scala - · PDF fileThe Scala luminaire is designed for lateral or suspended mounting as well...
Transcript of scala - · PDF fileThe Scala luminaire is designed for lateral or suspended mounting as well...
400
300
3076
1995
2289
3076
1995
2289
4577
850
8000-1
0800
1995 1995
8 - 10.8m
CONTEMPORARY COLUMN FOR THE CITY
Created by Jean-Michel
Wilmotte, the Lutecia range was
specifically developed for the
Scala luminaire.
LARGE MODELDesigned for the Scala Maxi
or Midi luminaire, the Lutecia
ensemble – large model – is
made up of a lighting column of
a height of between 8 and 10.8
metres for lighting avenues,
boulevards, public squares, etc.
The cylindrical-conical fluted or
smooth lighting column, made
of galvanised steel and thermo-
coated, is topped by a bracket,
single or double, made of cast
aluminium with an aluminium
tie rod.
For lighting pedestrian zones, a
configuration with a rear bracket
and Mini Scala is also available.
Colour: AKZO brown 650 sanded
Other colours on request
POLE WITH SINGLE BRACKET(SCALA MAXI)
POLE WITH REAR BRACKET (SCALA MAXI AND SCALA MINI)
POLE WITH DOUBLE BRACKET (SCALA MAXI)
MOUNTING BASE
Other mounting configurations on request
scala+lutecia
1480
37
6
500 500
10°
22
5
862
37
6
40
00
-60
00
500
212
313
400
200/3
00
SMALL MODELThe Lutecia ensemble is also
available for the Scala Mini
luminaire, for example for
lighting pedestrian zones.
It is made up of a fluted or
smooth cylindrical-conical
column made of galvanised steel
and thermo-coated, between
4 and 6 metres in height.
A single or double bracket made
of cast aluminium enables the
smallest of the Scala luminaires
to be mounted. A wall bracket is
also available.
Colour: AKZO brown 650 sanded
Other colours on request
MOUNTING BASE
Other mounting configurations on request
POLE WITH DOUBLE BRACKET(SCALA MINI)
POLE WITH SINGLE BRACKET (SCALA MINI)
WALL BRACKET
4 - 6m
scala+lutecia
H
Ø
500 417 333 250 167
15°/165°90°/270°
20°/160°90°/270°
90°
270°
180° 0°
90°
270°
180° 0°
90°
270°
180° 000°
9090°
270°270270
180° 0°
Reflector 1954 (Midi)
Reflector 1552 (Maxi)
Reflector 1627 (Mini)
Reflector 1289 (Maxi)
scala
FOR VARIOUS LAMPS AND REFLECTORS
Available in three sizes, the Scala Sealsafe® luminaire (IP 66)
may be fitted with various types of reflectors and light sources
of up to 400 W: high-pressure sodium, metal halide, metal halide
with a ceramic arc tube or even Cosmopolis lamps.
This great variety of photometric solutions is a major asset of this
luminaire, whose refined design blends perfectly into any urban
architectural setting.
As an option, a system of louvres makes it possible to control
forward and backward light flux.
Colour: AKZO brown 650 sanded
Other colours on request
LIGHT DISTRIBUTION
Scala Mini Midi Maxi
Ø 490 mm 590 mm 675 mm
H 167 mm 190 mm 230 mm
LAMPS – REFLECTORS
Models Mini Midi Maxi
Reflectors 1627 1954 1552 (*) 1289 1552 1954
High-pressure 150 W 250 W 250 W 400 W 250 W 250 Wsodium
Metal halide 150 W 250 W 250 W 400 W 250 W 250 W
Metal halide with 150 W 250 W 250 W - 250 W 250 Wceramic arc tube
Cosmopolis 140 W 140 W - - 140 W 140 W
Maximum power ratings(*) Control gear not built in for the 250 W versionCHARACTERISTICS – LUMINAIRES
Optical compartment tightness level: IP 66 Sealsafe® (*)
Control gear tightness level: IP 44 (Mini: IP 54) (*)
Impact resistance: - flat glass: IK 08 (**)
- curved polycarbonate: IK 10 (**)
- curved acrylic: IK 06 (**)
Aerodynamic resistance (CxS): - Mini: 0,062 m2
- Midi: 0,080 m2
- Maxi: 0,095 m2
Nominal voltage: 230 V – 50 Hz
Electrical class: I or II (option) (*)
Weight (empty): - Mini: 7,5 kg
- Midi: 10 kg
- Maxi: 15 kg
(*) according to IEC - EN 60598(**) according to IEC - EN 62262
Design: Jean-Michel Wilmotte
THREE SIZES
The Scala luminaire is available in three sizes: Mini, Midi and Maxi. It is made
up of a crown and a transition plate made of cast aluminium surmounted by a
dome made of spun aluminium.
