minor repairs-consist of all the operations listed under minor repairs plus the cost of material and rewinding of stator. If no allowance is shown, consult the factory.

7. Major repairs-consist of all the operations listed under major repairs plus the cost of material and rewinding of stator. If no allowance is shown, consult the factory.

8. Shaded areas represent units that will be replaced when possible, without repairs.

9. Replacement Parts-will be furnished at no Charge from the factory, i.e. bearings for 40 HP and above.

10. Replacement Motors-will be furnished at no Charge from the factory. Should it be necessary for reasons of expediency for the service shop to replace a motor from their stock, a replacement motor will be furnished at no Charge from the factory, shipped Freight allowed.

11. Defective parts, i.e. bearings, are subject to return upon request to the factory for inspection and approval for reimbursement.

DATE CODING

Siemens motors are date coded by the model number/date code/serial number on the nameplate.Siemens date codes for NEMA frame size, low voltage motors built in USA and Mexico is as follows:

The rst digit is alphabetic and represents the month. The second and third digits are numeric and are the last two digits of the year.

A = January G = JulyB = February H = AugustC = March J = SeptemberD = April K = OctoberE = May L = NovemberF = June M = December

Intro

du

ction

Gen

eral Pu

rpo

se Mo

tors

Severe Du

ty M

oto

rsH

azardo

us

Du

ty Mo

tors

Inverter

Du

ty Mo

tors

De n

ite Pu

rpo

se Mo

tors

IEC M

etric M

oto

rsQ

uikM

OD

D

etailC

usto

m

Op

tion

s Detail

Typical

Perform

ance

Data

Dim

ensio

ns

Part Nu

mb

er In

dex


Siemens

POWER CONVERSION DIVISIONNEMA MOTORS

1ST call To SEA salesman or sales of ce by OEM, Distributor or the End user. The following information must be supplied at this time:

1. Sales order number2. Model or order number from the nameplate of the motor3. Serial number or date code4. Complete nameplate data5. Application (blower, compressor, conveyor etc)6. Nature of problem (electrical, mechanical etc)

2nd call By SEA salesman or sales of ce by OEM, Distributor or the End user.To Siemens Warranty Administrator.

Contact numbers:Phone number 501 897 1344 Fax number 678 297 8242Email [email protected]

Warranty Adminstrator will direct to the nearest recommended Siemens authorized service center.

3rd call To the recommended Siemens authorized service center. Will direct analyzing of failure / evaluationof problem. If the problem is a manufactures defect, the Siemens Warranty Administrator Will make a determination on what the next step will be. Example ( repair or replace)

4th call To Siemens customer to update the customer on the action taken by Siemens

Vaughn Watkins Warranty Administrator Siemens Energy and Automation Power Conversion Division Little Rock, Ar. 72206 Tel: 501 897 1344 Fax: 678 297 8242 email: [email protected]

IMPORTANT NOTICE

MAIL INVOICE PLUS PROPER WARRANTY REPAIR REPORT TO THE WARRANTY ADMINISTRATOR. IF SIEMENS IS TO BE BILLED FOR OVERTIME, AUTHORIZATION MUST BE OBTAINED FROM WARRANTY ADMINISTRATOR BEFORE OVERTIME WORK IS PERFORMED. MATERIAL AND SERVICES ARE PURCHASED FOR RESALE AND ARE EXEMPT FROM STATE AND LOCAL SALES AND USE TAX.

Frames143-449

Siemens Energy and Automation MOTOR SERVICE PROGRAMPower Conversion Division SUBJECT TO CHANGE WITHOUT NOTICE!14000 Dineen DriveLittle Rock, Ar. 72206 Tel: 501 897 1344 Fax: 678 297 8242

Intr

od

uct

ion

Gen

eral

Pu

rpo

se M

oto

rsSe

vere

Du

ty

Mo

tors

Haz

ard

ou

s D

uty

Mo

tors

Inve

rter

D

uty

Mo

tors

De

nit

e Pu

rpo

se M

oto

rsIE

C M

etri

c M

oto

rsQ

uik

MO

D

Det

ail

Cu

sto

m

Op

tio

ns

Det

ail

Typ

ical

Pe

rfo

rman

ce

Dat

a

Dim

ensi

on

sPa

rt N

um

ber

In

dex


General Purpose - TEFC MotorsGP10A - (Cast Aluminum Frame) High Ef ciency

GP10A series of TEFC motors is ideal for material handling, pump, fan, compressor and other general purpose industrial applications.

Performance Speci cations 1 to 20 HP

1.15 service factor, 40C ambient

3600, 1800, 1200 or 900 RPM

3 phase, 60 Hz; 208-230/460 and 575 volt operation

Meets or exceeds EPAct ef ciency standards

Class F insulation, Class B temperature rise @ 1.0SF

NEMA Design B, Continuous Duty 143T through 256T frame

Features for Long LifeFrame & Bearing Housings Die cast aluminum construction for exceptional heat dissipation and structural integrity. Equipped with bolt-on feet for mounting exibility. Condensation drain holes provided. Integrally cast lifting eyes. Unique frame n design maximizes cooling.

Rotor A unique rotor design provides improved ef ciency. Large cross section bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance.

Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved ef ciencies. A unique stator core design lowers ux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses.

Insulation Proprietary, inverter-rated, NEMA Class F, non-hygroscopic, insulation system with Class B temperature rise @ 1.0 SF, provides an extra margin of thermal life. Varnish system application ensures maximum ire penetration to provide protection from moisture, corrosion and electrical surges. This insulation system meets or exceeds NEMA MG1-2006, Part 31 making all motors suitable for operation with adjustable frequency drives.

Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its low-inertia design reduces windage losses, improves air ow, reduces noise and provides dependable cooling. Polycarbonate fan covers are provided on all frame sizes.

