LEADING IN HUMIDITY MEASUREMENT

ROTRON IC AFTER SALES SERVICES

OUR OFFERS – YOUR POSSIBILITIES

TABLE OF CONTENTS

Engineering / Installation 4

Commissioning/Equipment hire 5

Calibration and adjustment in our calibration laboratory 6

Calibration mobile 7

Mapping / Repair 8

Calibration seminars/Product training courses on site 9

Validation 10

Contact form 11

3

ABOUT US

ROTRONIC is a leading manufacturer of humidity measuring instruments and has been combining technical innovation with Swiss quality for more than 40 years now. As for example with our latest de-velopment in the field of probes: the new HygroClip2, with integrated AirChip3000 technology, sets new standards in terms of accuracy, operating range and OEM flexibility.

ROTRONIC sells its products worldwide in 40 countries and has subsidiaries in the USA, Germany, Great Britain, France, Italy, Taiwan, Singapore and China.

Rotronic – Also your reliable partner after your purchase Customers today are no longer simply satisfied with products that work perfectly for the time being. They also place great value on various after-sales services. When you opt for one of our measuring instruments, we stand by you with advice and support long after the sale. This brochure gives you an overview of our after-sales services.

Rotronic – Quality binds us to our promise High-quality products from our own development and production, continuous innovation and the constant urge to manufacture even better products and deliver even better services are the central tenets of our corporate philosophy. The management system of ROTRONIC has been certified by BVQI. In so doing it was proven that the requirements of the standard ISO 9001:2008 are fulfilled.ROTRONIC products already pass through numerous tests during their pro-duction. Every product in the AirChip 3000 series can be tracked from start to delivery in a database. Data such as measurement reports, device configu-ration, adjustment data, scaling of output signals, etc. are stored and gua-rantee the user that the product he has bought satisfies his high demands. All Rotronic AirChip3000 products are GAMP5-compliant.

Rotronic – Leading in humidity and temperature measurement

* Good Automated Manufacturing Practice

4

Engineering /Project planningOur engineering/project planning service supports you from planning to realisation of your system: this guarantees an optimal design for your process plant. The uniqueness of your application can necessitate a multitude of function-specific settings and measurement systems. Rotronic is one of the leading suppliers in the world for humidity and temperature measurement equipment – profit from our know-how!

Case study:Customer requirements

– Planning and control of a temperature and humidity climate in a storage/production area taking the existing equipment/measurement devices into account

– Strict compliance with the specified standards – e.g. Food and Drugs Admi-nistration (FDA)

ENGINEER ING / INSTALLAT ION

Our approach

– Survey of the present situation – Evaluation of the optimum solution taking the given criteria into account – Detailed planning – Implementation/Commissioning

Result

With installation of the customised measurement system, the existing infrastructures could be used perfectly and a Rotronic system implemented that sets new standards as far as operation and maintenance costs are concerned! Have we aroused your interest – don’t hesitate to contact us: engineering@rotronic.ch Tel.: +41 (44) 838 11 11 www.rotronic.ch

InstallationYou have opted for a monitoring network, but do not know who can install it for you? Rotronic cooperates with reliable partners, who work regionally and know our products. They know, for example, what is important when it comes to designing and installing a RS485 network. If installed and configured cor-rectly, these networks work without problem right from the start.

Your benefits:•Inexpensive installation by specialists•Competent partners selected and trained by us

Your benefits:•Support from project planning through to implementation•You receive the optimum solution for your application at a favorable price•No mispurchases through want of advice

5

Commissioning/MaintenanceOnce the measurement system has been installed, it is commissioned. Rotronic engineers configure the system according to your requirements and in compliance with all standards. We will gladly also carry out maintenance and minor repairs on site for you.

Your benefits:•Quick commissioning by specialists•Documented configuration and settings

Equipment hireMany customers have their measuring instruments calibrated in our accredi-ted laboratory – others prefer to carry out calibration themselves – Rotronic gladly makes the HygroGen2 humidity and temperature generator available for this.Renting the device saves you investment in your own device and you are sure to receive equipment with outstanding accuracy that is traceable to the national standard at all times. Calibrate your Rotronic or third-party probes with the easy-to-use HygroGen. If you initially feel a little unsure – simply hire a Rotronic technician as well – he will explain the calibration procedure to you and stand by you in your first own calibrations/adjustments.Rotronic also rents data loggers in the HL20 series. With them you can record humidity and temperature data in an interval defined by you.

