Scale for powered walkie and rider pallet trucks · 2019. 11. 29. · RPW EL. FUNCTIONS See...

RPW EL

For check weighing and preventing errors in order picking

Data transfer to WMS or ERP systems

Optional WiFi or Bluetooth output

Original fork height will slightly change

Fits all makes and models

WAREHOUSE TRUCK SCALES

Scale for powered walkie and rider pallet trucks

BENEFITS

Top quality

AJSCI Logo EPS in white box

TS L

FT R

AVA

S-LF

T-pr

intR

PW E

L EN

USA

rev.

16.0

4.28

Cha

nges

rese

rved

OPTIONS*

* The use of options may change related specifications

Cold store version Stainless steel fork cover Different fork lengths

Double scale option, two scales installed in a double length fork, designed for order

UniMobile PDA software Bluetooth, WiFi or serial output Thermal or matrix printer

NTEP-approved scale for commercial transactions (with 310 indicator)

RPW EL

FUNCTIONS

See relevant indicator specification sheet

Functions of 110, 310, 610 or Touch weight indicator

The RAVAS indicators have been developed exclusively for mobile applications. They are robust and resistant to shocks and vibrations. RAVAS indicators are compact and have a low power consumption. All indicators are dust and waterproof, according to norm NEMA 4 standards. RAVAS mobile scales can be used outdoors and on freight trucks.

STANDARD SPECIFICATIONS

Power supply from truck battery, power converter integrated in indicator housing

Protection class NEMA 4 / IP65

Scale tolerance 0.1% of the load lifted

Graduation 2 lb

Capacity same as lifting capacity of the truck

MODIFICATION OF THE TRUCKAll brands of electric pallet trucks and order picking trucks can be equipped with the RPW EL scale. The modification procedure is: 1. The fork construction of the truck is mechanically modified, 2. The scale components are installed in the forks, 3. The indicator is mounted on the body of the truck, 4. The fork cover is installed 5. After calibration the scale is ready for use in daily operation. A scale indicator of your choice shows the weight on the forks and communicates with a truck terminal or warehouse management system if desired.

Dimensions in inches Tolerances +/- 0.1 inch

DIMENSIONS AFTER MODIFICATION

E + 1Width over the forks

D + 0.25Maximum fork height

C + 0.25Minimum fork height

B + 1Fork width

A + 0.5Fork length

various Standard fork length

AJSCI Logo EPS

AJSCI Contact Info Black EPS

iFORKS

5 Minutes installation

Completely wireless: no cabling

Digital calibration

Weight correction for forklift mast tilt

No de-rating of lift truck capacity

Energy eicient power management

Fork LED’s indicate battery status

Tested 1,000,000 cycles at 125% of capacity

FORKLIFT TRUCK SCALES

Completely wireless fork scale

BENEFITS

Top qualityPlug & weigh

OPTIONS*

* The use of options may change related specifications. rev.20170508

iFORKSIIFORKS

Automatic and manual zero correction

Gross/net weighing

Automatic tare and manual tare weight entry

Totalling with sequence number

ID-code entry (5 digits)

Piece counting, by sampling or piece weight entry

Three data output modes: print, continuous and command/answer

Power management user menu

Internal clock for date and time

Error messages in display

Auto shut-of function for optimal battery life

Overload protection 200%

FUNCTIONS DIMENSIONS IN MM


Each fork has his own rechargeable battery pack which includes a charger for both batteries

Indicator powered by 4 AA-batteries

The system has an auto shut-of function for optimal battery life

The operator can customize the power settings in the ‘Power Management’ menu on the indicator

* (in combination with rotators: capacity reduction of 15%)

Capacity 5,000, 6,000 or 10,000 lb *

Graduation multirange: 2 - 5 lb at 5,000 lb capacity 2 - 5 lb at 6,000 lb capacity 5 - 10 lb at 10,000 lb capacity

System tolerance 0.1% of the load lifted

Display LCD, digit height 0.7 inch, adjustable backlight

Signal transfer Bluetooth, class 1

Controls 4 function keys, on/of key


NTEP-approved scale for commercial transactions, 5,000 x 5 lb

Thermal or matrix printer (6V or 12V)

