Side Entry Mixer - Product line specifications rev 0 …€¢ Design and mixer selections are ... o...
Transcript of Side Entry Mixer - Product line specifications rev 0 …€¢ Design and mixer selections are ... o...
Storage:o Crude Oil and derivates
o Bitumen
o Bio-fuels
o Lubricant
Blendingo Gasoline
o Fuel Oil
o Kerosene
MRM Side Entry mixers Application coverage
Storage & Blending are the two main customer applications
Process functionso Blendingo BS&Wo Homogeneizationo Temperature uniformity
Confidential and Proprietary
• Design and mixer selections aredriven by what is important to ourcustomers:
Safety and environment protection Process performance Reliability Easy, fast and reduced maintenance
MRM SIDE ENTRY MIXERS – ANSWER TO MARKET
4
MILTON ROY Mixing SIDE ENTRY mixer solution provides the mostCapital and Operating cost effective solution, while offering thesafest and the better environmental protection answer.
Confidential and Proprietary
• Mixer selections are driven bythe following concerns:
End up with the lowest powerconsumption for the specifiedprocess conditions
The smallest flange possible
But we can very easily adapt toexisting flange dimensions
MRM SIDE ENTRY MIXERS – ANSWER TO MARKET
5 Confidential and Proprietary
GEAR DRIVEN
MRM SIDE ENTRY MIXERS – MAIN DESIGN FEATURES
6
BELT DRIVEN
• For tanks up to1.3 MBBL –200,000 M3
• Fixed or variableangle
• Compliant withOil Major’sspecifications
• UL/ATEXcompliance
• CE, Gost-Rcertified
Confidential and Proprietary
• Standard Common Features to Gear andBelt Driven Configurations:
• 10 to 75 HP / 7.5 to 55 Kw
• Fixed or Variable-Angle
• 316L Ball for variable angle configuration
• High efficiency 4 blade Sabre ® Impeller
• Operating temperature up to 480°F / 250°C
• Tank shut off device
• Carbon steel wet end material of construction
7
MRM SIDE ENTRY MIXERS – MAIN DESIGN FEATURES
Confidential and Proprietary
• Standard Common Features to Gear andBelt Driven Configurations:
• Single Mechanical seal
• Mounting flange from 16 to 36 inches
• IEC or NEMA standard motor (50/60 Hz), TEFC,Ex-PROOF
• Tie Rod for mixer weight above 1540 Lbs/700 Kg
8
MRM SIDE ENTRY MIXERS – MAIN DESIGN FEATURES
Confidential and Proprietary
• Standard specific design features forBelt Driven Configuration:
• Synchronous belt GATES POWERGRIP GT3 ®
• Standard Option available for Belt DrivenConfiguration:
• V-Belt GOODYEAR EAGLE ®
9
MRM SIDE ENTRY MIXERS – MAIN DESIGN FEATURES
Confidential and Proprietary
STANDARD OPTIONSAvailable for
Gear and Belt Drivenconfigurations
Confidential and Proprietary11
MRM SIDE ENTRY MIXERS – OPTIONS AVAILABLE
• 316L or Duplex Steel wetted parts material ofconstruction
• Greased bearings vs standard sealed bearings
• Seal leak detection system (per API plan 65, collectionof seal leakage)
12
MRM SIDE ENTRY MIXERS – OPTIONS AVAILABLE
Confidential and Proprietary
KEY DESIGN FEATURES – OPTIONS AVAILABLESEAL LEAK DETECTION SYSTEM – API 65
For safety and environmentally sensitive areasConfidential and Proprietary
MechanicalSeal
Seal leakagecollection pot
High level alarm(switch or
transmitter)
15
MRM SIDE ENTRY MIXERS – OPTIONS AVAILABLEDouble mechanical seal and API 52/53 buffer systems
Confidential and Proprietary
• For BELT or GEAR DRIVEN MIXERS• Requirements:
o when product in the tank isdangerous and must not leak toatmosphere
o When product in the tank is hoto Typical application with light end
hydrocarbons: benzen, etc.
API 52 is not pressurized (seal leak iscollected in the seal pot)
API 53 is pressurized (buffer liquid leaksin the tank)
16
MRM SIDE ENTRY MIXERS – OPTIONS AVAILABLEShaft Vertical center line offset (as per API)
Confidential and Proprietary
OFFSET
Flangecenter line
ShaftCenter line
17
MRM SIDE ENTRY MIXERS – OPTIONS AVAILABLE10° flange offset (orientation) for fixed angle mixers
Confidential and Proprietary
10°
View from above
• Safety and Environment protection first
• Reduced your blend times, refined productsquality & crude quality
• Increase productivity with advanced Sabre
propeller designs
• Lower your maintenance cost & increaseMean Time Between Planned Maintenance
OUR COMMITMENTs to OUR CUSTOMERS
Confidential and Proprietary