Last Updated: 07/02/10

Kreg

Section Q-2: K

regSection Q-2: Kreg

Maverick Hardware

2

Kreg JigK3 Master System KRK3MSFeatures

Includes one drill guide block, bench top base, portable base, •premium face clamp, ,material support stop, dust collection, shroud, drill bit, depth collar, allen wrench, driver bits, sample screws and carrying caseDust-collection shroud snaps into place on the bench top base when •neededandattachestoanystandard11/4″vacuumhose.Thedrillblockguideslidesandlocksin1/8″incrementsinboththe•benchtopandportablebases,centeringascrewinmaterialfrom1/2″to11/2″thickinjustseconds.Simplyloosenthepin,slidethedrillguide block to the desired setting, and drill awayAdjustittotheedgeoftheboardtopreciselyrepeatpockethole•positionsforquickproductiondrilling.Whenyoudon’tneeditoryou’redrillingpanels,thehingedstopsimplyswingsoutofthewayThe handle for the clamp is on the same side as your drill, so you no •longerneedtoreacharoundtheworkpiecetosetyourclamp.

Face ClampsKRKHC-LARGE Goodforapplicationshwereaslightlylongerreachishelpful.6”reach,willhandleworkpiecesupto5”thick.

KRKHC-XLARGEGoodforapplicationswherethelongestpossiblereachisrequired.10”reach,willhandleworkpiecesupto6”thick.

KRKHC-PREMIUMBestforamajorityofPocket-Screwapplications.3”reach,willhandleworkpiecesupto23/4”thick.

Kreg Tools

Sect

ion

Q-2

: Kre

g

2610 Roosevelt Blvd, Eugene OR, 97402(541) 688-1878(800) 452-2612 Fax 688-1993

3

Mini Kreg Jig Kit®Goes Where Other Pocket Holes Jigs Won’tKRMKJKITFeatures

Thisisagreatstartersystemforpocketholejoinery.ThiskitincludestheMini•KregJig,stepdrillbit,depthcollarandanallenwrenchforanchoringthecollar.TheMiniKregJigwillgojustaboutanywhereyoucanreachwithadrill.•Whetheryouneedpocketholesonaboardatyourworkbenchorneedtocrawlunderatabletomakearepair.The rugged design is built to last, including the hardened steel drill guide that •comeswithalifetimeguarantee.TheMiniKregJigfeaturesaglass-reinforcednylonbodyalongwithahardened•steeldrillguidethathasalifetimewarranty.Canbeclampedatvirtuallyanyangleororientationtotheworkpiece.•Unlimitedmaterialthickness.TheMiniKregJigdoesn’thaveareferencefence,•you can position is exactly where you want it to center a screw in a variety of differentmaterialthicknesses.Chipextractionhole.Youdonothavetokeepremovingthedrilltocleanoutthe•hole.Thechipextractionholeinthejiggivestheremovedmaterialaplacetogo,soyoucankeepondrilling.TheMiniKregJighasaplug-settingfeatureonthebottomofthejigthathelpsyoupresstheplugintopositiontoprotect•yourhands.PrecisepocketholesareaguaranteewiththeMiniKregJigbecausethehardenedsteeldrillguidekeepsthebitfrom•deflectingasithitstheworkpiece.

Mini Kreg Jig® OnlyKRMKJFeatures

TheMiniKregJigwillgojustaboutanywhereyoucanreachwithadrill.•Whetheryouneedpocketholesonaboardatyourworkbenchorneedtocrawlunderatabletomakearepair.The rugged design is built to last, including the hardened steel drill guide •thatcomeswithalifetimeguarantee.TheMiniKregJigfeaturesaglass-reinforcednylonbodyalongwitha•hardenedsteeldrillguidethathasalifetimewarranty.Canbeclampedatvirtuallyanyangleororientationtotheworkpiece.•Unlimitedmaterialthickness.TheMiniKregJigdoesn’thavea•reference fence, you can position is exactly where you want it to center a screwinavarietyofdifferentmaterialthicknesses.Chipextractionhole.Youdonothavetokeepremovingthedrilltocleanoutthehole.Thechipextractionholeinthejig•givestheremovedmaterialaplacetogo,soyoucankeepondrilling.TheMiniKregJighasaplug-settingfeatureonthebottomofthejigthathelpsyoupresstheplugintopositiontoprotect•yourhands.PrecisepocketholesareaguaranteewiththeMiniKregJigbecausethehardenedsteeldrillguidekeepsthebitfrom•deflectingasithitstheworkpiece.