Bluetooth, WiFi or serial output

UniMobile / UniWin software for data capture & transfer

12 - 12V regulator for fixed power supply on IC trucks

Electronic level correction sensor, compensates for up to 5° tilting of the mast

Different fork lengths

POWER SUPPLY

Class II

5,000lb*

Class III

6,000lb*

Class III

10,000lb*

A Fork length 42 42 42

B Fork width 5.25 6 6.8

C Height above carriage 2.7 2.7 2.8

D Height carriage 16 20 20

D” Distance claws

E Fork drop** A/B 3/6 3/8 3/8

F Distance between carriage and stop plate

3.15 3.15 3.9

G Thickness of fork tip 0.6 0.6 0.6

H Width of fork base 4 4.7 5.5

I Width of battery pack 2 2 2

J Height of stop plate 3.5 3.5 3.5

K Fork height 2.4 2.4 2.9

L Thickness fork 2.4 2.4 3

Weight, per fork 147 lb 175 lb 260 lb

Tolerance +/- 0.1 inch

* Capacity specifi ed at load centre point 24 inch

** Specify fork drop type upon order, tolerance dimension

+/- 0.2 inch

AJSCI Logo EPS


iFORKS TOUCH




USB port for data capture


Programmable user interface

7.1” touchscreen indicator with advanced functions


Completely wireless fork scale with Touch screen indicator

BENEFITS

The hi-tech standardPlug & weigh

TS L

FT R

AVA

S-LF

T-pr

intiF

ORK

S TO

UCH

EN

USA

rev.

18.0

2.07

Cha

nges

rese

rved

OPTIONS*



Electronic level correction sensor, compensates for up to 5° tilting of the mast

Extra set of rechargeable battery packs Customized print layout Thermal (barcode) or matrix printer

Cubetape connection via Bluetooth Bluetooth, WiFi or serial output Barcode reader via USB port FlexBlock technology for higher accuracy NTEP-approved scale for commercial transactions

iFORKS TOUCH

FUNCTIONS

Weighing, Counting, Totalizing and Dosing




Entry of alphanumeric codes

Automatic and manual tare via touch screen

Gross/net weighing



Battery cycle time 50 hours on fully charged batteries

Fork LED’s on/off status


Signal transfer wireless

Display 7.1 inch, high resolution touch screen


5 - 10 lb at 10,000 lb capacity



Graduation Multirange

Capacity 5,000, 6,000 or 10,000 lb

POWER SUPPLY

Indicator 12V by truck battery

Fork modules by rechargeable 6V battery packs, charger included.

Tolerance +/- 0.1 inch * Capacity specified at load centre point 24 inch ** Specify fork drop type upon order, tolerance dimension +/- 0.2 inch

DIMENSIONS IN INCHES

Class II 5,000 lb*

and stop plate

Class III 6,000 lb*

147 lbWeight, per fork 175 lb 260 lb

L 2.4Thickness fork 2.4 3

K 2.4Fork height 2.4 2.9

J 3.5Height of stop plate 3.5 3.5

I 2Width of battery pack 2 2

H 4Width of fork base 4.7 5.5

G 0.6Thickness of fork tip 0.6 0.6

F 3.15Distance between carriage 3.15 3.9

E 3/6Fork drop** A/B 3/8 3/8

D 16Height carriage 20 40

C 3.9Height above carriage 3.9 4.0

B 5.25Fork width 6 6.8

A 42Fork length 42 42

Class III 10,000 lb*

AJSCI Logo EPS


Logistics iForks


Fork LED’s indicate battery status

Bluetooth data transfer

Digital calibration


5 Minutes installation

Extra thin forks for easy handling of low pallets


Completely wireless fork scale with extra thin forks

BENEFITS

Top qualityPlug & weigh

TS L

FT R

AVA

S-LF

T-pr

intL

ogis

tics

iFor

ks E

N U

SA re

v.16

.10.

