RFS APX Antenna

APXV86-90* Series Optimizer Broadband AntennasPolarization: Dual 45 Electrical Downtilt: Adjustable Horizontal beamwidth: 65 or 90 Broadband Tilt range 10

806-960 MHz

ApplicationsThis innovative range of broadband variable tilt antennas are crosspolarized available in 65 or 90 degree horizontal beamwidths for use in the following systems: Trunking / SMR (806-824, 851-869MHz) Cellular (824-849, 869-896 MHz) GSM 900 / ETACS (872-915, 917-960MHz) Trunking (896-901, 935-940MHz) These high performance antennas have excellent upper sidelobe suppression, VSWR and front to back ratio. The antennas are available in a variety of gain options varying from 15.2 to 18.2dBi covered by an UV resistant fiberglass radome. Having continuously adjustable electrical downtilt over the range of 0 to 10. These antennas have two 7-16 connectors mounted at the bottom and are designed for use with our new APM40 Global Mount system / APM70-3C cluster kit. As with all our variable tilt antenna range they can be upgraded using our OPTIMIZER RT system for remote tilt control.

BASE STATION ANTENNAS

2

Features & Benefits Constant performance across frequency band for all tilt values At least 30 dB isolation between polarizations High gain Stable horizontal and vertical beamwidths Excellent upper sidelobe suppression Very low beam squint Effective polarization diversity ensured by high cross polar discrimination Broadband design Low wind load Optional remote tilt can be retrofitted-120 -90 -60 30 20 90 120 60

APXV86-90* Series90 120 60

30

30

10

3

0

30

20

10

3

0

-30

-30

-120 -90

-60

Vertical Pattern

Horizontal Pattern

Performance Optimization TechniquesFighting co-channel interferences is key to improving network performances. A tight control of the coverage by adjusting downtilt to the optimum value helps reducing co-channel interferences.Horizon10 8

20 m

5

2.0

110 m 138 m 22 0 m 550 m

Effect of adjustable antenna downtilt on tight coverage control

121

www.rfsworld.com

APXV86-90* Series Optimizer Broadband AntennasAPXV86-906513L-CHorizontal Beamwidth, deg 65 Gain, dBi 14.7 Electrical Downtilt, deg 0-10 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 67 16 14.4 (12.3) > 18 > 25 < 1.5:1 > 30 500 Dual pol +/-45 > 150 1350 x 330 x 130 (53.15 x 13 x 5.12) 200 (125) 0.45 (4.81) 160 (100) 685 (154) 685 (154) Aluminum Brass Fiberglass Light Grey RAL7035 14 (30.8) 1.5 x 0.4 x 0.25 (4.95 x 1.32 x 0.83) 1520 x 400 x 250 (59.84 x 15.75 x 9.84) < 1.4:1 870-960 63 15 15 (12.9) > 18

806-960 MHz

2

MECHANICAL SPECIFICATIONSDimensions - HxWxD, mm (in) Survival Wind Speed, km/h (mph) Max Wind Loading Area, m (ft) Rated Wind Speed, km/h (mph) Maximum Thrust @ Rated Wind, N (lbf) Front Thrust @ Rated Wind, N (lbf) Reflector Material Radiating Element Material Radome Material Radome Color Weight w/o Mtg Hardware, kg (lb) Packing Dimensions - HxWxD, m (ft) Packing Dimensions, HxWxD, mm (in)

Vertical Pattern

Horizontal Pattern

APXV86-906513T-CHorizontal Beamwidth, deg 65 Gain, dBi 14.7 Electrical Downtilt, deg 4-14ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 67 16 14.4 (12.3) > 16 > 25 < 1.3:1 > 30 500 Dual pol +/-45 > 150 1350 x 330 x 130 (53.15 x 13 x 5.12) 200 (125) 0.45 (4.81) 160 (100) 685 (154) 685 (154) Aluminum Brass Fiberglass Light Grey RAL7035 14 (30.8) 1.5 x 0.4 x 0.25 (4.95 x 1.32 x 0.83) 1520 x 400 x 250 (59.84 x 15.75 x 9.84) 870-960 63 15 14.8 (12.7) > 18


Vertical Pattern

Horizontal Pattern 122

www.rfsworld.com

APXV86-90* Series Optimizer Broadband AntennasAPXV86-906515-CHorizontal Beamwidth, deg 65 Gain, dBi 16.7 Electrical Downtilt, deg 0-10

806-960 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 65 10 16.1 (14.0) > 17 (typ >20) > 25 < 1.5:1 > 30 500 Dual pol +/-45 > 150 2080 x 330 x 130 (82 x 13 x 5.12) 200 (125) 0.7 (7.53) 160 (100) 1050 (236) 1050 (236) Aluminum Brass Fiberglass Light Grey RAL7035 18.5 (40.7) 2.3 x 0.4 x 0.25 (7.6 x 1.32 x 0.83) 2255 x 400 x 250 (88.8 x 15.8 x 9.8) > 30 9 16.7 (14.6) 870-960

2Vertical Pattern


Horizontal Pattern

APXV86-906516-CHorizontal Beamwidth, deg 65 Gain, dBi 17.5 Electrical Downtilt, deg 0-10ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 66 8 16.5 (14.3) >18 all (Typically >20) > 26 < 1.4:1 > 30 500 Dual pol +/-45 > 150 2600 x 330 x 130 (101 x 13 x 5.12) 200 (125) 1.16 (12.11) 160 (100) 1430 (321) 1430 (321) Aluminum Brass Fiberglass Light Grey RAL7035 27 (59.4) 2.77 x .40 x .26 (9.08 x 1.31 x 0.85) 2770 x 400 x 260 (109 x 15.75 x 10.2) 870-960 63 7 17.5 (15.3)30 20 10 3 0 90 120 60

30

-30

-120 -90

-60

MECHANICAL SPECIFICATIONSDimensions - HxWxD, mm (in) Survival Wind Speed, km/h (mph) Max Wind Loading Area, m (ft) Rated Wind Speed, km/h (mph) Maximum Thrust @ Rated Wind, N (lbf) Front Thrust @ Rated Wind, N (lbf) Reflector Material Radiating Element Material Radome Material Radome Color Weight w/o Mtg Hardware, kg (lb) Packing Dimensions - HxWxD, m (ft) Packing Dimensions, HxWxD, mm (in)120

Vertical Pattern90 60

30

30

20

10

3

0

-30

-120 -90

-60


www.rfsworld.com

APXV86-90* Series Optimizer Broadband AntennasAPXV86-909014-CHorizontal Beamwidth, deg 88 Gain, dBi 15 Electrical Downtilt, deg 0-10 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 88 9.5 15.0 (12.9) > 18 > 25 < 1.5:1 > 30 500 Dual pol +/-45 > 150 2080 x 330 x 130 (81.89 x 13 x 5.12) 200 (125) 0.7 (7.53) 160 (100) 1050 (236) 1050 (236) Aluminum Brass Fiberglass Light Grey RAL7035 18.5 (40.7) 2.3 x 0.4 x 0.25 (7.6 x 1.32 x 0.83) 2255 x 400 x 250 (88.8 x 15.8 x 9.8) 870-960

806-960 MHz

2


Vertical Pattern

Horizontal Pattern

124

www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasPolarization: Dual 45 Electrical Downtilt: Fixed Horizontal beamwidth: 65 or 90 Broadband

806-960 MHz


ApplicationsThis innovative range of broadband fixed tilt antennas are crosspolarized, available in 65 or 90 degree horizontal beamwidths for use in the following systems: Trunking / SMR (806-824, 851-869MHz) Cellular (824-849, 869-896 MHz) GSM 900 / ETACS (872-915, 917-960MHz) Trunking (896-901, 935-940MHz) These high performance antennas have excellent upper sidelobe suppression, VSWR and front to back ratio. The antennas are available in a variety of gain options varying from 13.2 to 18.2dBi covered by a covered by an UV resistant ASA radome. These antennas have two 7-16 connectors mounted at the bottom and are designed for use with our new APM40 Global Mount system / APM70-3C cluster kit.

