Session Selection Guide - aicnet.it · Studio 5000® Application Code Manager: Introduction and...

Register now to secure your seat at the event: http://www.rockwellautomation.com/en_UK/events/ra-teched/overview.page

Register now to secure your seat at the event: http://www.rockwellautomation.com/en_UK/events/ra-teched/overview.page

#ROKTechED

Session Selection GuideOctober 17-19 2017Disneyland Resort® Paris, France

EUROPE, MIDDLE EAST, AFRICA

2

Week-at-a-Glance

Monday October 16, 2017

Tuesday October 17, 2017

Wednesday October 18, 2017

Thursday October 19, 2017

7:00 a.m.BreakfastTime Square

07h30 - 09h30

BreakfastTime Square

07h30 - 09h30

BreakfastTime Square

07h00 - 08h00

8:00 a.m. Sessions

9:00 a.m.Keynote Session

Time Square 9h00 - 10h00

Sessions

10:00 a.m.Keynote Session

Time Square 10h00 - 11h00

Sessions Sessions

11:00 a.m. Sessions Sessions Sessions

12:00 p.m. SessionsLunch

Time Square12h00 - 13h00

LunchTime Square

12h00 - 13h00

1:00 p.m.Lunch


Sessions Sessions

2:00 p.m.

Registration

Disney’s Hotel New York Convention Center

Registration Desk

15h00 - 20h00

Sessions Sessions Sessions

3:00 p.m. Sessions Sessions

4:00 p.m. Sessions Sessions

5:00 p.m. Sessions

6:00 p.m.

7:00 p.m. Welcome reception and entertainment


EDFestDisneyland Paris

19h30 - 24h008:00 p.m.

33

Room Grand Ballroom A

Grand Central Station 1

Radio City Ballroom 1



Grand Ballroom F

Grand Ballroom G

Grand Ballroom H

Grand Ballroom K

Grand Ballroom E

Grand Ballroom M

Grand Ballroom C

Grand Ballroom B

Colombus Avenue 1

Madison Avenue Room

Discussions Discussions Technical Session Technical Session Technical Session Lab Lab Lab Lab Lab Lab Lab Discussions Discussions Lab

From 7:30 Breakfast - Time square Breakfast - Time square From 7:30

10:00 Opening Keynote - Welcome and Introduction - Time Square Opening Keynote - Welcome and Introduction - Time Square 10:00

11:00

IN17 MG01 NS04 CL01 CL36 IN04 NS13 VZ04 CL16 VZ08 CL04 PR15 EP01 Experience Rockwell Automation

technologies at your own pace, Within this room feel free

to drop in and via hands on labs

experience the base features of our key

products platforms.

11:00

Health and Diagnostics at Your Fingertips

Smart safety Demo using TeamONE

Digitalization drives New Business Models for Machine Builders,

Manufacturers and System Integrators

Improve Visibility and Diagnostics of your

Network with Network Management Software

Studio 5000 Logix Designer®: Overview

Smart Devices: Helping Design, Operate

and Maintain The Connected Enterprise

FactoryTalk VantagePoint EMI Lab:

Introductionto Analytics

Advanced Stratix™ Switch and EtherNet/IP Features in Converged

Plantwide Ethernet (CPwE) Architectures

Advanced Lab for Machine-level HMI

with FactoryTalk View Machine

Edition and PanelView Plus 7

Integrated Motion on EtherNet/IP: Advanced Lab

FactoryTalk View Site Edition: What’s

NEW in v9.0!

Studio 5000 Logix Designer®:

Advanced Lab

Enhance Operating Effectiveness with New FactoryTalk Batch View and

eProcedure

Interface and Workflow between

EPLAN and Rockwell Automation Studio

5000 Designer

12:00

SF13 MG02 IN02 IN28 PR32 EP02

12:00

Whats New in Safety? CSIA - Best Practices drive System Integration

Company Excellence

FactoryTalk VantagePoint EMI:

Analytics in 50

Operate and optimize your plant with

information systems

High Availability in Process Control Systems

Discover another wireless access

solution from HMS with the Anybus

Wireless Bolt

13:00 Lunch - Time Square Lunch - Time Square 13:00

14:00

SF15 MG03 NS21 CL35 SY16 SY08 IN05 VZ09 NS17 IN13 CL06 PR16 EP03 Experience Rockwell Automation




products platforms.

14:00

Machinery Safety Standards and Trends

Reality Talks - How The Connected Enterprise boosts your Business

Cisco: Digital Manufacturing

Solutions in Practice

Machine start-up made easy

MagneMotion& iTRAK®:

Demonstration ofIndependent Cart

Technology

ThinManager Experience the

Platform’s Power and Simplicity: Basic Lab


Advanced Analytics

CL10

Implementing FactoryTalk® Alarms

and Events

Network Security for EtherNet/IP using the Stratix 5950

Security Appliance as a Part of Defense-

in-Depth Strategy

Increase Operational Flexibility With

Data-Driven Decisions for Easier

Compliance

Studio 5000® Application

Code Manager Project Execution

and Library Management: Lab

Controller Based Batching Using

SequenceManager

Why you should offer integrated

stepper motors to your customers

15:00

NS06 MG07

ED25

CL14 CL10 EP04 IN37

15:00

Deploy Resilient Network Architectures

for The Connected Enterprise

Behind the Scenes - How to approach the several Industries in

today’s market

Integrated Motion on EtherNet/IP: Solution

Overview

CompactLogix® 5480 Controller

Integrate the mg in special machines and automate the weighing of tanks

Dynamix Integrated Condition Monitoring

demo

16:00

IN01 MG05 IN19 NS30 CL05 SY09 IN08 VZ13 SF01 IN14 CL09 CL19 EP05 PR20 Experience Rockwell Automation




products platforms.

16:00

Driving Positive Business Outcomes with Information

Solutions

Reality Talks - Best Practice of System

Integrators

Microsoft & Rockwell Automation in

Industrial Analytics: Power BI, Machine Learning and BOTs

Gain knowledge of the requirements to

implement a plant wide network

Studio 5000® Application Code

Manager: Introduction and Demonstration

ThinManager From New Server to Completed

Deployment: Advanced Lab

FactoryTalk Historian Site Edition: Advanced

Lab

Introductory Lab for Designing Machine-

level HMI with PanelView™ 5500 and Studio 5000 View Designer™

Advanced Programming Techniques for

Integrated Safety Applications

Better Manage OEE for More Efficient

and Profitable Operations

CompactLogix® 5380 Controller:

Hands-on Experience

Connected Components Workbench™ Software Lab

A remote solution for an easy

integration of Rockwell PAC in Profibus DP

Networks

Real Time Energy Optimization: dispatch

chillers, pumps, tur-bines, boilers and com-

pressors intelligently and automatically

17:00 IN01

MG06

PR23

IN28

ED37

EP08 PR22

17:00

Behind the Scenes - System Integrators

are key in our Solution Business


information systems

Introducing WirelessHART with

EtherNet/IP Gateway and Add-On-Profile

Migration Tools to Convert Your Legacy

DCS and PLC5 Systems to the PlantPAx System

18:00 18:00

19:00 Welcome reception and entertainment - Time Square Welcome reception and entertainment - Time Square 19:00

Tuesday, 17 October

44






Grand Ballroom F

Grand Ballroom G

Grand Ballroom H

Grand Ballroom K

Grand Ballroom E

Grand Ballroom M

Grand Ballroom C

Grand Ballroom B

Colombus Avenue 1

Madison Avenue Room



10:00 Opening Keynote - Welcome and Introduction - Time Square Opening Keynote - Welcome and Introduction - Time Square 10:00

11:00

IN17 MG01 NS04 CL01 CL36 IN04 NS13 VZ04 CL16 VZ08 CL04 PR15 EP01 Experience Rockwell Automation




products platforms.

