Reference

download Reference

of 12

Transcript of Reference

  • 5/22/2018 Reference

    1/12

    1. Ted Knowlton, Reddy Karri S. B., Smith J. S., "Hydrodynamic Scale-Up of Circulating Fluidized Beds", NewHorizons in Fluidization Engineering- Conference proceedings, Engineering Conferences International, (2007).

    2. David Escudero Guevara, "Bed height and material density effects on fluidized bed hydrodynamics", GraduateTheses and Dissertations, Iowa State University, (2010).

    3. Bashiri, Hamed, Mostoufi, Navid, "Effect of Bed Diameter on the Hydrodynamics of Gas-Solid FluidizedBeds", Iran. Journal of Chemical Engineering, 29, (2010), 27-37.

    4. Binod Sreenivasan, Vijay R. Raghavan, "Hydrodynamics of a swirling fluidised bed", Chemical Engineeringand Processing, 41, (2002), 99106.

    5. Natarajan Deepa Priya, Kaliannan Saravanan, Subbaiyan Manoj Pradeep and Nallusamy Subramnaian, "Studieson Hydrodynamics of Food Grains in a Circulating Fluidized Bed", International Journal of Advancements in

    Research & Technology, 2, (2013), 73-77.

    6. Fariborz Taghipour, Naoko Ellis, Clayton Wong, "Experimental and computational study of gassolid fluidizedbed hydrodynamics", Chemical Engineering Science, 60, (2005), 68576867.

    7. Arun S. Mujumdar, "Handbook of Industrial Drying" (2006).8. Hatamipour.M.S, Mowla.D Shrinkage of carrots during drying in an inert medium fluidized bed, Journal of

    Food Engineering 55 (2002) 247252.

    9. Prakash S., Jha S.K., Datta N., Performance evaluation of blanched carrots dried by three different dryersJournal of Food Engineering, 62, (2004), 305313.

    10. Ireneusz Biaobrzewski, Magdalena Zielinska, Arun S. Mujumdar, Marek Markowski, Heat and mass transferduring drying of a bed of shrinking particlesSimulation for carrot cubes dried in a spout-fluidized-bed drier,

    International Journal of Heat and Mass Transfer, 51, (2008), 47044716.

    11. Berruti F.M., Klaas M., Briens C., Berruti F., Model for convective drying of carrots for pyrolysis , Journal ofFood Engineering, 92, (2009), 196201.

    12. Orhan Aydn, Ahmet Kaya, Cevdet Demirtas, Experimental and theoretical analysis of drying carrots ,Desalination, 237, (2009), 285295.

    13. Abbasi Souraki B., Andres A., Mowla D., Mathematical modeling of microwave -assisted inert mediumfluidized bed drying of cylindrical carrot samples, Chemical Engineering and Processing, 48, (2009), 296305.

  • 5/22/2018 Reference

    2/12

    14. Mortaza Aghbashlo, Tayyeb Nazghelichi, Mohammad Hossein Kianmehr, Thermodynamic analysis offluidized bed drying of carrot cubes, Energy, 35, (2010), 4679-4684.

    15. Marek Markowski, Magdalena Zielinska, Air drying characteristics and moisture diffusivity of carrots,Chemical Engineering and Processing, 49, (2010), 212218.

    16. V. Bubnovich, A. Reyes, E. Quijada, A. Mahn Numerical simulation of lyophilization of carrot slices atatmospheric pressure in a fluidized bed, Journal of Food Engineering, 109, (2012) 659667.

    17. Temple S. J., Van Boxtel A. J. B., Modeling of Fluidized -bed Drying of Black Tea, Journal of AgriculturalEngineering Research, 74, (1999), 203-212.

    18. Temple S.J., Van Boxtel A.J.B., Van Straten G., Control of fluid bed tea dryers: controller performanc e undervarying operating conditions Computers and Electronics in Agriculture, 29, (2000), 217231.

    19. Temple S. J., Van Boxtel A. J. B. A Comparison of Dryer Types used for Tea Drying Journal of AgriculturalEngineering Research, 77, (2000), 401-407.

    20. Temple S. J., Tambala S. T., Van Boxtel A. J. B., Monitoring and control of fluid -bed drying of tea, ControlEngineering Practice, 8, (2000), 165-173.

    21. Pancharya P.C.,Popovic D.,Sharma A.L., Thin-layer modeling of black tea drying process, Journal of FoodEngineering, 52, (2002), 349357.

