Sdmc Truma

Leisure Products for caravans and motor caravans

Comfort on the move

Product Cataloguewith recommended pricesvalid from 01. August 2009

Truma (UK) Limited

Index

Air conditioning systems page

Sapphire air conditioning 3

Power inverter 4

Air conditioning accessories 4

Cold air distribution accessories 5 – 6

Caravan movers

Caravan Mover 7

Mover SE 7

Mover TE 7

Mover S 7

Caravan mover accessories 7 – 8

Energy systems

Gas Supply�� – �4 �� – �4

Power supply�� 5 �5

Accessories for electronics �5 �5

Heating systems

Trumatic S 2200 / S 2200 P �7

Trumatic S 3002 / S 3002 P �8 – ��

Trumatic S 5002 / S 5002 E 20

Accessories for cowl ducting 2� – 22

Accessories for heaters Trumatic S 23 23

Additional electric heater Ultraheat 23 23

Trumatic E 2400 24 – 25

Trumatic E 4000 / E 4000 A 26 – 27

Accessories for electronics Trumatic E 27 27

Combi 4 (E), Combi 6 (E) 28

Cowl kits and single cowl parts 2��

Accessories for Trumatic C (EH) 2��

Combi D 6 30

Wall cowls and pipe sets 30

Special tools 3� For installation, please respect the Truma Installation Instructions.

Air technology pagepage

Trumavent fans for the heater Trumatic S 32 32

Multivent fan TBM 32

Warm air ducting accessories 33 – 36 33 – 36

Towel dry��er 36 36

Awning warmer 36 36

Water comfort

Ultrastore 37

Electroboiler 38 38

Truma Therme 38

Water sy��stem accessories 3�� 3��

Ultraflow 40 – 4�

Replacement for Cry��stal Water Sy��stems 4�

Further products

Control panel accessories 42

The right to effect technical modifications is reserved!

Prices and VAT are subject to change.For more information please visit www.trumauk.com.

3

Air

con

dit

ion

ing

sys

tem

s

For installation, please respect the Truma Installation Instructions.

Air-conditioning unit with infrared remote control for caravans and mobile home. Low centre of gravity�� through installation in lower storage compartment. No additional load on the roof. A variety�� of different installation suggestions are provided in the brochure Camping World, which is available on request.

Sapphire compactMax. cooling capacity �800 WPower supply 230 V - 240 V, 50 Hz �2 V with TG �000 sinusPower consumption (230 V) 2.8 A (�2 V) 55 A Start-up current (230 V) �5 A (�50 ms)Weight 20 kg

Part No. £ Ex. VAT £ Incl. 15 % VAT

44080-02 Sapphire compact, suitable for vehicles up to 5.5 m long, including standard installation kit. Cooling is also possible while driving with the TG �000 sinus power inverter (not included in scope of delivery��, see page 4).

��00.3�� 1,035.45

Sapphire comfortMax. cooling capacity 2400 WPower supply 230 V - 240 V, 50 Hz Power consumption 4.2 A Start-up current 20 A (�50 ms) Weight 24 kg

44032-02 Sapphire comfort, suitable for vehicles from 5.5 m and longer, including standard installation kit.

��68.46 1,113.73

Sapphire vario

Power setings � 2 3

Cooling power 600 W �500 W 2000 W

Power consumption (230 V) �.7 A 3.0 A 4.4 A

Power consumption (�2 V) 34 A 60 A -

Power supply 230 V - 240 V, 50 Hz �2 V with TG �000 sinusStart-up current (230 V) 20 A (�50 ms)Weight 27 kg

44060-0� Sapphire vario, for operation at three variable power settings, including standard installation kit.In combination with the TG �000 sinus power inverter (not included) the air conditioning sy��stem can be operated while driving or autonomously��. The intelligent automatic air conditioning sy��stem detects the voltage source that is present. Ideal for installation in false floors because of its low installation height.

�,2��.85 1,494.83

For TG �000 sinus power inverter, see page 4.

4

Air

con

dit

ion

ing

sys

tem

s Power inverterPart No. £ Ex. VAT £ Incl.

15 % VAT

400��0-8�000 TG �000 sinus power inverter Addition that provides convenient, independent use of the Sapphire vario or compact or for independent use of any�� 230 V device up to a maximum current consumption of �000 W.(connecting cable not included)

608.86 700.19

Please order required cable sets

400��0-23�00 Electrical Kit to integrating the TG �000 sinus in the electrical on-board power supply�� of the vehicle

�57.70 181.35

600�0-54500 Cable protection Ø 25 mm, fixed length 2 m (not illustrated)

2.36 2.71

400��0-25��00 Air Conditioning Kit turns the Sapphire vario or Sapphire compact into an intelligent air conditioning sy��stem. The TG �000 sinus automatically�� detects whether the air conditioning sy��stem is being operated from the socket, the alternator or (Sapphire vario only��) the vehicle battery��.

22.��8 26.43

400��0-26200 Autarky�� Kit for independent use of all 230 V devices up to max. power consumption of �000 W

46.75 53.76

400��0-26800 Switch Box Kit For switching between air conditioning mode and autonomous mode

62.5�� 71.98

Accessories for air conditioning units40040-34800 3 m extension cable for Sapphire

comfort IR receiver (not illustrated)�2.�� 14.02

400��0-8��00 3 m extension cable for Sapphire compact and Sapphire vario IR receiver (not illustrated)

27.��7 32.17

40040-2��200 Circulation air intake grill rectangular (extension of air stream 500 cm²)

�5.25 17.54

40040-20400 Circulation air intake grill round (extension of air stream �35 cm², 3 pieces required)

4.74 5.45

400��0-5��00 Flexible room air aspiration complete only�� required if direct room air aspiration is not possible because of the fitting situation, suitable for Sapphire air conditioning units.

��2.68 129.58

5

Air

con

dit

ion

ing

sys

tem

sPart No. £ Ex. VAT £ Incl. 15 % VAT

40040-60�00 Sound muffler for installing in the cold air sy��stem of air conditioning equipment for additional noise reduction in the living area

25.05 28.81

40040-32500 Air outlet channel for minimising noise outside the living area

30.47 35.04

� 2400��0-64600 Fluff filter (�) Sapphire, blue �2.54 14.42

400��0-58�00 Particle filter (2) Sapphire �0.54 12.12

3 4

5

67

40040-�3800 Fluff filter (3) Frostair 1700, 1500 5.��8 6.88

40040-23�00 Particle filter (4) Frostair 1700 �6.76 19.27

40040-23600 Subsequent particle filter (5) Frostair 1700 for circulating air, compl. with mounting frame

2��.��3 34.42

40040-28�00 Fluff filter (6) Frostair 2300 7.48 8.60

40040-27000 Particle filter (7) Frostair 2300 22.3� 25.66

Accessories for cold air distribution

ÜS

KR 65

40200-0� Cold air duct KR 65, Ø 65 mm (per metre) �0.56 12.14

4024�-0� Clip ÜS agate grey��, Ø 65 mm black (to fix the cold air duct to the wall)

0.52 0.60

BGC

40040-32200 Cold air channel (without connector muffs AZ)

82.0� 94.31

40040-24�00 Connector muff AZ (to connect the cold air duct KR 65 to the cold air channel)

�.72 1.98

340��-0� Elbow BGC (to connect the cold air duct KR 65 to the connector muff AZ)

7.7�� 8.96

6

Air

con

dit

ion

ing

sys

tem

s

LT


40�5�-02 T-pipe LT agate grey��for air ducts Ø 65 or 72 mm

�.88 2.16

EM

40�8�-0� Nut EM agate grey�� .25 1.44

EN

40�7�-0� End outlet EN agate grey�� with air throttle, fitting for flow-T LT, end outlet-nut EM, and tubes Ø 65 mm, for further colours please see page 34

�.86 2.14

EN-O

40�7�-07 End outlet EN-O agate grey�� without air throttle, for lamella inset LA

�.�� 1.37

LA

4072�-0� Lamella inset LA agate grey�� to attach onto ending outlet EN-O, direction of air flow is adjustable by�� turning, for further colours please see page 34

0.��2 1.06

SCW 2

Swivelling air outlet SCW 2 a non-closable air outlet for cold air duct KR 65 connection3��7�-0� Swivelling air outlet SCW 2 black ��.66 13.413��7�-02 Swivelling air outlet SCW 2 beige ��.66 13.413��7�-03 Swivelling air outlet SCW 2 basalt grey�� .66 13.41

ANH

RL

402��0-02 Connector ANH black (necessary�� for cold air duct KR 65 connection to the rectangular air outlet)

2.��2 3.36

40280-0� Rectangular air outlet RL black �4.03 16.13

TS

40�5�-0� T-pipe TS agate grey�� 2.42 2.78

Y

40��-0� Y-pipe agate grey�� 3.77 4.34

BG

3��0�0-76400 Elbow BG black 8.�4 9.36

7

Air

con

dit

ion

ing

sys

tem

sC

arav

an m

ove

rs

Caravan Mover with “Smooth Start“ action

Mover SE, TE, S with “Durasoft Drive” and ABE! (inspection by�� a specialist in Germany�� not necessary��)

Max. hill climbing ability Caravan Mover �5 % with a caravan with �700 kg weightMover S, SE �5 % with a caravan with �800 kg weightMover TE �0 % with a caravan with 2250 kg weight

Power supply �2 V

Power consumption Caravan Mover Mover SE, TE, S

Maximum rate 60 A �20 A

Average rate �5 A 20 A

Weight Caravan Mover approx. 30 kg Mover SE, TE approx. 33 kg Mover S approx. 35 kg incl. cross actuation device

optimal 185

min. 30

min. 60

max. 48

min

.180*

max. 1860max. 2400

Caravan - floor

chassis height

* with fully�� loaded vehicle (all dimensions in mm)

Manoeuvring aid with radio remote control and manual engagement / disengagement of the rollers.