Kreg Tools

Section Q-2: K

reg

Maverick Hardware

4

The Kreg Pocket Hole MachinePneumatic Foreman DB55 KRDB55Features

Industrial,¾hppneumaticmotorpowersthismachine.Requiresacompressorcapable•ofproducing8cfmat120psi.One-step operation drills perfect pocket holes in seconds with hands free clamping for •addedspeedandsafety.

MotorType: Pneumatic,3/4hpDrill Bits: DKDBdrillbit(3/8″shankdia3/16pilot1/2″long)CFMRating: 6cfmat50%dutycycle(120psi)Cycle Time: 1 second cycle timeMaterialClampingCapacity: 1-1/2″Hole Centering Capability: 1/2″materialto11/2″materialWeight: 40 lbsDimensions: 20″Hx14″Wx23″D(Tabletopheightof6″)On-Center Spindle Spacing: N/A

The Kreg Pocket Hole MachineElectric Foreman DB110 KRDB110Features

Rugged,single-phaseelectricmotor.Simplyplugthismachineintoanystandard110V•outlet.One-step operation drills perfect pocket holes in seconds with hands-free clamping for •addedspeedandsafety.

MotorType: Electric,¾hp110VSinglePhaseDrill Bits: DKDBdrillbit(3/8″shankdia3/16pilot1/2″long)CFMRating: N/ACycle Time: 1 second cycle timeMaterialClampingCapacity: 1-1/2″Hole Centering Capability: 1/2″materialto11/2″materialWeight: 40 lbsDimensions: 20″Hx14″Wx23″D(Tabletopheightof6″)On-Center Spindle Spacing: N/A

Kreg Tools

Sect

ion

Q-2

: Kre

g

2610 Roosevelt Blvd, Eugene OR, 97402(541) 688-1878(800) 452-2612 Fax 688-1993

5

The Kreg Pocket Hole Machine (Pneumatic Floor Model)Single-Spindle DK1100FP KRDK1100FPFeaturesMotorType: Pneumatic,11/4hpDrill Bits: DKDBdrillbit(3/8″shankdia3/16pilot1/2″long)CFMRating: 8cfmat50%dutycycle(120psi)Cycle Time: 1 second cycle timeMaterialClampingCapacity: 4″Hole Centering Capability: 1/2″materialto11/2″materialWeight: 138lbs.Dimensions: 50″Hx24″Wx24″D(tabletopheightof40″)On-Center Spindle Spacing: N/A

The Kreg Pocket Hole Machine (Pneumatic Table Model)Single-Spindle DK1100TP KRDK1100TPFeatures

Pneumatic,1¼”hpmotor•Abilitytobemountedflushwiththetopofyourworkbench•

MotorType: Pneumatic,11/4hpDrill Bits: DKDBdrillbit(3/8″shankdia3/16pilot1/2″long)CFMRating: 8cfmat50%dutycycle(120psi)Cycle Time: 1 second cycle timeMaterialClampingCapacity: 4″Hole Centering Capability: 1/2″materialto11/2″materialWeight: 77lbs.Dimensions: 19″Hx24″Wx24″D(tabletopheightof8″)On-Center Spindle Spacing: N/A

The Kreg Pocket Hole Machine (Electric Floor Model)Single-Spindle KRDK1100FEFeatures

Electric11/2”hpmotor•Runsonstandard110Vsinglephasepower•

•MotorType: Electric,11/2hp110VSinglePhaseDrill Bits: DKDBdrillbit(3/8″shankdia3/16pilot1/2″long)CFMRating: 1cfmforclampcylinder(90psi)Cycle Time: 1 second cycle timeMaterialClampingCapacity: 4″Hole Centering Capability: 1/2″materialto11/2″materialWeight: 176lbs.Dimensions: 50″Hx24″Wx24″D(tabletopheightof40″)On-Center Spindle Spacing: N/A

