Rigging Tools - Bishop Lifting Products · PDF fileRigging Tools 132 Rigging Tools RIGGING...

Click here to load reader

  • date post

    26-Aug-2018
  • Category

    Documents

  • view

    263
  • download

    5

Embed Size (px)

Transcript of Rigging Tools - Bishop Lifting Products · PDF fileRigging Tools 132 Rigging Tools RIGGING...

  • Rigging Tools

  • www.Lifting.comRigging Tools 132

    Rigging Tools

    RIG

    GIN

    GTO

    OLS

    IPU10S: For use on Stainless Steel material.IPU10H: For use on materials with a surface hardness to 47Rc (450 HB).

    Universal - For Lifting in any Direction Available in capacities of .5 thru 30 metric tons (Higher Working Load Limits are available

    upon request). Wide variety of jaw openings available: 0 to 6.13. Welded alloy steel body for strength and smaller size. Forged alloy components, where

    required. Individually Proof Tested to 2 times the Working Load Limit with certification. Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently

    stamped on body. Each product is individually serialized, with the serial number and Proof Load test date

    stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.

    Available in a variety of styles: IPU10 - Standard clamp for materials with a surface hardness to 37Rc (345HB) IPU10J - Larger jaw opening. IPU10S - For use with Stainless Steel material. IPU10H - For use with materials with a surface hardness to 47Rc (450HB). Full 180 turning range for material transfer, turning or moving. Lock open, lock closed ability with latch for pretension on material and then release of material. Optional IP-5000 Stinger assembly available (see page 420). Allows for easy connection between the clamp and

    hoist hook. Minimum WLL of 10% of Maximum WLL. Maintenance replacement kits are available. Manufactured by a ISO 9001 facility.

    All sizes are RFID EQUIPPED.

    The IPU10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180) as needed. The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side-loading the clamp.

    IPU10SIPU10

    Model IPU10

    Model

    WorkingLoad Limit

    (t)*

    IPU10StockNo.

    WeightEach(lbs.)

    Dimensions(in.)

    Jaw A B C D E F G H J KIPU10 0.5 2701675 4.19 0 - .63 1.73 5.04 8.98 1.57 4.53 1.61 1.10 - .43IPU10 1 2701663 5.29 0 - .75 1.77 5.47 8.74 1.57 4.96 1.61 1.50 - .43IPU10 2 2701677 18.7 0 - 1.38 3.07 7.91 14.65 2.76 7.48 2.40 2.17 - .63IPU10 3 2701665 32.6 0 - 1.56 3.94 9.96 17.52 2.95 8.86 3.07 2.36 - .79IPU10 4.5 2701667 35.3 0 - 1.56 3.94 9.96 17.52 2.95 9.13 3.23 2.56 - .79IPU10 6 2701669 53.0 0 - 2.00 4.96 11.89 20.67 3.15 11.50 3.31 3.74 1.73 .79

    IPU10/J 6 2702469 67.3 2.00 - 4.00 4.96 11.89 20.67 3.15 13.46 3.31 3.74 1.73 .79IPU10 9 2701671 65.0 0 - 2.00 4.96 12.80 21.93 3.15 12.20 3.62 4.13 1.73 .79

    IPU10/J 9 2701673 67.2 2.00 - 4.00 4.96 12.80 22.13 3.15 14.17 3.62 4.13 1.73 .79IPU10 12 2701679 126 0 - 2.13 6.30 15.39 24.53 3.15 13.03 4.61 5.39 1.61 .98

    IPU10/J 12 2701681 130 2.13 - 4.25 7.01 17.28 26.50 3.15 16.34 4.61 5.39 1.61 .98IPU10 16 2701683 159 .25 - 2.50 7.01 18.31 28.90 3.46 15.63 4.69 6.02 1.77 .98

    IPU10/J 16 2701685 187 2.50 - 5.00 8.19 20.51 31.10 3.46 18.58 4.69 6.34 1.77 .98IPU10 22.5 2701687 280 .25 - 3.13 8.74 21.81 33.66 4.33 18.50 5.35 7.32 1.93 .98

    IPU10/J 22.5 2701689 287 3.13 - 6.13 9.96 24.72 36.61 4.33 22.64 5.35 7.72 1.93 .98IPU10 30 2701691 337 .25 - 3.13 8.74 21.46 33.86 4.33 18.50 5.98 7.32 2.13 1.18

