Sanderson Weatherall - Bidspotter

Sanderson Weatherall

Collective Sale of Feed and Flour Milling Machinery

Ended 18 Sep 2013 17:00 BST

Various Locations

throughout the UK

.

.

.

United Kingdom

Lot Description

0

Please see extra lots to the catalogue from lot 294 PLEASE ENSURE YOU REFRESH YOUR BIDDING SCREEN REGULARLY (use

the F5 button on your keyboard) Bidding closes from 12 noon Wednesday 18 September 2013 All lots are sold as seen and where lying.

It is assumed & strongly recommended that a ...[more]

1

PALADIN 2400x300 PELLETING PRESS, seial no A26/2785 REV, order no 0207-A-082year of manufacture 2002, with 2 x 165kW

electric motors, new rotor & bearings in 2010, very nice, purchasers will be assisted with loading and the lot is available for viewing &

collection from South Wales

2

Paladin 600-150 PELLETING PRESS, 3 roll design, with 2 x 75kW motors, 1 x set of roll assemblies, control panel, manufacturer's

service history, very good ex-mill condition (ref 2), purchasers will be assisted with loading and the lot is available for viewing &

collection from Kempsey, Worcester ...[more]

3Simon Barron Paladin 1200BHR PELLETING PRESS year of manufacture 1984 (no motor drives, no front plate, hydraulic pump

removed), purchasers will be assisted with loading and the lot is available for viewing & collection from Shepshed, Leicestershire

4

Van Aarsen C750 PELLETING PRESS, die dia. 750 x track 220mm, with 180kW motor, belt drive, year of manufacture 92, serial no

5678, c/w 1 x set of rolls and 6mm die fully refurbished, excellent condition (ref 3), purchasers will be assisted with loading and the lot is

available for viewing & collecti ...[more]

6

CPM 7800 PELLETING PRESS (7900 front work), with 185kW electric motor, control panel including starter, two dies (6mm wood & one

feed die) and set of rollers & shells, purchasers will be assisted with loading and the lot is available for viewing & collection from

Athestone, North Warwickshire

7

CPM 7000 7122-2 PELLETING PRESS, year of manufacture 1987, with 185kW electric motor, control panel 7mm die and two sets rolls

(this press is still commissioned and will not be available for collection until the end of November 2013), purchasers will be assisted with

loading and the lot is available ...[more]

8Buhler DPAS PELLETING PRESS, die dia. 660mm x track 228mm, with 200kW motor, auto greaser, 1 x set of roll assemblies ex-mill

condition, purchasers will be assisted with loading and the lot is available for viewing & collection from Kempsey, Worcestershire

9

Orbit Sizer 225/175 PELLETING PRESS, 225 gearbox converted to 175 die, with 90kW electric motor, base, fully refurbished, excellent

condition (ref 6), purchasers will be assisted with loading and the lot is available for viewing & collection from Kidderminster,

Worcestershire

10Milltech C95/185 PELLETING PRESS, 90kW motor, Base, ex-mill condition (ref 5), purchasers will be assisted with loading and the lot

is available for viewing & collection from Kempsey, Worcestershire

11Sizer ORBIT 175 PELLETING PRESS, serial no P0384S, with 75kW electric motor, 6mm x 100mm die and one pair rollers, purchasers

will be assisted with loading and the lot is available for viewing & collection from Todmorden, Lancashire

12

Christy & Norris X MILLEXTRA NO3 HAMMERMILL, 900mm wide rotor, 150kW motor, 2955 rpm, base frame, heavy duty machine, fully

refurbished (rotor balanced, new bearings, new wear plates, shot blasted & sprayed, motor serviced & checked) excellent condition (ref

22), purchasers will be assis ...[more]

13

Robinson Milling MULTIMILL 2 HAMMERMILL, c/w feeder, base, twin screw feeder, 150kW motor, base, very well maintained very

good ex-mill condition (ref 21), purchasers will be assisted with loading and the lot is available for viewing & collection from

Kidderminster, Worcestershire

14Christy & Norris X26 HAMMERMILL, c/w 90kW motor, base frame, fully refurbished Excellent condition (ref 23), purchasers will be

assisted with loading and the lot is available for viewing & collection from Kidderminster, Worcestershire

15CHRISTY & NORRIS X26 HAMMERMILL, 150kW electric motor and base, rotor balanced & new bearings (ref 36), purchasers will be


16Christy & Norris BRITON B7/2 HAMMER MILL GRINDER, mild steel, 18kW, 3000rpm, with pneumatic discharge (N3762-11),

purchasers will be assisted with loading and the lot is available for viewing & collection from Doncaster

17

Buhler DFZH-2 GRINDER, serial no 10305408, year of manufacture 1998, with 2 x 90kW electric motors, DFAT2 feeder serial number

10305409, year of manufacture 1998, with some screens and beaters (comment from vendor - in working order and could go straight

into service), purchasers will be assisted wi ...[more]

18

Buhler GRINDER ON BEDPLATE, with 132kW direct coupled motor, 700mm wide inside grinding chamber, complete with vibratory

feeder (ref 1538), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

19

Promill HAMMER MILL, twin drive swing beater hammermill, with plate magnet on the inlet duct and top mounted aspiration fan. With

two motors (removed) 160kW x 1487 rpm & control panel. The screen is 1200 mm wide and the rotor is about 1200mm diameter.

Screen area is approx. 2.5 square metres. Th ...[more]

19A

AB HAMMER MILL, mild steel hammer mill, 260mm dia. x 260mm face, with 300mm x 150mm feed chute, driven by 11kW 1460 rpm

belt drive, overall size 1100mm x 750mmx 2600mm high (N9936-11), purchasers will be assisted with loading and the lot is available for

viewing & collection from Doncaster

19BChristy & Norris 24 X 16 PULVERIZER, serial no 48597, c/w base, approx. 45kW electric motor, ex-mill condition (ref 35), purchasers

will be assisted with loading and the lot is available for viewing & collection from Kidderminster, Worcestershire

19CChristy & Norris 24 X 12 PULVERIZER, c/w Base, approx.. 35KW motor, fully refurbished (ref 34), purchasers will be assisted with

loading and the lot is available for viewing & collection from Kidderminster, Worcestershire

20

Buhler DFMF-S 4500 litre capacity RIBBON U-TROUGH MIXER (Omega Style), approx. 1.5mtrs dia. x 3.14mtrs long, with gearbox,

chain drive and electro pneumatic bomb door discharge. With 30kW Flender motor foot mounted unused second hand, complete with

drive chain The mixer has been cleaned, having the ...[more]

21Robinson Milling SERIES 3 4000 LITRE 3 TIER RIBBON MIXER, bomb doors, motor gearbox, chain drive, ex-mill condition (ref 37),

purchasers will be assisted with loading and the lot is available for viewing & collection from Kempsey, Worcestershire

22

14 CUBIC METRE RIBBON BLADE MIXER, mixer is 1.8 metres wide x 6.0 metres long, with a rotor diameter of about 1.7 metres. It has

a 37kW geared drive mounted on top of the mixer with a triplex chain drive and 4 No open outlets in the base, the drive chain has been

removed and is inside, has been used ...[more]

23

TWIN PADDLE BLADE MIXER approx.. 150L working capacity, manufactured in stainless steel, complete with bomb doors and drive,

all in very good working order, drive Sew Eurodrive geared motor 85 rpm out final chain drive, mixer 1110mm x 970 mm x 880mm high

(ref 1767), purchasers will be assisted with ...[more]

24Buhler 2000 LITRE PADDLE MIXER, mild steel construction, 15kW motor and gearbox, bomb doors, ex-mill condition (ref 28),

purchasers will be assisted with loading and the lot is available for viewing & collection from Kempsey, Worcestershire

25

Adelphi HORIZONTAL MIXER, in mild steel by "Adelphi" Preston, approximate dimensions 10ft long i/s x 4ft wide i/s x 4ft 6in deep,

complete with drive comprising of gearbox and motor (ref 2224), purchasers will be assisted with loading and the lot is available for

viewing & collection from Stoneh ...[more]