Kreg Tools

Section Q-2: K

reg

Maverick Hardware

6

The Kreg Pocket Hole MachineMulti-Spindle DK3100 KRDK3100Features

Themulti-spindleDK3100containsthreespindlesthatallowsyoutodrilltwopocket•holesacrossrailsofvaryingwidthsinonemachinecycle.This machine can be quickly changed to drill a single pocket hole like our DK1100 •seriesbysimplyremovingadrillbit.Themulti-spindlecomeswitha11/2hp110Vsinglephaseelectricmotor,drill•spindlesspacedat3/4″,1″,and11/2″on-centerandafencethatadjustsfromthetopsideofthemachinetocenterascrewinmaterialfrom1/2″upto11/2″thick.Easysetup,onesecondcycletimesandverydurable.•

MotorType: Electric,11/2hp110VSinglePhaseDrill Bits: 2DKDBdrillbits,1LH-DKDBlefthand(3/16pilot1/2″long)CFMRating: 1cfmforclampcylinder(90psi)Cycle Time: 1 second cycle timeMaterialClampingCapacity: 4″Hole Centering Capability: 1/2″materialto11/2″materialWeight: 179lbs.Dimensions: 50″Hx24″Wx24″D(tabletopheightof40″)On-Center Spindle Spacing: 3/4″,1″,3/4″

The Kreg Pocket Hole MachinePanel Boring DK5100 KRDK5100Features

Isdesignedfordrillingpocketholesincabinetsides,shelving,stairs,windowanddoorextensionsandmore.•Thismachinehasfivedrillspindlesthatarespaced6″on-center.•Each spindle can be individually turned on or off, so you can drill one, two, three, •fourorfiveholesatonce.Five durable, industrial-grade pneumatic motors provide all the power, and the •36″widetableprovidesplentyofsupportforlargepanels.Thismachineisbuiltfortheshopthathasaspecificrepetitiveapplicationthat•needsincreasedproductivity.

MotorType: 5Pneumatic3/4hpDrill Bits: DKDBdrillbit(3/8″shankdia.3/16pilot1/2″long)CFMRating: 20cfmat50%dutycycle(120psi)Cycle Time: 2 second cycle timeMaterialClampingCapacity: 13/4″Hole Centering Capability: 1/2″materialto3/4″materialWeight: 350lbs.Dimensions: 50″Hx36″Wx24″D(tabletopheightof40″)On-Center Spindle Spacing: 6″

Kreg8′PolyurethaneCoilHoseKRCT6023Features

1/4″NPTfittings•

Kreg Tools

Sect

ion

Q-2

: Kre

g

2610 Roosevelt Blvd, Eugene OR, 97402(541) 688-1878(800) 452-2612 Fax 688-1993

7

Kreg Pneumatic Screw GunKRCT6030Features

Quick-change chuck•Reversible•Poweredbyusingpneumaticoutletontable•

Kreg Pocket Hole MachineFraming Table KRKFT4X8Features

Large,4x8′tablesurfacewith4pneumaticclampingcylinders.•Assemblyisquick,andsincetheflushassemblereducesandofteneliminates•theneedforsanding,yousaveevenmoretimeandmoney.Theframingtablestandsata30degreeangle,soituseslessfloorspacethan•aflattableandsavesyourbackbyallowingyoutoworkuprightratherthanhunchedover.Withtheframingtable,you’llgetitall,itbeginswiththesquaringfencefora•perfectlysquarestart.Thepneumaticclampingcylindersholdyourframeflushagainstthesturdy•surface,helpingtoeliminateimperfectionsintheassemblesoyou’llrarely,ifever,needtofinishsandyourframe.Retractablesquaringfence,powerfulclamping,customizedsetup,andstable•worksurface.