    IPU10/J 30 2701693 364 3.13 - 6.13 9.84 24.41 36.81 4.33 22.24 5.98 7.72 2.13 1.18For stainless steel - with universal hoisting eye

    IPU10/S 0.5 2702275 4.19 0 - .63 1.73 5.04 8.98 1.57 4.53 1.61 1.10 - .43IPU10/S 1 2702263 4.63 0 - .75 1.77 5.47 8.74 1.57 4.96 1.61 1.50 - .43IPU10/S 2 2702277 16.8 0 - 1.38 3.07 7.91 14.65 2.76 7.48 2.40 2.17 - .63IPU10/S 3 2702265 32.7 0 - 1.56 3.94 9.96 1.752 2.95 8.86 3.07 2.36 - .79IPU10/S 4.5 2702267 35.3 0 - 1.56 3.94 9.96 17.52 2.95 9.13 3.23 2.56 - .79IPU10/S 6 2702269 53.0 0 - 2.00 4.96 11.89 20.67 3.15 11.50 3.31 3.74 1.73 .79IPU10/S 9 2702271 65.1 0 - 2.00 4.96 12.80 21.93 3.15 12.20 3.62 4.13 1.73 .79IPU10/S 12 2702279 67.3 0 - 2.13 6.30 15.39 24.53 3.15 13.03 4.61 5.39 1.61 .98

    For very hard materials - with universal hoisting eyeIPU10/H 0.5 2702175 4.19 0 - .63 1.73 5.04 8.98 1.57 4.53 1.61 1.10 - .43IPU10/H 1 2702177 16.8 0 - 1.38 3.07 7.91 14.65 2.76 7.48 2.40 2.17 - .63IPU10/H 2 2702165 32.7 0 - 1.56 3.94 9.96 17.52 2.95 8.86 3.07 2.36 - .79IPU10/H 3 2702167 35.3 0 - 1.56 3.94 9.96 17.52 2.95 9.13 3.23 2.56 - .79IPU10/H 4.5 2702169 53.0 0 - 2.00 4.96 11.89 20.67 3.15 11.50 3.31 3.74 1.73 .79IPU10/H 6 2702171 65.1 0 - 2.00 4.96 12.80 21.93 3.15 12.20 3.62 4.13 1.73 .79

    K

    J

    G

    * Design Factor based on EN 13155 and ASME B30.20.

    Vertical Lifting Clamp

  • www.Lifting.com Rigging Tools 133

    Rigging Tools

    RIG

    GIN

    GTO

    OLS

    For Vertical Lifting, Turning and Transfer Available in capacities of .5 thru 30 metric tons (Higher Working Load Limits are available upon request). Wide variety of jaw openings available: 0 to 6.10. Welded alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body. Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial

    number is included on the test certificate with maintenance and warranty logbook. Available in a variety of styles: IP10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB). IP10J - Larger jaw opening. IP10S - For use with Stainless Steel material. IP10H - For use with materials with a surface hardness to 47Rc (450 HB). Full 180 turning range for material transfer, turning or moving. Lock open, lock closed ability with latch for pretension on material and then release of material. Optional IP-5000 Stinger assembly available (see page 420). Allows for easy connection between the clamp and

    hoist hook. Minimum WLL of 10% of Maximum WLL. Maintenance replacement kits are available. Manufactured by a ISO 9001 facility. All sizes are RFID EQUIPPED.

    The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180) as needed. Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines.

    IP10

    Model IP10

    Model

    WorkingLoad Limit(t)*

    IP10StockNo.

    WeightEach(lbs.)

    Dimensions(in.)

    Jaw A B C D E F G H J KIP10 0.5 2701674 3.97 0 - .63 1.73 5.04 8.15 1.18 4.53 1.61 1.10 - .39IP10 1 2701662 4.85 0 - .75 1.77 5.47 8.46 1.18 4.96 1.61 1.50 - .39IP10 2 2701676 16.8 0 - 1.38 3.07 7.91 13.23 2.76 7.48 2.40 2.17 - .63IP10 3 2701664 30.4 0 - 1.56 3.94 9.96 17.17 2.95 8.86 3.07 2.36 - .79IP10 4.5 2701666 33.1 0 - 1.56 3.94 9.96 17.17 2.95 9.13 3.23 2.56 - .79IP10 6 2701668 51.9 0 - 2.00 4.96 11.89 20.28 3.15 11.50 3.31 3.74 1.57 .79

