RFS In-Building Solutions

Your unrivaled partner for high-performance indoor solutions

T h e C l e a r C h o i c e ®

RADIO FREQUENCY SYSTEMS

RFS IN-BUILDINGS DAS 16pp BROCHURE®_Layout 1 30/04/2013 16:03 Page 1

Two major trends drive theneed to deploy a dedicatedwireless in-buildingcommunications solution:

Peoples’ behaviors

New network technologies

3

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

2

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

People are in buildings,consuming more data

Networks andbuildings are evolving

Multi-band,multi-technology,multi-operator support

High quality andreliability

Today, people spend most of their time inbuildings — at home, at work, in shoppingmalls and entertainment venues. Evenwhen traveling, people spend much oftheir time in buildings.

While indoors, people are constantly usingsmartphones and tablets to stay in touch,entertain themselves and complete worktasks. The increasing demand for wirelessservices — particularly data services —from within buildings is pushing macronetworks to exhaust.

Wireless in-building solutions bring thenetwork inside the buildings where peoplespend their time. People enjoy access touninterrupted wireless services andoperators can address network challenges.Dedicated in-building solutions:

Improve capacity and coverageindoors

Offload the outdoor macronetwork

Enable more efficient use of theavailable spectrum

Support commercial andmission-critical communicationsrequirements

Solutions are transparent from a radiofrequency (RF) perspective:

A single passive DAS solution canbe shared by multiple operatorsthat deliver different commercialand mission-critical wirelessservices using differenttechnologies and frequency bands.

Operators and frequencies can beadded or changed to support newmacro network providers ortechnologies, including 4G LTE.

DAS solutions are radio accessnetwork (RAN) vendor-agnostic.

All solution components deliverhigh-quality and highly reliablecommercial and mission-critical wirelessservices in buildings:

RF cables combine flexibility andstrength with low attenuationand high power ratings.

Non-cable components maintainoverall system performance andkey performance characteristicssuch as passive intermodulation(PIM) performance.

RF-over-fiber repeaters can beused to reamplify signals overlong distances.

Cable materials and construction are allthoroughly tested to ensure they meetnational, regional and local fire andflame-retardant specifications.

A complete partner

RFS provides professional services to helpcustomers deploy passive DAS solutionsthat are optimized for cost andperformance. RFS can assist customerswith specific stages of design anddeployment or provide a turnkey solution.

Passive distributed antenna system (DAS) solutionsfrom Radio Frequency Systems (RFS) deliver all of thecapabilities needed to give people better access towireless services in buildings while meeting technicaland financial requirements.

Advanced wireless technologies such asUMTS and 4G LTE give people access tothe speeds needed to consume vastquantities of data. However, they areoften delivered at high frequencies thatdon’t penetrate buildings well. Adding tothe challenge, modern buildings areoften constructed with reinforcedconcrete and steel that resist wirelesssignal penetration.

Wireless in-building solutions solve thesechallenges by taking networktechnologies within building walls.However, in-building solutions only maketechnical and financial sense if they:

Support multiple frequencybands, network technologiesand operators

Reduce total cost of ownership(TCO)

Provide highly reliablecommunications

Comply with safety regulations

Bringing wireless networkscloser to people

More than 80% of allwireless voice anddata communicationsbegin indoors.

Paris Charles De Gaulle airport

Once installed, solutions require almost no maintenance and consume no electricity.

This keeps costs down and ensures error-free operation and high system availability— key requirements for mission-critical services.

