RESULTS Training

Woodlot Reporting to RESULTS

Online Data Entry

March 2013

Mei-Ching Tsoi

mtsoi@shaw.ca

Modules

1. Legislative Context and Business Documentation

2. Online Data Entry

3. Online Data Entry Demo

4. ESF Submission

5. RESULTS Canned Reports

http://www.for.gov.bc.ca/his/results/business.htm

SubmissionType

Mandatory Approximate Timing SpatialData Required

Details

OpeningDefinition

Yes At Harvest Completion*

Following Amendments

Annual Report Deadline

Yes Includes site plan, tenure.Must be provided to create Opening for all other reporting.

Disturbance Yes Upon Harvest Completion or Annually

Optional Forest Cover update is required with disturbance activity reporting

Silv Activity Yes Upon Activity Completion or Annually

Optional

Forest Cover Yes At Harvest Completion

Free Growing Declaration

Regeneration Declaration (when required or volunteered)

Yes Identifies inventory and silviculture labels as well as damage agents.

Supports milestone declaration.

ReportingLifecycle

* Post Harvest Forest Cover should not have NSR and reflect planting stocking, if possible. Otherwise, opening will have NSR until Free Growing

Must have a bceid account and authorized to submit to RESULTS

RESULTS Accesshttp://www.for.gov.bc.ca/his/results/

RESULTS Pre-Conditions

• Cutblock must be status of “HB” or “LC”

Use of Exhibit ‘A’ Online Spatial Function• FTA CP application with spatial by cutblock submitted

• Only one standard unit and one Forest Cover polygon created for the opening

All of the above conditions must be met to use RESULTS online entry.

If require more than one Standard Unit or more than one Forest Cover,

then must use submit via ESF.

RESULTS Online Entry

Exhibit ‘A’ Check Box to be used for WL with FTA CP Spatial by Block available for:

• Opening Creation

• Standard Unit Creation (only one SU)

• Amendments

• Forest Cover (only for one forest cover polygon)

Go to Opening Tab

Add new Opening

Enter minimum data for new opening:• District• Opening Category• Licence/CP/Cutblock• Opening Gross Area• Approval Date (if Site Plan

requiring approval or use current date)

• Previous Stand Label• Include Exhibit ‘A’ Spatial Box.

New Opening ID system’s assigned to opening created.

Opening ID or tenure informatin may be used for subsequent ESF submissions.

S305-Multi-Tenure enables adding extra tenures, if applicable.

Note that one tenure must be set to Prime (Yes) while all others are non-prime (No).

Designated Prime Licence (Yes) will be displayed in the Opening Header.

New Openings contains no SUs.

Must create new SU.Amendment will be used to create SUs but will require approval.

Use Rationale with text: “This is not an amendment” to inform district that this procedure is to create a SU for the new opening.

Amendment will be only option to provide SS ID (approved stocking standard).

Must accept confirmation to proceed.

Keep adding for each section and save.

Only one Standard Unit can be created. Add New SU. Then:

Add mandatory data required for first section:

• SU • Net Area to be Reforested• SS ID (if applicable)• BEC• Milestone offsets

Save this first.

Add any subsequent section and save each section if requiring individual stocking standard components.

Include Exhibit A will allow attachment of FTA CP Cutblock Spatial.

Use Rationale any required context

Then select Back to S310 Stocking Standard Screen.

Amendment Proposed allows changes to draft amendmentuntil ready to submit.

Once Submit Amendment and Accept will send amendment to Ministry for approval.

Confirmation required to submit.

Status: AMD once an amendment has been initiated

Submitted Amendment changes Status from “AMD” to “SUB”

Opening’s amendment goes to District Inbox for approval.

Amendment Approval will changed Status from “SUB” to “APP” and enables to Standards Unit to appear in S310 Stocking Standard with SP Map.

If Not Approved, then Status will revert back from “SUB” to “AMD” for next action; can modify and re-submit or delete amendment and start over.

