97HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

RUBBER GOODS

With two full service Rubber Goods Test Labs in Illinois and Massachusetts, Hi-Line tests over 250,000 rubber gloves, sleeves, blankets, line hose, hoods, and boots each year. Hi-Line tests all classes of rubber goods from Class 00 to Class 4.

Hi-Line’s test labs are climate controlled and state-of-the-art. All testing procedures conform to ASTM standards.

Rubber Goods Testing Services

Hi-Line partners with utilities, contractors, and municipalities with just a few linemen while also offering complete change-out and

inventory programs for companies with over 5,000 linemen.

GLOVES SLEEVES BLANKETS LINE HOSE

OSHA REGULATIONS REQUIRE ELECTRICAL TESTING OF RUBBER INSULATING EQUIPMENT PRIOR TO THE FIRST USE AND PERIODICALLY THEREAFTER.

Testing Standards for Rubber Insulating Equipment30-60 Days 90 Days 6 Months 1 Year If Damage

SuspectedGloves Optional Recommended Required Required Required

Sleeves Optional Recommended Required Required

Blankets Optional Recommended Required Required

Line Hose Optional Recommended Required

Hoods Optional Recommended Required

Boots Optional Recommended Required

*These testing standards reference federal OSHA regulations and ASTM standards. Please note that some state OSHA regulations may have even more stringent testing intervals than shown above.

Are your Rubber Goods in Compliance? Testing Options

Rubber G

oods

Re-Testing (for USED product)

All items will be cleaned, visually inspected, electrically tested, date stamped, and individually packaged. Average turnaround is 5-7 business days.

Proof Testing (for NEW product)

All items will be visually inspected, electrically tested, date stamped, and individually packaged. Average turnaround is 1-2 business days.

RUBBER GOODS

These Salisbury rubber insulating gloves combine high dielectric and physical strength, flexibility and durability. Salisbury gloves have earned the reputation for superior performance meeting and exceeding the requirements of ASTM D120 specifications. Low voltage gloves are available in Type I Natural Rubber and Type II Salcor Ozone Resistant Rubber.

LOW VOLTAGE RUBBER GLOVES

Class 00 00 0 0 0 0 0 0 1Max Use Volt. 500V 500V 1KV 1KV 1KV 1KV 1KV 1KV 7.5KVTest Voltage 2.500V 2,500V 5KV 5KV 5KV 5KV 5KV 5KV 10KV

Length 11" 11" 11" 11" 11" 11" 11" 14" 14"Color Red Black Yellow Black Yellow/Blk Blue Red Blk/Yellow Yellow/Blk

Cuff Style Straight Straight Straight Straight Straight Straight Straight Straight Straight

Material Natural Rubber

Natural Rubber

Natural Rubber

Natural Rubber

Natural Rubber Salcor Natural

RubberNatural Rubber

Natural Rubber

Gloves Only* E0011R E0011B E011Y E011B E011YB E011BL E011R E014BY E114YBGlove Kit** GK0011R GK0011B GK011Y GK011B GK011YB GK011BL GK011R GK014BY N/A

Leather Protectors HLEGP0 HLEGP0 HLEGP0 HLEGP0 HLEGP0 HLEGP0 HLEGP0 ILPG4ELC HLEGP3

*When ordering Rubber Gloves only, proof testing is not included. Gloves must be proof tested before issued for use (Pg. 97).**Glove Kit includes Rubber Gloves, Proof Test, Leather Protectors, and Glove Bag (Cat. No. HL5965)

ClassA/C D/C Label

ColorMax Use Test VAC Max Use Test VDC00 500 2,500 750 10,000 Tan0 1,000 5,000 1,500 20,000 Red1 7,500 10,000 11,250 40,000 White2 17,000 20,000 25,500 50,000 Yellow

3 26,500 30,000 39,750 60,000 Green4 36,000 40,000 54,000 70,000 Orange

RUBBER GOODS ARE NOT INTENDED TO BE USED AT TEST VOLTAGE RATINGS

1. Flatten your hand.2. Run a flat measuring tape around

your palm following a line across all of your knuckles.

3. Add 1" for your final glove size.

Example: If you measure 9" and add 1", your glove size is 10.

MEASURE YOUR GLOVE SIZE

GLOVE DUSTCat. No. 10-4-1 - 6oz BottleCat. No. 10-4 - Case of 12

This cooling, frictionless powder absorbs moisture and perspiration when wearing rubber gloves.

