Schedule€-€A€€ EMD : Tender Date : 19.12.2019 Rs.4,12,000/- … · 2019-12-13 · 2.50 Kgs...

Clearing the Light jungle and De-Silting the Earthen Drain at SIPCOT Industrial Complex,

Pudukottai.

GST 12% on Sub Total

Strengthening and improvement of balance existing roads including new formation of service

road with construction of box culvert and providing earthern drain at SIC, Nilakottai.


Special repairs to roads, fencing for Bus terminal area and renovation of A.O.Block at SIPCOT

Industrial Complex, Manamadurai


IV

V


Section Amount (Rs.)Description of work

Clearing the light jungle and De-Silting the RCC drain at SIPCOT Industrial Park, Pillaipakkam


Clearing of Scrub jungles in Roads and Common Purpose area at SIPCOT Industrial Complex,

Phase-I - Hosur.


De-Silting of Storm Water Drain in Phase - II and Expansion - I & II at SIPCOT Industrial

Complex, Hosur.


III

I

II

VIIRepair works to kerb wall in all roads at DTA in SIPCOT Industrial Growth Centre, Perundurai.

VI

Schedule - "A"

NAME OF THE WORK: Improvement of roads and other works in SIPCOT Industrial Complex/ Growth Centre/ Parks at

Pillaipakkam, Hosur, Bargur, Cheyyar, Pudukottai, Nilakottai, Manamadurai, Perundurai and Oragadam.

EMD :

Rs.4,12,000/-

Tender Date : 19.12.2019

CONTRACTOR

No.of Corrections:.........

No. of Overwritings:.........

SE

GRAND TOTAL

VIII

Clearing the jungles along the roads on both sides, centre median and OSR area including

desilting of storm water drain, Spcial repairs of road work RNS parks & SEZ road and uplifting

works on all roads at SIPCOT Industrial Growth Centre, Oragadam.


IXDe-Silting of Storm Water Drain in Phase - I at SIPCOT Industrial Complex, Hosur.


XV Painting for Existing Compound Wall around A.O.Block at SIPCOT Industrial Complex, Cheyyar.

(Rupees__________________________________________________________________________________only)


XClearing of Scrub jungles in Roads and Common Purpose area at SIPCOT Industrial Complex,

Phase - II and Expansion - I & II - Hosur.


XI Clearing the Light jungles in DTA area at SIPCOT Industrial Complex, Bargur.


XIVJungle Clearance for OSR area at SIPCOT Industrial Complex, Cheyyar.


XII

Kerb Wall Painting, Line Marking and Providing Road Stud at SIPCOT Industrial Complex,

Cheyyar.


XIIIJungle Clearance and De-Silting the drains at SIPCOT Industrial Complex, Cheyyar.


CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.

Rate Both in figures

and in words (Rs.)

Unit Amount

(In Rupees)

1 213000.00

Sqm

(Two Lakhs

Thirteen

Thousand

square

metres only)

1 Sqm

(One

square

metre)

2 3900.00

Cum

(Three

Thousand

Nine

Hundred

cubic metres

only)

1 Cum

(One cubic

metre)

Section I - 2 items (Two items only) Sub Total

Clearing light jungles including the jungles with uprooting of

all vegetations and destroy by summary and cleaning away

from the site with all other incidental charges etc., complete

as per standard specification and as directed by SIPCOT

Officers.

Earth work excavation in all soils except hard rock requiring

blasting and conveying the excavated earth with a lead of 1

Km including initial lead of 10m and intial lift of 2 Km on

desilting of side drain both sides etc., Complete as per

standard specification and as directed by SIPCOT Officers.

Description of Work

I.Clearing the light jungle and De-Silting the RCC drain at SIPCOT Industrial Park, Pillaipakkam.

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 73250.00

Sqm

(Seventy

Three

Thousand

Two Hundred

and Fifty

square

metres only)

1 Sqm

(One

square

metre)

Section II - 1 item (One item only) Sub Total

Description of Work

II. Clearing of Scrub jungles in Roads and Common Purpose area at SIPCOT Industrial Complex, Phase-I - Hosur.

Clearing of Scrub Jungles and clearing away from the site and

well burntout the same with all other incidental charges etc

complete as per standard specification and directed by SIPCOT

Officers.

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 2100.00

Cum

(Two

Thousand

One Hundred

cubic metre

only)

1 Cum

(One cubic

metre)

Section III - 1 item (One item only) Sub Total

III. De-Silting of Storm Water Drain in Phase - II and Expansion - I & II at SIPCOT Industrial Complex, Hosur.

Description of Work

Earth work excavation and depositing on bank with a lead of 3

km including initial lead of 10m and lift of 2m in hard stiff clay

black cotton hard red earth, shales, murram, ordinary gravel,

stone earth and earth mixed with small size boulders for

foundation except hard rock requiring blasting etc., complete

with standard specification and as directed by SIPCOT

Officers.

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 53100.00

Sqm

(Fifty Three

Thousand

One Hundred

square

metres only)

1 Sqm

(One

square

metre)

2 24000.00

Sqm

(Twenty Four

Thousand

square

metres only)

1 Sqm

(One

square

metre)

3 3100.00

Cum

(Three

Thousand

and One

Hundred

cubic metres

only)

1 Cum

(One cubic

metre)

Section IV - 3 items (Three items only) Sub Total

IV. Clearing the Light jungle and De-Silting the Earthen Drain at SIPCOT Industrial Complex, Pudukottai.

Description of Work

Clearing the Light jungle (Julifora and others) in OSR area,

road side and other in the Complex area and taking in to out

side at site and destory/ burnout the same with all other

incidental charges etc., complete as per standard specification

and as directed by SIPCOT officers.

