Selection Guide for Agilent Vials and Agilent offers a large selection of vials in different styles,...

Click here to load reader

  • date post

    27-Jan-2021
  • Category

    Documents

  • view

    1
  • download

    0

Embed Size (px)

Transcript of Selection Guide for Agilent Vials and Agilent offers a large selection of vials in different styles,...

  • Selection Guide for

    Agilent Vials and Accessories

    A Perfect Fit for Agilent Instruments

  • 2

    The quality and reliability of Agilent instruments are

    also integral to Agilent supplies. Our experienced

    engineers ensure that the specifications and tolerances

    of our vials match our autosamplers.

    We carefully consider critical areas such as vial neck angles,

    bottom design and height when we design enhancements to any

    Agilent autosampler. And we use only top-quality glass approved

    by U.S., European and Japanese Pharmacopiea. The close rela-

    tionship between Agilent instruments and Agilent supplies

    provides a PerfectFit solution that keeps your productivity high.

    Agilent offers a large selection of vials in different styles, a variety

    of cap colors, multiple septa choices, and various packaging

    options and sizes.

    This guide provides information to help you determine the best

    vial and accessories for your specific needs.

    Get a PerfectFit with Agilent Technologies Vials

    Vial Options Glass for general purpose use and for use with acids

    Silanized for use with samples that bind to glass, and for trace analyses

    Microvolume Inserts for use with very small sample volumes

    High Recovery Vials for use with limited sample volumes

    Amber Vials for use with light- sensitive samples

    Polypropylene for use with alcohols and aqueous solvents

  • 3

    High Quality

    Selecting Septa Materials Vial cap septa are critically important to optimal analysis. Each septum complements the overall system and enhances chemical performance. Agilent vial cap septa are specifically formulated and constructed for opti- mum system performance, with minimal coring and superior chemical inertness.

    Red Rubber/PTFE

    • Routine analysis • Moderate resealing • Excellent chemical inertness • Not recommended for multiple

    injections or storage of samples • Least expensive

    Silicone/PTFE

    • Excellent resealing • Resists coring • Good for multiple injections

    PTFE/Silicone/PTFE

    • Used in trace analysis applications • Above average resealing • Most resistant to coring • Least evaporation • Use with large diameter, blunt tip

    syringe needles Packaging Options Vials and caps can be ordered sepa- rately or in combination packs.

    • Vial packs of 100 or 1000 in a plastic tray

    • Caps with septa, 100/pack • Vials, caps and septa in a 6-drawer

    storage box, 500/pack • Pre-assembled vials, caps and septa,

    100/pack • Crimp top vials with microvolume

    inserts, 100/pack

    Receive quantity discounts for high volume purchases, with discount breaks at 1-10, 11-50, 51+.

    PTFE Disc

    • Good for MS and ECD analysis • No contamination • No resealing • Single injection • No long-term sample storage

    Viton®

    • Chlorinated solvents • Organic acids • Limited resealing • Not suitable for 32 gauge syringe

    Determining Your Needs To determine potential quantities, consider: • The number of samples run during

    a day/week • If samples are run in small or large

    batches • If samples are run manually or with

    an autosampler • If samples are run overnight,

    unattended

    Note: Unattended autosampler runs require a precise fit for uninterrupted operation. Typically, automated sam- ple runs use a higher quantity of vials.

  • 4 Partial product listing only. To order or view our entire product line, please visit www.agilent.com/chem

    Crimp Top Vials • Most popular • Least expensive • Needs crimping tool (manual or electronic) • Color-coded caps • Available in glass, polypropylene, high recovery and silanized • Cannot reuse caps

    Wide Opening Crimp Top Vials

    Part No. Description (100/Pack) 5181-3375 Clear wide opening crimp top, 2 ml 5182-0543 Clear wide opening crimp top, 2 ml with write-on spot 5181-3376 Amber wide opening crimp top, 2 ml with write-on spot

    Part No. Description (1000/Pack) 5183-4491 Clear wide opening crimp top, 2 ml 5183-4492 Clear wide opening crimp top, 2 ml with write-on spot 5183-4493 Amber wide opening crimp top, 2 ml with write-on spot

    Part No. Description (Vial Kits 500/Pack) 5181-3400 Clear crimp top vials, silver aluminum crimp cap, Teflon/red rubber septa 5181-8801 Amber crimp top vials, with write-on spot, silver aluminum crimp cap,

    Teflon/red rubber septa

    Crimp Caps with 11 mm Septa

    Part No. Description (100/Pack) 5181-1210 Silver aluminum cap, clear PTFE/red rubber septa 5182-0552 Silver aluminum cap, PTFE/silicone septa 5181-1211 Silver aluminum cap, PTFE/silicone/PTFE septa 5181-1212 Silver aluminum cap, black Viton septa

    Screw Top Vials • Easiest to use • More expensive • Can remove cap to recover or discard sample • Color-coded caps • Available in glass, high recovery and silanized • Can reuse caps