6�203-52 Caravan Mover for single axle caravans without shock absorbers,with a total weight up to �700 kg

778.27 895.01

Manoeuvring aid with radio remote control and electrical engagement / disengagement of the rollers.

6�500-02 Mover SE for single axle caravans with a total weight up to �800 kg

�,204.35 1,385.00

6�600-02 Mover TE for twin axle caravans with a total weight up to 2250 kg

�,300.00 1,495.00

Manoeuvring aid with radio remote control and manual engagement / disengagement of the rollers.

6�400-02 Mover S for single axle caravans with a total weight up to �.800, complete, incl. cross actuation device

��.30 1,140.00

Caravan Mover accessoriesSE Mover SE TE Mover TE S Mover S

CM Caravan MoverEM Euro MoverTM Euro Mover Tandem

SETESCMEMTM

600�0-66000 Spacer plate kit (2 spacer plates �5 mm thick), to compensate the height up to 45 mm (using 3 kits)

�2.0�� 13.90

SETESTM

600�0-70000 Screw set additionally necessary to use with the spacer plate kits on a frame with a height of 140 mm to 185 mm

4.64 5.34

Air

con

dit

ion

ing

sys

tem

sC

arav

an m

ove

rs

8

SETESCMEMTM


600�0-64��00 Low chassis kit, consisting of mounting plates, with screws and nuts for installation to chassis with a height of less than 140 mm If the chassis has to be drilled for installation, it must be subsequently�� inspected and approved by�� an officially�� recognised (TÜV) expert, in Germany��.

44.��8 51.73

SESEM

600�0-2�500 Installation kit AL-KO Vario III / AV, absolutely necessary for the reinforcement of the frame of caravans with AL-KO Vario III / AV single chassis

56.20 64.63

SES

60030-0��000 Eriba Touring installation kit, extension to complete the rectangular profile

��0.87 127.50

CMEMTM

60030-35000 Standard chassis kit for installing a Caravan Mover, Euro Mover or Twin Mover on frames with U-profile, minimum height 185 mm

74.70 85.91

CMEM

600�0-00�00 “U” bolt extension kit incl. nuts and washers additionally necessary to use with the spacer plates, for installing a Euro Mover (frame with L profile, height less than 185 mm)

22.37 25.73

CMEM

600�0-�8500 Cross actuation retrofit set for Caravan Mover and Euro Mover, after date of manufacture 03/2003

43.6� 50.15

600�0-��000 Cross actuation additional set, only�� needed for Caravan Mover and Euro Mover before date of manufacture 03/2003, supplementary�� to above-described one-sided operation set (not illustrated)

3�.82 36.59

600�0-76��00 PCB and Handset upgrade for Caravan Mover (not illustrated)

203.77 234.34

��

En

erg

y sy

stem

s –

Gas

Su

pp

ly

Truma low pressure gas regulatorsPart No. £ Ex. VAT £ Incl.

15 % VAT

Low pressure regulator M 20 x �.5, �.5 kg/h, 30 mbar with over pressure protection, complete with test point.

0�2��40� Low pressure regulator 8 mm 3�.23 35.91

0�2��4�� Low pressure regulator �0 mm 3�.23 35.91

026�800 Test point with inlet tube socket 8 mm and 8 mm outlet. The test point can be used when fitting the Triomatic switch-over sy��stem.

�0.28 11.82

026�8�0 Test point, as above with inlet tube socket �0 mm and �0 mm outlet

�0.28 11.82

50020-56000 ��0° elbow for installation between regulator and hose

7.24 8.33

Low pressure regulator, M 20 x �.5, �.5 kg/h, 30 mbar with over pressure Protection, integrated elbow ��0° and test point.

0�2��46� Low pressure regulator 8 mm 36.34 41.79

0�2��462 Low pressure regulator �0 mm 36.34 41.79

�0

En

erg

y sy

stem

s –

Gas

Su

pp

lyGas Supply for operation while driving

The Drive Safe regulator which is mounted on the wall with gas flow monitor and integrated test connection complies with the regulations for operating liquid gas heaters while driving if observing the corresponding regulations of the lay��out of the gas installation (mandatory�� from 2007 onwards for operating liquid gas heaters while driving). Attention: Do not use in confined spaces (e.g. households)! Only�� to be installed by�� an authorised expert!

The gas pressure regulator Drive Safe (EN-GSW), 30 mbar, is available in the following output settings


52300-0� Regulator Drive Safe 0.8 kg/h, 8 mm 48.�3 55.3552300-02 Regulator Drive Safe 0.8 kg/h, �0 mm 48.�3 55.3552300-03 Regulator Drive Safe �.2 kg/h, �0 mm 48.�3 55.3552300-04 Regulator Drive Safe �.5 kg/h, �0 mm 48.�3 55.35

52300-05 Regulator Drive Safe �.5 kg/h, �0 mm for connection to the gas tank

48.�3 55.35

5�500-0� DuoComfort, automatic changeover valve for two-cy��linder sy��stems (only�� permitted in combination with gas pressure regulators Drive Safe (EN-GSW) or wall-mounted gas pressure regulators Ty��p EN 6�-DS made by�� GOK)

50.�6 57.68

G.8

G.�

G.2

G.7

G.�0

G.�2

HP-gas hose HRP High-pressure hoses with hose rupture protection must be used for the connection of the changeover valve or the Drive Safe regulator to the gas cy��linder.

Truma supplies different country��-specific versions and two lengths of the necessary�� high-pressure hoses, can be found in the corresponding packaging.

Length 450 mm for fix installation L.P.G. cylinders

504�0-0� HP-gas hose HRP, G.�2, DE 24.07 27.68504�0-02 HP-gas hose HRP, G.7, GB Propane 24.07 27.68504�0-03 HP-gas hose HRP, G.2, FR Shell 24.07 27.68504�0-04 HP-gas hose HRP, G.�, IT Liquid 24.07 27.68504�0-05 HP-gas hose HRP, G.�0, SE Pol 24.07 27.68504�0-06 HP-gas hose HRP, G.8, EU Shell 24.07 27.68

Length 750 mm for liquid gas cylinders on a pullout device

50420-0� HP-gas hose HRP, G.�2, DE 24.56 28.2450420-02 HP-gas hose HRP, G.7, GB Propane 24.56 28.2450420-03 HP-gas hose HRP, G.2, FR Shell 24.56 28.2450420-04 HP-gas hose HRP, G.�, IT Liquid 24.56 28.2450420-05 HP-gas hose HRP, G.�0, SE Pol 24.56 28.2450420-06 HP-gas hose HRP, G.8, EU Shell 24.56 28.24

Accessories see page ��.

��

En

erg

y sy

stem

s –

Gas

Su

pp

ly

Gas Supply for operation while stationary

The wall-mounted DuoControl changeover regulator sy��stem for the two-cy��linder sy��stem with integrated gas pressure regulator and test connection can only�� be used if heating is not required while driving (in vehicles as of 2007).

Note: can be used in older vehicles without restrictions!Also suitable for operation with one gas cy��linder.cy��linder.

Attention: The gas cy��linders must be closed while driving!Not for use in commercial vehicles! Do not use in confined spaces (e.g. households), and not for use in mobile homes in Germany��! Only�� to be installed by�� an authorised expert!


5�5�0-0� DuoControl 30 mbar, �.5 kg/h, �0 mm, incl. Z �0 / RVS 8 adapter, �0 mm journal on 8 mm olive screw joint

8��.30 102.69

5�5�0-03 DuoControl 50 mbar, �.5 kg/h, 8 mm, incl. Z 8 adapter on RVS �0, 8 mm journal on �0 mm olive screw joint

��7.27 111.86

Accessories for Drive Safe, DuoComfort and DuoControl

502�0-0� Remote indicator DuoC for DuoComfort and DuoControl with integrated EisEx de-icing sy��stem and 6 m wiring harness

53.06 61.02

34300-0� Extension cable 5 m for control panel (not illustrated)

3�.34 36.04

53�0�-0� EisEx, �2 V de-icing sy��stem for preventing the regulators from icing up in winter for Drive Safe, DuoComfort and DuoControl (on/off switch not included in scope of delivery��).

�5.37 17.68

50020-56000 ��0° elbow for installation between DuoComfort and Drive Safe, for example, or high-pressure hose, providing more flexible installation options in cases where space is limited

7.24 8.33

50020-6��00 Extension kit DuoComfort and DuoControl i.e. for use with gas cy��linders that are more than 100 cm apart (The scope of delivery�� does not include the required Ø �0 mm gas pipe)

�2.37 14.23

Remote gas switch

Gas remote switch, �2 V for single and two-cy��linder gas unit (c/w �.5 m connecting cable and control panel) with optimised flow rate up to 2 kg/h and straight pass, applicable for wall-mounted gas pressure regulators and Truma change - over units Duomatic, Triomatic, Duomatic Plus and DuoControl

570�3-0� Gas remote switch GS 8, mounting on gas pipe Ø 8 mm

6�.77 71.04

57023-0� Gas remote switch GS �0, mounting on gas pipe Ø 10 mm

6�.77 71.04

Attention: This gas remote switches may�� only�� be used, if it is ensured that all gas appliances are fitted with a safety�� pilot. This is for example the case with the actual Truma space and water heating sy��stems.

�2

En

erg

y sy

stem

s –

Gas

Su

pp

lyPart No. £ Ex. VAT £ Incl.