Removing the weeds in road berm sides in the Complex area

and taking in to out side at site by vechile and destory it etc.,

complete and as directed by SIPCOT officers.

Earth work excavation in all classes of soils such as sand silt,

other loose soil, wet sand or silt not under water, light black

cotton soil, Hard Stiff Clay, Stiff black cotton, hard earth,

shales, murram, gravel, stoney earth and earth mixed with

small size boulders including excavated earth except hard rock

requiring blasting as per SS 20B with intial lead of 10m and lift

of 2m and conveying the earth and deposting on the places

shown by the SIPCOT Officer including cost of labour, tools

and plants, all other incidental charges etc., complete and as

directed by SIPCOT officers.

CONTRACTOR



SE

1 8280.00

Sqm (Eight

thousand

and two

hundred and

eighty

square

metres only)

Clearing the light jungle with uprooting as per standard

specification and dispose them by burning and clearing the

site as per the direction of SIPCOT officials.

1 Sqm

(one

square

metre)

2 11000.00

Sqm (Elevan

thousand

square

metres only)

Picking the old surface of the low lying damaged road portion

to fill with GSB for raising the portion.

1 Sqm

(one

square

metre)

3 5200.00

Cum (Five

thousand

two hundred

Cubic metres

only)

Providing & laying Granular sub base (GSB) layer not

exceeding 100mm compacted thickness on the pr3pa43e sub

grade with approved minimum CBR value 30 grading

conforming to table 400-/1400-2 of MORT&H including

screening, spreading in uniform layer with grader, watering

and premising at optimum moisture content,compacting with

vibratory rollers of 80 to 100 KN static weight to not less than

98 % of the maximum laboratory dry density as per IS : 2720

Part8) and fine dressing to required grade and gorss slope as

shown on the drawing or as directed by the Engineer,

inlcuding obtaining and transporting all materials from

approved quarry site to work site with all lifts and leads by

mechanical transprot, head

1 Sqm

(one

square

metre)

V.Strengthening and improvement of balance existing roads including new formation of service road with construction of box

culvert and providing earthern drain at SIC, Nilakottai.

CONTRACTOR



SE

4 4300.00

Cum (Four

thousand

and three

hundred

cubic metres

only)

Providing & laying Wet mix macadam Base course of

250mm compacted thickness in two layers or else as specified

on the prepared sub base with graded stone aggregateds and

granular materials of quality size and grading placed in layers

as specified, inlcuding mixing in base mix plant, spreading in

uniform layer with motor grader and compaction wih vibrating

rollers of 80 to 100 KN static weight and fine dressing to

required grade and corss slope as shown in drawing as per

techincal speficiation clause 406 of MORT & H. and as directed

by SIPCOT officials.

1 Cum

(one cubic

metre)

5 18600.00

Sqm

(Eighteen

thousand

and six

hundred

Square

metres only)

Providing & laying prime coat over WMM surface using 7 Kgs

of Bitumen emulsion for 10 Sq.m area including cost and

conveyance of Bitumen binder inlcuding labour charges for

preparing the surface and applying the required quantity as

tack coat by bitumen sprayer etc. complete per clause 502 of

MORT & H and as directed by SIPCOT Officials.

1 Sqm

(one

square

metre)

6 18600.00

Sqm

(Eighteen

thousand

and six

hundred

square

metres only)

Providing & laying Tack coat over treated WMM surface using

2.50 Kgs of Bitumen emulsion for 10 Sq.m srea including cost

and conveyance of Bitumen binder inlcuding labour charges

for preparing the surface and applying the required quanity as

tack coat by Bitumen sprayer etc complete as per clause 503

of MORT & H speficiations and as directed by SIPCOT officials.

1 Sqm

(one

square

metre)

CONTRACTOR



SE

7 950.00 Cum

(Nine

hundred and

fifty Cubic

metres only)

Providing & laying 50/60/75mm compacted thickness dense

bituminuous macadam using 0.35 cum of 26.5 - 13.2 mm

graded IRC size metal 0.21 cum of 13.2 - 2.36mm IRC graded

metal and 0.14 cubic metre of 2.36mm and below IRC size

HBG metal with 0.01 cum of quarry dust and 49.50 Kg of

bitumen 60/70 for premixing for 10Sq.meter inlcuding cost

and conveyance of all materials to CMP site inlcuding cost and

conveyance of bitumen and cement to CMP site heating the

bitumen and aggregate to required temperature and mixing

1 Cum

(one cubic

metre)

8 18600.00

Sqm

(Eighteen

thousand

and six

hundred

square

metres only)

Providing & laying tack coat over Bituminous surface using

2.00 kg bitumen to cut back for 10 Sq.m area including cost

and conveyanc of bitumen binder including labour charges for

preparing the surface and applying the required quantity as

tack coat by bitumen sprayer etc. complete as per clause 503

of MORT & H specification.