07 C

hang

es re

serv

ed

OPTIONS*


Extra rechargeable fork battery packs

Electronic level correction sensor, compensates for up to 5º tilting of the mast


12 - 12V regulator for fixed power supply on diesel and gas trucks

Integrated power converter 24V-72V for indicator power supply via truck battery

UniMobile PDA software Bluetooth, WiFi or serial output Thermal (12V) or matrix (12V) printer

Logistics iForks

FUNCTIONS


Auto shut-off function for optimal battery life




Three data output modes: print, continuous and command/answer


ID-code entry (5 digits)


Automatic tare and manual tare weight entry

Gross/net weighing




Controls 4 function keys, on/off key

Signal transfer Bluetooth, class 1



Graduation multirange: 0 - 2000 lb in 2 lb steps, 2000 - 5000 lb in 5 lb steps

Capacity 5,000 lb

POWER SUPPLY

The operator can customize the power settings in the ‘Power Management’ menu on the indicator

The system has an auto shut-off function for optimal battery life

Indicator powered by 4 AA-batteries

Easily exchangeable, rechargeable, ergonomic and robust battery pack on each fork. Charger included.

Tolerance +/- 0.1 inch * Capacity specified at load centre point 20 inch


Class II 5000 lb*

180 lbWeight, per fork

L 2.05Thickness fork

K 1.9Fork height

J 3.5Height of stop plate

I 3.35Width of battery pack

H 5.3Width of fork base

G 0.4Thickness of fork tip

and stop plate

F 2.9Distance between carriage

E 3Fork drop

D 16Height carriage

C 2.7Height above carriage

B 6.4Fork width

A 42Fork length

A

B

D

E

C

F

L

JK

HI

G

AJSCI Logo EPS


RCS

For shipping weights, avoiding overloads and safety checks

Suitable for rough applications

Indicator with 4 AA-batteries

For all capacity trucks

Easy installation

Optional available with overload buzzer

Attractively priced load check system for forklifts


Hydraulic load indication for forklift trucks

BENEFITS

Top qualityBest price

TS L

FT R

AVA

S-LF

T-pr

intR

CS

EN U

SA re

v.16

.04.

28 C

hang

es re

serv

ed

OPTIONS*


Overload buzzer Thermal printer


12V power supply from truck battery

RCS

HOW RCS WORKS• Markings on the forklift mast indicate the weight read-out point, • The load is lifted until just past the markings on the mast, • Then the load is lowered to the reference markings, • After 3 seconds the indicator shows the weight.

SYSTEM PACKAGE

Operator manual

Mounting- and calibration instructions

Lifting height reference mark stickers

Indicator 110 with 4 AA-batteries and mounting bracket

Sealing ring

Weighing sensor


Auto shut-off after 3 minutes of non-use

Battery cycle time 6 months, when used normally

Power supply 6Vdc from 4 AA-batteries


Display LCD, digit height 0.7 inch


System tolerance 2% of system capacity at centered load (se table on the right)

50 lb at 20,000 lb capacity


Graduation 10 lb at 5.000 lb capacity

Capacity to fit the capacity of the truck (5,000, 10,000 or 20,000 lb)

* Tolerance may occur above or below the weight on the display

WEIGHING TOLERANCESMAXIMUM TOLERANCE *

400 lb20,000 lb

400 lb15,000 lb

200 lb10,000 lb

200 lb6,000 lb

100 lb5,000 lb

100 lb4,000 lb

100 lb2,000 lb

100 lb500 lb

LIFTING CAPACITY

AJSCI Logo EPS


RCS Hy-Q

Use in combination with rotators and clamps

Overload indication in display

Less sensitive to load center point eccentricity

High accuracy hydraulic scale


Hydraulic scale for forklift trucks and reach trucks

BENEFITS

Top qualityIndestructible


Intuitive full color graphic display guides the user

No manifold block: easy and cost efficient installation

TS L

FT R

AVA

S-LF

T-pr

intR

CS

Hy-

Q E

N E

U re

v.15

.09.