2

Performance Optimization TechniquesFighting co-channel interferences is key to improve network performances. Suppressing side lobes reduces creation of co-channel interferences. Where once side lobe suppression was typically in the range of 12 dB, the target is now 18 to 20 dBwith RFS achieving typically better than 20 dB across the entire tilt range with its Optimizer antenna series. The smaller the side lobe compared with the main lobe, the better the antenna will fight co-channel interference, but if its not the first upper side lobe that potentially interferes, it could always be the second so every unwanted signal needs to be as small as possible.Upper side lobe levels range between -13 to -20dB90 120 60

APX86-90* Series90 120 60

30

30

20

10

3

0

-30

-120 -90

-60

Horizontal PatternScattered RF Energy in urban environment

Upper side lobe levels < -22dB90 120 60

Scattered RF Energy in urban environment

Features & Benefits Constant performance across frequency band for all tilt values At least 30 dB isolation between polarizations High gain Stable horizontal and vertical beamwidths Excellent upper sidelobe suppression Very low beam squint over frequency band Effective polarization diversity ensured by high cross polar discrimination Broadband design 125

30

30

30

20

10

3

0

30

20

10

3

0

-30

-30

-120 -90

-60

-120 -90

-60

Standard Performance Antenna

High Performance Antenna

Side lobe levels are suppressed to better than 20dB in high performance antennas as a means of reducing co-channel interference.

www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasAPX86-906513L-CT0Horizontal Beamwidth, deg 65 Gain, dBi 15.0 Electrical Downtilt, deg 0 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 870-960 67 65 16 15 14.4 (12.3) 14.9 (12.8) > 18 all (typically > 20) > 25 < 1.5:1 > 30 500 Dual pol +/-45 > 150 1319 x 312 x 120 (51.8 x 12.2 x 4.7) 200 (125) 0.39 (4.1) 160 (100) 479 (108) 479 (108) Aluminum Brass ASA Plastic Light Grey RAL7035 9.0 (19.8) 1.5 x .37 x .23 (5.2 x 1.2 x 0.7) 1590 x 370 x 225 (62.5 x 14.5 x 8.8)

806-960 MHz

2


Vertical Pattern

Horizontal Pattern

APX86-906513L-CT4Horizontal Beamwidth, deg 65 Gain, dBi 15.0 Electrical Downtilt, deg 4ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 65 16 15 14.1 (12.0) 14.7 (12.6) > 18 all (typically > 20) > 30 < 1.5:1 > 30 500 Dual pol +/-45 > 150 1319 x 312 x 120 (51.8 x 12.2 x 4.7) 200 (125) 0.39 (4.1) 160 (100) 479 (108) 479 (108) Aluminum Brass ASA Plastic Light Grey RAL7035 9.0 (19.8) 9.0 (19.8) 11 (24) 1.5 x .37 x .23 (5.2 x 1.2 x 0.7) 1590 x 370 x 225 (62.5 x 14.5 x 8.8) 870-960

MECHANICAL SPECIFICATIONSDimensions - HxWxD, mm (in) Survival Wind Speed, km/h (mph) Max Wind Loading Area, m (ft) Rated Wind Speed, km/h (mph) Maximum Thrust @ Rated Wind, N (lbf) Front Thrust @ Rated Wind, N (lbf) Reflector Material Radiating Element Material Radome Material Radome Color Weight w/ Mtg Hardware, kg (lb) Weight w/o Mtg Hardware, kg (lb) Shipping Weight, kg (lb) Packing Dimensions - HxWxD, m (ft) Packing Dimensions, HxWxD, mm (in)

Vertical Pattern


www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasAPX86-906513L-CT8Horizontal Beamwidth, deg 65 Gain, dBi 14.8 Electrical Downtilt, deg 8

806-960 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 65 16 15.5 14.1 (12.0) 14.7 (12.6) > 18 all (typically > 20) > 30 < 1.5:1 > 30 500 Dual pol +/-45 > 150 1319 x 312 x 120 (51.8 x 12.2 x 4.7) 200 (125) 0.39 (4.1) 160 (100) 479 (108) 479 (108) Aluminum Brass ASA Plastic Light Grey RAL7035 10.8 (23.8) 9.0 (19.8) 12.8 (28) 1.5 x .37 x .23 (5.2 x 1.2 x 0.7) 1590 x 370 x 225 (62.5 x 14.5 x 8.8) 870-960

2Vertical Pattern


Horizontal Pattern

APX86-906513L-CT12Horizontal Beamwidth, deg 65 Gain, dBi 14.7 Electrical Downtilt, deg 12ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 870-960 67 65 16 15 14.3 (12.2) 14.7 (12.6) > 18 all (typically > 20) > 27 < 1.5:1 > 30 500 Dual pol +/-45 > 150 1319 x 312 x 120 (51.8 x 12.2 x 4.7) 200 (125) 0.39 (4.1) 160 (100) 479 (108) 479 (108) Aluminum Brass ASA Plastic Light Grey RAL7035 10.8 (23.8) 9.0 (19.8) 12.8 (28) 1.5 x .37 x .23 (5.2 x 1.2 x 0.7) 1590 x 370 x 225 (62.5 x 14.5 x 8.8)


Vertical Pattern


www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasAPX86-906515L-CT0Horizontal Beamwidth, deg 65 Gain, dBi 17 Electrical Downtilt, deg 0 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 870-960 67 65 9.6 9 16.5 (14.3) 17.0 (14.8) > 18 all (typically > 20) > 30 < 1.4:1 < 1.3:1 > 30 500 Dual pol +/-45 > 150 2080 x 312 x 120 (81.8 x 12.3 x 5) 200 (125) 0.66 (7.10) 160 (100) 810 (182) 810 (182) Aluminum Brass ASA Plastic Light Grey RAL7035 14 (31.2) 2.4 x .37 x .23 (7.8 x 1.2 x 0.75) 2400 x 370 x 230 (94.5 x 14.5 x 9.0)120

806-960 MHz

90 60

30

30

20

10

3

0

-30

2

-120 -90

-60



30

30

20

10

3

0

-30

-120 -90

-60

Horizontal Pattern

APX86-906515L-CT6Horizontal Beamwidth, deg 65 Gain, dBi 17 Electrical Downtilt, deg 6ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 870-960 67 65 9.6 9 16.5 (14.3) 17.0 (14.8) > 18 all (typically > 20) > 30 < 1.4:1 < 1.3:1 > 30 500 Dual pol +/-45 > 150 2080 x 312 x 120 (81.8 x 12.3 x 5) 200 (125) 0.66 (7.10) 160 (100) 810 (182) 810 (182) Aluminum Brass ASA Plastic Light Grey RAL7035 14 (31.2) 2.4 x .37 x .23 (7.8 x 1.2 x 0.75) 2400 x 370 x 230 (94.5 x 14.5 x 9.0)30 20 10 3 0 90 120 60

30

-30

-120 -90

-60



30

30

20

10

3

0

-30

-120 -90

-60


www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasAPX86-906516L-CT0Horizontal Beamwidth, deg 65 Gain, dBi 18.0 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 67 7.4 17.5 (15.4) > 18 all (typically > 20) > 30 < 1.35:1 > 30 500 Dual pol +/-45 > 150 870-960 65 6.8 18 (15.9)120

806-960 MHz

90 60

30


30

20

10

3

0

-30

-120 -90

-60

2

MECHANICAL SPECIFICATIONSDimensions - HxWxD, mm (in) Survival Wind Speed, km/h (mph) Max Wind Loading Area, m (ft) Rated Wind Speed, km/h (mph) Maximum Thrust @ Rated Wind, N (lbf) Front Thrust @ Rated Wind, N (lbf) Reflector Material Radiating Element Material Radome Material Radome Color Weight w/o Mtg Hardware, kg (lb) Packing Dimensions - HxWxD, m (ft) Packing Dimensions, HxWxD, mm (in) 2600 x 312 x 120 (102.3 x 12.2 x 5) 200 (125) 0.82 (8.82) 160 (100) 1012 (228) 1012 (228) Aluminum Brass ASA Plastic Light Grey RAL7035 17 (37.5) 2.9 x .37 x .23 (9.5 x 1.2 x 0.75) 2900 x 370 x 230 (114 x 14.5 x 9.0)120