Low TCO

Built for complianceand safety

RFS IN-BUILDINGS DAS 16pp BROCHURE®_Layout 1 30/04/2013 16:03 Page 2

5

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

4

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

RFS passive DAS solutionsare ideal for mid andlarge-sized buildings of alltypes, including:

Apartments, condominiumbuildings and hotels

Airport terminals and trainstations

Office and industrialcomplexes

Shopping malls

Stadiums and arenas

Hospitals

School campuses

Conference centers

Public buildings such asmuseums, art galleries,concert halls and libraries

Wireless in-building solutionstailored for your needs

DC Directional Coupler

PS Power Splitter

CN Combining Network Omnidirectional antenna

CELLFLEX or CELLFLEX Lite cable

RADIAFLEX cable

The Louvre Museum

Flexible designs for commercial and mission-critical communications

Any complexity, any businessmodel. Solutions can be designedto support simple environmentswith a single operator, service andfrequency or highly sophisticatedenvironments with multipleoperators, services and frequencies.Services supported can include anycombination of:

• Cellular wireless services based on 2G, 3G and 4G technologies

• Analog and digital security and emergency services

• Wireless LAN (WLAN) services based on 802.11 standards

• Paging services

Frequency bands and mobile standards

Every RFS passive DAS solution is purpose-built to match business objectives, applicationrequirements and physical environment.

Any population, any capacitytrend. Solutions can be designedto meet capacity requirementsranging from peak-timerequirements in apartmentbuildings to large bursts ofsimultaneous communications atevent venues to consistentlyhigh volumes of data traffic inoffice buildings.

Any room size, any layout.Solutions can be designed forbuildings with different roomsizes, numbers of floors andlayouts, includingunderground areas. Whateverthe physical environment, RFScombines antennas andradiating cables in the waythat best optimizes thetechnical solution and the cost.

RFS offers the widest range of 2G (GSM/TDMA/CDMA), 3G (UMTS/cdma2000) and4G (LTE/WiMAX) antenna solutions for network deployment, designed for greenfieldplayers and existing operators alike.

RFS wireless in-building solutions includeall of the components needed to deployan end-to-end passive DAS:

CELLFLEX® and CELLFLEX® Litelow-loss foam dielectriccoaxial cables

High-performance RADIAFLEX®

radiating cables

Broadband and ultra-broadbandindoor antennas

High-quality connectors thatmaintain system performance

Broadband and ultra-broadbandindoor combiners, couplers andsplitters with low insertion loss

Complete wirelessin-building solutions

RFS IN-BUILDINGS DAS 16pp BROCHURE®_Layout 1 30/04/2013 16:03 Page 4

7

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

6

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

Designed to address thetoughest technical challenges

RFS is recognized around the globe for its dedication to designingand manufacturing reliable, high-performing and long-life products.

Flame andfire-retardant cables

LTE and MIMO supportpave the way fornetwork evolution

Fiber-optic extensionsfor the most demandingin-building requirements

High-performancehead-end combiningnetworks

Combining network performancestrongly influences the quality of up-linkand down-link transmissions.

RFS provides the expertise, experienceand technical components required tocombine a single service per frequencyband or multiple services per frequencyband and multi-band applications withthe highest quality levels. For complexcombining networks, we offercustomized components that aredeveloped or adapted to meet the uniquerequirements of particular applications.

Multiple input multiple output (MIMO)antenna technology increases LTE capacity.However, due to its electricalcharacteristics, MIMO can also createsignal propagation challenges in buildings.

RFS passive DAS solutions are LTE-readyand designed to support MIMOtechnology. Our technical expertsunderstand:

When, where and how to installtransmit antennas forcontinuously high signal integrity

What levels of signal-to-noiseratio (SNR) are needed forimproved data rates

How to cost effectively scale thesolution to ensure a high-performing solution does notbreak the budget

All RFS cables meet InternationalElectrotechnical Commission (IEC),European Standard (EN) and Associationfor Electrical, Electronic and InformationTechnologies (VDE) standards for:

Halogen-free and non-corrosivejacket tests

Flame tests

Cable bundle tests

Low-smoke emission tests

RFS plenum-rated cables for the NorthAmerican market are CATVP-rated, withlow flame-spread and low-smokecharacteristics. They are also testedaccording to US National Fire ProtectionAgency (NFPA) testing method 262,ensuring they meet the most stringentflame-retardant and smoke-suppressantrequirements.