1 Sqm

(one

square

metre)

CONTRACTOR



SE

9 580.00 Cum

(Five

hundred and

eighty cubic

metres only)

Providing and laying 30 mm/40mm compacted thickness

bituminous concrete using 0.13 cum of 19.0 - 9.5 mm graded

IRC size HBG metal 0.17 cum of 9.5-2.36mm IRC graded

metal and 0.26 Cum. of 2.36 mm and below size graded metal

with 50.30 of bitumen grade VG 30/VG40 confirming to IS 73

for pre mixing for 10 Sq. meter and using materials as per

table 500 - 17 and staifying the physical requirement for

material for course aggregates for BC as per table 500 - 16 of

MORTH REV-V including cost and conveyance of all materials

to CMP site, heating the bitumen andaggregates to required

temperature and mixing them in required temperature in

central hot mix plant 20-30 tonnes capacity, conveyin the mix

by tipper trucks to paver site spreading the mix in required

temperature for uniform thickness of 40mm with mechanical

paver to the specified grades and cross sections and

consolidation 80 - 100 kn vibratory / Pneumatic road roller tot

eh requeired density etc., including labour charges for loading

the bitumen in bitumen tank and metal to feeder unit, labour

for attending to paver site etc., including hire, fuel charges for

20 - 30 tonnes capacity CMP unit bitumen boiler, tipper trucks,

paver finaisher / 9m paver finisher / vibratory / Pneumatice

road roller and all other tools and plants required, including

fuel and other incidental charges.

1 Cum

(one cubic

metre)

CONTRACTOR



SE

10 150.00 Rm

(One

hundred and

fifty running

metres only)

Supplying, Laying and fixing of 300 mm dia RCC NP2 class

pipe with collars for cable duct arrangements including labour

charges for hoisting and placing the pipes and collars in

position etc., complete and as directed by SIPCOT Officials.

1 Rm

(One

running

metre)

11 800.00 Sqm

(Eight

hundred

square

metres only)

Providing and laying centre line / edgeline marking with

white hot applied thermoplastic compound 150 mm wide of

high quality 2.5 mm thick inlcuding reflectrising glass beads @

250gms per area, thickness of 2.5mm is exclusive of surface

applied glass beads as per IRC : 35 inlcuding cost and

coveyance of all materials to the work site inlcuding labour

charges for machinery and all other incidental charges et.

complete as per MORT & H specification and as directed by

SIPCOT Officerss. The finished surface to be level, uniformly

and free from streaks and holes.

1 Sqm

(one

square

metre)

12 970.00 Nos

(Nine

hundred and

seventy

Numbers

only)

Providing and fixing of road stud 100 X 100mm dia cast in

Aluminium resistent to corrosive effect of salt and frift, fitted

with lens reflections instaled in concrete asphalitic surface by

drilling hole 30mm upto a depth of 60mm and bodded in

suitable bituminous grout or epoxy mortar etc complete. (as

per BS : 873 (Part 4) 1973).

1 No

(Each)

CONTRACTOR



SE

13 18.00 Nos

(Eighteen

Numbers

only)

Providing & fixing of following siiizes of Retro Reflectorised

contionary mandatory and informatory signs with

definition board made out of High intensity prismatic Grade

sheeting conforming to IRC 67 - 2010 and ASTM D 4956 - 09,

Type IV specification and fixed over 1.5 mm thick Aluminium

sheet fixed on back supporting frame of 25 mm x 25 mm x 3

mm mild steel angle and supported on a mild steel angle iron

post 75 mm x 75 mm x 6 mm firmly fixed to teh ground by

means of properly designed foundation with M 15 grade

cement including 7 years warrenty for the Retro reflctive

sheeting as per clause 6.9 of IRC 67 : 2010 specification and

as per MORTH specification No.801, including cost of

foundation and all labour charges etc., complete and as

directeed by SIPCOT Officers.

60cm equilateral traiangle (with definition board)

1 No

(Each)

14 2800.00

Cum (Two

thousand

and eight

hundred

Cubic metres

only)

Gravel Filling including cost and conveyance of the same to

work site with an average lead of 1 Km inlcuding stacking the

same to departmental gauge for premeasurement including all

labour charges for laying, spreading etc, complete and as

directed by the SIPCOT Officials.

1 Cum

(One cubic

metre)

15 230.00 Sqm

(Two

hundred and

thirty square

metres only)

Culvert white washing two coats with best quality shll lime,

including all necessary materials etc., complete and as

directed by SIPCOT Officials.

1 Sqm

(One

square

metre)

CONTRACTOR



SE

16 60.00 Cum

(Sixty cubic

metres only)

Earth work excavation in all classes of soils such as hard tiff

clay, stiff block cotton, hard red earth, shales, murram etc.

except hard rock requiring blastering as per SS 20B and

depositing on bank with all leads and lifts inlcuding cost of all

materials, labour, equipments and all other incidental charges

for foundation as per standard specification and as directed by

SIPCOT Officials.

1 Cum

(One cubic

metre)

17 5.00 Cum

(Five cubic

metres only)

Supplying and filling of stone dust to a thickness of 300mm

including cost and conveyance of stone dust at work site

inlcuding labour charges for spreading etc complete for

bottom of Culvert as per standard specification and as directed

by SIPCOT Officials.

1 Cum

(One cubic

metre)

18 5.00 Cum

(Five cubic

metres only)

Plain cement concrete 1:4:8 using 40mm ISS Size HBG metal

including cost and conveyance of all materials towork site

including cost and conveyance of cement labour charges for

form work and centering, labour charges maching for mixing

of concrete, transporting, laying, vibrating, compacting and

curing with all leads for soft potable water, hire and fuel

charges for all tools and plants including all other incidental

charges such as bailing out water, forming protective bunds,

cofferdams and shoring strutting etc. complete for footings of

body wall and substructure as per standard specification and

as directed by SIPCOT Officials.