26

Ottevanger HORIZONTAL MIXER 1 TONNE COMPLETE ON LOAD CELLS, with motorized outlet slide, approx. dimensions 2.9 metres

long x 1 metre wide x 1.1metres high, c/w drive, all in working order (ref 0440/1), purchasers will be assisted with loading and the lot is

available for viewing & collection fr ...[more]

27Babcock Gardner 400 litre STEEL CASED MIXER, (no motor drive) (ref. S31), purchasers will be assisted with loading and the lot is

available for viewing & collection from Garston, Liverpool

28Porteus 11in x 36in DOUBLE ROLLER MILL, (ref. S39), purchasers will be assisted with loading and the lot is available for viewing &

collection from Garston, Liverpool

29Porteus 11in x 36in DOUBLE ROLLER MILL, (ref. S40), purchasers will be assisted with loading and the lot is available for viewing &


30Vickers 12in x 36in DOUBLE ROLLER MILL (ref. S42), purchasers will be assisted with loading and the lot is available for viewing &


31

Henry Simon MODEL G DOUBLE DIAGONAL FOUR ROLLER FLOUR MILL, serial no. 49421, with rolls as fitted, 10in x 40in? (no

motor drive) (ref. K1), purchasers will be assisted with loading and the lot is available for viewing & collection from Lockerbie, Dumfries

& Galloway

32

Henry Simon MODEL G DOUBLE DIAGONAL FOUR ROLLER FLOUR MILL, serial no. 49707, with rolls as fitted, 10in x 32in (no motor

drive) (ref. K2), purchasers will be assisted with loading and the lot is available for viewing & collection from Lockerbie, Dumfries &

Galloway

33



Galloway

34



Galloway

35



Galloway

36



Galloway

37ROLLING PLANT, with Booth Roller (single drive), feeder, discharge elevator and dust extractor unit (DCE) all in working order (ref

4684), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

38

Hebei Pingle 6F FLOUR ROLLER MILL, mild steel rolls 200mm dia. x 400mm face, with 5.5kW belt drive, overall size 1000mm x

850mm x 1700mm high (N10538-11), purchasers will be assisted with loading and the lot is available for viewing & collection from

Doncaster

39



Doncaster

40



Doncaster

41



Doncaster

42



Doncaster

43



Doncaster

44



Doncaster

45



Doncaster

46

Hebei Pingle FSFS DOUBLE BIN PLAN SIFTER, double or twin sided sieve, each side with up to 14 decks, designed to give 4

separations. deck size 830mm x 830mm x 80mm deep, overall size 2200mm x 1500mm x 2250mm high (N10527-16), purchasers will

be assisted with loading and the lot is available for vi ...[more]

47

Hebei Pingle TQLM63 FLAT DECK SCREEN, mild steel rotary flat deck screen, 800mm x 1400mm single deck, to separate impurities

from wheat, overall size 1000mm x 1700mm x 2000mm high (N10528-16), purchasers will be assisted with loading and the lot is

available for viewing & collection from Doncaster

48

Hebei Pingle TQLM63 FLAT DECK SCREEN, mild steel rotary flat deck screen, 800mm x 1400mm single deck, to separate impurities

from wheat, overall size 1000mm x 1700mm x 2000mm high (N10528-16), purchasers will be assisted with loading and the lot is


49

Hebei Pingle FPDW4 ROTARY SCREEN, mild steel rotary screen, 450mm dia. x 800mm face, with 215mm x 170mm feed, 0.75kW 910

rpm to belt drive, overall size 610mm x 1260mm x 1270mm high (N10529-16), purchasers will be assisted with loading and the lot is


50TE-MA T20 Galvanised Steel Cased Chain & Flight Conveyor, flights 110mm x 110mm, 7m long (N10540-39), purchasers will be

assisted with loading and the lot is available for viewing & collection from Doncaster

51

Hebei Pingle QXS DESTONER, mild steel suction and gravity destoner, single deck 400mm x 500mm, with 120mm dia. in/outlets with

1.1kW fan, overall size 1500mm x 650mm x 2400mm high (N10535-16), purchasers will be assisted with loading and the lot is available

for viewing & collection from Doncaster

52

Locker Rotex MS 42 TWIN DECK SCREEN, mild steel twin deck screen, 1080mm x 2135mm with 1.5kW drive motor mounted on mild

steel frame, 2950mm x 1420mm x 1220mm high (RC1255A-16), purchasers will be assisted with loading and the lot is available for

viewing & collection from Doncaster

53Turner 6ft x 4ft Two Deck Screen, serial no 95/4174, with gearbox serial no 95-3547, purchasers will be assisted with loading and the lot

is available for viewing & collection from Norwich

54 Airmaster RJC Bin Venting Unit, purchasers will be assisted with loading and the lot is available for viewing & collection from Norwich

5590 Degree Powered Roller Conveyor, 830mm wide on rollers, internal radius 800mm, purchasers will be assisted with loading and the

lot is available for viewing & collection from Norwich

56Fixed Height Flat Belt Conveyor, approx. 2800 mm long, purchasers will be assisted with loading and the lot is available for viewing &

collection from Norwich

57Flat Belt Conveyor, approx. 2240mm long with powered adjustable height motor, purchasers will be assisted with loading and the lot is

available for viewing & collection from Norwich

58Brown Cut Off saw, with 3 blades, nominal 305mm dia blade, purchasers will be assisted with loading and the lot is available for viewing

& collection from Norwich

59

Wiremek 8 x100 kVAr Power Factor Correction Capacitor Cabinet, with Eicar 12 stage controller, purchasers will be assisted with

loading and the lot is available for viewing & collection from Norwich (comments from vendor - I have examined the power factor

correction capacitor but can fin ...[more]

60Brook Crompton 55kW Electric Motor, 2980rpm, 2 pole, D250 S frame FLA 98 amps (understood to be suitable for Christy X15 grinder,

purchasers will be assisted with loading and the lot is available for viewing & collection from Norwich

61Micronizing Co (UK) GAS FIRED MICRONIZER, serial no MR20/20125/96, the lot is available for viewing & collection from Southern

Ireland

62Micronizing Co (UK) GAS FIRED MICRONIZER, serial no MR20/20111/96, the lot is available for viewing & collection from Southern

Ireland

63Andritz Sprout DS250WP STAINLESS STEEL TWIN FEED SCREW CONVEYOR, 2.4m long, excellent ex-mill condition (ref 11),

purchasers will be assisted with loading and the lot is available for viewing & collection from Worcestershire

64

Argentum SINGLE DECK VIBRATORY SCREEN, year of manufacture 1996, screen size approx. 2200mm x 900mm, serial no 300821,

with 2 x 1.6kW vibrating motors, good ex-mill condition (ref 12), purchasers will be assisted with loading and the lot is available for

viewing & collection from Kidderminster, ...[more]

65

PTN SR60 SINGLE DECK ROTARY VIBRATING SCREEN, fully refurbished (ref 15), purchasers will be assisted with loading and the

lot is available for viewing & collection from Kidderminster, Worcestershire (PLEASE NOTE THIS SCREEN IS A SINGLE DECK NOT

TWO DECK AS LISTED IN THE CATALOGUE)

66PRESS CONDITIONER, new build, 2.1m x 450m mild steel construction, twin inlets for additives, 11kW motor, new condition (ref 26),

purchasers will be assisted with loading and the lot is available for viewing & collection from Kidderminster, Worcestershire

67Le Coq 530 ROTARY SCREEN, 7.5kW electric motor, fully refurbished excellent condition (ref 16), purchasers will be assisted with


68Le Coq 510 ROTARY BRUSH SCREEN, fully refurbished (ref 17), purchasers will be assisted with loading and the lot is available for

viewing & collection from Kidderminster, Worcestershire

69Simon Baron SISCAN ROTARY BRUSH SCREEN, 15kW electric motor, fully refurbished excellent condition (ref 18), purchasers will be