11:00



Digitalization drives New Business Models for Machine Builders,

Manufacturers and System Integrators

Improve Visibility and Diagnostics of your

Network with Network Management Software













NEW in v9.0!


Advanced Lab

Enhance Operating Effectiveness with New FactoryTalk Batch View and

eProcedure

Interface and Workflow between

EPLAN and Rockwell Automation Studio

5000 Designer

12:00

SF13 MG02 IN02 IN28 PR32 EP02

12:00

Whats New in Safety? CSIA - Best Practices drive System Integration

Company Excellence


Analytics in 50


information systems


Discover another wireless access

solution from HMS with the Anybus

Wireless Bolt


14:00

SF15 MG03 NS21 CL35 SY16 SY08 IN05 VZ09 NS17 IN13 CL06 PR16 EP03 Experience Rockwell Automation




products platforms.

14:00


Reality Talks - How The Connected Enterprise boosts your Business

Cisco: Digital Manufacturing

Solutions in Practice



Demonstration ofIndependent Cart

Technology




Advanced Analytics

CL10


and Events



in-Depth Strategy



Compliance





SequenceManager

Why you should offer integrated

stepper motors to your customers

15:00

NS06 MG07

ED25

CL14 CL10 EP04 IN37

15:00

Deploy Resilient Network Architectures

for The Connected Enterprise

Behind the Scenes - How to approach the several Industries in

today’s market


Overview


Integrate the mg in special machines and automate the weighing of tanks

Dynamix Integrated Condition Monitoring

demo

16:00

IN01 MG05 IN19 NS30 CL05 SY09 IN08 VZ13 SF01 IN14 CL09 CL19 EP05 PR20 Experience Rockwell Automation




products platforms.

16:00

Driving Positive Business Outcomes with Information

Solutions

Reality Talks - Best Practice of System

Integrators

Microsoft & Rockwell Automation in

Industrial Analytics: Power BI, Machine Learning and BOTs








Lab








Hands-on Experience


A remote solution for an easy

integration of Rockwell PAC in Profibus DP

Networks

Real Time Energy Optimization: dispatch

chillers, pumps, tur-bines, boilers and com-

pressors intelligently and automatically

17:00 IN01

MG06

PR23

IN28

ED37

EP08 PR22

17:00

Behind the Scenes - System Integrators

are key in our Solution Business


information systems

Introducing WirelessHART with

EtherNet/IP Gateway and Add-On-Profile

Migration Tools to Convert Your Legacy

DCS and PLC5 Systems to the PlantPAx System

18:00 18:00

19:00 Welcome reception and entertainment - Time Square Welcome reception and entertainment - Time Square 19:00

5

Wednesday, 18 October






Grand Ballroom F

Grand Ballroom G

Grand Ballroom H

Grand Ballroom K

Grand Ballroom E

Grand Ballroom M

Grand Ballroom C

Grand Ballroom B

Colombus Avenue 1

Madison Avenue Room



9:00 Keynote Session Keynote Session 9:00

10:00

NS03

MG01

SY07 CL31 CL05 IN04 NS13 VZ04 CL16 VZ08 CL04 PR16 EP07 PR01 Experience Rockwell Automation




products platforms.

10:00

Fundamentals of CIP (EtherNet/IP) Packet

Delivery Process

ThinManager - The Future of Industrial

Mobility

Optimize machine performance

with Kinetix® and PowerFlex® Integrated

Motion solutions



PR32










NEW in v9.0!


Advanced Lab


SequenceManager

The Expansion of Ethernet and Industrial IoT in Manufacturing

PlantPAx System What’s New & What’s Next

11:00

SF13 MG09 CL18 EP09 PR05

11:00

Whats New in Safety? Reality Talks - End User What’s New in Connected Components Workbench™ Software?

Phased Modernization Tools

and Techniques: Modernize on

your Maintenance Budget

Development and Management with the Rockwell

Automation Library of Process Objects


13:00

IN17 MG08 CL12 CL29 CL36 SY08 IN05 VZ09 NS17 IN14 CL06 PR06 EP11 PR09 Experience Rockwell Automation




products platforms.

13:00



Insight View - System Integrator Partner

Program and Value on the Market



Advanced Tips and Trick to reduce development

time and increase machine productivity with new capabilities

in the Studio 5000 and Logix platforms

CL14






Advanced Analytics


and Events



in-Depth Strategy






PlantPAx Process Application

Development

Connecting ControlLogix as an

OPC UA Server

Deploy and Manage a Virtualized

PlantPAx ® System

14:00 NS06

IN03 PR32 EP12 IN37

14:00

Gain meaningful insights to production

by associating multiple data sources


Process OEMs succeed with HART

capability

Dynamix Integrated Condition

Monitoring demo

15:00

NS14 MG10 SF14 NS30 CL10 SY09 IN08 VZ13 SY05 SY15 CL09 PR07 EP13

PR20

Experience Rockwell Automation




products platforms.

15:00

Cybersecurity- Where and Why do I Start?

Forum – System Integrator Program of Rockwell Automation

Scalable Safety Machinery Solutions







Lab



TeamONE Application

Platform: Hands-on Experience

FactortyTalk AssetCentre:

Advanced Lab


Hands-on Experience

Saving Time: Tools to help deploy and maintain a PlantPAx® DCS

STOBER Integrated Servo Geared Motor approach for Kinetix

Systems

16:00

NS15 EP15 IN02 CL35 VZ25 EP16

PR22 16:00

Logix Security for Machine Builders and

End Users

Next Generation Alarming by WIN-911


Analytics in 50PR23


Mobility and Portability with Today’s Rockwell Automation Software

Keeping your Connected

Enterprise ‘Always-On’ in the age of

Virtualisation & IIoT

17:00 17:00

19:30 EDFest - Disneyland Paris EDFest - Disneyland Paris 19:30

6






Grand Ballroom F

Grand Ballroom G

Grand Ballroom H

Grand Ballroom K

Grand Ballroom E

Grand Ballroom M

Grand Ballroom C

Grand Ballroom B

Colombus Avenue 1

Madison Avenue Room



9:00 Keynote Session Keynote Session 9:00

10:00

NS03

MG01

SY07 CL31 CL05 IN04 NS13 VZ04 CL16 VZ08 CL04 PR16 EP07 PR01 Experience Rockwell Automation




products platforms.

10:00

Fundamentals of CIP (EtherNet/IP) Packet

Delivery Process


Mobility



Motion solutions



PR32










NEW in v9.0!


Advanced Lab


SequenceManager

The Expansion of Ethernet and Industrial IoT in Manufacturing


11:00

SF13 MG09 CL18 EP09 PR05

11:00

Whats New in Safety? Reality Talks - End User What’s New in Connected Components Workbench™ Software?

Phased Modernization Tools

and Techniques: Modernize on

your Maintenance Budget




13:00

IN17 MG08 CL12 CL29 CL36 SY08 IN05 VZ09 NS17 IN14 CL06 PR06 EP11 PR09 Experience Rockwell Automation




products platforms.

13:00



Insight View - System Integrator Partner

Program and Value on the Market






CL14






Advanced Analytics


and Events



in-Depth Strategy







Development

Connecting ControlLogix as an

OPC UA Server


PlantPAx ® System

14:00 NS06

IN03 PR32 EP12 IN37

14:00

Gain meaningful insights to production

by associating multiple data sources


Process OEMs succeed with HART

capability

Dynamix Integrated Condition

Monitoring demo

15:00

NS14 MG10 SF14 NS30 CL10 SY09 IN08 VZ13 SY05 SY15 CL09 PR07 EP13

PR20





products platforms.

15:00

Cybersecurity- Where and Why do I Start?