30

30

20

10

3

0

-30

-120 -90

-60

Horizontal Pattern

APX86-906516L-CT4Horizontal Beamwidth, deg 65 Gain, dBi 17.8 Electrical Downtilt, deg 4ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 870-960 67 64 7.4 6.8 17.2 (15.0) 17.8 (15.6) > 18 all (typically > 20) > 30 < 1.35:1 30 500 Dual pol +/-45 > 150 2600 x 312 x 120 (102.3 x 12.2 x 5) 200 (125) 0.82 (8.82) 160 (100) 1012 (228) 1012 (228) Aluminum Brass ASA Plastic Light Grey RAL7035 17 (37.5) 2.9 x .37 x .23 (9.5 x 1.2 x 0.75) 2900 x 370 x 230 (114 x 14.5 x 9.0)30 20 10 3 0 90 120 60

30

-30

-120 -90

-60



30

30

20

10

3

0

-30

-120 -90

-60


www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasAPX86-906516L-CT6Horizontal Beamwidth, deg 65 Gain, dBi 17.5 Electrical Downtilt, deg 6 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 870-960 68 65 7.4 6.8 16.8 (14.7) 17.5 (15.4) > 18 all (typically > 20) > 30 < 1.35:1 30 500 Dual pol +/-45 > 150 2600 x 312 x 120 (102.3 x 12.2 x 5) 200 (125) 0.82 (8.82) 160 (100) 1012 (228) 1012 (228) Aluminum Brass ASA Plastic Light Grey RAL7035 17 (37.5) 2.9 x .37 x .23 (9.5 x 1.2 x 0.75) 2900 x 370 x 230 (114 x 14.5 x 9.0)120

806-960 MHz

2

Vertical Pattern


90 60

30

30

20

10

3

0

-30

-120 -90

-60

Horizontal Pattern

APX86-906516L-CT9Horizontal Beamwidth, deg 65 Gain, dBi 17.3 Electrical Downtilt, deg 9ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 68 7.4 16.8 (14.7) > 18 all (typically > 20) > 30 < 1.35:1 > 30 500 Dual pol +/-45 > 150 2600 x 312 x 120 (102.3 x 12.2 x 5) 200 (125) 0.82 (8.82) 160 (100) 1012 (228) 1012 (228) Aluminum Brass ASA Plastic Light Grey RAL7035 17 (37.5) 2.9 x .37 x .23 (9.5 x 1.2 x 0.75) 2900 x 370 x 230 (114 x 14.5 x 9.0)120

870-960 65 6.8 17.3 (15.2)

Vertical Pattern


90 60

30

30

20

10

3

0

-30

-120 -90

-60


www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasAPX869011-CT0Horizontal Beamwidth, deg 90 Gain, dBi 13.7 Electrical Downtilt, deg 0

806-960 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-894 90 15 13.7 (11.6) > 20 < 1.5:1 > 32 (typ.35) 400 Dual pol +/-45 > 150 1320 x 265 x 140 (51.94 x 10.43 x 5.51) 200 (125) 0.35 (3.74) 160 (100) 319 (71) 319 (71) Aluminum Brass UV resistant ASA Light Grey RAL7035 8.6 (18.92) 1.5 x 0.3 x 0.22 (4.95 x 0.99 x 0.75) 1470 x 300 x 220 (57.84 x 11.81 x 8.66)

2Vertical Pattern


Horizontal Pattern

APX909011-CT0Horizontal Beamwidth, deg 90 Gain, dBi 13.5 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 872-960 90 13 13.5 (11.4) > 14 > 20 < 1.5:1@RX > 30 400 Dual pol +/-45 > 150 1320 x 265 x 140 (51.94 x 10.43 x 5.51) 200 (125) 0.35 (3.74) 160 (100) 319 (71) 319 (71) Aluminum Brass UV resistant ASA Light Grey RAL7035 8.6 (18.92) 1.5 x 0.3 x 0.22 (4.95 x 0.99 x 0.75) 1470 x 300 x 220 (57.84 x 11.81 x 8.66) < 1.3:1@TX


Vertical Pattern


www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasAPX86-909014L-CT0Horizontal Beamwidth, deg 88 Gain, dBi 15.5 Electrical Downtilt, deg 0 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 88 9 15.2 (13.1) > 18 > 18 all (typically > 20) > 22 < 1.5:1 > 30 (Typ.35) 500 Dual pol +/-45 > 150 2080 x 265 x 140 (82 x 10.43 x 5.51) 200 (125) 0.55 (5.9) 160 (100) 800 (180) Aluminum Brass UV resistant ASA Light Grey RAL7035 11.0 (24.2) 2.1 x 0.28 x 0.23 (6.93 x 0.92 x 0.76) 2100 x 280 x 230 (82.7 x 11 x 9) > 23 15.5 (13.4) 870-960

806-960 MHz

2

Vertical Pattern

MECHANICAL SPECIFICATIONSDimensions - HxWxD, mm (in) Survival Wind Speed, km/h (mph) Max Wind Loading Area, m (ft) Rated Wind Speed, km/h (mph) Maximum Thrust @ Rated Wind, N (lbf) Reflector Material Radiating Element Material Radome Material Radome Color Weight w/o Mtg Hardware, kg (lb) Packing Dimensions - HxWxD, m (ft) Packing Dimensions, HxWxD, mm (in)

Horizontal Pattern

APX86-909014L-CT4Horizontal Beamwidth, deg 88 Gain, dBi 15.7 Electrical Downtilt, deg 4ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 88 9.5 15.3 (13.2) > 18 > 18 all (typically > 20) > 22 < 1.3:1 > 30 (Typ.35) 500 Dual pol +/-45 > 150 2080 x 265 x 140 (82 x 10.43 x 5.51) 200 (125) 0.55 (5.9) 160 (100) 800 (180) Aluminum Brass UV resistant ASA Light Grey RAL7035 11.0 (24.2) 2.1 x 0.28 x 0.23 (6.93 x 0.92 x 0.76) 2100 x 280 x 230 (82.7 x 11 x 9) > 23 9 15.7 (13.6) 870-960

Vertical Pattern



www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasAPX86-909014L-CT6Horizontal Beamwidth, deg 88 Gain, dBi 15.6 Electrical Downtilt, deg 6

806-960 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 88 9 15.2 (13.1) > 18 > 18 all (typically > 20) > 22 < 1.3:1 > 30 (Typ.35) 500 Dual pol +/-45 > 150 2080 x 265 x 140 (82 x 10.43 x 5.51) 200 (125) 0.55 (5.9) 160 (100) 800 (180) Aluminum Brass UV resistant ASA Light Grey RAL7035 11.0 (24.2) 2.1 x 0.28 x 0.23 (6.93 x 0.92 x 0.76) 2100 x 280 x 230 (82.7 x 11 x 9) > 23 15.6 (13.5) 870-960

2Vertical Pattern


Horizontal Pattern

APX86-909015-CT0Horizontal Beamwidth, deg 90 Gain, dBi 16.8 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 87 7.5 16.3 (14.2) > 18 (typically > 20) > 18 all (typically > 20) > 25 < 1.35:1 > 30 500 Dual pol +/-45 > 150 2600 x 312 x 120 (102.3 x 12.2 x 5) 200 (125) 0.82 (8.82) 160 (100) 1012 (228) 1012 (228) Aluminum Brass ASA Plastic Light Grey RAL7035 19.0 (41.8) 2.9 x .37 x .23 (9.5 x 1.2 x 0.75) 2900 x 370 x 230 (114 x 14.5 x 9.0) < 1.4:1-120 -90 -60 90 120 60

30

870-960 85 7 16.8 (14.7)

30

20

10

3

0

-30

Vertical Pattern90 120 60


30

30

20

10

3

0

-30

-120 -90

-60


www.rfsworld.com

APX86-90* Series Broadband Fixed Tilt AntennasAPX86-909015-CT4Horizontal Beamwidth, deg 90 Gain, dBi 16.7 Electrical Downtilt, deg 4 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 87 7.5 16.3 (14.2) > 18 (typically > 20) > 18 all (typically > 20) > 25 < 1.35:1 > 30 500 Dual pol +/-45 > 150 2600 x 312 x 120 (102.3 x 12.2 x 5) 200 (125) 0.82 (8.82) 160 (100) 1012 (228) 1012 (228) Aluminum Brass ASA Plastic Light Grey RAL7035 19.0 (41.8) 2.9 x .37 x .23 (9.5 x 1.2 x 0.75) 2900 x 370 x 230 (114 x 14.5 x 9.0) < 1.4:1-120 120