RUBBER GLOVE CLEANERCat. No. RBG-35LR - Qt Spray BottleCat. No. RBG-D72 - 72 Ct Wipe Canister

Specially formulated water-based cleaner for removing grease, dirt, carbon, creosote, and other grimes from rubber goods. Safe for use on all natural & synthetic rubber.

Rub

ber G

oods

Most Rubber Gloves are available in sizes 7, 8, 8.5, 9, 9.5, 10, 10.5, 11, & 12. Class 3 & 4 gloves begin at size 9. Rubber Mittens are only available in sizes 9, 10, & 11.

98HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

99HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

RUBBER GOODS

HIGH VOLTAGE RUBBER GLOVES

Class 2 2 2 2 2 2 2 2 2 2Max Use Volt. 17KV 17KV 17KV 17KV 17KV 17KV 17KV 17KV 17KV 17KVTest Voltage 20KV 20KV 20KV 20KV 20KV 20KV 20KV 20KV 20KV 20KV

Length 14" 14" 14" 14" 16" 16" 16" 16" 18" 16"

Color Red/Black Black Black Red/Black Black Black Yellow/

BlackYellow/Black

Red/Black

Black/Yel-low/Black

Cuff Style Straight Straight Bell Cuff Bell Cuff Straight Bell Cuff Bell Cuff Straight Contour Cuff Bell Cuff

Gloves Cat. No.* E214RB E214B E214BCB E214BCRB E216B E216BCB E216BCYB E216YB E218CRB E216BCBYB

Leather Protectors HLEGP3 HLEGP3 HLEGP3 HLEGP3 HLEGP5 HLEGP5 HLEGP5 HLEGP5 HLEGP5 HLEGP5

These Salisbury rubber insulating gloves combine high dielectric and physical strength, flexibility and durability. All high voltage gloves are Type I Natural Rubber and exceed the requirements of ASTM D120 specifications.

Class 2 2 2 3 3 3 4 4 4Max Use Volt. 17KV 17KV 17KV 26.5KV 26.5KV 26.5KV 36KV 36KV 36KVTest Voltage 20KV 20KV 20KV 30KV 30KV 30KV 40KV 40KV 40KV

Length 14" 16" 18" 16" 16" 18" 16" 18" 18"

Color Black Black Yellow/Black

Red/Black Red/Black Yellow/

BlackYellow/Black Black Yellow/

Black

Cuff Style Bell Cuff Mitten

Bell Cuff Mitten

Contour Cuff Straight Bell Cuff Contour

Cuff Bell Cuff Straight Contour Cuff

Gloves Cat. No.* EM214BCB EM216BCB E218CYB E316RB E316BCRB E318CYB E416BCYB E418B E418CYB

Leather Protectors ILPM3S ILPM5S HLEGP5 HLEGP3 HLEGP3 HLEGP5 HLEGP3 HLEGP3 HLEGP3

High Voltage Glove Styles:• Bell Cuff easily accommodates rubber sleeves &

heavier winter clothing. Better air flow in warm weather.• Straight Cuff is the original style• Contour Cuff prevents bunching at the elbow.• Mittens keep the user warmer during cold weather.

*When ordering Rubber Gloves, proof testing is not included. Gloves must be proof tested before issued for use (Pg. 97).

Rubber G

oods

GP0

RUBBER GOODS

GP4

MAINTAIN 1" OF EXPOSED RUBBER CUFF PER 10,000 RATED VOLTS

These flexible leather protectors provide excellent protection for rubber gloves and meet ASTM specs.

The low voltage protectors are made from white goatskin, while the high voltage protectors are made from cream grain cowhide.

PREMIUM LEATHER PROTECTORS

Cat. No. DescriptionGP0-size Low Voltage Protector, Goatskin, 10" o.a.GP4-size High Voltage Protector, 12" o.a. with 3" cuffGP6-size High Voltage Protector, 14" o.a. with 5" cuff

L.V. Sizes: Order by Exact Rubber Glove SizeH.V. Sizes Available: 7.5/8, 8.5/9, 9.5/10, 10.5/11, 11.5/12

LEATHER PROTECTORS FOR RUBBER GLOVES

Cat. No. DescriptionHLEGP0-size Low Voltage Protector, 10" o.a.HLEGP3-size High Voltage Protector, 12" o.a. with 3" cuffHLEGP5-size High Voltage Protector, 14" o.a. with 5" cuff