    22. Goswami T. K.,GhodakeH. M.,ChakravertyA., Mathematical Modeling of Withering Characteristics ofTea Leaves, Drying Technology, 24, (2006), 159-164.

    23. Goswami T. K.,GhodakeH. M.,ChakravertyA., Moisture sorption isotherms, heat of sorption andvaporization of withered leaves, black and green tea, Journal of Food Engineering, 78, (2007), 827835.

    24. Lili Liu, Xu Duan, Guangyue Ren, Research on Quality Preservation Drying Technology of Salvia LeavesGreen Tea, Proceedings of the 2013 International Conference on Advanced Mechatronic Systems, Luoyang,

    China, (2013), 25-27.

    25. Umut Yucel, Hami Alpas, Alev Bayindirli, Evaluation of high pressure pretreatment for enhancing the dryingrates of carrot, apple, and green bean, Journal of Food Engineering, 98, (2010), 266272.

    26. Katharina Schossler, Henry Jager, Dietrich Knorr, Effect of continuous and intermittent ultrasound on dryingtime and effective diffusivity during convective drying of apple and red bell pepper Journal of Food

    Engineering, 108, (2012), 103110.

    http://www.sciencedirect.com/science/article/pii/S0260877401001261http://www.sciencedirect.com/science/article/pii/S0260877401001261http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Goswami%2C+T+K)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Ghodake%2C+H+M)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Ghodake%2C+H+M)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Chakraverty%2C+A)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Chakraverty%2C+A)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Goswami%2C+T+K)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Ghodake%2C+H+M)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Ghodake%2C+H+M)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Chakraverty%2C+A)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Chakraverty%2C+A)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Chakraverty%2C+A)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Ghodake%2C+H+M)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Goswami%2C+T+K)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Chakraverty%2C+A)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Ghodake%2C+H+M)http://www.tandfonline.com/action/doSearch?action=runSearch&type=advanced&searchType=journal&result=true&prevSearch=%2Bauthorsfield%3A(Goswami%2C+T+K)http://www.sciencedirect.com/science/article/pii/S0260877401001261http://www.sciencedirect.com/science/article/pii/S0260877401001261
  • 5/22/2018 Reference

    3/12

    27. Emam-Djomeh Z., Askari G.R., Mousavi S.M., Heat and mass transfer in apple cubes in a microwave-assistedfluidized bed dryer, Food and Bioproducts Processing, (2012).

    28. Krzysztof Gornicki, Agnieszka Kaleta, Radosaw Winiczenko, Aneta Chojnacka, Evaluation of drying modelsof apple (var. Ligol) dried in a fluidized bed dryer, Energy Conversion and Management, 67, (2013), 179185.

    29. Tayfun Menlik, Mustafa Bahadr Ozdemir, Volkan Kirmaci , Determination of freeze-drying behavior ofapples by artificial neural network, Expert Systems with Applications, 37, (2010), 76697677.

    30. Somchart Soponronnarit, Thanit Swasdisevi, Somboon Wetchacama, Wivat Wutiwiwatchai, Fluidised beddrying of soybeans, Journal of Stored Products Research, 37, (2001), 133-151.

    31. Songchai Wiriyaumpaiwong, Somchart Soponronnarit, Somkiat Prachayawarakorn, Comparative study ofheating processes for full-fat soybeans, Journal of Food Engineering, 65, (2004), 371382.

    32. Somkiat Prachayawarakorna, Paveena Prachayawasina, Somchart Soponronnarit, Heating process of soybeanusing hot-air and superheated-steam fluidized-bed dryers,Food Science and Technology,39, (2006), 770778.

    33. Chalida Niamnuy, Mali Nachaisin, Juckamas Laohavanich, Sakamon Devahastin, Evaluation of bioactivecompounds and bioactivities of soybean dried by different methods and conditions, Food Chemistry, 129,

    (2011), 899906.

    34.Naret Meeso, Sakchai Dondee, Somchart Soponronnarit, Sirithon Siriamornpun, Reducing cracking andbreakage of soybean grains under combined near-infrared radiation and fluidized-bed drying, Journal of Food

    Engineering, 104, (2011), 613.

    35. Fernanda Ribeiro Gaspar Branco da Silva, Marcos de Souza, Alexandre Marconi de Souza da Costa, LuizMario de Matos Jorge, Paulo Roberto Paraiso, Experimental and numerical analysis of soybean meal drying in

    fluidized bed, Powder Technology, 229, (2012), 6170.