Forum – System Integrator Program of Rockwell Automation








Lab



TeamONE Application



Advanced Lab


Hands-on Experience


STOBER Integrated Servo Geared Motor approach for Kinetix

Systems

16:00

NS15 EP15 IN02 CL35 VZ25 EP16

PR22 16:00

Logix Security for Machine Builders and

End Users

Next Generation Alarming by WIN-911


Analytics in 50PR23


Mobility and Portability with Today’s Rockwell Automation Software

Keeping your Connected

Enterprise ‘Always-On’ in the age of

Virtualisation & IIoT

17:00 17:00

19:30 EDFest - Disneyland Paris EDFest - Disneyland Paris 19:30

7

Thursday, 19 October






Grand Ballroom F

Grand Ballroom G

Grand Ballroom H

Grand Ballroom K

Grand Ballroom E

Grand Ballroom M

Grand Ballroom C

Grand Ballroom B

Colombus Avenue 1

Madison Avenue Room

Discussions Discussions Technical Session Technical Session Technical Session Lab Lab Lab Lab Lab Lab Lab Discussions Lab


8:00

SF15 IN15 SY07 CL31 VZ25 IN04 NS13 VZ04 SY05 IN14 CL04 PR06 EP06 PR01 Experience Rockwell Automation




products platforms.

8:00


Scalable Analytics Overview


Mobility



Motion solutions

IN28

Mobility and Portability with Today’s Rockwell

Software








TeamONE Application





Advanced Lab


Development

Best Practice for Industrial Network

& IoT Design & Deployment


9:00

IN17 VZ01 CL18 CL10 EP10 PR05

9:00



What’s NEW & What’s Next in Visualization at Rockwell Automation

What’s New in Connected Components Workbench™ Software?


Extending The Connected Enterprise



10:00

NS16 VZ01 VZ10 CL29 SY16 SY08 IN05 VZ09 SF01 IN13 CL08 PR07 EP14 PR09 Experience Rockwell Automation




products platforms.

10:00

Deploy Secure Network Architectures for The Connected Enterprise

How to Improve Plant Operations Through Better HMI Graphics




CL14


Independent CartTechnology




Advanced Analytics

- Implementing FactoryTalk® Alarms

and Events





Compliance

Design For Reuse: Increase Your Productivity

With Modular Programming


Fault Tolerant Server - Technical Session showing

fault tolerant server technology


PlantPAx ® System

11:00

IN01 CL11 VZ16 CL10

EPS4 IN37 11:00

Driving Positive Business Outcomes with

Information Solutions

Hazardous Area Applications:

Advantages of intrinsically safe distributed I/O

Designing your HMI for Mobility ED25



13:00

NS07

MG05

CL01 CL36 SY09 IN08 VZ14 NS17 SY15 CL09 CL19

EPS5PR20





products platforms.

13:00

Deploying 802.11 Wireless Networks in Converged Plantwide

Ethernet (CPwE) Architectures







Lab

Advanced Lab for Designing Machine-




in-Depth Strategy


Advanced Lab


Hands-on Experience


14:00

NS09

MG06

SF14 CL14 PR32

EPS8 PR22 14:00

Applying EtherNet/IP Network Features

for High Performance Machine-level Architectures



Overview


16:00 Event closing Event closing 16:00

8






Grand Ballroom F

Grand Ballroom G

Grand Ballroom H

Grand Ballroom K

Grand Ballroom E

Grand Ballroom M

Grand Ballroom C

Grand Ballroom B

Colombus Avenue 1

Madison Avenue Room

Discussions Discussions Technical Session Technical Session Technical Session Lab Lab Lab Lab Lab Lab Lab Discussions Lab


8:00

SF15 IN15 SY07 CL31 VZ25 IN04 NS13 VZ04 SY05 IN14 CL04 PR06 EP06 PR01 Experience Rockwell Automation




products platforms.

8:00


Scalable Analytics Overview


Mobility



Motion solutions

IN28

Mobility and Portability with Today’s Rockwell

Software








TeamONE Application





Advanced Lab


Development

Best Practice for Industrial Network

& IoT Design & Deployment


9:00

IN17 VZ01 CL18 CL10 EP10 PR05

9:00



What’s NEW & What’s Next in Visualization at Rockwell Automation

What’s New in Connected Components Workbench™ Software?


Extending The Connected Enterprise



10:00

NS16 VZ01 VZ10 CL29 SY16 SY08 IN05 VZ09 SF01 IN13 CL08 PR07 EP14 PR09 Experience Rockwell Automation




products platforms.

10:00

Deploy Secure Network Architectures for The Connected Enterprise

How to Improve Plant Operations Through Better HMI Graphics




CL14


Independent CartTechnology




Advanced Analytics

- Implementing FactoryTalk® Alarms

and Events





Compliance

Design For Reuse: Increase Your Productivity

With Modular Programming


Fault Tolerant Server - Technical Session showing

fault tolerant server technology


PlantPAx ® System

11:00

IN01 CL11 VZ16 CL10

EPS4 IN37 11:00

Driving Positive Business Outcomes with

Information Solutions

Hazardous Area Applications:

Advantages of intrinsically safe distributed I/O

Designing your HMI for Mobility ED25



13:00

NS07

MG05

CL01 CL36 SY09 IN08 VZ14 NS17 SY15 CL09 CL19

EPS5PR20





products platforms.

13:00

Deploying 802.11 Wireless Networks in Converged Plantwide

Ethernet (CPwE) Architectures







Lab

Advanced Lab for Designing Machine-




in-Depth Strategy


Advanced Lab


Hands-on Experience


14:00

NS09

MG06

SF14 CL14 PR32

EPS8 PR22 14:00

Applying EtherNet/IP Network Features

for High Performance Machine-level Architectures



Overview


16:00 Event closing Event closing 16:00

9 9

Session Selection Guide

Inspire. Educate. Innovate.Rockwell Automation TechED™ EMEA is the best place to learn the latest technology. You can choose from more than 150 sessions – from beginner level overviews to in-depth, advanced hands-on labs – all while networking with peers throughout the industry.

You must register to attend any of the sessions and labs at Rockwell Automation TechED EMEA. You can do this through the online registration process. To register to attend the event and sessions, visit http://www.rockwellautomation.com/en_UK/events/ra-teched/overview.page?

CONTROL

INFORMATION

MANAGEMENT

NETWORKS & SECURITY

PROCESS

SAFETY

SYSTEM

VISUALIZATION

APPLICATION & CASE STUDIES

Session TracksSessions are organized by their main track and, if applicable, by sub-tracks listed after the session descriptions.

10

CONTROL

CL01 Studio 5000 Logix Designer®: Overview 1 Hour

Want to learn more about Rockwell Software® Studio 5000 Logix Designer® and see how new productivity features can improve your design experience? This session will show how new capabilities enable scalable solutions, efficient project design, effective content management, quicker downtime recovery and collaborative engineering workflows.

CL04 Studio 5000 Logix Designer®: Advanced Lab 2 Hours

So you’ve got the basics, now let’s take it to the next level with this advanced Logix session. This pick and choose lab will allow you to explore topics of interest and quickly see how capabilities add the most value to your design. By the end of this session, you will be on your way to becoming an expert!

CL05 Studio 5000® Application Code Manager: Introduction and Demonstration 1 Hour

This session combines presentation with instructor led demonstration of Application Code Manager (ACM) capability. This session will cover how to quickly build your automation projects using reusable code stored in libraries. See how configuration, not programming is used by selecting library objects (control modules, equipment modules, etc.) and providing configuration data, such as object name and descriptions, equipment setpoints, control interlocks, I/O mapping, etc., required for your project. Once all the configuration, not programming is provided the project will be built (ACD file) which can be downloaded to a controller.

