SALES INFO Jekko Mini Crane SPX532€¦ · to its weight, dimensions and stabilization area...
Transcript of SALES INFO Jekko Mini Crane SPX532€¦ · to its weight, dimensions and stabilization area...
SALES INFO
Rev.00
Jekko Mini CraneSPX532
2
SPX532
High lifting capacity in relation to its weight, dimensions and
stabilization area
Possibility of working either with hook or winch, both with the main boom
and with jib
Maximum lifting capacity of 3.2 t
Cutting-edge stabilisation system with 1250 possible
configuration
Maximum working height of 17.2 m with jib
Reduced weight < 2.8 t
Innovative 48 V lithium-battery supply for greater performance
New design and attention to detail
The highest performance single door crane on the market
SPX532CL2
SPX5
32
Kg
2350
200
200
158
50
70
20
1845 x 835 x 1360 mm
Pos. 1 3800 x 3800 mm
Pos. 2 4400 x 4400 mm
SPX532CL
/
1,95 km/h
20° (36%)
3
1960
18°
23°
3255
3800 3800770
0° / 80°
360° / 1 rpm
2.5 - 10.8 m 35 sec.
Pos. 1
Pos. 2
20 sec.
TECHNICAL FEATURESD
imen
sion
s
Rotation
Working angle
Main boom extension
Hydraulic Jib
Manual Ext.Pulle Head
Runner Jib
Winch
Pulley Block
Spee
dSl
ope
Lithium Battery
1 battery48 V200 Ah
Cran
e &
Acc
esso
ries
Wei
ght
SPX532
4
Rmax:9,7m
2,6 m
3,8 m
4,8 m
5,8 m
6,8 m
7,8 m
8,8 m
9,8 m10,5 m
Hmax:12,1 m
10°
20°
30°
40°
50°
60°
70°80°
m0
1
2
3
4
5
6
7
8
9
10
11
90 1 2 3 4 5 6 7 8
12
13
14
10 11
m90 1 2 3 4 5 6 7 8 10 11
15
16
17
12 13 14 15
1312 14 1518
10,5m + 4,4 m
10,5m + 3,1 m
10,5m + 1,8 m
10,5m + 4,4 m + 0,7 m
16
16Hmax:17,3m
Rmax:14,8m
0°
10°
20°
30°
40°
50°
60°
70°
80°
50053065080011001500225026003200
520800 640
640800
10401150
15501950
23002650
2400
23002090
2100
1730
1650
12701170
10309601180
12601450
15501410
13001000 900
930 8001120
13501530
1730
18801700
32002600
230017501300
1100
890
490
480
390
300
290
380 280
440
380
290
230
230 190 150 130 100
250
1000
530
420 320620
490400
480 330350
410
LOAD CHART
MAI
N B
OOM
+
HYDR
AULI
C JIB
5
TECHNICAL SOLUTIONSSPX532 marks a sea change between the old and new design system
DOUBLE WORKING MODE
NEW HYDRAULIC SYSTEM
The first Jekko mini crane which allows to work with either hook or winch with the main boom
» The winch is optional and is installed under the main boom, which in this way takes up a minimal amount of space.» Pick & carry capacity of 400 kg. Thanks to the new digital electro-hydraulic
Danfoss distributor, the machine smartly and autonomously regulates oil pressure and flow rate
according to movement, load and movement’s speed. versatility increases, combining truck cranes’ lifting speed (hook mode) with mobile cranes’ precision (winch mode). Double work mode with the same lifting capacity!
- up to three movements at the same time without losing performance- smooth and precise movements- the ideal working modality based on site requirements can be selected directly by the radio remote control
Advantages:
Advantages:
6
1,1 m 1,8 m 2,2m
CRA
NE
PER
FOR
MA
NCE
J7
J6
J5
J4
J3
J2
J1 PICK & CARRY
J0 NO LIFTING CAPACITY
2,2 x 2,2 m 3,6 x 3,6 m 4,4 x 4,4 m
STABILITY AREA
30°
60°
45°
0°
TECHNICAL SOLUTIONSA TOTALLY NEW STABILISATION SYSYEM
» 5 different positions of the outriggers (0°-15°-46°-62°-90°)
» Double outriggers’ articulation with fast unhook for opening and rest position with magnet.
» 1250 possible configurations!
» 4 possible working areas, which are indentified by as many colours and are
intuitively displayed on the remote control’s screen.
» The software can detect in real time the different working areas based on the
outriggers positions.
Automatic levelling: in case of uneven terrain the crane can automatically level out to operate in complete safety,
it is not necessary to manually regulate each outrigger anymore! �
Advantage: the machine can work in conditions that would have never been possible before
Stability example
7
TECHNICAL SOLUTIONSHYDRAULIC JIBNew rest position under the main boom, less bulky and faster to be installed and removed.
» Possibility of storing the jib in three ways: on the column, on the ground or under the main boom.
» Thanks to a double pump, the jib also allows for simultaneous use of both the extension and angle functions, enhancing precision and operating speed.
Advantage: the first two storing solutions allow the operator to work with the main boom - the last one with the jib installed, not having to put it to rest until the work is finished.
⏱ Estimated time of installation: 3 minutes!
EVERYTHING ON BOARD THE MACHINE
The machine is provided with rest positions for all accessories
(pulley blocks, mats, hooks, runner jib).