806-960 MHz

90 60

30

870-960 85 7 16.7 (14.6)

30

20

10

3

0

-30

2

-60 -90



30

30

20

10

3

0

-30

-120 -90

-60

Horizontal Pattern

APX86-909015-CT6Horizontal Beamwidth, deg 85 Gain, dBi 16.5 Electrical Downtilt, deg 6ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-870 87 7.5 16 (13.9) > 17 > 17 > 25 < 1.35:1 > 30 500 Dual pol +/-45 > 150120

870-960 85 7 16.5 (14.4)

Vertical Pattern

90 60

MECHANICAL SPECIFICATIONSDimensions - HxWxD, mm (in) Survival Wind Speed, km/h (mph) Max Wind Loading Area, m (ft) Rated Wind Speed, km/h (mph) Maximum Thrust @ Rated Wind, N (lbf) Front Thrust @ Rated Wind, N (lbf) Reflector Material Radiating Element Material Radome Material Radome Color Weight w/o Mtg Hardware, kg (lb) Packing Dimensions - HxWxD, m (ft) Packing Dimensions, HxWxD, mm (in) 2600 x 312 x 120 (102.3 x 12.2 x 5) 200 (125) 0.82 (8.82) 160 (100) 1012 (228) 1012 (228) Aluminum Brass ASA Plastic Light Grey RAL7035 19.0 (41.8) 2.9 x .37 x .23 (9.5 x 1.2 x 0.75) 2900 x 370 x 230 (114 x 14.5 x 9.0)

30

30

20

10

3

0

-30

-120 -90

-60


www.rfsworld.com

AP86*& AP90* Series CELlite Fixed Tilt AntennasPolarization: Vertical Electrical Downtilt: Fixed Horizontal beamwidth: 65 or 90

806-960 MHz

ApplicationsThis well-known range of fixed tilt antennas are vertically polarized for space diversity with an option of 65 or 90 degree horizontal beamwidths for use in the following systems: Trunking / SMR (806-824, 851-869MHz) Cellular (824-849, 869-894MHz) GSM900 / ETACS (872-915, 917-960MHz) Due to its monolithic mechanical design these highly reliable antennas are IM3 free with extremely stable ageing. CELlite antennas are available in a variety of gain options varying from 14.5 to 17.5 dBi with mechanical downtilt mount option. These antennas are covered by a UV resistant ASA radome and have one 7-16 connectors mounted at the back. They are all designed for use with our new APM40 Global Mount system / APM70-3C cluster kit. AP909016-T0 Series


2

Features & Benefits High gain Stable horizontal and vertical beamwidths Optimized null fill Good Front-to-Back ratio Fast horizontal pattern roll-off Efficient co-site interference reduction Broadband bandwidth allowing installation on all cellular standards (AP90 Series) Very low visual impact Low wind load

Typical Patterns

Vertical Pattern

Horizontal Pattern135

www.rfsworld.com

AP86* & AP90* Series CELlite Fixed Tilt AntennasAP866513-CT0Horizontal Beamwidth, deg 65 Gain, dBi 14.5 Electrical Downtilt, deg 0 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-894 65 18 14.5 (12.4) > 30 (Typ.35) < 1.5:1 1000 Vertical > 150 987 x 265 x 130 (38.84 x 10.43 x 5.12) 200 (125) 0.26 (2.8) 160 (100) 170 (38) 170 (38) Aluminum Aluminum UV Resistant ASA Light Grey RAL7035 5.5 (12.1) 1.1 x 0.3 x 0.2 (3.6 x 0.99 x 0.73) 1120 x 300 x 220 (44.07 x 11.81 x 8.66)

806-960 MHz

2


Vertical Pattern

Horizontal Pattern

AP866516-CT0Horizontal Beamwidth, deg 65 Gain, dBi 17 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-894 65 9 17 (14.9) > 30 (Typ.35) < 1.5:1 1000 Vertical > 150 1977 x 265 x 130 (77.79 x 10.43 x 5.12) 200 (125) 0.52 (5.61) 160 (100) 555 (125) 555 (125) Aluminum Aluminum UV Resistant ASA Light Grey RAL7035 10.9 (23.98) 2.1 x 0.3 x 0.2 (6.9 x 0.99 x 0.73) 2115 x 300 x 220 (83.23 x 11.81 x 8.66)


Vertical Pattern


www.rfsworld.com

AP86* & AP90* Series CELlite Fixed Tilt AntennasAP869011-CT0Horizontal Beamwidth, deg 90 Gain, dBi 13.3 Electrical Downtilt, deg 0

806-960 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-894 90 17.5 13.3 (11.2) > 25 < 1.5:1 1000 Vertical > 150 987 x 265 x 130 (38.84 x 10.43 x 5.12) 200 (125) 0.26 (2.8) 160 (100) 170 (38) 170 (38) Aluminum Aluminum UV Resistant ASA Light Grey RAL7035 5 (11) 1.1 x 0.3 x 0.2 (3.6 x 0.99 x 0.73) 1120 x 300 x 220 (44.07 x 11.81 x 8.66)

2Vertical Pattern


Horizontal Pattern

AP869014-CT0Horizontal Beamwidth, deg 90 Gain, dBi 15.3 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 806-894 90 9 15.3 (13.2) > 25 < 1.5:1 1000 Vertical > 150 1977 x 265 x 130 (77.79 x 10.43 x 5.12) 200 (125) 0.52 (5.61) 160 (100) 555 (125) 555 (125) Aluminum Aluminum UV Resistant ASA Light Grey RAL7035 10.9 (23.98) 2.1 x 0.3 x 0.2 (6.9 x 0.99 x 0.73) 2115 x 300 x 220 (83.23 x 11.81 x 8.66)


Vertical Pattern


www.rfsworld.com

AP86* & AP90* Series CELlite Fixed Tilt AntennasAP906513-CT0Horizontal Beamwidth, deg 65 Gain, dBi 15.5 Electrical Downtilt, deg 0 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 824-894 65 17 14.5 (12.4) > 30 (Typ.35) < 1.5:1 1000 Vertical > 150 987 x 265 x 130 (38.84 x 10.43 x 5.12) 200 (125) 0.26 (2.8) 160 (100) 170 (38) 170 (38) Aluminum Aluminum UV Resistant ASA Light Grey RAL7035 5.5 (12.1) 1.1 x 0.3 x 0.2 (3.6 x 0.99 x 0.73) 1120 x 300 x 220 (44.07 x 11.81 x 8.66) < 1.3:1 15.5 (13.4) 872-960

806-960 MHz

2


Vertical Pattern

Horizontal Pattern

AP906516-CT0Horizontal Beamwidth, deg 65 Gain, dBi 17.5 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 824-894 65 8.5 17 (14.9) > 30 (Typ.35) < 1.5:1 1000 Vertical > 150 1977 x 265 x 130 (77.79 x 10.43 x 5.12) 200 (125) 0.52 (5.61) 160 (100) 555 (125) 555 (125) Aluminum Aluminum UV Resistant ASA Light Grey RAL7035 10.9 (23.98) 2.1 x 0.3 x 0.2 (6.9 x 0.99 x 0.73) 2115 x 300 x 220 (83.23 x 11.81 x 8.26) < 1.3:1 17.5 (15.4) 872-960


Vertical Pattern


www.rfsworld.com

AP86* & AP90* Series CELlite Fixed Tilt AntennasAP909011-CT0Horizontal Beamwidth, deg 90 Gain, dBi 13.5 Electrical Downtilt, deg 0