69A

Simon Barron A3 crumbler , fully refurbished to include full strip down , roll reflute , shot blast , new bearings on drives , motor check

and service , rebuild and respray , purchasers will be assisted with loading and the lot is available for viewing & collection from

Kidderminster,

70Locker Rotex SCREEN, 1850 x 750, 4 outlets, 1.75kW motor, very good ex-mill condition (ref 20), purchasers will be assisted with


71Hick Hargreaves Blow Line Pump System, very good condition (ref 30), purchasers will be assisted with loading and the lot is available

for viewing & collection from Kidderminster, Worcestershire

72CPM STAINLESS STEEL CONDITIONER, 2000mm x 450mm, 15kW electric motor, 4in steam and additive inlet, good ex-mill condition

(ref 25), purchasers will be assisted with loading and the lot is available for viewing & collection from Kidderminster, Worcestershire

73Demag 250kg SWL Jib Arm Crane, 3.5m high overall, 3.3m radius with Demag electric chain winch (ref 39), purchasers will be assisted

with loading and the lot is available for viewing & collection from Kidderminster, Worcestershire

74DCE Unimaster Dust Collection Unit, ex-mill condition (ref 40), purchasers will be assisted with loading and the lot is available for

viewing & collection from Kidderminster, Worcestershire

75Turner Single Deck Screen, 6 x 4 with set of screens (ref 41), purchasers will be assisted with loading and the lot is available for viewing

& collection from Kidderminster, Worcestershire

76

Hopper Discharge Conveyor, 250mm dia., 2.55m long, refurbished with new 3.6kW electric motor & gearbox, one discharge outlet (ref

42), purchasers will be assisted with loading and the lot is available for viewing & collection from Kidderminster, Worcestershire

FURTHER INFO Inlet 1690mm x 530 ...[more]

77Atlas Copco GAS30 PACKAGE AIR COMPRESSOR, serial no AII316935, 30kW, max working pressure 7.5bar (ref 43), purchasers will

be assisted with loading and the lot is available for viewing & collection from Kidderminster, Worcestershire

78Hankison HHD Plus Series HH DP480CE-G Compressed Air Drier, serial no HHDP 480CE-G40003000005 (ref 44), purchasers will be


79T A Shore T160 10kg-50kg Packing Weigher, serial no. 2264, with control panel (ref. 31), purchasers will be assisted with loading and

the lot is available for viewing & collection from Kempsey, Worcestershire

80Halifax Centrifugal Fan, 18.5kW, 2940rpm, serial no 63481, size 27/26 MEB, good condition (ref 32), purchasers will be assisted with

loading and the lot is available for viewing & collection from Kempsey, Worcestershire

81Keith Blackburn Centrifugal Fan, 18.5kW, 2910rpm, serial no R08/62173, good condition, (ref 33), purchasers will be assisted with


82La Meccanica STAINLESS STEEL TWIN CONDITIONER, 400mm dia., 2.64m long, with two electric motors (ref45), purchasers will be

assisted with loading and the lot is available for viewing & collection from Kempsey, Worcestershire

83Milltech Open Ribbon Blade Screw Mixer Conveyor, no electric motor drive 300mm dia. x 3.1m long (ref 46), purchasers will be assisted

with loading and the lot is available for viewing & collection from Kempsey, Worcestershire

84Steel-cased Conditioner, 450mm dia. x 2.1m long, with electric motor (no beaters on shaft) (ref47), purchasers will be assisted with


85Richard Simon 5-25kg BELT FED PACKING WEIGHER, serial no. 21679, CE95, with Richard Simon Computapak 2 control panel (ref.

48), purchasers will be assisted with loading and the lot is available for viewing & collection from Kempsey, Worcestershire

86Heaton Green Dust Control Unit, serial no. 87 1433 2038, 1150mm x 800mm x 2700mm high (ref. 49), purchasers will be assisted with


87Galvanised Steel-cased Auger Conveyor, 150mm dia x 4m long, no electric motor, one discharge outlet (ref 50), purchasers will be

assisted with loading and the lot is available for viewing & collection from Kempsey, Worcestershire

88Guttridge Belt conveyor with load cells Built in 2006. 6 metres long belt width 600mm motor size 3kw, purchasers will be assisted with


89Belt & Bucket Elevator, 4in buckets, approx. 9.5m high, fully galvanised, year of manufacture 08 very good condition (ref 7), purchasers

will be assisted with loading and the lot is available for viewing & collection from Moreton Valence, nr Quedgeley, Gloucestershire

90Belt & Bucket Elevator, 4in buckets, approx. 9.5m high, fully galvanised, year of manufacture 08 very good condition (ref 7), purchasers

will be assisted with loading and the lot is available for viewing & collection from Moreton Valence, nr Quedgeley, Gloucestershire

91Collinson 10t Galvanised Silo/Bins On Legs, 2.7m dia., overall height 6m, good ex-mill condition (ref 10), purchasers will be assisted

with loading and the lot is available for viewing & collection from Moreton Valence, nr Quedgeley, Gloucestershire







96

PRODUCT BIN ON WEIGH CELLS, approx. 5m x 3m x 2.2m deep, c/w all framework and discharge screw to load into tote bins or

bags, approx. capacity 20T, as new condition (ref 29), purchasers will be assisted with loading and the lot is available for viewing &

collection from Moreton Valence, nr Qued ...[more]

97

Amandus Kahl OE30,1 EXPANDER, serial no. 19916, with ABB 200kW electric motor, chopper box, electro hydraulic power pack &

spare parts (ref 24), purchasers will be assisted with loading and the lot is available for viewing & collection from Moreton Valence, nr

Quedgeley, Gloucestershire

98Webster Green IBC-PF-2 BULK BAG FILLING SYSTEM, serial no C151/1, Oct 98, with loadcells on feet (ref52), purchasers will be

assisted with loading and the lot is available for viewing & collection from Moreton Valence, nr Quedgeley, Gloucestershire

99

STAINLESS STEEL CASED CLEATED PLASTIC BELT CONVEYOR, 290 mm wide, 1m long on flat, 3m long on incline, 2.3m on flat,

with geared electric motor (ref 53), purchasers will be assisted with loading and the lot is available for viewing & collection from Moreton

Valence, nr Quedgeley, Gloucestershire

100 Assorted Valves on pallet, purchasers will be assisted with loading and the lot is available for viewing & collection from Bradford

101Derion AL200 Geared Motor Driven Rotary Air Seal, serial no 16669, with hopper, purchasers will be assisted with loading and the lot is

available for viewing & collection from Bradford

102DLM AL2001 Rotary Air Seal, serial no 020113, purchasers will be assisted with loading and the lot is available for viewing & collection

from Bradford

103DLM AL2001 Rotary Air Seal, serial no 020114, purchasers will be assisted with loading and the lot is available for viewing & collection

from Bradford

104 Rotary Air Seal, purchasers will be assisted with loading and the lot is available for viewing & collection from Bradford

105Apex SEL100/ 85/ 200 22/2 Duty 80m3/hr. 16bar 316 Stainless Steel Pump, (unused), with WEG 22kW electric motor on baseplate,

purchasers will be assisted with loading and the lot is available for viewing & collection from Bradford

106Schneider ND75 316L HD58 Stainless Steel Pump, purchasers will be assisted with loading and the lot is available for viewing &

collection from Bradford

107Hilge Flotek HAD-11-60C 316 Stainless Steel Pump, with Brook 15kW electric motor, purchasers will be assisted with loading and the

lot is available for viewing & collection from Bradford

108Electric Motors, as set out on pallet, purchasers will be assisted with loading and the lot is available for viewing & collection from

Lockerbie, Dumfries & Galloway



































126DCE Dalamatic DU72 K3 Dust Filter Unit, serial no. 613105 (ref. S3), purchasers will be assisted with loading and the lot is available for

viewing & collection from Garston, Liverpool

127Entoleter 11-004330-002 CENTRIFUGAL INFESTATION DESTROYER, serial no. 7273, services 27-2, with 50hp electric motor (ref.