    IP10/J 6 2701705 62.9 2.00 - 4.00 4.96 11.89 20.28 3.15 13.46 3.31 3.74 1.57 .79IP10 9 2701670 60.7 0 - 2.00 4.96 12.80 21.65 3.15 12.20 3.62 4.13 1.73 .79

    IP10/J 9 2701672 62.9 2.00 - 4.00 4.96 12.80 21.85 3.15 14.17 3.62 4.13 1.73 .79IP10 12 2701678 108 0 - 2.13 6.30 15.39 22.83 3.16 13.03 4.61 5.39 1.61 .98

    IP10/J 12 2701680 128 2.13 - 4.25 7.01 17.28 24.80 3.15 16.34 4.61 5.39 1.61 .98IP10 16 2701682 150 .25 - 2.50 7.01 18.31 27.17 3.46 15.63 4.69 6.02 1.93 .98

    IP10/J 16 2701684 199 2.50 - 5.00 8.19 20.51 29.37 3.46 18.58 4.69 6.34 1.93 .98IP10 22.5 2701686 238 .25 - 3.13 8.74 21.81 31.50 4.33 18.50 5.35 7.32 1.93 .98

    IP10/J 22.5 2701688 243 3.13 - 6.10 9.96 24.72 34.65 4.33 22.64 5.35 7.72 1.93 .98IP10 30 2701690 327 .25 - 3.13 8.74 21.46 31.50 4.33 18.50 5.98 7.32 2.13 1.18

    IP10/J 30 2701692 335 3.13 - 6.10 9.84 24.41 34.65 4.33 22.24 5.98 7.72 2.13 1.18For stainless steel - with fixed hoisting eye

    IP10/S 0.5 2702274 3.97 0 - .63 1.73 5.04 8.15 1.18 4.53 1.61 1.10 - .39IP10/S 1 2702262 4.41 0 - .75 1.77 5.47 8.46 1.18 4.96 1.61 1.50 - .39IP10/S 2 2702276 15.0 0 - 1.38 3.07 7.91 13.23 2.76 7.48 2.40 2.17 - .63IP10/S 3 2702264 30.5 0 - 1.56 3.94 9.96 17.17 2.95 8.86 3.07 2.36 - .79IP10/S 4.5 2702266 33.1 0 - 1.56 3.94 9.96 17.17 2.95 9.13 3.23 2.56 - .79IP10/S 6 2702268 51.9 0 - 2.00 4.96 11.89 20.67 3.15 11.50 3.31 3.74 1.57 .79IP10/S 9 2702270 60.7 0 - 2.00 4.96 12.80 21.93 3.15 12.20 3.62 4.13 1.73 .98IP10/S 12 2702278 108 0 - 2.13 6.30 15.39 24.53 3.15 13.03 4.61 5.39 1.61 .98

    For very hard materials - with fixed hoisting eyeIP10/H 0.5 2702174 3.97 0 - .63 1.73 5.04 8.15 1.18 4.53 1.61 1.10 - .39IP10/H 1 2702176 15.0 0 - 1.38 3.07 7.91 13.23 2.76 7.48 2.40 2.17 - .39IP10/H 2 2702164 30.4 0 - 1.56 3.94 9.96 17.17 2.95 8.86 3.07 2.36 - .63IP10/H 3 2702166 33.1 0 - 1.56 3.94 9.96 17.17 2.95 9.13 3.23 2.56 - .79IP10/H 4.5 2702168 51.9 0 - 2.00 4.96 11.89 20.28 3.15 11.50 3.31 3.74 1.57 .79IP10/H 6 2702170 60.7 0 - 2.00 4.96 12.80 21.65 3.15 12.20 3.62 4.13 1.73 .98

    * Design Factor based on EN 13155 and ASME B30.20.

    Vertical Lifting Clamp

  • www.Lifting.comRigging Tools 134

    Rigging Tools

    RIG

    GIN

    GTO

    OLS

    For use in almost all sectors of industry where during the lift or transfer, no damage to the material is permitted.

    Available in capacities of .5 , 1 and 2 metric tons. Wide variety of jaw openings available: 0 to 1.50 Welded alloy steel body for strength and smaller size. Forged alloy

    components, where required. Individually Proof Tested to 2 times the Working Load Limit

    with certification. Company name (CrosbyIP), logo, Working Load Limit and jaw opening

    permanently stamped on body. Each produc