Remote Management, Telemetry and Systems … i2M is a robust IoT gateway with cellular...

1

© Adportas 2017, all rights reserved - v.1.0.1 modification date 04/12/2017

1. Description.

Adportas i2M is a robust IoT gateway with cellular communications capabilities (UMTS/HSPA+/EDGE/GPRS/GSM) developed for the interconnection of systems and machinery to the internet, remote management, and general automation and telemetry.

This complex integrated 3G communications system has been completely programmed, electronically designed and assembled by the Adportas software and hardware departments.

Adportas i2M captures information from any given device (electric meters, refrigerators, trucks, nodes, etc.) or wireless equipment within a network (Zigbee, 6LowPan, Mesh) and sends it as a data package to a soliciting server or recipient over a cellular network.

2. The power of end-to-end solutions.

This product provides unlimited possibilities for all kinds of automation and telemetry applications (electric, automotive, control of entries, temperature, vending, etc.).

Due to its strong R&D team and vast software designing experience, Adportas is able to provide robust end-to-end solutions of the highest technological level.

2.1 APPLICATION EXAMPLE Nº1 - VENDING.

Various parameters for each refrigerator are being monitored by Adportas i2M, from door opening control (via two relays within the device) to inner temperature sensing (over serial port). Adportas i2M then sends all the collected data over a 3G network to the applications server, where the user can manage it through a web interface.

Remote Management, Telemetry and Systems Interconnection Gateway

Light Status Door Status Motor Status Tº Status

Server

Cellular network

Data

Vending management Backend

(Developed by Adportas)

Mesh network

Refrigerators

2


2.2 APPLICATION EXAMPLE Nº2 - FLEET CONTROL.

Trucks equipped with Adportas i2M gain 3G connectivity and GPS allocation, enabling the supervision of routes and transit times, plus increasing fleet security in case of any unforeseen circumstances such as accidents, etc. Connected to the on-board computer via serial port, Adportas i2M can gather data regarding engine performance, oil levels, rotation and mileage, and become a valuable prevention tool for every truck within a fleet.

2.3 APPLICATION EXAMPLE Nº3 - SMART PUBLIC LIGHTING.

Adportas i2M connects each luminary to the administrative backend via a 3G signal over a wireless network (Zigbee, 6LowPan, Mesh), enabling remote maintenance, turning on and off, dimming, failure notification and GPS allocation, among other options.

Server

Cellular network

Cellular network

Data

Data

Truck managementBackend


i2Light Server Backend


Mesh network

Truck

GPS

Collect performance data

3. Adportas i2M Pro-1: Main functionalities.

3.1 3G communications bridge between its LAN and USB serial ports (RS 232 and RS 485) connecting these to specific software.

3.2 Enables interaction with its GPIO ports and its two relays over http.

3


4. Hardware.

System description:

• SoC: Dual-core CPU at 500 MHz and 32-bit.• RAM: 1 GB, LPDDR POP memory(2 channel, 32 bits @ 800 MT/sec).• Flash storage: 4 Gb eMMC (v4.51 specification).

Physical features:

• Housing: black/plate anodized aluminum • Weight: 490 grs.• Product dimensions:

4.1. Specifications.

Standard supply voltage:12V/1A.

Reverse polarity protection.

Operating system: Ubilinux (Adportas System)

TX power:Medium current:240 mA @ +12 VDC;Instant peak current:800 mA @ +12 VDC.

Standby current:Medium current: <150mA @ +12 VDC

Humidity operating range: <60% relative humidity

Temperature operating range: -25°C a 60°C // Battery charges only between 10°C and 45°C to comply with JEITA specifications for Lithium-Ion or Lithium Polymer batteries.

153,26 mm

44,5 mm 87,2 mm

4


4.2 Main features.

4.2.1 3G/LTE (cellular parameters)

Cellular: • UMTS/HSPA+/EDGE/GPRS/GSM. • Standards and frequency bands: • Dual-Band UMTS/HSPA+ 850/1900 MHz. • Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz.

Specifications for data transfer: • HSPA+ Max. 14.4 Mbps (DL), Max. 5.76 Mbps (UL). • WCDMA Max. 384 Kbps (DL), Max. 384 Kbps (UL). • EDGE Class: Max. 236.8 Kbps (DL), Max. 236.8 Kbps (UL). • GPRS Max. 85.6 Kbps (DL), Max. 85.6 Kbps (UL).

CertificationsModem SIM5360A:• FCC• ROHS• REACH

4.2.2 GPS

Specifications:• CELL assistant Location• A-GPS: MS-Based, MS-Assisted• Stand-alone GPS• QUALCOMM XTRA GPS mode• GLonass

4.2.3 WIFI Parameters

Type:• Dual-band 2.4 GHz and 5 GHz IEEE• 802.11 a/b/g/n• Single-stream IEEE 802.11n• Supports standard SDIO v2.0 and gSPI (48MHz) host interface

Security: WPA and WPA2

Mode: AP and Client

5


4.3 Parts and specifications.

RS485 SERIAL PORTBytesize: 7,8 bit.

Stopbits: 1, 2-bit.Parity: No parity, odd parity, even parity,

SPACE and MARK parity.Baudrate: 110bps ~ 115200bps.

Connector (3,81mm): 3 pins header; A, B,COM.