S7), purchasers will be assisted with loading and the lot is available for viewing & collection from Garston, Liverpool

128300mm dia. AUGER CONVEYOR, 3.5m long, with 2.2kW electric motor, intake & one discharge outlet (ref. S8), purchasers will be

assisted with loading and the lot is available for viewing & collection from Garston, Liverpool

129300mm dia. AUGER CONVEYOR, 3.9m long, with 3kW electric motor, intake & one discharge outlet (ref. S8A), purchasers will be

assisted with loading and the lot is available for viewing & collection from Garston, Liverpool

130Russell Finex 17480 1.1m dia. STAINLESS STEEL SCREEN, serial no. CB294 (ref. S12), purchasers will be assisted with loading and

the lot is available for viewing & collection from Garston, Liverpool

131Russell Finex 17480 1.1m dia. STAINLESS STEEL SCREEN, serial no. CB276 (ref. S13), purchasers will be assisted with loading and


132PASTA EXTRUDER, with twin stainless steel mixing sections, each 330mm wide x 1540mm long, electric motor drives & four dies(ref.

S15), purchasers will be assisted with loading and the lot is available for viewing & collection from Garston, Liverpool

133Stainless Steel Hopper, 1.7m x 1m x 1.4m deep, with stainless steel supports, (ref. S16), purchasers will be assisted with loading and


134

Saxon PLASTIC SACK HEAT SEALING CONVEYOR, with pneumatic bag posser, GWA gusset reform/ closer, serial no. 033224, year

of manufacture 2003, Fischbein Saxon five radiant sealer, serial no. 66784, 115mm flat belt conveyor, 2.9m centres long & mobile

adjustable height frame (ref. S17), purchasers ...[more]

135

Kek-Gardner H3 PIN MILL, serial no. 72949 3HM 7020, year of manufacture 1992, with Brook CP 15kW electric motor 2940rpm,

personal magnetic separator & base plate (ref. S19), purchasers will be assisted with loading and the lot is available for viewing &


136

Loma Systems STAINLESS STEEL BRIDGE METAL DETECTOR, serial no. 894606, 450mm x 300mm aperture, with flat belt

conveyor, 370mm wide x 1.6m centres long (ref. S20), purchasers will be assisted with loading and the lot is available for viewing &


137400mm x 430mm inlet Rotary Air Seal (ref. S21), purchasers will be assisted with loading and the lot is available for viewing & collection

from Garston, Liverpool

138Adams Ricardo Wade SR0699093 BLOWER, serial no. A4095, with 18.5kW electric motor & acoustic cover (ref. S24), purchasers will

be assisted with loading and the lot is available for viewing & collection from Garston, Liverpool

139Holmes HRII Blower, serial no. 443740192, with 15kW electric motor & acoustic cover (ref. S25), purchasers will be assisted with

loading and the lot is available for viewing & collection from Garston, Liverpool

140Luzenac 1994-01 TOTE BAG EMPTYING STAND, serial no. 94-01, with stainless steel stand, bag support frame & discharge actuator,

purchasers will be assisted with loading and the lot is available for viewing & collection from Garston, Liverpool

141Buhler 835mm x 835mm TEN DECK PLAN SIFTER, serial no. 10003626 (ref. S32), purchasers will be assisted with loading and the lot

is available for viewing & collection from Garston, Liverpool

142Robinson POM 2X9 PLAN SIFTER, serial no. 50 F143 (ref. S30), purchasers will be assisted with loading and the lot is available for

viewing & collection from Garston, Liverpool

143Robinson POM 2X9 PLAN SIFTER, serial no. 51 E144 (S29), purchasers will be assisted with loading and the lot is available for viewing

& collection from Garston, Liverpool

144Robinson PGM 1X6 920mm x 920mm PLAN SIFTER, serial no. D156 (ref. S41), purchasers will be assisted with loading and the lot is

available for viewing & collection from Garston, Liverpool

145Hymo 2000kg Scissor Lift Table, 1.7m x 1m (ref. S33), purchasers will be assisted with loading and the lot is available for viewing &


146Hymo 2000kg Scissor Lift Table, 1.7m x 1m (ref. S34), purchasers will be assisted with loading and the lot is available for viewing &


147Hymo 2000kg Scissor Lift Table, 1.7m x 1.1m (ref. S35), purchasers will be assisted with loading and the lot is available for viewing &


148Wolfking GRANULATOR, with electric motor drive & 1.2m x 670mm feed opening (ref. S44), purchasers will be assisted with loading

and the lot is available for viewing & collection from Garston, Liverpool

14912in dia. Screw Conveyor x 20ft approx., rated at 30 tph on wheat, complete with drive all in working order (ref dh 3936), purchasers will

be assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

150Carier BUCKET ELEVATOR HOD 940/40, 41ft 6ins o/all, complete with 7.5kW drive, all in good working order (ref dh 2027), purchasers

will be assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

151Carier 8/40 CHAIN & FLIGHT CONVEYOR, 29ft, one inlet, three outlets, c/w drive unit, all in working order (ref dh 2027/1), purchasers


152Carier 8/40 CHAIN & FLIGHT CONVEYOR, 86ft approx., one inlet, three outlets, c/w drive unit, all in working order (ref 2027/2),

purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

153Twin Strainer, Pump (AP8) and pipework (ref 5127), purchasers will be assisted with loading and the lot is available for viewing &

collection from Stonehouse, Gloucestershire

1546 in BUCKET ELEVATOR, 22ft approx., c/w drive, all in working order (ref 0440/6), purchasers will be assisted with loading and the lot

is available for viewing & collection from Stonehouse, Gloucestershire

155PADDLE BLADED SCREW CONVEYOR, 12in x 17ft o/all approx., fitted with molasses spray system and drive, all in working order (ref

3974/1), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

156SCREW DISCHARGER, 8in x 7ft approx., c/w drive all in working order (ref 3974/2), purchasers will be assisted with loading and the lot


157SCREW CONVEYOR 10in x 10ft approx., c/w drive (ref 4282), purchasers will be assisted with loading and the lot is available for

viewing & collection from Stonehouse, Gloucestershire

15910in SCREW CONVEYOR, 16ft-6ins o/all, one inlet, one outlet, c/w drive (ref 0440/2), purchasers will be assisted with loading and the

lot is available for viewing & collection from Stonehouse, Gloucestershire

160Bartridge CHAIN & FLIGHT CONVEYOR, 6in x 65ft-6ins long, complete with bend and drive (ref 0440/3), purchasers will be assisted

with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

161BUCKET ELEVATOR, 8in x 23ft o/all, c/w drive (ref 0440/4), purchasers will be assisted with loading and the lot is available for viewing

& collection from Stonehouse, Gloucestershire

162SCREW DISCHARGER 6ins x 6ft o/all (ref 0440/5), purchasers will be assisted with loading and the lot is available for viewing &


163Howe Richardson H17 BAGGING SCALE with hand operated bag spout, all in good working order (ref 0440/7), purchasers will be

assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

164HOWE RICHARDSON H17 BAGGING SCALE, with hand operated bag spout all in good working order (ref 0440/8), purchasers will be


165VIBRATORY SCREEN on outlet (ref 0440/9), purchasers will be assisted with loading and the lot is available for viewing & collection

from Stonehouse, Gloucestershire

166Reed Medway STITCHER & TRACK, on adjustable column, all in good working order (ref 2376 ht), purchasers will be assisted with

loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

167

Torex ROTARY VALVE, type RVR 02301/AOOOX, serial no 177-0202-09-01, circa 2009, complete with inlet adaptor 200mm dia. x 155

high, valve 250 mm o/flanges, stand 360 mm high, c/w drive, direct coupled 0.55kW, blowline 2.5 in nb all in good working order (ref

2375), purchasers will be assisted with l ...[more]

