Model 8038

Quantitative Respirator Fit Tester

TSI PortaCount Pro+ 8038 The PortaCount Pro+ Respirator Fit Tester can fit test SCBAs, respirators, N95, P1 and P2 respirators

OSHA, CSA, HSE and ANSI Compliant for all tight-fitting respirators, including series 95, 99, 100, FFP1, FFP2 and FFP3 filtering facepiece respirators

Built-in N95 Companion™ technology

Measures fit factors greater than 10,000

Switch between N95 and N99 mode of operation in seconds

Automates fit testing with FitPro+ Fit Test Software

Standalone operation - no external computer required

Use with external computer to generate reports and print fit test cards

Product details

No other respirator fit tester can quantitatively fit test all types of respirators-gas masks, SCBAs, respirators, even N95, P1 and P2 disposable respirators. The PortaCount Pro+ Respirator Fit Tester 8038 eliminates the guesswork associated with tedious and error-prone qualitative fit test methods. If the mask requires fit testing, count on the PortaCount Pro+ Fit Tester to provide the fastest, easiest and best HSE (UK) and OSHA (US)-compliant fit test method.

Applications

Quantitative respirator fit testing (QNFT)

Disposable filtering-facepiece fit testing for Series 100/99/95/P1/P2/P3/ HEPA masks

Half-mask fit testing

Full-face fit testing

Gas mask fit testing

PAPR fit testing

SCBA fit testing

Fit Test Adapters

TSI Model 8025 Fit Test Adapters provide an easy, practical alternative to the probed method of quantitative respirator fit testing. These fit test adapters enable individuals to be quantitatively fit tested in their own respirators. The test adapters yield the same results as fit tests using the conventional probed respirator technique. The adapters offer you the advantage of being able to test the integrity of the individual’s assigned respirator while also verifying donning competence and face piece sizing. Hygienic concerns associated with using a shared test respirator are reduced because the individual uses his/her assigned respirator. Because the fit test adapter components that are exposed to exhaled air are disposable, there is no need to sanitize between fit tests.

FitPro+ Software

FitPro+ Fit Test Software makes fit testing simple and fool proof. Included with every PortaCount Pro and PortaCount Pro+ Respirator Fit Tester, the program automatically leads you through the fit test protocol step by step, you can’t make a mistake. Your fit test results are stored in a database for easy report generation, retrieval and regulatory compliance.

Specifications Fit Factor Range 1 to greater than 10,000, 1-200 for P1 and P2 Typical Fit Factor Accuracy ±10% of reading Fit Factor Measurement Direct measurement of fit factor (Cout/Cin)** Dimensions (HWD) 6.75 in. x 8.5 in. x 9.5 in. (17 cm x 22 cm x 24 cm) Weight Unit Only 3 kg With Standard Accessories and Case 8 kg

Power Autosensing 100 to 250 VAC, 50 to 60 Hz Flow Rate Sample 350 cm3/min Total 1000 cm3/min (nominal) Temperature Range Operation 32 to 100°F (0 to 38°C) Storage -40 to 122°F (-40 to 50°C) Alcohol Hours Per Charge 6 hours at 70°F (21°C) Alcohol Type 99.5%+ reagent grade isopropyl Carrying Case Dimensions (HWD) 9 in. x 13.7 in. x 19.5 in/23 cm x 34.8 cm x 49.5 cm Pass/Fail Setting User-selectable: 0 to 10,000 Factory Recalibration Interval One year

Included Items PortaCount Pro+

AC adapter with universal plug set

8026 Particle Generator

Alcohol cartridge and fill capsule

Storage cap

Two zero check filters

Model 8016 alcohol supplies

3/16 and 1/4 inch hose adapters

Two spare alcohol wicks

100 sampling probes, probe insertional

Neck strap

Carrying case

FitPro+ Fit Test Software CD

Flash memory drive (1GB)

USB cable

Operation & service manual

Two-year warranty

Optional Accessories Mask Sampling Adapters for select

respirator models

Mask leakage is measured simultaneously while test subject moves and breathes.

Model 8038 PortaCount Pro+ Respirator Fit Tester is patented under U.S. Patent No. 6,125,845.

PortaCount, TSI, and the TSI logo are registered trademarks, and FitPro+ is a trademark of TSI Incorporated.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

PC Requirements Windows® 7 (32 and 64 bit),

Windows 8 (32 and 64 bit),or Windows 10 (32 and 64 bit) operating system

Microsoft.Net version 4 (installation software will install Microsoft.Net if necessary

An internet connection is required to install Microsoft.Net

1 GHz process

1280 x 800 screen resolution monitor

500 MB free space on hard drive

1 free USB port

CD-ROM reader or internet connection (to install the software)

Neem contact op met ons verkoopteam!

Alexander van Leijenhorst Manager Safety avanleijenhorst@procaresafety.nl M. 06-538 409 35

Onze missie ProCare streeft ernaar om duurzame en innovatieve oplossingen te leveren aan bedrijven en organisaties in de zorg en de sport.

ProCare Safety, onderdeel van ProCare BV, wil haar bijdrage leveren door duurzame en innovatie oplossingen te leveren aan bedrijven en industriële organisaties. We hopen hiermee te bereiken dat een ieder kan werken in een veilige omgeving.

Onze visie Wij willen dat in 2025 iedere arbeidshygiënist of veiligheidskundige op de markt werkzaam is met de best mogelijk professionele

meetapparatuur gebruikt zodat hij/zij een veilig werkklimaat kan realiseren . Onze missie en visie resulteren in onderstaande kernwaarden- en eigenschappen

Onze kernwaarden We vinden het belangrijk dat onze klanten tevreden zijn

We streven naar een zo gezond mogelijk leven en vinden bewegen maar ook veiligheid zeer belangrijk We bouwen graag langdurige relaties op met vertrouwen als basis

We zijn allemaal gekwalificeerd en gespecialiseerd binnen ons eigen vakgebied en plezier hebben in ons werk is belangrijk

Onze kerneigenschappen. ProCare Safety is: behulpzaam & meedenken

innovatief & creatief ambitieus & competitief authentiek & deskundig

open & duidelijk

Onze kernwaarden en eigenschappen worden samengevat in de tagline die we al sinds de start van ons bedrijf in 2002 voeren:

We take intensive Care!

Merijn Visser Intern Accountmanager mvisser@procaresafety.nl T. 050-207 21 72