MADE BY SMART TECHNOLOGY GROUP

THE RELIABLE TOOL FOR SAFE & SOUND

EVACUATION

There are strict national laws that impose specfic duties on employers in regard to evacuation. All these laws, in every country, may be summarised in just few words:

from every workplace where there are employees, the proper conditions for quick and safe evacuation must be provided – and these conditions must be adjusted

to the number of people that must leave endangered zone

THEORY VS. PRACTICE

But how full information regarding the number of• employees need to be evacuated• employees who reached evacuation pointmay be gathered in fast and reliable way?

Lack of such knowledge is a genuine

threat to all employees!

THEORY VS. PRACTICE

Coordinators are responsible for safe&sound evacuation. They operate in specially designed zones: rooms, production floors or warehouses.In the time of evacuation, they must bring all employees from their zone to evacuation point.

But how can coordinator know

the current and real number of employees in a zone that he is responsible for?

THEORY VS. PRACTICE

To manage evacuation point is a serious challenge.Coordinator must as soon as possible compare the number of employees need to be evacuted from his zone withthe number of employees that actually reached his evacuation point.

Did all employees make it?Are the missing employees in a burning warehouse or are they simple in another evacuation point? From which zones are additional employees that come to his evacuation point?

These are key issues, determining evacuaction success and crew’s safety.

THEORY VS. PRACTICE

The most popular methods are:

• manual counting – highly imprecise, time-consumming;

• identification with proximity card – general chaos and hurry make that it is easy to forget about card, in crowded evacuation point it is not easy to use it and precious time is wasted.

The wrong or too late identification results may be tragic. How to avoid that?

WRONG APPROACH

the system of tools based on RFID UHF technology

We have solution!

easy to integrateflexible to manageeffective in action

Our solutions may be implemented in two ways together or separately:

Two models

employees identification in specific zones in their workplacesemployees identification at evacuation point

touchless identification

no employee’s action is required to be correctly identified

SIMPLICITY FOR EMPLOYEES

We have solution!

How does it work?

EVERY EMPLOYEE HAS A TAG-LANYARD

ANTENNAS ASSEMBLED AT DOORS AND GATES ALLOW

FOR EMPLOYEES IDENTIFICATION IN SPECIFIC

ZONES AND FOR VERIFICATION IF ALL OF THEM

LEFT WORKPLACES

AFTER REACHING EVACUATION POINT, ALL

EMPLOYEES ARE INSTANTLY IDENTIFIED

every employee is given tag-lanyard

such lanyard may be worn under workwear or hung on neck – and it will be always correctly identified

tag-lanyard makes that employee is identified

How does it work?

SMART RFID for evacuation

RFID UHF antenna is assembled at every entrance to every zone

it recognizes entering or leaving employees, correctly identifing even up to 350 people simultaneously passing under antenna

How does it work?

SMART RFID for evacuation

at every gate or passage between zones there are antennas assembled

they identify employees that pass under, even if they drive forklift

How does it work?

SMART RFID for evacuation

RFID UHF antennas

antennas are assembled at evacuation points, too

they identify arriving employees

they also inform if all employees reached their evacuation point

How does it work?

SMART RFID for evacuation

System parts:

RFID lanyard-tagRFID UHF reader RFID UHF antennas

SMART RFID for evacuation

antennas pass their signal to RFID UHF reader that sends data to server

data on the number of employees and their current location is generated and constantly updated in real time

thanks to that, in case of evacuation it is all clear how many and which employees must reach evacuation points

How does it work?

SMART RFID for evacuation

RFID UHF antenna

server

SMART RFID is the universal tool

It will work perfectly in• production floor• warehouse• office building

SMART RFID versatility

SMART RFID allows for:

perfectly correct identification of employees

gathering real time data on current number of employees in specific zones

full knowledge on number of employees that need to be evacuated

Coordinator always knows everything about the number of employees – at every stage of evacuation.

SMART RFID - summary

easy assembly of antennas and readers

simple SMART RFID integration with systems that are already in use

instant access to real time data

SIMPLICITY FOR MANAGERS

We have solution!

precise identification even up to 350 employees at the same moment

real time updated personal list of employees

touchless employees identification

instant access to information about employees reaching evacuation point (quantity, name, surname)

shortening time needed to evacuate employees from dangerous places

comfortable, light tags-lanyards

SMART RFID ADVANTAGES

Contact us!

office@smart-tg.comsmart-tg.com