Bearings Lubricated for life, oversized, complete with external bearing protection.

Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases.

Oversized Conduit Box Cast aluminum construction that is larger than industry standards, diagonally-split and rotatable in 90 increments for quick and easy connections. A ground lug is included. Non-wicking, clearly and permanently marked leads.

Corrosion Resistance Die cast aluminum construction, polycarbonate fan and fan cover, zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist corrosion.

Modi able Siemens GP10A motors are available with a variety of QuikMOD modi cations and kits.

Speci cations table begins on the next page J

Intro

du

ction

Gen

eral Pu

rpo

se Mo

tors

Severe Du

ty M

oto

rsH

azardo

us

Du

ty Mo

tors

Inverter

Du

ty Mo

tors

De n

ite Pu

rpo

se Mo

tors

IEC M

etric M

oto

rsQ

uikM

OD

D

etailC

usto

m

Op

tion

s Detail

Typical

Perform

ance

Data

Dim

ensio

ns

Part Nu

mb

er In

dex



HP RPM Frame Voltage TypeDE

Bearing Part NumberList

Price $Mult. Sym.

FL Amps*

FL Nom. Eff. (%)

Weight (lbs)

Stock Model

Horizontal, Foot Mounted

1 3600 143T 208-230/460 GP10A Ball 1LE21011AA114AA3 280 GPA1 1.4 80 32 1 3600 143T 575 GP10A Ball 1LE21011AA113AA3 280 GPA1 1.12 80 32 1 1800 143T 208-230/460 GP10A Ball 1LE21011AB214AA3 280 GPA1 1.5 82.5 34 1 1800 143T 575 GP10A Ball 1LE21011AB213AA3 280 GPA1 1.2 82.5 34 1 1200 145T 208-230/460 GP10A Ball 1LE21011AC314AA3 350 GPA1 1.6 80 35 1 1200 145T 575 GP10A Ball 1LE21011AC313AA3 350 GPA1 1.28 80 35 1 900 182T 208-230/460 GP10A Ball 1LE21011CD114AA3 547 GPA1 2.1 74 57 1 900 182T 575 GP10A Ball 1LE21011CD113AA3 547 GPA1 1.64 74 57

1.5 3600 143T 208-230/460 GP10A Ball 1LE21011AA214AA3 288 GPA1 2 82.5 33 1.5 3600 143T 575 GP10A Ball 1LE21011AA213AA3 288 GPA1 1.6 82.5 33 1.5 1800 145T 208-230/460 GP10A Ball 1LE21011AB314AA3 310 GPA1 2.2 84 38 1.5 1800 145T 575 GP10A Ball 1LE21011AB313AA3 310 GPA1 1.76 84 38 1.5 1200 182T 208-230/460 GP10A Ball 1LE21011CC114AA3 373 GPA1 2.4 85.5 54 1.5 1200 182T 575 GP10A Ball 1LE21011CC113AA3 373 GPA1 1.92 85.5 54 1.5 900 184T 208-230/460 GP10A Ball 1LE21011CD314AA3 593 GPA1 3 77 71 1.5 900 184T 575 GP10A Ball 1LE21011CD313AA3 593 GPA1 2.4 77 71 2 3600 145T 208-230/460 GP10A Ball 1LE21011AA314AA3 335 GPA1 2.6 84 35 2 3600 145T 575 GP10A Ball 1LE21011AA313AA3 335 GPA1 2.08 84 35 2 1800 145T 208-230/460 GP10A Ball 1LE21011AB414AA3 336 GPA1 3 84 40 2 1800 145T 575 GP10A Ball 1LE21011AB413AA3 336 GPA1 2.4 84 40 2 1200 184T 208-230/460 GP10A Ball 1LE21011CC314AA3 413 GPA1 3.1 86.5 65 2 1200 184T 575 GP10A Ball 1LE21011CC313AA3 413 GPA1 2.48 86.5 65 2 900 213T 208-230/460 GP10A Ball 1LE21012AD114AA3 683 GPA1 3.3 82.5 75 2 900 213T 575 GP10A Ball 1LE21012AD113AA3 683 GPA1 2.64 82.5 75 3 3600 182T 208-230/460 GP10A Ball 1LE21011CA114AA3 373 GPA1 3.7 85.5 56 3 3600 182T 575 GP10A Ball 1LE21011CA113AA3 373 GPA1 2.96 85.5 56 3 1800 182T 208-230/460 GP10A Ball 1LE21011CB114AA3 385 GPA1 4 87.5 59 3 1800 182T 575 GP10A Ball 1LE21011CB113AA3 385 GPA1 3.2 87.5 59 3 1200 213T 208-230/460 GP10A Ball 1LE21012AC114AA3 530 GPA1 4 87.5 85 3 1200 213T 575 GP10A Ball 1LE21012AC113AA3 530 GPA1 3.36 87.5 85 3 900 215T 208-230/460 GP10A Ball 1LE21012AD214AA3 978 GPA1 4.8 84 89 3 900 215T 575 GP10A Ball 1LE21012AD213AA3 978 GPA1 3.84 84 89 5 3600 184T 208-230/460 GP10A Ball 1LE21011CA314AA3 486 GPA1 6.2 87.5 62 5 3600 184T 575 GP10A Ball 1LE21011CA313AA3 486 GPA1 4.96 87.5 62 5 1800 184T 208-230/460 GP10A Ball 1LE21011CB314AA3 440 GPA1 6.7 87.5 66 5 1800 184T 575 GP10A Ball 1LE21011CB313AA3 440 GPA1 5.36 87.5 66 5 1200 215T 208-230/460 GP10A Ball 1LE21012AC214AA3 791 GPA1 6.8 87.5 100 5 1200 215T 575 GP10A Ball 1LE21012AC213AA3 791 GPA1 5.44 87.5 100 5 900 254T 208-230/460 GP10A Ball 1LE21012BD114AA3 1362 GPA1 8.8 85.5 157 5 900 254T 575 GP10A Ball 1LE21012BD113AA3 1362 GPA1 7.04 85.5 157