CL06 Studio 5000® Application Code Manager Project Execution and Library Management: Lab 2 Hours

Quickly build your automation projects using the Rockwell Automation Application Code Manager. This lab will provide you the opportunity to create project content by selecting library objects (control modules, equipment’s modules, etc.) and providing configuration data, such as object name and description (i.e. V100, Tank 100 Inlet Valve), equipment setpoints, control interlocks, conditional inclusion (i.e. Has Diagnostics?), etc. Once all the configuration, not the programming, is provided you will initiate a project build (ACD file) that you will be able to download to a controller to run. In addition, this lab will provide you the opportunity to create a new library object that includes Logix, FactoryTalk® ViewSE, FactoryTalk Historian and FactoryTalk Alarms and Event content. Work with ACM Library Designer and Library Object Manager to build and publish library objects into the ACM database. Create highly parameterized library objects for modular reuse and flexibility.

CL08 Design For Reuse: Increase Your Productivity With Modular Programming 2 Hours

Modular programming is a way to increase your productivity by using reusable logic and objects. This session will cover the basics of modular programming from development to deployment. Come see what Rockwell Automation has to offer! The session includes both instructor-led demonstrations as well as hands-on activities.

CL09 CompactLogix® 5380 Controller: Hands-on Experience 1 Hour

Looking for high performance in a small controller form factor? Come experience the scalability of our Integrated Architecture system with the CompactLogix® 5380 controller and Compact 5069 I/O, all presented and navigated using the new PanelView™ 5500 operator interface.

CL10 CompactLogix® 5480 Controller 1 Hour

This session will introduce and demonstrate the capabilities of our new CompactLogix 5480 Controller. Learn the power of Logix and Windows in one controller. This presentation will cover target applications, teaching the value provided by the features.

CL11 Hazardous Area Applications: Advantages of intrinsically safe distributed I/O 1 Hour

Intrinsic safety is a commonly used explosion protection method. This presentation will review key considerations for equipment in hazardous areas and specifically illustrate the advantages of using intrinsically safe 1719 Ex I/O as a solution for explosion protection.

CL12 Smart Devices: Helping Design, Operate and Maintain The Connected Enterprise 1 Hour

Smart devices deliver real time control and information that feeds up through your smart connected plant. This session will give an overview of how our smart ‘edge’ devices help contribute to the success of your operations during the design, operation and maintenance of your operations.

CL14 Integrated Motion on EtherNet/IP: Solution Overview 1 Hour

This session introduces the latest additions to the Integrated Motion on EtherNet/IP product portfolio, and a preview of upcoming products and features. New products that will be highlighted include the ControlLogix® 5580 controller, 5069 Compact I/O™ platform, Kinetix® 5700 servo drives, iTRAK® intelligent transportation system, VPC line of motors, and the PowerFlex® 527 AC drive. A demonstration of the design, configuration, programming, and commissioning of an Integrated Motion on EtherNet/IP system will highlight the key new features of the system.

Session Descriptions

11

CL16 Integrated Motion on EtherNet/IP: Advanced Lab 2 Hours

This hands-on lab showcases how our Integrated Architecture system takes motion to the next level. This session will be based on the new ControlLogix® 5580 controller, 5069 Compact I/O™ and Kinetix® 5700 servo drives and demonstrates how they combine to boost motion performance to unprecedented levels.

CL18 What’s New in Connected Components Workbench™ Software? 1 Hour

Learn about the new features in Connected Components Workbench™ Software which assist in reducing design and setup time of small machine applications, by being able to configure and program multiple devices in the same project. This includes Micro800® Controllers, PanelView™ 800 Graphic Terminals, PowerFlex® Drives and Guardmaster® safety products.

CL19 Connected Components Workbench™ Software Lab 2 Hours

The goal of the lab is to show how Rockwell Automation tools (Connected components Accelerator Toolkit and SDA) can be used to speed up development of a MAS (Micro800) machine. The program generated through this lab will contain the Micro800 project and Panelview800 application, which at the end of the lab will allow the user to control a PowerFlex 525 drive and a Kinetix3 drive in manual mode, from on the PanelView800.

CL29 Advanced Tips and Trick to reduce development time and increase machine productivity with new capabilities in the Studio 5000 and Logix platforms 2 Hours

Studio 5000 and Application Code Manager can dramatically reduce your automation projects development effort. In this session, we will combine eTools, Studio Architect, Application Code Manager as well as new control hardware that will help you achieve both engineering and machine productivity.

CL31 Optimize machine performance with Kinetix® and PowerFlex® Integrated Motion solutions 2 Hours

Experience the scalability of Rockwell Automation’s Drives & Motion control solutions. Optimize system design by using Rockwell Automation’s sizing and selection tools, drive multiplexing capability and programming flexibility. Demonstrate an integrated and flexible approach to functional safety using Controller based Safety with CIP Safety in Drives & Motion control systems. Show the ease of use and strengths of the tuningless commissioning.

CL35 Machine start-up made easy 1 Hour

Discover how new adaptive control features minimize tuning efforts and improve performance of PowerFlex drives and Kinetix servo applications. Enhancements such as load observer, tracking notch filters and gain stabilization will identify load characteristics and intelligently adjust loop gains. Changes to the machine

behaviour over time will be recognized and addressed automatically. These principles will be demonstrated live with smaller scale servo hardware.

CL36 Smart Devices: Helping Design, Operate and Maintain The Connected Enterprise 1 Hour

A demonstration of the Smart Devices capability of E300 Motor Overload, PowerFlex and Kinetix drives, Integrated Safety, Sensors, and RFID. The demonstration shows how diagnostic, warning and fault information from a running machine, can be used to minimize downtime and reconfigure a machine over the network, should it be necessary.

12

Session DescriptionsINFORMATION

IN01 Driving Positive Business Outcomes with Information Solutions 1 Hour

Learn how Information Solutions help to maximize the value of production operations in any industry. New offerings help you connect people, processes, and technology in ways never before possible. Explore how innovative operations management solutions, scalable analytics tools, a collaboration app, and connected services work together in a Connected Enterprise.

IN02 FactoryTalk VantagePoint EMI: Analytics in 50 1 Hour

What kind of analytics are possible within FactoryTalk VantagePoint now that FactoryTalk Historian includes Asset Framework and Event Frames? In just 50 minutes, learn how to perform basic analytics and develop content for mobile devices, tablets or at your desktop with ControlLogix, FactoryTalk Historian, VantagePoint EMI and an information engineer.

IN03 Gain meaningful insights to production by associating multiple data sources 1 Hour

Gaining analytics insights that extend beyond single-equipment performance requires looking at multiple sources of data in a combined way. It’s becoming common for companies to look at manufacturing data combined with safety, product field performance, warranty data, and other non-traditional content. Learn how to build a strategy through actual examples.

IN04 FactoryTalk VantagePoint EMI Lab: Introduction to Analytics 2 Hours

Learn how to take advantage of The Connected Enterprise by integrating and accessing data from Rockwell Automation systems with FactoryTalk VantagePoint EMI. In this introductory lab, you’ll explore the key building blocks and analytic capabilities of FactoryTalk VantagePoint, and build a mobile dashboard using data from FactoryTalk Historian’s Asset Framework.

IN05 FactoryTalk VantagePoint EMI Lab: Advanced Analytics 2 Hours

Learn how to leverage FactoryTalk VantagePoint EMI to turn raw data into actionable information including trends, golden batches and dashboards. This session includes FactoryTalk Historian Asset Framework and Event Frames, SQL CLR, Eventing and SQL Reporting Services, post-SQL processing, SQL-CLR application, model building techniques and others.