    36. Mohammad Hadi Khoshtaghaza, Hosain Darvishi, Saied Minaei, Effects of fluidized bed dry ing on the qualityof soybean kernels, Journal of the Saudi Society of Agricultural Sciences, (2013).

    37. Giner S.A., Torrez Irigoyen R.M., Drying-toasting kinetics of presoaked soybean in fluidized bed-Experimental study and mathematical modeling with analytical solutions, Journal of Food Engineering, 128,

    (2014), 3139.

    38. Ramesh M. N., Srinivasa Rao P. N., Drying Studies of Cooked Rice in a Vibro-fluidized Bed Drier, Journalof Food Engineering, 27, (1996), 389-396.

    http://www.sciencedirect.com/science/journal/00236438http://www.sciencedirect.com/science/journal/00236438
  • 5/22/2018 Reference

    4/12

    39. Izadifar M., Mowla D., Simulation of a cross-flow continuous fluidized bed dryer for paddy rice, Journal ofFood Engineering, 58, (2003), 325329.

    40. Mohammad Izadifar, Oon-Doo Baik, Carey J. Simonson Modeling of the packed bed drying of paddy riceusing the local volume averaging (LVA) approach, Food Research International, 39, (2006), 712720.

    41.Naret Meeso, Adisak Nathakaranakule, Thanid Madhiyanon, Somchart Soponronnarit, Influence of FIRirradiation on paddy moisture reduction and milling quality after fluidized bed drying , Journal of Food

    Engineering, 65, (2004), 293301.

    42. Somkiat Prachayawarakorn, Nattapol Poomsa-ad, Apichit Terdyothin, Somchart Soponronnarit, Investigationson head-rice yield and operating time in the fluidized-bed drying process: experiment and simulatio n, Journal

    of Stored Products Research, 41, (2005), 387400.

    43. Wathanyoo Rordprapat, Adisak Nathakaranakule, Warunee Tia, Somchart Soponronnarit, Comparative studyof fluidized bed paddy drying using hot air and superheated steam, Journal of Food Engineering, 71, (2005),

    2836.

    44. Bunyawanichakul P., Walker G.J., Sargison J.E., Doe P.E., Modeling and Simulation of Paddy Grain (Rice)Drying in a Simple Pneumatic Dryer, Biosystems Engineering, 96, (2007), 335344.

    45. Chaiyong Taechapairoj, Somchart Soponronnarit, Mattaneeya Chiawwet, Somkiat Prachayawarakorn,Patcharee Tungtrakul, Comparative study of physicochemical properties of accelerated and naturally aged

    rice, Journal of Food Engineering, 85, (2008), 268276.

    46. Atthajariyakul S., Leephakpreeda T., Fluidized bed paddy drying in optimal conditions via adaptive fuzzylogic control, Journal of Food Engineering, 75, (2006), 104114.

    47. Dariush Zare, Guangnan Chen, Evaluation of a simulation model in predicting the drying parameters for deep -bed paddy drying, Computers and Electronics in Agriculture, 68, (2009), 7887.

    48. Somkiat Prachayawarakorn, Petcharat Jaiboon, Sakamon Devahastin, Somchart Soponronnarit, Effects offluidized bed drying temperature and tempering time on quality of waxy rice , Journal of Food Engineering, 95,

    (2009), 517524.

    49. Chatchai Nimmol, Sakamon Devahastin, Evaluation of performance and energy consumption of an impingingstream dryer for paddy, Applied Thermal Engineering, 30, (2010), 2204-2212.

  • 5/22/2018 Reference

    5/12

    50.Navid Mostoufi, Navid Bizmark, Rahmat Sotudeh-Gharebagh, Hossein Ehsani, Sequential modeling offluidized bed paddy dryer, Journal of Food Engineering, 101, (2010), 303308.

    51. Weerachet Jittanit, Natthiga Saeteaw, Apinya Charoenchaisri, Industrial paddy drying and energy savingoptions, Journal of Stored Products Research, 46, (2010), 209-213.

    52. Thanit Swasdisevi, Weera Sriariyakula, Warunee Tia, Somchart Soponronnarit, Effect of pre-steaming onproduction of partially-parboiled rice using hot-air fluidization technique, Journal of Food Engineering, 96,

    (2010), 455462.