DOE#CC032A

Prices and speci cations are subject to change without noticeStock availability subject to saleQuikMOD delivery for stocked motors only*FL Amps at 460V or 575V

Intr

od

uct

ion

Gen

eral

Pu

rpo

se M

oto

rsSe

vere

Du

ty

Mo

tors

Haz

ard

ou

s D

uty

Mo

tors

Inve

rter

D

uty

Mo

tors

De

nit

e Pu

rpo

se M

oto

rsIE

C M

etri

c M

oto

rsQ

uik

MO

D

Det

ail

Cu

sto

m

Op

tio

ns

Det

ail

Typ

ical

Pe

rfo

rman

ce

Dat

a

Dim

ensi

on

sPa

rt N

um

ber

In

dex





Price $Mult. Sym.

FL Amps*

FL Nom. Eff. (%)

Weight (lbs)

Stock Model

Horizontal, Foot Mounted - continued

7.5 3600 213T 208-230/460 GP10A Ball 1LE21012AA114AA3 635 GPA1 9 88.5 96 7.5 3600 213T 575 GP10A Ball 1LE21012AA113AA3 635 GPA1 7.2 88.5 96 7.5 1800 213T 208-230/460 GP10A Ball 1LE21012AB114AA3 615 GPA1 9.5 89.5 102 7.5 1800 213T 575 GP10A Ball 1LE21012AB113AA3 615 GPA1 7.6 89.5 102 7.5 1200 254T 208-230/460 GP10A Ball 1LE21012BC114AA3 1010 GPA1 10.5 89.5 163 7.5 1200 254T 575 GP10A Ball 1LE21012BC113AA3 1010 GPA1 8.4 89.5 163 7.5 900 256T 208-230/460 GP10A Ball 1LE21012BD214AA3 1422 GPA1 13 85.5 189 7.5 900 256T 575 GP10A Ball 1LE21012BD213AA3 1422 GPA1 10.4 85.5 189 10 3600 215T 208-230/460 GP10A Ball 1LE21012AA214AA3 749 GPA1 11.5 89.5 113 10 3600 215T 575 GP10A Ball 1LE21012AA213AA3 749 GPA1 9.2 89.5 113 10 1800 215T 208-230/460 GP10A Ball 1LE21012AB214AA3 749 GPA1 12.5 89.5 114 10 1800 215T 575 GP10A Ball 1LE21012AB213AA3 749 GPA1 10 89.5 114 10 1200 256T 208-230/460 GP10A Ball 1LE21012BC214AA3 1187 GPA1 13.5 89.5 175 10 1200 256T 575 GP10A Ball 1LE21012BC213AA3 1187 GPA1 10.8 89.5 175 15 3600 254T 208-230/460 GP10A Ball 1LE21012BA114AA3 979 GPA1 18 90.2 168 15 3600 254T 575 GP10A Ball 1LE21012BA113AA3 979 GPA1 14.4 90.2 168 15 1800 254T 208-230/460 GP10A Ball 1LE21012BB114AA3 956 GPA1 19 91 166 15 1800 254T 575 GP10A Ball 1LE21012BB113AA3 956 GPA1 15.2 91 166 20 3600 256T 208-230/460 GP10A Ball 1LE21012BA214AA3 1211 GPA1 23.5 90.2 179 20 3600 256T 575 GP10A Ball 1LE21012BA213AA3 1211 GPA1 18.8 90.2 179 20 1800 256T 208-230/460 GP10A Ball 1LE21012BB214AA3 1150 GPA1 25 91 185 20 1800 256T 575 GP10A Ball 1LE21012BB213AA3 1150 GPA1 20 91 185

C-Face, Horizontal, Foot Mounted

1 3600 143TC 208-230/460 GP10A Ball 1LE21011AA114EA3 342 GPA1 1.4 80 32 1 3600 143TC 575 GP10A Ball 1LE21011AA113EA3 342 GPA1 1.12 80 32

1 1800 143TC 208-230/460 GP10A Ball 1LE21011AB214EA3 342 GPA1 1.5 82.5 34 1 1800 143TC 575 GP10A Ball 1LE21011AB213EA3 342 GPA1 1.2 82.5 34

1 1200 145TC 208-230/460 GP10A Ball 1LE21011AC314EA3 411 GPA1 1.6 80 35 1 1200 145TC 575 GP10A Ball 1LE21011AC313EA3 411 GPA1 1.28 80 35

1 900 182TC 208-230/460 GP10A Ball 1LE21011CD114EA3 634 GPA1 2.1 74 57 1 900 182TC 575 GP10A Ball 1LE21011CD113EA3 634 GPA1 1.64 74 57

1.5 3600 143TC 208-230/460 GP10A Ball 1LE21011AA214EA3 349 GPA1 2 82.5 33 1.5 3600 143TC 575 GP10A Ball 1LE21011AA213EA3 349 GPA1 1.6 82.5 33

1.5 1800 145TC 208-230/460 GP10A Ball 1LE21011AB314EA3 371 GPA1 2.2 84 38 1.5 1800 145TC 575 GP10A Ball 1LE21011AB313EA3 371 GPA1 1.76 84 38

1.5 1200 182TC 208-230/460 GP10A Ball 1LE21011CC114EA3 461 GPA1 2.4 85.5 54 1.5 1200 182TC 575 GP10A Ball 1LE21011CC113EA3 461 GPA1 1.92 85.5 54

1.5 900 184TC 208-230/460 GP10A Ball 1LE21011CD314EA3 680 GPA1 3 77 71 1.5 900 184TC 575 GP10A Ball 1LE21011CD313EA3 680 GPA1 2.4 77 71

DOE#CC032A


Intro

du

ction

Gen

eral Pu

rpo

se Mo

tors

Severe Du

ty M

oto

rsH

azardo

us

Du

ty Mo

tors

Inverter

Du

ty Mo

tors

De n

ite Pu

rpo

se Mo

tors

IEC M

etric M

oto

rsQ

uikM

OD

D

etailC

usto

m

Op

tion

s Detail

Typical

Perform

ance

Data

Dim

ensio

ns

Part Nu

mb

er In

dex





Price $Mult. Sym.

