Section PR - The Reynolds Company · PDF fileVERSAMATE® SERIES • PLUGS AND...

PRi

PLUGS AND RECEPTACLES INDEX

PR

Section PR

Introduction/Features

Applications.........................................2 - 5

VP/VR/VPR Series

30 amp including new “AT” models .............6

VP/VR/VPR Series

60 amp including new “AT” models .............7

VP/VR/VPR Series

100 amp including new “AT” models ...........8

VP/VR/VPR Series

200 amp ...................................................9

VSQ (VWSQ Series NEMA 4)

Interlocked Switched Receptacles ..........10

VSQ-FS Series

Factory Sealed Receptacles ...................11

VBQ Series

Interlocked Breaker Protected

Receptacles.....................................12 - 13

VSI Series

Plugs and Switched Receptacles.....14 - 16

VCR Series

Clean Room Receptacles........................17

KR Series

Introduction.............................................18

KR Series

20, 30 and 60 amp ..........................19 - 21

UGP/UGR Series

Plugs and Receptacles ....................22 - 23

Adapter, Grips and Handlamps...............26

UGRC Series

Connector ...............................................24

UGRP Series

Panel Mount Receptacle .........................25

UGRGF Series

GFI Protector Receptacle........................26

UGFI Series

Ground Fault Protector ............................27

HAZARDOUS LOCATIONS –BLADE STYLE

NEMA 4X

HAZARDOUS LOCATIONS –INTERLOCKED

HAZARDOUS LOCATIONS –DELAYED ACTION

HAZARDOUS LOCATIONS –INTERLOCKEDI.E.C. CONFIGURED

PRi PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPRRRRRRRRRRRRRRRRRRRRR

VERSAMATE® SERIES • PLUGS AND RECEPTACLESNEMA 4X METALLIC

PR2

FEATURES-SPECIFICATIONS

THE FIRST NEMA 4X RATED LINE OFMETALLIC PLUGS & RECEPTACLES.

VersaMate® metallic pin & sleeve plugs & receptacles aredesigned for heavy duty industrial use. These devices sup-ply power to both fixed and portable electrical equipmentincluding pumps, generators, welders, vacuums, blowersand similar apparatus.

Suitable for indoor or outdoor use. Applications include thewet, cold, hosedown, hazardous or corrosive areas in suchindustrial applications as:

• Pulp & Paper Mills • Breweries• Electrical Power Plants • Refineries• Petrochemical Plants • Chemical Plants• Wastewater Treatment • Grain Facilities • Marine, Docks, Ports • Textile Manufacturing• Construction Sites • Food Processing Facilities

Standard Materials:Copper-free aluminum construction with electrostaticallyapplied epoxy/polyester finish. Contacts are brass with apatented beryllium copper spring tensioner. External screwsare 316 stainless steel.

Features:The VersaMate product line includes 30, 60, 100 and 200Amp plugs, receptacles and connectors with a full range ofback boxes. Popular options include reverse service andpolarization. The VersaMate line is FULLYINTERCHANGEABLE1 with UL1686 configured and listeddevices such as Crouse-Hinds® Arktite® or Appleton®

Powertite®. Standard location receptacle bolt hole patternsmatch competitive back boxes so users can upgrade toVersaMate without changing back boxes in instances wherechanging the conduit system is difficult.

600 VAC/250VDC; 50-400 HertzNEMA 3, 4, 4XClass I, Div. 1 & 2, Groups B,C,D; NEMA 7 B,C,D2Class l, Zones 1 & 2, llB+H2, llA2Class ll, Div. 1 & 2, Groups F & G;NEMA 9 F,G2Class lll2

1VersaMate® components are UL classified and intermateable with other UL

1686-C1 configured devices (when installed in accordance with instructions

furnished with device). Assemblies containing components from other manu-

facturers would have the NEMA type rating of the lowest rated device.

2See product pages for specific ratings.

Arktite® is a registered trademark of Crouse-Hinds®.

Powertite® is a registered trademark of Appleton®.

Plugs:Octagonal style (Patented) for a firm and sure

grip when connecting or disconnecting is fea-

tured on both plug and cable connector

bodies. Insulators have high mechanical and

dielectric strength and “Low Arc Tracking.”

“Increased Safety” type box terminals with

gripper ribs securely clamp around conductors.

Funneled conductor entry chambers lead all properly stripped

conductors into terminals simultaneously. NEMA 4X rating

when inserted into VersaMate receptacle and locking ring is

tightened.

Receptacles:Exclusive Patented “Breech-Lock” cap

serves as either flip lid or screw cover.

Receptacle is NEMA 3R with lid snapped

shut or NEMA 4X with lid turned shut or

when VersaMate plug is inserted and locking

ring tightened. Patented notch in cap arm

holds cap open for easy plug insertion or

maintenance. Patented pin design uses slotted spring clip which

avoids excessive wear while providing continuous electrical pin

to sleeve contact. VersaMate® receptacles use the same

“Increased Safety” terminals and funnel design as

VersaMate® plugs.

Cable Clamping Assembly:Plugs and cable connectors are

supplied with an exclusive neoprene

“Onion Skin” peel-away type grom-

met. The VersaRange® cable clamp

system captures cable with four

grip points using only two tighten-

ing screws. Clamp guide assembly provides a firm fit over a

wide range of cable diameters. Non-removable set screws pre-

vent clamp guide assembly from backing out. Clamps have

smooth contoured shoulder design to prevent snags or damage

when moving equipment.

Back Boxes:VersaMate back boxes come in a variety of

mounting styles. Exclusive “blind” recepta-

cle mounting holes prevent moisture from

entering box via thread cavities. Boxes

come with a green grounding screw.

VSQ VBQVR/VP

NEW

ALLEN/SLOTTERMINALS

PR2PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR222222222222222222222

VERSAMATE® SERIES • PLUGS AND RECEPTACLESFEATURES AND COMPARISONS

PR3

KILLARK BRAND

PR

New Allen/slot terminal screws donot contact or machine conductor.Allows higher torque values typicalin the oil industry.

VersaMate original Phillips/slot“Increased Safety” type terminalsreduce connection fatigue.Screws do not contact or machineconductor and are under springtension to reduce loosening andpullout due to vibration.

Conventional screw type terminals. Screws “machine”(grind or fray) conductor.Screws are not under tensionand more easily loosen fromheating and cooling cyclesor from vibration. Screws canfall out (and be lost) duringinitial shipment-requiresreassembly.

“Breech-Lock” design serves as both flip lid or screw coverstyle. Special notch in lid armholds cover open to ease pluginsertion or maintenance.

Conventional caps: usermust choose between fliplid's convenience or screwcover's better sealing capa-bilities. Broken chains canmean lost covers.

Exclusive "Onion Skin" style gas-ket assures a tight seal aroundcable. Skin layers are removedfrom a single gasket to adjust forvarious cable diameters.

Multiple gaskets requiretrial & error sizing to be sure of best fit andseal.

Versatile range Cable Clamp system captures cable at fourgrip points using only twoscrews. Smooth contoureddesign avoids snags when moving equipment.

Standard clamps squeezeand pinch cable. Protrudingscrews snag or scratchwhen moving equipment.Other clamp systems withmultiple screws are difficultto tighten evenly.

*

*Slip pencil or screwdriver into notch.

TERMINALS

CAP

GASKET

CABLE CLAMP

OTHER BRANDS

ALLEN/SLOTTERMINALS

• First NEMA 4X - Still the BEST!

• Exclusive interior gasketing

• Exclusive Terminal Designs

• No conductor machining

• Allen or Phillips types

• Exclusive Onion-Skin Gasket

• Perfect Cable Fit

• Exclusive 4-Point Cable Grip

• Uses only 2 Recessed Screws

• Exclusive Breech-Lock Cap

• Flip or Screw-On

• Notch to hold openNEW!

PR3 PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR3

VERSAMATE® SERIES • PLUGS AND RECEPTACLESFEATURES

PR4

EXCLUSIVE FEATURES:

Patented Exclusive “Breech-Lock” capserves as either flip lid or screw cover

• NEMA 3R Rating:When receptacle capis snapped shut

• NEMA 4X Rating:When receptacle cap isturned shut or withVersaMate

®

plug insertedand ring tightened

PatentedSpecial notch is designed to hold cap open for easy fieldservice or plug insertion withtwo free hands

Key user needs were identified from “Focus Groups” comprised of Design Engineers, Contractors,and Maintenance Personnel. Input from these forums resulted in VersaMate’s unique features.

Keyway prevents incorrect plug insertion

O-ring seals

Custom pin designusing slotted springclip to provide superior contact and reliability

Sleeveincorporates contaminaterelief port

Exclusive neoprene “Onion Skin” peel-away type gasket for the ultimate in sealing a variety of cable sizes

VersaRange®

Cable clamp systemcaptures cable with four grip pointsusing only two tightening screws.Provides secure grip without damaging the cable insulation

•

•

••

•

•

• Smooth shoulder contour prevents snags & hang ups

NEW 30,60,100A “AT” Allen/Slotor “Increased safety” Phillips/Slotterminals provide secure clamp-ing of conductors

Funneled wiring chamber design for fast and accurate conductor insertion to speed assembly. All wires can be inserted at one time

PatentedBody style with octagonalshape for easy grip

P

•

•P•P

Unique VersaMate® FeatureThe VersaMate® Line is designedfor the industrial customer basedon engineering and user surveys

O-ring seals

• Funneled wiring chamberdesign for fast and accurate conductor insertion to speed assembly. All wires can be inserted simultaneously

Denotes Patented Feature•P


VERSAMATE® SERIES • PLUGS AND RECEPTACLESNEMA 4X METALLIC

PR5

PR

REVERSE SERVICE: S39Add suffix S39 for factory Reverse Serviceof receptacles, plugs or connectors.Receptacles or connec-tors are assembled withplug interiors whileplugs are assembledwith receptacle interiors.For applications wherethe plug is energized(i.e. from a generator) tofeed a non-energizedreceptacle. Preventseasy contact with energized exposed pins. This conversioncan be performed in the field with a complementary plug &receptacle (30A to 100A devices shown on pages PR6-8).200A Amp devices shown on page PR9 are a factory-onlyoption. Reverse Service is not for hazardous locations.