15 % VAT

53�00-0� De-icer „Eis-Ex“ �2 V antifrost for pressure regulator (not suitable for Drive Safe, DuoComfort or DuoControl)

�0.63 12.22

53��0-0� TEX transformer plug (�2 V, 4 Watts) for operation of the 'EisEx' with 230 V

25.72 29.58

5020�-0� Remote indicator, for the gas pressure regulator set Triomatic until date of manufacture 2003, �2 V to prevent malfunctions occuring in the gas sy��stem during winter operation, the remote indicator can be supplemented with one or two defrosters Eis-Ex (part no. 53�00-0�).

57.�2 65.69

Soundness control unit

The soundness control unit can be used in conjunction with the Truma test point to perform the air pressure test in accordance with EN ��4��. Also y��ou can utilise the additional test volume of 600 cubic cm to achieve the required test volume of at least 700 cubic cm.

026�� Soundness control unit, complete with additional 600 cubic cm volumiser, special adapter to connect the Truma test point and 750 mm connection hose

��3.��8 223.08

�3

En

erg

y sy

stem

s –

Gas

Su

pp

ly


3��0�0-28600 Gas pipe 8 x � mm (EN �0305-3) plastic-laminated

23.80 27.37

3��0�0-28500 Pipe clips EOS 8 with rubber lining and screw

�.5�� 1.83

3��030-�3200 Gas pipe 10 x � mm (EN �0305-3) plastic-laminated (bar with 3 metres length)

�7.40 20.01

3��030-�3400 Pipe clips EOS 10 with rubber lining and screw (�0/pack)

��.�0 21.96

�0�60-00 Straight union G 8 for gas pipe 8 mm �.5� 1.74

�0�6�-00 Straight union G 10 for gas pipe �0 mm 2.�8 2.51

50040-��00 Straight reducer union G 10 / 8 from �0 mm to 8 mm

2.8�� 3.32

50000-06500 Straight reducer union Z 8 / RVS 10, from 8 mm pipe stud to �0 mm screw fitting

3.4� 3.92

50020-04000 Straight reducer union Z 10 / RVS 8, from �0 mm pipe stud to 8 mm screw fitting

3.4� 3.92

�0�70-00 Elbow union W 8 for gas pipe 8 mm 4.�8 4.81

�0�7�-00 Elbow union W 10 for gas pipe �0 mm 4.52 5.20

50020-70500 Elbow reducer union W 10 / 8 5.2� 5.99

�0�70-02 Elbow union Z 8 / RVS 8, 8 mm pipe stud, 8 mm screw fitting

6.05 6.96

�0��0-00 Cross union KR 8 for gas pipe 8 mm ��.56 10.99

�06��0-00 Truma paste 400 (25 g tube) heat-proof sealing and sliding paste for screw-fitting

6.4�� 7.46

�4

En

erg

y sy

stem

s –

Gas

Su

pp

ly

UV �0

Changeover valve


25�40-0� Changeover valve UV 10 for Ø �0 mm gas pipe to combine the gas tank and the gas cy��linders together

4�.7�� 48.06

VK 3Valves and accessories24�33-0� Manifold valve VK 3-8,

inlet 8 mm with 3 outlets 8 mm 25.66 29.51

24�34-0� Manifold valve VK 3-10, inlet �0 mm with 3 outlets 8 mm

25.66 29.51

VK 4 24�53-0� Manifold valve VK 4-8, inlet 8 mm with 4 outlets 8 mm

40.87 47.00

24�54-0� Manifold valve VK 4-10, inlet �0 mm with 4 outlets 8 mm

52.34 60.19

Blanking plug for closing free outlets (not illustrated)

20000-��600 Blanking plug BS 8 mm 0.62 0.7120000-2�700 Blanking plug BS 10 mm 0.66 0.76

Connector for joining two manifolds to each other (not illustrated)

20000-46��00 Connector 8-8 mm 2.04 2.3520000-47000 Connector 10-10 mm 3.�6 3.6320000-47�00 Connector 10-8 mm 3.�6 3.63

K

23��0-0� Straight quick-acting valve K 8 Ms both ends 8 mm screw-fitting

�3.�4 15.11

232�0-0� Straight quick-acting valve K 10-8 Ms inlet 8 mm, outlet �0 mm screw-fitting

�3.55 15.58

23�30-0� Straight quick-acting valve K 10 Ms both ends �0 mm screw-fitting

20.04 23.05

20000-22��00 Bow strap �7 mm for fixing the quick-acting valves

�.�7 1.35

20000-22700 Spacer 2 mm for bow strap �7 mm 0.62 0.71

KV 82325�-0� Coupling quick-acting valve KV 8 42.�6 48.48

AKV 823270-0� Branch coupling quick-acting valve AKV 8 62.82 72.24

Note: All Truma valves are approved for liquid gas (but not for drinking water).

�5

En

erg

y sy

stem

s –

pow

er s

up

ply

BBQ Point

The BBQ Point permits the connection of an outdoor gas cooker, gas grill or a gas lamp. Additionally�� required is a gas hose, which is attached outside at the integrated coupling noozle, and a gas pipe Ø 8 mm.

Attention: The external gas socket is only�� suitable for extracting gas, not for feeding gas into the gas sy��stem.


232��0-02 BBQ Point ivory�� 33.24 38.23232��0-0� BBQ Point white 33.24 38.23

3��0�0-04500 Gas hose W 100 for coupling with coupling nozzle and Union nut R �/4” left

�3.54 15.57

�6

En

erg

y sy

stem

s –

pow

er s

up

ply

Power supplyPower inverter


400��0-8�000 TG �000 sinus power inverter for independent use of any�� 230 V device up to a maximum current consumption of �000 W (connecting cable not included).

608.86 700.19

Please order required cable sets

400��0-23�00 Electrical Kit to integrating the TG �000 sinus in the electrical on-board power supply�� of the vehicle

�57.70 181.35

600�0-54500 Cable protection Ø 25 mm, fixed length 2 m (not illustrated)

2.36 2.71

400��0-26200 Autarky�� Kit for independent use of all 230 V devices up to max. power consumption of �000 W

46.75 53.76

For more cable sets see page 4.

SPU

Transformer40000-47700 Transformer SPU, 230 /�2 V, for connecting

the Trumavent fan TEB-2 to a 230 V input 230 V, 50 Hz, 30 W output �2 V, �.5 A max.

44.��2 51.66

Accessories for electronic

30 cm

30 cm

Automatic shut-off equipment for connecting a window switch (complies with EN ��4��) for automatic equipment shut-off if the cowl is installed beneath or up to 30 cm beside an opening window (window switch not included).

3��050-00800 Trumatic E automatic shut-off equipment ��.87 22.8534000-80800 Trumatic C automatic shut-off equipment �5.6�� 18.0470020-00800 Ultrastore automatic shut-off equipment �0.6�� 12.29

34000-85800 Universal window switch for all of the most popular knockout windows in caravans. With the Trumatic E, the Trumatic C and the Ultrastore, only�� in combination with the shut-off device, with the Trumatic C 6002 EH and Combi (D) the shut-off device is already�� integrated in the unit.

22.82 26.24

�7

Hea

tin

g s

yste

ms

Trumatic S 2200 / S 2200 PL.P. Gas heaters only approved for caravans

Rated thermal output �850 W Gas consumption 50 – �70 g/h Weight 6.7 kg Product Ident. Number CE-0085AP0324

Alternatives A B C

Duct lengths up to 35 cm 75 cm �20 cm

Minimal cowl height 20 cm 33 cm 66 cm

A

C

B

all dimensions in mm


Left operating knob and right exhaust duct connection (without cowl kit)

3��0-02 Trumatic S 2200, 30 mbar, with automatic ignitor

274.2�� 315.43

3��30-02 Trumatic S 2200 P, 30 mbar, with piezo ignitor

25�.46 289.18

Right operating knob and left exhaust duct connection (without cowl kit)

3��0-0� Trumatic S 2200, 30 mbar, with automatic ignitor

274.2�� 315.43

3��30-0� Trumatic S 2200 P, 30 mbar, with piezo ignitor

25�.46 289.18

Cowl kits

30320-0� Wall cowl kit short, alternatives A + B (c/w � m exhaust duct AE 3, 0.5 m insulating duct ÜR and 2 cowl covers)

58.6�� 67.49

30320-02 Wall cowl kit long, alternative C (c/w �.5 m exhaust duct AE 3, 0.75 m insulating duct ÜR, � double duct support DSW and 2 cowl covers)

70.�5 80.67

30320-03 Roof cowl kit (c/w � roof cowl AK 3, 2.5 m exhaust duct AE 3, 2 m insulating duct, 3 clips ÜS and air intake fitting)

62.67 72.07

Cowl parts and cowl accessories see from page 2�.

RWS

EKM

Installation accessories

Rear panel with heat deflector for Trumatic S 2200 (for free standing installation)30��0-0� Rear panel RWSL

with exhaust connection right38.32 44.07

30��0-00 Rear panel RWS with exhaust connection left

38.32 44.07

30�7�-0� Installation box EKM for S 2200, exhaust connection right and left (for integrated fitting into a wardrobe)

83.36 95.86

DSW

30280-00 Double duct support DSW for side wall cowl ducts; necessary for duct lengths 75 and �20 cm (included in the wall cowl kit long)

4.33 4.98

The warm air ducting will be individually�� matched to the ty��pe of vehicle. All Trumavent fans (fitting direct to the installation box) or the Multivent fan can be used, see from page 32.

�8

En

erg

y sy

stem

s –

pow

er s

up

ply

Trumatic S 3002 / S 3002 P L.P. Gas heaters approved for caravans and motor caravans

Rated thermal output 3400 W Gas consumption 30 - 280 g/h Weight ��.8 kg Product Ident. Number CE-0085AP0325


Operation is only authorized with original Truma front case Important: Order front case seperately��!


