Respirator Fit Testing and Training
-
Upload
yuli-carpenter -
Category
Documents
-
view
38 -
download
3
description
Transcript of Respirator Fit Testing and Training
1
Respirator Fit Testing and
Training
2
Definitions
High efficiency particulate air (HEPA) filter
Immediately dangerous to life of health (IDLH)
Negative pressure respirator
Oxygen deficient atmosphere
Positive pressure respirator
Powered air-purifying respirator
Self-contained breathing apparatus (SCBA)
Supplied-air respirator (SAR)
3
General Information
Why respirator is necessary
How improper fit, use, or maintenance can effect the purpose of the respirator
4
Filter differences» Organic Chemical Filters» Dust Filters» Dust Masks
USE THE RIGHT FILTER!
General Information
5
Limitations and Capabilities
Oxygen level in atmosphere must be between 19.5% and 21%
Will only work with corresponding filters or cartridges
Can protect you from hazardous levels of materials
If worn properly and in the right atmosphere, respirators can save your life
6
Inspection, Donning, Doffing, Use, and Checking Seals
Always inspect respirator before donning
Check integrity of seals and cartridges before putting on respirator
7
Maintenance and Storage
Cleaning and disinfecting Storage Inspection
8
Medical Signs and Symptoms
The following are signs or symptoms that may prevent the use of a respirator:» Seizures» Claustrophobia» Asthma» Emphysema» Pneumonia
» Collapsed Lung» Lung Cancer» Broken Ribs» Chest
Injuries/Surgeries» Any other lung
problems» Heart or Circulation
problems» Anxiety
9
Scenarios
A worker is exposed to 50 parts per million (ppm) of Benzene. Benzene has a Permissible Exposure Level (PEL) of 10 ppm. The worker wants to use a half-mask, air-purifying organic vapor cartridge respirator.
10 (Protection factor for half-mask respirator)
X 10 (PEL of 10 parts per million for Benzene)
= 100 (Max. permissible safe concentration for this situation)
10
A worker will be exposed to 600 micrograms per cubic meter of lead during a paint removal operation. Lead dust has a PEL of 50 micro grams per cubic meter.
The worker wants to use a disposable, air-purifying, high efficiency particulate air (HEPA) respirator.
5 (Protection factor for a disposable mask)
X 50 (PEL of 50 micrograms/cubic meter for lead)
= 250 (Max. permissible safe concentration for this situation)
Scenarios
11
Any Questions?