Only nature imprints so well

EN

REGGIANIs big success is largely due to the rotary screen printingmachine UNICA. More and more Customers WORLDWIDE are printing woven andknitted fabrics, wide and narrow width , for household and fashionas well, with great satisfaction and PROFITABILITY.

Unica: the rotary printing machine

The new printing units highlight the typical features and advantagesthat, in more than 60 years, made REGGIANI the MANUFACTURERof REFERENCE for TOP QUALITY printing machines:

Closed bearing printing heads Multi-repeat printing heads (from 640 to 1018 mm, no need of

tools to change the repeat) Totally sealed and long-life lubricated printing heads (maintenance-less) Step-less adjustment printing height according to the thickness of fabric Step-less adjustment printing width (any screen cutting length accepted)

Individual screen drive with one or two BRUSHLESS servomotorsin closed loop

UNIFLUX linear magnetic system Easy and simple machine operation, with touch screen interfaces High reliability-efficiency electronics

The new pneumatic glue applicationAllows the perfect and continuous adjustment of the thickness of the glue on the fabric, reducing the maintenance job

UNICA Rotary Printing Machine

Dust and lint removal deviceReggiani supplies a system to remove dust and lintfrom the fabric to be printed. The new inverter allows the reduction of the torque andthe modulation of the suction required.

Quality and efficiency

The new blanket washing systemReduces considerably water consumption. Two brushes, one for each tank, work with variable speed tooptimise the blanket cleaning. Four rubber squeegees (the last one also adjustable) clean and dry per-fectly the blanket. The two brushes are equipped with inverter that allows the reduction of the torque and theadjustment of the brushes rotation speed according to the printing speed.

y for high profitability

PumpsPneumatic stainless steel pumps with different deliveries. The high quality of their components allows the use of colour pasteswith different values of viscosity always assuring a perfect printingevenness.

Rapid pump washing: optionalThis system, introduced on Reggiani machines to reduce dramaticallythe waste of time and water, allows the rapid washing of the colourfeeding circuit (ducts, suction, delivery, colour pump) by means ofestablished sequences of pressurized water ejections.The standard time execution is 30 seconds, the water consumptionis max. 30 lt/colour.

High precision and accuracy Self-aligning screen holders Evenness in the screen tension Perfect driving of the screen No risk of damaging the screens, no mechanical wearing Totally sealed and long-life lubricated (no maintenance required) Easy screen installation (with one operator only) Optimum control/access to the printing, even with big repeats,

thanks to the large distance between the printing heads

UNICA Rotary Printing Machine

Multi-repeat printing heads

Closed bearing printing heads

Technology and innova

From 640 to 1018 mm, totally pneumatic and electronically controlled, no need of tools to change the repeat. The operator is setting the repeat valuein the main touch screen, all the printing heads raise up and the screens can be easily installed on the machine without any extra mechanical parts butwith a great save of time.

6406686887258018199141018

With two brush-less servomotors

Screen

Fabric

Magnet

With one brush-less servomotor

Perfect evenness and uniformity also with wide width fabrics No centre-right, centre-left effect High flexibility Digital printing pressure step-less adjustment, from ultra-low to

very high pressure High efficiency and very low energy consumption No pole to pole overpressure (typical in multi-beam magnet

systems)

Uniflux linear magnetic system

Individual screen drive

ation for the best quality

Easy and friendly machine operationshigh efficiency and low consumptionAll the electronic components are the most updated and performing available on the market: the standard of Siemens (PLC, motion controls,inverters), as well as of Proface (control panels and touch screens).

Nowadays energy consumption is becoming more and more important in an industrial budget.

Reggiani, who is always concerned about environmental issues, has equipped his rotary printing machine 'Unica' with inverters on the dust andlint removal device, on the blanket washing, on the dryer fans, on the dryer exhaustion to guarantee a 25% saving on the energy consumption.

Moreover Reggiani applies the regenerating devices Sinamics (by Siemens) that allow to recover the braking energy.

The interfaces are simple and of immediate understanding:

One touch screen at the entry and exit of the machine; One touch screen on each printing unit (on both sides on

demand);

One main control board with a 15 TFT touch screen; One touch screen at the exit of the dryer.

Printing and design parameters can be easily adjusted, memorized andautomatically reproduced.

High reliability and very low energy consumption are the results ofREGGIANIs continuous efforts and investments in R & D.

UNICA Rotary Printing Machine

Easy and friendly wi

Washing-on-line system (WOL: optional)The washing on line system patented by Reggiani (patent N.1.271.128) is more and more appreciated by Customers worldwide.No operator required, in 10-12 minutes, IT IS POSSIBLE TO WASH AND DRY all the screens, the pumps, the color pipes, the blanket ON THEMACHINE.

The length and the numbers of the washing and drying cycles can be decided by the operator (and then memorized and automatically reproduced).After the washing/drying cycles, the machine is ready to re-start printing without any extra time to register the screens.

Conceived mainly for the colourways, the WOL system is washing so fast and well that it is normally used also when a new design has to be printed.

th low consumption

During printing

During washing

UNICA Rotary Printing Machine

Technical data models: 180, 200, 240, 280, 320 cm

number of colors: up to 24

speed: up to 90 mt/minute

printing heads: closed bearing, self-aligning, long-life lubricated

multi-repeat printing heads: from 640 to 1018 mm, step-less adjustment electronically controlled

screen drive: with one or two brush-less motors

printing width: step-less adjustment

squeegee system: with Uniflux linear magnetic system

operating and color side: right or left

gluing system: with pneumatic squeegee

blanket washing system: 2 variable speed brushes, 4 rubber squeegees (the last one adjustable)

interfaces: touch screens on each printing unit, touch screens at the entry/exit of the machine,

one control board with a 15 TFT touch screen

electrical cabinet: conditioned

teleassistance: built-in modem for troubleshooting and telediagnosis

Via Zanica, 17/o - 24050 Grassobbio (BG) - Italy - Tel. +39 035 3844511 - Fax +39 035 526952 - www.reggianimacchine.it - info@reggianimacchine.it