3�3��-0� Trumatic S 3002, 30 mbar, with automatic ignitor, thermostat and installation box (without front case)

236.45 271.92

3�2��-0� Trumatic S 3002 P, 30 mbar, with piezo ignitor, thermostat and installation box (without front case)

2�8.47 251.24

30040-50�00 Front case sepia brown 55.63 63.9730040-50200 Front case agate grey�� 55.63 63.97

Roof cowl kit and installation accessories, see page ��.

��

Hea

tin

g s

yste

ms

Roof cowl kit


30330-00 Roof cowl kit c/w � roof cowl AK 3, Ø 60 mm, 2.5 m exhaust duct, 2 m insulating duct and 3 clips

50.87 58.50

30700-03 Flow top T3, necessary to operate the heater while driving

5.50 6.33

Cowl parts, cowl tops for the motor home and cowl accessories for the Caravan, see page 2�.


30030-85500 Gas line interior connection for Trumatic S 3002 right fitting

4.03 4.63

30030-85600 Gas line interior connection for Trumatic S 3002 left fitting

4.03 4.63

30030-04800 Air intake extension c/w 50 cm cowl duct (for difficult fitting situations, for example installation on a plinth, or for vehicles with double-floor)

2��.65 34.01

The warm air ducting will be individually�� matched to the ty��pe of vehicle. All Trumavent fans can be used (fitting direct to the installation box), with the comfort kit a fitting of the fan to the wall or the floor is also possible, see from page 32.

20

Hea

tin

g s

yste

ms

Trumatic S 5002 / S 5002 E L.P. Gas heaters, only approved for caravans

Rated thermal output 5500 W (propane / butane) 4600 W (natural gas) Gas consumption 60 – 480 g/h (propane / butane) 64.5 – 5�7 l/h (natural gas) Weight �7.5 kg Product Ident. Number CE-0085AP0326

For motor vehicles Truma offers the heaters Trumatic S 3002 (P) (see page �8) Trumatic E (see page 24) Combi (E) (see page 28) and Combi D (see page 30). Assembly�� dimension

Ass

embl

y�� di

men

sion


Operation is only authorized with original Truma front case Important: Order front case seperately��!


Trumatic S 5002, 30 mbar, with automatic ignitor, thermostat and installation box (without front case)

3�5��-0� Trumatic S 5002, 30 mbar 422.��7 486.42

3�5��-03 Trumatic S 5002, 30 mbar, with special installation box for 2 fans

443.70 510.25

30050-60�00 Front case sepia brown 8�.66 93.9130050-60200 Front case agate grey�� 8�.66 93.91

Front case flame effect

30050-6�000 Front case flame effect black-brown with acoustics

325.23 374.01

30050-6�200 Front case flame effect grey��-alu with acoustics

325.23 374.01

The front case flame effect can be retrofitted on heaters Trumatic S 5002, 30 mbar, from year of manufacture 06/2004. The inner installation box must also be replaced when retrofitting to the Trumatic S 5002, 30 mbar heaters from y��ear of manufacture 05/��8 to 05/2004. (Installation box for one fan, part no. 30050-5��00, special installation box for 2 fans, part no. 30050-5�300)

2�

Hea

tin

g s

yste

ms

Roof cowl kit


30350-00 Roof cowl kit (c/w � roof cowl AKL 5 Ø 70 mm, 2.5 m exhaust duct, 2 m insulating duct and 3 clips)

63.28 72.77

Cowl parts and cowl accessories for the caravan, see until page 23.


30050-30500 Gas line interior connection for Trumatic S 5002 (right and left fitting)

4.03 4.63

30030-04800 Air intake extension c/w 50 cm cowl duct (for difficult fitting situations, for example installation on a plinth, or for vehicles with double-floor) 2 extensions necessary!

2��.66 34.11

For warm air distribution all Trumavent fans can be used (fitting direct to the installation box). With the comfort kit a fitting of the fan to the wall or the floor is also possible, see page 32.

Accessories for cowl ducting Trumatic S

SKD

SKV AKV

306�0-00 Cowl extension SKD, 45 cm with cowl roof KD for caravans with special mountings or places with extreme wind conditions

�2.57 14.46

306��0-00 Cowl extension SKV, 45 cm 8.87 10.20

300�0-20800 Cowl extension AKV, �5 cm 2.��7 3.42

UEK

30630-04 Cowl leadthrough UEK for caravan protection double-roofs

�8.�2 20.84

T3

T2

T�

30700-03 Cowl top T3 for motor homes necessary�� to operate the heating while driving (not suitable for the heater Truma S 55 T)

5.50 6.33

30700-02 Cowl top T2 to operate the heating while driving (not suitable for the heater Truma S 55 T)

3.7� 4.27

30700-0� Cowl top T1 to operate the heating while driving (not suitable for the heater Truma S 55 T)

8.62 9.91

22

Hea

tin

g s

yste

ms

AK 3 AKL / AKL 5


30630-0� Roof cowl AK 3, Ø 60 mm for the heaters Trumatic 2200 and S 3002 (P)

�0.3�� 11.95

30630-03 Roof cowl AKL, Ø 60 mm, special version for a roof thickness over 5 cm up to �2 cm, for the heater Trumatic S 2200 and S 3002 (P)

�5.20 17.48

3065�-0� Roof cowl AKL 5, Ø 70 mm, for the heater Trumatic S 5002, for a roof thickness up to �2 cm

�4.02 16.12

KSW

AKW

30260-00 Wall cowl kit AKW for Trumatic S 2200 (without covers and ducts),

2��.33 33.73

30270-00 Cowl cover set KSW (2 pieces) for wall cowl AKW

�5.23 17.51

AKD302��0-00 Roof cowl kit AKD

for the heater Trumatic S 2200(roof cowl AK 3 + air intake duct cpl. without ducts),

22.�8 25.51

AE 3ÜR ÜS

30�40-00 Exhaust duct AE 3, Ø 55 mm (per metre) for the heaters Trumatic S 2200 (P) and S 3002 (P)

��.80 13.57

40230-00 Insulating duct ÜR, Ø 65 mm (per metre) for the heaters Trumatic S 2200 (P) and S 3002 (P)

4.78 5.50

4024�-0� Clip ÜS agate grey��, Ø 65 mm to attach the insulating duct ÜR to the wall

0.52 0.60

AE 5ÜR 5

ÜS 5

30�60-00 Exhaust duct AE 5, Ø 65 mm (per metre) for the heaters Trumatic S 5002 and Truma S 55 T

�3.��3 16.02

40250-00 Insulating duct ÜR 5, Ø 75 mm (per metre) for the heaters Trumatic S 5002 and Truma S 55 T

6.26 7.20

4026�-0� Clip ÜS 5 agate grey��, Ø 75 mm to attach the insulating duct ÜR 5 to the wall

0.63 0.72

AST30620-00 Exhaust duct support AST

ensures a continual rise of the exhaust duct in difficult fitting situations.

4.�� 4.73

23

Hea

tin

g s

yste

ms

Accessories for heaters Trumatic SPart No. £ Ex. VAT £ Incl.

15 % VAT

30040-65400 Ignition pilot light for retrofit in the heater front case. Suitable for the heaters Trumatic S 3002 and S 5002, after date of manufacture 08/99 or with new auto ignitor (with � battery��)

�0.35 11.90

30040-65700 Auto ignition kit for Trumatic S 3002 P, after date of manufacture 07/81 complete with remote ignition pilot light (not illustrated)

57.24 65.83

30050-33600 Installation panel set for the installation of a heater Trumatic S 5002 after date of manufacture 05/98 in the existing cut-out of a heater Trumatic S 5002 before 05/98

�6.72 19.23

Modern front case design for older Truma heaters Retrofit case for heaters Trumatic S 3002 (P) y��ear of manufacture 07/8� to 04/��6 c/w control rod and if neccessary�� piezo ignitor. Important: Not to be used with the heater Trumatic S 3002 K!

Front cases for Trumatic S 3002 30040-��00 Front case sepia brown 72.08 82.8930040-��300 Front case agate grey�� 72.08 82.89

Front cases for Trumatic S 3002 P (including piezo ignitor) 30040-��200 Front case sepia brown 76.88 88.4130040-��400 Front case agate grey�� 76.88 88.41

Additional electric heater Ultraheat

Power consumption at power setting 500 W 2.2 A �000 W 4.5 A 2000 W 8.5 A Power supply 230 V~, 50 Hz Weight 2 kg

Additional electric heater with thermostat, control panel and 3 m connection cable. Suitable for the heaters Trumatic S 3002 (P) after date of manufacture 07/8� and Trumatic S 5002 after 04/��8 (with new semi-circular front design) and Truma S 55 T.Installation between the heat exchanger and installation box. Not to be used for Trumatic S 3002 K, S 5002 K, and S 5002 until 04/��8 with old rectangular front design.

30402-02 Additional electric heater Ultraheat (not suitable for use with the heater Truma S 55 T)

�53.44 176.46

34300-0� Extension cable 5 m for the control panel (not illustrated)

3�.34 36.04

Accessories for the control panel see page 42.

FFC 2

3420�-0� Roomtemperature sensor FFC 2 c/w 4 m connecting cable monitors the room temperature regardless of the position of the control panel

28.22 32.45

30030-7�000 FYI sensor for Ultraheat (not illustrated)

22.�5 25.47

24

Hea

tin

g s

yste

ms

Trumatic E 2400 L.P. Gas heater

Rated thermal output (propane / butane) 2400 WAir flow rate 4�� / 78 m³/h Gas consumption (propane / butane) Partial load �00 g/h Full load 200 g/h Current input (�2 V) 0.6 / �.� A Rest current 0.0� A Weight (without / with peripheral devices) 4.8 / 5.� kg Product Ident. Number CE0085AO0008

110 2

48

37012324


Heater with thermostat, control panel, 4 m cable and mounting kit, without cowl kit. Versions with a �0 m control panel cable, 24 V or with a special control panel for installation in existing cut-outs on request.