L.V. Sizes: Order by Exact Rubber Glove SizeH.V. Sizes Available: 8/8.5, 9/9.5, 10/10.5, 11/11.5, 12

HLEGP0

GLOVE LINERS

HLEGP3

FIELD GLOVE INFLATOR

Cat. No. DescriptionG-99 Glove Inflator

G-100 Glove Inflator Kit (includes G-99, G100A, strap, and storage bag)

G100A Low Voltage Glove Adapter (Class 0 & 00)

Designed for all sizes, cuff types, and lengths of gloves. Use low voltage adapter for classes 0 & 00. The glove is secured to the inflator using a nylon strap and inflated by pumping the bellows. Complies with OSHA 1910.137(b)(ii) Air Test.

G-100

FIELD INFLATION TOOL

Cat. No. HLFAIT Slide the end of the cuff of the glove into the jaws

of the tool. Roll the glove over and around the tool to create a tight seal for inflation and visual inspection.

GL

ML

Rub

ber G

oods

These protectors are made over a curved hand form to ensure a proper fit over rubber gloves.

Made to ASTM specs including a reinforced thumb strap, wrist pad, adjustable backstrap, nylon locking buckle, and fluorescent orange cuff.

The low voltage protectors are made from white goatskin, while the high voltage protectors are made from tan cowhide.

Cowhide gloves with silicone fingertip and palm grip pads for tactile control. Arc rated to 40 cal/cm².

Cat. No. DescriptionTPG-010-size 10" Leather ProtectorTPG-012-size 12" Leather ProtectorTPG-014-size 14" Leather ProtectorTPG-016-size 16" Leather ProtectorSizes Available: 9/9.5, 10/10.5, 11/11.5

LEATHER PROTECTORS WITH SILICONE GRIPS

Cat. No. Description

GL Cotton/Poly Blend Glove Liner

EGL Lightweight Summer Liner89/1402 100% Cotton Glove Liner

ML One Finger Mitten Liner

100HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

101HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

RUBBER GOODS

Salisbury sleeves feature a reinforcing fold at the cuff which adds less bulk and fits into the glove easier. All sleeves are Type 1 Natural Rubber and meet ASTM D1051.

Class 2 2 2 2 2Max Use Volt. 17KV 17KV 17KV 17KV 17KVTest Voltage 20KV 20KV 20KV 20KV 20KV

Color Yellow Yellow/Red Red/Yellow Yellow/Black YellowStyle Dipped Dipped Dipped Dipped Molded

Fit X-Curved X-Curved X-Curved X-Curved CurvedSizes S, R, L, XL S, R, L, XL R, L, XL S, R, L, XL R, L, XL

Cat. No.* D2-size-Y-EC D2-size-YR-EC D2-size-RY-EC D2-size-YB-EC 2-size-Y

SLEEVE STYLES

• Molded Sleeves are manufactured by either injection or compression mold-ing methods.

• Dipped Sleeves typically offer more flexibility. They are are manufactured in the same way as Salis-bury rubber insulat-ing gloves. Porcelain forms are dipped into liquefied rubber, dried, trimmed, marked and cured.

RUBBER INSULATING SLEEVES

Cat. No. H-1 Sleeve harness with B-2 buttons.

Cat. No. S-1Pair of Sleeve Straps with B-2 buttons.

Cat. No. B-22Two piece

Sleeve Buttons (Set of 4)

*When ordering Rubber Sleeves, proof testing is not included. Sleeves must be proof tested before issued for use (Pg. 97).

Class 3 3 3 4 4Max Use Volt. 26.5KV 26.5KV 26.5KV 36KV 36KVTest Voltage 30KV 30KV 30KV 40KV 40KV

Color Yellow Yellow/Red Red/Yellow Maroon Black/YellowStyle Molded Dipped Dipped Molded Dipped

Fit Curved X-Curved X-Curved Curved X-CurvedSizes R, L, XL S, R, L, XL R, L, XL R, L R, L, XL

Cat. No.* 3-size-Y D3-size-YR-EC D3-size-RY-EC 4-size-M D4-size-BY-EC

Rubber G

oods

Size A B C D

X-C

urve

d Small 24.3" 15.1" 12.5" 5.8"Regular 26.5" 15.5" 12.3" 5.3"Large 27.8" 16" 12.9" 6.9"

X-Large 29.5" 17.5" 12.9" 7"

RUBBER GOODS

RUBBER SHIPPING CONTAINER

Cat. No. HL5905Two Pocket Glove

Bag. One 18" pocket and one 16" pocket

Cat. No. HL5905-VSame as above but

made of vinyl.

