(Redox). 1. Synthesis 2. Decomposition 3. Single Replacement 4. Double Replacement *...

31
(Redox)

Transcript of (Redox). 1. Synthesis 2. Decomposition 3. Single Replacement 4. Double Replacement *...

Page 1: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

(Redox)

Page 2: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

1. Synthesis2. Decomposition3. Single Replacement4. Double Replacement* Combustion

Page 3: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

assigned to atoms or ions as a way to keep track of electron transfers

Page 4: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

The oxidation number for each atom in free elements is always zero (ex: H2, Na, S8)

The oxidation numbers of ions are the same as the charge on the ion. In MgCl2 the Mg+2 ion has an oxidation number of +2. Each of the two Cl- ions has an oxidation number of –1.

Page 5: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Group 1 metals always have a +1 oxidation number.

Group 2 metals always have a +2 oxidation number.

Page 6: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Oxygen has a –2 oxidation number in practically all of its compounds. The exceptions are in peroxides, such as H2O2 and Na2O2 where the oxidation number is –1 and in compounds with fluorine (OF2) in which it is +2.

Page 7: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Hydrogen has an oxidation number of +1 in all its compounds except metal hydrides formed with Group 1 and Group 2 metals, which it is –1.

Page 8: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

The sum of the oxidation numbers in a compound must be zero.

The sum of the oxidation numbers in a polyatomic ion must be equal to the charge on the ion. In the CO3

2- ion, the three oxygens provide a total of –6; the carbon must then be +4.

Page 9: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Situation 1: Find the oxidation numbers of N and O in N2O.

Page 10: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Situation 2: Find the oxidation numbers of K, Mn and O in KMnO4.

(next slide for chart)

Page 11: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Element

K Mn O4

Each

Total

Page 12: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

reactions in which both oxidation and reduction occur

Page 13: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

the loss of electrons by an atom or an ion, increasing the oxidation number

Ex: Na0 Na+1(Na loss 1e-)Na Na+1 + 1e-

Ex: O-2 O0 (O loss 2e-)

Page 14: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

the gain of electrons by an atom or an ion, reducing the oxidation number

Ex: F0 F-1 (F0 gain 1e-)F0 + 1e- F-1

Ex: Ca+2 Ca0 (Ca+2 gained 2e-)

Page 15: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

LEO (Lose Electrons Oxidations)

 oxidation # increases oxidation # decreasesGER (Gain Electrons Reduction)

LEO the lion says GER!

Page 16: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

◦Electronic equations or equations in which only the atoms/ions being oxidized or reduced are shown.

 

Ex: 2Al0 + 3Cl20 = 2Al+3Cl3

-1

Page 17: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Oxidation ½: Al0 → Al+3 + 3e-

Reduction ½: Cl20 + 2e- → 2Cl-1

Page 18: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Must conserve the number of electrons!

Number of electrons lost equals number of electrons gained

Page 19: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Oxidizing Agent: causes something else to undergo oxidation by taking on its electrons. This is the substance reduced.

Reducing Agent: causes something else to undergo reduction by giving its electrons. This is the substance oxidized.

Page 20: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

ions that are not changed during a redox reaction

Page 21: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Identifying Redox Reactions Once oxidation numbers are assigned, the atom that has shown an increase can be identified as the one that has undergone oxidation. The atom that has a decrease in oxidation number can be identified as the one that has undergone reduction.

Page 22: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

*Double Replacement reactions are never redox reactions because NOTHING CHANGES!

Ex: HCl + NaOH = NaCl + H2O

Page 23: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Table J – Reactivity Series of Selected Metals and Nonmetals

Lithium will react more readily with a nonmetal than will any other metal on the list.

Hydrogen (not a metal!!) is shown on the metal side to illustrate what metals will react with acids and which will not. All metals above hydrogen will react spontaneously with acids, while those below hydrogen will not.

Page 24: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

if a reaction proceeds to completion without adding energy sources once it is started, then it is spontaneous

Page 25: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

You must have something to oxidize and something to reduce.

Mg(s) and Al(s) can only be oxidized

Mg+2 (aq) and Al+3(aq) can only be reduced

*One metal must be neutral, the other an ion!!!

Page 26: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Cu(s) + Al(s) = no rxn both cannot be oxidized

2Cr+3 + 3Mn(s) = 3Mn+2 + 2Cr(s)Cr+3 + Ni(s) = no rxn Ni is lower than Cr on Table J, must be higher.

Page 27: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Again, there must be something to oxidize and something to reduce:

F2 and Cl2 can only be reducedF- and Cl- can only be oxidized

Page 28: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Cl2 + Br2 = no rxn – can’t both be reduced

Cl2 + 2Br- = 2Cl- + Br2

I2 + Br- = no rxn I is lower on the table than Br, must be higher

Page 29: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

HCl + Au(s) = Au will not react with H   HCl + Sr(s) = SrCl2 + H2 Yes because Sr is more likely to oxidize than

H2   2Na(s) + ZnCl2(aq) = NaCl + Zn Yes because Na is higher on Table J so it will

oxidize while Zn reduces.  

Page 30: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

Voltaic Cells: ½ cells of 2 different metals connected by wires – produces electricity. These are batteries which redox is spontaneous. Electrons flow from the metal being oxidized

(reducing agent) to the ion being reduced (oxidizing agent).

Salt Bridge: functions to complete the circuit by allowing ions to flow from reducing side to oxidizing side.

Diagram: Which reaction is occurring in the cell? Zn(s) + Cu+2 = Zn+2 + Cu(s) or Zn+2 + Cu(s) = Zn(s) + Cu+2

The anode is Zn0 and the cathode is Cu+2

lectrochemical Cells

Page 31: (Redox).  1. Synthesis  2. Decomposition  3. Single Replacement  4. Double Replacement  * Combustion.

electricity is used to produce a nonspontaneous redox reaction. Electricity is required! This is not spontaneous!! Requires the use

of a Battery. The anode is connected to the and the cathode is connected to the

Examples: Electroplating Diagram:         *The only way to get a group one metal in its

elemental form is by electrolysis of their fused salts. Example: KBr = K(s) + Br2(s)