37��-0� Trumatic E 2400, 30 mbar, �2 V 6��.58 712.52


Electric accessories see page 27.Electrical accessory�� if the cowl is installed beneath or next to a window, see page �6.

EW 24

Cowl kits and single cowl parts

Wall cowl kit EW 24 (without cowl cover), c/w � m exhaust duct,� m combustion air supply�� duct and clips3��37�-0� Wall cowl kit EW 24 cream 47.7� 54.873��37�-04 Wall cowl kit EW 24 bianco 47.7� 54.873��37�-03 Wall cowl kit EW 24 black 47.7� 54.87

Wall cowl kit EAW 24 (without cowl cover), for external fitted heaters c/w 0.5 m exhaust duct, � m combustion air supply�� duct, clips and air duct leadthrough

3��37�-02 Wall cowl kit EAW 24 cream �4�.08 162.243��37�-05 Wall cowl kit EAW 24 bianco �4�.08 162.243��37�-06 Wall cowl kit EAW 24 black �4�.08 162.24

KKW

Cowl cover KKW for wall cowl until 03/20013��40-00 Cowl cover KKW cream 6.84 7.873��40-02 Cowl cover KKW bianco 7.03 8.083��40-0� Cowl cover KKW black 7.03 8.08

KKW-2

Cowl cover KKW-2 for wall cowl from 03/20013��4�-00 Cowl cover KKW-2 cream 6.84 7.873��4�-02 Cowl cover KKW-2 bianco 6.84 7.873��4�-0� Cowl cover KKW-2 black 6.84 7.87

BK 243��06�-00 Floor cowl BK 24 long �7.22 19.80

3��06�-0� Floor cowl BK 24 short only�� for vehicles with a floor thickness up to 10 mm!

�7.22 19.80

Further single cowl parts see page 25.

25

Hea

tin

g s

yste

ms

WK 24

ÜSZR 24

AA 24

Single cowl parts E 2400


Wall cowl WK 24 (without ducts)3��38�-0� Wall cowl WK 24 cream 2�.85 25.133��38�-06 Wall cowl WK 24 bianco 2�.85 25.133��38�-03 Wall cowl WK 24 black 2�.85 25.13

3��420-00 Exhaust duct AA 24, Ø 33 mm (per metre) ��.04 10.40

3��440-00 Combustion air supply�� duct ZR 24, Ø 64 mm (per metre)

�0.35 11.90

4024�-0� Clip ÜS agate grey��, Ø 65 mm 0.52 0.60

VR 80

ZRS

Air ducting parts

3��450-00 Air duct VR 80 (per metre) outer Ø 80 mm, inner Ø 76 mm

�0.33 11.88

3��5��0-00 Clip ZRS, Ø 80 mm �.05 1.21

BG 80

3��4��0-00 Elbow BG 80, for air duct Ø 80 mm

8.72 10.03

Y 80

3��6�0-00 Y-pipe 80 inlet Ø 80 mm, outlet 2 x Ø 65/72 mm

�3.42 15.43

T 803��540-00 T-pipe 80

inlet Ø 80 mm, outlet 2 x Ø 65/72 mm�3.42 15.43

LR 80

3��500-0� Air diffuser LR 80 inlet Ø 80 mm,outlet � x Ø 65/72 mm and � x Ø 4�� mm

�3.38 15.39

VR 80Ø 80 mm

Ø 73

LF �8

�2

3

4

2

Air leadthrough for external fitted heater E 4000 A3��080-�6��00 Air duct LF 18, Ø 76 mm for external

fitting (standard length 60 cm)4�.4�� 47.71

3��0�0-6�800 Worm drive hose clamp 70 - ��0 (�) 7.55 8.68

3��050-73400 Connector-piece (2)for air ducts Ø 76 mm

3.80 4.37

3��080-�5��00 Protection grill (3) 2.03 2.33

3��050-74000 Fastening strap (4) 3.��8 4.58

The warm air ducting is individually�� matched to the ty��pe of vehicle, see from page 33.

26

Hea

tin

g s

yste

ms

Trumatic E 4000 / E 4000 A L.P. Gas heaters

Rated thermal output 3700 W Air flow rate approx. 70 / �02 m³/h Gas consumption Partial load �50 g/h Full load 3�0 g/h Current input (�2 V) �.0 / 2.3 A Rest current 0.0� A Weight (without / with E 4000 (E 4000 A) peripheral devices) 8.6 (��.0) / 8.�� (��.3) kg Product Ident. Number CE-0085AP0232


Heater c/w thermostat, control panel with 4 m cable and mounting kit, without cowl kit. Versions with a �0 m control panel cable, 24 V or with a special control panel for installation in existing cut-outs on request.


323��-0� Trumatic E 4000, 30 mbar, �2 V �,03�.��6 1,186.75

324��-0� Trumatic E 4000 A, 30 mbar, �2 V for external fitting

�,�3��.4�� 1,310.41

Accessories for the control panel see page 42.Electrical accessory�� if the cowl is installed beneath or next to a window, see page �6.

CWWKC

AA 3

ZRS

ZR

KW-2

AB

�7�

KMD

AA 3ZR

ZRS

ED

KWA

AD

Cowl kits and single cowl parts

Wall cowl kit CW with � m exhaust duct, � m combustion air supply�� duct and clips (without cover)

34��0-0� Wall cowl kit CW bianco 42.23 48.5634��0-02 Wall cowl kit CW cream 42.23 48.5634��0-0�� Wall cowl kit CW black 42.23 48.5634��0-�0 Wall cowl kit CW anthracite 42.23 48.56

3��6��0-00 Roof cowl kit ED c/w 2 m exhaust duct, 2 m combustion air supply�� duct, condensation trap and clips

�02.67 118.07

3��5�0-00 Floor cowl AB �7.57 20.21

Wall cowl WKC (without cover and ducts)340��-0� Wall cowl WKC cream 20.��3 24.07340��-05 Wall cowl WKC bianco 20.��3 24.07340��-0�� Wall cowl WKC black 20.��3 24.07340��-�0 Wall cowl WKC anthracite 2�.0� 24.16

3��600-0� Roof cowl AD, c/w cover (without ducts) 36.��8 42.53

3��620-0� Roof cowl cover KMD (spare) �4.7�� 17.01

3��670-00 Condensation trap KWA 23.47 26.99


3��580-00 Combustion air supply�� duct ZR, Ø 80 mm (per metre)

�0.33 11.88

3��5��0-00 Clip ZRS, Ø 80 mm �.05 1.21

3��330-0� Wall cowl cover KW-2 cream (replacement for heaters until 03/2005)

6.84 7.87

27

Hea

tin

g s

yste

ms

VR

ÜS 5

Air ducting parts


3��550-00 Air duct VR, Ø 72 mm (per metre) for direct connection to the heater Trumatic E 4000

��.43 10.84

4026�-0� Clip ÜS 5 agate grey��, Ø 72 mm 0.63 0.72

ZRS

I 80

3��570-00 Insulating duct I 80, Ø 85 mm, for air duct VR Ø 72, e.g. contact protection for Trumatic E 4000

�2.68 14.58

3��5��0-00 Clip ZRS, Ø 80 mm �.05 1.21

Duct VR 72Ø 72 mm

Duct LF

LVE

LFS

�

Air leadthrough for external fitted heater E 4000 A

3��760-00 Air duct LF, Ø �06 mm (per metre) 44.22 50.85

3��770-00 Clip LFS, Ø �06 mm 2.53 2.91

3��0�0-76��00 Connector piece Ø �06 mm (�) 3.88 4.46

3��750-00 Air diffuser LVE (outlet for 2 x air duct VR Ø 72 mm) c/w protection grill and protective panel

��.�6 22.03

The warm air ducting will be individually�� matched to the ty��pe of vehicle, see from page 33.

Accessories for electronics Trumatic E

ZUE 2

FF 2

FF FF �

3��8��-00 Time switch ZUE 2, �2 V / 24 V c/w cover frame and 4 metres cable

�38.5� 159.29

3��0�0-78300 Extension cable 4 m, for time switch ZUE 2 (not illustrated)

27.06 31.12

Remote sensor c/w cable to control the room temperature independantly�� from the position of the control panel3��0�0-77300 Remote sensor FF, with 4 m cable �4.8� 17.033��0�0-77400 Remote sensor FF 1, with 10 m cable 22.48 25.85

3��050-4�700 Remote sensor FF 2, to control the room temperature independantly�� from the position of the control panel (not suitable for the installation inside loading compartments). Please order also the cable.

��.04 10.40

34000-7��00 Cable 4 m for remote sensor FF 2 (not illustrated)

�5.��6 18.35

Extension cable for remote sensor FF 2 (not illustrated)3��0�0-78300 Extension cable 4 m 27.06 31.123��0�0-78400 Extension cable 10 m 45.74 52.60

MSD3��0�0-78200 Multiple plug adaptor MSD with 0.3 m

connection cable (for connecting different accessories, e.g. time switch and remote sensor)

33.�7 38.15

Special control panel for installation in existing cut-outs (e.g. instrument panel) with thermostat, cable and installation frame

3��050-3��000 Special control panel with 4 m cable 8�.28 93.473��050-38��00 Special control panel with 10 m cable �27.2�� 146.38

28

Hea

tin

g s

yste

ms

Combi 4 (E), Combi 6 (E) L.P. Gas and Electric heater with water boiler

Heating the water up time from approx. 15 °C to approx. 60 °C approx. 20 Min. (boiler) approx. 80 Min. (heater + boiler) Air flow rate max. 287 m³/h Current input (�2 V) (heater + boiler) Combi 4 Ø 1.1 A (0.2 - 5.6 A) Combi 6 Ø 1.3 A (0.2 - 5.6 A) (heating up boiler) 0.4 A Rest current 0.00� A Water capacity �0 litres Water pressure max. 2.8 bar Weight (without water) (without / with peripherals) Combi �4.0 / �4.5 kg Combi E �5.� / �5.6 kgProduct Ident. Number CE-0085BS0085

500*350*

540*

* Minimum installation dimensions in mm (please ensure that adequate room for installation and service is provided)

Combi 4 Combi 6

Burner stage � 2 � 2 3

Rated therm. output 2000 W 4000 W 2000 W 4000 W 6000 W

Gas consumption �60 g/h 320 g/h �60 g/h 320 g/h 480 g/h

Combi Combi E Heater (excluding exhaust duct) with thermostat, control panel with 3 m connecting cable, mounting parts, currentless FrostControl safety��-/drain valve and elbow fittings for �0 mm diameter water hoses. Models with water connections for semi-rigid piping (John Guest Sy��stem) on request.


