Security Modules with Hinged Doors - Eagle Groupsecurity module with hinged doors —shown attached...
4
security module with hinged doors —shown attached to shelf unit PART #A219540 EG10086 Revised 01/08 Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group • 100 Industrial Boulevard, Clayton, Delaware 19938-9905 U.S.A. • www.eaglegrp.com • Phone: 302/653-3000 • (Foodservice/SpecFAB) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065 CA UTION INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE. SAVE YOUR BOX AND ALL PACKING MATERIALS. YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED. Parts List ASSEMBLY INSTRUCTIONS Security Modules with Hinged Doors (1) left door (1) right door (2) end panels (1) rear panel (continued on page 2)
Transcript of Security Modules with Hinged Doors - Eagle Groupsecurity module with hinged doors —shown attached...
security module with hinged doors—shown attached to shelf unit
PART #A219540
EG10086 Revised 01/08
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-9905 U.S.A. • www.eaglegrp.com • Phone: 302/653-3000 • (Foodservice/SpecFAB) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065
CAUTIONINSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING
CARRIER FOR ANY DAMAGE. SAVE YOUR BOX AND ALL PACKING MATERIALS.YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Parts List
ASSEMBLY INSTRUCTIONS
Security Modules with Hinged Doors
(1) left door (1) right door (2) end panels
(1) rear panel
(continued on page 2)
2
ASSEMBLY INSTRUCTIONS
Security Modules with Hinged Doors
Step 1 - Determine location of security moduleby positioning lower wire shelf (not included)accordingly onto posts.
Step 2 - Install rear panel by sliding loops overand down the rear posts, with the bottom of thepanel locking into lower wire shelf.
Step 3 - Install left and right doors by slidingloops over and down the front posts.
(continued on page 3)
splitsleeve
cornercollar
post
postlower wire shelf
splitsleeves
lower wire shelf
rear panel
rearpost
frontpost
frontpost
left door
right door (in place)
rear panel
(rear view)
3
Step 5 - Install top wire shelf (notincluded) onto top of posts. Rearpanel and end panels should lockinto top wire shelf. NOTE: To install top wire shelf, doors mustbe in the open position.
Assembly is complete.
Step 4 - Install end panels by sliding loops overand down the front and rear posts on each end,with the bottom of each panel locking into lowerwire shelf.
ASSEMBLY INSTRUCTIONS
Security Modules with Hinged Doors
(End)
lower wire shelf
frontpost
left end panel
rear post right end panel (in place)
top wire helf
splitsleeve
top wire shelf
post
splitsleeves
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-9905 U.S.A. • www.eaglegrp.com • Phone: 302/653-3000 • (Foodservice/SpecFAB) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065
ASSEMBLY INSTRUCTIONS
Security Modules with Hinged Doors
