Semiconductor/ RF device - genesem.com
Transcript of Semiconductor/ RF device - genesem.com
www.genesem.com
Test handler & tape/ reelTest Handler System
• Handling packages: Logic semiconductor packages
• Handling device size: 2x2 ˜50x50
• Interface type: DIO, GPIB, RS-232C
• Throughput:3,500 ˜ 5,500 UPH
• Test methods: Bottom pin direct lead contact type
• Test integration: O/S tester or logic tester system
• Vacuum: Built-in vacuum generator
• Device conversion time: <10 mins
• Plug-in accuracy (position accuracy: +/-0.05mm
• Plunger pressure control: Electrical regulator type
• Docking type: hard lock type and vertical docking plane
• Optional item : Hot plate & picker rotator
* Model : 4para / 16para / 32para type
Items Competitors Genesem type Remarks
Tray elevator Air cylinder Servo motor Prevent package bouncing in trayTray loading No lift, clamp Tray clamp (4 side) Can handle and lift base warpaged trayTray unloading No tray pusher Tray pusher Enable output picker place devices in the tray pocket in good mannerIndex picker Applied 1 pump, sol Individual vacuum Maintain balancedvacuum ejector applied for pressure level and each picker prevent vacuum errorTray cover block No tray cover block Tray cover block Prevent device and machine damage
• In-shuttle: dual shuttle
(4 devices handling)
• In-shuttle sensor detect device
tilt (mis-aligned device placement)
Semiconductor/RF device