    53.Naruebodee Srisang, Warunee Varanyanond, Somchart Soponronnarit, Somkiat Prachayawarakorn, Effects ofheating media and operating conditions on drying kinetics and quality of germinated brown rice , Journal of

    Food Engineering, 107, (2011), 385392.

    54. Somkiat Prachayawarakorn, Petcharat Jaiboon, Sakamon Devahastin, Patcharee Tungtrakul, SomchartSoponronnarit, Effect of high-temperature fluidized-bed drying on cooking, textural and digestive properties of

    waxy rice, Journal of Food Engineering, 105, (2011), 8997.

    55. Siri Doungporna, Nattapol Poomsa-ad, Lamul Wiset, Drying equations of Thai Hom Mali paddy by using hotair, carbon dioxide and nitrogen gases as drying media Food and Bioproducts Processing, 90, (2012), 187198.

    56.Nordin Ibrahim M., Sarker M.S.H., Ab. Aziz N., Mohd. Salleh P., Energy and rice quality aspects duringdrying of freshly harvested paddy with industrial inclined bed dryer , Energy Conversion and Management, 77

    (2014), 389395

    57. Ocallaghan J. R., Menzies D. J., Bailey P. H., Digital Simulation of Agricultural Dryer Performance, Journalof Agricultural Engineering Research, 16, (1971), 223-244.

    58. Ghaly T. F., Van der Touwt J. W., Heat Damage Studies in Relation to High Temperature Disinfestations ofWheat, Journal of Agricultural Engineering Research, 27, (1982), 329-336.

    59. Ghaly T. F., Sutherland J. W., Heat Damage to Grains and Seeds Journal of Agricultural EngineeringResearch, 30, (1984), 337-345.

    60. Sergio A. Giner, De Michelis A., Evaluation of the Thermal Efficiency of Wheat Drying in Fluidized Beds:Influence of Air Temperature and Heat Recovery, Journal of Agricultural Engineering Research, 41, (1988),

    11-23.

  • 5/22/2018 Reference

    6/12

    61. Ozbey M., Soylemez M.S., Effect of swirling flow on fluidized bed drying of wheat grains , EnergyConversion and Management, 46, (2005), 14951512.

    62. Serpil Sahin, Leyla Nesrin Kahyaoglu, Gulum Sumnu, Physical properties of parboiled wheat and bulgurproduced using spouted bed and microwave assisted spouted bed drying, Journal of Food Engineering, 98,

    (2010), 159169.

    63. Thorpe G. R., The Thermodynamic Performance of a Continuous flow Fluidized Bed Grain Disinfestor andDryer, Journal of Agricultural Engineering Research, 37, (1987), 27-41.

    64. Debabandya Mohapatra, Sabyasachi Mishra, Current trends in drying and dehydration of foods, Journal ofFood Engineering, (2010), 311-352.

    65. Bayrock D., Ingledew W. M., Fluidized bed drying of bakers yeast: moisture levels, drying rates, and viabilitychanges during drying, Food Research International, 30, (1997), 407-415.

    66. Bayrock D., Ingledew W. M., Mechanism of viability loss during fluidized bed drying of bakers yeast, FoodResearch International, 30, (1997), 417-425.

    67. Ugur Yuzgec, Mustafa Turker, Ali Kanarya, Hamdi Kapucu, Zafer Senalp, Drying of bakers yeast in batchfluidized bed, Chemical Engineering and Processing, 45, (2006), 10191028.

    68. Haut B., Debaste F., Halloin V., Bossart L., A new modeling approach for the prediction of yeast drying ratesin fluidized beds, Journal of Food Engineering, 84, (2008), 335347.

    69. Yuzgec U., Koni M., Turker M., Dincer H., Kapucu H., Adaptive modeling of the drying of bakers yeast in abatch fluidized bed, Control Engineering Practice, 17, (2009), 503517.

    70. Mehmet Koni, Ugur Yuzgec, Mustafa Turker, Hasan Dincer, Optimal quality control of bakers yeast drying inlarge scale batch fluidized bed, Chemical Engineering and Processing, 48, (2009), 13611370.

    71. Keikhosro Karimia, Hamidreza Akbari, Magnus Lundin, Mohammad J. Taherzadeh, Optimization of bakersyeast drying in industrial continuous fluidized bed dryer, Food and Bioproducts processing, 90, (2012), 5257.