1 Cum

(One cubic

metre)

CONTRACTOR



SE

19 Providing formwork for centering for sides and soffits for

reinfoced cement concrete slab (or ) plain surfaces including

strutting upto 3.00m height using MS sheets of Size 90 X 60

cm and BG 10F guage stiffened with welded MS angles of Size

25 X 25 X 3 mm laid over silver oak ( country wood) joints of

size 10 X 6.50 cm space at about 90 cm C/c of 10 cm to 13

cm dia ( space 75 cm c/c) as per standard spefication and as


a 73.00 Sqm

(Seventy

three square

metres only)

Vertical Surface 1 Sqm

(One

square

metre)

b 17.00 Sqm

(Seventy

Square

metres only)

Plain Surface 1 Sqm

(One

square

metre)

20 26.00 Cum

(Twenty six

cubic metres

only)

Providing Reinforced cement concrete 1:11/2:3 using 20mm

HBG ISS stone jelly including cost and cenveyance of all

required materials at site and all labour charges for mixing

concrete, laying, curing, vibrating charges, hire charges for all

tools and plants and all other incidental charges etc., complete

as per standard specification and as directed by the SIPCOT

Officials.

1 Cum

(One cubic

metre)

CONTRACTOR



SE

21 39.00 Qtl

(Thirty nine

quintal only)

Supplying fabrication & of HCRM (High Corrsive resistant

metal ) grills including cost of Steel.

1 Qtl (One

quintal

only)

22 10.00 Sqm

(Ten square

metres only)

White washing two coats with best quality shell lime, including

all necessary materials etc., complete as per standard

specification and as directed by SIPCOT Officials.

1 Sqm

(One

square

metre)

23 9100.00

Cum (Nine

thousand

and one

hundred

Cubic metres

only)

Earth work excavation in all classes of soils such as hard stiff






SIPCOT Officials.

1 Cum

(One cubic

metre)

SubToatalSection V - 23 items (Twenty three items only)

CONTRACTOR



SE

1 3030.00

Sqm (Three

thousand

and thirty

square

metres only)

Clearing the light jungle with uprooting as per standard



1 Sqm

(One

square

metre)

2 220.00 Sqm

(Two

hundred and

twenty

square

metres only)

Clearing the Scrub jungle with uprooting as per standard



1 Sqm

(One

square

metre)

3 700.00 Sqm

(Seven

hundred

square

metres only)

Kerb Wall Painting two coats with best quality Paint, including

all necessary materials etc., complete as per standard

specification and as directed by SIPCOT Officials.

1 Sqm

(One

square

metre)

4 7.00 Cum

(Seven cubic

metres only)

Brick Work C.M 1:5 using second class ground moulded

chamber burnt bricks of size9''x4 3/2''x3/4'' including curing

etc.,complete as per standard specification and as directed by

SIPCOT Officials.

1 Cum

(one cubic

metre)

VI.Special repairs to roads, fencing for Bus terminal area and renovation of A.O.Block at SIPCOT Industrial Complex,

Manamadurai

CONTRACTOR



SE

5 190.00 Sqm

(One

hundred and

ninety

square

metres only)

Plastering C.M 1:3 10mm thick using cement mortar

including curing etc.,complete as per standard specification

and as directed by SIPCOT Officials

1 Sqm

(One

square

metre)

6 200.00 Sqm

(Two

hundred

square

metres only)

Culvert White washing two coats with best quality shell lime,

including all necessary materials etc., complete as per

standard specification and as directed by SIPCOT Officials.

1 Sqm

(One

square

metre)

7 6000.00

Cum (Six

thousand

cubic metres

only)

Earth work excavation in all classes of soils such as hard tiff






SIPCOT Officials.

1 Cum

(one cubic

metre)

8 40.00 Nos

(Fourty

Numbers

only)

Supply and erection of Precast RCC post of Dimension 0.1 x

0.1 x 2 m for Barbed wire fencing along the perimeter of the

plot proposed for parking including steel fabrication

1 No

(Each)

9 5.00 Cum

(Five cubic

metres only)

Earth work excavation and depositing on bank with initial lead

and lift in Hard stiff clay, stiff black cotton soil etc., complete

as per SS 20 B specifications.

1 Cum

(one cubic

metre)

CONTRACTOR



SE

10 115.00 Rm

(One

hundred and

fifteen

running

metres only)

Supplying and Fixing of GI Barbed wire Fencing of GI wire 10

Gauge and 2 Ply four pronged tied Horizontally and Vertically

Strut at an interval of 0.30m to a height of 1.70m including

tying etc., complete and as directed by SIPCOT officers.

1 Rm

(One

running

metre)

11 4.00 Sqm

(Four square

metres only)

Centring all round for gate pillars (Box type) 1 Sqm

(One

square

metre)

12 1.00 Cum

(One cubic

metres only)

Providing vibratory reinforced cement Concrete mix 1 : 2 : 4

using 20 mm HBG ISS stone jelly and using concrete mixer

machin including cost and conveyance of all required materials

at site excluding cost of centering, shuttering and strutting

and MS / RTS reinforcement grill in position but including all

labour charges for mixing concrete, laying, curing, vibrating

charges, hire charges for all tools and plants and all other

incidental charges pipe etc., complete as per standard

specification and as directed by the SIPCOT Officers

1 Cum

(one cubic

metre)

13 1.50 Qtl

(One point

ffifty quintal

only)

Supplying, Fabricating and placing in position M.S / T.R.S.

grills including cost of steel and binding wire and labour for

cutting, bending, tying, placing in position etc. completee

complying with standard specification and as directed by

SIPCOT Officers.