806-960 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 824-894 90 17.5 13.3 (11.2) > 25 < 1.5:1 1000 Vertical > 150 987 x 265 x 130 (38.84 x 10.43 x 5.12) 200 (125) 0.26 (2.8) 160 (100) 170 (38) 170 (38) Aluminum Aluminum UV Resistant ASA Light Grey RAL7035 5 (11) 1.1 x 0.3 x 0.2 (3.6 x 0.99 x 0.73) 1120 x 300 x 220 (44.07 x 11.81 x 8.66) < 1.3:1 13.5 (11.4) 872-960

2Vertical Pattern


Horizontal Pattern

AP909014-CT0Horizontal Beamwidth, deg 90 Gain, dBi 16 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 824-894 90 8.5 15.5 (13.4) > 25 < 1.5:1 1000 Vertical > 150 1977 x 265 x 130 (77.79 x 10.43 x 5.12) 200 (125) 0.52 (5.61) 160 (100) 555 (125) 555 (125) Aluminum Aluminum UV Resistant ASA Light Grey RAL7035 10.9 (23.98) 2.1 x 0.3 x 0.2 (6.9 x 0.99 x 0.73) 2115 x 300 x 220 (83.23 x 11.81 x 8.66) < 1.3:1 16 (13.9) 872-960


Vertical Pattern


www.rfsworld.com

AP86* & AP90* Series CELlite Fixed Tilt AntennasAP909016-CT0Horizontal Beamwidth, deg 90 Gain, dBi 17.3 Electrical Downtilt, deg 0 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 824-894 90 5.5 17.3 (15.2) > 25 < 1.5:1 1000 Vertical > 150 2940 x 265 x 130 (115.7 x 10.43 x 5.12) 200 (125) 0.78 (8.34) 160 (100) 850 (191) 850 (191) Aluminum Aluminum UV Resistant ASA Light Grey RAL7035 15 (33) 2.9 x 0.3 x 0.23 (9.6 x 0.99 x 0.76) 2975 x 300 x 250 (117.1 x 11.81 x 9.84) < 1.3:1 872-960

806-960 MHz

2


Vertical Pattern

Horizontal Pattern

140

www.rfsworld.com

APL* & ALE* Series Maximizer & Optimizer Fixed Tilt AntennasPolarization: Vertical Electrical Downtilt: Fixed or Variable Horizontal beamwidth: 65, 80 or 90

806-941 MHz

ApplicationsThis well-known ranges of fixed or variable tilt antennas are vertically polarized for space diversity with an option of 65, 80 or 90 degree horizontal beamwidths for use in the following systems: Cellular (824-849, 869-894MHz) Trunking / SMR (806-824, 851-869MHz) Trunking (896-901, 935-940MHz) Due to its monolithic mechanical design these highly reliable antennas are IM3 free with extremely stable ageing. Maximizer or Optimizer antennas are available in a variety of gain options varying from 11.1 to 18.1 dBi with with fixed or variable electrical tilt options. These antennas are covered by a UV stabilized high impact ABS radome and have one 7-16 connectors mounted at the back. They are all designed for use with either our APM18/19 fixed mount or our APM20/21 downtilt mount.


2

APL866516 Series

Features & Benefits High gain Stable horizontal and vertical beamwidths Optimized null fill 45 dB Front-to-Back ratio Fast horizontal pattern roll-off Efficient co-channel interference reduction High reliability no solder joints270

VERTICAL PATTERN APL866516 Series 0

-30 -20 -10

90

Performance Optimization TechniquesThe RFS Maximizer log periodic dipole array boasts the highest front-to-back ever achieved: 45dB. The Maximizer's upper lobe suppression reduces co-channel interference in TDMA systems and its heavy null fill delivers exceptional close-in coverage. For CDMA systems the Maximizer helps to maximize capacity by minimizing the soft hand-off zone as well a pilot pollution. The RFS Optimizer allows a carrier to optimize system performance without service interruption, protecting the revenue stream. The continuous adjustable electrical down tilt feature and high front to back ratio reduces co-channel interference. The Optimizer offers the easiest and most cost effective solution to increase wireless capacity.

180

HORIZONTAL PATTERN APL866516 Series 0

270

-30 -20 -10

90

180

141

www.rfsworld.com

APL* & ALE* Series 806-941 MHz Maximizer & Optimizer Fixed Tilt AntennasAPL866513-42T0Horizontal Beamwidth, deg 65 Gain, dBi 15.1 Electrical Downtilt, deg 0 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 65 15 15.1 (13) > 20 > 20 45 < 1.35:1 500 Vertical < -100 1219 x 234 x 203 (48 x 9.2 x 8) 200 (125) 0.376 (4.05) 180 (112) 903 (203) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 7 (15.7) 1594 x 343 x 349 (62.75 x 13.5 x 13.75)270 -30 -20 -10 90 0

2

180

MECHANICAL SPECIFICATIONSDimensions - HxWxD, mm (in) Survival Wind Speed, km/h (mph) Max Wind Loading Area, m (ft) Rated Wind Speed, km/h (mph) Maximum Thrust @ Rated Wind, N (lbf) Reflector Material Radiating Element Material Radome Material Weight w/o Mtg Hardware, kg (lb) Packing Dimensions, HxWxD, mm (in)

Vertical Pattern0

270

-30 -20 -10

90

180

Horizontal Pattern

APL866513-42T6Horizontal Beamwidth, deg 65 Gain, dBi 15.1 Electrical Downtilt, deg 6ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 65 15 15.1 (13) > 20 > 20 45 < 1.35:1 500 Vertical < -100 1219 x 234 x 203 (48 x 9.2 x 8) 200 (125) 0.376 (4.05) 180 (112) 903 (203) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 7 (15.7) 1594 x 343 x 349 (62.75 x 13.5 x 13.75)270 -30 -20 -10 90 0

180


Vertical Pattern0

270

-30 -20 -10

90

180


www.rfsworld.com

APL* & ALE* Series 806-941 MHz Maximizer & Optimizer Fixed Tilt AntennasAPL866516-42T0Horizontal Beamwidth, deg 65 Gain, dBi 18.1 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 65 8 18.1 (16) > 20 > 20 45 < 1.5:1 500 Vertical < -100 2362 x 234 x 203 (93 x 9.2 x 8) 200 (125) 0.734 (7.9) 180 (112) 1761 (396) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 14 (31.4) 2629 x 356 x 349 (103.5 x 14 x 13.75)270 -30 -20 -10 90 0


180

2


Vertical Pattern0

270

-30 -20 -10

90

180

Horizontal Pattern

APL866516-42T4Horizontal Beamwidth, deg 65 Gain, dBi 18.1 Electrical Downtilt, deg 4ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 65 8 18.1 (16) > 20 > 20 45 < 1.5:1 500 Vertical < -100 2362 x 234 x 203 (93 x 9.2 x 8) 200 (125) 0.734 (7.9) 180 (112) 1761 (396) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 14 (31.4) 2629 x 356 x 349 (103.5 x 14 x 13.75)270 -30 -20 -10 90 0

180


Vertical Pattern0

270

-30 -20 -10

90

180


www.rfsworld.com

APL* & ALE* Series 806-941 MHz Maximizer & Optimizer Fixed Tilt AntennasAPL868010-42T0Horizontal Beamwidth, deg 80 Gain, dBi 12.1 Electrical Downtilt, deg 0 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 80 30 12.1 (10) 45 < 1.5:1 500 Vertical < -100 610 x 152 x 203 (24 x 6 x 8) 200 (125) 0.093 (1) 200 (125) 280 (63) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 1.4 (3.27) 813 x 330 x 254 (32 x 13 x 10)270 -30 -20 -10 90 0

2


180

Vertical Pattern0

270

-30

-20

-10

90

180

Horizontal Pattern

APL868013-42T0Horizontal Beamwidth, deg 80 Gain, dBi 14.1 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 80 15 14.1 (12) 45 < 1.5:1 500 Vertical < -100 1219 x 152 x 203 (48 x 6 x 8) 200 (125) 0.307 (3.3) 200 (125) 916 (206) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 2.8 (6.32) 1270 x 305 x 203 (50 x 12 x 8)270 -30 -20 -10 90 0