    72. Strumillo C., Kaminski W., Zbicinski I., Some aspects of the drying of protein products, The ChemicalEngineering Journal, 58, (1995), 197-204.

    73. Bosteels T., Tackaert W., Van Stappen G., Improved Use of the Fluidized Bed Dryer for Artemia Cysts,Aquacultural Engineering, 15, (1996), 169-179.

  • 5/22/2018 Reference

    7/12

    74. Kiranoudis C.T., Maroulis Z.B., Marinos-Kouris D., Drying of Solids: selection of some continuous operationdryer types, Comlmler-chem. Engg, 20, (1996), 177-182.

    75. Verdijck G. J. C., Weiss M., Preisig H. A., Modeling of a Pneumatic Dryer for Potato Starch, Journal of FoodEngineering, 37, (1998), 243-258.

    76. Christian Fyhr, Ian C. Kemp, Roland Wimmerstedt, Mathematical modeling of fluidized bed dryers withhorizontal dispersion, Chemical Engineering and Processing, 38, (1999), 8994.

    77. Christian Fyhr, Ian C. Kemp, Mathematical modeling of batch and continuous well-mixed fluidized beddryers, Chemical Engineering and Processing, 38, (1999), 1118.

    78. Wijesinghe B., Senadeera W., Bhandari B., Young G., Physical Properties and Fluidization behavior of freshgreen beanparticulates during Fluidized bed drying, Trans IChemE, 78, (2000).

    79. Krokida M.K., Kiranoudis C.T., Pareto design of fluidized bed dryers, Chemical Engineering Journal, 79,(2000), 112.

    80. Passos M.L., Mujumdar A.S., Effect of cohesive forces on fluidized and spouted beds of wet particles,Powder Technology, 110, (2000), 222238.

    81. Brennan J.G., Varnalis A.I., MacDougall D.B., A proposed mechanism of high temperature puffing of potato.Part I. The influence of blanching and drying conditions on the volume of puffed cubes , Journal of Food

    Engineering, 48, (2001), 361-367.

    82. Moreno R., Rios R., Study on Sawdust Drying Techniquesin Fluidized Bed, Biosystems Engineering, 82,(2002), 321329.

    83. Ibrahim Doymaz, Mehmet Pala, The thin-layer drying characteristics of corn, Journal of Food Engineering,60, (2003), 125130.

    84. Paul Malumba, Sylvanus Odjo, Joseph Dossou, Sebastien Janas, Franois Bera, Influence of drying andhydrothermal treatment of corn on the denaturation of salt-soluble proteins and color parameters, Journal of

    Food Engineering, 109, (2012), 561570.

    85. Hatamipour M.S., Mowla D., Correlations for shrinkage, density and diffusivity for drying of maize and greenpeas in a fluidized bed with energy carrier, Journal of Food Engineering, 59, (2003), 221227.

  • 5/22/2018 Reference

    8/12

    86. Bhesh R. Bhandari, Wijitha Senadeera, Gordon Young, Bandu Wijesinghe, Influence of shapes of selectedvegetable materials on drying kinetics during fluidized bed drying, Journal of Food Engineering, 58, (2003),

    277283.

    87. Zafer Gul M., Adnan Topuz, Mesut Gur, An experimental and numerical study of fluidized bed drying ofhazelnuts, Applied Thermal Engineering, 24, (2004), 15351547.

    88. Chalida Niamnuy, Sakamon Devahastin, Drying kinetics and quality of coconut dried in a fluidized bed dryer,Journal of Food Engineering, 66, (2005), 267271.

    89. Gikuru Mwithiga, Joseph Ochieng Olwal, The drying kinetics of kale (Brassica oleracea) in a convective hotair dryer, Journal of Food Engineering, 71, (2005), 373378.

    90. Gulum Sumnu, Emel Iraz Goksu, Ali Esin, Effect of microwave on fluidized bed drying of macaroni beads,Journal of Food Engineering, 66, (2005), 463468.

    91. Hatamipour M. S., Mowla D., Drying behavior of maize and green peas immersed in fluidized bed of inertenergy carrier particles, Trans IChemE, Part C, Food and Bioproducts Processing, 84, (2006), 220226.

    92. Walde S.G., Velu V., Jyothirmayi T., Math R.G., Effects of pretreatments and drying methods on dehydrationof mushroom, Journal of Food Engineering, 74, (2006), 108115.