Advantage: all accessories are at hand for the operator
Plug&Play Attachment
0% 50% 100%
0% 50% 100%
123° 1.23m
1.23m
0.0° 0.0°1.23m Weight: 123 kg
SWL: 123 kgLoad Chart: C0-J7
Lifting with: Hook12°
0% 50% 100%
I: 1 F: 0S: 7
I: 2 F: 1S: 3
23456789
10
321 1 0 Engine ECU disconnected P.0 ID FMI SPN DESCRIPTION
0% 50% 100%
Load Chart: C0-J7Braccio: 202.5°Area A: 315° - 35°Area B: 315° - 225°Area C: 225° - 125°Area D: 125° - 35°
J6
J7 J5
2.2m45°
2.2m45°
2.2m20°
2.2m35°
A
J7
J7
J6
B
C
DJ5
8
TECHNICAL SOLUTIONSREMOTE RADIO CONTROLNew multi-function remote radio control developed by Jekko with LCD display, which allows to directly control all crane’s movements and functions.
» The radio remote control is designed to be user friendly and has intuitive screens: working areas and crane’s general parameters are easy to read on the display.
» Using radio’s selectors it is possible to set boom and winch speed, to select the configuration of the crane (pick & carry, crane, outrigger up/down, tracks), to control the manipulator (included activation and discharge of vacuum pump).
» In case of wrong use or malfunction of the machine, a text code with fault description on screen of the error appears directly on the display.
Advantage: the possibility of viewing data such as maximum height, maximum capacity, lifted load and so on, allows the
operator not only to have the total control on the crane’s limits, but also to run simulations before the intervention, in order to be
completely sure about its success.
9
TECHNICAL SOLUTIONSRADIO REMOTE CONTROL8-lever multifunction radio remote control by Jekko. The lever function changes according to the selected working mode.
Work modeselection
Display navigation
Rope/hook pullchange
Engine modeselection
Engine power on/off
Emergencybutton
Manipulator loadcoupling
Manipulatorload uncoupling
Mode speedreduction
Crane speedreduction
Headlight on
Horn / enabling /ignition
Radio on
JP button
Programmingconnector
Connectorfor cable
Function change
Aux 2
Perf
orm
ance
3.2 Km
5 h
Yes
10
TECHNICAL SOLUTIONSLITHIUM BATTERIESThe crane features a 7 kW engine developed following Jekko’s specifications and powered by 48V lithium battery.
Advantages - possibility of working indoor silently and without any kind of emission- unchanged and constant performance even in case of intense use with heavy loads- long battery life
Time
DISTANCE COVERED WITH A CHARGE
FULL CHARGE CYCLE
WORK UNDER CHARGE
Lithium battery Standard battery
😎11
TECHNICAL SOLUTIONSUSER FRIENDLY AND CUSTOMISABLE
FOR THE EXPERIENCED OPERATOR
SPX532 is designed to be easy to use and features many automatic functions:
» Automatic stabilisation » Dynamic movement speeds based on the lifted load » LCD display as graphic interface between operator and crane
Many customisation options are available for the operator:
» Thanks to the active dynamic control, the operator can set the speed of every single movement independently one to another.
EXTENDABLE TRACKSMost manufactures adopt the
extendable tracks solution to widen the base of the machine for a greater
stability and an easier steering. For SPX532 another solution has been adopted:
it is possible to extend the tracks, therefore enhancing stability, raising the crane at the same time.
» Tracks extend/retract at an angle of 45° with independent
cylinders allows the machine to compensate potential slope or unevenness of the terrain.
12
SAFETY SYSTEMS
STANDARD EN 13000
GEOMETRICAL AND ELECTRONIC LMI
EMERGENCY PUSH BUTTON
VIRTUAL WALLS(UNDER DEVELOPMENT)
SPX532 complies with EN 13000 standard.
The geometrical and electronic LMI allows to optimise machine payload at best, managing the working areas and significantly increasing safety.
Emergency push button located on the dashboard and on the radio remote control.
A system to limit the working area of the crane when required by jobsites.
13
JIB1000.2H1MX W800.6
JIB1200GX WUK-02.1
EXT-312-424/429
HA-SPX532VAI
WT-429-532
VISUAL ANGLEINDICATOR
TK-JIB1000 J-CON
OM400.1
PC01, PC11
VISUAL ANGLEINDICATOR
ACCESSORIES
HYDRAULIC JIB 800 kg WINCH
400 VBATTERY CHARGER
RUNNER JIB WINTER KIT
EXTENDABLE TRACKS
HYDRAULIC ACTIVATION OF
ACCESORIES
LOW MARKING WHITE TRACKS
TROLLEY FOR HYDRAULIC JIB J-CONNECT
OUTRIGGERSMATS AND TRAY
PERSONALISED COLOUR
14
STANDARD PC01 PC11
RAL2004 RAL____ RAL____
RAL7021 RAL7021 RAL____
BC3-220V60A
BC3-110V60AJ-CONJ-CON-Y23YW-532
J-CONNECT
JIB-1200GX
JIB1000.2H1MX
TK-JIB1000
VAIHA-SPX532
LAYOUT
OM400.1
EXT-312-424/29
WT-429-532 WUK-02.1
W800.6 + Pulley Block
4T
ACCESSORIES AND CONFIGURATIONS
CRANE COLOR
Boom & Covers
Frame & Outriggers
BATTERY CHARGER
JIB & ACCESSORI
15
OPERATIONAL ADVANTAGES
» Transportability with a simple trailer (*driving licence category may vary in the different countries) » Almost endless stabilisation possibilities for operating in restricted spaces.
16
» Main boom and jib have a compact size thanks to inner chains and cylinders and can reach even the narrowest places.
» Thanks to the high capacity jib it is possible to operate at height with precision and to install glass panes easily overcoming obstacles.
» Compact dimensions for the maximum accessibility even in the most restricted areas.
OPERATIONAL ADVANTAGES
17
APPLICATION SECTORS
Jekko s.r.l.Via Campardone,1 | 31014 Colle Umberto (TV) Italy
[email protected] | www.jekko-cranes.comJekko Mini Crane SPX532Sales Info | Rev.00
For further info and prices:
+39 0438 1710083