1 Qtl (One

quintal

only)

CONTRACTOR



SE

14 448.00 kg

(Four

hundred and

fourty eight

kilograms

only)

Supply and fixing of MS Grill two leafed entrance gate of width

3.5 m each and height 1.6 m

1 Kg (One

kilogram)

15 9.00 Cum

(Nine cubic

metres only)

Flooring Concrete CC 1:5:10 using HBG Jelly including

laying to the required thickness finishing nearly forming

covers., complete complying with standard specification and

as directed by "SIPCOT" officers.

1 Cum

(One cubic

metre)

16 30.00 Sqm

(Thirty

square

metres only)

Dismatling of weathering course with Prestressed tiles 1 Sqm

(One

square

metre)

17 3.00 Cum

(Three cubic

metres only)

Weathering Course with Concrete using best quality

broken brick jelly of 20mm uniform guage in pure freshly

burnt slaked like (stone like) (no sand to be used) the

popotion of brick jelly to like being 32:12:5., complete


"SIPCOT" officers.

1 Cum

(One cubic

metre)

CONTRACTOR



SE

18 30.00 Sqm

(Thirty

square

metres only)

Finishing the top roof with one course of best approved

quality machine pressed squre tiles size 230mmx230mm thick

of approved quality CM 1:3, 12mm thick mixed with WPC at

2% by weuight of cement used and pointing the joints nearly

to full depth of tiles with the same cement mortar mixed with

water proofing compound and Red oxide including curing etc.,

complete complying with standard specification and as

directed by "SIPCOT" officers.

1 Sqm

(One

square

metre)

19 6.00 Cum

(Six cubic

metres only)

Dismantling Concrete damaged RCC concrete of sunshade

facia complete complying with standard specification and as


1 Cum

(One cubic

metre)

20 6.00 Cum

(Six cubic

metres only)

Providing RCC 1:1 1/2 : 3 concrete for sunshade facia

Sunshade Facia using machine crushed hard broken granite

stone jelly 20mm gauge for all RCC items of works excluding

centering shuttering and cost os Ms/RTS reinforcement grills

placed in including machune mixing of concrete laying

vibrating etc., complete complying with standard specification

and as directed by "SIPCOT" officers.

1 Cum

(One cubic

metre)

21 150.00 Sqm

(One

hundred and

fifty square

metres only)

Special Plastering and finishing all surface with cement

Mortar 1:3 10mm thick in all floors including hacking the

surfaces and providing necessary beadings,noisings, curing

etc., complete complying with standard specification and as


1 Sqm

(One

square

metre)

CONTRACTOR



SE

22 960.00 Sqm

(Nine

hundred and

sixty square

metres only)

Painting Two Coats with approved best quality cement paint

over cement plastered wall surface, ceiling and other new

surface (total three coats - one priming coat with cement

paint including cleaning and preparing the surface complete

the rate include cost of all materials, brushed scaffolding

charges all labour charges etc.complying with standard

specification and as directed by "SIPCOT" officers.

1 Sqm

(One

square

metre)

23 310.00 Sqm

(Three

hundred and

ten square

metres only)

Supplying and painting one coat of redymix paint over old iron

works of approved quality and including labours etc., as

directed by SIPCOT officials

1 Sqm

(One

square

metre)

24 70.00 Sqm

(Seventy

square

metres only)

Providing formwork for centering for sides and soffits for

reinfoced cement concrete slab (or ) plain surfaces including

strutting upto 3.00m height using MS sheets of Size 90 X 60

cm and BG 10F guage stiffened with welded MS angles of Size

25 X 25 X 3 mm laid over silver oak ( country wood) joints of

size 10 X 6.50 cm space at about 90 cm C/c of 10 cm to 13

cm dia ( space 75 cm c/c) as per standard spefication and as


1 Sqm

(One

square

metre)

CONTRACTOR



SE

25 1140.00

Sqm (One

thousand

and one

hundred and

fourty

square

metres only)

White washing two coats with best quality shell lime,

including all necessary materials etc., complete as per

standard specification and as directed by SIPCOT Officials.

(allround )

1 Sqm

(One

square

metre)

26 75.00 Sqm

(Seventy five

square

meter only)

Polishing with one coat of approved quality sheenlac polish for

the old wood work., complete as per standard specification

and as directed by SIPCOT Officials. (allround )

1 Sqm

(One

square

metre)

SubToatalSection VI - 26 items (Twenty six items only)

CONTRACTOR



SE

1 900.00 Rm

(Nine

hundred

running

metres only)

Manufacturing and fixing cement concrete Precast Block of

size 450 mm x 200 mm x 500 mm as directed by SIPCOT

Officers.

1 Rm

(One

running

metre)

2 7380.00

Sqm (Seven

thousand

and three

hundred and

eighty

square

metres only)

Plastering the damaged kerb wall with cement mortor 1:3

12mm thick as directed by the SIPCOT Officers etc.,

1 Sqm

(one

square

metre)

3 2630.00

Sqm (Two

thousand

and six

hundred and

thirty square

metres only)

Painting two coats of black and white bands alternatively each

coat separately using black and white enamel paints of

approved quality including cost and conveyance of paint,

painting articles and utensils, labour charges etc., complete


SIPCOT Officers.

1 Sqm

(one

square

metre)

SubToatal

VII.Repair works to kerb wall in all roads at DTA in SIPCOT Industrial Growth Centre, Perundurai.

Section VII - 3 items (Three items only)

CONTRACTOR



SE

1 5100.00

Sqm (Five

thousand

and one

hundred

square

metres only)

Clearing Scrub jungle and cleaning away from the site as

shown by the SIPCOT Officers and well burnt out the same

with all other incldental charges etc., complete as per

standard specification and as directed by SIPCOT officers.