180

Vertical Pattern0

270

-30

-20

-10

90

180


www.rfsworld.com

APL* & ALE* Series 806-941 MHz Maximizer & Optimizer Fixed Tilt AntennasAPL868013-42T4Horizontal Beamwidth, deg 80 Gain, dBi 14.1 Electrical Downtilt, deg 4ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 80 15 14.1 (12) 45 < 1.5:1 500 Vertical < -100 1219 x 152 x 203 (48 x 6 x 8) 200 (125) 0.307 (3.3) 200 (125) 916 (206) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 2.8 (6.32) 1270 x 305 x 203 (50 x 12 x 8)270 -30 -20 -10 90 0



180

2

Vertical Pattern0

270

-30

-20

-10

90

180

Horizontal Pattern

APL869009-42T0Horizontal Beamwidth, deg 90 Gain, dBi 11.1 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 90 30 11.1 (9) 45 < 1.5:1 500 Vertical < -100 610 x 152 x 203 (24 x 6 x 8) 200 (125) 0.093 (1) 200 (125) 280 (63) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 1.4 (3.27) 660 x 305 x 203 (26 x 12 x 8)270 -30 -20 -10 90 0


180

Vertical Pattern0

270

-30

-20

-10

90

180


www.rfsworld.com

APL* & ALE* Series 806-941 MHz Maximizer & Optimizer Fixed Tilt AntennasAPL869012-42T0Horizontal Beamwidth, deg 90 Gain, dBi 14.1 Electrical Downtilt, deg 0 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 90 15 14.1 (12) 45 < 1.5:1 500 Vertical < -100 1219 x 152 x 203 (48 x 6 x 8) 200 (125) 0.307 (3.3) 200 (125) 916 (206) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 3 (6.75) 1270 x 305 x 203 (50 x 12 x 8)270 -30 -20 -10 90 0

2


180

Vertical Pattern0

270

-30

-20

-10

90

180

Horizontal Pattern

APL869012-42T3Horizontal Beamwidth, deg 90 Gain, dBi 14.1 Electrical Downtilt, deg 3ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 90 15 14.1 (12) 45 < 1.5:1 500 Vertical < -100 1219 x 152 x 203 (48 x 6 x 8) 200 (125) 0.307 (3.3) 200 (125) 916 (206) 5052-H32 Aluminum Aluminum Alloy UV Stabilized High Impact ABS 3 (6.75) 1270 x 305 x 203 (50 x 12 x 8)270 -30 -20 -10 90 0


180

Vertical Pattern0

270

-30

-20

-10

90

180


www.rfsworld.com

APL* & ALE* Series 806-941 MHz Maximizer & Optimizer Fixed Tilt AntennasAPL869014-42T0Horizontal Beamwidth, deg 90 Gain, dBi 16.1 Electrical Downtilt, deg 0ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 90 7.8 16.1 (14) 45 < 1.5:1 500 Vertical < -100 2337 x 152 x 203 (92 x 6 x 8) 200 (125) 0.587 (6.32) 180 (112) 1409 (317) Aluminum Alloy Aluminum Alloy Weather-Resistant Plastic 5.4 (12.11) 2438 x 305 x 203 (96 x 12 x 8)270 -30 -20 -10 90 0


180

2


Vertical Pattern0

270

-30 -20 -10

90

180

Horizontal Pattern

APL869014-42T6Horizontal Beamwidth, deg 90 Gain, dBi 16.1 Electrical Downtilt, deg 6ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 90 7.8 16.1 (14) 45 < 1.5:1 500 Vertical < -100 2337 x 152 x 203 (92 x 6 x 8) 200 (125) 0.587 (6.32) 180 (112) 1409 (317) Aluminum Alloy Aluminum Alloy Weather-Resistant Plastic 5.4 (12.11) 2438 x 305 x 203 (96 x 12 x 8)270 -30 -20 -10 90 0

180


Vertical Pattern0

270

-30 -20 -10

90

180


www.rfsworld.com

APL* & ALE* Series 806-941 MHz Maximizer & Optimizer Fixed Tilt AntennasALE866513-42T0Horizontal Beamwidth, deg 65 Gain, dBi 15.1 Electrical Downtilt, deg 0-14 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-894 65 17 15.1 (13) 40 < 1.5:1 500 Vertical < -100 1219 x 254 x 234 (48 x 10 x 9.2) 200 (125) 0.418 (4.5) 160 (100) 800 (180) Aluminum Alloy Aluminum Alloy UV Resistant ABS 10 (21) 1372 x 508 x 381 (54 x 20 x 15)270 -30 -20 -10 90 0

2

180


Vertical Pattern0

270

-30 -20 -10

90

180

Horizontal Pattern

ALE859012-42T0Horizontal Beamwidth, deg 90 Gain, dBi 13.6 Electrical Downtilt, deg 0-14ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Maximum Power Input, W Polarization 3rd Order IMP @ 16 x 41 dBm, dBm 806-941 90 16 13.6 (11.5) 40 < 1.5:1 500 Vertical < -100 1227 x 257 x 197 (48.3 x 10.1 x 7.75) 200 (125) 0.39 (4.2) 200 (125) 1169 (263) Aluminum Alloy Aluminum Alloy UV Resistant ABS 8 (18) 1448 x 406 x 305 (57 x 16 x 12)270 -30 -20 -10 90 0


180

Vertical Pattern0

270

-30

-20

-10

90

180


www.rfsworld.com

APXV18-20* Series Optimizer Broadband AntennasPolarization: Dual 45 Electrical Downtilt: Adjustable Horizontal beamwidth: 65 or 90 Broadband Tilt range: 10

1710-2170 MHz

ApplicationsThis innovative range of broadband variable tilt antennas are crosspolarized, available in 65 or 90 degree horizontal beamwidths for use in the following systems: DCS1800 (1710-1785, 1805-1880MHz) PCS (1850-1910, 1930-1990MHz) UMTS (1920-1980, 2110-2170MHz) These high performance antennas have excellent upper sidelobe suppression, VSWR and front to back ratio. The antennas are available in a variety of gain options varying from 14.7 to 19.2dBi covered by a UV resistant fiberglass radome. Having continuously adjustable electrical downtilt over the range of 10. These antennas have two 7-16 connectors mounted at the bottom and are designed for use with our new APM40 Global Mount system / APM70-3C cluster kit. As with all our variable tilt antenna range they can be upgraded using our OPTIMIZER RT system for remote tilt control APXV18-20* Series


2

90 120 60

Features & Benefits30

Constant performance across frequency band for all tilt values High gain High suppression of all upper sidelobes (typically 18 (typically > 20) >18 all (Typically >20) > 28 < 1.5:1 > 30 300 Dual pol +/-45 > 160 > 170 700 x 175 x 80 (27.5 x 6.8 x 3.15) 200 (125) 0.14 (1.47) 160 (100) 180 (40.45) 180 (40.45) Aluminum Brass Fiberglass Light Grey RAL7035 6 (13.2) 0.86 x .26 x .20 (2.81 x 0.85 x 0.65) 860 x 260 x 200 (33.8 x 10.2 x 7.8) 1900-2170 63 13.6 15.1 (13.0)

1710-2170 MHz

2

Vertical Pattern


Horizontal Pattern

APXV18-206513T-CHorizontal Beamwidth, deg 65 Gain, dBi 15.4 Electrical Downtilt, deg 0-10ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 38 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 68 15.3 14.9 (12.8) > 18 > 18 > 28 < 1.5:1 > 30 300 Dual pol +/-45 > 160 > 170 700 x 175 x 80 (27.5 x 6.8 x 3.15) 200 (125) 0.14 (1.47) 160 (100) 180 (40.45) 180 (40.45) Aluminum Brass Fiberglass Light Grey RAL7035 6 (13.2) 0.86 x .26 x .20 (2.81 x 0.85 x 0.65) 860 x 260 x 200 (33.8 x 10.2 x 7.8) 1900-2170 63 13.6 15.4 (13.3)

Vertical Pattern



www.rfsworld.com

APXV18-20* Series Optimizer Broadband AntennasAPXV18-206516L-CHorizontal Beamwidth, deg 65 Gain, dBi 18 Electrical Downtilt, deg 0-10