IN08 FactoryTalk Historian Site Edition: Advanced Lab 2 Hours

Choose your favorite(s): Topics include configuring Interface Redundancy and Data Buffering, Tools and Methods for Backfilling Data into the Archive, and, new this year, Using Asset Framework and Event Frames for reporting in VantagePoint. Attendees should have a working understanding of FactoryTalk Historian SE to maximize the experience.

IN13 Increase Operational Flexibility With Data-Driven Decisions for Easier Compliance 2 Hours

Smart manufacturers are addressing specific production challenges using fit-for-purpose applications that scale easily for improved ROI and flexible deployment. Learn how the Quality app provides automated information gathering and reporting to help you achieve regulatory compliance, enforce quality standards and easily configure quality recipes and escalation plans.

IN14 Better Manage OEE for More Efficient and Profitable Operations 2 Hours

Smart manufacturers are addressing specific production challenges using fit-for-purpose applications that scale easily for improved ROI and flexible deployment. You will learn how to measure and analyze performance so you can take appropriate corrective action to maximize operations.

IN15 Scalable Analytics Overview 1 Hour

In an Industrial Internet of Things, is your aim to collect data or to gain insight? Learn how FactoryTalk Analytics tools speed time to insight by connecting to and modelling processes, then validating, calculating and presenting actionable insights to key stakeholders at all levels of an organization and operation.

IN17 Health and Diagnostics at Your Fingertips Smart safety Demo using TeamONE 1 Hour

Learn how to apply our analytics appliance to real-world scenarios to diagnose issues and make your engineers more productive. You’ll see how easy and intuitive the product is to use, and have a chance to interact with the Shelby bot built inside!

IN19 Microsoft & Rockwell Automation in Industrial Analytics: Power BI, Machine Learning and BOTs 1 Hour

This session will provide you with a quick overview of several key Microsoft analytics technologies, and how they’re being applied in Manufacturing to address a wide array of challenges. We will also review how these technologies are being integrated into Rockwell Automation’s portfolio and some use cases for them. This will be a joint presentation between Microsoft and Rockwell Automation.

IN28 Operate and optimize your plant with information systems 1 Hour

Visualization features in FactoryTalk View SE and FactoryTalk View ME, including scalability and connection to other products and services.

IN37 Dynamix Integrated Condition Monitoring demo 1 Hour

This demo will show the benefits of an Integrated Architecture approach to Condition Monitoring and highlight the features and functionality of the Dynamix 1444 intelligent IO module.

13

MANAGEMENT

MG01 Digitalization drives New Business Models for Machine Builders, Manufacturers and System Integrators 1 Hour

IoT/Industry 4.0/Digitalization are more than just new technologies. They are creating business model innovation for machine builders and industry sector manufacturers. Just like Uber revolutionized a sleepy personal transportation industry, there will be similar transformations in the industrial space. This industry and technology shift will have an impact on machine builders, manufacturers and also on their relationship with key solution providers like system integrators.

MG02 CSIA - Best Practices drive System Integration Company Excellence 1 Hour

The strength of most System Integrators resides in their technical capabilities whilst management of the organization seems to present a common challenge. The Control System Integrators Association is a global, non-profit professional association with a mission to advance the practice of control system integration for the benefit of their members and their member’s clients. The CSIA Best Practices Manual is a guide to run a successful company. In this presentation, the CSIA CEO will explain how the association operates and a certified CSIA member company will provide testimony of how the Best Practices have allowed their company to grow to their current business.

MG03 Reality Talks - How The Connected Enterprise boosts your Business 1 Hour

This session consist of a panel discussion about The Connected Enterprise and how System Integrators benefit from this in our global and EMEA market. Learn more about The Connected Enterprise Execution Model and how we are looking to further develop and promote The Connected Enterprise Ecosystem with our PartnerNetwork. Hear firsthand from two Solution Partners about their experience within the current market and Rockwell Automation Solution&Services.

MG05 Reality Talks - Best Practice of System Integrators 1 Hour

Three “Best of class” System Integrators present their experience and Best Practice within their Industry. Discussion topics include the support of Rockwell Automation, the System Integrator Partner Program and relevant disciplines.

MG06 Behind the Scenes - System Integrators are key in our Solution Business 1 Hour

Rockwell Automation approaches big customers with its own Solution & Service Business. Explore the conversion from competition into cooperation and see how our joint approach leads to growth in both businesses.

MG07 Behind the Scenes - How to approach the several Industries in today’s market 1 Hour

Learn about Rockwell Automation’s Strategic Account Model as well as the execution of the Segmented Sales Strategy for End Users by industry. Experience in which way the System Integrators of our Partner Network are utilized and can benefit.

MG08 Insight View - System Integrator Partner Program and Value on the Market 2 Hours

Get an insight view on the System Integrator Program of Rockwell Automation and its various aspects. Learn how System Integrators can benefit from the program and how Rockwell Automation and its partners address the needs of their customer in the next Industrial Revolution.

MG09 Reality Talks - End User 1 Hour

Get the key elements of successful cooperation from a System Integrator and an End User

MG10 Forum – System Integrator Program of Rockwell Automation 1 Hour

Learn about the PartnerNetwork, especially the System Integrator Program and how this cooperation can help increase your business. This session will give an overview of the program to prospective PartnerNerwork members, and for current members, it will give them the opportunity to get additional updates and have possibility to feedback.

14

Session DescriptionsNETWORKS & SECURITY

NS03 Fundamentals of CIP (EtherNet/IP) Packet Delivery Process 2 Hours

Have you ever wondered how a CIP packet traverses a switched and routed network infrastructure? This discussion reviews the encapsulation/decapsulation process and network services such as ARP required to successfully deliver a CIP packet across a network infrastructure. A prior understanding of general Ethernet concepts, or attendance of the Fundamentals of EtherNet/IP Network Technology session is recommended.

NS04 Improve Visibility and Diagnostics of your Network with Network Management Software 1 Hour

In this session learn about how the new Network Management Software (NMS) from Rockwell Automation can help improve your industrial network visibility and troubleshooting procedures by providing intuitive network information within context of the automation system designed for the non-IT personnel. Easily discover plant floor assets, automatically create “as-built” topology of managed switches and devices, with live device centric views for real-time configuration. In addition, NMS can monitor the network for alarms, events and audits which are automatically captured and can provide for easy historical analysis. This session combines presentation with an instructor-led demonstration of NMS.

NS06 Deploy Resilient Network Architectures for The Connected Enterprise 1 Hour

Optimization of your plant-wide architecture requires a network infrastructure that is scalable, reliable, safe, secure and future-ready. Learn about the Cisco and Rockwell Automation CPwE resiliency framework and multiple resiliency protocols, including DLR, REP, VSS, StackWise, PRP, and others using Stratix and Catalyst switches. Prior attendance of the Building Converged Plantwide Ethernet Architectures session is recommended.

NS07 Deploying 802.11 Wireless Networks in Converged Plantwide Ethernet (CPwE) Architectures 1 Hour

Plant-wide architectures increasingly use IEEE 802.11 wireless networks for critical Industrial Automation and Control System (IACS) applications. This discussion reviews the wireless LAN (WLAN) design and implementation considerations within the Cisco and Rockwell Automation CPwE architectures. Learn about the CPwE WLAN framework, Unified vs. autonomous WLAN, EtherNet/IP application consideration for wireless media, and Stratix 5100 Access Point (AP) / Workgroup Bridge (WGB).

NS09 Applying EtherNet/IP Network Features for High Performance Machine-level Architectures 1 Hour

This discussion reviews the considerations in successful design and deployment of high-performance EtherNet/IP features such as: Gigabit Ethernet, Direct Device Level Ring (DLR) to meet machine level network topology needs, Network Address Translation (NAT) to enable application code reuse. Discussions

will also include recommendations for architectures that include real-time applications such as motion control and switch selection considerations. A prior understanding of general Ethernet concepts, or attendance of the Fundamentals of EtherNet/IP Network Technology session is recommended.