Style I

In a Style I plug, the cable’s ground conductor is bonded to the plug housing by means of solderless connector. Thereceptacle is grounded by being part of a grounded conduitsystem. Upon insertion, detent springs in the receptaclehousing contact and ground the plug housing before currentcarrying poles. All poles are current carrying.

GROUNDING: To minimize the danger of electrical shock when utilizingportable equipment, the National Electrical Code requiresexposed metal parts be grounded if operated at more than150 volts to ground. The VersaMate® plug & receptacle sys-tem is available in two grounding styles. Please note Style Iand II devices cannot be intermated.

POLARIZED OPTION: S37Add suffix S37 for special polarity.

Can prevent connection between mismatched voltages or frequencies in areas where devices of the same amperage,poles and grounding style are used. Receptacle or connectorinteriors are rotated 22-1/2° to the right; plug is rotated oppo-site to match. This is a factory only option.

Style II

In a Style II plug, the cable’s ground conductor is bonded to the extra grounding pole and to the plug housing via abonding jumper. The receptacle has a matching groundingpole connected to the system ground conductor which isfurther tied to the grounded conduit system via a bondingjumper. Upon insertion, detent springs in the receptaclehousing contact and ground the plug housing; then theextra long ground pole connects before the current carrying poles engage. The Style II ground pole makes firstand breaks last.

Standard S37 Option

Typical Application

3W4P Illustrated3W3P Illustrated


3 0 A M P R E C E P TA C L E S & B A C K B O X E S

CATALOG NUMBER

VERSAMATE® SERIES • PLUGS AND RECEPTACLES30 AMP NEMA 4X METALLIC

PR6


*See page PR5 for more information on these options.

Plug

Connector

Receptacle Back Box Dimensions

• 30 Amp 600VAC/250VDC; 50-400 HertzNEMA 3, 4, 4X1

• PLUGS ONLY2 :Class I, Div. 1 & 2, Groups B,C,D; NEMA 7 B,C,DClass l, Zones 1 & 2, llB+H2, llAClass ll, Div. 1 & 2, Groups F & G; NEMA 9 F,G; Class lll

GROUND

STYLE

Sty le I

S ty le I I

2W2P

3W3P

4W4P

2W3P

3W4P

VR321E2VR331E2VR341E2VR332E2VR342E2VRE23

VR321C2VR331C2VR341C2VR332C2VR342C2

VRC23

VR321D2VR331D2VR341D2VR332D2VR342D2VRD23

VR321

VR331

VR341

VR332

VR342

–

CIRCUIT E3 TYPE

ORIG. AT

C3 TYPE

ORIG. AT

D3TYPE

ORIG. AT

RECEPTACLE ONLY

ORIG. AT

Splice box only3

330 Amp Back Boxes are available in 1/2", 3/4" and 1" conduit sizes.

Size listed for 3/4". For other available sizes, change the BOLD “2 ” in either the

assembly or box only number to: 1=1/2", 2=3/4", 3=1". Assembly catalog numbers

are listed for ease of ordering or specification and devices are shipped as compo-

nents.

3 0 A M P P L U G S & C O N N E C T O R S

Sty le I

S ty le I I

2W2P

3W3P

4W4P

2W3P

3W4P

.55 - 1 .20 IN

.55 - 1 .20 IN

.55 - 1 .20 IN

.55 - 1 .20 IN

.55 - 1 .20 IN

VP3275

VP3375

VP3475

VP3385

VP3485

GROUND

STYLECIRCUIT

GROMMET

RANGEPLUG

ORIG. AT

VPR3255

VPR3355

VPR3455

VPR3365

VPR3465

CONNECTOR

ORIG. AT

VRD

VRC

VRE

1Components are intermateable & UL classified with other UL1686 config

ured devices (when installed in accordance with instructions furnished

with device). Assemblies containing components from other manufactur

ers would have the NEMA type rating of the lowest rated device.

2Plugs are hazardous suitable when mated with properly rated receptacles

configured to use UL1686 type plugs, such as VersaMate VSQ/VBQ.

– Note, 2, 3 & 4 pole device dimensions are the same.

M O D I F I C AT I O N S *

Reverse ser v ice for receptac les , p lugs & connectors

Polar i za t ion for receptac les , p lugs & connectors

S39

S37

CATALOG NUMBER DESCRIPTION

CATALOG NUMBER

C D ReceptacleEConnector

Wire Range

Fi le No. E10757 Cer t i f i ed F i le No. LR111846

Regular S t randing: #10 - #6 or ig ina l s ty le or “AT” type

Ext ra f lex : #10 - #8 or ig ina l s ty le or “AT” type

Plug

VersaRange® clamps provide

a firm fit for one plug (or con-

nector) over a wide range of

cable diameters (competitors

often need two – requiring

additional sizing decisions).

VP3022

VP3033

VP3044

VP3023

VP3034

VPR3022

VPR3033

VPR3044

VPR3023

VPR3034

VR3022E2VR3033E2VR3044E2VR3023E2VR3034E2

VRE23


VRC23

VR3022

VR3033

VR3044

VR3023

VR3034

–

VR3022D2VR3033D2VR3044D2VR3023D2VR3034D2

VRD23

Origional or AT

Terminals. See PR3 for

more information



PR7


PRReceptacle

Plug

Connector

Back Box Dimensions

• 60 Amp 600VAC/250VDC; 50-400 Hertz NEMA 3, 4, 4X1


1Components are intermateable & UL classified with other UL1686 config-

ured devices (when installed in accordance with instructions furnished

with device). Assemblies containing components from other manufacturers

would have the NEMA type rating of the lowest rated device.

2Plugs are hazardous suitable when mated with properly rated receptacles

configured to use UL1686 type plugs, such as VersaMate VSQ/VBQ.

4Dimensions in ( ) are 3 pole devices; balance are 4 pole.

360 Amp Back Boxes are available in 1", 1-1/4" and 1-1/2" conduit sizes. Size listed

above is 1-1/4". For other available sizes, change the BOLD “4” in either the assembly

or box only number as follows: 3=1", 4=1-1/4", 5=1-1/2". Assembly catalog numbers

are listed for ease of ordering or specification and devices are shipped as components.

Note: 60 Amp receptacles also fit 100 Amp mounting boxes –

see Note4on 100 Amp page PR8.

VRC

VRE

VRD





S39

S37


Connector

VersaRange® clamps provide

a firm fit for one plug (or con-

nector) over a wide range of

cable diameters (competitors

often need two – requiring

additional sizing decisions).

Plug

4

C D ReceptacleE

Wire Range




6 0 A M P R E C E P TA C L E S & B A C K B O X E S

GROUND

STYLE

Sty le I

S ty le I I

2W2P

3W3P

4W4P

2W3P

3W4P

VR621E4VR631E4VR641E4VR632E4VR642E4VRE46


VRC46

VR621D4VR631D4VR641D4VR632D4VR642D4VRD46

VR621

VR631

VR641

VR632

VR642

–

CIRCUIT E3 TYPE

ORIG. AT

C3 TYPE

ORIG. AT

D3TYPE

ORIG. AT

RECEPTACLE ONLY

ORIG. AT

Splice box only3

CATALOG NUMBER


VRE46


VRC46

VR6022

VR6033

VR6044

VR6023

VR6034

–

VR6022D4VR6033D4VR6044D4VR6023D4VR6034D4

VRD46

CATALOG NUMBER

6 0 A M P P L U G S & C O N N E C T O R S

Sty le I

S ty le I I

2W2P

3W3P

4W4P

2W3P

3W4P

.65 - 1.50 IN

.65 - 1.50 IN

.65 - 1.50 IN

.65 - 1.50 IN

.65 - 1.50 IN

VP6275

VP6375

VP6475

VP6385

VP6485

GROUND

STYLECIRCUIT

GROMMET

RANGEPLUG

ORIG. AT

VPR6255

VPR6355

VPR6455

VPR6365

VPR6465

CONNECTOR

ORIG. AT

VP6022

VP6033

VP6044

VP6023

VP6034

VPR6022

VPR6033

VPR6044

VPR6023

VPR6034

6 1/2

8 13/16

Origional or AT


more information



PR8


Back Box Dimensions

1Components are intermateable & UL classified with other UL1686 config-

ured devices (when installed in accordance with instructions furnished with

device). Assemblies containing components from other manufacturers would

have the NEMA type rating of the lowest rated device.

2Plugs hazardous suitable when mated with properly rated receptacles

configured to use UL1686 type plugs, such as VersaMate VBQ.

5Dimensions in ( ) are 3 pole devices; balance are 4 pole.

* Angle adapter only

3100 Amp Back Boxes are available in 1", 1-1/4", 1-1/2" & 2" conduit sizes.

Size listed above is 1-1/2". For other available sizes, change

the BOLD “5” in either the assembly or box only number as follows:

3=1", 4=1-1/4", 5=1-1/2", 6=2". Assembly catalog numbers are listed for ease of

ordering or specification and devices are shipped as components.

4100 Amp Boxes & Adapters also fit 60 Amp receptacles. Adapter only can

be used to attach receptacle at an angle to a standard sheet metal box.

VJC

E C





S39

S37


Connector

Receptacle

Plug

Connector

5

Feed through style shown

Plug

VersaRange® clamps

provide a firm fit for one

plug (or connector)

over a wide range of

cable diameters (com-

petitors often need two

– requiring additional

sizing decisions).