The optical compartment – supported by the transition plate – is made up of a
reflector made of deep drawn, polished and anodised aluminium (or metallised
synthetic material) and a protector made of flat glass. A protector made of
polycarbonate or slightly rounded acrylic is optional.
INSTALLATION UP TO 12 METRES
The remarkable efficacy and photometric diversity available in the Scala range
enables installations to be considered at heights of up to 12 metres.
The Scala luminaire is designed for lateral or suspended mounting as well as
axial suspension on a catenary. Various types of lateral mounting solutions are
available (see the following pages).
INTEGRAL FLOODLIGHT
As an option, to illuminate foliage, the dome of the Scala Midi luminaire may be
fitted with an integral floodlight for 35 or 70 W metal halide lamps with ceramic arc
tubes. A choice can be made between a symmetrical or asymmetrical reflector (60°)
that can rotate through 360° in increments of 45°. The protector is made of clear
(asymmetric photometry) or prismatic (symmetric photometry) glass.
MAINTENANCE
The luminaire is opened, without tools, by loosening one 1/4-turn screw
(two for the Maxi version) and tilting the transition plate supporting the
Sealsafe® (IP 66) optical unit sideways on a hinge.
This operation gives access to the control gear plate and the lamp support plug.
Access is identical for the configuration with an integral floodlight (see photo).
Mini Midi Maxi
scala
Ø 60
min 110
2 x M10
40
40
49
(M
ax
i)
15
Ø8
90 mm
Ø 60
150 9022
Ø 49
2 x Ø8
85
2 x M5 (Ø60)
50
60
5015
Ø7
150
2 x M8
Ø60 > 120
140
110
85
2 x M5 (Ø60)
150
Ø 60
9022
2 x Ø8
Ø 49
SIDE ENTRY MOUNTING
DIRECT SIDE ENTRY MOUNTING
female on a plain spigot [D60F]- female on a plain spigot [D60F]- female, on a plain spigot [D60F]
- square [C40x40: Mini - Midi][C Mi i Midi]q [ 4 4 ]
[C40x49: Maxi]
male, on a female spigot [D60M]- male, on a female spigot [D60M]
SIDE ENTRY MOUNTING WITH KNUCKLE-JOINT
- female, on a 1” BSP threaded tube [R/G34F]4
- square [R/C 60x50]/C 60x50]
- male, on aa 1” female threaded tube [R/G34M]
- male, on a female spigot [R/D60M]a female spigot [R/D60M]
- direct wall or pole mountingl or pole mounting
POST-TOP MOUNTING (MINI - MIDI)- single [S-D60F] - double [D-D60F]
Note: for mounting on a wooden pole,
a mounting plate is required
2 x M6
50
50
50
50
Ø6
Ø15 60
80
70
50
2 x M6
scala
DIRECT SUSPENDED MOUNTING
- male, on a female threaded tube [G34F]
- female, on a male threaded tube [G34M]
SUSPENDED MOUNTING WITH KNUCKLE-JOINT
- male, on a female threaded tube [G34F]
- female, on a male threaded tube [G34M]
- squaresquare
- traditional
- tau
SUSPENDED MOUNTING
CATENARY MOUNTINGS
scala
FOR VARIOUS LAMPS AND REFLECTORS
SCALA + LUTECIAParis
France
SCALA + LUTECIAParis
France
SCALAParis
France
the urban light
Co
pyr
igh
t© S
chré
der
S.A
. 20
08
– T
he
info
rmat
ion
, des
crip
tio
ns
and
illu
stra
tio
ns
her
ein
are
of
on
ly a
n in
dic
ativ
e n
atu
re. D
ue
to a
dva
nce
d d
evel
op
men
ts, w
e m
ay b
e re
qu
ired
to
alt
er t
he
char
acte
rist
ics
of
ou
r p
rod
uct
s w
ith
ou
t n
oti
ce.
As
thes
e m
ay p
rese
nt
dif
fere
nt
char
acte
rist
ics
acco
rdin
g t
o t
he
req
uir
emen
ts o
f in
div
idu
al c
ou
ntr
ies,
we
invi
te y
ou
to
co
nsu
lt u
s.44
353-
Scal
a-br
-200
8-04
-AN
www.schreder.com