III. STEEL HINGED DOORS - mercordoors.com€¦ · Fire protection systems 35 III. STEEL HINGED...

35Fire protection systems

III. STEEL HINGED DOORSmcr ALPE fire resistant EI260/EI130


mcr ALPE single leaf HINGED DOORS FIRE RESISTANT EI260/EI130CORNER DOOR FRAME (STANDARD)

1.1. General characteristics.

The production of fire resistant hinged doors mcr ALPE is based on a CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as a perfect door leaf surface finish. The core of the door leaf is composed of high-density mineral wool glued into two shaped steel sheets of 0.8 mm, with RAL 7035 finish standard. The door leaf thickness is 63 mm, weight 29 kg/m². In standard doors’ range there are two hinges, one of which is spring-wound for automatic door closing. However, for fire resistant doors a door closer is always recommended. If the door height exceeds 2150 mm, a third hinge is required. Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto door surface just at the end of production process.

The STANDARD door model is equipped with:• Mortise latch and dead bolt lock (DIN)• Handle set made of grey or black PVC • Standard European cylinder • Anti-burglary pin on hinges’ side• Door closer reinforcement on hinges’ side• Intumescent gasket• Rubber gasket• Temporary installation bar in the bottom part

On customer’s request, the door may be equipped with various accessories and ancillary equipment: • Door handle made of stainless steel or aluminium

• 3D hinges made of stainless steel• Door closer • Anti-panic lock • Electric strike• Electric lock• Ventilation grill

• Pre-coated metal sheets: RAL 5010, 9002, 9006, 9010, 9016

• Door leaf sheet thickness range from 0.6 to 1.25 mm

• Powder coating - all RAL colours• Kit for external door: anti-rain cap + automatic threshold seal or threshold

• Square, rectangular or round glazing (vision panel)

• Kick plate made of stainless steel • Position signalling contact (magnetic contact)

1.2. Door frame.

As standard, the door is equipped with corner frame. The frame is made of profiled and zinc plated steel 1.5 mm thick and coated with the same RAL colour as the door leaf. Rubber gasket is included. Non-standard frame sizes are made of 1.8 mm steel.

For minimum and maximum door dimensions - see p. 135-138 (certificates).

Temperature coefficient Ud = 1.3 W/m2 K(PN-EN 14351-1+A1:2010)

Maximum acoustic insulation Rw = 32 dB (automatic threshold seal is mandatory)


STEEL DOORS mcr ALPE, SINGLE LEAF EI260/EI130CORNER FRAME (STANDARD), WELDED HINGES (STANDARD)

* see datasheet CUT-OUTS IN CONCRETE WALL


mcr ALPE double leaf HINGED DOORS FIRE RESISTANT EI260/EI130CORNER DOOR FRAME (STANDARD)


The production of fire resistant hinged doors mcr ALPE is based on a CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as a perfect door leaf surface finish. The core of the door leaf is composed of high-density mineral wool glued into two shaped steel sheets of 0.8 mm, with RAL 7035 finish standard. The door leaf thickness is 63 mm, weight 29 kg/m². Passive door leaf is equipped with additional vertical profile overlapping the active leaf. In standard doors’ range there are two hinges, one of which is spring-wound for automatic door closing. However, for fire resistant doors a door closer is always recommended. If the door height exceeds 2150 mm, a third hinge is required. Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto door surface just at the end of production process.

The STANDARD door model is equipped with:• Mortise latch and dead bolt lock (DIN) • Handle set made of grey or black PVC • Standard European cylinder • Flush bolt on passive leaf• Anti-burglary pin on hinges side• Door closer reinforcement on hinge side• Intumescent gasket• Rubber gasket• Temporary installation bar in the bottom part

On customer’s request, the door may be equipped with various accessories and ancillary equipment:• Door handle made of stainless steel or aluminium







1.2. Door frame.

As standard, the door is equipped with corner frame. The frame is made of profiled and zinc plated steel 1.5 mm thick and coated with the same RAL colour as the door leaf. Rubber gasket is included.Non-standard frames are made of 1.8 mm steel.



Maximum acoustic insulation Rw = 32 dB (automatic drop down seal is mandatory)



STEEL DOORS mcr ALPE, DOUBLE LEAF EI260/EI130CORNER FRAME (STANDARD), WELDED HINGES (STANDARD)


mcr ALPE single leaf HINGED DOORS FIRE RESISTANT EI260/EI130INTERNAL DOOR FRAME


The production of fire resistant hinged doors mcr ALPE is based on a CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as a perfect door leaf surface finish. The core of the door leaf is composed of high-density mineral wool glued into two shaped steel sheets of 0.8 mm, with RAL 7035 finish standard. The door leaf thickness is 63 mm, weight 29 kg/m². In standard doors’ range there are two hinges one of which is spring-wound for automatic door closing. However, for fire resistant doors a door closer is always recommended. If the door height exceeds 2150 mm, a third hinge is required. Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto door surface just at the end of production process.









1.2. Door frame.

The door may be equipped with an INTERNAL type frame. The frame is made of profiled and zinc plated steel 1.5 mm thick and coated with the same RAL colour as the door leaf. Rubber gasket is included.Non-standard frame sizes are made of 1.8 mm steel.