“There are a number ofcable manufacturers; thechallenge is finding onethat offers consistenttechnical performance andreliability, while alsoproviding an economicalsolution. RFS excelled in allof these areas.”

Joe Mullin, Vice President ofEngineering and Operations

at InSite Wireless

Truly broadbandsolutions

RFS solutions support services infrequency bands ranging from 380 MHzto 6 GHz. They are particularly well suitedto distribution of cellular services in the698 MHz to 2700 MHz frequency range.

To ensure highly reliable and availablewireless services in all areas of the building,RFS provides RF-over-fiber repeater systemswhere needed. These high-capacity signaldistribution systems support 2G, 3G, 4Gand TETRA communications in bandsranging from 380 MHz to 2700 MHz.

Low PIM is crucial for high performancein passive components and clear signalsacross passive DAS solutions.

RFS focuses on keeping PIM values as lowas possible in every area of the RF chain:

Solution components are designedwith corrosion-resistant materials,water-tight sealing, andmulti-threaded connectors for fastand easy tightening.

Stringent manufacturing processesensure high-quality welds, robustconnections and no contamination.

PIM performance in finishedcomponents is validated againstinternational standards.

Solution components are subjectedto harsh environmental tests toensure corrosion resistance.

Installation processes arestraightforward to reduce errorsand vulnerabilities.

Installation tools enable precise,repeatable installations.

Low PIM in all in-building products

RFS IN-BUILDINGS DAS 16pp BROCHURE®_Layout 1 30/04/2013 16:03 Page 6

9

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

8

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

Choosing the right cables and connectors for your in-building applications

RADIAFLEX®

high-performanceradiating cables

RADIAFLEX® is the world’s leading “leakyfeeder” cable solution. Designed todeliver contoured indoor RF coverage,RADIAFLEX® cables provide a scalable andpractical means of tailoring RF coverage ineven the most confined in-buildingspaces. Where required, corrugated outerconductors and small bending radiiprovide the flexibility needed for easyinstallation in any indoor environment.

Broadband solutionRADIAFLEX® cables support all majorservices up to 6 GHz, making them idealfor multi-operator and multi-bandapplications in challenging locations suchas parking garages, tunnels and mines.

Extensive application support

Wireless telephony, including 2G,3G, and 4G LTE

WLAN

Mission-critical communications

Trunked radio

Flame and fire retardantRADIAFLEX® cables are low-smoke andhalogen-free to meet all majorinternational flame- and fire-retardancystandards.

Low lossRADIAFLEX® cables offer low longitudinalloss and are available in low coupling-lossvariants that are specifically designed forbuilding and tunnel applications.

RFS plenum-rated wideband cables forthe North American market deliveroutstanding electrical performance andsupport all wireless in-buildingapplications. These air dielectric coaxialcables are thoroughly tested for safe usewithin the “environmental air handlingspace” in ceilings as well as in moretraditional plenum applications.

RFS plenum-rated cables:

Support technologies andapplications in bands rangingfrom 380 MHz to 6000 MHz.

Feature conductor designs thatcreate a continuous RFI/EMI shieldto minimize system interferenceand virtually eliminateintermodulation.

Offer low attenuation,outstanding heat transferproperties and temperature-stabilized dielectric materials.

RFS in-building jumpers are pre-terminatedin the factory instead of manuallyterminated in the field to increaseperformance, save installation time, reducehuman error and, ultimately, save money.Our in-building jumpers feature:

Factory-fit, soldered on connectorsfor the best possible PIM andVSWR performance.

Plenum-rated, flame-retardant,low-flame spread, low-smokejackets that comply with thehighest in-building standards forflame and fire retardance.

A continuous star-dielectricspline for uniform support andfewer electrical and mechanicalbending challenges in tightbending situations.