168

Monk Conveyors POWERED & GRAVITY ROLLER TRACK, in unused condition, with 2.1 metre powered 0.75kW motor and 3.5 metre

gravity, rollers 50mm, spaced @ 100mm x 750mm wide, c/w stands 860mm, excellent condition (ref 2324), purchasers will be assisted

with loading and the lot is available for viewing & ...[more]

169Rotex Rotary Actuator, complete with solenoid valve and indicator switches (ref 2318), purchasers will be assisted with loading and the


170Rotex Rotary Actuator complete with solenoid valve and indicator switches (ref 2317), purchasers will be assisted with loading and the


171Rietschle Vacuum Pump Type TR41 D/30,40 M/Cu/Hr @ 1.2 Bar (Ref 2316), purchasers will be assisted with loading and the lot is

available for viewing & collection from Stonehouse, Gloucestershire

172Rietschle Vacuum Pump Type 27 M/Cu/Hr @ 0.7 Bar,0.75kW (Rev 2315), purchasers will be assisted with loading and the lot is


173

TWO PLASTIC TANKS, one at 1.95dia x 2.1 metre high approx. and one 1.5dia x 2.6metre high approx., currently joined together but

would split, 6200 litres and 4500 litres (ref.2313), purchasers will be assisted with loading and the lot is available for viewing & collection

from Stonehouse, Gloucester ...[more]

174Lightning Insertable Mixer, with stainless impeller type L025AK, serial no. 89334-02, compressed air operated (ref 2312), purchasers will

be assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

175

Gericke SACK TIP UNIT, 316 stainless contact parts for dispensing of powders complete, with built in filter and fan. door to tip point and

safety grid, full operator and maintenance manual all in mint condition. serial no.P47284-1 (ref 2311), purchasers will be assisted with

loading and the lot is a ...[more]

176

12in SCREW DISCHARGER with 2.7 metre inlet and further extension of 3.3 metres, complete with drive at inlet end all in good working

order (ref 2301), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

177

12in SCREW DISCHARGER with 2.7 metre inlet and further extension of 3.3 metres, complete with drive at inlet end, all in good

working order (ref 2300), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

178

SCREW DISCHARGER, 200 x 1800 inlet + 2400 extension, c/w drive at inlet end, side mounted geared motor and final chain drive

2.2kW (ref 2293), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

179Bergmann BALER/COMPACTOR in good working order. (ref 2290), purchasers will be assisted with loading and the lot is available for


180AUTOMATIC BAG SPLITTER, complete with trommel screen for separating material from bag parts etc. all in good working order (ref


181

BVC BLOWER/EXHAUSTER complete with 3kW drive, all in working order, fitted with intake filter,76 mm table "d" inlet and outlet

capable of a range of duties from 356 cfm @ 7.9 ins wg to 96 cfm @ 3.4 psi. (ref 2286), purchasers will be assisted with loading and the

lot is available for viewing & colle ...[more]

182

Redler EN MASSE CHAIN & FLIGHT ELEVEYOR, 2132 part galvanised and part stainless construction, circa 2003, serial no 511541,

in excellent condition, approx. 6950 horizontal x 4350 vertical (capacity 60 tonnes per hour on barley) (ref 2284), purchasers will be

assisted with loading and the lot is ava ...[more]

183

TURBULATOR/MIXER FOR PELLET PRESS OR SIMILAR stainless steel contact parts 400 dia x 1500 bep complete with drive needs

cosmetic work (ref 2282), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

184

Guttridge STAINLESS STEEL INTAKE HOPPER WITH DISCHARGE SCREW inclined @ 45 degrees, hopper 1350 sq x 1600 high

could be easily extended. screw 150 x 7 metres long approx. screw stainless steel, serial no 291312 2/06 (ref 2281), purchasers will be

assisted with loading and the lot is available for vi ...[more]

185

Ajax STAINLESS STEEL SCREW FEEDER, ref T1234, 10/97, hopper and screw lagged and heated (not tested), 100 mm screw x 1500

crs inlet to outlet. inlet hopper 400 x 260, outlet 200mm dia. agitator in hopper separate drive (ref 2280), purchasers will be assisted with

loading and the lot is available for ...[more]

186

Ajax STAINLESS STEEL SCREW FEEDER WITH AGITATOR, T7612/B, 1998, 1450 centres inlet to outlet. 0.37kW and 0.75kW drives.

inlet 400 x 260 outlet 200 dia (ref 2279), purchasers will be assisted with loading and the lot is available for viewing & collection from

Stonehouse, Gloucestershire

187

Ajax STAINLESS STEEL SCREW FEEDER, ref T1234, 10/97, hopper and screw lagged and heated (not tested) 100 mm screw x 1500

crs inlet to outlet. inlet hopper 400 x 260, outlet 200mm dia. agitator in hopper separate drive (ref 2277), purchasers will be assisted with

loading and the lot is available for ...[more]

188ROTARY SIFTER in stainless steel contact parts, basket size 180 dia x 600 long, with spare screen, machine of German manufacture

(ref 2276), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

189Small Stainless Steel Hopper Fitted with Fluidisation. 450 dia x 200 dia x 300 high in good order (ref 2275), purchasers will be assisted


190Spring Loaded Balancer 2-4 kg suspension weight (ref 2274), purchasers will be assisted with loading and the lot is available for viewing


191Airmaster 15M FREE STANDING FILTER c/w fan + shaker motor, new door, new filters and refurbished casing. rear explosion door (ref


192

Denios STEELDRUM LIFTER, model FW-16-F, painted with hydraulic foot pump, suitable for turning, lifting and regulated emptying of

steel and plastic drums, ideal for 60-200 litre drums, max capacity 300 kg, 0-1400 mm lifting height, good condition. circa 2007 (ref

2272), purchasers will be assisted w ...[more]

193Hand Operated Valve, stainless steel contact parts 8in diameter in good order (ref 2271), purchasers will be assisted with loading and

the lot is available for viewing & collection from Stonehouse, Gloucestershire

194Entecon LUMP BREAKER with stainless steel contact parts, 200 diameter inlet could be enlarged, c/w drive all in good working order


195

AT Sackfillers SIMPLAFIL SCREW PACKER type 1000 auger force, load cell controlled last checked 24/4/12, 40 kg x 0.5, serial no

auger 21/23/1, circa 2006 c/w clamp type bag holder. filling rate average 4/min @25 kg. stainless contact parts (ref 2266), purchasers

will be assisted with loading and the ...[more]

196Safeline INLINE METAL DETECTOR complete with automatic rejection chute. aperture size 120mm serial no 35714 (ref 2265),


197

Guttridge BELT CONVEYOR, 500 mm x 21 metres o/all, totally enclosed with galvanised casings, lagged drive drum and good belt.

serial no 0555231-1-2, very good condition. (ref 2263), purchasers will be assisted with loading and the lot is available for viewing &

collection from Stonehouse, Gloucester ...[more]

198Nilfisk INDUSTRIAL VACUUM CLEANER, type GB833, complete with 3kW flameproof motor in working order (ref 2260), purchasers


199Nilfisk INDUSTRIAL VACUUM CLEANER, type GB833, complete with 3kW flameproof motor in working order (ref 2259), purchasers


200

Micropul STAINLESS STEEL HAMMER MILL, type 1H, serial no 65 JB44, in working order, c/w 5.5kW motor and 1.5kW feeder, drive

mounted on stand, with collection hopper and feed hopper (ref 2257), purchasers will be assisted with loading and the lot is available for

viewing & collection from Stonehouse ...[more]

201

Kongskilde SUCKER/BLOWER type SUC-E electric powered 22kW, 160 dia pipework, all in working order, c/w starter on three wheel

chassis (ref 2255), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

202Carter DISC SEPERATOR, no.8101523203, complete with 27 discs, needs motor (vendor could supply at extra cost if required) (ref


203

Hick Hargreaves BLOWER SET IN ACOUSTIC HOOD excellent condition, blower 9332, with 22kW drive motor, belt drive guard etc.,

serial no 3u016932 (ref 2245), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