Typical applications for the HL20 data logger are: – humidity and temperature monitoring in storage and production rooms – humidity and temperature mapping in/for e.g. product packaging, coo-ling systems, foods, shipping processes, etc.

Your benefits:•Fast completion of the calibration process•Calibration with specialist equipment•Simultaneous calibration/adjustment of multiple probes. Rotronic puts the complete calibration documentation together on site!

We also rent data loggers for short-term use. The humidity and temperature data are recorded in an interval defined by you.

We will gladly prepare an offer tailored to your needs for you.

COMMISS ION ING/EQUIPMENT H IRE

HygroPalm

HL20 data logger

HygroGen2

6

Calibration and adjustmentEven though ROTRONIC instruments have excellent long-term stability, we recommend that probes be calibrated regularly – once a year is normally enough. More frequent calibration can be necessary if the probes are used in polluted/contaminated atmospheres.Humidity and temperature measuring instruments are precision instru-ments that must be serviced regularly to maintain reliability. Measuring errors can cause substantial product damage during production and

storage. If the last time you performed a calibration yourself is a while back – why not come to our calibration seminars (page 9) to refresh your knowledge and get some hands-on practice in just five hours?

What are the calibration options?We can calibrate your instruments both on your premises where they are in use or in our laboratory – or you calibrate the instruments yourself:

a) Calibration in Rotronic laboratory – RAG factory adjustment certificate (ISO 9001 standard) – SCS certificate (Swiss Calibration Standard, accredited laboratory ISO/IEC 17025)

b) We come to you – HygroGen humidity and temperature generator (1 to about 25 calibrations) – Calibration mobile (more than about 25 calibrations)

c) You calibrate yourself – Rotronic calibration device and SCS-certified humidity standards – SCS-certified reference probes (reference measurement)

Which calibration do I need: factory adjustment certificate (ISO) or SCS certificate?Your process requirements generally determine whether a factory adjustment certificate suffices or whether a SCS certi-ficate is needed. SCS certificates are generally required in the pharmaceutical industry, the medical technology industry, research and development and the food industry. SCS certifications are performed with high-precision dew point mir-rors, and for temperature calibration, an equally high-precision fluorine inert bath is used.The best-possible SCS calibration accuracy can only be achieved if all process parameters are controlled and checked at the highest level – SCS certification is therefore only possible in our accredited laboratory (SCS-065).

RAG factory adjustment certification can be carried out by you or by our calibration technicians regardless of the local conditions. The following calibration methods are suitable for this:a) HygroGen2 (humidity and temperature generator from 0…60 °C und 5…95 %rh)ROTRONIC humidity standards (calibration solutions from 0.5 %rh…95 %rh)Although RAG factory adjustment certification can be carried out by an instructed person, it is completely traceable to the national standard when the above-mentioned calibration methods are used.

We will gladly advise you on the optimal service for you.Please contact scs@rotronic.ch.

CAL IBRAT ION AND ADJUSTMENT

Calibration hierarchy

SI unit

METAS

- SCS 065

Consumer

International unit

National standard

Accredited agency

End customer

Consumer

7

Calibration mobile – how it works:Rotronic offers its customers a unique calibration service – we come to you with our mobile calibration lab and calibrate your Rotronic or third-party probes in the shortest of times!

With our dynamic humidity generator FG-431 or portable HygroGen2 device, we can calibrate your humidity and tem-perature probes in typically 3 to 5 minutes per calibration – naturally traceable to the national standard! All we need is a 230 VAC power socket. After calibration you not only have a high-precision instrument in your hands, but also a certifica-te traceable to the relevant national standard!Another unique feature is the calibration range of 0.1 ... 99 %rh with a measurement uncertainty of 0.5 ... 1.5 %rh depen-ding on the humidity. Traceable to national standards – in Switzerland METAS (Federal Office of Metrology and Accreditation).

We can of course also perform on-site temperature calibra-tions. This in a range of -25 ... 125 °C with a measurement uncertainty 0.03 ... 0.05 K depending on the interpretation and resolution of the display.

