The round top of the Sensa radiator is unique. Quinn Radia­tors is the sole producer of this radiator from a single folded pressed panel.

The smooth rounded top does not have a sharp vertical weld seam making it a natural choice in the home or office. Furthermore this type of radiator is available without con­vection fins for optimal hygiene, making the Sensa radiator an ideal solution for use in schools, hospitals, healthcare centres or nursing homes.

The Sensa radiator in RAL9016 has the highest heat emis­sion on average per m2 on the market. The excellent yield is possible because of the unique concept of pressing the panels. By using narrower (25mm) and more closely ar­ranged water channels, more convection fins can be at­tached to the panels. These are welded directly to each water channel, which causes an exponential increase of heat emission. Furthermore, relatively little water runs through the narrow water channels . The radiator heats up faster and consequently more rapidly emits heat to the en­vironment. In addition the welded hanging brackets gua­rantee a more discrete hanging profile on installation. (Incl . supplied L-consoles, air vent and blank).

In other words: a smaller radiator, heats the same space.

~"':::S.

\!; BAGUV

(A [!I' .•. ,, ... '""" 'V' V. & E~cv-~•""" BSEN442

KM507661

CE 2006

The standard colour for Quinn panel radiators is RAL9016 .

n RAL9016

Included with the original design of these radiators, Quinn also offers unrivaled quality.

Our radiators are tested at nationally and internationally acknowledged laboratories and are approved in accor­dance with BS EN442, CE, NF and Kite mark.

Quality assurance is backed with Quinn 10-year warranty!! (See terms and conditions)

10 year

warrantY

OuJNN~radiators

panel radiators

OuJNN~radiators

Bracket locations

Type 10, 20, 21 , 22 and 33 (rear view)

Le ngth ( mm)

400

~

9 I c:::p

~

i i

i i ~

cp cp ~

soo

600

700

800

900

HI I H2 I 1000

1100

1200

1400

1600

~

9 9 9 1800

2000

~

i i i I I I

~

2200

24 00

c::6 c::6 c::6 2600

I I I :;: 2800

HI I H2 I Hl I 3000

Type 11 (rear view)

Le ngth ( mm)

400

~

9 I c:::p

~

i i

i i ~

cp cp :;:

soo

600

700

800

900

HI I H2 _I 1000

1100

1200

1400

1600

~

9 9 9 ~

i i i I I I

~

1800

2000

2200

2400

c::6 c::6 c::6 2600

I I I :;: 2800

HI I H2 I Hl I

A H1 H2

39S 122,S 1SO

49S 122,S 2SO

S9S 122,S 3SO

69S 122,S 4SO

79S 122,S sso

89S 122,S 6SO

99S 122,S 7SO

109S 122,S 8SO

119S 122,S 9SO

139S 122,S 11SO

1S9S 122,S 13SO

179S 122,S 77S

199S 122,S 87S

219S 122,S 97S

239S 122,S 107S

2S9S 122,S 117S

279S 122,S 127S

299S 122,S 137S

A H1 H2

39S 13S 12S

49S 160 17S

S9S 160 27S

69S 160 37S

79S 160 47S

89S 160 S7S

99S 160 67S

109S 160 77S

119S 160 87S

139S 160 107S

1S9S 160 127S

179S 160 7SO

199S 160 8SO

219S 160 9SO

239S 160 10SO

2S9S 160 11SO

279S 160 12SO

H3 QTY

4

4

4

4

4

4

4

4

4

4

4

77S 6

87S 6

97S 6

107S 6

117S 6

127S 6

137S 6

H3 QTY

4

4

4

4

4

4

4

4

4

4

4

72S 6

82S 6

92S 6

102S 6

11 2S 6

122S 6

panel radiators

He ig ht M ( mm)

300 10S

400 20S

soo 30S

600 40S

700 SOS

900 70S

Heig ht M ( mm)

300 10S

400 20S

soo 30S

600 40S

700 SOS

900 70S

OuJNN~radiators

Side views

Type 10 Type 11 Type 20

54 32,5 50 26 71 26 r----r- ---

36 36

I

Type 21 Type 22

71 26 107 26 -36 r 36

panel radiators

Type 33

1655 26

36

---;j'~ r ~~

--;j'~ ~ ~

' --;j'~ ~~

lfR\ ~ ~

t- I--

1:11 ~ V

I I V I I

V V

V ~~ ~~ ~ ~

V - I--

~ 62 ..._______

50 72

H 300 400 500 600 700 900

HI 253 353 453 553 653 853

All dimensions are in mm.

