#SEU12 - 502 taking solid edge part modeling to the next level advanced topics - dan vinson
-
Upload
siemens-plm-software -
Category
Technology
-
view
477 -
download
5
description
Transcript of #SEU12 - 502 taking solid edge part modeling to the next level advanced topics - dan vinson
#SEU12
Taking Solid Edge Part Modeling to the next level:
Advanced Topics
Dan Vinson
Solid Edge
Product Manager Part and Sheet Metal Modeling
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 2
Introduction
Dan Vinson
Solid Edge since ‘04. Product Manager since ’07 (Sync Development).
Part & Sheet Metal Environments
Synchronous & Ordered Modes
PathFinder
Creation & Edit of New Elements
Assembly Responsibilities
Tablet Applications
Multi-Body Modeling
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 3
Topics
Multi-Body Usage
Single Bill Of Materials
Design in Concert
Environmental Merge
Publishing Multiple Bodies
Divide Part
Hole Recognition
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 4
Product Wide Commitment
Single Design Body since ‘95. Multi- Body since ’12
Part & Sheet Metal Environments
Synchronous & Ordered Modes
PathFinder
Creation & Edit of New Elements
Assembly Responsibilities
Tablet Applications
Multi-Body Modeling
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 5
Multi-Body Revolution
Core Modeling Enhancements to all Environments.
Single file holds multiple closely related design bodies
Part and Sheet Metal Environments merge
Applied in both Synchronous and Ordered Modes
Solid Construction and Design Bodies approaching parity
Construction Solids and Surfaces increase distinction
New Boolean functionality for body management
All of this is Completely Optional
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 6
Multi-Body Objectives
Single Entry on the Bill Of Material (BOM)
- Condensing the complex and common into a single file.
- Purchased elements are actually assemblies used as parts.
Design in Concert
- When elements are highly interdependent
- Contextual creation uses existing elements for new part genesis.
Environmental Merge
- PART and SHEET METAL bodies in a single file
- Integrated when required, Invisible otherwise
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 7
Single Bill of Materials Use
Simplify your Assemblies
- Condensing the complex and common into a single file.
- Purchased elements are actually assemblies used as parts.
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 8
Single Bill of Materials Use
Best Use Practices
- Insert constructions for Multi Body import
- Tolerances separate bodies
- Design / Construction
Solids
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 9
Multi-Body Demo 1
Demo
- Insert Assembly
- Identify Bodies
- Toggle Bodies
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 10
Design Objective
Design in Concert
- Highly interdependent elements can be edited simultaneously
- All relationships and dimensions may
be used between existing elements.
- Added features isolated to one body
- Placement in relation to another element
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 11
Multi-Body Use
Integrated model rules still apply
- Synchronous before Ordered
- Ordered Pathfinder has typical dependency
PathFinder is Interlaced
- Ordered Pathfinder has typical dependency
SM Features
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 12
Multi-Body Use
Integrated model rules still apply
- Synchronous before Ordered
- Ordered Pathfinder has typical dependency
PathFinder is Interlaced
- Ordered Pathfinder has typical dependency
Part Features
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 13
Multi-Body Use
Integrated model rules still apply
- Synchronous before Ordered
- Ordered Pathfinder has typical dependency
PathFinder is Interlaced
- Ordered Pathfinder has typical dependency
Relationship
Dimension
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 14
Design in Concert Workflows
- Initial Concept stage of development for any new design
1. Create a master part / SM file
2. Insert (Copy) the main components
3. Manipulate and edit the main
component positions and orientation
4. Publish the files
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 15
Design in Concert
Examples (when to use)
- Newt Suit
- Initial Concept
- Reverse Engineering
- 853 Concept
- Surfacing
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 16
Demo 2
- Interlaced Pathfinder
- Shared elements
- Editing Simultaneously
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 17
Multi-Body Solutions
Environmental Merge
- Maintain all modeling Abilities
- Shift Tools on Activation
- Transform to Sheet Metal in both Sync and Ordered
- Construction Sheets and Sketches are always shared
PART Tool Ribbon
Sheet Metal Tool Ribbon
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 18
Multi-Body Use
Publish
Similar to Divide Part, yet simpler.
Master Part File
Individual Part Files
Divide Part
Divide Part
Individual Part Files
Divide Part
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 19
Multi-Body Example
Divide Part
Complexity levels rise with each division
Master Part File
Individual Part Files
Divide Part
Individual Part Files
Divide Part Divide Part
Divide Part Divide Part
Individual Part Files
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 20
Multi-Body Example
Divide Part
Assembly is built manually
Looks much like the original file.
Master Part File
Individual Part Files
Divide Part
Individual Part Files
Divide Part Divide Part
Divide Part Divide Part
Individual Part Files
Divide Part Divide Part
Assembly
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 21
Multi-Body Example
Divide Part
Don’t forget these!
Undivided parts from earlier versions
Master Part File
Assembly
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 22
Multi-Body Example
Publish
Creates individual Part and Sheet Metal files
Creates an built associative assembly
Master Part File
Individual Part Files
Assembly
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 23
Multi-Body Publish
Publish Demo
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 24
Integrated Models
Part and Sheet Metal in same file leads to…
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 25
Formed Metal Tooling
Create Part, Punch and Die at once.
Part and Sheet Metal Design in either file type.
Synchronous Live Section edits to all associated faces simultaneously
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 26
Multi-Body Use
Formed Sheet Metal Tooling
- Product and tooling are intricately dependent. Why consider them separately?
- Use for creating:
- Punch and Die
- Forming Dies
- Injection Molds
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 27
Solid Edge Mobile Viewer
View your models on your iPad
- Zoom, Rotate and Pan models with multi-touch
- Works with all modes and environments (including multi-body)
- Part, SM, and Assembly files condensed into lightweight file type (.sev)
- Show / Hide controls for separate elements including dimensions
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 28
Solid Edge Mobile Viewer
View your models on your iPad
- Zoom, Rotate and Pan models with multi-touch
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 29
Solid Edge Mobile Viewer
View your models on your iPad
- Zoom, Rotate and Pan models with multi-touch
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 30
Solid Edge Mobile Viewer
View your models on your iPad
- Zoom, Rotate and Pan models with multi-touch
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 31
Solid Edge Mobile Viewer
- Share Models and images of model
- PMI visible for design communication
Free at the Apple App Store
Available now
ST5 is required for file translation
#SEU12
Thank You! Questions?