NS13 Advanced Stratix™ Switch and EtherNet/IP Features in Converged Plantwide Ethernet (CPwE) Architectures 2 Hours

This hands-on lab will cover some of the advanced Stratix switch features such as Network Address Translation (NAT), VLAN segmentation, Connected Routing, and switch resiliency and security. A prior knowledge of the basic EtherNet/IP and Stratix switch features, or attendance of the Basic Stratix and EtherNet/IP lab is recommended.

NS14 Cybersecurity- Where and Why do I Start? 1 Hour

Securing The Connected Enterprise requires a holistic defense-in-depth approach. This discussion will address various system level scenarios with consideration to the attack continuum: prevent, detect, and respond. Attendees will better understand how to best utilize the breadth of solutions offered by Rockwell Automation and our partners. In addition, learn about developing standards and regulations around security and Rockwell Automation’s approach for building security into their products.

NS15 Logix Security for Machine Builders and End Users 1 Hour

Studio 5000 Logix Designer is introducing a new way to control access to selected routines and add-on instructions using software licensing technology. Additionally, FactoryTalk Security can now be used by machine builders and end users to enforce policies for accessing controllers and content. Come and learn about these new capabilities.

NS16 Deploy Secure Network Architectures for The Connected Enterprise 1 Hour

Protecting industrial control and automation system (IACS) assets requires a holistic defense-in-depth security approach, which addresses internal and external security threats. This discussion reviews the security design and implementation considerations within the Cisco and Rockwell Automation CPwE reference architectures. Learn about the architectural security framework, identity services, IDMZ, Stratix 5950 and Cisco Adaptive Security Appliance (ASA) firewall solutions to help you improve the availability, integrity and confidentiality of your network architecture. Prior attendance of the Building Converged Plantwide Ethernet Architectures session is recommended.

15

NS17 Network Security for EtherNet/IP using the Stratix 5950 Security Appliance as a Part of Defense-in-Depth Strategy 2 Hours

With continuing convergence of plant-floor EtherNet/IP and enterprise Ethernet networks, there are opportunities for better business decisions but also challenges associated with cybersecurity. Because of the openness of EtherNet/IP networks, configuration and architectural design must be secured and hardened. Plant-wide deployment of the Stratix 5950 security appliance helps to secure and harden EtherNet/IP networks and creates smaller zones of trust. In this advanced hands-on lab, the Stratix 5950 will be configured to restrict and inspect EtherNet/IP network traffic using Industrial Firewall (IFW) and CIP Deep Packet Inspection (DPI) technologies. Lab content will also review considerations to develop an industrial security policy for plant-wide architectures.

NS21 Cisco: Digital Manufacturing Solutions in Practice 1 Hour

See how Cisco solutions have been implemented around the world to improve asset availability, performance, and quality. Understand the customer challenges experienced through real case studies and how they were overcome to achieve outstanding business outcomes. Converged Plantwide Ethernet (CPwE), Connected Factory, Factory Wireless and other solutions will be covered.

NS30 Gain knowledge of the requirements to implement a plant wide network 1 Hour

This demonstration will review the considerations developed by Rockwell Automation and our partners to help you design and deploy a scalable, robust, secure and future-ready EtherNet/IP network architectures. Topics will include segmentation techniques, security, time synchronization, network resiliency, wireless, diagnostic tools and many others.

16

PROCESS

PR01 PlantPAx System What’s New & What’s Next 1 Hour

In this session, you will hear a brief overview of the PlantPAx® distributed control system. You will then discover the latest release of features. Each feature will be detailed in full including the benefits of the modern DCS approach compared to traditional DCS systems.

PR05 Development and Management with the Rockwell Automation Library of Process Objects 1 Hour

Get your products to market faster using new tools that simplify the creation and deployment of library components. See how some features of the library and new creation tools and graphical configuration tools will help reduce the work required when adding, configuring, and maintaining your application library content. Topics will include deploying library content using enhancements to Logix Designer, as well as new tools available to simplify the customization of that content for your project.

PR06 PlantPAx Process Application Development 2 Hours

In this hands-on lab, we will focus on control and visualization aspects of PlantPAx®DCS. Here you will develop a process application using PlantPAx Process Strategies. Once you have completed the setup of your controller and HMI, you will continue to build out your application by adding and configuring controller code and FactoryTalk® View SE graphical elements from the Rockwell Automation Library of Process Objects v3.5. Come and learn about how PlantPAx 4.0 leverages Studio 5000 Architect, Logix Designer features such as the Logical Organizer and Program Parameters and FactoryTalk View Se features such as Alarm grouping and Alarm Roll-up.

PR07 Saving Time: Tools to help deploy and maintain a PlantPAx® DCS 2 Hours

In this hands-on lab, we will focus on the use of the PlantPAx®Alarms Builder and Tag Data Edit Tool. In performing this lab, you will gain additional experience with techniques that improve productivity and efficiencies in process application development. Come and learn how this tool saves you time, helps you decrease errors and helps you promote consistency to your customers and users.

PR09 Deploy and Manage a Virtualized PlantPAx ® System 1 Hour

Virtualization has become a clear path towards increasing the life of your control system and facilitating your ability to maintain it and secure it. Additionally, the ability to confidently deploy a virtualized PlantPAx system is increasingly important as we look for ways to optimize computing resources and increase system uptime. In this session you will learn about how to deploy and manage a complete virtualized PlantPAx system using the PlantPAx Virtual Image Templates, VMWare vSphere and the proper Microsoft and Rockwell Automation licenses. We will

review available tools and documentation as we deploy a demo system and address common concerns surrounding this great technology. This session is designed to help you consider a virtual architecture as you approach your next control system deployment.

PR15 Enhance Operating Effectiveness with New FactoryTalk Batch View and eProcedure 2 Hours

Modern batch systems provide for new flexibility and improved workflows through intuitive, dynamic interfaces. Learn new ways to increase operational flexibility through the new mobile enabled FactoryTalk Batch View™ offering from Rockwell Automation. Setup and use the new FactoryTalk Batch View™ product to control batches, change active steps, and perform manual instructions through eProcedure.

PR16 Controller Based Batching Using SequenceManager 2 Hours

Modern Batch systems must account for the growing need for architecture flexibility, true distribution of control, and scalable solutions. SequenceManager™ provides batch sequencing in the Logix family of controllers, adding power capability closer to the process, and opening new possibilities for skids, off network systems, and single unit control. This session will allow you to configure and run SequenceManager in Logix Designer, ViewSE, and deploy batch reports.

PR20 Real Time Energy Optimization: dispatch chillers, pumps, turbines, boilers and compressors intelligently and automatically 1 Hour

FactoryTalk Analytics®’ Real Time Optimization uses equipment models trained to match your plant automatically to select what units to run and how hard to meet your utility demand at minimum cost. This unique analytics product includes data reconciliation to manage missing or imperfect measurements, demand forecast models to calculate optimal dispatch over time avoiding too-frequent start or stops, and current pricing forecast as available to run equipment to a true optimum within operating limits. With very powerful optimization capabilities, automated scheduled model retraining means it is installed once fairly simply and takes care of itself over its lifecycle. There is nothing like this on the market to assure the right answer, over time to minimize energy costs with achievable targets at a centralized utility plant. It’s been deployed in both open- and closed-loop optimization solutions and tends between a 10-30% specific energy savings depending on decision complexity and optimization compliance.

PR22 Migration Tools to Convert Your Legacy DCS and PLC5 Systems to the PlantPAx System 1 Hour

Are today’s optimization and innovation demands hampered by your old process control system? Is support for your legacy DCS diminishing? This session will explore the advantages of migrating your legacy DCS or PLC5 – systems to the PlantPAx system. You will learn about tools that are available from


17

Rockwell Automation that can help you migrate your systems at a pace that’s comfortable for you.