CAL IBRAT ION MOBI LE

Rotronic calibration mobile

Dynamic calibration unit

Fluorine inert bath HygroGen2 / HygroPalm23

Your benefits:•Minimal plant downtime•No administrative costs

(no shipping of the instruments)•Direct contact with the specialists•Minor repairs possible on site

8

Humidity and temperature mappingIncorrect temperatures or humidity can result in expensive damage to products. This must be avoided under all circum-stances and steps taken immediately in the case of unintended changes in climatic conditions!

However, before an FDA-compliant system can be installed, it is first necessary to investigate where and how many measuring points should be set up to monitor the production or storage rooms. This is done with the help of a tempe-rature and humidity mapping procedure. This mapping provides information on how many different temperature zones (temperature gradients) there are in the rooms. Using the measured data, it is possible to define the optimum storage places for products or, in the extreme case, to initiate changes in the room climate! Mapping also takes influencing factors such as direct sunlight, air conditioners, insulation, heat sources, outside temperature, etc. into consideration, resulting in recommendations on how to optimize conditions if applicable.Mapping is typically performed at very hot and very cold times of the year. The period of measurement analysis is about one to two weeks. A generous number of measuring points are used to ensure that every zone is covered!We recommend renewed mapping if a production or storage area is modified or if there are other significant changes to the room.

Mapping by ROTRONIC comprises:

– Analysis of the requirements and definition of the measuring points – Placement/Installation of the data loggers with traceable certificates – Continuous recording of the climatic conditions – Evaluation and analysis of the recorded data – Preparation of GMP-compliant documentation – Recommendations for optimisation from ROTRONIC

MAPP ING/REPA IR

Your benefits:• Exact data on room climate• FDA conformity• Knowledge of possible weak points

RepairOnce you have opted for a measurement instrument from ROTRONIC, you will soon discover you are working with sensors that offer a major benefit: long-term stability. Nevertheless, it is still possible that your instrument might need repair. In this case you can rely on a fast, high-quality and customer-orientated service from ROTRONIC.

Sometimes it is no longer worthwhile to repair an instrument due to the high cost. In such cases we offer you compatible new instruments with an attractive service discount.

In order to serve all our customers in a reasonable time, we work on a first-come/first-served basis. Most of our customers keep a stock of spare instruments for the transmitters and probes that are important to their processes, something we also recommend, particularly for unusual models. We also offer an express repair service for emergency cases.

If an instrument cannot be repaired and you do not have a reserve instrument, we will manufacture a compatible new instrument in the shortest of times – then, however, not with a discount, but with an extra express charge.

Your benefits:•Low costs for repairs•Greatest-possible competence directly from the manufacturer•High availability, short downtimes

9

Calibration seminarOur calibration seminars are gladly used by customers from various fields to refresh their knowledge or to learn the basics of calibration and the influencing fac-tors for the first time. In half a day you will be brought up to date in the sub-ject of calibration. You will also be given an opportuni-ty to perform real-life calibrations so that you can put your freshly gained knowledge into practice!

Subjects

– Principles of humidity and temperature measurement

– Principles of sensor technology and calibration – How often should/must calibration be performed? – What are the pitfalls in calibration? – Open discussion on your application

You can find our seminar schedule on the Rotronic homepage at www.rotronic.ch.On request we can also organise training specifically for you – simply contact us!

Your benefits:•Development of know-how in calibration•Flexible, independent and correct calibration•Certificate of participation

CAL IBRAT ION SEMINARS/PRODUCT TRA IN ING

Product trainingAre you interested in the principles of humidity measu-rement or in which instrument is best for which appli-cation? Why not then attend a Rotronic product training course – where you will also learn about issues such as the influencing factors of contaminants, pollutants, dust, solvents, etc.The courses are restricted to 10 people each!(The training courses are held at Rotronic or the customer’s premises.)