    93. Kamarudin S.K., Tasirin S.M., Jaafar K., Lee K.F., The drying kinetics of birds chilies in a fluidized beddryer, Journal of Food Engineering, 79, (2007), 695705.

    94. Groenewold H., Tsotsas E., Drying in fluidized beds with immersed heating elements, Chemical EngineeringScience, 62, (2007), 481502.

    95. Gabas A.L., Cabral R.A.F., Telis-Romero J., Telis V.R.N., Finzer J.R.D., Effect of apparent viscosity onfluidized bed drying process parameters of guava pulp, Journal of Food Engineering, 80, (2007), 10961106.

    96.Nachiket Kotwaliwale, Pramod Bakane, Ajay Verma, Changes in textural and optical properties of oystermushroom during hot air drying, Journal of Food Engineering, 78, (2007), 12071211.

    97. Herman-Lara E., Ruiz-Lpez I.I., Martnez-Snchez C.E., Cobos-Vivaldo R., Mathematical modeling andsimulation of batch drying of foods in fixed beds with airflow reversal , Journal of Food Engineering, 89,

    (2008), 310318.

  • 5/22/2018 Reference

    9/12

    98. Abbasi Souraki B., Mowla D., Axial and radial moisture diffusivity in cylindrical fresh green beans in afluidized bed dryer with energy carrier: Modeling with and without shrinkage , Journal of Food Engineering,

    88, (2008), 919.

    99. Abbasi Souraki B., Mowla D., Experimental and theoretical investigation of drying behavior of garlic in aninert medium fluidized bed assisted by microwave, Journal of Food Engineering, 88, (2008), 438449.

    100.Helene Desmorieux, Clia Diallo, Yzouma Coulibaly, Operation simulation of a convective and semi-industrial mango dryer, Journal of Food Engineering, 89, (2008), 119127.

    101.Mowla D., Hashemi G., Kazemeini M., Moisture diffusivity and shrinkage of broad beans during bulk dryingin an inert medium fluidized bed dryer assisted by dielectric heating, Journal of Food Engineering, 92, (2009),

    331338.

    102.Alireza Yadollahinia, Mehdi Jahangiri, Shrinkage of potato slices during drying, Journal of FoodEngineering, 94, (2009), 5258.

    103.Marek Markowski, Ireneusz Biaobrzewski, Agnieszka Modrzewska, Kinetics of spouted-bed drying of barley:Diffusivities for sphere and ellipsoid, Journal of Food Engineering, 96, (2010), 380387.

    104.Janjai S., Mahayothee B., Lamlert N., Bala B.K., Precoppe M., Nagle M., Mller J., Diffusivity, shrinkage andsimulated drying of litchi fruit (Litchi Chinensis Sonn.), Journal of Food Engineering, 96, (2010), 214221.

    105.Renata de Aquino Brito Lima, Maria do Carmo Ferreira, Fluidized and vibrofluidized shallow beds of freshleaves, Particuology, 9, (2011), 139147.

    106.Prietoa W. H., Iguti A. M., Nitz M., Drying evaluation of green coconut pulp for obtaining a snack-likeproduct, ProcediaFood Science, 1, (2011), 16181627.

    107.Pongjet Promvonge, Amnart Boonloi, Monsak Pimsarn, Chinaruk Thianpong, Drying characteristics ofpeppercorns in a rectangular fluidized-bed with triangular wavy walls, International Communications in Heat

    and Mass Transfer, 38, (2011), 12391246.

    108.Milan Stakic, Tijana Urosevic, Experimental study and simulation of vibrated fluidized bed drying, ChemicalEngineering and Processing, 50, (2011), 428437.

    109.Shahari N., Hibberd S., Mathematical Modelling of Shrinkage Effect During Drying of Food, IEEEColloquium on Humanities, Science & Engineering Research, (2012).

  • 5/22/2018 Reference

    10/12

    110.Pavon-Melendez, G et al, Dimensionless analysis of the simultaneous heat and mass transfer in food drying.Journal of Food Engineering, 51, (2002), 347-353.

    111.Nilnont W., Thepaa S., Janjai S., Kasayapananda N., Thamrongmasb C., Balac B.K., Finite element simulationfor coffee (Coffea arabica) drying, Food and bioproducts Processing, 90, (2012), 341350.

    112.Ville Rimpilainen, Lasse M. Heikkinen, Marko Vauhkonen, Moisture distribution and hydrodynamics of wetgranules during fluidized-bed drying characterized with volumetric electrical capacitance tomography,

    Chemical Engineering Science, 75, (2012), 220234.