Cat. No. HL5910Glove bag stores

one pair of gloves (up to 18")

Cat. No. HL5920Two pocket

glove bag. Both pockets hold up to 18" gloves. 19.5"x8.75"

Cat. No. HL5965Low Voltage Glove Bag.

12.5" x 8.75"Cat. No. HL5975

Sleeve Bag. 12"x30"

Cat. No. HL5994Combo glove and sleeve bag. 30" x 9"

Cat. No. HL5992 Same as above but with hard body

GLOVE & SLEEVE STORAGE BAGS

LINE HOSE STORAGE

Poly canisters designed to store and protect up to 36" square rubber insulation blankets. Lids are permanently attached. Large model has molded handle for easy carrying.

HLBC-10HHLBC-7

BLANKET CANISTERS

Cat. No. Dia x Lgth CapacityHLBC-7 7" x 37" (4) - 36" Blankets

HLBC-10H 9" x 37" (6) - 36" Blankets

Cat. No. DescriptionHLHC-6 60" Line Hose Canister

HLHC-LS Lift Strap with CanisterHL5940-48 48" Canvas Line Hose BagHL5940-60 60" Canvas Line Hose Bag

Our 10" diameter molded line hose canister is designed to accommodate 6' rubber line hose; connector end or straight. Ideal for transportation to and from our test lab.

Our canvase line hose bag come with a strap handle. Two sizes are available (48" and 60")

Rub

ber G

oods

Cat. No. Dim. Capacity

FP26124"L x

19.5"W x 12"H

• 60 pair Class 0 Gloves or• 20 pair Class 2 Gloves

FP24226"L x 17"W x 12"H

• 50 pair Class 0 Gloves or• 25 pair Class 2 Gloves or• 14 pair Regular Sleeves or• 12 pair Large Sleeves or• 10 pair XL Sleeves

These plastic containers are ideal for shipping rubber gloves and sleeves to and from our test lab. They have attached, hinged covers. 70 lb max load.

102HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

103HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

RUBBER GOODS

2021

SWITCHBOARD MATTING

Provides personal protection for electricians and operators working around switchboards and other high voltage apparatus.

RUBBER INSULATING BLANKETS

TY-14HS-21

Class 0 0 0 2 2 2 2 4 4 4 4 4Max Use Volt. 1KV 1KV 1KV 17KV 17KV 17KV 17KV 36KV 36KV 36KV 36KV 36KV

Test Voltage 5KV 5KV 5KV 20KV 20KV 20KV 20KV 40KV 40KV 40KV 40KV 40KV

Size 12"x36" 18"x18" 36"x36" 36"x36" 36"x36" 22"x22" 22"x22" 36"x36" 36"x36" 36"x36" 22"x22" 22x22"

Color Yellow Yellow Yellow Black Black Black Black Orange Black Orange Orange Orange

Style Solid w/Velcro

Solid w/Velcro

Solid-no Velcro Solid Slotted Solid Slotted Solid Slotted Slotted Solid Slotted

Eyes None None None 6 28 28 28 6 6 28 28 28

Cat. No.* 123LV 1818LV 3636LVNV 300E 1100 12 14 900E 901E 1300 13 15

INSULATING ROLL BLANKET

Made from a high strength fabric reinforced Type II rubber. Can be custom-cut to fit each application at the job site. Meets ASTM F2320 standards.

Clear PVC material permits complete visibility, yet provides the necessary insulating properties meeting ASTM F1742 standards.

Flexible to -40°F/C and puncture/tear resistant. Also flame (self-extinguishing), oil, and ozone resistant.

Cat. No. Description21 9.5" Nylon w/Rubber Tips. Fits shot gun stick

HS-21 9.5" Nylon w/Rubber Tips & Hot Stick Rings20 8.5" Wood Blanket Pin w/Rubber Tips

MB-6 Magnetic Blanket ButtonTY-14 14" Tie StrapTY-30 30" Tie Stap

USCP-001 Klondike Clamp fits 6"-11" polesUSCP-002 Klondike Clamp fits 11"-20" poles

MB-6

Cat. No. DescriptionRLB0 Class 0, 1KV Max Use, 36"x30ft roll, YellowRLB1 Class 1, 7.5KV Max Use, 36"x30ft roll, Yel/Org

RLBPVC1 Class 1, 7.5KV Max Use, 36"x30ft roll, Clear

Cat. No. Class Type Dimensions Max Use Voltage

M24-2 2 1 1/4" x 24" 17,000M30-2 2 1 1/4" x 30" 17,000M36-2 2 1 1/4"x36" 17,000

Specify length in yards when ordering

*When ordering Rubber Blankets, proof testing is not included. Blankets must be proof tested before issued for use (Pg. 97).