Receptacle

Wire Range




• 100 Amp 600VAC/250VDC; 50-400 Hertz NEMA 3, 4, 4X1


CATALOG NUMBER

1 0 0 A M P P L U G S & C O N N E C T O R S

Sty le I

S ty le I I

2W2P

3W3P

4W4P

2W3P

3W4P

.88 - 1 .68 IN

.88 - 1 .68 IN

.88 - 1 .68 IN

.88 - 1 .68 IN

.88 - 1 .68 IN

VP10277

VP10377

VP10477

VP10387

VP10487

GROUND

STYLECIRCUIT

GROMMET

RANGEPLUG

ORIG. AT

VPR10257

VPR10357

VPR10457

VPR10367

VPR10467

CONNECTOR

ORIG. AT

VP1022

VP1033

VP1044

VP1023

VP1034

VPR1022

VPR1033

VPR1044

VPR1023

VPR1034

1 0 0 A M P R E C E P TA C L E S & B A C K B O X E S

GROUND

STYLE

Sty le I

S ty le I I

2W2P

3W3P

4W4P

2W3P

3W4P


VJ57


VJC57

VR1021

VR1031

VR1041

VR1032

VR1042

VJA100*

CIRCUIT E3 TYPE

ORIG. AT

C3TYPE

ORIG. AT

RECEPTACLE ONLY

ORIG. AT

Splice box only3

CATALOG NUMBER


VJ57

VR1022

VR1033

VR1044

VR1023

VR1034

VJA100*


VJC57

Origional or AT


more information



PR9


PRReceptacle

Connector

Back Box Dimensions

2 0 0 A M P P L U G S & C O N N E C T O R S

Sty le I

S ty le I I

3W3P

4W4P

2W3P

3W4P

1.0 - 2 .5 IN

1.0 - 2 .5 IN

1.0 - 2 .5 IN

1.0 - 2 .5 IN

VP203512

VP204513

VP203612

VP204612

GROUND

STYLECIRCUIT

GROMMET

RANGE PLUG

CATALOG NUMBER

VPR203112

VPR204113

VPR203212

VPR204212

CONNECTOR

1 Components are intermateable & UL classified with Appleton®

Powertite® or Crouse-Hinds® Arktite® devices (when installed in

accordance with instructions furnished with device. Assemblies con

taining components from other manufacturers would have the NEMA

type rating of the lowest rated device.

4 Dimensions in ( ) are 3 pole devices; balance are 4 pole.

5 200A 3W4P Reverse Service configured “W” Series and VersaMate®

are not intermateable. However, the VersaMate VR20422-S39 recepta-

cle ships with instructions to permanently convert for use with existing

PW-6402X SU39 plugs. Factory only configured plugs to fit old RW64C-

SU39 receptacles may be ordered as VP-PW64026 SU39.

200 Amp Back Boxes are available in dead-end sizes 1-1/2",

2" & 2-1/2" conduit sizes. Dead-end box shown is 2". For other available

dead-end box sizes, change the BOLD “6” in either the dead-end assembly

or box only number as follows: 5=1-1/2", 6=2", 7=2-1/2". Feed through boxes

are available in 2-1/2"; use “R” series adapters as required for smaller sizes

(sold separately). Assembly catalog numbers are listed for ease of ordering

or specification and devices are shipped as components.

Adapter only can be used to attach receptacle at an angle to a standard

sheet metal box.

NOTE: 200A VersaMate receptacle lids secure with wingnuts for N4X environ-

ments when not in use. VersaMate plugs secure with wingnuts and/or

lock-ring collar. This exclusive dual method allows retention of competi-

tive plugs that use either wingnuts or a lock-ring collar.

ReceptacleCE

VJC





S395

S37


2 0 0 A M P R E C E P TA C L E S & B A C K B O X E S

GROUND

STYLE

Sty le I

S ty le I I

3W3P

4W4P

2W3P

3W4P

VR20312E6VR20412E6VR20322E6VR20422E6

VJ68

VR20312C7VR20412C7VR20322C7VR20422C7

VJC78

VR20312

VR20412

VR20322

VR20422

Angle adapter

only VJA200

CIRCUIT E2TYPE

C2TYPE

RECEPTACLE

ONLY

Spl ice box only

w/adapter23

CATALOG NUMBER

200 Amp 600VAC/250VDC; 50-400hertz NEMA 3 4, 4X1

VersaRange®

clamps provide a

firm fit for one plug

(or connector) over

a wide range of

cable diameters

(competitors often

need two – requir-

ing additional sizing

decisions).

Plug

Wire Range


E213215

Regular S t randing: #1 - 250

Ext ra f lex : #1 - 250

( .653 max conductor d iameter )

Plug Connector

2

3

4

ALLENTERMINALS


VERSAMATE® SERIES • PLUGS AND RECEPTACLESVSQ & VWSQ INTERLOCKED SWITCHED RECEPTACLES

PR10


V S Q & V W S Q R E C E P TA C L E S

• VSQ Hazardous Location RatingsClass I, Div. 1 & 2, Groups B,C,DClass I, Zones I & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F & G Class lllNEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

VersaMate VSQ & VWSQ Receptacles use

VersaMate Style II plugs found on pages PR6 & PR7

and are compatible with appropriately configured

Crouse-Hinds® Arktite® or Appleton® Powertite®

plugs (when installed in accordance with instruc-

tions furnished with device)



Features• N4X with receptacle lid turned shut

or with plug locking ring tightened

• Copper-free aluminum constructionwith electrostatically applied poly-ester/epoxy finish. Handle mecha-nism is chemical resistant Valox®

(TM General Electric).

• Compact size and footprint

• Plug Interlock Mechanism for Dead-front construction. Switch cannot beturned “ON” without fully insertedplug. Plug cannot be removed withswitch in “ON” position

• Plug held in place when switch is“Off” for convenience. Pull operatedrelease mechanism. Plug and wiringdo not have to be twisted or held tooperate switch

• Factory Wired Receptacle; easy towire line side of switch

• Easily visible “On-Off” indicator handle

• “Off” position is padlockable formaintenance safety

• Auxiliary Contact (late-make early-break)

contact rated 10 Amp, 1/3 HP at 125/250

VAC. Can be used for operating pilot

lights or starter coils (standard model only)

• Feed-through construction

• Horsepower Rated

• Internal switch horsepower rated as “motor disconnect”

HORSEPOWER120 240 480 600

RATINGS (VAC)1

1Ø 2 5 10 15

3Ø 3 7.5 15 20

1Ø – 10 15 20

3Ø – 10 25 30

30A

60A

NOTES: VSQ/VWSQ 30 Amp models come standard with 1" drilled and tapped conduit openings

top and bottom plus two 1" x 3/4" reducers and one 3/4" close-up plug for maximum flexibility.

60 amp models come with 1-1/2" openings top and bottom and one 1-1/2" close-up plug.

VSQ & VWSQ Receptacle covers are NOT interchangeable.

1Refers to internal switch only.

VSQ HAZARDOUS VWSQ N4X ONLY VERSAMATE PLUG

302W3P VSQ3023 VWSQ3023 VP3385

3W4P VSQ3034 VWSQ3034 VP3485

602W3P VSQ6023 VWSQ6023 VP6385

3W4P VSQ6034 VWSQ6034 VP6485

CATALOG NUMBER

AMPS CIRCUIT

*See page PR5 for more information on this option


Polar i za t ion for

receptac les , p lugs S37


V S Q & V W S Q R E C E P TA C L E S

Fi le No. LR14667

Fi le No. E91049

• VWSQ for Wet & Corrosive LocationsNEMA 3, 4, 4X

Wire Range

30 Amp Regular S t randing Max #10


Dimensions shown are in inches for 30 AMP: 60 Amp dimensions in ( ).

NOTES: Devices have adjustable ductile lugs (vertical or side) for attachment to uneven surfaces.

Ordinary twist type wire connectors are used for final connections on 30A,

60A devices have terminal blocks.

Dimensions

VSQ

VWSQ

PR10PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR11111111111111111111111111111111111111111111111111111111111111111111111111111100000000000000000000

VERSAMATE® SERIES • PLUGS AND RECEPTACLESVSQ-FS FACTORY SEALED INTERLOCKED SWITCHED RECEPTACLE

PR11


PR

Class I, Div. 1 & 2, Groups B,C,DClass I, Zones I & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F & G Class lllNEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

Dimensions shown are in inches for 30 AMP. 60 AMP Dimensions in ( ).

Features – same as VSQ1 plus:• Factory Sealed Construction elimi-

nates need for conduit sealing at the device

• Saves Installation Time & Labor –facilitates rework

• Switch has factory wired line andload terminals. Load terminals feedsealed receptacle as in a standardVSQ. Line wiring is passed from thesealed compartment into the wiringchamber

• Receptacles may be loosened fromblack box and turned 180 degrees toadjust for top or bottom feed.

• Ordinary twist type wire connectorsare used for final connections on30A. 60A devices have terminalblocks

NOTES: VSQ-FS 30 Amp models come standard

with one 1" drilled and tapped conduit openings

into the wiring chamber plus one 1" x 3/4"

reducer.

60 amp models come with one 1" opening.

1VSQ-FS models do not have auxiliary contacts.

VSQ-FS VERSAMATE

HAZARDOUS PLUG

30 2W3P VSQ3023FS VP3385

30 3W4P VSQ3034FS VP3485

60 2W3P VSQ6023FS VP6385

60 3W4P VSQ6034FS VP6485

V S Q - F S R E C E P TA C L E S

Dimensions

*See page PR5 for more information on this option.


Polarizat ion for receptacles

& plugs S37


CATALOG NUMBER

AMPS CIRCUIT

Fi le No. E91049

Cer t i f i ed F i le No. LR14667

Wire Range



PR11 PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR11111111111111111111111111111111111111111111111111111111111

VERSAMATE® SERIES • PLUGS AND RECEPTACLESVBQ BREAKER PROTECTED INTERLOCKED RECEPTACLES600VAC/250VDC

PR12


VersaMate VBQ Receptacles use VersaMate

Style II plugs found on 30, 60 and 100 amp pages

and are compatible with appropriately configured

Crouse-Hinds® Arktite® or Appleton® Powertite®

plugs (when installed in accordance with instruc-

tions furnished with device).