Kreg Tools

Section Q-2: K

reg

Kreg Large Bench KlampKRKKS-KLRBKFeatures

Heavy-dutyversionthatfeaturesa10″x10″x1/4″thicksteelplatethatiszincplated.•ThebenchKlampisdesignedtogiveyouthesamebenefitsasanextrasetofhandsto•takeonandoffinseconds.Gives you the versatility of our face clamps with the convenience of workbench •mounting.You’llbeamazedathowflushyourpocketholejointswillturnout.Thisclampisusefulfromroutingandsandingtofinishing.•

Maverick Hardware

8

Kreg Pocket Hole PlugsPlastic CapsFeatures

P• lasticCapsaregreatforlaminatedsurfacesandcomeinseveralcolors.

Part # ColorKRC-BRN BrownKRC-BLK BlackKRC-WHT WhiteKRC-ALM AlmondKRC-LTB Light Brown

Kreg Pocket Hole PlugsSolid Wood PlugsForthosetimeswhenpocketholeswon’tbehiddenonthebacksideofyourprojectoryouwanttohighlightthemdecoratively,useourpocketholeplugs.Solidwoodplugsareofferedindifferentwoodspecies,asareplasticcapsforuseinlaminatedsurfaces.

Part # FinishKRP-MAP MapleKRP-OAK OakKRP-CHE Cherry

Kreg Drill Bits and DriversKreg Drill BitsFeatures

Our one piece design eliminates clogging and provides a much smoother and faster drilling •strokethanthedrillbitswithreplaceablecenterdrills.TheKJDbitforourmanualpocketholejigsismadeofhigh-speedsteelwhiletheDKDBbitis•madeofcobaltsteelthatincreasesthebit’slife.TheDKDBbitis3/8″diameteritcanbeusedinanyofourothermanualjigsasapremium•replacement.

Part # DescriptionKRDKDB-LH ForDK3100CenterSpindle(LeftHand)KRKJD ForMini,Rocket,K2,K2000&K3KRDKDB CobaltMachineDrillBitforallKregmachines

Kreg Tools

Sect

ion

Q-2

: Kre

g

2610 Roosevelt Blvd, Eugene OR, 97402(541) 688-1878(800) 452-2612 Fax 688-1993

9

Kreg Right Angle ClampKRKHC-RACFeatures

Kreg’sRightAngleClamphelpstoalignworkpiecesina90degreeregistration.•Theclampisdesginedwitha3/8”steelpinononearmthatfitsdownintothe•pocketholeandanchorstheworkpiecefirmlyagainsttheseconworkpiecetobejoined.Theoppositearmisfittedwitha180swivelingpadthatautomaticallyadjuststo•yourmaterialdimensions.

Kreg Precision Miter Gauge SystemKRKMS7102Whyspendtimecalibratingamitergaugewhenyoucangetfactory-milledaccuracyrightoutofthe box?Features

PrecisionMiterGauge,24″fence,andFlipstop•Kreg’sPrecisionMiterGaugeSystemrequiresnocalibrating,andpositivestops•at0,10,22-1/2,30and45°makeiteasytocutperfectmitersquickly.Whenyouwant to make a more complicated angle, the easy-to-use vernier scale allows for fastadjustmentsto1/10thofadegree.Lockssecurelyintoplacewiththesimpleturnofaknob-noclampsneeded.•The Flipstop is patented curved foot that lifts out of the way when you slide a •boardintoit,sosquaringanendandcuttingtolengthdoesn’trequiremovingthestop.Containsaneasy-to-readclearlensthatletsyousettheflipstoppreciselywhereyouwantit.•Youcanevenaddasacrificialboardtothefaceofthefencefortear-outfreecutsandstillusetheFlipstopthankstothe•breakawayfeature.

Kreg FlipstopKRKMS7801Features

Addadditionalstopstoeithersideofyourtrack.•The patented Flipstop easily sets the distance between the end of the board and the saw blade •foramazingcuttingaccuracyandrepeatability.The curved design of the Flipstop allows a board to bypass the stop system by simply sliding •theboardintothestop,therebyliftingitoutoftheway.TheFlipstopfeaturesanadjustablelenscursermuchlikethatfoundonahigh-qualitytable•sawripfencethatcanbe“zeroed”outtoassurepinpointaccuracy.