Rubber G

oods

USCP-001

BLANKET PINS

Blankets are manufactured to high quality standards and subjected to a series of thorough inspections to assure purity, consistency & flexibility.

• Black natural rubber (Type-I) is for use where ozone concentrations are low.

• Orange or black synthetic EPDM rubber (Type-II) for use on high voltage distribution circuits, as it features excellent corona, aging, and weathering resistance.

RUBBER GOODS

LINE HOSE

For use on voltages through 34.5kV. It may be installed by hand, wearing rubber gloves or with hot sticks using the SU applicators.

INSULATOR COVERS - TYPE II

OKRG

OJRGOFRG

CUT OUT COVERS - TYPE II

Manufactured from Type II Salcor, our lightweight, flexible line hose is resistant to the effects of ozone and ultraviolet deterioration. The construction securely interlocks with its corresponding covers and connectors. Available as Straight Line Hose or with a Connector End for easier connection of line hose and covers. Meets ASTM standard spec. D1050

COUPLER END LINE HOSE

PLAIN END LINE HOSE

EXTENDED LIP LINE HOSE

Cat. No. Class DimensionsOR125-45C 2 1.25" x 4.5'OR125-6C 2 1.25" x 6'OR150-45C 3 1.5" x 4.5'OR150-6C 3 1.5" x 6'

Cat. No. Class DimensionsOR100-6 2 1" x 6' OR125-45 2 1.25" x 4.5'OR125-6 2 1.25" x 6'OR150-45 3 1.5" x 4.5'OR150-6 3 1.5" x 6'

Cat. No. Class DimensionsSU150-6 4 1.5" x 6'SU200-6 4 2" x 6'SU250-6 4 2.5" x 6'

CONNECTORS (for use with extended lip line hose)Cat. No. UC - For 1.5" line hoseCat. No. UC2 - For 2"-2.5" line hose

Other sizes and styles available.

Cat. No. Class DimensionsCC24 2 24" x 15" x 3.5"CC30 4 30" x 20" x 7"

Can be used for overhead cutouts as well as for under-ground pad-mount applications. Complies with ASTM D1049.

Weather resistant, type II Insulator Covers are used with conventional line hose to cover pin-type insulators. All covers feature RIB-GRIP construction to lock to the underside of the insulators. The large diameter arm overlaps the small arm of the adjoining cover on double arm constructions which provides complete insulation at the joint.

Cat. No. Class Description Insulator Class

OKRG 3 Fits 1.25" & 1.5" Line Hose 55-5OFRG 2 Fits 1" Line Hose 55-1/2/3OJRG 2 Fits 1" Line Hose 55-4

Cat. No. S99 Reduces friction on SALCOR or natural rubber product and forms an oxygen barrier which helps reduce corona cutting.

SILICONE SPRAY

Rub

ber G

oods

104HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

105HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

RUBBER GOODS

Yellow polyethylene line guards ares 1/3 the weight of rubber line hose and feature an easy to clean, smooth finish. Meets requirements for ASTM F712 & F968.• Ideal cover during cross-arm change out• Large inside diameter of 1.77"• Connecting male / female ends • Built-in wear indicator (inner layer of material is black, outer layer is yellow. If either layer should wear so opposite layer is visible, the product must be taken out of service immediately.)

POLY LINE GUARDS (15KV & 25KV)

These high-density polyethylene covers virtually surround the hot parts and hardware to give the linemen extra protection when rubber gloving or using hot sticks.

The conductor, insulator and dead-end units mate together to cover pin-type or post-type insulator construction and can also be used with the dead-end cover. Use models with Grip-All adapters for hot stick applications. Handles for gloving .

Cat. No. 21826This 6', Type I high density, cross link polyethylene

cover is rated Class 4 (36.6 kV guarded phase to guarded phase). It is applied using rubber gloves when following appropriate company work rules. The inside diameter is 3" making it useful on a wide range of conductor sizes.

The unique "connector-stop" molded into one end prevents covers from overlapping during installation. Also compatible with 1.5" class 3 or 4 flexible rubber line hose. Wgt. 6.5 lbs.