Floor brackets Description Height Quantity Art. nr.

Floor bracket 400mm 300mm 400mm TFC04

Floor bracket 600mm 300mm 400mm 500mm - 600mm TFC06

Floor bracket 700mm 400mm 500mm - 600mm -700mm TFC07

Floor bracket BOOm m 400mm 500mm - 600mm -700mm TFCOS

Floor bracket llOOmm 500mm - 600mm -700mm -900mm TFCll

Standard model TFCSETS

Type 10

j Roorbrad<et

Type 11 ~ Roorbrad<et Type 20 TFCS ETS TFCSETS

Suspension brackets Type L

~

it

I I

~~ V

- I--

62 ..._______ 72

1 TFC04 -TFC06- TFC07- TFCOB · TFC11

Roorbrad<et Type 21 TFCSETS ~

- V

~ l:ilv

/ I I

V

/ / V

-~ ~

- 1<!-

BO BO - --------90 90

TFCSETS

Roorbrad<et Type 22 ~ Roorbrad<et

TFCSETS TFCSETS

These metal suspension brackets (1.5mm thickness) are a standard accessory for all panel radiators (1). Type 10 radiators are supplied with wider brackets (2). This makes it pos­sible for these radiators to be fixed to the wall at the same position as Type 11 radiators.

Assembly condition for suspension brackets Type L: installation of the brackets on the lugs is done by preference between the waterways and not against them. The brackets come equipped with a plastic insert that muffles sound and absorbs shocks (3). Anti-lift devises (4) can be ordered optionally. These prevent the upward movement from light types of radiators combined with plastic pipes.

Brackets Brackets Type L Type L (all types (typelO) except typelO)

Height (mm) Quantity Art. nr. Art. nr.

300 BRXX30012 BR1030015

400 BRXX40012 BR1040015

500 BRXX50012 BR1050015

600 BRXX60012 BR1060015

700 BR3370015 BR1070015

900 BR3390015 BR1090015

OuJNN~radiators

I I

Model rev1ew

'E 5 VI

2 c Q) u c 0

:;::; u Q) c c 0 u c Q) Q)

'E ~ Q)

5 _o Q)

~ u c £ 2 "' ·c;; VI

I i:5 11 11

CO 0

300 253 w kg L n

400 353 w kg L n

500 453 w kg L n

600 553 w kg L n

700 653 w kg L n

900 853 w kg L n

w = Heat em ission in Watts kg ; Weight L ; Water content n ; Coefficient

TYPElO

317 6,22 1,70 1,3369

420 8,02 2,19 1,3306

520 9,83 2,69 1,3244

617 11,64 3,19 1,3181

709 13,44 3,68 1,3118

883 17,05 4,68 1,2992

Above data calculated per meter radiator length at 75/65/2o•c in accordance with EN 442.

Possible connections

V __,.

TYPEll TYPE 20 TYPE 21

564 577 847 8,53 12,01 14 ,33 1,70 3,39 3,39 1,3459 1,3002 1,3043

733 730 1067 11 ,44 15,62 19 ,04 2,19 4,39 4,39 1,3309 1,2994 1,3142

890 876 1270 14,35 19,23 23 ,75 2,69 5,38 5,38 1,3160 1,2986 1,3242

1036 1016 1460 1 7,26 22,85 28,47 3,19 6,38 6,38 1,3010 1,2978 1,3341

1172 11 51 1637 20,16 26,46 33 ,18 3,68 7,37 7,37 1,3182 1,2970 1,3455

1413 1480 1959 25,98 33,68 42,61 4 ,68 9,36 9,36 1,3526 1,2953 1,3682

V B ,--------------., V

~~--------~B B~----------~ __,. __,.~----------~ __,.