FL Amps*

FL Nom. Eff. (%)

Weight (lbs)

Stock Model

C-Face, Horizontal, Foot Mounted - continued

2 3600 145TC 208-230/460 GP10A Ball 1LE21011AA314EA3 396 GPA1 2.6 84 35 2 3600 145TC 575 GP10A Ball 1LE21011AA313EA3 396 GPA1 2.08 84 35

2 1800 145TC 208-230/460 GP10A Ball 1LE21011AB414EA3 397 GPA1 3 84 40 2 1800 145TC 575 GP10A Ball 1LE21011AB413EA3 397 GPA1 2.4 84 40

2 1200 184TC 208-230/460 GP10A Ball 1LE21011CC314EA3 500 GPA1 3.1 86.5 65 2 1200 184TC 575 GP10A Ball 1LE21011CC313EA3 500 GPA1 2.48 86.5 65

2 900 213TC 208-230/460 GP10A Ball 1LE21012AD114EA3 770 GPA1 3.3 82.5 75 2 900 213TC 575 GP10A Ball 1LE21012AD113EA3 770 GPA1 2.64 82.5 75

3 3600 182TC 208-230/460 GP10A Ball 1LE21011CA114EA3 461 GPA1 3.7 85.5 56 3 3600 182TC 575 GP10A Ball 1LE21011CA113EA3 461 GPA1 2.96 85.5 56

3 1800 182TC 208-230/460 GP10A Ball 1LE21011CB114EA3 474 GPA1 4 87.5 59 3 1800 182TC 575 GP10A Ball 1LE21011CB113EA3 474 GPA1 3.2 87.5 59

3 1200 213TC 208-230/460 GP10A Ball 1LE21012AC114EA3 618 GPA1 4 87.5 85 3 1200 213TC 575 GP10A Ball 1LE21012AC113EA3 618 GPA1 3.36 87.5 85

3 900 215TC 208-230/460 GP10A Ball 1LE21012AD214EA3 1066 GPA1 4.8 84 89 3 900 215TC 575 GP10A Ball 1LE21012AD213EA3 1066 GPA1 3.84 84 89

5 3600 184TC 208-230/460 GP10A Ball 1LE21011CA314EA3 573 GPA1 6.2 87.5 62 5 3600 184TC 575 GP10A Ball 1LE21011CA313EA3 573 GPA1 4.96 87.5 62

5 1800 184TC 208-230/460 GP10A Ball 1LE21011CB314EA3 527 GPA1 6.7 87.5 66 5 1800 184TC 575 GP10A Ball 1LE21011CB313EA3 527 GPA1 5.36 87.5 66

5 1200 215TC 208-230/460 GP10A Ball 1LE21012AC214EA3 878 GPA1 6.8 87.5 100 5 1200 215TC 575 GP10A Ball 1LE21012AC213EA3 878 GPA1 5.44 87.5 100

5 900 254TC 208-230/460 GP10A Ball 1LE21012BD114EA3 1471 GPA1 8.8 85.5 157 5 900 254TC 575 GP10A Ball 1LE21012BD113EA3 1471 GPA1 7.04 85.5 157

7.5 3600 213TC 208-230/460 GP10A Ball 1LE21012AA114EA3 723 GPA1 9 88.5 96 7.5 3600 213TC 575 GP10A Ball 1LE21012AA113EA3 723 GPA1 7.2 88.5 96

7.5 1800 213TC 208-230/460 GP10A Ball 1LE21012AB114EA3 704 GPA1 9.5 89.5 102 7.5 1800 213TC 575 GP10A Ball 1LE21012AB113EA3 704 GPA1 7.6 89.5 102

7.5 1200 254TC 208-230/460 GP10A Ball 1LE21012BC114EA3 1119 GPA1 10.5 89.5 163 7.5 1200 254TC 575 GP10A Ball 1LE21012BC113EA3 1119 GPA1 8.4 89.5 163

7.5 900 256TC 208-230/460 GP10A Ball 1LE21012BD214EA3 1531 GPA1 13 85.5 189 7.5 900 256TC 575 GP10A Ball 1LE21012BD213EA3 1531 GPA1 10.4 85.5 189

10 3600 215TC 208-230/460 GP10A Ball 1LE21012AA214EA3 837 GPA1 11.5 89.5 113 10 3600 215TC 575 GP10A Ball 1LE21012AA213EA3 837 GPA1 9.2 89.5 113

10 1800 215TC 208-230/460 GP10A Ball 1LE21012AB214EA3 837 GPA1 12.5 89.5 114 10 1800 215TC 575 GP10A Ball 1LE21012AB213EA3 837 GPA1 10 89.5 114

10 1200 256TC 208-230/460 GP10A Ball 1LE21012BC214EA3 1296 GPA1 13.5 89.5 175 10 1200 256TC 575 GP10A Ball 1LE21012BC213EA3 1296 GPA1 10.8 89.5 175

15 3600 254TC 208-230/460 GP10A Ball 1LE21012BA114EA3 1088 GPA1 18 90.2 168

15 3600 254TC 575 GP10A Ball 1LE21012BA113EA3 1088 GPA1 14.4 90.2 168

15 1800 254TC 208-230/460 GP10A Ball 1LE21012BB114EA3 1064 GPA1 19 91 166 15 1800 254TC 575 GP10A Ball 1LE21012BB113EA3 1064 GPA1 15.2 91 166