These insulator covers are made from bright orange, high density polyethylene and mate with the 5' Conductor Covers shown to the right.

They are 21" long, 8-1/2" wide and available in 6" and 9" heights to fit different size insulators. Use model with Grip-All adapter for hot stick applications; Plain for gloving.

Rating: 25kV phase to phase

Cat. No. C406-0504 For energized line work, this rigid cover up

fits onto crossarm sizes up to 3-3/4" x 4-3/4". The two-piece design telescopes from 13.1" to 20.9". A hotstick adapter permits handling with a clampstick. Meets ASTM Class 3 for 26.4kV phase-to-phase.

LIGHTWEIGHT CONDUCTOR COVER 5' CONDUCTOR COVERS

Cat. No. Rating Description

C406-0181GA 25KV 5' Cover w/Grip-All AdapterC406-0181 25KV 5' Cover w/4' Epoxiglas HandleP406-0184 25KV 5' Conductor Cover

C406-0514GA 36.6KV 5' Conductor Cover with Grip-All Adapter

EXPANDABLE CROSS ARM COVER

C406-0181GA

Cat. No. Class Description Weight6050 2 15KV 5' Connector End 1.9 lbs6060 2 15KV 6' Connector End 2.3 lbs6055 3 25KV 5' Connector End 3.6 lbs6065 3 25KV 6' Connector End 4.4 lbs

Cat. No. DescriptionC406-0182 6" Insulator Cover w/Grip-All AdapterC406-0182L 9" Insulator Cover w/Grip-All AdapterC406-0009 Cutout Cover with Locking PinC406-0164 Dead End Cover (fits over 2-10" DE insulators)

INSULATOR COVERS

P406-0184

Rubber G

oods

CROSS SECTION

RUBBER GOODS

CLASS 5 POLE COVERS• High dielectric

polyethelene will not flash flame.

• Ribbed to reduce cover contact with the pole.

• Use nylon button join covers in tandem when more coverage is needed.

• 36.6KV phase to phase. Tested to ASTM F712.

• Designed for easy installation. • Equipped with an eye and can be

installed with all shotgun sticks. • Interlocking male and female

ends. • Accept all wire sizes up to 1,272MCM

45/7ACSR

SPIRAL CONDUCTOR GUARDS

Cat. No. Description Length6010 35KV Conductor Guard w/Shotgun Eye 4.5'

6012 46KV Conductor Guard w/Shotgun Eye 4.5'

12000 69KV Conductor Guard w/Shotgun Eye 4.5'

• Provides extra protection with a wide air space be-tween two thicknesess of solid insulation.

• Tough, durable ABS plastic with Grip-All adapater. • All units interlock with each other. • 15/36.6KV units are formed on the ends to fit over

most 15KV insulators. Tested to ASTM F712.

Cat. No. M4933Prevent tie wires from contacting

crossarm when tying/untying insulators. High dielectric polyethylene, 24". For single or double arm. Meets Class 4 requirements and tested to ASTM F712.

CROSSARM COVER

Cat. No. Dimensions WeightM4937-4 9" x 48" 9 lbsM4937-6 9" x 72" 13 lbs

C406-0030 12" x 48" 11 lbsC406-0000 12" x 72" 16 lbs

CLASS 4 POLE COVERS• Orange thermoplastic, Type I

ABS, cold weather, high impact plastic.

• Dimples minimize the amount of surface area contacting the pole.

• Dimples nest together "locking" two covers together.

• Allows for air flow between cover and pole to minime condensation and contamination buildup.

• Rated at 46kV phase-to-phase.

Cat. No. Capacity12-754 (2) 18" x 48" covers12-755 (2) 18" x 72" covers

POLE COVER STORAGE BAGS

Yelow vinyl storage bags fit the pole covers shown above.

Rub

ber G

oods

Cat. No. C406-0547Helps keep pole covers in

place. Apply midway or as a lower support. For 6", 9" or 12" diameter pole covers.

POLE COVER ROPE LOCK

Cat. No. Description LengthC406-0082GA 46KV Conductor Guard 53"C406-0083GA 15/36.6KV for Single Crossarm 53"C406-0084GA 15/36.6KV for Double Crossarm 53"

Cat. No. Dimensions Weight1357 9" x 48" 12 lbs2496 9" x 72" 19 lbs2464 12" x 48" 15 lbs2466 12" x 72" 22 lbs

106HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com