Receptacle:

• N4X with receptacle lid turned shutor with plug locking ring tightened

• Plug held in place when switch is“Off” for convenience. Pull buttonoperated release mechanism. Plugdoes not have to be twisted to oper-ate switch

• Dead-front construction when recep-tacle is off. Switch cannot be turned“ON” without fully inserted plug. Plugcannot be removed with switch in“ON” position

• Wire Connections do not bend whenopening and closing door – minimizesloosening during installation or maintenance procedures

Features

Dimensions

Enclosure:

• Spacious wiring room. Meets the latest NEC wire bending require-ments for circuit breaker enclosures

• Ductile Mounting Lugs to adjust touneven surfaces

• Copper-free construction with 316grade Stainless Steel ExternalHardware

• Quick Release Cover Bolts with TripleLeads – only 3-1/2 turns to disengage

• Recessed Flange Notches – Allowseasier cover opening with pryinginstrument without flange damage

• Aluminum lacquer paint finish for cor-rosion resistance

• Visible “ON” external Breaker Handlehas provisions for locking “ON” or“OFF” with up to three Padlocks

• Internal Lock-Off provision for main-tenance when no hazardous materi-als are present

Fi le No. E184637

Receptacle assembly

is field replaceable for

maintenance.

Ordering information listed

in the instruction sheets

provided with the product.

Class I, Div. 1 & 2, Groups B,C,DClass I, Zones I & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F & G Class lllNEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

Note: The VBQ series is B7EC enclosure

based. See page E-13 for additional

dimensional information.

Replacement Parts:

• Enclosure gasket VBQ-535

• External handle kit CBHK-100H

See instruction sheet included with device for other available replace-ment parts.


M O D I F I C AT I O N S1

Internal Lock-Off

provision for

maintenance when

no hazardous

materials are present

VERSAMATE® SERIES • PLUGS AND RECEPTACLESVBQ BREAKER PROTECTED INTERLOCKED RECEPTACLES600VAC/250VDC

PR13


PR

Circui t Breaker Wire Range

Square D To 30 Amp #14-4 cu. ; 35-100 Amp #14-1/0 cu .

Cut le r-Hammer To 20 Amp #14-10 cu. ; 30-100 Amp #14-1/0 cu .

Consult Breaker Manufacturer literature for Horsepower Ratings.

†DC ra t ings apply to substan t ia l ly non- induct ive c i rcu i ts .

*Pending breaker s ty le change.

RECEPTACLE CIRCUIT BREAKER

CATALOG NUMBER

Polar izat ion for receptacles & plugs

Dra in

Brea ther

Dra in and Brea ther (CSA Groups C & D)

S37

SU10

SU11

SU3


1See page PR5 and price sheet for more information on these options.

V B Q R E C E P TA C L E S

SQUARE D SQUARE D CUTLER-HAMMER CUTLER-HAMMER VERSAMATE

FAL (480 VAC MAX.) FHL (600 VAC MAX.) EHD (480 VAC MAX.) FD (600 VAC MAX.) PLUG

20 VBQ3023SN20 VBQ3023SH20 VBQ3023CN20 VBQ3023CH20 VP3385

30 VBQ3023SN30 VBQ3023SH30 VBQ3023CN30 VBQ3023CH30 VP33852W3P









2W3P 70 VBQ6023SN70 VBQ6023SH70 VBQ6023CN70 VBQ6023CH70 VP6385





3W4P 70 VBQ6034SN70 VBQ6034SH70 VBQ6034CN70 VBQ6034CH70 VP6485











Fi le No. E184637

Class I, Div. 1 & 2, Groups B,C,DClass I, Zones I & 2, IIB+H2, IIAClass II, Div. 1 & 2, Groups F & G Class lllNEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

Circui t Breaker 208/240 480 VAC 600 VAC 250 VDC†

In ter rupt ing Ra t ings VAC

Square D FAL(HDL*) 25,000 18,000 —— 10,000

Square D FHL(HGL*) 65,000 25,000 18,000 10,000

Cut le r-Hammer EHD 18,000 14,000 —— 10,000

Cut le r-Hammer FD 65,000 25,000 18,000 10,000


VERSAMATE® SERIES • PLUGS AND RECEPTACLESVSI NON-METALLIC PLUGS AND SWITCHED RECEPTACLES

PR14


Class I, Div. 2, Groups A,B,C,DClass I, Zones 1 & 2, Groups llC, llB, llA

AEx de IIC T6Class II, Div. 1 & 2, Groups E,F,GClass IIINEMA 3, 4, 4X, IP66

FM

APPROVED

Cer t i f i ed - F i le LR240743

See f i les for de ta i ls or ca l l K i l la rk

F i le 3014299

CATALOG NUMBER

2 Pole

3 Wire

3 Pole

4 Wire

4 Pole

5 Wire

Applications• For use in hazardous and corrosive

environments such as refineries,chemical plants, water treatment andbio gas plants, and wherever a com-bustible gas-air mixture or com-bustible dust may occur

Features• Color coding and pin configuration

makes it physically impossible tomate plugs and receptacles of different voltages and current ratings

• Interlocked switch mechanism prevents accidental removal of plugfrom receptacle under load

• Horsepower rated disconnect switch

• Dust caps* included with 20A and30A plugs as standard

• No seal required within Class I, Division2 applications.

• Provision for up to two optional auxilliarycontact blocks, useful for signaling cir-cuits or starter coils.3

• Dimensional information - page PR16.

V S I S E R I E S P L U G S & S W I T C H E D R E C E P TA C L E S

T E C H N I C A L D ATA

AC VOLTAGE AND

COLOR CODE

125 Yellow

250 Blue

480 Red

3 Ø 250 Blue

3 Ø 480 Red

3 Ø 600 Black

3 ØY 120/208 Blue

3 ØY 277/480 Red

3 ØY 347/600 Black

DESCRIPTION

RECEPTACLE

VSI20R304

VSI20R306

VSI20R307

VSI20R409

VSI20R407

VSI20R405

VSI20R509

VSI20R507

VSI20R505

PLUG

VSI20P304

VSI20P306

VSI20P307

VSI20P409

VSI20P407

VSI20P405

VSI20P509

VSI20P507

VSI20P505

PLUG

—

—

—

VSI30P409

VSI30P407

VSI30P405

VSI30P509

VSI30P507

VSI30P505

RECEPTACLE

—

—

—

VSI30R409

VSI30R407

VSI30R405

VSI30R509

VSI30R507

VSI30R505

30 AMP220 AMP1

PARTS AND ACCESSORIES3

Auxiliary Contact Block NC, A6004

Auxiliary Contact Block NO, A6004

PART NUMBER

VSIAUXNC

VSIAUXNO

410A rating for one auxiliary block; 5A if two are

used. Position noted (NC or NO) is when main

switch is off.

Snap into side(s) of terminal block

RECEPTACLE

ENCLOSURE MATERIAL

AMBIENT TEMPERATURE,Ta

TERMINAL CAPACITY

SWITCH RATING (HORSEPOWER)

120 VAC

240 VAC

480 VAC

600 VAC

LINE SUPPLY FUSE

BOTTOM ENTRY

POLYAMIDE

-30°C (-22°F) TO +55°C (131°F)

2 wires, rated 75°C (Ta<45°C) or 90°C (Ta>45°C)

CLASS J - size per NEC/CEC requirement

20 AMP

16-10 AWG

3/4” NPT

30 AMP

14-8 AWG

3-phase

—

10 HP

20 HP

25 HP

1” NPT

1-phase

1.5 HP

3 HP

5 HP

3-phase

—

5 HP

10 HP

15 HP


PLUG

ENCLOSURE MATERIAL

TERMINAL CAPACITY

CORD OUTER DIA.

POLYAMIDE

1 wire, rated 75°C (Ta<45°C) or 90°C (Ta>45°C)

20 AMP

16-10 AWG

0.3” - 0.8”

30 AMP

14-8 AWG

0.6” - 1.1”

1VSI 20A devices are compatible with prior 16A models. However, the rating of the loweramperage will apply.

2VSI 30A devices are compatible with prior 32A models. Ratings of the lower amperagewill apply.

* Dust caps shall be installed on plugs with receptacle cover closed when the plug is not engaged in the receptacle.


VERSAMATE® SERIES • PLUGS AND RECEPTACLESVSI NON-METALLIC PLUGS AND SWITCHED RECEPTACLES

PR15

PR


Class I, Div. 2, Groups A,B,C,DClass I, Zones 1 & 2, Groups llC, llB, llA

AEx de IIC T6Class II, Div. 1 & 2, Groups E,F,GClass IIINEMA 3, 4, 4X, IP66

FM

APPROVED

Dust cap shall be installed on the plug when

the plug is not engaged in the receptacle.

P L U G D U S T C A P

FOR PLUG TYPE CATALOG NUMBER

VSI63P4__ VSI63801140

VSI63P5__ VSI63801140

VSI125P4__ VSI125801140

VSI125P5__ VSI125801140

CATALOG NUMBER

63 AMP 125 AMP

3 Pole

4 Wire

4 Pole

5 Wire

V S I S E R I E S P L U G S & S W I T C H E D R E C E P TA C L E S

AC VOLTAGE AND

COLOR CODE

3 Ø 250 Blue

3 Ø 480 Red

3 Ø 600 Black

3 ØY 120/208 Blue

3 ØY 277/480 Red

3 ØY 347/600 Black

DESCRIPTION

PLUG

VSI63P409

VSI63P407

VSI63P405

VSI63P509

VSI63P507

VSI63P505

RECEPTACLE

VSI63R409

VSI63R407

VSI63R405

VSI63R509

VSI63R507

VSI63R505

PLUG

VSI125P409

VSI125P407

VSI125P405

VSI125P509

VSI125P507

VSI125P505

RECEPTACLE

VSI125R409

VSI125R407

VSI125R405

VSI125R509

VSI125R507

VSI125R505

Applications• For use in hazardous and corrosive

environments such as refineries,chemical plants, water treatment andbio gas plants, and wherever a com-bustible gas-air mixture or com-bustible dust may occur

• When VSI Series is installed in ClassII Div. 1 & 2 locations, dust caps forplugs are required. See orderinginformation below

Features• Color coding and pin configuration

makes it physically impossible tomate plugs and receptacles of different voltages and current ratings

• No seals required within Class I, Div.2 applications

• Interlocked switch mechanism prevents accidental removal of plugfrom receptacle under load

• Horsepower rated disconnect switchincludes 1 auxiliary contact (latemake, early break) for signaling cir-cuits.