    113.Sharareh Salar-Behzadi, Stefanie Stummer, Stefan Toegel, Marie-Christin Rabenreither, Frank M. Unger,Michael Wirth, Helmut Viernstein, Fluidized-bed drying as a feasible method for dehydration of Enterococcus

    faecium M74, Journal of Food Engineering, 111, (2012), 156165.

    114.Srinivas G., Pydi Setty Y., Drying behavior of uniform and binary mixture of solids in a batch fluidized beddryer, Powder Technology, 241, (2013), 181187.

    115.Chuanping Liu, Li Wang, Ping Wu, Fei Xiang, Size distribution in gas vibration bed and its application ongrain drying, Powder Technology, 221, (2012), 192198.

    116.Ibrahim Alaathar, Ernst-Ulrich Hartge, Stefan Heinrich, Joachim Werther, Modeling and flow sheet simulationof continuous fluidized bed dryers, Powder Technology, 238, (2013), 132141.

    117.Burgschweiger J., Tsotsas E., Experimental investigation and modeling of continuous fluidized bed dryingunder steady-state and dynamic conditions, Chemical Engineering Science, 57, (2002), 50215038.

    118.Somchart Soponronnarit, Chalida Niamnuy, Sakamon Devahastin, Some recent advancesin microstructuralmodification and monitoring of foods during drying: A review , Journal of Food Engineering, 123, (2014),

    148156.

    119.Chandrasekaran S., Ramanathan S., Tanmay Basak, "Microwave food processingA review", Food ResearchInternational, 52, (2013), 243261.

    120.Maskan. M. "Drying, shrinkage and rehydration characteristics of kiwifruits during hot air and microwavedrying", Journal of Food Engineering, 48, (2001), 177182.

    121.Ali Khan M., Yashwant Kumar, Sadaf Zaidi, Iffat Ali, Microwave Assisted Fluidized Bed Drying ofBeetroot, Drying Technology, (2009).

  • 5/22/2018 Reference

    11/12

    122.Emam-Djomeh Z., Askari G.R., Mousavi S.M., Heat and mass transfer in apple cubes in a microwave-assistedfluidized bed dryer, Food and Bioproducts Processing, 344, (2012).

    123.Momenzadeh L., Zomorodian A., Study of Shelled Corn Shrinkage in A Microwave -Assisted Fluidized BedDryer Using Artificial Neural Network, International Journal of Agriculture Sciences, 3, (2011), 150-155.

    124.Funebo, T., Ohlsson T., "Microwave-assisted air dehydration of apple and mushroom", Journal of FoodEngineering, 38, (1998), 353367.

    125.Maskan, M., "Microwave/air and microwave finish drying of banana", Journal of Food Engineering, 44, (2000),7178.

    126.Silva, F. A., Marsaioli A., Jr., Maximo G. J., Silva M. A. A. P., Goncalves L. A. G., "Microwave assisteddrying of macadamia nuts", Journal of Food Engineering, 77, (2006), 550558.

    127.Ranjbaran M., Zare D., "Simulation of energetic- and exergetic performance of microwave-assisted fluidizedbed drying of soybeans", Energy, 59, (2013), 484-493.

    128.Zielinskaa M., Zapotoczny P., Alves-Filho O., Eikevik T.M., Blaszczak W., "A multi-stage combined heatpump and microwave vacuum drying of green peas", Journal of Food Engineering, 115, (2013), 347356.

    129.Naret Meeso, Adisak Nathakaranakule, Thanid Madhiyanon and Somchart Soponronnarit, Influence of FIRirradiation on paddy moisture reduction and milling quality after fluidized bed drying , Journal of Food

    Engineering, 65, (2004), 293301.

    130.Sakchai Dondee, Naret Meeso, Somchart Soponronnarit, Sirithon Siriamornpun, Reducing cracking andbreakage of soybean grains under combined near-infrared radiation and fluidized-bed drying, Journal of Food

    Engineering, 104, (2011), 613.

    131.Kalathur Harishchandra Vishwanathan, Girish Kempanna Giwari, Hunglur Umesh Hebbar, Infrared assisteddry-blanching and hybrid drying of carrot, Food and Bioproducts Processing, 91, (2013), 89-94.