10 C

hang

es re

serv

ed

OPTIONS*

* The use of options may change related specifications, changes reserved, rev.20160428

RCS Hy-Q

Manual zero correction

Self-learning zero correction

Gross/Net weighing (by tare weighing or preset tare entry)

Total function with five separate registers that can be named by the operator. Name length max. 16 alpha-numeric characters

Overload indication, based on actual hydraulic pressure, not on calculated weight

Error message in display

FUNCTIONS

Two sensors in a metal strip mounted against the mast measure the lifting and lowering speed of the forks. While the load passes the trajectory between the two sensors, the indicator samples the hydraulic pressure output of the sensor approximately 1000 times and calculates an average value. The weighing is done UP and DOWN: the load is lifted, and then lowered past the two sensors within a predefined speed bandwidth.

Hy-Q indicator with graphic display

RAM indicator mounting support

Oil pressure sensor G¼” BSP male

Metal strip with 2 sensors for mast mounting

Magnet, to be installed on the carriage plate

Installation- and calibration manual

Operator manual

SYSTEM PACKAGE


Warning: the 0.2% tolerance can only be guaranteed when the truck mast is in good condition.

Capacity 5,000 lb till 200,000 lb

Graduation 5 lb at 5,000 lb capacity 10 lb at 10,000 lb capacity 20 lb kg at 20,000 lb capacity 50 lb at 50,000 lb capacity 100 lb at 100.000 lb capacity 200 lb at 200,000 lb capacity

System tolerance 0.2% of the scale capacity

Display Grafic full-color display

Keyboard 9 keys

Protection class NEMA 4

Power supply 12Vdc, from truck battery

Power convertor 80/ 72/48/36/24 Vdc – 12 Vdc RS232 output for printer or data transfer (only 1 port available) Thermal or matrix printer in separate housing Bluetooth or WiFi output WeighScan data collector with built-in 1D barcode scanner CubeTape digital dimensioning tape Level switch to indicate forklift mast tilt position at display

HOW RCS HY-Q WORKS

AJSCI Logo EPS


RCS PLUS

Easy to calibrate



For trucks with capacities up to 65,000 Lbs

Used with any forklift attachment

Accurate hydraulic scale


Hydraulic scale for forklift trucks

BENEFITS

Top qualityGood accuracy

TS L

FT R

AVA

S-LF

T-pr

intR

CS

PLU

S EN

USA

rev.

16.0

4.28

Cha

nges

rese

rved

OPTIONS*


Bluetooth, WiFi or serial output Thermal printer


High capacity hydraulic valve block, for capacities above 65,000 lb; graduation 100 lb

RCS PLUS

FUNCTIONS


lb/kg toggle


Code entry (5-digit)

Manual tare entry

Gross/net weighing

Manual zero correction

HOW RCS PLUS WORKS• Markings on the forklift mast indicate the reference height point, • The load is lifted until the markings line up, • Press the red ‘weigh’ button on the indicator, • During a controlled descent of the forks, the weight is measured • The weight is shown on the indicator.

SYSTEM PACKAGE

Operator manual

Installation- and calibration instructions

Lifting height reference mark stickers

Indicator 310 plus RAM indicator mounting support

Hydraulic valve block with oil pressure sensor and flow adjustment regulator


Power supply 12Vdc, from truck battery




System tolerance 0.2% of the scale capacity



Graduation 5 lb at 5,000 lb capacity

Capacity 5,000, 10,000 or 20,000 lb

Please note: the 0.2% tolerance can only be guaranteed if the truck mast is in good condition and the weighing system is used correctly. Rollers and bearings in the mast should be properly lubricated. During weighing, the mast should be in vertical position, the load should be placed in the center of the forks.

AJSCI Logo EPS


RVL

Data transfer to WMS or ERP systems

Max. tolerance 0.2% of the load lifted

For use with rotators and clamps

No cabling


Wireless carriage plate scale for couterbalanced trucks

BENEFITS

Top qualityFor industrial use

TS L

FT R

AVA

S-LF

T-pr

intR

VL E

N U

SA re

v.16

.04.