CUSTOM DIGITAL I/O (X6)Voltage: Logic 0–5 VDC.

Maximum current: 35 mA.Custom I/O by Adportas Software.

Connector (3,81mm): 8 pins header,16-26 AWG.

RELAY (X2)Working voltage: 250 V AC/30 V DC.

Maximum current: 3 A.Maximum Power: 750 VA (AC) / 90 W (DC).Connector (3,81mm): Header (16-26 AWG)

3 pins; Common, NO, NC.

SIM X2 CARD SLOT

USB 1.1 (x1)Full Speed HUB.200mA x Port.

ANTENNA INTERFACEStandard SMA female 50 ohm interface;optional 3M/5M/10M/15M antennaextension cable, to meet specific customer needs.

STATUS LEDSPWR (status)3G/LTE (signal power)WIFI (signal power)

LAN (ETHERNET PORT)1xLAN (Four 10/100 Base-T Ethernet ports),Ethernet IEEE 802-3, 802-2;built-in 1.5KV galvanic protection.

RS232 SERIAL PORTByte size: 7,8 bit.Stop bits: 1, 2-bit.Parity: No parity, odd parity, even parity,SPACE and MARK parity.Baudrate: 110bps ~ 115200bps.Connector (3,81mm): 3 pins header; TX, RX,GND.

OPEN COLLECTOR (X4)Emitter to common Ground.Maximum current: 220mA.Maximum switching voltage: 50VDC.Connector (3,81mm): 8 pins header,16-26AWG.

Interface Type

Peripheral Type

6


5. Administrative Interface.

Due to its powerful backend for the control and management of applications, the Adportas i2M IoT gateway provides all necessary remote management capabilities for the supervision of required parameters via its ports of communications (serial port, LAN, USB) and interactions with its GPIO ports and the two relays over 3G cellular network.

General screen mode: displays system status, WIFI IP, 3G connection, ethernet connection, digital ports status, relays, GPS data, phase status, etc.

RS 232 view: Connection over RS 232 port configuration (baudrate, parity, data size, etc.).

7


RS 485 view: Connection over RS 485 port configuration.

Interfaces testing view:

3G view: Configuration of 3G connection.

8


E-mail configuration view: Configuration of e-mail account for the reception of system alerts.

Digital I/O view: Configuration of digital ports, phases and turning alerts on/off.

WIFI view: Configuration of WIFI connection, Client/AP (Access Point) mode selection.

9


LAN view: Configuration of ethernet connection.

Relay view: Relays switching.

6. Adportas i2M Smart Power Supply Unit (SPSU).

The Adportas i2M SPSU (Smart Power Supply Unit), as its name implies, is an intelligent switch mode power supply with phase sensor.It supplies power by transforming Alternate Current (AC) from the electric network into Direct Current (DC) with a three phase 90 - 265 VAC supply voltage, 0 to 5 VDC logic levels, and works with any of the three electric phases due to its phase sensor that detects the correct functioning of these phases, receiving and delivering the necessary information if any of these fail (eventually solving the issue before a total failure of the electric circuits).

Example of use:

From the administrative website of the Adportas i2M IoT gateway it is possible to detect eventual failures and obtain parameters that will identify possible malfunctions in any of these three phases.

Phase 1

Phase 2

Phase 3

Web portalRS 232RS 485

LANPhase statuses: 3

Energy: 2

10


6.1 SPSU specifications.

6.2 SPSU features.

Housing: black anodized aluminumDimensions: 64,20 x 38,14 x 104 mmWeight: 250 gr

• Supply voltage:90 - 265 VAC mono-phase/three-phase.

• Maximum power output: 12 W

• Overvoltage protection: 285 VAC

• Overcurrent protection: 3.85 A.

• Overvoltage protection output: 15 VDC

• Humidity operating range: <60% relative humidity

• Temperature operating range: -25°C a 60°C

7. Accessories.

· GPS Antenna · WIFI Antenna · 3G/LTE Antenna

Carmen Fariña #6669,7640557 Vitacura, Santiago, Chile.

Phone: (+562) 2413 45 00Fax: (+56 2) 2413 45 01www.adportas.com

Description Symbol

VIN VAC

Hz

W

W

V

%

kV

ªC

A

VDC

mV

A

fLINE

- -

- -

-

-

-

-

-

-

-

-

POUT 25 ° C

1.2 / 50 μs overvoltage, IEC 1000-4-5

Encapsulated seal

-

-

-

-

-

-

-

-

3.15

12

50/60

-

-

-

-

-

VOUT

VRIPPLE

IOUT

POUT

VOV

η

-

-

-

Min.

85 265

64

13

0.05

100

1

12

18

-

-

-

50

47

11

15

75

1

Max. Unit Commentary Type

Input

Voltage

Frequency

Output

Output voltage

Ripple Voltage output

Output current

Total power output

Output overvoltage

Efficiency

Complete load

Surge

Thermal performance

Protections

Input fuse

Unloaded power input

Power Output 12V-1A

Power Input90-250 VAC.50/60 HZ.

Single-phase / three-phase

Digital outputPhase sensor- Phase 1- Phase 2- Phase 3Logic levels from 0 to 5 VDC

Remote Management, Telemetry and Systems … i2M is a robust IoT gateway with cellular...

Documents

Transcript of Remote Management, Telemetry and Systems … i2M is a robust IoT gateway with cellular...