PR32 High Availability in Process Control Systems 1 Hour

Configuration and demo of redundant I/O, Networks, controllers and software. Complete high availability solution.

SAFETY

SF01 Advanced Programming Techniques for Integrated Safety Applications 2 Hours

Complex control applications involving safety, discrete, motion, information, and other disciplines are often best addressed using integrated programmable automation control systems. This lab will review considerations and advanced techniques for programming integrated programmable automation control systems (GuardLogix) to address safety and productivity issues.

SF13 What’s New in Safety? 1 Hour

Learn about the latest safety product portfolio expansions from the Global Market leader in Safety including 450L light curtains, Lifeline 5, 5380 Compact GuardLogix, 5580 GuardLogix, 5069 Compact Guard I/O, Advanced Safety in K5700 and GuardLink

SF14 Scalable Safety Machinery Solutions 1 Hour

In this demonstration we will present scalable safety solutions, demonstrate the use of High Integrity Add on instructions and show how to optimize development time using the Safety Accelerator Toolkit to produce safe, compliant and reliable safety solutions across all machine platforms.

SF15 Machinery Safety Standards and Trends 1 Hour

This session will provide an update on changes and trends to Machinery Safety Standards including Robotics and security

18

SYSTEM

SY05 TeamONE Application Platform: Hands-on Experience 2 Hours

This interactive session will introduce and give first-hand experience of key features in the new FactoryTalk TeamONE application platform. See how the ‘App’ can help drive better team collaboration, monitor critical alarms and events, access latest device trends and gain insight through real-time analytics. This is a ‘BYOD’ session so bring your own device and download the FactoryTalk TeamONE App before hand to get the most from the session.

SY07 ThinManager - The Future of Industrial Mobility 1 Hour

We are very excited about bringing Automated Control Products (ACP) into the Rockwell Automation family. As proven in the market, ACP makes PlantPAx Systems better by providing centralized thin client, remote desktop and server management software that improves customer productivity and brings monitoring and mobility solutions to the plant floor. They are the ketchup to our hamburger, making our solution more valuable to our customers.

SY08 ThinManager - Experience the Platform’s Power and Simplicity: Basic Lab 2 Hours

This lab introduces the primary building blocks of the ThinManager platform while demonstrating its ease of use and flexible content delivery options within a FactoryTalk environment. This session includes hands on training with Rockwell’s latest industrial grade box thin client, the VersaView 5200.

SY09 ThinManager - From New Server to Completed Deployment: Advanced Lab 2 Hours

This lab will start with a fresh Windows Server 2012 R2 build and work through all of the steps necessary, including installing and configuring Remote Desktop Services, to build a complete ThinManager deployment. Along the way, you will also be introduced to some advanced ThinManager features. Note: ‘ThinManager Basics Lab’ is a prerequisite for this lab

SY15 FactortyTalk AssetCentre: Advanced Lab 2 Hours

Attendees can choose FactoryTalk AssetCentre topics that are of the most interest in a free form environment. Available topics include: what’s new with Asset Inventory and Mobile Client technology, capturing and reporting on diagnostics from FactoryTalk View, version control of project files, designing a security model, configuration and implementation of a disaster recovery strategy, and the maintenance and configuration of process instrumentation.

SY16 MagneMotion & iTRAK - Independent Cart Technology: Introduction 1 Hour

Independent cart technology is up-ending traditional motion control paradigms and Rockwell Automation is leading the industry with this new breed of motion control systems. Come learn about how these solutions will be cornerstones in the factory of the future allowing unprecedented flexibility and speed on machines, without increasing machine size.

19

VISUALIZATION

VZ01 What’s New & What’s Next in Visualization at Rockwell Automation 1 Hour

Discover the newly released features of Visualization software and what’s ahead for the upcoming year. This session will show how new capabilities enable scalable solutions, efficient product design, access to real-time information, and improve operator effectiveness.

VZ04 Advanced Lab for Machine-level HMI with FactoryTalk View Machine Edition and PanelView Plus 7 2 Hours

If you are an experienced FactoryTalk® View Machine Edition application developer, this session allows you to pick-and-choose from subjects related to more advanced capabilities. Topics include: designing reusable faceplates and global objects, working with Logix Extended Tag properties and run-time language switching, applying ActiveX controls in an application, and creating a context-sensitive alarm system. Suggested experience with FactoryTalk® View and PanelView™

VZ08 FactoryTalk View Site Edition: What’s NEW in v9.0! 2 Hours

If you are an experienced FactoryTalk® View Site Edition application developer, this lab session focuses on the features of latest release, FactoryTalk View 9.0. The topics will give you hands-on instruction for topics such as: TrendPro, RecipePro+, ControlLogix Extended Properties, Alarming enhancements, Graphics and animation, and Mobility enhancements. Suggested experience with FactoryTalk® View

VZ09 Implementing FactoryTalk® Alarms and Events 2 Hours

A robust alarming capability is critical to any HMI system. The alarm system in FactoryTalk® View Site Edition, FactoryTalk® Alarms and Events, delivers industry-leading capabilities for any size system. This hands-on lab focuses on how to best implement and configure FactoryTalk® Alarms and Events with FactoryTalk® View Site Edition and Logix Controllers. Then users will explore how to leverage the data analytic capabilities of FactoryTalk VantagePoint to bring alarm data from a controller to the information layer making the Enterprise truly Connected.

VZ10 How to Improve Plant Operations Through Better HMI Graphics 1 Hour

Plant operators are required to make decisions everyday in production facilities which can directly influence profitability, either by the normal running of the plant or by reacting swiftly to the unusual, protecting material, product, equipment and personnel. These decisions need to be based on clear information from your visualization systems. Learn how to produce graphics that deliver meaningful and detailed information so operators can run the plant at the most efficient level. Also learn what graphic designs work best at keeping your plant operatives informed of the plant status at a glance to enable them to make those right decisions.

VZ13 Introductory Lab for Designing Machine-level HMI with PanelView™ 5500 and Studio 5000 View Designer™ 2 Hours

Learn how easy it is to create, download, and run a PanelView™ 5500 project using the new Studio 5000 View Designer™ software. This lab will introduce you to topics such as setting up a project, creating screens, animating graphic elements, setting up navigation, setting up basic security, taking advantage of pre-defined project content, and downloading to a terminal.

VZ14 Advanced Lab for Designing Machine-level HMI with PanelView™ 5500 and Studio 5000 View Designer™ 2 Hours

Learn how to take advantage of more powerful, advanced capabilities of the new PanelView™ 5500 terminals and Studio 5000 View Designer™ software. Topics you’ll explore include creating re-usable screens, using custom press/release actions, customizing pre-defined project content, using advanced features of state tables, configuring high-speed HMI buttons, and configuring custom element-based security. You will also learn about new features released late last year including creating your own custom Toolbox elements using Add-On Graphics and showing content in multiple languages using runtime language switching. Suggested prerequisite: VZ13 - Introductory lab for designing machine level HMI with PanelView™ 5500 and Studio 5000 View Designer™.

VZ16 Designing your HMI for Mobility 1 Hour

Thinking about taking your HMI mobile? Come experience FactoryTalk ViewPoint on your mobile device! Make your operators more productive by providing an interface for status indicators, machine control, data trends, and alarm information! In this session, let’s discuss the options for mobile application design and the best practices for designing your mobile graphics.

VZ25 Mobility and Portability with Today’s Rockwell Software 1 Hour

Ease of making mobility reports. Rescale of iPad, iPhone and windows formatting. ViewPoint comparison.