1 Sqm

(One

square

metre)

2 80500.00

Sqm (Eighty

thousand

and five

hundred

square

metres only)

Clearing light jungle and cleaning away from the site as




1 Sqm

(One

square

metre)

3 377000.00

Sqm (Three

lakhs and

seventy

seven

thousand

square

metres only)

Clearing Heavy jungle and cleaning away from the site as




1 Sqm

(One

square

metre)

VIII.Clearing the jungles along the roads on both sides, centre median and OSR area including desilting of storm water drain,

Spcial repairs of road work RNS parks & SEZ road and uplifting works on all roads at SIPCOT Industrial Growth Centre,

Oragadam.

CONTRACTOR



SE

4 14000.00

Cum

(Fourteen

thousand

Cubic metres

only)

Desilting of RCC/PCC/R.R Storm water drain under water

including removal of jungle and silt from the drain and

disposed the silt to the low lying area as directed by SIPCOT

Officers.

1 Cum

(one cubic

metre)

5 6000.00

Sqm (Six

thousand

square

metres only)

Picking the existing BT surface 1 Sqm

(One

square

metre)

6 1500.00

Cum (One

thousand

and five

hundred

Cubic metre

only)

Providing and laying, spreading and compacting graded stone

aggreates to Wet Mix Macadam Base Course of 250mm

compacted thickness specification in two layers of 125mm

thick each or else as specified on the prepared sub base by

providing approved Coarse graded material conforming to

Table 400 - 13 and satisfying the physical requirement for

material for WMM as per Table 400 - 12 of MORTH Rev.-5,

including pre-mixing the materials with water at OMC in

mechanical mix plant carriage of mixed matrerial by tipper to

site laying in uniform layers with favours in subbase/ base

course on well prepared surface and compacting with

vibratory roller to achieve the desired density including cost of

material, labour charges, rental for machinery, fuel and all

other incidental charges etc., complete as per clause 406 of

MORTH Rev.-5 and as directed by SIPCOT Officers.

1 Cum

(one cubic

metre)

CONTRACTOR



SE

7 18200.00

Sqm

(Eighteen

thousand

and two

hundred

square

metres only)

Providing and laying Prime coat over wet mix macadam

surface using 7.00 Kg bitumen emulson for 10 sqm area

including cost and conveyance of bitumen binder including

labour charges for preparing the surface and applying the

required quantity as tack coat by bitumen sprayer

etc.complete as per clause 502 of MORT & H specifications.

1 Sqm

(One

square

metre)

8 18200.00

Sqm

(Eighteen

thousand

and two

hundred

square

metres only)

Providing and laying Tack coat over treated wet mix macadam

surface using 2.50 Kg bitumen emulson to cut back for 10

sqm area including cost and conveyance of bitumen binder

including labour charges for preparing the surface and

applying the required quantity as prime coat by bitumen

sprayer etc.complete as per clause 503 of MORT & H

specifications.

1 Sqm

(One

square

metre)

CONTRACTOR



SE

9 910.00 Cum

(Nine

hundred and

ten cubic

metres only)

Providing and laying 50 mm compacted thickness dense

bituminous macadam using 0.35 cum of 26.50 -13.20 mm IRC

size graded metal 0.21 cum of 13.20 - 2.36mm IRC graded

metal and 0.14 cum of 2.36mm and below IRC size HBG metal

with 49.00 kg of VG30/VG40 bitumen for premixing for 10

Sq.meter includin cost and conveyance of all materials to CMP

site including cost and conveyance of bitumen and other

materilas to CMP site heating the bitumen and aggregates to

required temperature and mixing them in required

temperature in central hoti mix plant 20-30 tonnes capacity,

conveying the mix by tipper trucks to paver site, spreading

the mix in required temperature for uniform thickness of

50mm with mechanical paver to the specified grades and

cross sections and compaction by vibratory Pneumatic Roller

to the required density etc., including labour charges for

loading the bitumen in bitumen tank and metal to feeder unit,

labour for attending to paver site etc., including hire,fuel

charges for 20-30 tonnes capacity CMP unit bitumen boiler,

tipper trucks, paver finisher/9 m paver finisher,

vibratary/Pneumatic Roller, and al other tools & plants

required including fuel and all other incidental charges etc.,

complete asper specification using CMP as per clause 505

MORTH REV. V Specification and as per direction of SIPCOT

Officers.

1 Cum

(one cubic

metre)

CONTRACTOR



SE

10 18200.00

Sqm

(Eighteen

thousand

and two

hundred

square

metres only)

Providing and laying Tack coat over Bituminous surface using

2.00 Kg bitumen emulson to cut back for 10 sqm area

including cost and conveyance of bitumen binder including

labour charges for preparing the surface and applying the

required quantity as tack coat by bitumen sprayer

etc.complete as per clause 503 of MORT & H specifications.