20 3600 256TC 208-230/460 GP10A Ball 1LE21012BA214EA3 1320 GPA1 23.5 90.2 179 20 3600 256TC 575 GP10A Ball 1LE21012BA213EA3 1320 GPA1 18.8 90.2 179

20 1800 256TC 208-230/460 GP10A Ball 1LE21012BB214EA3 1259 GPA1 25 91 185 20 1800 256TC 575 GP10A Ball 1LE21012BB213EA3 1259 GPA1 20 91 185

DOE#CC032A

Intr

od

uct

ion

Gen

eral

Pu

rpo

se M

oto

rsSe

vere

Du

ty

Mo

tors

Haz

ard

ou

s D

uty

Mo

tors

Inve

rter

D

uty

Mo

tors

De

nit

e Pu

rpo

se M

oto

rsIE

C M

etri

c M

oto

rsQ

uik

MO

D

Det

ail

Cu

sto

m

Op

tio

ns

Det

ail

Typ

ical

Pe

rfo

rman

ce

Dat

a

Dim

ensi

on

sPa

rt N

um

ber

In

dex




Price $Mult. Sym.

FL Amps*

FL Nom. Eff. (%)

Weight (lbs)

Stock Model

C-Face, Horizontal, Footless

1 3600 143TC 208-230/460 GP10A Ball 1LE21011AA114GA3 358 GPA1 1.4 80 32 1 3600 143TC 575 GP10A Ball 1LE21011AA113GA3 358 GPA1 1.12 80 32

1 1800 143TC 208-230/460 GP10A Ball 1LE21011AB214GA3 358 GPA1 1.5 82.5 34 1 1800 143TC 575 GP10A Ball 1LE21011AB213GA3 358 GPA1 1.2 82.5 34

1 1200 145TC 208-230/460 GP10A Ball 1LE21011AC314GA3 427 GPA1 1.6 80 35 1 1200 145TC 575 GP10A Ball 1LE21011AC313GA3 427 GPA1 1.28 80 35

1 900 182TC 208-230/460 GP10A Ball 1LE21011CD114GA3 662 GPA1 2.1 74 57 1 900 182TC 575 GP10A Ball 1LE21011CD113GA3 662 GPA1 1.64 74 57

1.5 3600 143TC 208-230/460 GP10A Ball 1LE21011AA214GA3 365 GPA1 2 82.5 33 1.5 3600 143TC 575 GP10A Ball 1LE21011AA213GA3 365 GPA1 1.6 82.5 33

1.5 1800 145TC 208-230/460 GP10A Ball 1LE21011AB314GA3 386 GPA1 2.2 84 38 1.5 1800 145TC 575 GP10A Ball 1LE21011AB313GA3 386 GPA1 1.76 84 38

1.5 1200 182TC 208-230/460 GP10A Ball 1LE21011CC114GA3 487 GPA1 2.4 85.5 54 1.5 1200 182TC 575 GP10A Ball 1LE21011CC113GA3 487 GPA1 1.92 85.5 54

1.5 900 184TC 208-230/460 GP10A Ball 1LE21011CD314GA3 708 GPA1 3 77 71 1.5 900 184TC 575 GP10A Ball 1LE21011CD313GA3 708 GPA1 2.4 77 71

2 3600 145TC 208-230/460 GP10A Ball 1LE21011AA314GA3 413 GPA1 2.6 84 35 2 3600 145TC 575 GP10A Ball 1LE21011AA313GA3 413 GPA1 2.08 84 35

2 1800 145TC 208-230/460 GP10A Ball 1LE21011AB414GA3 413 GPA1 3 84 40 2 1800 145TC 575 GP10A Ball 1LE21011AB413GA3 413 GPA1 2.4 84 40

2 1200 184TC 208-230/460 GP10A Ball 1LE21011CC314GA3 527 GPA1 3.1 86.5 65 2 1200 184TC 575 GP10A Ball 1LE21011CC313GA3 527 GPA1 2.48 86.5 65

2 900 213TC 208-230/460 GP10A Ball 1LE21012AD114GA3 797 GPA1 3.3 82.5 75 2 900 213TC 575 GP10A Ball 1LE21012AD113GA3 797 GPA1 2.64 82.5 75

3 3600 182TC 208-230/460 GP10A Ball 1LE21011CA114GA3 487 GPA1 3.7 85.5 56 3 3600 182TC 575 GP10A Ball 1LE21011CA113GA3 487 GPA1 2.96 85.5 56

3 1800 182TC 208-230/460 GP10A Ball 1LE21011CB114GA3 500 GPA1 4 87.5 59 3 1800 182TC 575 GP10A Ball 1LE21011CB113GA3 500 GPA1 3.2 87.5 59

3 1200 213TC 208-230/460 GP10A Ball 1LE21012AC114GA3 645 GPA1 4 87.5 85 3 1200 213TC 575 GP10A Ball 1LE21012AC113GA3 645 GPA1 3.36 87.5 85

3 900 215TC 208-230/460 GP10A Ball 1LE21012AD214GA3 1092 GPA1 4.8 84 89 3 900 215TC 575 GP10A Ball 1LE21012AD213GA3 1092 GPA1 3.84 84 89

5 3600 184TC 208-230/460 GP10A Ball 1LE21011CA314GA3 601 GPA1 6.2 87.5 62 5 3600 184TC 575 GP10A Ball 1LE21011CA313GA3 601 GPA1 4.96 87.5 62

5 1800 184TC 208-230/460 GP10A Ball 1LE21011CB314GA3 554 GPA1 6.7 87.5 66 5 1800 184TC 575 GP10A Ball 1LE21011CB313GA3 554 GPA1 5.36 87.5 66