Markets and applications Cable types Cable models Connector options

In-building Low coupling-loss radiating RLK series RADIAFLEX® connectors(all countries, except in North America)

In-building with stringent fire codes Plenum-rated air dielectric ICA12-50JPL, ICA12-50JPLW Standard and premium CELLFLEX® connectors

In-building with no plenum requirements Flame-retardant foam dielectric LCF12-50JFN Standard and premium CELLFLEX® connectors

Mining safety and Mine Safety & Health Flame-retardant foam dielectric LCF12-50JFN, LCF78-50JFN Standard and premium CELLFLEX® connectorsAdministration (MSHA) Corrugated, milled radiating RCF12-50JFN Standard and premium CELLFLEX® connectors

In-vehicle Flexible, corrugated radiating RSF series Standard and premium CELLFLEX® connectors

In-tunnel Flame-retardant radiating RLK series, RLF series, RAY series RADIAFLEX® connectors

Metro and railway stations Low coupling-loss radiating RLK series RADIAFLEX® connectors

Oil and gas platforms Corrugated, milled radiating RCF12-50JFN Standard and premium CELLFLEX® connectors

Ships Low coupling-loss radiating RLK series RADIAFLEX® connectors

Clearfill® LinePlenum-rated cablesfor North America

Plenum-rated and flame-retardant,factory-fit jumpers

The RFS line of OMNI FIT™ connectors includes premium connectors for PIM-criticalapplications and standard connectors for typical requirements and optimized rollout costs.

For convenience, RFS OMNI FIT™ connectors can be used with CELLFLEX®, CELLFLEX® Liteand corrugated RADIAFLEX® cables. In addition, single-piece, easy-to-install RADIAFLEX®

connectors are available for RADIAFLEX® cables with flex foil outer conductors.

Cable preparation tools are available to ensure easy and precise installation; connectorscan be re-installed when necessary to avoid waste.

Standard and premium- performance connectors

RFS coaxial and radiating cables are designed to meet in-building communications requirementstoday and tomorrow. High-quality connectors maintain signal integrity end-to-end.

CELLFLEX® Lite lightweightaluminum cables

Outstanding intermodulationperformanceThe solid inner and outer conductorsvirtually eliminate intermodulation.

High power ratingLow attenuation, excellent heat transferproperties and temperature stabilizeddielectric material ensure a safe long-termoperating life at high transmit power levels.

Wide range of applicationsCELLFLEX® cables support frequency bandsup to 6000 MHz to enable a wide range ofin-building applications.

CELLFLEX® low-losscopper cables

CELLFLEX® foam dielectric cables combineflexibility with strength and electricalperformance to ensure uninterruptedcommunications throughout buildings.

Low attenuationLow attenuation enables extremelyefficient signal transfers.

Complete shieldingThe solid outer conductor creates acontinuous shield against radio frequencyand electromagnetic interference (RFI/EMI)to minimize system interference.

Low VSWRSpecial low voltage standing wave ratio(VSWR) CELLFLEX® variants help maintainsystem integrity.

CELLFLEX® Lite aluminum cables are thelightest RF transmission cables on themarket today. They are specificallydesigned for fast, easy and cost-effectivecable installations. CELLFLEX® Lite cablescombine an innovative corrugatedaluminum outer conductor design with:

Single and multiple bending radiias per industry standards

Robust construction

Advanced electrical performance

An attractive entry price point

Cables and connectors for every in-building application

RFS IN-BUILDINGS DAS 16pp BROCHURE®_Layout 1 30/04/2013 16:04 Page 8

11

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

10

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

Broadband and ultra-broadbandindoor antennas

Passive system components,accessories and tools

RFS passive system components providemaximum flexibility and optimum electricalperformance.

Combiners support one service perfrequency band, multiple servicesper band, and multi-bandapplications. RFS also offersstandardized combiner modules in19-inch rack technology.

Hybrid combiners and hybridcouplers combine multiple signalsin the same wireless band to acommon feeder cable.

Directional couplers and tappersuniformly distribute RF signals.

Diplexers and triplexers combineand separate signals in differentwireless bands.

DC blocks prevent the flow ofdirect current and low-frequencycurrent surges along the inner andouter conductors of a transmissionline, while permitting theunimpeded flow of RF signals.

