SEAT RANGE ARC - eheim-moebel.de
Transcript of SEAT RANGE ARC - eheim-moebel.de
ARC SEAT FAMILY | OVERVIEW THE RIGHT SEAT FOR ANY DEMAND
LITE SLIM
LITE COMPACT(RETRACTABLE)
LITE BASIC
LITE PLUS
ONEBASIC
GENERAL SEATING
BLOW MOULDED INJ. MOULDED, PADDED
BOX SEATING
2
The ARC seat family offers a unique variety of seats from simple and economical to luxurious and exclusive. Its signature arc-shaped design incorpo-rates a consistent style throughout, whilst deliver-ing the key assets of comfort and durability. All seats are based on the same sturdy beam construc-tion for easy seat alignment on site. Consoles for floor or riser mounting made of hot-dip galvanized steel can easily be adapted to the specific step con-figurations. A great variety of beam-mounted arm-rests, panels and cupholders are available to com-plete the range.
ONEBASIC
ONEPLUS
MAXII
VIP VIPFIX
INJ. MOULDED, PADDEDFULLY UPHOLSTERED
BOX SEATING VIP SEATING
3
379
440 414
450 min.
110
460
220
1°
70
544
800
ARC LITE SLIM FA (2018)
SPECS ARC LITE 2018 SLIM FA 1:16 16.10.2018ARC LITE 2018
EHEIM Möbel GmbH ÖhringenFriedrichsruher Str. 2174613 Öhringen, [email protected]
ARC LITE SLIMTIP-UP GENERAL SEATING
4
Beam-mounted, spring-based tip-up chair with ergonomically shaped seat and backrest made of blow moulded polypropylene with FR and UV re-sistant additives. Seat carriers and levers made of reinforced polyamide (PA 6.6 GF 30) with impact resistant modifiers. Strength tested according to DIN EN 12727 level 4 and safe designed according to DIN EN 16139. Beam sub construction made of hot-dip galvanized steel. Beam dimensions 60x40x3 mm.
„SLIM“ version for cc 450 to 490 mm.Floor or Riser mounted.
5
800
0
424
485 454
490 min.
110
460
545 220
1°
70
ARC LITE BASIC FA (2018)
SPECS ARC LITE 2018 BASIC FA 1:16 16.10.2018ARC LITE 2018
EHEIM Möbel GmbH ÖhringenFriedrichsruher Str. 2174613 Öhringen, [email protected]
ARC LITE BASIC TIP-UP GENERAL SEATING
6
Beam-mounted, spring-based tip-up chair with ergonomically shaped seat and backrest made of blow moulded polypropylene with FR and UV re-sistant additives. Seat carriers and levers made of reinforced polyamide (PA 6.6 GF 30) with impact resistant modifiers. Strength tested according to DIN EN 12727 level 4 and safe designed according to DIN EN 16139. Beam sub construction made of hot-dip galvanized steel. Beam dimensions 60x40x3 mm.
„BASIC“ version for cc 490 to 520 mm.Floor or Riser mounted.
7
200
800
110 424
485 454
520 min.
570 50
460
545
220
200
1°
656
346
ARC LITE BASIC RA (2018) & MULTI FS
SPECS ARC LITE 2018 BASIC RA 1:16 16.10.2018ARC LITE 2018
EHEIM Möbel GmbH ÖhringenFriedrichsruher Str. 2174613 Öhringen, [email protected]
ARC LITE BASIC & ARMREST TIP-UP GENERAL SEATING
8
Beam-mounted, spring-based tip-up chair with ergonomically shaped seat and backrest made of blow moulded polypropylene with FR and UV re-sistant additives. Seat carriers and levers made of reinforced polyamide (PA 6.6 GF 30) with impact resistant modifiers. Strength tested according to DIN EN 12727 level 4 and safe designed according to DIN EN 16139. Beam sub construction made of hot-dip galvanized steel. Beam dimensions 60x40x3 mm.
„BASIC“ version with shared arm for cc 520 to 550 mm.Floor or Riser mounted.
9
200
904
110 424
453 485
520 min.