v ~ v,---------------s

~ B ~~----------~

V = Vent I B = Blind

TYPE 22

111 5 16,92 3,39 1,3065

1406 22,73 4 ,39 1,3219

1681 28,55 5,38 1,3374

1943 34,36 6 ,38 1,3528

2192 40,18 7,37 1,3620

2660 51,81 9,36 1,3805

V

panel radiators

TYPE 33

a

f- a

1635 25 ,27 5,09 1,3162

2087 33 ,99 6 ,58 1,331 5

2494 42 ,71 8,07 1,3469

2857 51,44 9,56 1,3622

3180 60,16 11 ,OS 1,3708

3715 77 ,61 14,04 1,3881

B~--------~

OuJNN~radiators

Types The Quinn Sensa radiator is available in type 10, 11, 20, 21, 22 and 33.

Paint Quinn uses a painting procedure that is used in the car in­dustry. All Quinn radiators have been fully treated against rust.

Firstly, they are degreased. Then a water-based electropho­retic base coat is applied . After this, the radiators are enamelled with an epoxy polyester powder, reference RAL 9016. The total thickness of the paint coat is at least 60 microns. This painting procedure protects the radiators against rust, damage and scratching .

Colour Our standard final coat is the semi-shining RAL 9016 (white) in epoxy-polyester powder.

Heat outputs The heat outputs from the Quinn Sensa radiator vary be­tween 127W and 5944W - at ~TSO (75/65/20°C following EN 442), dependent on the dimensions and the type.

Heights The Quinn Sensa radiator is available in heights from 300mm to 900mm.

Widths The different widths go from minimum 400mm to maxi­mum 3000mm.

Tolerance in dimensions All dimensions have a tolerance in compliance with the EN 442-2 standard .

Accessories The included brackets Type L are easily accessible from the outside of the packaging and guarantee a discrete moun­ting . Air vent and blank are included inside the packaging .

Materials

panel radiators

The Quinn Sensa radiators are manufactured from high quality cold rolled steel.

Working pressure All radiators are pressure tested at 13 bar and are suitable for a working pressure up to 10 bar. The maximum water temperature is 90°C (according to the EN 442-2 standard)

Steel thickness All Quinn radiators are produced with high quality cold rolled steel following the EN 442-1 norms. Quinn guaran­tees a minimal thickness of the steel of 1.25mm for a fin­ished radiator. The thickness of the steel adds up to 1.19mm. The radiator is finished with a paint layer of minimum 60 microns (RAL9016), ensuring the total thickness of the ra­diator plates is minimum 1.25mm.

Connections All radiators are supplied with 4 x Y2" connections.

Packaging In order to avoid any damage during transport and storage, the four sides of each radiator are protected with card­board . The packaging contains a complete assembly kit, which ensures an easy and quick installation.

lt is not necessary to remove the packaging for installation. Therefore the risk of damaging is extremely small.

Warranty The fabrication of Quinn radiators is realised in accordance with the ISO 9001 standards . We offer a 10-year guarantee. The heat emissions were determined in accordance with the EN 442-2 standard (base 75/65/20°C). All radiators have been tested and approved by renowned institutes.

Notice The base should be suitable to support the weight of the radiator and should be checked by a qualified professional/ engineer/architect.

Quinn Group Belgium NV maintains the right to change any of its products' technical characteristics at any time and without prior notification. Quinn Group Belgium NV will not be held responsible for any printing errors. For terms of sale www.quinn - radiators.net QUINN GROUP BELGIUM NV LEAFLET- ENGLISH VERSION© COPYRIGHT 2015 All RIGHTS RESERVED- PRINTED IN BELGIUM 01/2015

YOUR WHOLESALER: Quinn Group Belgium NV Van Doorne laa n 2A B-244 0 Gee l t e l. : 0032 (0) 14 50 00 11 fa x: 0032 (0) 14 50 75 69 w eb : www.q u inn- radi at ors.n et

ne zo-o1-1s 1!1~1!1 ~ ~g

OuJNN~radiators