Disturbance Reporting must be provided prior to Forest Cover submission.

ESF both Disturbance and Forest Cover may be submitted under the same submission.

Provide any silviculture activities

Planting requires added species, trees planted and lot information.

Forest Cover can be added Online but can only have one Forest Cover Polygon for the opening.

Disturbance Reporting must be entered before “New Forest Cover” option will appear.

1st step – Enter Forest Cover Polygon (without Exhibit ‘A’ spatial).

Polygon must contain all mandatory specified in the RISS-WL

This example polygon has NSR status and does not require Layer and Species. If IMM status, then layer and species must be provided.

Save – to ensure all attribute requirements have been met.

2nd step – once Forest Cover is saved, then Check off Include Exhibit ‘A’ Spatial box and Save again. This second step associates Exhibit ‘A’ spatial to the forest cover polygon.

Completed Forest Cover will be shown in S320-Forest Cover Summary Screen with reference to Forest Cover Map

Add any new forest cover polygon updates as required (ie. free growing)

Example of IMM polygon

All Forest Cover submissions are tracked via Forest Cover History

Land Status summarizes forest cover submission by date and by stocking status/type.

Milestone Declarations may be completed online or by ESF.

Submission Date is date is auto-filled with current date of entry or ESF submission.

Use Comments to provide RPF No. for declaration and any special notes pertaining declaration if important.

Standards ID usage is based on Woodlot Licence Plan orMinistry Defaults

Note that Woodlot Defaults can be searched using % which is a wildcard.

Need to review standard as many does not include EFG and have LFG value while WLPPR is default of 20.

Standards ID usage is based on Woodlot Licence Plan orMinistry Defaults

HFP – Provincial DefaultWith Default Standards Indicator “Yes”

Opening Creation at Harvest Completion1. Opening creation

2. Standards Unit (Site Plan content)

3. Disturbance Reporting

4. Forest Cover update reflecting post-harvest stand condition

Silviculture Activity (annually)Completed Silviculture Reporting

Planting report include lot and species information

RESULTS has planning feature that may be useful

At Achieved Regeneration (optional, subject to WLP)

1. Forest Cover update reflecting achieved regeneration

2. Regeneration Milestone

At Free Growing Completion

3. Forest Cover update reflecting free growing conditions

4. Free Growing Milestone

RESULTS provides ability to supply SU Modification actions online and via ESF.

Site Plan (no SS ID) Amendment Requires Approval

FPCBC (WLFMR) Site Plan (no SS ID)

Approval Required

No Approval Required

No Approval Required

Opening Status

“APP” – active opening, nothing pending“AMD” – active opening, draft amendment“SUB” – active opening, submitted amendment for approval requires District Inbox action

Note that pre-RESULTS, any SU Modification was paper-based, therefore changes not tracked on the system and must refer to opening files.

SU Modifications

FRPA (WLPPR) Site Plan (SS ID)

http://www.for.gov.bc.ca/his/results/webhelp/index.htm

RESULTS – Technical Documentationhttp://www.for.gov.bc.ca/his/results/techDocs.htm

Provides processing rules, dependencies, optionality, context of what information and where it is located in RESULTS – clues to which tables to look for.

Online & ESF Submission Requirements – need to refer to both

RESULTS – Training Recordings & documentation http://www.for.gov.bc.ca/his/results/training/index.htm

Refer to Training website for powerpoints, documentation, recordings or any upcoming training opportunities.

More themes exists than what is shown on this slide.

References on RESULTS Website

Business Documentation

http://www.for.gov.bc.ca/his/results/business.htm

Business/Spatial Views http://www.for.gov.bc.ca/his/results/spatialviews.htm

Technical DocumentationApplication and ESF

http://www.for.gov.bc.ca/his/results/techDocs.htm

Training Resources http://www.for.gov.bc.ca/his/results/training/index.htm

RESULTS – Application Support http://www.for.gov.bc.ca/his/results/support.htm