1710-2170 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 38 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 68 7 17.6 (15.5) >17 >28 1900-2170 63 6.4 18.0 (16.0) >18 all (Typically >20) >30 < 1.5:1 > 30 300 Dual pol +/-45 > 160 > 170 1349 x 175 x 80 (53.0 x 6.8 x 3.15) 200 (125) 0.31 (3.3) 160 (100) 380 (185) 380 (185) Aluminum Brass Fiberglass Light Grey RAL7035 8.5 (18.7) 1.5 x .26 x .20 (4.9 x 0.85 x 0.65) 1520 x 260 x 200 (59.8 x 10.2 x 7.8)

2Vertical Pattern


Horizontal Pattern

APXV18-206516T: Tilt range 4-14 upon request APXV18-206517-CHorizontal Beamwidth, deg 65 Gain, dBi 19 Electrical Downtilt, deg 0-10ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 38 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 67 5.0 18.8 (16.7) >17 1900-2170 63 4.6 19.0 (16.9) >18 all (Typically >20) > 30 < 1.5:1 > 30 300 Dual pol +/-45 > 160 > 170 1850 x 175 x 80 (72.0 x 6.8 x 3.15) 200 (125) 0.45 (4.7) 160 (100) 558 (125) 558 (125) Aluminum Brass Fiberglass Light Grey RAL7035 12 (26.4) 2.0 x 0.26 x 0.2 (6.6 x 0.85 x 0.65) 2021 x 260 x 200 (79.5 x 10.2 x 7.8)

Vertical Pattern


Horizontal Pattern

151

www.rfsworld.com

APXV18-20* Series Optimizer Broadband AntennasAPXV18-209014-CHorizontal Beamwidth, deg 90 Gain, dBi 16.5 Electrical Downtilt, deg 0-10 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 38 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 88 7.0 6.4 16.5 (14.4) 16.5 (14.4) > 19 first (typically > 22) > 17 all other (typically > 20) > 26 < 1.5:1 > 30 300 Dual pol +/-45 > 160 > 170 1349 x 175 x 80 (53.0 x 6.8 x 3.15) 200 (125) 0.29 (3.0) 160 (100) 380 (85) 380 (85) Aluminum Brass Fiberglass Light Grey RAL7035 8.5 (18.7) 1.5 x .26 x .20 (4.9 x 0.85 x 0.65) 1520 x 260 x 200 (59.8 x 10.2 x 7.8) 1900-2170

1710-2170 MHz

90 120 60

30

30

20

10

3

0

-30

2

-120 -90

-60



30

30

20

10

3

0

-30

-120 -90

-60

Horizontal Pattern

APXV18-209015-CHorizontal Beamwidth, deg 90 Gain, dBi 17.7 Electrical Downtilt, deg 0-10ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 38 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 88 5.1 4.5 17.9 (15.8) 17.7 (15.7) >18 first (typically >22) >18 all (Typically >20) > 28 < 1.5:1 > 30 300 Dual pol +/-45 > 160 > 170120

1900-2170


MECHANICAL SPECIFICATIONSDimensions - HxWxD, mm (in) Survival Wind Speed, km/h (mph) Max Wind Loading Area, m (ft) Rated Wind Speed, km/h (mph) Maximum Thrust @ Rated Wind, N (lbf) Front Thrust @ Rated Wind, N (lbf) Reflector Material Radiating Element Material Radome Material Radome Color Weight w/o Mtg Hardware, kg (lb) Packing Dimensions - HxWxD, m (ft) Packing Dimensions, HxWxD, mm (in) 1850 x 175 x 80 (72.0 x 6.8 x 3.15) 200 (125) 0.45 (4.7) 160 (100) 558 (125) 558 (125) Aluminum Brass Fiberglass Light Grey RAL7035 11.5 (25.3) 2.0 x 0.26 x 0.2 (6.6 x 0.85 x 0.65) 2021 x 260 x 200 (79.5 x 10.2 x 7.8)

30

30

20

10

3

0

-30

-120 -90

-60


www.rfsworld.com

APX18-20* Series Broadband Fixed Tilt AntennasPolarization: Dual 45 Electrical Downtilt: Fixed Horizontal beamwidth: 65 or 90 Broadband Tilt range: 2, 5 & 6

1710-2170 MHz

ApplicationsThis innovative range of broadband variable tilt antennas are crosspolarized, available in 65 or 90 degree horizontal beamwidths for use in the following systems: DCS1800 (1710-1785, 1805-1880MHz) PCS (1850-1910, 1930-1990MHz) UMTS (1920-1980, 2110-2170MHz) These high performance antennas have excellent upper sidelobe suppression, VSWR and front to back ratio. The antennas are available in a variety of gain options varying from 14.7 to 19.2 dBi with electrical downtilt option of 0, 2, 5 and 6. These antennas are covered by a UV resistant fiberglass radome. These antennas have two 7-16 connectors mounted at the bottom and are designed for use with our new APM40 Global Mount system/APM70-3C cluster kit.


2

Performance Optimization TechniquesThe need for improved control of RF energy has led to ongoing developments in antenna technology aimed at reducing spurious emissions and providing tighter control of the antenna footprint. The impact of interference in GSM networks is generally measured as the ratio of carrier signal (C) to co-channel interference level (I)-or the C/I ratio-where minimum C/I values for acceptable voice quality are 9 to 10 decibels. It follows that reducing interference will improve C/I, and in turn yield improvements in audio quality and network capacity. Where once side lobe suppression was typically in the range of 12 dB, the target is now 18 to 20 dBwith RFS achieving typically better than 20 dB across the entire tilt range with its Optimizer antenna series.

APX18-20* Series

90 120 60 120

90 60

30

30

30

20

10

3

0

30

20

10

3

0

-30

-30

-120 -90

-60

-120 -90

-60

Horizontal Pattern

Vertical Pattern

Features & Benefits10

High gain For every dB of improved Upper sidelobe suppression there is a dB of C/I improvement. High suppression of all upper sidelobes (typically 28 < 1.5:1 > 30 300 Dual pol +/-45 > 150 > 170 668 x 198 x 50 (26.29 x 7.79 x 1.97) 200 (125) 0.13 (1.42) 160 (100) 210 (47) 210 (47) Aluminum Brass Fiberglass Light Grey RAL7035 3.4 (7.5) 0.77 x 0.3 x 0.17 (2.54 x 099 x 0.56) 770 x 300 x 170 (30.3 x 11.81 x 6.69) 1900-2170 63 12.5 14.9 (12.8)

1710-2170 MHz

2


Vertical Pattern

Horizontal Pattern

APX18-206513-CT6Horizontal Beamwidth, deg 65 Gain, dBi 13.8 Electrical Downtilt, deg 6ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 65 13.5 13.8 (11.7) > 28 < 1.5:1 > 30 300 Dual pol +/-45 > 150 > 170 668 x 198 x 50 (26.29 x 7.79 x 1.97) 200 (125) 0.13 (1.42) 160 (100) 210 (47) 210 (47) Aluminum Brass Fiberglass Light Grey RAL7035 3.4 (7.5) 0.77 x 0.3 x 0.17 (2.54 x 099 x 0.56) 770 x 300 x 170 (30.3 x 11.81 x 6.69) 1900-2170 63 12.5


Low Band Vertical Pattern


www.rfsworld.com

APX18-20* Series Broadband Fixed Tilt AntennasAPX18-206516L-CT0Horizontal Beamwidth, deg 65 Gain, dBi 18 Electrical Downtilt, deg 0

1710-2170 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 65 7 17.5 (15.4) > 20 > 27 < 1.4:1 > 30 (typ 35) 300 Dual pol +/-45 > 150 > 170 1350 x 175 x 80 (53.15 x 6.8 x 3.15) 200 (125) 0.24 (2.58) 160 (100) 349 (113) 349 (113) Aluminum Brass Fiberglass Light Grey RAL7035 7.5 (16.55) 1.5 x 0.3 x 0.2 (4.95 x 0.99 x 0.66) 1465 x 275 x 160 (57.68 x 10.83 x 6.3) 1900-2170 63 6 18 (15.9)