570 50
460
200
1°
656
380 256
579
ARC LITE PLUS RA (2018) & MULTI FS
SPECS ARC LITE 2018 PLUS RA 1:16 16.10.2018ARC LITE 2018
EHEIM Möbel GmbH ÖhringenFriedrichsruher Str. 2174613 Öhringen, [email protected]
ARC LITE PLUS | (WITH ARMREST) TIP-UP GENERAL SEATING
10
Beam-mounted, spring-based tip-up chair with ergonomically shaped seat and backrest made of blow moulded polypropylene with FR and UV re-sistant additives. Seat carriers and levers made of reinforced polyamide (PA 6.6 GF 30) with impact resistant modifiers. Strength tested according to DIN EN 12727 level 4 and safe designed according to DIN EN 16139.Beam sub construction made of hot-dip galvanized steel. Beam dimensions 60x40x3 mm.
„PLUS“ version with 100 mm higher backrest.With or without armrest. cc 490 to 550 mmFloor or Riser mounted.
11
110
480
420
450
520 min
570 50
460
200
1°
800
589
657
346
ARC ONE BASIC RA (2018) & MULTI FS
SPECS ARC ONE 2018 BASIC RA 1:16 16.10.2018ARC ONE 2018
EHEIM Möbel GmbH ÖhringenFriedrichsruher Str. 2174613 Öhringen, [email protected]
ARC ONE | WITH ARMREST TIP-UP BOX SEATING
12
Beam-mounted, spring-based tip-up chair with upholste-red seat and backrest. Upholstery made of synthetic leather and cold cured moulded foam in density 60kg/m3. Seat and backrest outer shells made of injection moulded polypropy-lene with FR and UV resistant additives. Seat carriers made of hot-dip galvanized steel. Levers and pivots made of rein-forced polyamide (PA 6.6 GF 30) with impact resistant mo-difiers. Strength tested according to DIN EN 12727 level 4 and safe designed according to DIN EN 16139. Beam-mounted, shared armrests made of KTL and powder coated steel with PU covers. Beam sub construction made of hot-dip galva-nized steel. Beam dimensions 60x40x3 mm.
With shared armrest. cc 520 to 550 mmFloor or Riser mounted.
13
ARC MAX II | WITH MULTI CUP TIP-UP BOX SEATING
110
480
426
451
570 min
554 120
94
460
200
1°
900
657
625 470
ARC MAX II RA (2018) & CUPHOLDER FS
SPECS ARC MAX II 2018 RA 1:16 16.10.2018ARC ONE 2018
EHEIM Möbel GmbH ÖhringenFriedrichsruher Str. 2174613 Öhringen, [email protected]
14
Beam-mounted, spring-based tip-up chair with fully uphols-tered seat and upholstered backrest. Seat upholstery made of synthetic leather and cut foam KF 5560. Backrest uphols-tery made of synthetic leather and cold cured moulded foam in density 60kg/m3. Backrest outer shell made of injection moulded polypropylene with FR and UV resistant additives. Extended backrest height (+100 mm) for enhanced com-fort and aesthetics. Seat carriers made of hot-dip galvanized steel. Levers and pivots made of reinforced polyamide (PA 6.6 GF 30) with impact resistant modifiers. Strength tested according to DIN EN 12727 level 4 and safe designed according to DIN EN 16139.Beam-mounted, individual armrests made of KTL and pow-der coated steel with PU covers and cup holders.Beam sub construction made of hot-dip galvanized steel. Beam dimensions 60x40x3 mm.
15
110
480
426
464
535 min
595 60
460
200
1°
900
427 639
669
ARC VIP RA (2018) & PANEL
SPECS ARC VIP 2018 RA 1:16 16.10.2018ARC ONE 2018
EHEIM Möbel GmbH ÖhringenFriedrichsruher Str. 2174613 Öhringen, [email protected]
ARC VIP | WITH SHARED PANEL TIP-UP VIP SEATING
16
Beam-mounted, spring-based tip-up chair with fully uphols-tered seat and backrest. Seat upholstery made of synthetic leather and cut foam KF 5560. Backrest upholstery made of synthetic leather and cut foam KF 3540. Seat carriers made of hot-dip galvanized steel. Levers and pivots made of rein-forced polyamide (PA 6.6 GF 30) with impact resistant mo-difiers. Strength tested according to DIN EN 12727 level 4 and safe designed according to DIN EN 16139.Individual armrest panels, fully upholstered with synthetic le-ather and foam lining.Beam sub construction made of hot-dip galvanized steel. Beam dimensions 60x40x3 mm.