5 1200 215TC 208-230/460 GP10A Ball 1LE21012AC214GA3 905 GPA1 6.8 87.5 100 5 1200 215TC 575 GP10A Ball 1LE21012AC213GA3 905 GPA1 5.44 87.5 100

5 900 254TC 208-230/460 GP10A Ball 1LE21012BD114GA3 1510 GPA1 8.8 85.5 157 5 900 254TC 575 GP10A Ball 1LE21012BD113GA3 1510 GPA1 7.04 85.5 157

DOE#CC032A



Intro

du

ction

Gen

eral Pu

rpo

se Mo

tors

Severe Du

ty M

oto

rsH

azardo

us

Du

ty Mo

tors

Inverter

Du

ty Mo

tors

De n

ite Pu

rpo

se Mo

tors

IEC M

etric M

oto

rsQ

uikM

OD

D

etailC

usto

m

Op

tion

s Detail

Typical

Perform

ance

Data

Dim

ensio

ns

Part Nu

mb

er In

dex





Price $Mult. Sym.

FL Amps*

FL Nom. Eff. (%)

Weight (lbs)

Stock Model

C-Face, Horizontal, Footless - continued

7.5 3600 213TC 208-230/460 GP10A Ball 1LE21012AA114GA3 750 GPA1 9 88.5 96 7.5 3600 213TC 575 GP10A Ball 1LE21012AA113GA3 750 GPA1 7.2 88.5 96

7.5 1800 213TC 208-230/460 GP10A Ball 1LE21012AB114GA3 730 GPA1 9.5 89.5 102 7.5 1800 213TC 575 GP10A Ball 1LE21012AB113GA3 730 GPA1 7.6 89.5 102

7.5 1200 254TC 208-230/460 GP10A Ball 1LE21012BC114GA3 1157 GPA1 10.5 89.5 163 7.5 1200 254TC 575 GP10A Ball 1LE21012BC113GA3 1157 GPA1 8.4 89.5 163

7.5 900 256TC 208-230/460 GP10A Ball 1LE21012BD214GA3 1570 GPA1 13 85.5 189 7.5 900 256TC 575 GP10A Ball 1LE21012BD213GA3 1570 GPA1 10.4 85.5 189

10 3600 215TC 208-230/460 GP10A Ball 1LE21012AA214GA3 863 GPA1 11.5 89.5 113 10 3600 215TC 575 GP10A Ball 1LE21012AA213GA3 863 GPA1 9.2 89.5 113

10 1800 215TC 208-230/460 GP10A Ball 1LE21012AB214GA3 863 GPA1 12.5 89.5 114 10 1800 215TC 575 GP10A Ball 1LE21012AB213GA3 863 GPA1 10 89.5 114

10 1200 256TC 208-230/460 GP10A Ball 1LE21012BC214GA3 1335 GPA1 13.5 89.5 175 10 1200 256TC 575 GP10A Ball 1LE21012BC213GA3 1335 GPA1 10.8 89.5 175

15 3600 254TC 208-230/460 GP10A Ball 1LE21012BA114GA3 1126 GPA1 18 90.2 168 15 3600 254TC 575 GP10A Ball 1LE21012BA113GA3 1126 GPA1 14.4 90.2 168

15 1800 254TC 208-230/460 GP10A Ball 1LE21012BB114GA3 1103 GPA1 19 91 166 15 1800 254TC 575 GP10A Ball 1LE21012BB113GA3 1103 GPA1 15.2 91 166

20 3600 256TC 208-230/460 GP10A Ball 1LE21012BA214GA3 1358 GPA1 23.5 90.2 179 20 3600 256TC 575 GP10A Ball 1LE21012BA213GA3 1358 GPA1 18.8 90.2 179

20 1800 256TC 208-230/460 GP10A Ball 1LE21012BB214GA3 1297 GPA1 25 91 185 20 1800 256TC 575 GP10A Ball 1LE21012BB213GA3 1297 GPA1 20 91 185

DOE#CC032A


Intr

od

uct

ion

Gen

eral

Pu

rpo

se M

oto

rsSe

vere

Du

ty

Mo

tors

Haz

ard

ou

s D

uty

Mo

tors

Inve

rter

D

uty

Mo

tors

De

nit

e Pu

rpo

se M

oto

rsIE

C M

etri

c M

oto

rsQ

uik

MO

D

Det

ail

Cu

sto

m

Op

tio

ns

Det

ail

Typ

ical

Pe

rfo

rman

ce

Dat

a

Dim

ensi

on

sPa

rt N

um

ber

In

dex


General Purpose - TEFC MotorsGP10 - (Cast Iron Frame) High Ef ciency

GP10 motors are ideal for both indoor and outdoor applications and in operating atmospheres that contain moisture, dust and grit. These industry workhorses are ideal for use in material handling, pump, fan, compressor and other general purpose applications.

Performance Speci cations 1 to 200 HP

1.15 service factor, 40C ambient

3600, 1800, 1200 or 900 RPM

3-phase, 60 Hz; 208-230/460 and 575 volt operation (143T 256T)

3-phase, 60 Hz; 230/460 volt operation under 100 HP, 460 volt 100 HP and above, 575 volt available (284T 449T)

Meet or exceed EPAct ef ciency standards

Class F insulation, Class B temperature rise

NEMA design B, continuous duty

143T 449T frame

Features for Long LifeFrame & Bearing Housings Cast iron construction for exceptional structural integrity & corrosion resistance, equipped with integrally cast feet. Condensation drain holes (143T-256T frames) or condensation T-drains (284T-449T frames) are provided. Lifting eyebolts are included with motors > 75 lbs.

Rotor A unique rotor bar design provides improved ef ciency. Large cross section bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance.