33700-0� Combi 4, 30 mbar, �2 V �,��0.�6 1,276.68

337�0-0� Combi 4 E, 30 mbar, �2 V with electrical heating 230 V, 450 W

�,3��6.04 1,605.45

33800-0� Combi 6, 30 mbar, �2 V �,273.30 1,464.30

338�0-0� Combi 6 E, 30 mbar, �2 V with electrical heating 230 V, 450 W

�,564.63 1,799.32

Accessories for the control panel see page 42.Cowl kits and single cowl parts see page 2��.The warm air ducting will be individually�� matched, see from page 33. Electrical accessory�� if the cowl is installed beneath or next to a window, see page �6.

Accessories

Extension cable for control panel Combi and Combi E

3430�-0� Extension cable 6 m ��.42 13.133430�-02 Extension cable 3 m 6.55 7.53

ZUCB34043-0� Time switch ZUCB, c/w 3 m cable �42.56 163.94

3430�-03 Extension cable 6 m for time switch ZUCB (not illustrated)

�2.0� 13.81

70070-0� FrostControl heating element with �.5 m cable, for faster boiler filling, independently�� of the room temperature

�5.46 17.78

BGC340��-0� Elbow BGC

for direct connection to the warm air outlet of the heater Combi (E) (outlet for air ducts Ø 65 or 72 mm)

7.38 8.49

VD-Combi343�0-0� Blanking plug VD-Combi

for closing a warm air outlet at the heater Combi 4 (E)

�.44 1.66

2��

Hea

tin

g s

yste

ms

Cowl kits and single cowl parts Combi an Truamtic C (EH)

WKCAA 3

ZRS

ZR 80

CWPart No. £ Ex. VAT £ Incl.

15 % VAT

Wall cowl kit CW with � m exhaust duct, � m combustion air supply�� duct and clips (without cover)34��0-0� Wall cowl kit CW cream 42.23 48.5634��0-02 Wall cowl kit CW bianco 42.23 48.5634��0-0�� Wall cowl kit CW black 42.23 48.5634��0-�0 Wall cowl kit CW anthracite 42.23 48.56

Wall cowl WKC (without cover and ducts)340��-0� Wall cowl WKC cream 20.��3 24.07340��-05 Wall cowl WKC bianco 20.��3 24.07340��-0�� Wall cowl WKC black 20.��3 24.07340��-�0 Wall cowl WKC anthracite 2�.00 24.15

AA 3

ZR 80

ZRS

CD-CombiCD

DKC 2 34�22-0� Roof cowl kit CD with 3 m exhaust duct, 3 m combustion air supply�� duct and clips (without cover)

78.74 90.55

3405�-0� Roof cowl DKC 2 (without cover and ducts)

27.�7 31.25


3��580-00 Combustion air supply�� duct ZR, Ø 80 mm (per metre)

�0.3� 11.86

3��5��0-00 Clip ZRS, Ø 80 mm �.05 1.21

KVCSDDF

34070-0� Cowl extension KVC 30 cm 47.62 54.76

34080-0� Cowl leadthrough SDDF for caravan protection double-roofs

7.�� 9.19

Accessories Trumatic C (EH)

ZUC 2

34�4�-0� Heating collar retrofit kit 230 V, for warm water with control panel in the new design (only�� for Trumatic C series 2)

20�.2� 231.39

34300-0� Extension cable 5 m for control panel (not illustrated)

3�.34 36.04

340�0-02�00 Extension cable 5 m for power selector switch C EH (not illustrated)

3�.34 36.04

34042-0� Time switch ZUC 2, c/w 3 m cable and cover frame

�50.2� 172.74

34000-37000 Extension cable 5 m for time switch ZUC 2 (not illustrated)

25.52 29.35

34�70-0� Remote control for the electrical safety��-/drain valve from 06/��7, c/w 3 m connecting cable

3��.56 45.49

34000-86000 Cable extension 5 m for remote control (not illustrated)

�6.�� 19.54

BGC

VD

340��0-00 Elbow BGC for direct connection to the warm air outlet of the heater Trumatic C (outlet for air ducts Ø 65 or 72 mm)

7.7�� 8.96

40353-0� Blanking plug VD agate grey�� for closing a warm air outlet at the heater Trumatic C 4002 or C 3402

0.��8 1.13

34000-8�800 U-clamp set, required when using warm air duct VR, Ø 72 mm (not illustrated)

2.62 3.01

30

Hea

tin

g s

yste

ms

Combi D 6 Diesel heater with water boiler

540*500*350*

* Minimum installation dimensions in mm (please ensure that adequate room for installation and service is provided)

Heating the water up time from approx. 15 °C to approx. 60 °C approx. 20 Min. (boiler) approx. 80 Min. (heater + boiler) Air flow rate 287 m³/h Current input (�2 V) (heater + boiler) �.8 – 7 A (during normal operation)(heating up boiler) max. �.8 ARest current 0.00� A Fuel Diesel in acc. with EN 5��0Water capacity �0 litres Water pressure max. 2.8 bar Weight (without water) (without / with peripherals) �5.8 / �7.2 kg

normal operation

Burner stage � 2 3

Rated therm. output �000 W 2000 W 4000 W 6000 W

Fuel consumption ��0 ml/h 220 ml/h 452 ml/h 630 ml/h* during normal operation with moderate heat output of �000 W.

Heater (without wall cowl and pipe set for exhaust ducting) complete with room ther-mostat, control panel with 3 m cable, fixings, FrostControl currentless safety��-/drain valve, elbow fittings for �0 mm diameter water hoses, fuel routing including metering pump and universal tank removal set. Version with water connections for a fixed pipe lay��ing (John Guest sy��stem) on request.


33500-0� Combi D 6, �2 V �,670.28 1,920.82

Accessories for the control panel see page 42.Wall cowls and pipe sets see page 3�.The warm air ducting will be individually�� matched, see from page 33.Electrical accessory�� if the cowl is installed beneath or next to a window, see page �6.

Wall cowls and pipe sets

WKCD

Wall cowl WKCD complete with extraction fan and connec-ting cable (without sound mufflers and exhaust ducts)

34400-02 Wall cowl WKCD bianco �54.5�� 177.7834400-03 Wall cowl WKCD black �54.5�� 177.7834400-04 Wall cowl WKCD anthracite �54.5�� 177.7834400-05 Wall cowl WKCD white �54.5�� 177.78

CDW

Pipe set CDW complete with sound mufflers for combustion air and exhaust, incl. lock washer and insulating duct

34500-0� Pipe set CDW 54 cm �00.22 115.2534500-02 Pipe set CDW 70 cm �08.00 124.2034500-03 Pipe set CDW �00 cm �23.52 142.0534500-04 Pipe set CDW �50 cm �54.5�� 177.78

3�

Hea

tin

g s

yste

ms

Accessories Combi DPart No. £ Ex. VAT £ Incl.

15 % VAT

Extension cable for control panel Combi D3430�-0� Extension cable 6 m ��.42 13.133430�-02 Extension cable 3 m 6.55 7.53

ZUCB34043-0� Time switch ZUCB, c/w 3 m cable �42.56 163.94

3430�-03 Extension cable 6 m for time switch ZUCB (not illustrated)

�2.0� 13.81

70070-0� FrostControl heating element with �.5 m cable, for faster boiler filling, independently�� of the room temperature

�5.46 17.78

BGC340��-0� Elbow BGC

for direct connection to the warm air outlet (outlet for air ducts Ø 65 or 72 mm)

7.38 8.49

346�0-0� Altitude kit for longer heater operationat elevations of �500 to 2750 m(not illustrated)

455.45 523.77

Special tools (prices net - also for specialist shops)

34020-44700 Filling unitfor rapid fuel line filling

232.2�� 267.13

34020-45000 Lock washer tool for installing the lock washer if the pipe set requires shortening.

45.83 52.70

34020-45300 Hose cutterfor cutting off the fuel hose or the fuel line

�2.36 14.21

32

Air

tec

hn

olo

gy

Trumavent fans for the heater Trumatic S (not for Truma S 55 T)

Connection for air ducts ÜR Ø 65 mmor VR Ø 72 mm

TEB-2 (12 V) TN-2 (230 V) Current input 0.3 - � A (4 - �3 W) 0.5 A (65 W) Air flow with air duct ÜR Ø 65 mm �35 m³/h �6�� m³/h VR Ø 72 mm �42 m³/h �82 m³/h Part No. £ Ex. VAT £ Incl.

15 % VAT

4��22-0� Trumavent fan TEB-2, 12 V with automatic speed control and control panel to fit in front case, only�� for Trumatic S 3002 and S 5002 with new design)

�27.07 146.13

4��22-02 Trumavent fan TEB-2, 12 V as above with external control panel

�23.76 142.32

4�232-0� Trumavent fan TEN-2, 12 V fan with automatic speed control, control panel to fit in front case and Transformer 230 /�2 V, only�� for Trumatic S 3002 and S 5002 with new design)

�68.38 193.64

4�232-02 Trumavent fan TEN-2, as above with external control panel

�65.25 190.04

4�222-0� Trumavent fan TN-2, 230 V with external control panel

��.02 113.87

Accessories for external control panels see page 40.