With shared panel. cc 535 to 550 mmFloor or Riser mounted.
17
110
480
426
464
600 min
596 92
460
200
1°
900
639
669
530
ARC VIP RA (2018) & TWIN PANEL & CUP
SPECS ARC VIP 2018 RA 1:16 16.10.2018ARC ONE 2018
EHEIM Möbel GmbH ÖhringenFriedrichsruher Str. 2174613 Öhringen, [email protected]
ARC VIP | WITH TWIN PANEL & CUP TIP-UP VIP SEATING
18
Beam-mounted, spring-based tip-up chair with fully uphols-tered seat and backrest. Seat upholstery made of synthetic leather and cut foam KF 5560. Backrest upholstery made of synthetic leather and cut foam KF 3540. Seat carriers made of hot-dip galvanized steel. Levers and pivots made of rein-forced polyamide (PA 6.6 GF 30) with impact resistant mo-difiers. Strength tested according to DIN EN 12727 level 4 and safe designed according to DIN EN 16139.Individual armrest panels, fully upholstered with synthetic le-ather and foam lining. Beam sub construction made of hot-dip galvanized steel. Beam dimensions 60x40x3 mm.
With double panel and cupholder. cc 600 mmFloor or Riser mounted.
19
464 480
600 min.
60 600
110
460
1°
900
60
666 478
670
ARC VIP FIX FA (2018) & TWIN PANEL
SPECS ARC VIP 2018 FIX FA 1:16 16.10.2018ARC VIP 2018
EHEIM Möbel GmbH ÖhringenFriedrichsruher Str. 2174613 Öhringen, [email protected]
ARC VIP FIX | WITH TWIN PANEL FIX VIP SEATING
20
Beam-mounted, fixed chair with fully upholstered seat and backrest. Seat upholstery made of synthetic leather and cut foam KF 5560. Backrest upholstery made of synthetic lea-ther and cut foam KF 3540. Seat carriers made of hot-dip galvanized steel.
Individual armrest panels, fully upholstered with synthetic le-ather and foam lining. Enlarged dimensions and increased foam cushion for enhanced comfort and aestheticsBeam sub construction made of hot-dip galvanized steel. Beam dimensions 60x40x3 mm.
With double panel. cc 600 mmFloor or Riser mounted.
21
ARC LITE SWIVEL-BASE | & TIP-UP DESK PRESS TIP-UP SEATS WITH TABLE
448 550
600
300
20 400 198
100
0
52,5
1250
720
1198
220 360
460
with spring, floor mountedtable with 1/3 tip-up deskARC LITE BASIC | press seat
SPECS ARC LITE BARCA Presse 1:16 10.05.2017Seat family ARC
22
Beam-mounted, spring-based tip-up chair with ergonomically shaped seat and backrest made of blow moulded polypropylene with FR and UV re-sistant additives. Seat carriers and levers made of reinforced polyamide (PA 6.6 GF 30) with impact resistant modifiers. Strength tested according to DIN EN 12727 level 4 and safe designed according to DIN EN 16139.Swivel base for easy access.
Different desk options upon request. Shown: Fixed table with 1/3 tip-up desktop for easy ac-cess. 2/3 fixed table-top for easy storage. Metal sub-construction with solid core panel.
23
EHEIM Möbel GmbH ÖhringenHeadquarters
Postfach 132574603 Öhringen | Germany
Tel.: +49 (0)7941 92 20-0Fax: +49 (0)7941 92 20-30
Northern branch office
Ratsstr. 716269 Wriezen | Germany
Tel.: +49 (0)33456 15 94 01Fax: +49 (0)33456 15 94 03
EHEIM Seating Sp. z o.o.
ul. Kołowa 5/1930-134 Kraków | Poland
Tel.: +48 12 313 44 17Fax: +48 12 313 44 17