204

Buhler TUBULAR SCREW CONVEYOR/ELEVATOR 200 mm dia x 5000 mm long end outlet c/w drive geared motor + chain drive all in

good working order (ref 2244), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

205

Buhler TUBULAR SCREW CONVEYOR/ELEVATOR 250 mm dia x 1600 mm long, end outlet, c/w drive geared motor + chain drive, all

in good working order (ref 2240), purchasers will be assisted with loading and the lot is available for viewing & collection from


206Blower Attached to Diesel Engine in as seen condition, not tested (ref 2238), purchasers will be assisted with loading and the lot is


207Aerzen TYPE GM148 BLOWER SET with 37kW drive (ref 2237), purchasers will be assisted with loading and the lot is available for


208Robinson 11x6 PGM MINISIFTER in working order complete with drive (ref 2236), purchasers will be assisted with loading and the lot is


209Robinson 11x6 PGM MINISIFTER in working order complete with drive (ref 2235), purchasers will be assisted with loading and the lot is


210Four Electro Pneumatic Slide Valves, aperture size 300 x 490 c/w fittings (ref 2220), purchasers will be assisted with loading and the lot


210ARotaval BLOWLINE DIVERTER VALVE, epo operated 125 mm size. fdp125. serial no.0097903 (ref 2179) purchasers will be assisted


211Four Electro Pneumatic Slide Valves, aperture size 300 x 490 c/w fittings (ref 2220), purchasers will be assisted with loading and the lot


211AChristy & Norris B11 HAMMER MILL on gravity base complete with motor (ref 2142), purchasers will be assisted with loading and the lot


212Two Electro Pneumatic Slide Valves, aperture size 300 x 490 c/w fittings (ref 2220), purchasers will be assisted with loading and the lot


212AIndustrial Spin Dryer, three phase motor (Ref 2139), purchasers will be assisted with loading and the lot is available for viewing &


213Hand Operated Mild Steel Flap Valve, inlet 310 sq, outlets 310 x 230, overall height 570, tray type (yellow) (ref 2214), purchasers will be


213AHand Operated Bench Mounted Fly Press in working order (ref 2137), purchasers will be assisted with loading and the lot is available for


214

APPROX 32 CU/METRE CAPACITY SKIRTED SILO, 2.8 metres diameter x 8150 o/all, barrel 5334 height, 1640 below outlet flange

with ladder etc, all in good condition (ref 2208), purchasers will be assisted with loading and the lot is available for viewing & collection


214ATWIN SCREW DISCHARGER 10in x 9ft 6in o/all, inlet 7ft x 2ft approx., complete with drive in good order (ref 2133), purchasers will be


215Airmaster RJF Insertable Dust Filter with tubular filters 32 off, 127 mm dia x 1 metre long, no fan, (ref 2202), purchasers will be assisted


215A16in Dia SCREW CONVEYOR with flexible trough (rubber) x 5 metres bep complete with drive (ref 2132), purchasers will be assisted


216Airmaster Type RJX Insertable Dust Filter fitted with thirty tubular socks 127 dia x 1 metre long and fan 0.75kW library photo (ref 2201),


216AUnion Special Stitching Head (ref 2121), purchasers will be assisted with loading and the lot is available for viewing & collection from


217Piset 3SG Motorised Pipe Threader with some dies, 110 volt 220 single phase, in working order (ref 2199), purchasers will be assisted




218Geared Electric Motor Unit 11kW, output speed 37.7 rpm, Helicon mark 4 GHT 70 in working order (ref 2189), purchasers will be




219SHORT BELT CONVEYOR/ FEEDER 500 mm wide belt x 1200 centres approx., complete with direct coupled geared motor 0.75kW


219ARUBBLE SEPERATOR SCREEN BY BRICE BAKER BB 20/60 5059, rotary screen type 4ft wide x 5ft 9in high x 7ft 9in long (ref 2120),


220SCREW BIN DISCHARGER, 12in, inlet 2700 mm long and 3000mm extension, c/w drive (ref 2110), purchasers will be assisted with


221SCREW TYPE BIN DISCHARGER, 12in size, inlet 2 metres + 1440 extension, one outlet and drive, all in good condition (ref 2101),






















232

Minipak SEMI AUTOMATIC BATCH WEIGHING/ PACKING MACHINE, weight range 3kg up to 15 batches / min depending on

operator. consists of small receiving hopper, vibratory feeder with fast and trickle feed control, in-flight compensation, bench top

mounting all in good working order (ref 2074), purchasers ...[more]

233Aylesbury Automation Parts Bowl Feeder, with stainless steel contact parts, 360 mm diameter x 300 high, with VS controllers (ref 2005),


234Aylesbury Automation Parts Bowl Feeder, with stainless steel contact parts, 360 mm diameter x 300 high, with vs controllers (ref 2005),


235Aylesbury Automation Parts Bowl Feeder, with stainless steel contact parts, 360 mm diameter x 300 high, with VS controllers (ref 2005),


236Aylesbury Automation Parts Bowl Feeder, with stainless steel contact parts, 360 mm diameter x 300 high, with vs controllers (ref 2005),


237Guttridge Screw Conveyor, 16in x 1371mm long, complete with drive, underslung inlet end 3kW, good condition (ref 2004), purchasers


238

Accrafil TWIN HEAD PACKING MACHINE, valve sacks could be adapted to open mouth, serviceable but cosmetically rough requires

weights (ref 2000), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

239

MIXER/CONDITIONER IN STAINLESS STEEL used above extruder circa 2003, all in good condition and complete with 11kW drive,

300 mm diameter x 2000 long, additional ports for steam/liquids (ref 1981), purchasers will be assisted with loading and the lot is

available for viewing & collection from Stoneho ...[more]

240CFM TYPE 3051 VACUUM UNIT 0.37kW 28r 78 50 cycles, 240-415 volt, 3ph, 1995, ref 1946, purchasers will be assisted with loading

and the lot is available for viewing & collection from Stonehouse, Gloucestershire

241Simplex TWIN BUCKET ELEVATOR, two elevating legs, 5in buckets x 23ft o/all height, c/w drive 1.5kW, all in working order (ref 1912),


242Rotoplex 3 HEATSEALER on adjustable stand, complete with conveyor (ref 1910), purchasers will be assisted with loading and the lot is


243Jigs & Recipes For Producing Replacement Stones For "Barron" Dreadnought Stone Grinders (Ref 1896), purchasers will be assisted


244SMALL FLOUR SCREEN / SIFTER. (ref 1888), purchasers will be assisted with loading and the lot is available for viewing & collection


245

Vebe Teknik BAG TIP STATION complete with take away screw conveyor and screw type bag compactor, all manufactured in stainless

steel, in very good working order (ref 1885), purchasers will be assisted with loading and the lot is available for viewing & collection from


246

Peabody Holmes HR80 BLOWER PACKAGE, serial no3100940, data sheet no32, complete with 30kW motor, all in good working order,

cleaned and tested (ref 1810), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse,

Gloucestershire

247STEAMILIZER" IN STAINLESS STEEL, for conditioning cereals prior to rolling in good condition requires steam supply (ref 1779),


248Richard Simon AUTOMATIC WEIGHING MACHINE complete with belt feeder, and bag spout (ref 1774), purchasers will be assisted


249

Wallace & Tiernan VOLUMETRIC FEEDER SCREW TYPE FEEDER, with single discharge 100 mm and variable speed control, mild

steel construction, in good working order, type BA071041/106705B, 240volt (ref 1715), purchasers will be assisted with loading and the

lot is available for viewing & collection from S ...[more]

250Carier TWIN BUCKET ELEVATOR, painted finish, 2 x 9in x 28ft approx. o/all height, complete with drive, all in good condition (ref


251

THROUGHPUT WEIGHER LOAD CELL AND "IAN FELLOWS" CONTROLLER, machine belt fed with pneumatic discharge gate, all

fully automatic, little used, capacity approx. 12 tph on pellets (ref 1619), purchasers will be assisted with loading and the lot is available

for viewing & collection from Stonehouse, Glou ...[more]