28 C

hang

es re

serv

ed

OPTIONS*


Smaller display graduations


UniMobile PDA software Thermal or matrix printer in separate housing WeighScan Different width Bluetooth, WiFi or serial output

RVL

FUNCTIONS

See indicator specification sheet

Functions of 110, 310, 610 or Touch weight indicator

The RAVAS indicators have been developed exclusively for mobile applications. They are robust and resistant to shocks and vibrations. RAVAS indicators are compact and have a low power consumption. All indicators are dust and waterproof, according to norm IP65. RAVAS mobile scales can be used outdoors.


Power supply from truck battery, via regulator

Cabling via spiral cable






Graduation 5 lb at 5,000 lb capacity

Capacity 5,000, 10,000 or 15,000 lb


Class 2 5000 lb*

Class 3 10000 lb*

500 lb 1000 lb 1430 lb

F 1/3 A 1/3 A 1/3 A

E 4.72 6.69 8.27

D 16 20 25

C 2.56 3.15 4.33

B 4.33 5.31 6.30

A1 35 36.2 45.7

A 41.5 44.1 55.1

Class 4 15000 lb*

DE

B

A

A'

F

CC

AJSCI Logo EPS


RAVAS-110

For checking incoming goods and shipping weights

Low power consumption

Competitive pricing

All basic scale functions

The RAVAS work horse

HAND PALLET TRUCK SCALES

Pallet truck scale with basic scale functions

BENEFITS:

Top qualityFor industrial use

TS L

FT R

AVA

S-LF

T-pr

intR

AVA

S-11

0 EN

USA

rev.

16.0

4.28

Cha

nges

rese

rved

OPTIONS*


Polyurethan tandem loading wheels Nylon steering wheels

Polyurethan steering wheels Foot brake Width over forks 22 inch Stainless steel chassis with polymer housing Integrated thermal printer

RAVAS-110

FUNCTIONS

Low battery warning in display

Auto shut off after 3 minutes of non-use



Gross/net weighing



Pump quick lift

Battery life one year, when used 5 times a day

Power supply 4 x 1.5V AA-batteries in battery drawer

Own weight 270 lb

Finishing / Color epoxy coated / red, RAL3000

Loading wheels polyurethane, single

Steering wheels rubber


Keypad 3 function keys, on/off button

Display LCD, digit height 0.7 inch

Max. inaccuracy 0.1% of the load lifted

Graduation 2 lb

Weighing capacity 5,000 lb


F 24Height to top indicator

E 27.2Width over forks

4.8Lifting height

D 8Maximum fork height

0.87Ground clearance

C 3.25Minimum fork height

B 7.1Fork width

A 48.0Fork length

AJSCI Logo EPS


RAVAS-226x

10x higher display resolution for mixing and batching

Stainless steel fork cover

Rotating display, visible from all sides during dosing operations

Rechargeable and exchangeable battery

Large, 6-digit LED display

FM approved for USA and Canada

For safe weighing in hazardous areas


Explosion proof pallet truck scale

BENEFITS

Top qualityFor hazardous areas

TS L

FT R

AVA

S-LF

T-pr

intR

AVA

S-22

6x E

N U

SA re

v.20

1702

03

Chan

ges

rese

rved

OPTIONS*


Footbrake

Width over forks 22 inch

FlexBolt technology for extra small graduation; 0-2000 lb x 0.2 lb

Graduation: 0-5000 lb x 0.5 lb

Stainless steel chassis with stainless steel housing (WOF = 22”; L = 45.3”; H = 3.5”; B = 7.1”)

Extra rechargeable and exchangeable battery pack

RAVAS-226x

FUNCTIONS

lb/kg toggle

10x higher display resolution

Automatic switch-off after 30 minutes of non-use

Automatic tare by push button


On/off key


FM Certification Class I,II,III Division 1, Groups A-G, Temperature class T4, Ta = 104 F