    132.Ratiya Thuwapanichayanan, Somkiat Prachayawarakorn, Somchart Soponronnarit, "Heat and moisturetransport behavior and quality of chopped garlic undergoing different drying methods", Journal of Food

    Engineering, 136, (2014), 3441.

    133.Congcong Xu, Yunfei Li, Huaning Yu, "Effect of far-infrared drying on the water state and glass transitiontemperature in carrots", Journal of Food Engineering, 136, (2014), 4247.

    http://www.sciencedirect.com/science/article/pii/S0960308512001009http://www.sciencedirect.com/science/article/pii/S0960308512001009http://www.sciencedirect.com/science/article/pii/S0960308512001009http://www.sciencedirect.com/science/article/pii/S0960308512001009http://www.sciencedirect.com/science/article/pii/S0960308512001009http://www.sciencedirect.com/science/article/pii/S0960308512001009
  • 5/22/2018 Reference

    12/12

    134.Bengang Wu, Zhongli Pan, Wenjuan Qu, Bei Wang, Juan Wang, Haile Ma, "Effect of simultaneous infrareddry-blanching and dehydration on quality characteristics of carrot slices", LWT - Food Science and

    Technology, 57, (2014), 90-98.

    135.Yun Deng, Yuegang Wang, Jin Yue, Zhenmin Liu, Yuanrong Zheng, Bingjun Qian, Yu Zhong, Yanyun Zhao,"Thermal behavior, microstructure and protein quality of squid fillets dried by far-infrared assisted heat pump

    drying", Food Control, 36, (2014), 102-110.

    136.Seung-Cheol Lee and Hyun-Gyun Yuk, Effect ofFar-Infrared Irradiation on Catechin Contents of Green Tea,Tea in Health and Disease Prevention, 18, (2013), 213-221.

    137.Garcia Perez J.V., Carcel J.A., de la Fuente-Blanco S., Riera-Franco de Sarabia E., Ultrasonic drying offoodstuff in a fluidized bed: Parametric study, Ultrasonics, 44, (2006), 539543.

    138.Gallego-Jurez J. A., Riera E., Blanco S. F., Rodrguez-Corral G., Acosta-Aparicio V. M., Blanco A.,"Application of high-power ultrasound for dehydration of vegetables: Processes and devices", Drying

    Technology, 25(11), (2007), 18931901.

    139.De la Fuente-Blanco S., Riera-Franco de Sarabia E., Acosta-Aparicio V. M., Blanco-Blanco A., Gallego-Jurez,J. A., "Food drying process by power ultrasound", Ultrasonics, 44, (2006), 523527.

    140.Yunhong Liu, Cuijuan Chong, Jianye Wu, Shuai Miao, Lei Luo, Xin Li, Ultrasound Assisted OsmoticDehydration Pretreatment on Carrot Followed by Hot-air Drying, Proceedings of the 2013 International

    Conference on Advanced Mechatronic Systems, Luoyang, China, (2013).

    141.Groenewold H., Tsotsas E., Drying in fluidized beds with immersed heating elements , Chemical EngineeringScience, 62, (2007), 481502.

    142.Krishna Kumar Patel,Abhijit Kar,Heat pump assisted drying of agricultural produce - an overview Journal ofFood Science Technology, 49, (2012), 142160.

    143.Serpil Sahin, Gulum Sumnu and Ferihan Tunaboyu, Usage of solar-assisted spouted bed dryer in drying ofpea, Food and Bioproducts Processing, (2012).

    144.John Bosco Kawongolo, "Phase Change Boundary Condition for Heat Conduction Problem:The DryingProblem", http://www.egr.msu.edu/~raguin/ME812/FinalProjects/Kawongolo_FinalProject.htm.

    http://www.ncbi.nlm.nih.gov/pubmed/?term=Patel%20KK%5Bauth%5Dhttp://www.ncbi.nlm.nih.gov/pubmed/?term=Patel%20KK%5Bauth%5Dhttp://www.ncbi.nlm.nih.gov/pubmed/?term=Patel%20KK%5Bauth%5Dhttp://www.ncbi.nlm.nih.gov/pubmed/?term=Kar%20A%5Bauth%5Dhttp://www.ncbi.nlm.nih.gov/pubmed/?term=Kar%20A%5Bauth%5Dhttp://www.ncbi.nlm.nih.gov/pubmed/?term=Kar%20A%5Bauth%5Dhttp://www.ncbi.nlm.nih.gov/pubmed/?term=Patel%20KK%5Bauth%5D