252One Roll Unused Elevator Belting, approx. 46 metres long x 200mm wide, punched 2 holes 108 centres 228 pitch (ref 1559), purchasers


253One Roll Unused Elevator Belting, approx. 46 metres long x 200mm wide, punched 2 holes 108 centres 228 pitch (ref 1559), purchasers


254Three Way Valve Electro-Pneumatic Operation, three inlets 150 diameter and three outlets 150 diameter discharge from locker screen


255

DRUM TIPPER FRAME, to take 25 litre drums, suitable for use with hoist, adjustable drum clamp and hand operated drum tipping

device, to control drum through 180 degree inversion all in stainless steel, (ref 1379), purchasers will be assisted with loading and the lot

is available for viewing & collec ...[more]

256Approx. 25 Metre Length of 5-Ply Bucket Elevator Belting x 430mm width, suitable for 16" bucket elevator. unused and unpunched (ref


257

Aluminium Square Bin, 900mm x 900mm x 700 deep, plus 250mm coned to a flat bottom, on wheels and fitted with a hinged lid, 50mm

diameter tube outlet for suction discharge, very good condition (ref 1265), purchasers will be assisted with loading and the lot is

available for viewing & collection from ...[more]

258

Large Mild Steel Conditioner For Press, in poor condition, but can be refurbished on order, was used as a molasses applicator, price "as

is" but with unused rotor (ref 1213), purchasers will be assisted with loading and the lot is available for viewing & collection from


259Chronos GROSS WEIGHER (h17 principle) in excellent order, clearly fairly new, very good value, currently configured for valve packing,


260Bergmann TYPE PS 8100 SCH COMPACTOR, 1988, refurbished to high standard, works and looks well, machine no 102330 2054 /

88, (ref 897), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

261Bergmann TYPE PS 8100 AH COMPACTOR, nett weight 750kg, excellent working order and condition, (ref 896), purchasers will be


262

Rotoval 80 F.V.P.FILL VENT VALVE, unused condition, body c.i.flaps.s.s. with polyurethane seal, double acting cylinder with 5 port

solenoid valve 110 volt limit switches (ref 415), purchasers will be assisted with loading and the lot is available for viewing & collection

from Stonehouse, Gloucester ...[more]

263Three Four Drawer Steel Filing Cabinets (ref dh574), purchasers will be assisted with loading and the lot is available for viewing &


264Four L-Shaped Office Desks all in good order (ref dh 574a), purchasers will be assisted with loading and the lot is available for viewing


265

Rexnord planet gear speed reducer, 265.4 ratio, 205 - 2187 input speed, final output speed 0.77 to 8.24rpm, size mars, serial no. 27415

1A, serviceable power 0.55hp, service factor 1.28. (ref ht886), purchasers will be assisted with loading and the lot is available for

viewing & collection from ...[more]

266

TOTE BIN STATION, c/w 1270mm tall (400mm on straight, 670 on cone) x 1220 square body bin, fitted with hinge top door, 250mm

outlet, controlled by custom built discharge station, double screw discharger (ref 1078), purchasers will be assisted with loading and the

lot is available for viewing & colle ...[more]

267Quantity of Spare Rolls & Spares (suitable for the above roller mills) (ref. K6A), purchasers will be assisted with loading and the lot is

available for viewing & collection from Lockerbie, Dumfries & Galloway

271Buhler TUBULAR SCREW MNSG 160 x 2150mm serial no 024645,1994, c/w geared motor drive 3kW, all in good working order (2389),


272Buhler TUBULAR SCREW CONVEYOR 200mm x 2.8m approx. o/all, needs drive which can be provided at extra cost (2387),


273

Redler CHAIN & FLIGHT TUBULAR ELEVATOR 200mm x base length 1800mm, vertical height to outlet 2900mm, all in good order but

requires motor which can be supplied at extra cost (2386), purchasers will be assisted with loading and the lot is available for viewing &

collection from Stonehouse, Gloucester ...[more]

274

AS NEW POWERED/GRAVITY ROLLER TRACK, rollers 50mm x 450mm wide @ 100mm pitch supports aluminium extrusions and

legs, approx. 20 metres available (2383), purchasers will be assisted with loading and the lot is available for viewing & collection from


27518in Wide Tray Type Vibratory Feeder complete with controller, all in good working order (2377), purchasers will be assisted with


276

Hapman" CHAIN & DISC ELEVATOR (manufacturer not known) unused exhibition unit, stainless steel with nylon flights 100mm x 2.5

metre centres fitted gearbox but no motor (2373), purchasers will be assisted with loading and the lot is available for viewing & collection


277Two Galvanised Hand Operated Slide Valves run on nylon rollers, two available aperture size 600 x 400 (2372), purchasers will be


278Turner 8 x 4 DOUBLE DECK SCREEN fully refurbished and in good working order, screen supplied to requirements (2360), purchasers


279PADDLE BLADED SCREW CONVEYOR 12in x 17ft o/all approx., fitted with molasses spray system and drive, all in working order

(2342), purchasers will be assisted with loading and the lot is available for viewing & collection from Stonehouse, Gloucestershire

280

Monk Conveyors POWERED AND GRAVITY ROLLER TRACK, in unused condition with 2.1 metre powered 0.75kW motor and 3.5

metre gravity, rollers 50mm spaced @ 100mm x 750 mm wide c/w stands 860mm excellent condition (2324), purchasers will be

assisted with loading and the lot is available for viewing & colle ...[more]

281Galvanised Trough Auger,2 Motorised Slides,6 Inch Screw,26 Foot Long,15kW Motor, purchasers will be assisted with loading and the

lot is available for viewing & collection from York

282Galvanised Auger 27 Foot Long.8 Inch Screw,15kW Double Chain Drive.40tph, purchasers will be assisted with loading and the lot is

available for viewing & collection from York

283

Triple tapered screw discharger with 3 x 250 mm diameter screws and a flanged inlet 2030 mm x 813 mm. It has an overall length of 2.9

metres and a 5.5kW two speed drive Ex ranks mill. With hopper, purchasers will be assisted with loading and the lot is available for

viewing & collection from York

284




285




286




287




288




289

Stainless Steel Screw Conveyor, weighs 2 tons, 7.5m long, 8.65m total length, 430mm dia. screw, 480x500 u .5.5 kW motor.25.1 ratio

gearbox with auto lube, bought to be used to move sludge but was never used, purchasers will be assisted with loading and the lot is

available for viewing & collection f ...[more]

290Turner NO 8 CLEANER, 40tph, with selection of screens, purchasers will be assisted with loading and the lot is available for viewing &

collection from York

291Turner NO. 8 CLEANER with spare screens, later type top aspiration, purchasers will be assisted with loading and the lot is available for


292

Chain & Flight Conveyor with 400mm wide x 380mm deep painted case, 15.0 metres long and 5.5 kW drive. The conveyor has two

chains with 50 mm x 50 mm wooden slats fixed across the chains at 210 mm pitch. Output could be up to 100tph on grain. This

conveyor has been overhauled and is in good working o ...[more]

293Neuero BLOWER, 7.5 kW, 2003, very little use, purchasers will be assisted with loading and the lot is available for viewing & collection

from York

294

Hosokawa Schugimix Model 400 Continuous Mixer/ Agglomerator, high intensity instant mixing of powders, liquid addition for

agglomeration, 55 kW vee-belt drive arrangement. purchasers will be assisted with loading and the lot is available for viewing &

collection from Peak Forest, Nr Buxton

295

Hosokawa Model 16-FD-48 Vrieco Finisher, dis-agglomeration (de-lumping) of powders, stainless steel construction, serial No.

