safety. Patient Monitoring Solution · 2019. 11. 27. · you centrally monitor the vital signs of...
Transcript of safety. Patient Monitoring Solution · 2019. 11. 27. · you centrally monitor the vital signs of...
Vista 120 Central Monitoring SystemPatient Monitoring Solution
The easy-to-use Vista 120 Central Monitoring System (CMS) letsyou centrally monitor the vital signs of up to 64 patients connectedto Vista 120/Vista 120 S bedside monitors. This central surveillancestreamlines workflow for clinicians, while significantly increasing patientsafety.
D-6
8804-2
012
Integrate and display patient data from Dräger ventilators,
anesthesia machines and patient monitoring systems
User selectable options
– Report Preview
– All report printable in PDF via Laser Jet Printer
– Full Disclosure optional 96 hours and 240 hours
– Independent alarms settings and batch processing alarms settings available
Flexible offerings including HW and SW only solutions
Embedded Mirth Connect for lexible vital signs export and ADT
Display real-time waveforms,
parameters and alarm status for up to
64 patients connected to Vista 120/
Vista 120 S bedside monitors
Seamless access to patient data
anywhere via Web View
Benefits
02 | Vista 120 Central Monitoring System
Easy to use
Most functions can be done in just three steps, allowing busy staff members more time for direct patient care.
Bi-directional control
Users can configure and display alarm settings at the central station for each bedside monitor. This eliminatesthe need for clinicians to walk to each bedside monitor to change alarm settings.
Flexible report exporting
For the convenience of clinicians, patient monitoring reports can be exported to networked printers or into PDFdocuments for review.
Supports up to 64 patients
Simplifies central monitoring by simultaneously displaying monitored information from a maximum of64 connected bedside patient monitors on two screens.
Network security
Vista 120 CMS software runs on a dedicated network, it does not communicate with the external network, whichhelps ensure the security of patient data.
Related Products
Vista 120 Central Monitoring System | 03
D-6
829_
2014
Vista 120
Hospitals have a common challenge: provide the best care possiblein an environment where patient populations are growing, financialconstraints are increasing and caregivers are overburdened.Dräger offers a patient monitor to meet the clinical needs in theseenvironments: the Vista 120.
D-1
3374
-201
6
Vista 120 S
Dräger understands the growing need for a patient monitor with built-in connectivity that provides essential monitoring at a good value.The Vista 120 S supports adult, pediatric and neonatal patients and canbe used on its own or with a Dräger therapy device as a fully integratedworkstation.
Technical Data
04 | Vista 120 Central Monitoring System
PerformancePhysiological waveforms displayed 2 ECG waveforms
1 RESP waveform1 PLETH waveform8 IBP waveforms1 CO2 waveform
4 AG waveforms for CO2, O2, N2O and AA
3 waveforms from ventilator/anesthesia machine1 BIS waveform
Physiological parameters displayed ECG: HR, ST value, PVCsRESP: RRNIBP: SYS, DIA, MAPSpO2: SpO2, PR PI, SpO2 bar graph
TEMP: T1, T2, TDIBP: ART, PA, CVP, RAP, ICP, LAP, P1, P2, PPVCO2: etCO2, FiCO2, AwRR
AG: etCO2, FiCO2, AwRR; EtO2, FiO2; EtN2O, FiN2O,
HAL/ISO/ENG/SEV/DES:Et, Fi, MACC.O.: C.O., TBParameters from ventilator/anesthesia machine: PEEP, PIP,Pmean, AwRR, MV, MVi, VT, VTi, etCO2, FiCO2, EtN2O, Fin2O,
