SentinelLogManager Day1 2 Install and Configuration
-
Upload
ryan-belicov -
Category
Documents
-
view
229 -
download
0
Transcript of SentinelLogManager Day1 2 Install and Configuration
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
1/13
Installation
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
2/13
Novell, Inc. All rights reserved.2
System Requirements for LogManager Server
Requirements Sentinel Log Manager (2500 EPS) Sentinel Log Manager (7500EPS)
Compression Up to 10:1 Up to 10:1
Devices * 250 750
CPU 1 x Intel* Xeon* E5450@3 GHz (4core CPU)or2 x Intel* Xeon* L5240@3 GHz (2core CPU)
2 x Intel* Xeon* [email protected] (4core CPU)
Max EPS 2,500 7,500
Random AccessMemory(RAM)
4 GB 8 GB
Storage 2 x 1 TB - 7.2k RPM (Hardware with256 MB cache, RAID 1)
6 x 450 GB, 15k RPM drives,(Hardware RAID with 512 MBcache, RAID 5)
Sentinel Log Manager is certified to run on 64-bit SUSELinux Enterprise Server 11.
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
3/13
Novell Inc. All rights reserved
3
System Requirements for CollectorManager
The Collector Manager is supported on the following platforms:
SUSE Linux Enterprise Server 11 (32-bit and 64-bit)SUSE Linux Enterprise Server 10 SP2 (32-bit and 64-bit)Windows* 2003 (32-bit)
Windows Server* 2008 (64-bit)
These are the minimum requirements for the Collector Managerinstaller.
1x dual core256 MB RAM
1 GB - required disk space.
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
4/13
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
5/13
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
6/13
Novell, Inc. All rights reserved.6
Lab Exercise
Root install
From the command line enter the command below in /root
> tar xfz /srv/software/sentinel_log_mgr_1.0_x86.tar.gzsentinel_log_mgr_1.0_x86/setup
> sentinel_log_mgr_1.0_x86/setup/root_install_all.sh
/srv/softwaresentinel_log_mgr_1.0_x86.tar.gz Hotfix
From the command line
> su - novell
> unzip /srv/software/SENTINEL_LOG_MANAGER_1.0.0.0_04.zip> cd SENTINEL_LOG_MANAGER_1.0.0.1_04
> ./service_pack.sh
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
7/13
Novell, Inc. All rights reserved.7
Lab exercise appliance install
Start SLM image in VMware Player
Configure Appliance
Hostname: slm, Domain: ism.utopia.novell.com
Statically assigned IP Address: 172.17.2.97, Subnet:255.255.255.0
Nameserver: 172.17.2.2
Default Gateway 172.17.2.2
Point your browser athttps://172.17.2.97:8443/novelllogmanager/
Login as admin with password password
https://172.17.2.97:8443/novelllogmanager/https://172.17.2.97:8443/novelllogmanager/ -
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
8/13
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
9/13
User Administration
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
10/13
Novell, Inc. All rights reserved.10
Managing Users
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
11/13
Novell, Inc. All rights reserved.11
Adding a User
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
12/13
Novell, Inc. All rights reserved.12
Lab Exercise
Create User accounts
Admin user
Audit user
Report user
Login with using different accounts
View the different of the accounts
-
7/28/2019 SentinelLogManager Day1 2 Install and Configuration
13/13