2


Low Band Horizontal Pattern

APX18-206516L-CT2Horizontal Beamwidth, deg 65 Gain, dBi 18 Electrical Downtilt, deg 2ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 65 7 17.5 (15.4) > 20 > 27 < 1.4:1 > 30 (typ 35) 300 Dual pol +/-45 > 150 > 170 1350 x 175 x 80 (53.15 x 6.8 x 3.15) 200 (125) 0.24 (2.58) 160 (100) 349 (113) 349 (113) Aluminum Brass Fiberglass Light Grey RAL7035 7.5 (16.55) 1.5 x 0.3 x 0.2 (4.95 x 0.99 x 0.66) 1465 x 275 x 160 (57.68 x 10.83 x 6.3) 1900-2170 63 6 18 (15.9)



Low Band Horizontal Pattern 155

www.rfsworld.com

APX18-20* Series Broadband Fixed Tilt AntennasAPX18-206516L-CT6Horizontal Beamwidth, deg 65 Gain, dBi 18 Electrical Downtilt, deg 6 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 65 7 17.5 (15.4) > 22 > 27 < 1.4:1 > 30 (typ 35) 300 Dual pol +/-45 > 150 > 170 1350 x 175 x 80 (53.15 x 6.8 x 3.15) 200 (125) 0.24 (2.58) 160 (100) 349 (113) 349 (113) Aluminum Brass Fiberglass Light Grey RAL7035 7.5 (16.55) 1.5 x 0.3 x 0.2 (4.95 x 0.99 x 0.66) 1465 x 275 x 160 (57.68 x 10.83 x 6.3) 1900-2170 63 6 18 (15.9) > 18 (typ 20)

1710-2170 MHz

2




APX18-206517-CT2Horizontal Beamwidth, deg 65 Gain, dBi 19 Electrical Downtilt, deg 2ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 65 5 18.5 (16.4) > 20 > 30 < 1.4:1 > 30 (typ 35) 300 Dual pol +/-45 > 150 > 170 1840 x 175 x 80 (72.44 x 6.8 x 3.15) 200 (125) 0.32 (3.44) 160 (100) 473 (106) 473 (106) Aluminum Brass Fiberglass Light Grey RAL7035 9.5 (20.95) 1.9 x 0.3 x 0.2 (6.27 x 0.99 x 0.66) 1965 x 275 x 160 (77.36 x 10.83 x 6.3) 1900-2170 63 4.5 19 (16.9) > 18 (typ 20) > 25




www.rfsworld.com

APX18-20* Series Broadband Fixed Tilt AntennasAPX18-206517-CT5Horizontal Beamwidth, deg 65 Gain, dBi 19 Electrical Downtilt, deg 5

1710-2170 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 65 5 18.5 (16.4) > 20 > 30 < 1.4:1 > 30 (typ 35) 300 Dual pol +/-45 > 150 > 170 1840 x 175 x 80 (72.44 x 6.8 x 3.15) 200 (125) 0.32 (3.44) 160 (100) 473 (106) 473 (106) Aluminum Brass Fiberglass Light Grey RAL7035 9.5 (20.95) 1.9 x 0.3 x 0.2 (6.27 x 0.99 x 0.66) 1965 x 275 x 160 (77.36 x 10.83 x 6.3) 1900-2170 63 4.5 19 (16.9) > 18 (typ 20) > 25

2Low Band Vertical Pattern



APX18-209014-CT2Horizontal Beamwidth, deg 90 Gain, dBi 15.9 Electrical Downtilt, deg 2ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 90 8 15.4 (13.3) > 20 > 28 < 1.4:1 > 30 300 Dual pol +/-45 > 150 > 170 1220 x 175 x 80 (48.03 x 6.8 x 3.15) 200 (125) 0.21 (2.26) 160 (100) 316 (71) 316 (71) Aluminum Brass Fiberglass Light Grey RAL7035 6.5 (14.33) 1.5 x 0.3 x 0.2 (4.95 x 0.99 x 0.66) 1450 x 250 x 145 (57.09 x 9.84 x 5.71) 1900-2170 7.5 15.9 (13.8)




www.rfsworld.com

APX18-20* Series Broadband Fixed Tilt AntennasAPX18-209014-CT5Horizontal Beamwidth, deg 90 Gain, dBi 15.8 Electrical Downtilt, deg 5 BASE STATION ANTENNASELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 90 8 15.4 (13.3) > 20 (typ 23) > 28 < 1.4:1 > 35 300 Dual pol +/-45 > 150 > 170 1220 x 175 x 80 (48.03 x 6.8 x 3.15) 200 (125) 0.21 (2.26) 160 (100) 316 (71) 316 (71) Aluminum Brass Fiberglass Light Grey RAL7035 6.5 (14.33) 1.5 x 0.3 x 0.2 (4.95 x 0.99 x 0.66) 1450 x 250 x 145 (57.09 x 9.84 x 5.71) 7.5 15.8 (13.7) > 18 (typ 22) 1900-2170

1710-2170 MHz

2




APX18-209015-CT2Horizontal Beamwidth, deg 90 Gain, dBi 17.7 Electrical Downtilt, deg 2ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 90 5 17.5 (15.4) > 18 (typ 20) > 30 < 1.4:1 > 30 (typ 35) 300 Dual pol +/-45 > 150 > 170 1845 x 175 x 80 (72.64 x 6.8 x 3.15) 200 (125) 0.32 (3.44) 160 (100) 473 (106) 473 (106) Aluminum Brass Fiberglass Light Grey RAL7035 9.2 (20.28) 1.9 x 0.3 x 0.2 (6.27 x 0.99 x 0.66) 1965 x 275 x 160 (77.36 x 10.83 x 6.3) 4.5 17.7 (15.6) 1900-2170




www.rfsworld.com

APX18-20* Series Broadband Fixed Tilt AntennasAPX18-209015-CT5Horizontal Beamwidth, deg 90 Gain, dBi 17.5 Electrical Downtilt, deg 5

1710-2170 MHz


ELECTRICAL SPECIFICATIONSFrequency Range, MHz Horizontal Beamwidth, deg Vertical Beamwidth, deg Gain, dBi (dBd) 1st Upper Sidelobe Suppression, dB Front-To-Back Ratio, dB VSWR Isolation between Ports, dB Maximum Power Input, W Polarization 3rd Order IMP @ 2 x 43 dBm, dBc 7th Order IMP @ 2x46 dBm, dBc 1710-1900 90 5 17.4 (15.3) > 18 (typ 20) > 30 < 1.4:1 > 30 (typ 35) 300 Dual pol +/-45 > 150 > 170 1845 x 175 x 80 (72.64 x 6.8 x 3.15) 200 (125) 0.32 (3.44) 160 (100) 473 (106) 473 (106) Aluminum Brass Fiberglass Light Grey RAL7035 9.2 (20.28) 1.9 x 0.3 x 0.2 (6.27 x 0.99 x 0.66) 1965 x 275 x 160 (77.36 x 10.83 x 6.3) 4.5 17.5 (15.4) 1900-2170

2Low Band Vertical Pattern



159

www.rfsworld.com

160


2

www.rfsworld.com

AP18* & AP19* Series CELlite Fixed Tilt AntennasPolarization: Vertical Electrical Downtilt: Fixed Horizontal beamwidth: 65 or 90

1710-1990 MHz

ApplicationsThis well-known range of fixed tilt antennas are vertically polarized for space diversity with an option of 65 or 90 degree horizontal beamwidths for use in the following cellular standards: GSM1800 (1710-1785, 1805-1880MHz) PCS1900 (1850-1910, 1930-1990MHz) Due to its monolithic mechanical design these highly reliable antennas are IM3 free with extremely stable ageing. CELlite antennas are available in a variety of gain options varying from 16.0 to 17.5 dBi with electrical tilt and mechanical downtilt mount options. These antennas are covered by a UV resistant fiberglass radome and have one 7-16 connectors mounted at the bottom They are all designed for use with our new APM40 Global Mount system / APM70-3C cluster kit. AP18 & AP19 Series


2

Features & Benefits High gain Stable horizontal and vertical beamwidths Optimized null fill Good Front-to-Back ratio Fast horizontal pattern ro

RFS APX Antenna

Documents

Transcript of RFS APX Antenna