• 63A, 125A models

Dimensional Information• See page PR16

VSI non-metallic devices NOT intermateable with Versamate® NEC metallic series.


RECEPTACLE

ENCLOSURE MATERIAL

AMBIENT TEMPERATURE,Ta

TERMINAL CAPACITY

SWITCH RATING (HORSEPOWER)

120 VAC

240 VAC

480 VAC

600 VAC

LINE SUPPLY FUSE

BOTTOM ENTRY

FIBER REINFORCED POLYESTER

-20°C (-4°F) TO +40°C (104°F)

2 wires, 90°C rated

CLASS J - size per NEC/CEC requirement

63 AMP

6-1/0 AWG

3-phase

10 HP

20 HP

40 HP

60 HP

1-1/2” NPT

125 AMP

1/0-3/0 AWG

3-phase

20 HP

40 HP

100 HP

125 HP

2” NPT


PLUG

ENCLOSURE MATERIAL

TERMINAL CAPACITY

CORD OUTER DIA.

POLYAMIDE

1 wire, 90°C rated

63 AMP

10-4 AWG

0.94” - 1.4”

125 AMP

6-1/0 AWG

1.2” - 2”

Cer t i f i ed - F i le LR240743

See f i les for de ta i ls or ca l l K i l la rk

F i le 3014299


VSI NON-METALLIC PLUGS AND SWITCHED RECEPTACLESPR1613

.5”(

34

2 m

m)

RECEPTACLE & PLUG 63A

3 POLE - 4 WIRE AND 4 POLE - 5 WIRE RECEPTACLE & PLUG 125A

3 POLE - 4 WIRE AND 4 POLE - 5 WIRE

.35

”(9

mm

)

.35”(9 mm)6”

(152 mm)

7.1”(180 mm)

.51

”(1

3 m

m)

16”(407 mm)

8.3”(211 mm)

19.4

”(4

93

mm

)

.43

”(11

mm

)

.43”(11 mm)8.7”

(220 mm)

10.7”(270 mm)

.8”

(20

.5 m

m)

21.8”(553 mm)

12.0”(296 mm)

4.1” (104 mm)

4.9”

(12

5 m

m)

.24

”(6

mm

)

(6 mm)

9.8

” (2

48

mm

)

6.2

5”

(15

9 m

m)

.47” (12 mm)

7.12” (181 mm)

4.0” (103 mm)

3.7” (94 mm)

4.5

2”

(115

mm

).2

4”

(6 m

m)

5.9

” (1

50

mm

)

.47” (12 mm)

6.6” (168 mm)

.24”

(6 mm)

3.66” (93 mm)

4.13” (105 mm)

9.1

3”

(23

2 m

m)

.24”

O.D. 3” (76 mm)

6.9”

(17

6 m

m)

O.D. 2.4”(60 mm)

RECEPTACLE 20A

2 POLE - 3 WIRE

PLUG 20A RECEPTACLE 20A

3 POLE - 4 WIRE AND 4 - POLE 5 WIRE

4.9” (124 mm)

5.9

” (1

50

mm

).2

4”

(6 m

m)

.47” (12 mm)

8.15” (207 mm)

.24”

(6 mm)

4.8” (123 mm)

5.3” (135 mm)

11.1

” (2

81

mm

)

O.D. 3.9” (99 mm) - 4 WireO.D. 4” (102 mm) - 5 Wire

8.03

” (20

4 m

m)

O.D. 2.8”(72 mm)

RECEPTACLE 30A

3 POLE - 4 WIRE AND 4 POLE - 5 WIRE PLUG 30A

Dimensions

NOTE: Drawings are not to scale

10.6”(268.5 mm)

4.4”(112 mm)

2.7”(69.5 mm)

3.3

” (8

4 m

m)

4.9”(125 mm)

3.2”(82 mm)

12.2”(310.5 mm)

3.8

” (9

6 m

m)

4.5” (115 mm)7.

4” (

188

mm

)


VERSAMATE® SERIES • PLUGS AND RECEPTACLESVCR CLEAN ROOM RECEPTACLES

PR17


PR

Suitable for:

Class I, Div. 2, Groups A,B,C,DClass I, Zones 1 & 2, Groups IIC, IIB, IIAClass II, Div. 1 & 2, Groups E,F,GClass IIINEMA 3CENELEC-EEx de IIC T6 IP54

Applications• Designed specifically for hazardous

location clean rooms, such as foundin the pharmaceutical industry,where equipment must be easy toclean and free of contaminant hold-ing cavities. Electrical devicesshould also be flush wall mounted,with concealed wiring, to minimizecontamination.

• VSI20P and VSI30P series plugsinclude debris caps, which are re-quired in Class II Div.1 and 2 locations.

Features • Available with single or duplex

receptacles, in 16 or 32 amps with a variety of voltage and pin configurations 2

• Flush mounting, smooth contours for easy cleaning

• Hazardous locations suitability

• Enclosure made of stainless steelwith concealed EPDM gasketing

• Cover is hinged on left side.Provides access with loosening of 2screws

• Color coding and pin configuration iscompliant to IEC 60309-2.

• Interlocked switch mechanism pre-vents accidental removal of plugfrom receptacle under load.

• Explosion protected disconnectswitch requires protection by Class“J” fuse (upstream), 20A max. for16A receptatcle, 40A max. for 32Areceptacle.

CATALOG NUMBER

2 Pole

3 Wire

3 Pole

4 Wire

4 Pole

5 Wire

V C R S E R I E S C L E A N R O O M R E C E P TA C L E S

AC VOLTAGE AND

COLOR CODE

125 Yellow

250 Blue

480 Red

3 Ø 250 Blue

3 Ø 480 Red

3 Ø 600 Black

3 ØY 120/208 Blue

3 ØY 277/480 Red

3 ØY 347/600 Black

DESCRIPTION

I I 2G EEx ed I IC T5/T6, IP65

PTB No. 01 ATEX 1001

—

—

—

VCR32R409

VCR32R407

VCR32R405

VCR32R509

VCR32R507

VCR32R505

OFF

ON

VSI20P304

VSI20P306

VSI20P307

VSI20P409

VSI20P407

VSI20P405

VSI20P509

VSI20P507

VSI20P505

VCR16R304

VCR16R306

VCR16R307

VCR16R409

VCR16R407

VCR16R405

VCR16R509

VCR16R507

VCR16R505

—

—

—

VSI30P409

VSI30P407

VSI30P405

VSI30P509

VSI30P507

VSI30P505

32 AMP116 AMP1

RECEPTACLE PLUG2 RECEPTACLE PLUG2

1VCR catalog numbers shown in table are for SINGLE receptacles. For duplex units, add second

receptacle configuration to catalog number.

Example: VCR32R409-16R304

Left Receptacle Position

Right

Receptacle Position

Single/DuplexReceptacleProfile

SingleReceptacle

DuplexReceptacle

Duplex Receptacle

220A plugs fit 16A receptacles; 30A plugs fit 32A receptacles.

VCR non-metallic plugs NOT intermateable with VersaMate® NEC metallic series.


KR SERIES • PLUGS AND RECEPTACLESHAZARDOUS LOCATION - DELAYED ACTION

PR18


Lis ted E23572

Cer t i f i ed LR146671

Class I, Div. 1 & 2, Groups C,DClass l, Zones 1 & 2, llB,llANEMA 7 (C,D)

E L E C T R I C A L R AT I N G S

ApplicationsKR Series plugs and receptacles aresuitable:

• In hazardous locations due to the presence of flammable vapors orgases

• Where a heavy duty plug and recep-tacle is necessary

• Where a connection is required for portable or movable equipment suchas tools, motors, hand lights, etc.

• KP series plugs use solder termina-tions for sure connection

• KR series receptacles use wire leadsfor termination

Features• Factory sealed receptacles

• Copper free aluminum

• Straight or angle type receptacles

• Delayed action contacts (See TimeDelay Inset)

• Plugs with a wide range of grommetopenings

• Extra long grounding pole makescontact first and breaks contact last

• Heavy duty construction to withstandrough and constant usage

SelectionRefer to page headings for suitability ofspecific items. When selecting a Killarkdevice consider the following:

(A) Installation area (Hazardous orWeather-Resistant)

(B) Amperage

(C) Voltage

(D) Electrical Rating (see below)

(E) Grounding

(G) Modifications (see right)

(H) Mounting arrangement

(I) Box and hub type

(J) Cord diameter

Details of SafetyTime Delay Feature

The key slot provided in the receptacleengages the key of the plug permittingentrance of the plug in the receptaclein only one position. See steps 1-4.

The contacts are enclosed in longaccurate insulating cavities. It is inthese cavities that the arcs are extin-guished. All contacts are made throughround tellurium copper tubing which isextra heavy to withstand arcing asrequired on the various ampere ratings.

Both plugs and receptacles areequipped with an extra long groundingpole which establishes groundingbefore the power contacts areengaged. These grounding poles arealso the last to break contact. Thisassures bonding of the portable deviceto the electrical conduit system.

Selection

Modifications are available by adding

the following suffix to the catalog num-

ber. (Note: It must be added to both

the plug and the receptacle so they

will mate.)

TYPE AMPERAGE VOLTAGE VAC CIRCUIT H.P. HERTZ

120 AMP 20 115/230 2W3P 1 60

7 460 2W3P 1/2 60

7 460 3W4P 1 6030 AMP

30 115/230 2W3P 1-1/2 60

30 115/230 3W4P 3 60

30 460 2W3P 3 60

30 460 3W4P 5 6060 AMP

60 115/230 2W3P 5 60

60 115/230 3W4P 5 60

Safety Time Delay Feature

M O D I F I C AT I O N S

In te r ior contac t assem-

bl ies a re to be ro ta ted 22-

1/2° to the r igh t .

SU37

In te r ior contac t assem-

bl ies a re to be ro ta ted

22-1/2° to the le f t .

SU38


Plug then can be moved

completely in and be energized

Receptacle Keyway

Key Plug

Plug can move in only to the

first step of the keyway until...

Align Keyway on plug with receptacle.