Power splitters evenly split inputsignals with minimal reflectionsor loss.

Loads terminate all types of openRF ports.

Attenuators adapt RF power levelsto meet different systemrequirements.

RFS cable accessories ensure installationintegrity and safety over the long term:

Clamps and cable ties hold cablessecurely without affecting cableperformance.

Cable hangers ensure each cabletype is installed the right distancefrom the wall or ceiling.

Grounding kits provide secure,low-resistance contact to the cableouter conductor for reliableovervoltage protection withoutmechanical deformation to ensurethe electrical transmission is not degraded.

RFS installation tools simplify installationprocedures and reduce the risk of errors:

Automated trimming toolsdesigned specifically for RFS cablesensure cables are properlyprepared for connectorattachment.

Stripping tools ensure outerconductors are properly preparedfor connection to grounding kits.

Cable tie adjustment toolsaccelerate cabling procedures.

Cable accessories Installation tools

A complete portfolio of passive system components andaccessories completes your wireless in-building solution.

Passive systemcomponents

Omnidirectional Bidirectional

Panel Directional

Performance, design, versatility

All RFS indoor antennas are designed forhigh performance and low visual impact.Antennas can be mounted on walls orceilings. Antennas and the cablesconnecting them can also be painted tomatch surrounding colors and blend intothe building aesthetic.

RFS indoor antennas feature:

Sealed, UV-stable radomes

Low VSWR, high gain, stableperformance

Compact, lightweight designs

RFS provides four types of indoorantennas to meet every in-buildingrequirement:

Omnidirectional

Panel

Directional

Bidirectional

RFS passive DAS solutionsincorporate indoorantennas that support 2G,3G and 4G cellular, Wi-Fi,WLAN, TETRA, DVB-H andWiMAX services infrequency bands rangingfrom 350 MHz to 6000MHz. Broadband,ultra-broadband andPIM-rated indoorantennas are available forlong-life solutions.

RFS IN-BUILDINGS DAS 16pp BROCHURE®_Layout 1 30/04/2013 16:04 Page 10

13

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

12

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

Leading organizations aroundthe world rely on RFS wirelessin-building solutions

Venetian MacauResort bets on RFSfor large-scalein-building coverage

RFS designed andsupplied a distributedantenna network forboth the 3000-roomhotel and the 50,000square meter (538,000 sqft) casino and gamingspace within the opulentVenetian Macau Resort.The RFS solutionconsisted of 3,000point-source antennasand 500 indoor antennaslinked together withCELLFLEX® foamdielectric coaxial cable.The expandable systemcurrently supports CDMA800 MHz, GSM 900 MHzand GSM 1800 MHzcommercial services, aswell as TETRA service forinternal and securitycommunications.

Dublin stadium takesmulti-operator,multi-technologycoverage indoors

RFS delivered a turnkeyshared distributionsystem for use by themultiple operatorsproviding wirelessservices to Aviva Stadiumin Dublin, Ireland. Thesolution, which includesomnidirectional andpanel indoor antennas,supports GSM 1800 andUMTS services withmultiple carriers persector. It can be easilyupgraded to provideGSM 900 and WLANservices in the50,000-seat stadium.

A turnkey,multi-operatorsolution for “indoorcity” in Brazil

Thanks to RFS, the17,000 employees and5,000 to 10,000 dailyvisitors to the 5-bulidingMinas Gerais governmentcomplex in BeloHorizonte, Brazil, nowenjoy uninterruptedwireless coverageindoors. Spanning morethan 800,000 squaremeters of office space,the RFS solution takes 2Gand 3G wireless coveragewithin the reinforcedconcrete walls of thewell-known complex. Thesolution is shared amongfour operators andsupports GSM and UMTStechnologies in the 850MHz, 1800 MHz and2100 MHz frequencybands.