Stator/Windings Manufactured with premium electrical-grade steel laminations and copper electrical magnet wire to lower losses for improved ef ciencies. A unique stator core design lowers ux density while increasing cooling capacity. Large conductor cross-section reduces resistance and lowers stator losses.

Insulation Proprietary inverter-rated Class F non-hygroscopic insulation system with NEMA Class B temperature rise @ 1.0SF provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock. This insulation system meets or exceeds NEMA MG1-2006, Part 31, making all motors suitable for operation with adjustable frequency drives.

Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air ow, reduces noise and provides dependable cooling.Polycarbonate fan covers are provided on 143T-365T frames and cast iron for frames 404T and larger.

Bearings Oversized, lubricated for life (143T-256T frames). Regreasable, oversized, single shielded (284T-449T frames) with cast iron inner caps (444T449T frames). Alemite grease ttings on the inlets and pipe plugs on the relief ports (284T449T frames) for ease of routine maintenance. For added bearing protection, motors are equipped with a drive end shaft V-ring slinger.

Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases.

Oversized Conduit Box Larger than industry standards, diagonally-split, gasketed and rotatable in 90 increments for quick and easy connections. Leads are non-wicking and are clearly and permanently marked. Aluminum construction for frames 143T to 256T, steel for frames 284T to 405T and cast iron for 444T frames and larger.

Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist rust and corrosion.

Modi able & Custom Siemens motors are available with a wide variety of QuikMOD modi cations or custom designs to meet your speci c motor needs.

Speci cations table begins on the next page J

Intro

du

ction

Gen

eral Pu

rpo

se Mo

tors

Severe Du

ty M

oto

rsH

azardo

us

Du

ty Mo

tors

Inverter

Du

ty Mo

tors

De n

ite Pu

rpo

se Mo

tors

IEC M

etric M

oto

rsQ

uikM

OD

D

etailC

usto

m

Op

tion

s Detail

Typical

Perform

ance

Data

Dim

ensio

ns

Part Nu

mb

er In

dex





Price $Mult. Sym.

FL Amps*

FL Nom. Eff. (%)

Weight (lbs)

Stock Model

Horizontal, Foot Mounted

1 3600 143T 208-230/460 GP10 Ball 1LE22011AA114AA3 315 GP1 1.4 80.0 51 1 3600 143T 575 GP10 Ball 1LE22011AA113AA3 315 GP1 1.1 80.0 51 1 1800 143T 208-230/460 GP10 Ball 1LE22011AB214AA3 315 GP1 1.5 82.5 53 1 1800 143T 575 GP10 Ball 1LE22011AB213AA3 315 GP1 1.2 82.5 53 1 1200 145T 208-230/460 GP10 Ball 1LE22011AC314AA3 392 GP1 1.6 80.0 54 1 1200 145T 575 GP10 Ball 1LE22011AC313AA3 392 GP1 1.3 80.0 54 1 900 182T 208-230/460 GP10 Ball 1LE22011CD114AA3 614 GP1 2.1 74.0 86 1 900 182T 575 GP10 Ball 1LE22011CD113AA3 614 GP1 1.6 74.0 86

1.5 3600 143T 208-230/460 GP10 Ball 1LE22011AA214AA3 323 GP1 2.0 82.5 53 1.5 3600 143T 575 GP10 Ball 1LE22011AA213AA3 323 GP1 1.6 82.5 53 1.5 1800 145T 208-230/460 GP10 Ball 1LE22011AB314AA3 347 GP1 2.2 84.0 58 1.5 1800 145T 575 GP10 Ball 1LE22011AB313AA3 347 GP1 1.8 84.0 58 1.5 1200 182T 208-230/460 GP10 Ball 1LE22011CC114AA3 419 GP1 2.4 85.5 83 1.5 1200 182T 575 GP10 Ball 1LE22011CC113AA3 419 GP1 1.9 85.5 83 1.5 900 184T 208-230/460 GP10 Ball 1LE22011CD314AA3 666 GP1 3.0 77.0 99 1.5 900 184T 575 GP10 Ball 1LE22011CD313AA3 666 GP1 2.4 77.0 99 2 3600 145T 208-230/460 GP10 Ball 1LE22011AA314AA3 376 GP1 2.6 84.0 54 2 3600 145T 575 GP10 Ball 1LE22011AA313AA3 376 GP1 2.1 84.0 54 2 1800 145T 208-230/460 GP10 Ball 1LE22011AB414AA3 377 GP1 3.0 84.0 59 2 1800 145T 575 GP10 Ball 1LE22011AB413AA3 377 GP1 2.4 84.0 59 2 1200 184T 208-230/460 GP10 Ball 1LE22011CC314AA3 463 GP1 3.1 86.5 94 2 1200 184T 575 GP10 Ball 1LE22011CC313AA3 463 GP1 2.5 86.5 94 2 900 213T 208-230/460 GP10 Ball 1LE22012AD114AA3 766 GP1 3.3 82.5 123 2 900 213T 575 GP10 Ball 1LE22012AD113AA3 766 GP1 2.6 82.5 123 3 3600 182T 208-230/460 GP10 Ball 1LE22011CA114AA3 419 GP1 3.7 85.5 85 3 3600 182T 575 GP10 Ball 1LE22011CA113AA3 419 GP1 3.0 85.5 85 3 1800 182T 208-230/460 GP10 Ball 1LE22011CB114AA3 433 GP1 4.0 87.5 88 3 1800 182T 575 GP10 Ball 1LE22011CB113AA3 433 GP1 3.2 87.5 88 3 1200 213T 208-230/460 GP10 Ball 1LE22012AC114AA3 595 GP1 4.2 87.5 143 3 1200 213T 575 GP10 Ball 1LE22012AC113AA3 595 GP1 3.4 87.5 143 3 900 215T 208-230/460 GP10 Ball 1LE22012AD214AA3 1098 GP1 4.8 84.0 138 3 900 215T 575 GP10 Ball 1LE22012AD213AA3 1098 GP1 3.8 84.0 138 5 3600 184T 208-230/460 GP10 Ball 1LE22011CA314AA3 546 GP1 6.2 87.5 91 5 3600 184T 575 GP10 Ball 1LE22011CA313AA3 546 GP1 5.0 87.5 91 5 1800 184T 208-230/460 GP10 Ball 1LE22011CB314AA3 494 GP1 6.7 87.5 94 5 1800 184T 575 GP10 Ball 1LE22011CB313AA3 494 GP1 5.4 87.5 94 5 1200 215T 208-230/460 GP10 Ball 1LE22012AC214AA3 888 GP1 6.8 87.5 151 5 1200 215T 575 GP10 Ball 1LE22012AC213AA3 888 GP1 5.4 87.5 151 5 900 254T 208-230/460 GP10 Ball 1LE22012BD114AA3 1530 GP1 8.8 85.5 218 5 900 254T 575 GP10 Ball 1LE22012BD113AA3 1530 GP1 7.0 85.5 218