Your benefits:•No own fault-related costs•Optimal process control•Simplified maintenance

Seminar in Rotronic training room

Effective training thanks to small groups

10

Validation Plan

Ris

k M

anag

emen

t / D

esig

n Re

view

Cha

nge

Man

agem

ent

Con

figu

rati

on M

anag

emen

t

FunctionalSpecification

Operation Qualification

System ConfigurationSpecification

Implementation(Configuration)

InstallationQualification

User RequirementsSpecification

PerformanceQualification

Validation Report

(PQ)

(OQ)

(IQ)

VAL IDAT ION

ValidationGlobal companies are increasingly subject to obligatory international regulations. For example, manufacturers wishing to deliver pharmaceutical products or foods to the USA must fulfill the requirements of the FDA1. Another well-known code is GAMP2, which, although it is not legally binding, is an acknowledged standard for validation.

Validation means providing documented evidence that a system was planned/produced according to extremely strict quality guidelines, is tested to specifications and has been operated in a qualified manner since it was introduced.

Missing information and poorly specified or inadequately tested systems represent a risk and can lead to high maintenance costs and losses in productivity. Validation by a computer-aided system (CSV3) is therefore critical for legal and busi-ness reasons. The business reasons are also valid for fields not subject to special legal regulations.

Our products, including software, conform to specific FDA require-ments, are manufactured according to GAMP and provide a path to validation.

Rotronic supports you in validating your monitoring system:• Development of SOP4 for system validation (CSV)• Preparation of project-related validation plans and risk analyses• Preparation of IQ/OQ5 documents• Preparation of validation reports

Your benefits:•Competence directly from the manufacturer•Therefore lower costs•FDA/ GAMP-compliant systems

Validation model

FDA1: Food and Drug Administration

GAMP2: Good Automated Manufacturing Practice

CSV3: Computer System ValidationSOP4: Standard Operation Procedures

IQ/OQ5: Installation/Operation Qualification

11

CONTACT FORM

One small step to absolute precision...

Please fill in the following form.

Fax to +41 44 836 43 64 and we will contact you to discuss the further procedure without any obligation on your part.

Company

Customer number:

Street:

Postal code / Town:

Contact:

Telephone:

E-mail:

Product (article no.):

Serial number (if possible):

Third-party product (type):

Required service: (mark what wanted) ❑

Calibration on site at Rotronic

Filter change

Adjustment

Calibration device check

Calibration seminar

Product training

Interest in new products

Catalogue order

Documentation HygroGen2

Please call me on: ........../.....................

Preferred date for calibration: ..........|..........|..........

✗

On-line reservation

You can naturally also reserve your calibration appointment

directly at www.rotronic.ch/calibration.

ROTRONIC is present in more than 40 countries worldwide. You will always find a complete and up-to-date

list of our partners at www.rotronic.com/international.

ROTRONIC International

ROTRONIC Partners

ROT RONIC WORLDWIDE

SINGAPORE

ROTRONIC South East Asia Pte Ltd16 Kallang Place #07-04Singapore 339156Telephone +65 6294 6065Fax +65 6294 6096www.rotronic.com.sg

UK

ROTRONIC Instruments UK Ltd.Crompton Fields, Crompton WayCrawley, West Sussex RH10 9EEPhone +44 1293 57 10 00Fax +44 1293 57 10 08www.rotronic.co.uk

FRANCE

ROTRONIC Sarl56, Bld. de Courcerin, F-77183 Croissy-BeaubourgTelephone +33 1 60 95 07 10Fax +33 1 60 17 12 56Www.rotronic.fr

CHINA

ROTRONIC Shanghai Rep. Office2B, Zao Fong Universe Building, No. 1800 Zhong Shan West Road, Shanghai 200233, ChinaTelephone +86 40 0816 2018 Fax +86 10 8225 4374 www.rotronic.cn

ITALY

ROTRONIC Italia srlVia Repubblica di San Marino 1I-20157 Milano Telephone +39 02-39.00.71.90 Fax +39 02-33.27.62.99www.rotronic.it

SWITZERLAND

ROTRONIC AGGrindelstrasse 6, CH-8303 BassersdorfPhone +41 44 838 11 44Fax +41 44 837 00 73www.rotronic-humidity.com

GERMANY

ROTRONIC Messgeräte GmbHEinsteinstrasse 17 – 23, D-76275 EttlingenPhone +49 7243 383 250Fax +49 7243 383 260www.rotronic.de

USA

ROTRONIC Instrument Corp.Suite 150, 135 Engineers Road, Hauppauge, NY 11788 Telephone +1 631 427 3898 Fax +1 631 427 3902 www.rotronic-usa.com