SPU40000-47700 Transformer SPU, 230 /�2 V, for

connecting the Trumavent fan TEB-2 to a 230 V input 230 V, 50 Hz, 30 W output �2 V, �.5 A max.

44.��2 51.66

Multivent-Fan TBM

Connection forair duct ÜR Ø 65 mm

For warm air distribution of the heater Trumatic S 2200, as an additional fan for increasing the air output in particularly�� long warm air duct sy��stems or as an extractor fan in the kitchen or bathroom (in conjunction with an intake nozzle DM).

Dimensions (mm) L �50 x W �30 x H �24 Air flow rate partial load 2�� m³/h full load 60 m³/h Current input partial load 0.23 A full load 0.5 A

4��4�-0� Multivent fan TBM, 12 V universal fan 74.85 86.08


DM

Accessories

40670-00 Air intake nozzle DM for connecting the Multivent fan to the heater rear panel or installation box (suitable for air ducts ÜR Ø 65 mm)

4.33 4.98

AKR

30630-02 Roof cowl AKR for ventilation outlet (with rain protection)

�4.07 16.18

33

Air

tec

hn

olo

gy

Truma Comfort kit with Airmix

AXK-2Part No. £ Ex. VAT £ Incl.

15 % VAT

4062�-0� Comfort kit AXK-2, c/w Airmix, for Trumavent fans after 05/96 (not for motor homes or floor cowld heaters - not for Truma S 55 T)

50.02 57.52

40000-47��00 Control panel cable 1,3 m long, necessary for Trumavent fans TEB 2 from 05/96 with the control panel integrated in the front case of the heater (not illustrated)

�8.2�� 21.03

Warm air ducting accessories

ÜR

ÜS

40230-00 Air duct ÜR, Ø 65 mm (per metre) 4.78 5.50

4024�-0� Clip ÜS agate grey��, Ø 65 mm 0.5� 0.59

VR

ÜS 5

3��550-00 Air duct VR, Ø 72 mm (per metre) ��.44 10.86

4026�-0� Clip ÜS 5 agate grey��, Ø 72 mm 0.62 0.71

VR 80

ZRS

3��450-00 Air duct VR 80, Ø 80 mm (per metre) �0.33 11.88

3��5��0-00 Clip ZRS, Ø 80 mm �.05 1.21

ZRS

DRI

4068�-00 Insulated waterproof air duct DRI, Ø 75 mm, standard length 2 m

27.62 31.76

3��5��0-00 Clip ZRS, Ø 80 mm �.05 1.21

ZR �8ZRS �8

3��70-00 Air duct ZR 18, Ø 4�� mm �0.33 11.88

3��0-00 Clip ZRS 18, Ø 4�� mm �.05 1.21

AZRAZS

402�0-00 Air duct AZR, Ø 22 mm (per metre) 2.66 3.06

40220-00 Clip AZS, Ø 22 mm 0.34 0.39

34

Air

tec

hn

olo

gy

LT


40�5�-02 T-pipe LT agate grey�� for air ducts Ø 65 or 72 mm

�.88 2.16

EM

40�8�-0� Nut EM agate grey �.25 1.44

EN

End outlet EN with air throttle, fitting for flow-T LT, end outlet-nut EM, and tubes Ø 65 mm

40�7�-0� End outlet EN agate grey�� .86 2.1440�7�-02 End outlet EN beige �.86 2.1440�7�-03 End outlet EN brown �.86 2.1440�7�-04 End outlet EN grey�� .86 2.1440�7�-05 End outlet EN black �.86 2.1440�7�-06 End outlet EN white �.86 2.1440�7�-08 End outlet EN silver 3.�6 3.6340�7�-0�� End outlet EN olive brown 3.�6 3.63

EN-L

40�7�-25 End outlet EN-L black, for rounded furniture items and thicker walls up to a maximum of 43 mm.

2.33 2.68

EN-O

End outlet EN-O without air throttle, for lamella inset LA

40�7�-07 End outlet EN-O agate grey�� .�� 1.3740�7�-2�� End outlet EN-O olive brown �.�� 1.37

LA

Lamella inset LA, to attach onto ending outlet EN-O, direction of air flow is adjustable by�� turning

4072�-0� Lamella inset LA agate grey�� 0.��2 1.064072�-02 Lamella inset LA beige 0.��2 1.064072�-03 Lamella inset LA brown 0.��2 1.064072�-04 Lamella inset LA grey�� 0.��2 1.064072�-05 Lamella inset LA black 0.��2 1.06

BL 22

BL 30

40�0�-0� Panel BL 22 agate grey�� with air outlet Ø 22 mm, to strongly�� reduce the volume of the air flow

0.44 0.51

40�0�-02 Panel BL 30 agate grey�� with air outlet Ø 30 mm, to slightly�� reduce the volume of the air flow

0.44 0.51

SCW 2

Swivelling air outlet SCW 2 a non-closable air outlet for the heaters Trumatic E, Trumatic C and Combi (D) for air ducts Ø 80, 72 or 65 mm

3��7�-0� Swivelling air outlet SCW 2 black ��.66 13.413��7�-02 Swivelling air outlet SCW 2 beige ��.66 13.413��7�-03 Swivelling air outlet SCW 2 basalt grey�� .66 13.41

34020-24000 Clips, 3 pcs. for T-pipe LT, T-piece TS and Combi for better air pipe securing (not illustrated)

3.07 3.53

35

Air

tec

hn

olo

gy

TS


40�5�-0� T-pipe TS agate grey�� for air ducts Ø 65 or 72 mm

2.42 2.78

WL4070�-0� Wall outlet vent WL agate grey��

for air ducts Ø 65 or 72 mm3.�7 3.65

Y

40��-0� Y-pipe agate grey�� for air ducts Ø 65 or 72 mm

3.77 4.34

BG

3��0�0-76400 Elbow BG black for air ducts Ø 65 or 72 mm

8.�4 9.36

SP 2

Duct shut off to centrally�� close an air leadthrough for air ducts Ø 65 or 72 mm

40�2�-0� Cord operated duct shut off SP agate grey�� .67 11.12

40�2�-02 Remote controlled duct shut off SP 2 agate grey�� with a bowden cable and a control slide for fitting on a wardrobe

�6.�7 18.60

ÜM 40�6�-0� Straight coupling ÜM agate grey�� for air ducts Ø 65 or 72 mm

3.27 3.76

T-AT 40�3�-0� Branch-T AT agate grey��, e.g. for refrigerator ventilation in summer for air ducts Ø 65 or 72 mm, outlet Ø 22 mm

3.43 3.94

RD 403��-0� Pipe cover RD agate grey�� for air ducts Ø 65 or 72 mm

0.48 0.55

VD 40353-0� Blanking plug VD agate grey�� to close form parts

0.��8 1.13

RZ 3��0�0-8�300 Reducer RZ black from air ducts Ø 72 mm to Ø 4�� mm

4.22 4.85

RZ35 4038�-0� Reducer RZ35 agate grey�� for air ducts Ø 65 or 72 mm for isotherm duct Ø 35 mm

0.��2 1.06

DT 40660-00 Air intake nozzle DT Ø 80 mm (for fan connection in special cases)

4.48 5.15

36

Air

tec

hn

olo

gy

AB35 Truma Isotherm system


4030�-0� Branch AB35 agate grey�� for Isotherm sy��stem for air duct Ø 65, outlet Ø 35 mm

6.70 7.71

IR

40320-00 Isotherm duct IR Ø 35 mm, perforated (per metre)

5.84 6.72

40320-0� Isotherm duct IR Ø 35 mm, not perforated (per metre)

5.86 6.74

DS

40340-00 Double-clip DS for isotherm duct Ø 35 mm and air duct ÜR Ø 65 mm

�.�� 1.28

IS4033�-0� Clip IS agate grey��

for isotherm duct Ø 35 mm0.54 0.62

EC403��-0� Corner air outlet EC agate grey��

for isotherm duct Ø 35 mm2.43 2.79

Towel dryerWarm air from the existing Truma heater is routed into the two swivelling support tubes

Dimensions (cm) L 76 x W 4 x H 8 Weight 0.7 kg

40500-0� Towel dryer, titanium silver, incl. installation accessories

68.�8 78.41

Awning WarmerAwning Warmer in the new design to conduct the warm air from the heater of the caravan directly�� into the awning, made up of air outlet with cover, � m air duct Ø 65 mm, T-pipe TS and remote controlled duct shut off SP 2.

4037�-02 Awning Warmer ivory�� 43.60 50.144037�-0� Awning Warmer white 43.60 50.14

37

Wat

er c

om

fort

UltrastoreHeating time up from approx. 15 °C to approx. 70 °C for �0 l water Gas operation approx. 34 min. Electrical operation approx. 45 min. Gas and electrical approx. 25 min. for �4 l water Gas operation approx. 50 min. Electrical operation approx. 72 min. Gas and electrical approx. 38 min. Water hose connection Pressure-tight hot water hose Ø �0 mm Gas consumption �20 g/hCurrent consumption (�2 V) Ignition 0.�7 A Heating up 0.08 A Standby�� 0.04 A (230 V) 3.7 A Water pressure up to 2.8 bar Weight (without water) Ultrastore �0 l 6.7 kg Ultrastore �4 l 7.3 kg Product Ident. Number CE-0085AP0038 all dimensions in mm

Water heater in the new design with cowl cover KBS 3, control panel with 3 m connecting cable, wall cowl and safety��-/drain valve.


