Shaving Stand for Brush and Razor. - media.prusaprinters.org€¦ · My old shaving stand was small...
2
6.54 hrs 1 pcs f 0.15 mm k 0.40 mm h 1 54.00 g d Prusa MK3/S Print Files (.gcode) DOWNLOAD ALL FILES Summary My old shaving stand was small and unstable. So I made a new one a little bigger and the top part is angled up to hold in the brush and razor better. Household > Bathroom stand shaving Printed in PLA Filamentum Ivory White. JeepingJohnny Shaving Stand for Brush and Razor. VIEW IN BROWSER updated 11. 5. 2020 | published 11. 5. 2020
Transcript of Shaving Stand for Brush and Razor. - media.prusaprinters.org€¦ · My old shaving stand was small...
6.54 hrs
1 pcs
f
0.15 mm
k
0.40 mm
h
1
54.00 g
d
PrusaMK3/S
Print Files (.gcode) DOWNLOAD ALL FILES
Summary
My old shaving stand was small and unstable. So I made a new one a littlebigger and the top part is angled up to hold in the brush and razor better.
Household > Bathroom
stand shaving
Printed in PLA Filamentum Ivory White.
JeepingJohnny
Shaving Stand forBrush and Razor.
VIEW IN BROWSER
updated 11. 5. 2020 | published 11. 5. 2020
10.6 MB
6.54 hrs f 0.15 mm k 0.40 mm h PLA 54.00 g d PrusaMK3/S
updated 11. 5. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
2.7 MBupdated 11. 5. 2020
10.7 MBupdated 11. 5. 2020
592.5 KBupdated 11. 5. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
shaving-stand_015mm_pla_mk3s_6h33m.gcode
shaving-stand.3mf
shaving-stand.stl
shaving-stand-15.blend