Own weight 330 lbs


Steering wheels rubber, antistatic

Charging time approximately 6 hours

Battery cycle time 70 hours


Display 6 digits, 1.2 inch


Graduation 1 lb



F 43Height to top indicator

E 27Width over forks

4,75Lifting height


C 3,25Minimum fork height

B 6,7Fork width

A 48Fork length

AJSCI Logo EPS


RAVAS-310

Standard NTEP approved

Standard thermal printer

Automatic dosing function

Three communication protocols

Internal clock for date/time

For counting parts, dosing and mixing


Pallet truck scale with extended scale functions

BENEFITS

Top quality Advanced functions

OPTIONS*

RAVAS-310


Gross/net weighing

Automatic and manual tare



Piece counting by sampling

Piece counting by entry of piece weight

Printing of date, time, counted pieces, gross/net weight, total weight

Internal clock


Automatic switch-of after 30 minutes of non-use

kg/lb toggle

FUNCTIONS DIMENSIONS IN MM

STANDARD SPECIFICATIONS Weighing capacity max. 5,000 lb

Graduation multirange: 0 - 3,000 lb: graduation 1 lb or 5,000 lb: graduation 2 lb


Display LCD, digit height 0.7 inch, backlight

Keypad 5 function keys, on/of key

Protection class load cells NEMA 5, display NEMA 4 (printer excluded)

Battery 12Vdc/1.2Ah, exchangeable; battery charger included

Battery life 35 hours, low battery indication in display

Charger 110/120 Volt / 12 Vdc - 300 mA


Steering wheels polyurethane


Colour red (RAL 3000), epoxy painted

Own weight 285 lb

Pump quick lift

Extra exchangeable battery pack Bluetooth or WLAN output UniMobile / UniWin software for data capture & transfer

A Fork length 48

B Fork width 7.1

C Minimum fork height

Ground clearence

3.25

0.87

D Maximum fork height

Lifting height

8

4.8

E Width over forks 27.2

F Height to top indicator

31

AJSCI Logo EPS


RAVAS-610

For parts counting and special applications

RS232, RS485, 4-20 mA, 0-10V output

Programmable scale functions

Pivoting indicator

Advanced parts counting function


Pallet truck scale with programmable scale functions

BENEFITS

Top qualityCustomised functions

TS L

FT R

AVA

S-LF

T-pr

intR

AVA

S-61

0 EN

USA

rev.

2017

0203

Cha

nges

rese

rved

OPTIONS*


Different fork dimensions Footbrake or handbrake

Stainless steel (WOF = 22”; L = 45.3”; H = 3.5”; B = 7.1”)

Stainless steel fork shoes Multirange graduation 0.5/1/2 lb

Barcode reader/barcode printer (Touch) Extra exchangeable battery pack Client specific software (610s) Bluetooth or WLAN output Built-in thermal printer

RAVAS-610

FUNCTIONS

Automatic switch off after 15 minutes of no use


Printer power supply is switched on and off by the indicator



Piece counting by sampling or calculation of piece weights


Internal memory for 9 pre-set tare values

Entry of alphanumeric codes (max. 10 characters)

Automatic and manual tare through numeric keypad

Gross/net weighing



Pump quick lift

Own weight 270 lb

Color red (RAL 3000), epoxy painted



Charger 110/120 Volt / 12 Vdc - 300 mA

Battery life 8 hours, charging time 6 hours

Battery 12V exchangeable battery module

Power consumption 170 mA

Protection class load cells NEMA 5, display NEMA 4 (printer excluded)

Foil keypad 20 keys

Display Pivoting LCD display, digit height 0.55 inch with backlight


3,000 - 5,000 lb: graduation 2 lb

0 - 3,000 lb: graduation 1 lb

Graduation multirange:



F 39.5Height top indicator


4.8Lifting height




B 7.1Fork width

A 48Fork length

AJSCI Logo EPS


RAVAS ProLine 310

100 hours battery cycle time

Heavy duty battery packs, exchangeable and rechargeable

Superb accuracy thanks to FlexBolt® technology


Custom designed for professional use

BENEFITS

The hi-tech standardExtremely accurate

TS L

FT R

AVA

S-LF

T-pr

intR

AVA

S Pr

oLin

e 31

0 EN

USA

rev.