EtO2, FiO2, EtAA, FiAA, EtHal, FiHal, EtEnf, FiEnf, Etlso, Filns,
EtDes, FiDes, EtSev, FiSev, MacBIS: BIS, EMG, SQI, SR, SEF, TP, BC
Software PerformanceTrend view 240-hour trend display for each bedside monitor
12-hour short trend display for each bedside monitorAlarm events 20,000 pieces of parameter alarm events for each bedside
monitor (within 240 hours)Alarm type Physiological alarm
Technical alarmAlarm mode 3 levels of audible and visual alarmsNIBP measurement storage and review 20,000 pieces of NIBP measurement for each bedside monitor
(within 240 hours)C.O. measurements 20,000 pieces of C.O. measurement for each bedside monitor
(within 240 hours)Event disclosure 720 alarm strips including parameters and ST alarmFull disclosure waveform storage 96 or 240 hour full disclosure waveform storage/reviewRemote Access Web observation in the hospital local area networkData Integration HL7
Recommended Hardware Configuration
Components RequirementsPC workstation CPU: Intel Core i3 Duo 3.0GHz or above
Memory: 4G or aboveHard disk: 500GB or aboveDisplay interface: 2LAN port: 1 or aboveUSB port: more than oneOS:Windows 7 Pro 32/64 bit
Technical Data
Vista 120 Central Monitoring System | 05
Windows 8 Pro 32/64 bitWindows 10 Pro 32/64 bit
Keyboard PS/2 or USB keyboard with CE markMouse PS/2 or USB mouse with CE mark
Specifications:Dimensions (inch)19 (wide screen)19 (regular screen)*17 (regular screen)
Resolution (pixel)1440 x 9001280 x 10241280 x 1024
Display
Quantity For 1 to 32 bedside monitors one displayFor 33 to 64 bedside monitors two displays
Printer LaserjetUPS 1000 W
Structure Ethernet 802.3Device Network switchTransmission rate 10M, 100MTransmitted information Waveforms, parameters and alarms of all
networked bedside monitors
Network device specifications
Maximum number of networked monitors 64Speaker Built-in speaker is recommendedKontron system CompatibleMarket availabilityThe Vista 120 Central Monitoring System is available in selected markets only.For availability in your area, please contact the appropriate Dräger office from those listed below.* Recommended
Notes
06 | Vista 120 Central Monitoring System
Not all products, features, or services are for sale in all countries.Mentioned Trademarks are only registered in certain countries and not necessarily in the countryin which this material is released. Go to www.draeger.com/trademarks to find the current status.
CORPORATE HEADQUARTERSDrägerwerk AG & Co. KGaAMoislinger Allee 53–5523558 Lübeck, Germanywww.draeger.com
Manufacturer:Drägerwerk AG & Co. KGaAMoislinger Allee 53-5523542 Lübeck, Germany
REGION DACHDrägerwerk AG & Co. KGaAMoislinger Allee 53–5523558 Lübeck, GermanyTel +49 451 882 0Fax +49 451 882 [email protected] EUROPEDrägerwerk AG & Co. KGaAMoislinger Allee 53–5523558 Lübeck, GermanyTel +49 451 882 0Fax +49 451 882 [email protected].
REGION MIDDLE EAST, AFRICADrägerwerk AG & Co. KGaABranch OfficeP.O. Box 505108Dubai, United Arab EmiratesTel +971 4 4294 600Fax +971 4 4294 [email protected] ASIA PACIFICDraeger Singapore Pte. Ltd.25 International Business Park#04-20/21 German CentreSingapore 609916Tel +65 6308 9400Fax +65 6308 [email protected].
REGION CENTRALAND SOUTH AMERICADräger Panama S. de R.L.59 East Street, Nuevo PaitillaHouse 30, San Francisco TownPanama City, PanamaTel +507 377 9100Fax +507 377 [email protected].
Locate your Regional SalesRepresentative at:www.draeger.com/contact
91 0
6 17
5 |
18.1
1-1
| V1
.61
| H
Q |
PP
| S
ubje
ct to
mod
ifica
tions
| ©
201
8 D
räge
rwer
k AG
& C
o. K
GaA