Indoor coverage formajor Pan Am Gamessites in Rio de Janeiro

RFS supplied the RFdistribution system forfive major sites used inthe 2007 Pan AmericanGames in Rio de Janeiro— the Maracanãcomplex, the RiocentroExhibition andConvention Center, theMiécimo da Silvacomplex, the Autódromoand the João Havelangecomplex. The turnkeyproject provided GSM900, GSM 1800 andUMTS 2100 coverage fortwo Brazilian operators. Itincluded a triple-band,fiber-fed solution andremote management andsupervision for fiber-fedrepeaters.

California stadiumreuses existingnetwork for cellularcommunications

To keep the costs ofdeploying in-buildingcoverage at California’sHome Depot CenterStadium down, RFShelped Verizon Wirelessengineer a solution thattakes advantage of theradiating cable networkused for the stadium’sUHF-based securitysystem. With ahigh-performance,band-specificbidirectional amplifier(BDA) from RFS added tothe existing solution,visitors to the 50-hectare(125-acre) stadiumcomplex now enjoy signalquality exceeding 80 dBmin 99.9 percent ofstadium locations.

European CentralBank brings 3Gcoverage to its twonew towers

RFS’ CELLFLEX® low-lossfoam dielectric cables,splitters and accessoriesare being used to bring3G communications tothe new EuropeanCentral Bank (ECB)premises in Frankfurt amMain, Germany. Thein-building solution spansthe two 45-floor ECBtowers and will be usedby multiple Germanoperators. BecauseCELLFLEX® cables arehighly flexible andeasy-to-install, they werethe ideal solution for thebuildings’ limitedinstallation space.Installation training fromRFS ensured smoothdeployment.

Quinnipiac Universityin the US enablesanytime, anywherecommunications

With wireless in-buildingdesign services andcoverage solutions fromRFS, Quinnipiac Universityin Hamden, Connecticut,was able to bring seamlesswireless communicationsto students and staff. Theneutral-host solutionprovides in-buildingcellular coverage acrossthe academic buildings,residence halls and sportsfacilities on the 109hectare (270-acre)campus. The Universitybuildings now featureexcellent cellularreception, location-basedservices and support forcommunity applicationsfor class work andfaculty-studentmessaging.

Cyprus airport bringswireless services toultramodern airportterminal

RFS provided mobileoperators MTN Cyprusand Cyta with a completeactive indoor wirelesssolution that ensuresLarnaca InternationalAirport’s travelers andpersonnel can connect toworld-class mobileservices. A vital elementof the ultramodernairport terminal, thesophisticated wirelessin-building systemprovides GSM and UMTScoverage and is ready todeliver TETRA, Wi-Fi andWiMAX access.

Fully passivein-building solutionsfor Brazil’s twobusiest airports

Brazilian operators choseRFS to design, implement,test and project managesolutions for in-buildingGSM 1800, GPRS, EDGEand UMTS 2100 wirelesscoverage in GuarulhosInternational Airport andCongonhas Airport, SãoPaulo, Brazil. The fullypassive solutions are alsoready to support Wi-Fi inthe 800 MHz to 2500MHz range.

Leading undergroundcommunicationsspecialists rely onRADIAFLEX

Mining communicationsspecialists PillarInnovations and BeckerElectronics based theirturnkey wirelesscommunications systemon RFS’ RADIAFLEX®

radiating cable. As one ofthe first radiating cablesto obtain US Mine Safetyand Health Administration(MSHA) certification,RADIAFLEX® is ideal forbelow- and above-ground miningenvironments.RADIAFLEX®-basedcommunications systemshave been deployed inmajor mines in the USand South Africa.

RFS IN-BUILDINGS DAS 16pp BROCHURE®_Layout 1 30/04/2013 16:05 Page 12

15

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

14

RFS

IN-B

UIL

DIN

G S

OLU

TIO

NS

Radio Frequency Systems (RFS) is a global designer andmanufacturer of cable,antenna and tower systemsalong with active and passiveRF conditioning modules,providing total-packagesolutions for wireless andbroadcast infrastructure.