STEEL DOORS mcr ALPE, SINGLE LEAF EI260/EI130INTERNAL FRAME, WELDED HINGES (STANDARD)


mcr ALPE double leaf HINGED DOORS FIRE RESISTANT EI260/EI130INTERNAL DOOR FRAME


The production of fire resistant hinged doors mcr ALPE is based on a CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as a perfect door leaf surface finish. The core of the door leaf is composed of high-density mineral wool glued into two shaped steel sheets of 0.8 mm, with RAL 7035 finish standard. The door leaf thickness is 63 mm, weight 29 kg/m². Passive door leaf is equipped with additional vertical profile overlapping the active leaf. In standard doors’ range, there are two hinges one of which is spring-wound for automatic door closing. However, for fire resistant doors a door closer is always recommended. If the door height exceeds 2150 mm, a third hinge is required. Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto door surface just at the end of production process.

The STANDARD door model is equipped with:• Mortise latch and dead bolt lock • Handle set made of grey or black PVC (DIN)• Standard European cylinder • Anti-burglary pin on hinges’ side• Door closer reinforcement on hinges’ side• Intumescent gasket• Rubber gasket• Temporary installation bar in the bottom part








1.2. Door frame.

The door may be equipped with an INTERNAL type of frame. The frame is made of profiled and zinc plated steel 1.5 mm thick and coated with the same RAL colour as the door leaf. Rubber gasket is included.Non-standard frame sizes are made of 1.8 mm steel


Temperature coefficient Ud = 1.3 W/m2 K

(PN-EN 14351-1+A1:2010)

Maximum acoustic insulation Rw = 32 dB

(automatic drop down seal is mandatory)


STEEL DOORS mcr ALPE, DOUBLE LEAF EI260/EI130INTERNAL FRAME, WELDED HINGES (STANDARD)


mcr ALPE single leaf HINGED DOORS FIRE RESISTANT EI260/EI130EMBRACING DOOR FRAME


The production of fire resistant hinged doors mcr ALPE is based on a CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as a perfect door leaf surface finish. The core of the door leaf is composed of high-density mineral wool glued into two shaped steel sheets of 0.8 mm, with RAL 7035 finish standard. The door leaf thickness is 63 mm, weight 29 kg/m². In standard doors’ range there are two hinges, one of which is spring-wound for automatic door closing. However, for fire resistant doors a door closer is always recommended. If the door height exceeds 2150 mm, a third hinge is required. Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto door surface just at the end of production process.

The STANDARD door model is equipped with:• Mortise latch and dead bolt lock (DIN) • Handle set made of grey or black PVC • Standard European cylinder • Anti-burglary pin on hinges’ side• Door closer reinforcement on hinges’ side• Intumescent gasket• Rubber gasket• Temporary installation bar in the bottom part

On customer’s request, the door may be equipped with various accessories and ancillary equipment: • Door handle made of stainless steel or aluminium

• 3D hinges made of stainless steel• Door closer • Anti-panic lock • Electric strike• Electric lock• Ventilation grill• Pre-coated metal sheets: RAL 5010, 9002, 9006, 9010, 9016




• Kick plate made of stainless steel• Position signalling contact (magnetic contact)

1.2. Door frame.

The door may be equipped with EMBRACING type of frame (wrap-around frame) which overlaps the wall. The frame is made of profiled and zinc plated steel 1.8 mm thick and coated with the same RAL colour as the door leaf. Rubber gasket is included.





STEEL DOORS mcr ALPE, SINGLE LEAF EI260/EI130EMBRACING FRAME, WELDED HINGES (STANDARD)



mcr ALPE double leaf HINGED DOORS FIRE RESISTANT EI260/EI130EMBRACING DOOR FRAME


The production of fire resistant hinged doors mcr ALPE is based on a CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as a perfect door leaf surface finish. The core of the door leaf is composed of high-density mineral wool glued into two shaped steel sheets 0.8 mm, with RAL 7035 finish standard. The door leaf thickness is 63 mm, weight 29 kg/m². Passive door leaf is equipped with additional vertical profile overlapping the active leaf. In standard doors’ range there are two hinges, one of which is spring-wound for automatic door closing. However, for fire resistant doors a door closer is always recommended. If the door height exceeds 2150 mm, a third hinge is required. Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto door just at the end of production process.



• 3D hinges made of stainless steel• Door closer • Anti-panic lock • Electric strike• Electric lock• Ventilation grill• Pre-coated metal sheets: RAL 5010, 9002, 9006, 9010, 9016


• Powder coated - all RAL colours• Kit for external door: anti-rain cap + automatic threshold seal or threshold


• Kick plate made of stainless steel• Position signalling contact (magnetic contact)

1.2. Door frame.

The door may be equipped with EMBRACING type of frame (wrap-around frame) which overlaps the wall. The frame is made of profiled and zinc plated steel 1.8 mm thick and coated with the same RAL colour as the door leaf. Rubber gasket is included.





STEEL DOORS mcr ALPE, DOUBLE LEAF EI260/EI130EMBRACING FRAME, WELDED HINGES (STANDARD)


III. STEEL HINGED DOORS - mercordoors.com€¦ · Fire protection systems 35 III. STEEL HINGED...

Documents

Transcript of III. STEEL HINGED DOORS - mercordoors.com€¦ · Fire protection systems 35 III. STEEL HINGED...