DOE#CC032A

Prices and speci cations are subject to change without noticeStock availability subject to saleQuikMOD delivery for stocked motors only*FL Amps at 460V or 575VFrames 280-440 available after RGZP stock motors are depleted

Intr

od

uct

ion

Gen

eral

Pu

rpo

se M

oto

rsSe

vere

Du

ty

Mo

tors

Haz

ard

ou

s D

uty

Mo

tors

Inve

rter

D

uty

Mo

tors

De

nit

e Pu

rpo

se M

oto

rsIE

C M

etri

c M

oto

rsQ

uik

MO

D

Det

ail

Cu

sto

m

Op

tio

ns

Det

ail

Typ

ical

Pe

rfo

rman

ce

Dat

a

Dim

ensi

on

sPa

rt N

um

ber

In

dex





Price $Mult. Sym.

FL Amps*

FL Nom. Eff. (%)

Weight (lbs)

Stock Model

Horizontal, Foot Mounted - continued

7.5 3600 213T 208-230/460 GP10 Ball 1LE22012AA114AA3 713 GP1 9.0 88.5 137 7.5 3600 213T 575 GP10 Ball 1LE22012AA113AA3 713 GP1 7.2 88.5 137 7.5 1800 213T 208-230/460 GP10 Ball 1LE22012AB114AA3 691 GP1 9.5 89.5 143 7.5 1800 213T 575 GP10 Ball 1LE22012AB113AA3 691 GP1 7.6 89.5 143 7.5 1200 254T 208-230/460 GP10 Ball 1LE22012BC114AA3 1134 GP1 10.5 89.5 224 7.5 1200 254T 575 GP10 Ball 1LE22012BC113AA3 1134 GP1 8.4 89.5 224 7.5 900 256T 208-230/460 GP10 Ball 1LE22012BD214AA3 1597 GP1 13.0 85.5 250 7.5 900 256T 575 GP10 Ball 1LE22012BD213AA3 1597 GP1 10.4 85.5 250 10 3600 215T 208-230/460 GP10 Ball 1LE22012AA214AA3 841 GP1 11.5 89.5 150 10 3600 215T 575 GP10 Ball 1LE22012AA213AA3 841 GP1 9.2 89.5 150 10 1800 215T 208-230/460 GP10 Ball 1LE22012AB214AA3 841 GP1 12.5 89.5 151 10 1800 215T 575 GP10 Ball 1LE22012AB213AA3 841 GP1 10.0 89.5 151 10 1200 256T 208-230/460 GP10 Ball 1LE22012BC214AA3 1334 GP1 13.5 89.5 236 10 1200 256T 575 GP10 Ball 1LE22012BC213AA3 1334 GP1 10.8 89.5 236 10 900 284T 230/460 GP10 Ball 1LE22012CD116AA3 2311 GP1 12.0 91.0 375

10 900 284T 575 GP10 Ball 1LE22012CD113AA3 2311 GP1 9.6 91.0 375

15 3600 254T 208-230/460 GP10 Ball 1LE22012BA114AA3 1099 GP1 18.0 90.2 228 15 3600 254T 575 GP10 Ball 1LE22012BA113AA3 1099 GP1 14.4 90.2 228 15 1800 254T 208-230/460 GP10 Ball 1LE22012BB114AA3 1073 GP1 19.0 91.0 227 15 1800 254T 575 GP10 Ball 1LE22012BB113AA3 1073 GP1 15.2 91.0 227 15 1200 284T 230/460 GP10 Ball 1LE22012CC116AA3 1925 GP1 20.0 90.2 375 15 1200 284T 575 GP10 Ball 1LE22012CC113AA3 1925 GP1 16.0 90.2 375 15 900 286T 230/460 GP10 Ball 1LE22012CD216AA3 2746 GP1 23.0 91.0 430

15 900 286T 575 GP10 Ball 1LE22012CD213AA3 2746 GP1 18.4 91.0 430

20 3600 256T 208-230/460 GP10 Ball 1LE22012BA214AA3 1360 GP1 23.5 90.2 241 20 3600 256T 575 GP10 Ball 1LE22012BA213AA3 1360 GP1 18.8 90.2 241 20 1800 256T 208-230/460 GP10 Ball 1LE22012BB214AA3 1292 GP1 25.0 91.0 246 20 1800 256T 575 GP10 Ball 1LE22012BB213AA3 1292 GP1 20.0 91.0 246 20 1200 286T 230/460 GP10 Ball 1LE22

Siemens NEMA IEC Selection and Pricing Guide 2009 2010

Documents

Transcript of Siemens NEMA IEC Selection and Pricing Guide 2009 2010