6879901000 Year: 2003, purchasers will be assisted with loading and the lot is available for viewing & collection from Peak Forest, Nr

Buxton

296Gardner Continuous mixer for powders and grits, 400 mm dia x 2800 mm long (2500 mm ctrs), Stainless Steel construction, purchasers

will be assisted with loading and the lot is available for viewing & collection from Peak Forest, Nr Buxton

297Verderflex VF 25 Pump, peristaltic hose pump for liquids and slurries, rated for flow rate of up to 2100 litre/hour and maximum discharge

pressure of 16 bar, purchasers will be assisted with loading and the lot is available for viewing & collection from Peak Forest, Nr Buxton

298Perry Angleveyor for grain rated at 10t/hr, 5m vertical then 6m at 45degrees, purchasers will be assisted with loading and the lot is

available for viewing & collection from Hungerford, Berkshire

299Carier Conveyor 30t/hr, 5 pneumatic outlets, 25m long purchasers will be assisted with loading and the lot is available for viewing &

collection from Hungerford, Berkshire

300Kek Major cylindrical sifter with motor basket and nylon sieve purchasers will be assisted with loading and the lot is available for viewing

& collection from Hungerford, Berkshire





303Pneumatic fan, 1200cfm at 28in wg. 12.5 kw motor purchasers will be assisted with loading and the lot is available for viewing &


304Fan, 17kw, radial impeller, 2000cfm 28in, purchasers will be assisted with loading and the lot is available for viewing & collection from

Hungerford, Berkshire

305Entoleter plus spare motor and body, purchasers will be assisted with loading and the lot is available for viewing & collection from

Hungerford, Berkshire

306Le Coq sifter, complete with motor and sieve cage, purchasers will be assisted with loading and the lot is available for viewing &


307Transfer hopper/ blow seal, purchasers will be assisted with loading and the lot is available for viewing & collection from Hungerford,

Berkshire

308

Redler 250 mm eleveyor with D shaped flights. This unit has a 10.0 metre long horizontal section, a bend and a 4.0 metre inclined

section giving a 2.5 metre discharge height , purchasers will be assisted with loading and the lot is available for viewing & collection from

Lincoln (item 1)

309Stainless steel single barrel conditioner 300 mm diameter x 3.13 metres long with drive and 3 No access doors, purchasers will be

assisted with loading and the lot is available for viewing & collection from Lincoln (item 2)

310

1000 litre stainless steel ribbon blade mixer with purpose made mild steel hot water jacket on the case only. The mixer body is 2.36

metreslong and the ribbon is 740 mm diameter. The mixer has no top cover and it is 4.2 metres long overall including the 15kw in-line

geared drive , purchasers will be ...[more]

311

Schmidt nominal 1.5 to 2.0 tonne 3 tier mixer with bomb door discharge on the top hopper and mixer. The under hopper has a reversing

screw discharge conveyor and the top hopper has a levelling screw across the top. The ribbon mixer section has a 15kw geared drive

unit and a working volume of about 3 ...[more]

312

Matador stainless steel pellet press conditioner with mild steel shaft, two access doors, steam inlets and drive but no drive guard, belts

or pulleys. The conditioner is 600 mm diameter x 2.5 metres long, purchasers will be assisted with loading and the lot is available for

viewing & collection ...[more]

313Cimbria Moduflex bulk loading bellows model S300F/10 built in 2000 , purchasers will be assisted with loading and the lot is available for

viewing & collection from Lincoln

314Cimbria Moduflex bulk loading bellows model S300F/10 built in 2000, purchasers will be assisted with loading and the lot is available for


315Cimbria Moduflex bulk loading bellows model S300F/10 built in 2000, purchasers will be assisted with loading and the lot is available for


316

Walthambury WJM 3218 bag weighing machine built 2002. This is a belt fed gross bag weigher with pneumatic bag clamp, bag aligner,

Newlong stitcher and bag conveyor. Rated at up to 5 bpm. Included with the weigher is a nominal 4 cubic metre bunker/hopper which

has a levelling screw in the top and a f ...[more]

317

Complete bagging line to operate at up to 600 bags per hour. The line comprises a belt fed Richard Simon EPG mechanical net bag

weigher to weigh from 15 - 50kg. The weigher has a birds beak bag clamp to work with a Richard Simon Mk3 automatic bag placer with

manual bag magazine. The bag placer will ...[more]

318

Kahl OE30.1 SHORT BARRELLED EXPANDER , machine no 19 447, with Brook Crompton 185kW electric motor, cake breaker with

two x 5.5kW electric motors, hydraulic power pack, expander auxiliary control panel, Datastor Allen Bradley control panel, Matador

Stainless Steel Conditioner, 3m x 600mm dia, ...[more]

319One Pallet of assorted Air cylinders, purchasers will be assisted with loading and the lot is available for viewing & collection from

Shepshed, Leicestershire

320One Pallet of assorted Air cylinders, purchasers will be assisted with loading and the lot is available for viewing & collection from

Shepshed, Leicestershire

321Buhler Roller Mill serial no 10052059 (understood to be double diagonal with fluted rolls) , purchasers will be assisted with loading and

the lot is available for viewing & collection from Shepshed, Leicestershire

322Buhler Roller Mill serial no 10052063 (understood to be double diagonal with fluted rolls) , purchasers will be assisted with loading and

the lot is available for viewing & collection from Shepshed, Leicestershire

323

Two Stainless Steel Potatoe Hoppers, each 31in x 31in x 32 in deep, with pneumatic cylinder operated bomb door discharge, loadcells

and digital read out, purchasers will be assisted with loading and the lot is available for viewing & collection from Lockerbie, Dumfries &

Galloway

324

Four Stainless Steel Tanks each 22in x 22in x 32in deep, each fitted mixer/ agitator, with stainless steel frame, outlets and hinged

removable lid, purchasers will be assisted with loading and the lot is available for viewing & collection from Lockerbie, Dumfries &

Galloway

3252 T Electric Hoist with Pelloby Beam, purchasers will be assisted with loading and the lot is available for viewing & collection from


326Barrel truck, purchasers will be assisted with loading and the lot is available for viewing & collection from Lockerbie, Dumfries &

Galloway

327Vertical Welded Steel Air Receiver, 210 litres, purchasers will be assisted with loading and the lot is available for viewing & collection

from Lockerbie, Dumfries & Galloway

328Stainless Steel Mixing Vessel, steel jacketed, 36in dia x 32in deep, with mixer/ agitator,purchasers will be assisted with loading and the

lot is available for viewing & collection from Lockerbie, Dumfries & Galloway

329Corken Gas Compressor purchasers will be assisted with loading and the lot is available for viewing & collection from Lockerbie,

Dumfries & Galloway

330Corken & Blackmear Gas Compressors, purchasers will be assisted with loading and the lot is available for viewing & collection from


331Qty 56 Meca.Inox 2GTV075SK4 Stainless Steel Flow Control Actuators purchasers will be assisted with loading and the lot is available

for viewing & collection from Lockerbie, Dumfries & Galloway

332Qty 76 MCF MSR80F05 Stainless Steel Control Valves, purchasers will be assisted with loading and the lot is available for viewing &

collection from Lockerbie, Dumfries & Galloway

333Qty 5 Meca.Inox 2GTW0639K4 Stainless Steel Flow Actuators, purchasers will be assisted with loading and the lot is available for

viewing & collection from Lockerbie, Dumfries & Galloway

334Qty Four Rosemount Stainless Steel Flow Control Valves, purchasers will be assisted with loading and the lot is available for viewing &

collection from Lockerbie, Dumfries & Galloway

335Qty Haskel 29723-2 Air Pumps, purchasers will be assisted with loading and the lot is available for viewing & collection from Lockerbie,

Dumfries & Galloway

336Stainless Steel Pressure Relief Valves in box, purchasers will be assisted with loading and the lot is available for viewing & collection

from Lockerbie, Dumfries & Galloway

337Pressure Gauges in box, purchasers will be assisted with loading and the lot is available for viewing & collection from Lockerbie,

Dumfries & Galloway

338Stainless Steel Lever Valves in box, purchasers will be assisted with loading and the lot is available for viewing & collection from


Sanderson Weatherall - Bidspotter

Documents

Transcript of Sanderson Weatherall - Bidspotter