73400-2� Ultrastore �0 litres, �.2 kW gas / 850 Watt electrical water heater

468.68 538.98

73000-0� Ultrastore �0 litres, �.2 kW gas only�� water heater

46�.8� 531.08

734�0-2� Ultrastore �4 litres, �.2 kW gas / 850 Watt electrical water heater

5��6.3�� 685.85

730�0-0� Ultrastore �4 litres, �.2 kW gas only�� water heater

508.85 585.18

Accessories for the control panel see page 42.Accessories for the water sy��stem see page 3��.Electrical accessory�� if the cowl is installed beneath or next to a window, see page �6.

VBO 2

KBS 2

KBS 3


70000-53500 Cable extension 5 m for control panel (not illustrated)

2�.�0 24.27

70�3�-00 Cowl extension VBO 2, length 50 mm (for wall thickness over 35 mm necessary��)

2�.��0 25.18

70�2�-0� Cowl cover KBS 2 for Ultrastore series 2 and 3 from 0�/��2 until 06/2006

��.��4 11.43

700�0-�6000 Removel tool for cowl cover KBS 2 5.44 6.26

70�22-0� Cowl cover KBS 3 white for Ultrastore after 07/2006

��.��5 11.44

70020-0�500 Cascade Adapter Plate (not illustrated) �4.5� 16.69

In difficult fitting situations within motor vehicle and caravan, the Truma Boat Boiler with flexible exhaust ducting via the wall or through the roof can be used.

38

Wat

er c

om

fort

ElectroboilerHeating time up from approx. 15 °C to approx. 70 °C approx. 70 min. Water capacity �4 litres Water pressure up to 2.8 bar Water hose connection Pressure-tight hot water hose Ø �0 mm Current consumption (230 V) 3.7 A Weight (without water) 3 kg


Electroboiler with control panel, 3 m connecting cable, and safety��-/drain valve


7�200-0� Electroboiler for �4 litres with electrical heating element for warm water 230 V, 850 Watt (3.7 A)

320.��6 369.10

Accessories for the control panel see page 42.Accessories for the water sy��stem see page 3��.

Truma ThermeThe Truma Therme is warmed up by�� the electric heater element 230 V or the warm air distribution of the Heating Sy��stem.

Heating time From approx. �5 °C to approx. 60 °C approx. 50 min. Electric heater element 230 V ~ (300 Watt) Temperature 65 °C Dimensions (cm) L 37 x B 22 x H 23 Water capacity 5 litres Water pressure max �.2 bar Weight 2 kg (without water)

420�3-0� Therme TT-2, c/w remote control and drain valve and breather valve (without mixing valve)

�36.37 156.83

Accessories for the control panel see page 42.Accessories for the water sy��stem see page 3��.

3��

Wat

er c

om

fort

Water system accessories

SC


407�2-0� Hose clip SC agate grey�� for securing two flexible water hoses on the warm air duct (also suitable for �2 mm semi-rigid piping – John Guest Sy��stem)

0.57 0.66

70000-03300 Non return valve for flexible water hose Ø 10 mm (essential extra for immersion pumps)

3.�5 3.62

70020-03500 Non return valve with a connector Ø 12 mm for semi-rigid piping (John Guest Sy��stem)

6.36 7.31

ABO

Accessories for Ultrastore and Electroboiler

Safety��-/drain valve ABO in some fitting situations an additional valve will be necessary��

70�4�-02 Safety��-/drain valve ABO 2,8 bar for flexible water hose Ø 10 mm

20.05 23.06

70�42-05 Safety��-/drain valve ABO 2,8 bar with a connector Ø 12 mm for semi-rigid piping (John Guest Sy��stem – not illustrated)

23.03 26.48

Accessories for Therme

40020-00��00 Drain valve with double connection 2.76 3.17

40020-00300 Mixing valve for Truma Therme �0.72 12.33

ABO70�4�-�0 Safety��-/drain valve ABO 1,5 bar, for

flexible water hose necessary when connecting the Truma Therme to a central water supply�� (city�� mains)

20.05 23.06

40

Wat

er c

om

fort

Ultraflow Luxury water system

Truma Ultraflow, operates in the caravan water supply�� as a pressurized luxury�� water sy��stem and supplies water to all cold taps and to hot taps through the Ultrastore water heater.


The Filter housing c/w one filter.The water pump (not included) transports water from the external water container (aquaroll) through an active carbon filter to the caravan’s water supply��.

460�0-0� Filter housing white 37.62 43.26460�0-02 Filter housing ivory�� 37.62 43.26

The active carbon filter removes unpleasant tastes, smells and colouring to give clear, fresh tasting water.

46020-0� Replacement filter 8.35 9.60

The compact housing is the standard plug-in water sy��stem without filter or outdoor shower connection.

46030-0� Compact housing white �5.28 17.5746030-02 Compact housing ivory�� 5.28 17.57

The Water pump with ergonomically�� shaped pistol grip is plugged into the filter or compact housing.

46040-0� Water pump assembly��, tube length 800 mm

4�.02 47.17

The new Truma surge damper with integrated pressure switch ensures an even water flow. The integrated, electronically�� controlled pressure switch has an intelligent control sequence.

46050-0� Surge damper c/w 2 flexible hose adapter 7��.5�� 91.53

Important notice: In a pressurized water system, the use of a non-return valve is essential. The valve prevents, an excessive high pressure (caused by�� heating up) in the sy��stem and the back flow of hot water to the cold water taps.

40060-88000 Non-return valve (John-Guest-Sy��stem) 7.35 8.45

40060-��0000 Non-return valve (flexible tubing) 3.2� 3.69

4�

Wat

er c

om

fort

Accessories Part No. £ Ex. VAT £ Incl.

15 % VAT

The Ultraflow winter conversion kit enables the use of y��our water sy��stem under sub-zero conditions without the problem of the outside water container freezing and avoids the need for on-board tanks.46060-0� Winter kit white 2�.60 24.8446060-02 Winter kit ivory�� 2�.60 24.84

Ultraflow Compact housing with Outdoor Shower Set. For the use of a sy��stem a shower housing is fitted directly�� beside. The two housings are connected

46070-0� Compact shower set white 4��.7�� 57.2646070-02 Compact shower set ivory�� 4��.7�� 57.26

The pistol grip of the Outdoor Shower is simply�� plugged into the Filter Housing. After fitting the connector the Outdoor Shower is ready�� for use.

46080-0� Outdoor Shower Set for the Filter Housing c/w connector

38.24 43.98

The Truma Waterline is a �5 metre hose pipe to connect their Ultraflow water sy��stem directly�� to a mains water supply��.

460��0-0� Waterline c/w fittings and a special pressure reducing valve

62.34 71.69

Replacement for Crystal Water System

468�0-0� Replacement Filter Cartrige - single - for Cry��stal � + 2 Water Sy��stems

�4.02 16.12

40060-5��00 Filter removal tool (not illustrated) 5.�� 5.97

Ultraflow conversion kit filter housing c/w one filter, blind cover and pistol grip (not illustrated)460�0-03 Ultraflow conversion kit filter housing white 42.85 49.28460�0-04 Ultraflow conversion kit filter housing ivory�� 42.85 49.28

Ultraflow conversion kit compact housing c/w pistol grip (not illustrated)46030-03 Ultraflow conversion kit compact housing

white24.7�� 28.51

46030-04 Ultraflow conversion kit compact housing ivory��

24.7�� 28.51

46020-0� Ultraflow replacement filter Also suitable for the Cry��stal 2 (please note y��ou will be required to retain the clear screw cap from the cry��stal 2 filter).

8.35 9.60

46800-0� Cry��stal Inline 50 water filter 26.��3 30.97

40060-6��000 Adapter plate Cry��stal / Ultraflow 7.83 9.01

42Furt

her

pro

du

cts

Control panel accessoriesPart No. £ Ex. VAT £ Incl.

15 % VAT

40000-52600 Surface-mounting frame for control panels

2.40 2.76

Cover frames for control panels (standard)

34000-60600 Cover frame agate grey�� (standard) 0.30 0.3534000-67700 Cover frame black 0.85 0.9834000-70600 Cover frame beige 0.85 0.9834000-67��00 Cover frame platinum 2.�2 2.4434000-67800 Cover frame gold 2.�2 2.44

Adapter frame, to mount the Truma control panels in existing control housings

34000-63500 Adapter frame beige 3.25 3.74

Cover double frame for control panels (standard)34000-65300 Cover double frame agate grey�� (standard) �.4� 1.62

Large cover frame for time switches

34000-65200 Large cover frame agate grey�� (standard) �.4� 1.6234000-72800 Large cover frame black �.84 2.1234000-72600 Large cover frame platinum 3.26 3.7534000-72700 Large cover frame gold 3.26 3.75

34000-65��00 Line-up clip, to connect two cover frames 0.26 0.30

Side parts, provide a visually�� striking way�� to round off the cover frames (2 parts are necessary��)34000-6�200 Side part agate grey�� (standard) 0.44 0.5134000-6��400 Side part pearl-light-grey�� 0.44 0.5134000-6�400 Side part ultramarine blue 0.44 0.5134000-6��600 Side part ruby�� red 0.44 0.5134000-66800 Side part black 0.44 0.5134000-7�400 Side part beige 0.44 0.5134000-66300 Side part platinum �.08 1.2434000-67400 Side part gold �.08 1.24

Prices and VAT are subject to change.

Pro

duct

Cat

alog

ue C

ampi

ng T

rum

a U

K ·

08/2

00��

Sales telephone +44 (0) �283 586050Sales fax +44 (0) �283 58605�[email protected] telephone +44 (0) �283 586020Service fax +44 (0) �283 58602��[email protected]

Truma (UK) LimitedPark LaneDove Valley�� ParkSouth Derby��shire DE65 5BGwww.trumauk.com

Sdmc Truma

Documents

Transcript of Sdmc Truma