2017

0203

Cha

nges

rese

rved

OPTIONS*


2 extra exchangeable battery packs Foot brake Width over forks 22 inch

Integrated thermal printer Bluetooth, WiFi or serial output Stainless steel fork cover


NTEP-approved scale for commercial transactions (3,000 x 1 lb or 5,000 x 2 lb

RAVAS ProLine 310

FUNCTIONS

Automatic switch-off after 30 minutes of non-use


Internal clock

Printing of date, time, counted pieces, gross/net weight, total weight

Piece counting by sampling or entering of piece weight



Automatic and manual tare

Gross/net weighing




Own weight 396 lb

Pump quick lift




Charger 110V NiMH charger

Battery cycle time 100 hours, low battery indication 5 hours before automatic switch-off

Battery 12Vdc NiMH, exchangeable; battery charger included


Keypad 5 function keys, on/off key

Display LCD, digit height 0.7 inch, backlight



400 - 1,000 lb: graduation 0.5 lb

0 - 400 lb: graduation 0.2 lb

Graduation Multirange



F 42.3Height to top indicator


4.75Lifting height




B 7.1Fork width

A 48Fork length

AJSCI Logo EPS


RAVAS ProLine 610

For parts counting and special applications

25 hours battery cycle time

Alphanumeric keyboard

Digital and analogue outputs

Heavy duty battery packs, exchangeable and rechargeable


Identify, weigh, register


Pallet truck scale with programmable scale functions

BENEFITS


TS L

FT R

AVA

S-LF

T-pr

intR

AVA

S Pr

oLin

e 61

0 EN

USA

rev.

2017

0203

Cha

nges

rese

rved

OPTIONS*


Foot brake Width over forks 22 inch


0.2 lb graduation, maximum 2,500 lb capacity Bluetooth, WiFi or serial output Integrated thermal printer 2 extra exchangeable battery packs

RAVAS ProLine 610

FUNCTIONS

Automatic switch off after 15 minutes of no use


Printer power supply is switched on and off by the indicator


Functions through parameters: - different print layout (on demand) - different basic functionality (e.g. dosing)


Totalling function

Internal memory for 9 pre-set tare values

Entry of alphanumeric codes (max. 10 characters)

Automatic and manual tare through numeric keypad

Gross/net weighing



Pump quick lift

Own weight 396 lb





Battery cycle time 25 hours

Battery 12Vdc NiMH, exchangeable; battery charger included



Foil keypad 20 keys

Display Pivoting LCD display, digit height 0.55 inch with backlight










4.75Lifting height




B 7.1Fork width

A 48Fork length

AJSCI Logo EPS


RAVAS ProLine Touch

USB-port for data capture

Advanced scale functions, e.g. dosing

Programmable user interface

Intuitive, user friendly graphics



7.1 inch touch screen indicator with advanced functions


Pallet truck scale with programmable touch screen indicator

BENEFITS


TS L

FT R

AVA

S-LF

T-pr

intR

AVA

S Pr

oLin

e To

uch

EN U

SA re

v.20

1702

03 C

hang

es re

serv

ed

OPTIONS*


Barcode reader via USB-port

Foot brake Width over forks 22 inch


Stainless steel fork cover

0.2 lb graduation, maximum 2,500 lb capacity Bluetooth, WiFi or serial output Integrated thermal printer 2 extra exchangeable battery packs Customized software

RAVAS ProLine Touch

FUNCTIONS

Weighing, Counting, Totalizing and Dosing



Piece counting by sampling or calculation of piece weights

Totalling


Automatic and manual tare via touch screen

Gross/net weighing



Pump quick lift

Own weight 396 lb





Battery cycle time 15 hours, charging time 6 hours

Battery 12V, by 2 exchangeable battery modules 6V-4,8Ah



Display 7.1 inch, high resolution touch screen










4.75Lifting height




B 7.1Fork width

A 48Fork length

AJSCI Logo EPS


Scale for powered walkie and rider pallet trucks · 2019. 11. 29. · RPW EL. FUNCTIONS See...

Documents

Transcript of Scale for powered walkie and rider pallet trucks · 2019. 11. 29. · RPW EL. FUNCTIONS See...