1 Sqm

(One

square

metre)

11 728.00 Cum

(Seven

hundred and

twenty eight

cubic metres

only)

Providing and laying 40mm compacted thickness bituminous

concrete using 0.40 cum of 19.0 - 9.5 mm graded IRC size

HBG metal 0.22 cum of 9.5-2.36mm IRC graded metal and

0.28 Cum. of 2.36 mm and below size graded metal with

43.28 of bitumen grade VG 30 confirming to IS 73 for pre

mixing for 10 Sq. meter and using materials as per table 500 -

17 and satisfying the physical requirement for material for

course aggregates for BC as per table 500 - 16 of MORTH REV-

V including cost and conveyance of all materials to CMP site ,

heating the bitumen andaggregates to required temperature

and mixing them in required temperature in central hot mix

plant 20-30 tonnes capacity, conveyin the mix by tipper trucks

to paver site spreading the mix

1 Cum

(one cubic

metre)

CONTRACTOR



SE

in required temperature for uniform thickness of 40mm with

mechanical paver to the specified grades and cross sections

and consolidation 80-100 kn vibratory/Pneumatic road roller

to the required density etc., including labour charges for

loading the bitumen in bitumen tank and metal to feeder unit,

labour for attending to paver site etc., including hire, fuel

charges for 20-30 tonnes capacity CMP unit bitumen boiler,

tipper trucks, paver finaisher/9 m paver finisher

/Vibratory/Pneumatice road roller , and all other tools and

plants requried, including fuel and all other incidental charges

etc., complete as per specification using CMPP as per clause

507 OF MORTH REV. specification and as directed by SIPCOT

Officers.

12 37000.00

Cum (Thirty

seven

thousand

cubic metres

only)

Filling the hard shoulder portion with good qaulity earth with a

conveyance of 5 km belt around SIPCOT area in layers of not

more than 15cm thick well watering, ramming and

consolidation etc. complete complying with standard

specifications and as directed by "SIPCOT" officers.

1 Cum

(One cubic

metre)

13 4500.00

Sqm (Four

thousand

and five

hundred

square

metres only)

Providing and laying of hot applied thermo plastic compound

2.5 mm thick including refletorising glass beads @ 250 gms

per Sq.m. area, thickness of 2.50 mm is exclusive of surface

applied glass beads as per IRC : 35. The finished surface to be

level, uniform and free from streaks and holes etc., complete

as per MORTH Specification No. 803 and as directed by

SIPCOT officers

1 Sqm

(One

square

metre)

CONTRACTOR



SE

14 16750.00

Sqm

(Sixteen

thousand

and seven

hundred and

fifty square

metres only)

Providing and fixing reflective Road studs of category 'B'

Raised pavement markers made out of poly carbonate / ABS

moulded body and reflective panels (bi-convex reflectors) with

micro prismatic lens capable of providing total internal

reflection of the light entering the lens face with retro-

reflectance and chromaticity values conforming to ASTM

D4280. The reflective raised pavement markers shall also

confirm to the MORTH circular No.RW / NH.

33023/10/97.DO.III dt. 11.06.97 and the length, height and

width of the body shall not be less than 100 mm, 15 mm and

90 mm and base of marker shall be flat within 1.3 mm. The

marker shall supplort a load of 13635 kg tested in accordance

with ASTM D4280. Lenses shall be moulded of Polycarbonate

or methyl methecrylate conforming to ASTM D788. The area

of each retro - reflectory surface shall not be less than 13.0

sq.cm. The slope or retro - reflectory surface shall be 35 + 5

degree to base. Each reflector shall have a CIL not less than

values specified in table 2 of said MORT &H circular and two

cylindrical Polymer Shanks of not less than 20 mm diameter

and not less than 30 mm length shall be provided for better

anchorage.

1 Sqm

(One

square

metre)

15 1750.00

Sqm (One

thousand

and seven

hundred and

fifty square

metres only)

Plastering with cement mortar 1:5, 20mm thick in external

walls and concrete including cost and conveyance of all

materials to site of work, mixing, curing etc complete as per

standard specification and as directed by SIPCOT Officers

1 Sqm

(One

square

metre)

CONTRACTOR



SE

16 4600.00

Sqm (Four

thousand

and six

hundred

square

metres only)


coat seperately using black and white enamal paints of


painting articles and utencils, labour charges etc. complete


SIPCOT officers.

1 Sqm

(One

square

metre)

17 400.00 Sqm

(Four

Hundred

square

metres only)

White washing 2 coats using slaked shell lime including

cleaning and preparing the surface by thoroughly scrapping

the old surface wherever necessary the rate shall include cost

of all materials, brush, all labour charges etc., Complete

complying with standard specifications and as directed by

SIPCOT Officials.

1 Sqm

(One

square

metre)

Section VIII - 17 items (Seventy items only)

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 2850.00

Cum

(Two

Thousand

Eight

Hundred and

Fifty cubic

metres only)

1 Cum

(One cubic

metre)

Section IX - 1 item (One item only) Sub Total

Description of Work

Earth work excavation and depositing on bank with a lead of 3

km including initial lead of 10m and lift of 2m in hard stiff clay

black cotton hard red earth, shales, murram, ordinary gravel,

stone earth and earth mixed with small size boulders for

foundation except hard rock requiring blasting etc., complete

with standard specification and as directed by SIPCOT

Officers.

IX. De-Silting of Storm Water Drain in Phase - I at SIPCOT Industrial Complex, Hosur.

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 73550.00

Sqm

(Seventy

Three

Thousand

Five Hundred

and Fifty

square

metres only)

1 Sqm

(One

square

metre)

Section X - 1 item (One item only) Sub Total

X. Clearing of Scrub jungles in Roads and Common Purpose area at SIPCOT Industrial Complex, Phase - II and Expansion - I &

II - Hosur.

Description of Work

Clearing of Scrub Jungles and cleaning away from the site and

well burnt at the same use all other incidental charges etc.,

complete as per standard specification and as directed by

SIPCOT Officers.