Kreg Tools

Section Q-2: K

reg

Maverick Hardware

10

Kreg Production StopKRKMS7800Features

Theproductionstopisbuiltforaruggedshopenvironment.•Dual lens cursors on both sides of the stop allow it to be easily used on either side of the blade •withoutreconfiguring.This stop also drops onto both the Top Trak and Heavy Duty Trak from the topside, allowing it to •bequicklyremovedandrepositionedwithoutslidingtotheedgeofthetracksection.

KregImperial12′SelfAdhesiveTapeFeatures

This1/2″wide,self-adhesivemeasuringtapefitssnuglyintotheindentationonthetopsideof•ourTopTrakandHeavyDutyTrak.Metallictapeishighlyscuffresistantandcanbetrimmedtolengthwithscissors.•

Part # DescriptionKRKMS7724 Tape(12′L-Rreading)KRKMS7723 Tape(12′R-Lreading)

Kreg Top TrakFeatures

Trak features a self aligning L-shaped mounting foot for easy installation to a shop-made •fence.Justdrill1/8″holesthroughthebackoftheextrusionandsecurewiththeincludedmounting•screws.

Part # DescriptionKRKMS7712 TopTrak(2′length)KRKMS7714 TopTrak(4′length)

Kreg Drawer Slide Mounting ToolKRNZ03Features

Putanendtotryingtomountdrawerslideswithonehandattemptingtoholdtheslideinplace•whiletheotherhandfiddleswiththedrillandscrews.Attaching drawer slides-bottom-mount or full-extension perfectly parallel to the drawer •openingisasnapwiththemagneticdrawerslidemountingtool.The strong, rare earth magnets hold most types of the metallic drawer slides in place, •freeingyourhandsfortherestofthejob.Thetoolincludesaneasy-griphandleandprovidesaflatsurfaceforeasyclamping.•Designed to work with both face frame and faceless cabinets, the mounting tool has large openinginthesidetogiveyouclearacrossfordrivingscrews.

Kreg Tools

Sect

ion

Q-2

: Kre

g

2610 Roosevelt Blvd, Eugene OR, 97402(541) 688-1878(800) 452-2612 Fax 688-1993

11

Kreg Drawer Mounting BracketsKRNZ03-BFeatures

For both face frame and faceless cabinets, aligning the drawer box to the slides is simple •withtheDrawerMountingBrackets.Simply clamp a bracket under each slide, set the drawer box into the drawer opening so it •balancesonthebrackets,thenpulltheslidetothefrontoftheboxanddriveyourscrews.The12″bracketsworkwithmostcommondrawersizes,andthe1/8″tabsonthefrontof•bracketaredesignedtofitundermountedfull-extensionslidesforperfectplacementeverytime.Madeofrugged,shock-resistantplasticforyearsofservice,thesebracketsareagreat•additiontoyourworkshopandtoolbox.

Kreg Klamp TableKRKKS1000Features

Buy separately and use on existing work bench•Includes 2 bench klamps•5 klamp blocks•2 lengths of klamp trak, all positioned on a durable melamine surface•

Kreg Bench KlampKRKKS-BKFeatures

GlidesalongtheKlampTrakorlocksintotheKlampplateprovidingstrong360°clamping•Includes, clamp, inter-lock bolt, and clamp pad•

Kreg Klamp Trak™KRKKS1020Features

Providesseamlessclampingplanedowntheedgeofyourworkbench•PerfectforquickpositioningofyourbenchKlamp™andKlampBlocks™•Turn the entire length of your work bench into a clamping station•333/4”inlength•

Kreg Tools

Section Q-2: K

reg

Maverick Hardware

12

Kreg Klamp Blocks™KRKKS1030Features

UsewithKlampTrak™•These blocks will allow you to quickly and accurately register your stock to the edge of your work •spaceMadefromdurableimpactresistantplastic•

Kreg Klamp Table with Steel StandKRKKS2000Features

Includes 2 bench klamps•5 klamp blocks•2 lengths of klamp trak, all positioned on a durable melamine surface•4 leveling feet•Assembly hardware•

Kreg Universal Steel StandKRKRS1030Features

PerfectfoundationforallKregTableTopSolutions•Madefromheavygaugesteel•Adjustablefrom31”to36”inheight.•4 leveling feet •Assembly hardware•

Kreg Tools

Sect

ion

Q-2

: Kre

g