1

2

3

4

...key is moved up

1CSA approval on 20 Amp only.


KR SERIES • PLUGS AND RECEPTACLES20 AMP/115/230 V.A.C. • 1Ø 2 WIRE, 3 POLE

PR19


PR

K R J R E C E P TA C L E W I T H A J O R J L B O X

K R S 2 0 A 1 Ø 2 W R E C E P TA C L E W I T H S W B B O X2

E L E C T R I C A L R AT I N G

Lis ted F i le No. E23572


CIRCUIT RATING (60 HERTZ)

1Ø 20 AMPS 115/230 V.A.C. 1 H.P.

2W3P

CATALOG NUMBER

KRS Series KRA

CATALOG NUMBER

AJC JLC JLX

— KRJC-120 KRJX-120

KRAJC-220 KRJC-220 KRJX-220

KRAJC-320 — —

HUB

SIZE

1/2"

3/4"

1"

HUB

SIZE

1/2"

3/4"

1"

K P 2 0 A M P P L U G

CATALOG NO. DESCRIPTION

Plug furn ished wi th KP-20ABC

3 grommets range .250 - .625

KRS-Series

B A C K B O X O N LY

1/2" — JLC-1 JLX-1

3/4" AJC-2 JLC-2 JLX-2

1" AJC-3 — —

RECEPTACLE ONLY - CATALOG NUMBER KRJ-20

JL Series boxes shown on page F60. Refer to page headings for suitability of

specific items.

See page PR18 for available polarization options.

Plug

RECEPTACLE ONLY - CATALOG NUMBER KRS-20

1KRS Series receptacles - Class I, Group D.

2SWB Series mounting splice boxes only for receptacles shown above listed on page C19.


AJC JLXJLC

KRJ-Series

See page PR18 for available polarization

options.

SINGLERECEPTACLE &DEAD END BOX

BOX

ONLY

SINGLERECEPTACLE &FEED-THRU BOX

BOX

ONLY

KRS-215-120

KRS-215-220

KRS-215-320

SWB-1

SWB-2

SWB-3

SWB-4

SWB-5

SWB-6

KRS-218-120

KRS-218-220

KRS-218-320

DOUBLERECEPTACLE &DEAD END BOX

BOX

ONLY

DOUBLERECEPTACLE &FEED-THRU BOX

2KRS-215-120

2KRS-215-220

2KRS-215-320

SWB-7

SWB-8

SWB-9

BOX

ONLY

SWB-10

SWB-11

SWB-12

2KRS-218-120

2KRS-218-220

2KRS-218-320

Class I, Div. 1 & 2, Groups C,D1Class l, Zones 1 & 2, llB,llANEMA 7 (C,D)


KR SERIES • PLUGS AND RECEPTACLES30 AMP 115/230 V.A.C. 7 AMP 460 V.A.C.

PR20


Class I, Div. 1 & 2, Groups C,D1Class I, Zones 1 & 2, llB, llANEMA 7 (C,D)

Lis ted - F i le E23572

See f i les for de ta i ls or ca l l K i l la rk .

KRS/KRJ SERIES PLUG

KRA SeriesKRS Series Plug

K R J R E C E P TA C L E W I T H A J O R J L B O X

K P 3 0 A M P P L U G

CATALOG NUMBER

1Ø, 2-WIRE, 3Ø, 3-WIRE PLUG GROMMET

3-POLE 4-POLE TYPE RANGE

KP-303D23 KP-304D23 D .375- .625

KP-303D45 KP-304D45 D .625- .875

KP-303E45 KP-304E45 E .875-1.125

KP-303E67 KP-304E67 E 1.125-1.375



7 Amps 460 V.A.C. 1¼2 H.P.

– OR –

30 Amps 115/230 V.A.C. 1-1¼2 H.P.

7 Amps 460 V.A.C. 1 H.P.

– OR –

30 Amps 115/230 V.A.C. 3 H.P.

HUB CATALOG NUMBER

SIZE AJC JLC JLX

1/2" — KRJC-1303 KRJX-1303

3/4" KRAJC-2303 KRJC-2303 KRJX-2303

1" KRAJC-3303 — —

1/2" — KRJC-1304 KRJX-1304

3/4" KRAJC-2304 KRJC-2304 KRJX-2304

1" KRAJC-3304 — —

1/2" — JLC-1 JLX-1

3/4" AJC-2 JLC-2 JLX-2

1" AJC-3 — —

1Ø

2-Wire

3-Pole

3Ø

3-Wire

4-Pole

Back

Box

Only

K R S R E C E P TA C L E W I T H S W B B O X2

1 Ø

2-Wire

3-Pole

3 Ø

3-Wire

4-Pole

D Type

CIRCUIT

JL Series boxes shown on page F60. Refer to page headings for suitability of specific items.


RECEPTACLE

ONLY

AJC JLXJLC

KRS-Series

E Type

KRJ-Series

RECEPTACLE ONLY- CATALOG NUMBER KRJ-303

RECEPTACLE ONLY- CATALOG NUMBER KRJ-304

See page PR18 for available

polarization options.

1Ø, 2-WIRE,3-POLEDEAD END BOX

BOX

ONLY

1Ø, 2-WIRE,3-POLEFEED THRU BOX

BOX

ONLY

KRS-215-1303

KRS-215-2303

KRS-215-3303

SWB-1

SWB-2

SWB-3

SWB-4

SWB-5

SWB-6

KRS-218-1303

KRS-218-2303

KRS-218-3303

3Ø, 3-WIRE,4-POLEDEAD END BOX

BOX

ONLY

3Ø, 3-WIRE,4-POLEFEED THRU BOX

BOX

ONLY

KRS-215-1304

KRS-215-2304

KRS-215-3304

SWB-1

SWB-2

SWB-3

SWB-4

SWB-5

SWB-6

KRS-218-1304

KRS-218-2304

KRS-218-3304

CATALOG NUMBER - SINGLE GANG ONLY

KRS-303 KRS-304

1KRS Series receptacles - Class I, Group D.

2SWB Series mounting splice boxes for receptacles shown above listed on page C19.

Two gang models not available.


HUB

SIZE

1/2"

3/4"

1"


KR SERIES • PLUGS AND RECEPTACLES60 AMP/115/230 V.A.C. • 30 AMP/460 V.A.C.

PR21


PR

Lis ted F i le No. E23572KRJ Series KRA Series Plug

Class I, Div. 1 & 2, Groups C,DClass l, Zones 1 & 2, llB,llANEMA 7 (C,D)

K R R E C E P TA C L E A S S E M B L I E S

J A L T Y P E M O U N T I N G B O X E S

CATALOG NUMBER

1Ø, 2-WIRE 3Ø, 3-WIRE SPLICE

3-POLE 4-POLE BOX ONLY

KRJX-3603 KRJX-3604 JALX-3

KRJX-4603 KRJX-4604 JALX-4

— — —

KRAJAC-4603 KRAJAC-4604 AJAC-4



KRAJAT-4603 KRAJAT-4604 AJAT-4

KRAJAT-5603 KRAJAT-5604 AJAT-5

KRJ-603 KRJ-604 —

HUB

SIZE

1"

1-1/4"

1-1/4"

1-1/2"

2"

1-1/4"

1-1/2"

HUB

STYLE

“X”-3 Close-up

Plugs Suppl ied

Feed Thru

Top and

Bot tom

T Sides and Top

JAL Ser ies

Boxes

AJA Ser ies

Boxes

KP Type PlugsKRJ-60 Type Receptacles

JAL Type

HUB A B C D E H

1" 2-3/8" 1-5/32" 4-5/8" 5-1/4" 4-1/8" 5/16"

1-1/4" 3-1/8" 1-17/32" 4-5/8" 5-1/4" 4-1/8" 5/16"

Dimensions-Back Boxes

AJAC Types

AJAT Type

K R 6 0 A M P P L U G S

CATALOG NUMBER

1Ø, 2-WIRE, 3Ø, 3-WIRE GROMMET

3-POLE 4-POLE RANGE

KP-603D345 KP-604D345 .500- .875

KP-603E45 KP-604E45 .875-1.125

KP-603E67 KP-604E67 1.125-1.375

— KP-604F34 1.250-1.500

— KP-604F56 1.500-1.750



30 Amps 460 V.A.C. 3 H.P.

– OR –

60 Amps 115/230 V.A.C. 3 H.P.

30 Amps 460 V.A.C. 5 H.P.

– OR –

60 Amps 115/230 V.A.C. 5 H.P.

1 Ø

2-Wire

3-Pole

3 Ø

3-Wire

4-Pole

RECEPTACLE ONLY

BOX

STYLE

NOTE: For dead end box, use AJAC Series and CUP Series close-up plug.


See page PR18 for available polarization

options.


ACCEPTOR® SERIES • PLUGS AND RECEPTACLESUGR/UGP INTERCHANGEABLE BLADE STYLE

PR22


The ACCEPTOR® UGP/UGR Plug andReceptacle system, with its unique,patented design, is interchangeable1with other NEMA bladed type explo-sion-proof and dust ignition proofdevices. The series has been testedand classified for use with Crouse-Hinds® Ark-Gard®2 and Appleton® U-Line® plugs and receptacles in haz-ardous locations.1 No w available inGFCI version. See page PR26.

How The Acceptor System WorksACCEPTOR receptacles contain anintegral switch which must be closed toenergize the circuit. The design permits only an approved plug to beenergized. To actuate the switch, theplug must be inserted and rotatedclockwise approximately 45o. The plugwill lock into this position preventingaccidental disengagement. To remove,simply push in then turn the plug coun-terclockwise and pull straight out.

Plugs and receptacles may be usedwhere interchangeable bladed devicesare needed in locations made haz-ardous by the presence of flammablegases or vapors, combustible dusts oreasily ignitable fibers and flyings.

Plug can serve to provide power for portable equipment used in bothhazardous and non-hazardous areas.