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 80000 Sqm

(Eighty

Thousand

square

meter only)

1 Sqm

(One

square

metre)

2 8000 Cum

(Eight

thousand

cubic metres

only)

Conveyance charges for 3km 1 Cum

(One cubic

metre)

Section XI - 2 items (Two item only) Sub Total

XI. Clearing the Light jungles in DTA area at SIPCOT Industrial Complex, Bargur.

Description of Work

Clearing of Scrub Jungles and cleaning away from the site and

well burnt at the same use all other incidental charges etc.,

complete as per standard specification and as directed by

SIPCOT Officers.

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 820.00 Sqm

(Eight

Hundred and

Twenty

square

meter only)

1 Sqm

(One

square

metre)

2 400.00 Sqm

(Four

Hundred

square

meter only)

1 Sqm

(One

square

metre)


coat separately using black and white enamel paints of


painting articles and utencils, labour charges etc., complete


SIPCOT Officers.

Providing and laying Centreline/Edgeline marking with white

hot applied thermoplastic compound 150mm wide of high

quality 2.5mm thick including reflectorising glass beads @250

gms per sqm area, thickness of 2.5mm is exclusive of surface

applied glass beads as per IRC:35. The finished surface to be

level, uniform and free from streaks and holes etc., including

cost and conveyance of all materials to the work site including

labour charges for machinery and all other incidental charges

etc.complete as per MORTH specification and as directed by

SIPCOT officers.

XII. Kerb Wall Painting, Line Marking and Providing Road Stud at SIPCOT Industrial Complex, Cheyyar.

Description of Work

CONTRACTOR



SE

3 670.00 Nos

(Six Hundred

and Seventy

numbers

only)

1No

(Each)

Section XII - 3 items (One items only) Sub Total

Providing and fixing reflective Road studs of category 'B'

Raised pavement markers made out of poly carbonate / ABS

moulded body and reflective panels (bi-convex reflectors) with

micro prismatic lens capable of providing total internal

reflection of the light entering the lens face with retro-

reflectance and chromaticity values conforming to ASTM

D4280. The reflective raised pavement markers shall also

confirm to the MORTH circular No.RW / NH.

33023/10/97.DO.III dt. 11.06.97 and the length, height and

width of the body shall not be less than 100 mm, 15 mm and

90 mm and base of marker shall be flat within 1.3 mm. The

marker shall supplort a load of 13635 kg tested in accordance

with ASTM D4280. Lenses shall be moulded of Polycarbonate

or methyl methecrylate conforming to ASTM D788. The area

of each retro - reflectory surface shall not be less than 13.0

sq.cm. The slope or retro - reflectory surface shall be 35 + 5

degree to base. Each reflector shall have a CIL not less than

values specified in table 2 of said MORT &H circular and two

cylindrical Polymer Shanks of not less than 20 mm diameter

and not less than 30 mm length shall be provided for better

anchorage etc., Complete complying with standard

specification and as directed by the SIPCOT Officers.

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 8300.00

Sqm

(Eight

Thousand

and Three

Hundred

square

meter only)

1 Sqm

(One

square

metre)

2 860.00 Cum

(Eight

Hundred and

Sixty cubic

metre only)

1 Cum

(One cubic

metre)

Section XIII - 2 items (Two items only) Sub Total

XIII. Jungle Clearance and De-Silting the drains at SIPCOT Industrial Complex, Cheyyar.

Description of Work

Clearing light jungles after setting out the alignment including

grubbing the root, bush, wastage logs and other debris, etc.,

complete as directed by SIPCOT Officers.

Earth work excavation for in all classes of soils such as sand

silt other loose soil, wet sand or silt not under water, light

back cotton soil including excavated earth except hard rock

requiring blasting as per SS 20B with intial lead of 10m and lift

of 2m and conveying the earth to a lead of 2Km and deposting

on the places shown by the Project Officer including cost of

labour, tools and plants and including all other incidental

charges etc., complete and as directed by SIPCOT officers for

clearing earth deposited in drains.

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 210000.00

Sqm

(Two Lakhs

Ten

Thousand

square

metres only)

1 Sqm

(One

square

metre)

Section XIV - 1 item (One item only) Sub Total

XIV. Jungle Clearance for OSR area at SIPCOT Industrial Complex, Cheyyar.

Description of Work

Clearing light jungles after setting out the alignment including

grubbing the root, bush, wastage logs and other debris, etc.,

complete as directed by SIPCOT Officers.

CONTRACTOR



SE

Sl.

No.

Quantity TNBP

No.


and in words (Rs.)

Unit Amount

(In Rupees)

1 1370.00

Sqm

(One

Thousand

and three

hundred and

seventy

square

metres only)

1 Sqm

(One

square

metre)

2 10.00 Sqm

(Ten square

metres only)

1 Sqm

(One

square

metre)

Section XV - 2 items (Two items only) Sub Total

XV. Painting for Existing Compound Wall around A.O.Block at SIPCOT Industrial Complex, Cheyyar.

Description of Work

Painting two coats with approved cement paint over one coat

of priming coat over including cement plastered exposed

surface cleaning, preparing the surface and curing etc.,


Painting with synthetic enamel paint two coat over old iron

work including cost of all material and labour charges etc.,


CONTRACTOR



SE

Schedule€-€A€€ EMD : Tender Date : 19.12.2019 Rs.4,12,000/- … · 2019-12-13 · 2.50 Kgs...

Documents

Transcript of Schedule€-€A€€ EMD : Tender Date : 19.12.2019 Rs.4,12,000/- … · 2019-12-13 · 2.50 Kgs...