20

APPLICATION & CASE STUDIES

EP01 Interface and Workflow between EPLAN and Rockwell Automation Studio 5000 Designer 1 Hour

demonstrating the interface and workflow of EPLAN P8 software to the Rockwell Automation Studio 5000 Designer via the Rockwell Integrated Architecture Builder (IAB) software solution.

EP02 Discover another wireless access solution from HMS with the Anybus Wireless Bolt 1 Hour

The Anybus Wireless Bolt connects machines and devices to wireless networks. Onto cabinets or machines it enables wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN. It communicates on its wired side over Industrial Ethernet, supporting numerous protocols (EtherNet/IP,TCP/IP, UDP).

EP03 Why you should offer integrated stepper motors to your customers 1 Hour

Increased demand for lower order volumes and mixed supply call for fast format changes. Stepper motors are strong and can be used without gear. JVL’s integrated “stepservo” stepper motors have absolute multiturn encoder and 2-port Ethernet/IP switch for easy daisy chain communication lines.

EP04 Integrate the mg in special machines and automate the weighing of tanks 1 Hour

Focus 1 : Integration of very high precision (mg) modules for machine manufacturers Focus 2 : Recommendation and feasibility of tank weighing for automated systems

EP05 A remote solution for an easy integration of Rockwell PAC in Profibus DP Networks 1 Hour

The SST-PB3-REM module with his unique remote module concept offers the same features of an in-chassis module but can reduce expensive PROFIBUS cabling costs when used in environments where controller and field devices are away from each other

EP06 Best Practice for Industrial Network & IoT Design & Deployment 1 Hour

Learn the importance of the underlying network infrastructure for industrial automation and IoT leading to industry 4.0. What are the necessary elements of its design – both logical architecture and physical deployment and its operational efficiency gains.

EP07 The Expansion of Ethernet and Industrial IoT in Manufacturing 1 Hour

Industrial IoT is accelerating the transition of traditional automation networks to Ethernet. Learn what are the technical and organizational challenges, and initial preparation steps that manufacturing companies identify as important to understand for a successful transition.

EP08 Introducing WirelessHART with EtherNet/IP Gateway and Add-On-Profile 1 Hour

WirelessHART is the only wireless standard approved for the process industry. This presentation will give an overview of the new WirelessHART technology and introduce the WirelessHART Ethernet/IP gateway and how it integrates into ControlLogix.

EP09 Phased Modernization Tools and Techniques: Modernize on your Maintenance Budget 1 Hour

Sustaining operations of your existing system is critical to maintain profitability. Learn how ProSoft Technology can help extend the life of your existing Remote I/O network by upgrading existing drives, PanelViews and FLEX™ I/O adapters to EtherNet/IP™ with minimal scheduled downtime and without modifying the PLC code.


21

EP10 Extending the Connected Enterprise 1 Hour

Getting data from your devices can help you make decisions to improve your profits. Oftentimes, you will find that the devices you are using do not have an EtherNet/IP™ interface. Learn how you can increase productivity and efficiency in your control system application by extending the Connected Enterprise to EtherNet/IP and non-EtherNet/IP devices

EP11 Connecting ControlLogix as an OPC UA Server 1 Hour

OPC UA background - Main differences with OPC ControlLogix connection via OPC UA Server module - Module characteristics including advanced data support (UDTs etc.) - OPC Foundation certification Set-up/configuration of system with live screen shots Considerations on the OPC UA Client with examples

EP12 Process OEMs succeed with HART capability. 1 Hour

Arming customers with real-time data from their process activities makes them more efficient and cost effective. By enabling the ability to do proactive maintenance with important process information, customers can eliminate unforeseen downtime.

EP13 STOBER Integrated Servo Geared Motor approach for Kinetix Systems 1 Hour

In a demanding application, integrated servo geared motors from STOBER can help to change the machine design paradigm. For high performance applications that are tight on space, tight on weight, or need something more dynamic, an integral package can open doors.

EP14 Fault Tolerant Server – Technical Session showing fault tolerant server technology 1 Hour

An in-depth look into fault tolerant server technology. See live how a fault tolerant server works and ask our speaker every question you always wanted to ask – from lockstep mode and mirroring, to automatic firmware downgrades and automated spare part ordering.

EP15 Next Generation Alarming by WIN-911 1 Hour

Introduction to our next generation alarm notification solution - new license levels, new smartphone apps, as well as how we are uniquely integrated into FTAE. Configuration, deployment, & management of our next generation software will be covered.

EP16 Keeping your Connected Enterprise ‘Always-On’ in the age of Virtualization & IIoT 1 Hour

Learn the value of fault tolerant server solutions and how these are differentiated from server clusters or standard failover solutions. Automazioni Industriali Capitanio will share how Stratus delivers operational simplicity and continuous availability for their customers running Rockwell Automation’s software applications, especially in virtualized environments.

Publication RATE-BR001A-EN-P – June 2017 Copyright ©2017 Rockwell Automation, Inc. All Rights Reserved.

5069 Compact I/O, Allen-Bradley, Arena, CENTERLINE, CompactLogix, Connected Components Workbench, ControlFLASH, ControlFLASH PLus, ControlLogix, E300, Encompass, eProcedure, FactoryTalk, FactoryTalk Analytics, FactoryTalk Alarms and Events, FactoryTalk EnergyMetrix, FactoryTalk Historian, FactoryTalk ProductionCentre, FactoryTalk Services Platform, FactoryTalk VantagePoint, FactoryTalk View Machine Edition, FactoryTalk View Site Edition, GuardLogix, Guardmaster, Integrated Architecture, IntelliCENTER, iTRAK, Kinetix, MagneMotion, MagneMover, Micro800, MicroLogix, MobileView, OptiSIS, PanelView, PartnerNetwork, PlantPAx, PLC-5, PowerFlex, ProposalWorks, RAPID Line Integration, Rockwell Automation, Rockwell Automation TechED, Rockwell Software, RSLinx, RS View, SLC, Stratix, Stratix 5700, Stratix 8000, Studio 5000, Studio 5000 Architect, Studio 5000 Logix Designer, Studio 5000 Logix Emulate, Studio 5000 View Designer, TeamONE and TotalFORCE are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

EUROPE, MIDDLE EAST, AFRICA

Publication RSTE-BR002F-EN-P – May 2017 Copyright ©2017 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.Supersedes Publication RSTE-BR002E-EN-P – June 2016

5069 Compact I/O, Allen-Bradley, Arena, CENTERLINE, CompactLogix, Connected Components Workbench, ControlFLASH, ControlFLASH PLus, ControlLogix, E300, Encompass, eProcedure, FactoryTalk, FactoryTalk Analytics, FactoryTalk Alarms and Events, FactoryTalk EnergyMetrix, FactoryTalk Historian, FactoryTalk ProductionCentre, FactoryTalk Services Platform, FactoryTalk VantagePoint, FactoryTalk View Machine Edition, FactoryTalk View Site Edition, GuardLogix, Guardmaster, Integrated Architecture, IntelliCENTER, iTRAK, Kinetix, MagneMotion, MagneMover, Micro800, MicroLogix, MobileView, OptiSIS, PanelView, PartnerNetwork, PlantPAx, PLC-5, PowerFlex, ProposalWorks, RAPID Line Integration, Rockwell Automation, Rockwell Automation TechED, Rockwell Software, RSLinx, RS View, SLC, Stratix, Stratix 5700, Stratix 8000, Studio 5000, Studio 5000 Architect, Studio 5000 Logix Designer, Studio 5000 Logix Emulate, Studio 5000 View Designer, TeamONE and TotalFORCE are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Connect with us.Connect with us.

#ROKTechED

Session Selection Guide - aicnet.it · Studio 5000® Application Code Manager: Introduction and...

Documents

Transcript of Session Selection Guide - aicnet.it · Studio 5000® Application Code Manager: Introduction and...