Applications• Petroleum Refineries

• Chemical Plants

• Wet/Damp Areas

• Corrosive Environments

• Petroleum Plants

• Grain Elevators /Feed Mills

• Flour and Feed Mills

• Indoor or Outdoor Locations

Features• All external hardware is 316 stainless steel

to provide low maintenance and long life

• Factory sealed chamber in UGR recepta-cle contains switch's arcing components

• No additional external seals are required,except in Group B applications

Quick Wiring Plug

• Single piece shell for fewer parts

• Transparent wiring entrance holes for easyconductor insertion

• Screws tighten from side with “full sized”screwdriver

Class I, Div. 1 & 2, Groups B2,C,DClass I, Zones 1 & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F,GClass IIINEMA 3, 7 (B,C,D), 9 (F,G)

Lis ted F i le No. E91049 and/or E53660


• Receptacles are U.L. Listed asraintight. Proper sealing againstmoisture is assured

• Spring loaded receptacle cover clos-es when plug is removed to provideprotection when not in use

• Copper-free aluminum (less than4/10 of 1%) alloy resists corrosion

• Electrostatically applied and baked powder epoxy/polyester finish

PLUGACCEPTOR® plugs conform to NEMAconfigurations and can be used withstandard receptacles in non-hazardous areas to maximize equipment utilization.The system's “turn to engage” feature

1.51" 1.69"

2.55"

2Plugs Rated Group B when used with properly rated &

installed receptacles. See next page.

1Exact models classified for interchangeability are

listed in the information sheet provided with the

products. Ark-Gard® is a registered trademark of

Crouse-Hinds®. U-Line® is a registered trademark of Appleton Electric Company®.

UGP-15231 UGP-15231QW

UGP-15232 UGP-15232QW

NEMA

CONFIGURATION

locks in plug and can be used to pre-vent accidental disengagement of criti-cal equipment.

Plugs for use with type S, SO, ST orSTO heavy duty cord.

15 AMP PLUG

W/QUICK WIRING

15 AMP

PLUG

CATALOG NUMBER

20 AMP PLUG

W/QUICK WIRING

20 AMP

PLUG

CATALOG NUMBER

UGP-20231 UGP-20231QW

UGP-20232 UGP-20232QW

NEMA

CONFIGURATIONVOLTAGE

125VAC

250VAC

kbt>QW

Quick Wiring Plug


R E C E P TA C L E S A N D A S S E M B L I E S4

ACCEPTOR® SERIES • PLUGS AND RECEPTACLESUGR INTERCHANGEABLE BLADE STYLE

PR23

PR

—

1/2"

3/4"

1"

1/2”

3/4"

1"

—

1/2"

3/4"

1"

1/2”

3/4"

1"

HUB

SIZE

RECEPTACLE ONLY

DEAD END

FEED-THRU

RECEPTACLE ONLY

DEAD END

FEED-THRU

ENCLOSURE

STYLE

NEMA RATING

& CONFIGURATION

1Items in this column are suitable for Class I, Group B in addition to Class I, Groups C, D.

Also suitable for Class I, Zone 1, Groups IIB+H2, IIA.

2Seals must be installed within 6 inches of conduit opening.

3Items in this column may also be used in Class I, Zone 1, Groups IIB, IIA.

Assembly numbers not rated for Group B are shipped as receptacle & back box components.

4Refer to page C19 for additional SWB Series Back Box configurations.

5Canada only configuration

6Canadian Codes now allow “T” combination slots for 15A or 20A plugs. Check breaker and wire feed size for proper application ratings.

NOTE: For replacement receptacle cover and hinge, order KIT-173.

2 POLE

3 WIRE

2 POLE

3 WIRE

—

1/2"

3/4"

1"

1/2”

3/4"

1"

RECEPTACLE ONLY

DEAD END

FEED-THRU

2 POLE

3 WIRE

—

1/2"

3/4"

1"

1/2”

3/4"

1"

RECEPTACLE ONLY

DEAD END

FEED-THRU

2 POLE

3 WIRE

20 Amp

125 Volt

20 Amp

250 Volt

15 Amp

250 Volt

15 Amp

125 Volt

5-20R

5-15R

6-15R

6-20R

UGRO-20231

UGR7-20231

UGR8-20231

UGR9-20231

UGR10-20231

UGR11-20231

UGR12-20231

UGROC-15231

UGR7C-15231

UGR8C-15231

UGR9C-15231

UGR10C-15231

UGR11C-15231

UGR12C-15231

UGRO-20232

UGR7-20232

UGR8-20232

UGR9-20232

UGR10-20232

UGR11-20232

UGR12-20232

UGROC-15232

UGR7C-15232

UGR8C-15232

UGR9C-15232

UGR10C-15232

UGR11C-15232

UGR12C-15232

UGRO-20231

UGR1-20231

UGR2-20231

UGR3-20231

UGR4-20231

UGR5-20231

UGR6-20231

UGROC-15231

UGR1C-15231

UGR2C-15231

UGR3C-15231

UGR4C-15231

UGR5C-15231

UGR6C-15231

UGRO-20232

UGR1-20232

UGR2-20232

UGR3-20232

UGR4-20232

UGR5-20232

UGR6-20232

UGROC-15232

UGR1C-15232

UGR2C-15232

UGR3C-15232

UGR4C-15232

UGR5C-15232

UGR6C-15232

—

UGRB1-20231

UGRB2-20231

UGRB3-20231

UGRB4-20231

UGRB5-20231

UGRB6-20231

—

UGRB1C-15231

UGRB2C-15231

UGRB3C-15231

UGRB4C-15231

UGRB5C-15231

UGRB6C-15231

—

UGRB1-20232

UGRB2-20232

UGRB3-20232

UGRB4-20232

UGRB5-20232

UGRB6-20232

—

UGRB1C-15232

UGRB2C-15232

UGRB3C-15232

UGRB4C-15232

UGRB5C-15232

UGRB6C-15232

SINGLE GANG12GROUPS B, C, D, F & G

SINGLE GANG34GROUPS C, D, F, & G

DOUBLE GANG34GROUPS C D, F, & G

SWB-1, 2, 3 SWB-4, 5, 6 Single Gang Double Gang

5

6

5

6


PR24

NEMA CONFIGURATION CATALOG NUMBER WEATHER RATING125V CONNECTOR CAP STYLE

250V CONNECTOR CAP STYLE

20 Amp

125 Volt

2 POLE

3 WIRE

20 Amp

250 Volt

2 POLE

3 WIRE

6-20R with T-slots

Breech-Lock with NotchFlip Type

5-20R with T-slots


Killark 250V Plugs20 Amp15 Amp

Killark 125V Plugs

20 Amp15 Amp

UGRC-20231B

UGRC-20231F

3UGP-20231QW

UGP-15231QW

UGRC-20232B

UGRC-20232F

3UGP-20232QW

UGP-15232QW

N4X*N3**

N4X*N3**

ACCEPTOR® SERIES • PLUGS AND RECEPTACLESUGRC CONNECTORS


Connector with Breech-Lock Cap “3rd Hand” Plug Operation

Class I, Div. 1 & 2, Groups B,C,D1

Class I, Zones 1 & 2, Groups IIB+H2, IIA1

Class II, Div. 1 & 2, Groups F,G2

Class IIINEMA 3, 4X*


UGRC Connector

Breech cap model shown, Flip cap model dimensions

are similar

CONNECTORS

The ACCEPTOR® UGRC Connector com-plements UGP/UGR Plugs andReceptacles, as well as Ground FaultProtected UGFI and UGRGF Models.

Used with Acceptor plugs, connectors canextend the reach for hazardous location ratedportable equipment such as hand lamps.Connectors eliminate the need for user cre-ated corded box mounted receptacles.

UGRC Connectors are interchangeableand classified for use with other NEMAbladed type explosion-proof and dustignition proof plugs, including Crouse-Hinds® Ark-Gard®2 and Appleton®ULine®.

Features• Available with the exclusive Breech-Lock

Cap (see PR3 for more info) - patentednotch provides “3rd hand” plug operation(holds lid open while one hand operatesplug, and other holds connector).

• Factory Sealed Construction

• Suitable for 14 or 12 gauge SOOW orsimilar cable

• Copper-free aluminum (less than 4/10 of1%) alloy resists corrosion

• Electrostatically applied and baked pow-der epoxy/polyester finish

• Dead Front Construction with integralswitch - requires Hazardous Rated NEMABladed plug for operation

Ark-Gard® is a registered trademark of Crouse-Hinds®U-Line® is a registered trademark of AppletonElectric Company®

Industrial Applications• Petroleum Refineries• Chemical/Petrochemical Plants• Oil Rigs & Platforms• Wet/Corrosive Environments• Grain Elevators

Dimensions

1

2

Connector shown with Acceptor UGRP receptacle mounted

in explosion proof Quantum® enclosure

8.25

2.883.69

*Breech cap models N4X with lid closed and turned, N3 When Plug inserted Hinge Up

**Flip Lid models N3 with hinge in UP position with or without plug

Replacement Cap and Hinge Kits: Breech KIT-173B, Flip KIT-173

1CSA certified Class I Div.I for Canada and/or other jurisditions accepting CSA.

2CCSAUS Class II, Groups F & G for US and Canada.

3Remove QW in catalog number for Standard Wiring type plug.

Flip Cap

Cer t i f i ed F i le No. LR14667C US

UGP Plug


PR25

PR


ACCEPTOR® SERIES • PLUGS AND RECEPTACLESUGRP PANEL MOUNT RECEPTACLES

* UGRP Receptacles are available “Factory Installed” in the following series:Enclosures - Series EXB, B7E Distribution Equipment-Series D2L, B7L Lighting Panelboards* Contact factory for ordering information

Class I, Div. 1 & 2, Groups B,C,D1

Class I, Zones 1 & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F,GClass IIINEMA 3, 4X*

Cer t i f i ed F i le No. LR146672C USTypical InstallationBreech Cap Model

Typical CLI Div. Iapplication

Typical CLI Div. 2application2-3/8” K.O.