    Wide Opening Screw Top Vials

    Part No. Description (100/Pack) 5182-0714 Clear wide opening screw top, 2 ml 5182-0715 Clear wide opening screw top, 2 ml with write-on spot 5182-0716 Amber wide opening screw top, 2 ml with write-on spot

    Part No. Description (1000/Pack) 5183-2067 Clear wide opening screw top, 2 ml 5183-2068 Clear wide opening screw top, 2 ml with write-on spot 5183-2069 Amber wide opening screw top, 2 ml with write-on spot

    Part No. Description (Vial Kits 500/Pack) 5182-0732 Clear vials, blue screw caps, Teflon/red rubber septa 5182-0867 Clear vials with write-on spot, blue screw caps, Teflon/red rubber septa 5182-0733 Amber vials with write-on spot, green screw caps, Teflon/red rubber septa

    Polypropylene Screw Caps with 11 mm Septa

    Part No. Description (100/Pack) 5182-0717 Blue screw caps, PTFE/red rubber septa 5182-0720 Blue screw caps, PTFE/silicone septa 5182-0723 Blue screw caps, PTFE/silicone/PTFE septa 5183-2076 Blue screw caps, PTFE/silicone pre-slit septa

    Crimp top vial Amber crimp top vial

    Screw top vial Amber screw top vial

  • 5

    Excellent Reliability

    Partial product listing only. To order or view our entire product line, please visit www.agilent.com/chem

    Snap Top Vials • Use snap or crimp cap • Moderate price • Can remove cap, but with more difficulty than with a screw cap • Color-coded caps • Available in glass, polypropylene, high recovery and silanized • Can reuse caps

    Part No. Description (100/Pack) 5181-0544 Clear vial, 2 ml, 12 x 32 mm 5182-0546 Clear vial, 2 ml, 12 x 32 mm with write-on spot 5181-0545 Amber vial, 2 ml, 12 x 32 mm with write-on spot

    Part No. Description (1000/Pack) 5182-2067 Clear vial, 2 ml, 12 x 32 mm 5182-2068 Clear vial, 2 ml, 12 x 32 mm with write-on spot 5181-2069 Amber vial, 2 ml, 12 x 32 mm with write-on spot

    Part No. Description (Vial Kits 500/Pack) 5182-0547 Clear vials, 2 ml, 12 x 32 mm clear polypropylene snap caps, PTFE/red

    rubber septa 5182-0548 Amber vials, 2 ml, 12 x 32 mm with write-on spot, clear polypropylene snap

    caps, PTFE/red rubber septa

    Snap Caps with 11 mm Septa

    Part No. Description (100/Pack) 5182-0542 Clear polypropylene caps, polyethylene septa 5182-0550 Clear polypropylene, PTFE/red rubber septa 5182-0540 Clear polypropylene, PTFE septa 5182-0541 Blue polypropylene caps, PTFE/silicone septa 5182-0566 Clear polypropylene, PTFE/silicone/PTFE septa

    Polypropylene Vials • Translucent and chemically resistant material • For pH-sensitive samples, sodium or heavy metals

    analysis • Temperatures to 135 °C • Crimp and snap caps available

    Part No. Description (100/Pack) 9301-0977 Glass-lined polypropylene wide opening crimp top, 100 µl

    Part No. Description (500/Pack) 5183-2087 Flat-bottom inserts, polypropylene

    Part No. Description (1000/Pack) 5183-4731 Crimp or snap caps, polypropylene, wide opening, 300 µl

    Clear, snap top vial

    Clear, snap top vial with

    write-on spot

    Amber, snap top vial with

    write-on spot

    Glass lined polypropylene

    Flat bottom polypropylene

    Wide opening polypropylene

  • 6

    Screw, crimp or snap top

    Full 1.5 ml capacity

    150 µl volume level

    15 µl volume level

    Microvolume Inserts You can put microvolume inserts into a regular vial for sampling small to very small volumes. The inserts provide less surface area, making it easier to with- draw a sample. Microvolume inserts are available in two materials: glass and polypropylene, with three styles to choose from:

    Polymer Feet • Feet act as a shock absorber preventing the syringe

    needle from striking the bottom of the vial • Allows virtually zero dead volume • Best suited for µl volumes

    Pulled-Point • Economical choice • Fits directly into vial without the use of springs

    Flat Bottom • Sample size of 250 µl • Economical choice

    Part No. Description (100/Pack) 5181-1270 Glass inserts with polymer feet. Conical with precision-formed mandrel

    interior, 100 µl 5181-8872 Deactivated glass inserts with polymer feet. Conical with precision-formed

    mandrel interior and attached feet. Silanized to close off all active sites, 100 µl 5182-0649 Polypropylene inserts with polymer feet. Conical with precision-formed interior

    and attached feet, 100 µl

    Part No. Description (100/Pack) 5183-2085 Pulled-point glass inserts with polymer feet. Conical with pulled-point interior,

    100