SBR MACHINES PET Stretch Blow Molding Machines
description
Transcript of SBR MACHINES PET Stretch Blow Molding Machines
SBR MACHINES
PET Stretch Blow Molding Machines
Ganesh B. Raut
(PROP.)
SBR Machines established in 2009 Pune.
Manufacturer of PET Stretch Blow Molding Machines.
We use Fully Pneumatic Technology in our machines.
We use HP PARKER and LP FESTO Pneumatic products.
Our machines help to Reduce all Expenses. [Labour, Electricity, Maintenance, space, etc.]
Our Engineer is more than 10 years Expertise.
SBR Machines always believe in R & D.
INTRODUCTION
VISION Market oriented QUALITY UPGRADATION
of PRODUCTS and SERVICE. To offer solutions for PET blowing industry
for EASY PRODUCTION and HIGHER PRODUCTIVITY.
New INNOVATION and TECHNOLOLGY in blow moulding machines continuously.
Higher Production QUALITY and QUANTITY at Low ELECTRICITY and LABOUR Cost
TYPE OF MACHINE
1. FULLY AUTOMATIC PET STRETCH BLOW MOULDING MACHINE
2. MINI AUTOMATIC PET STRETCH BLOW MOULDING MACHINE
FULLY AUTOMATIC MACHINE1. SM - 2L - 1C - PN. (1400 BPH)
2. SM - 1L - 2C - PN. (2600 BPH)
3. SM - 2L - 2C - PN. (2500 BPH)
4. SM - 0.5 - 4C - PN. (4500 BPH)
5. SM - 1L - 4C - PN. (4200 BPH)
6. SM - 2L - 4C - PN. (4000 BPH)
7. HSM - 1L - 6C - PN. (6600 BPH)
FULLY AUTOMATIC PET STRETCH BLOW MOULDING MACHINES.
FULLY AUTOMATIC PET STRETCH BLOW MOULDING MACHINES.
MINI AUTOMATIC MACHINES1. MA - 1L - 1C - PN. (1200
BPH)
2. MA - 2L - 1C - PN. (1100
BPH)
3. MA - 1L - 2C - PN. (2000
BPH)
4. MA - 2L - 2C - PN. (1900
BPH)
5. MA - 2L - 1C - 83Jar. (1000
BPH)
6. MA - 5L - 1C - 120Jar. (800
BPH)
7. MA - 20L - 1C - Jar. (100
BPH)
MINI AUTOMATIC PET STRETCH BLOW MOULDING MACHINES.
MINI AUTOMATIC PET STRETCH BLOW MOULDING MACHINES.
TECHNICAL FEATURES1. Pneumatic Clamping with Compensation system
for Better clamping force.2. Adequate mounting structure and ease for
maintenance.3. Pneumatic Stretching system. (Signal Cylinder
and Direct Cylinder Stretching )4. Centralize / One Side heating system for power
saving.5. Simple in operation and ease to mould
changeover.6. Festo make Low Pressure Pneumatics.7. PARKER make High Pressure & Low Pressure in
Blowing system.8. High Pressure Air recovery System for air and
power saving.9. We use Branded Touch Screen PLC.10. We provide Separate electrical control panel
with branded Siemens components and safety Protection features.
11. Temperature Indicator Display for heating chamber.
CONTACT DETAILS
Office-: 128-129, ‘A’ wing, Above Cosmos bank,
Jay Ganesh Samrajya, 1st Floor, Pune - Nashik Highway, Pnajarpol
Bhosari, PUNE. - 411 039.
Factory-: 626/13, Kurali MIDC, Chakan Opp. Gabriel Company, Tal-: Khed, Dist.-: Pune - 410 501 Maharashtra, India.
Mobile-: 8793044002 , 8793044010 , 8793044005.
Visit Our Web site-: www.sbrmachines.com
Email-: [email protected], [email protected], [email protected]
THANKS VISIT OUR COMPANY.