Breech Caps

Flip Lids

NEMA CONFIGURATION CATALOG NUMBER WEATHER RATING125V PANEL RECEPTACLE CAP STYLE

250V PANEL RECEPTACLE CAP STYLE

20 Amp

125 Volt

2 POLE

3 WIRE

6-20R with T-slots


5-20R with T-slots


Killark 250V Plugs***20 Amp15 Amp

Killark 125V Plugs***

20 Amp15 Amp

UGRP-20231B

UGRP-20231F

3UGP-20231QW

UGP-15231QW

UGRP-20232B

UGRP-20232F

3UGP-20232QWUGP-15232QW

N4X*N3**

N4X*N3**

*Breech cap models N4X with lid closed and turned, N3 When Plug inserted Hinge Up

**Flip Lid models N3 with hinge in UP position with or without plug

***See PR24 for Plug NEMA Diagram and Dimensions

Replacement Cap and Hinge Kits: Breech KIT-173B, Flip KIT-173

1Class I Div.1 B,C,D in enclosures certified to 325 explosive PSI (2”-11½ NPSM threads).

Class I Div. 2 in standard location enclosures using only non-arcing components.

2cCSAus Certified for United States, Canada, and other jurisdictions accepting the mark.

3Remove QW in catalog number for Standard Wiring type plug.

20 Amp

250 Volt

2 POLE

3 WIRE

Flip Cap

Breech Cap model shown.

Flip Cap model dimensions are similar

PANEL RECEPTACLES

The ACCEPTOR® UGRP PanelReceptacle complements UGP/UGR Plugsand Receptacles, as well as Ground FaultProtected UGFI and UGRGF Models.

Used with Acceptor plugs, panel recepta-cles provide local power for hazardous loca-tion rated portable equipment such as handlamps. Units are suitable for Class I Div. 1or Class I Div.2 depending on the enclo-sure type used1.

UGRP Panel Receptacles are inter-changeable and classified for use withother NEMA bladed type explosion-proofand dust ignition proof plugs, includingCrouse-Hinds® Ark-Gard®2 andAppleton® ULine®.

Features• Available with the exclusive Breech-Lock

Cap (see PR3 for more info) - patentednotch provides “3rd hand” plug opera-tion (holds lid open while one handoperates plug, and other holds connector).

• Factory Sealed Construction

• Copper-free aluminum (less than 4/10 of1%) alloy resists corrosion

• Electrostatically applied and bakedpowder epoxy/polyester finish

• Dead Front Construction with integralswitch - requires Hazardous RatedNEMA Bladed plug for operation

Ark-Gard® is a registered trademark of Crouse-Hinds®U-Line® is a registered trademark of AppletonElectric Company®

Industrial Applications• Petroleum Refineries• Chemical/Petrochemical Plants• Oil Rigs & Platforms• Wet/Corrosive Environments• Grain Elevators

Dimensions

3.69

4.50

2.94

Breech Lid


X H L I N C A N D E S C E N T

ACCEPTOR® SERIES • PLUGS AND RECEPTACLESADAPTER AND ACCESSORIES

PR26


U G R A A D A P T E R K I T

XHL SERIES HAND LAMPSUNIVERSAL ADAPTER KITACCEPTOR® receptacles are availablewith an adapter kit for mounting toCrouse-Hinds® EDS Series or Appleton®

EFD Series back boxes.

ACCEPTOR receptacles properlyinstalled with these adapter kits areU.L. Listed for use in Class I, Div. 2,Groups B,C,D hazardous locations andZone II, Groups IIB + H2, IIA.

Kit contains one ACCEPTOR® recepta-cle plus adapter plate and mountingbolts.

UGRA-20231

UGRA-20232

ADAPTER KIT

CATALOG NUMBER

NEMA RATING

& CONFIGURATION

2 POLE

3 WIRE

2 POLE

3 WIRE

Features

• Factory Sealed

• Test and Reset push buttons are provided on cover assembly, with optional pilot light available1Unit should be tested monthly

• Includes new GFCI to meet latestUL943 GFCI standards revisions

• Exterior gasket provides NEMA 3weatherproof protection

• Ground boss for grounding in thesplice box

• Color coded wiring and stainless steel-cover bolts

• Receptacle used is UGRO-20231.See page PR23


XHLF FluorescentClass I, Div. 1 & 2, Groups C,DClass l, Zones 1 & 2, Groups llB,llAClass lI, Div. 1 & 2, Groups E,F,G

XHLF26 Fluorescent hand lamp

XHLF26-50KP

Fluorescent hand lamp wi th

- 50 ' o f 16/3 SOW cord and

15A Acceptor p lug

5-20R

20 Amp 125 Volt

6-20R

20 Amp 250 Volt

XHL-100

XHL-GL

XHLG

XHLS

Handlamp

Replacement g lobe

Replacement guard

Replacement socke t



XHL IncandescentClass I, Div. 1 & 2, Groups C,DClass l, Zones 1 & 2, Groups llB,llA

Class I, Div. 1 & 2, Groups C,DClass l, Zones 1 & 2, Groups llB,llAClass lI, Div. 1 & 2, Groups F,GClass IIINEMA 3, 7(C,D) 9(F,G)




NEMA RATING &

CONFIGURATION

20A, 125V, 2P, 3W

ENCLOSURE

STYLE

Dead End

Dead End

Dead End

Feed Thru

Feed Thru

Feed Thru

A handy accessory to the ACCEPTOR®

Series, these hand lamps can be usedas an illumination source where flam-mable materials are present, such asprocessed finish goods, storage vats,or handling areas.

See page L14 for detailedinformation and features.

UGRA

Cer t i f i ed LR14667

Cer t i f ied LR11714

See f i les for deta i ls or ca l l Ki l lark .

1 For Red LED pi lot l ight ind icator of l ive

c i rcu i t , add “-PL” to cata log number.

Example - UGRGF107-PL.

XHL XHLF UGRGF

XHLF FLUORESCENT (120VAC)

GFI PROTECTED RECEPTACLEUtilizes FXS GFI and ACCEPTOR®

receptacle to interrupt a circuit, when aground fault is detected on equipmentwhich may be handled by personnel inhazardous locations.

Electrical Rating

GFI units are rated at 20A, 120 VAC,

60Hz. Class A.

4-6 miliamp trip setting

Trip Time-UL Curve

HUB

SIZE

1/2”

3/4”

1”

1/2”

3/4”

1”

CATALOG1NUMBER

UGRGF107

UGRGF108

UGRGF109

UGRGF110

UGRGF111

UGRGF112


1/2” HUB UGFI202C3


1” HUB UGFI202C3



1” HUB UGFI152C3

ACCEPTOR® SERIES • PLUGS AND RECEPTACLESADAPTER AND ACCESSORIES

PR27


PRThe GFCI protected ACCEPTOR® is the

solution to OSHA's requirements for

GFCI protection when using portable

equipment in hazardous and wet loca-

tions. For use with 125V, or125/250V315 or 20 amp receptacles without GFCI

protection, the Adapter Unit provides

GFCI and circuit protection to connect-

ed apparatus by simply being plugged

into an existing receptacle.

The Hard-Wired Unit provides the

same protection and is used directly

as a GFCI protected device. Units are

feed-through with one close-up plug.



PUSH TOTEST

OF

FON

RESET

Typical Application with

XHL Series Hand Lamp

PUSH TOTEST

OF

FON

RESET

7 3/86

6 1/8

7 7/8

Hard-Wired Unit

• Adapter UnitClass I, Div. 2, Groups B,C,DClass I, Zone 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F,GClass III, Div. 1 & 2

• Hard-Wired UnitClass I, Div. 1 & 2, Groups B,C,DClass I, Zones 1 & 2, Groups IIB+ H2, IIAClass II, Div. 1 & 2, Groups F,GClass III, Div. 1 & 2

NEMA 3 ENCLOSURE TYPE(Adapter or Hard-Wired units)

Adapter Unit• No need to permanently alter existing

installations; Portable Unit can betemporarily hung using included strapnear an existing receptacle whereverprotection is required

• Factory Sealed Unit

• Acceptor® plug and cord set includedwith Adapter Unit. Cord is 36"

Hard-Wired Unit• provides GFCI and circuit protection in

new installations, or as an upgrade orreplacement for non-GFCI receptacles

• Factory Sealed, except Group B

Adapter and Hard-Wired Unit• GFCI device also provides circuit

protection, for connected apparatus,against current overload and shortcircuits

• Acceptor® receptacles and plugs are intermateable with bothCrouse-Hinds® Ark-Gard®2 andAppleton® U-Line® products

• Amber pilot light provides indicationthat the receptacle is energized.

• Units can be Padlocked OFF for main-tained safety

• Fully gasketed GFCI compartmentprevents moisture from damagingelectronic components

• Same high quality materials as the standard ACCEPTOR

®

1Hard-Wired assemblies in Group B areas require

sealing within 6" of enclosure.

2125VAC & 250 VAC devices are C CSA US

certified;125VAC devices are also UL Listed.

32P 250V units are for 2 “hot line” applications

and include 2P 5mA GFI breakers. 2P Units are

for 20/240V or 120/208Y Grounded Power Supply

Systems ONLY. Do NOT use with Delta supply

systems.

Ark-Gard® is a registered trademark of Crouse-Hinds®

U-Line® is a registered trademark of Appleton Electric

Company®.

Adapter Unit

UGFIGROUND FAULTPROTECTOR

5-20R

5-15R

6-20R

6-15R

20A

125V

2

15A

125V

2

1/2” HUB UGFI20C1

3/4” HUB UGFI20C2

1” HUB UGFI20C3

1/2” HUB UGFI15C1

3/4” HUB UGFI15C2

1” HUB UGFI15C3

5-20R

5-15R

6-20R

6-15R

20A

250V

23

15A

250V

23

HARD WIRED (PERMANENTLY MOUNTED)

GFCI RECEPTACLE

kbt>2P 250V GFI

G F C I R E C E P TA C L E A D A P T E R ( W / C O R D S E T )

20A

125V

2

15A

125V

2

20A

250V

23

15A

250V

23

UGFI20AD

UGFI15AD

UGFI202AD

UGFI152AD

C US


Section PR - The Reynolds Company · PDF fileVERSAMATE® SERIES • PLUGS AND...

Documents

Transcript of Section PR - The Reynolds Company · PDF fileVERSAMATE® SERIES • PLUGS AND...