RFS serves OEMs, distributors,systems integrators, operatorsand installers in the broadcast,wireless communications,land-mobile and microwavemarket sectors.

As an ISO-compliantorganization withmanufacturing andcustomer-service facilities thatspan the globe, RFS offerscutting-edge engineeringcapabilities, superior fieldsupport and innovative product design.

Why RFS?An experienced partner witha proven track record

Services to complement yourin-building solution

In addition to supplying all of the products and solutions neededto enable a broad range of wireless in-building communications,RFS has extensive experience providing professional services —from a single service to full turnkey solutions for mission-criticaland commercial wireless services in buildings. RFS’ turnkeysolutions include all of the essential services described here.

ConsultingHelping customers choose the righttechnologies, deployment strategy andproducts for each application.

Site surveySetting the stage for successfuldeployments.

System designLeveraging our broad experience and deeptechnical expertise.

Project managementKeeping complex, multi-providerdeployments on-schedule and on-budget.

SupervisionEnsuring sub-contractors meet stringentspecifications for quality and timeliness.

InstallationFocusing on efficient and cost-effectivedeployments.

CommissioningGetting new solutions up and runningwithout delay.

Acceptance testingProving new solutions meet specificrequirements and KPIs.

TrainingProviding personnel with the knowledgerequired for smooth daily operations.

MaintenanceReducing the risk of failures and systemdowntime.

With RFS as theirstrategic partner,customers enjoy thefreedom and flexibilityto choose the product,solution and servicecombination that bestmeets their businessobjectives.

RFS has more than 40 years of experience delivering reliable in-building solutions to customersaround the world. As one of the major players in the marketplace, RFS has the portfolio, strengthand size to become a long-term partner

Argentina

• Torre Maderobuilding

Belgium

• Brussels InternationalAirport

Brazil

• Congonhas Airport

• CAMG complex

• GuarulhosInternational Airport

• Maracaña Stadium

• Petrobras oilplatforms

China

• East China Sea oilplatforms

Cyprus

• Cyprus Airport

France

• Alcatel-Lucentheadquarters

• Orly Airport

• Roissy Charles deGaulle Airport

Germany

• Berlin InternationalAirport

• Frankfurt Airport

• Tübingen Hospital

• Volkswagen plant

Hong Kong

• Convention andExhibition Center

Iceland

• Icelandic DamWater Plant

Mexico

• Princess HotelAcapulco

Netherlands

• Leiden Hospital

Norway

• North Sea oilplatforms

Saudi Arabia

• Oil caverns

Singapore

• Metropolitan AreaNetwork

South Korea

• KOEX exhibitionbuilding

South Africa

• Gold mines

Spain

• Madrid Airport

United Kingdom

• London OlympicVillage

• Ireland Intel plant

USA

• Americas Mart

• Beaumont Hospital

• Boston Marriot Hotel

• Bridgestone Arena

• Coal mines

• Dallas Cross CenterBuilding

• Grand Ole OperaHotel

• Home Depot Stadium

• LP Field

• Lucas Oil Stadium

• M & T Bank Stadium

• New Orleans CTIAExhibition

• Princeton University

• Qualcomm Stadium

• Quinnipiac University

• SNET Headquarters

RFS IN-BUILDINGS DAS 16pp BROCHURE®_Layout 1 30/04/2013 16:05 Page 14

RADIO FREQUENCY SYSTEMST h e C l e a r C h o i c e ®

www.rfsworld.com

For more information, please contact thenearest RFS sales office:

Southern Europe, Middle East, Africa & Indiawww.rfsworld.com/sales/semeai

Northern Europewww.rfsworld.com/sales/euno

Latin Americawww.rfsworld.com/sales/latam

North Americawww.rfsworld.com/sales/na

Asia Pacificwww.rfsworld.com/sales/apac

© R

adio

Fre

qu

ency

Sys

tem

s -

05/2

013

RFS IN-BUILDINGS DAS 16pp BROCHURE®_Layout 1 30/04/2013 16:05 Page 16