RADIO + MCU + FLASH + USBLow-Power RF System-on-Chip RADIO + MCU + FLASH + USBLow-Power RF System-on-Chip

Erling SimensenProduct Marketing Low-Power RF

Erling SimensenProduct Marketing Low-Power RF Embargoed

Until October 29, 2007

History of Chipcon

19961996 19971997 19981998 19991999 20002000 20012001 20022002 20032003 20042004 20052005

Chipcon foundedChipcon founded

Design houseDesign house

Fabless semiconductor companyFabless semiconductor company

From ASIC to ASSPFrom ASIC to ASSP

Global expansionGlobal expansion

CMOS enables technology leadershipCMOS enables technology leadership

ASSPs dominate revenueASSPs dominate revenue

World’s first on ZigBeeWorld’s first on ZigBee

Acquired Figure8 Wireless Inc.Acquired Figure8 Wireless Inc.

ZigBee leaderZigBee leader

20062006

TI + ChipconTI + Chipcon

ConsumerIndustrial

ZigBee

Key Markets

Global FrequenciesGlobal Frequencies

The CC1111 is the industry’s first sub-1 GHz RF system-on-chip (SoC) with an integrated USB controller, enabling a fast and easy bridge between PCs and RF.

The integration of a high-performance radio, microcontroller, flash memory and USB controller results in smaller PCB size, easier assembly, reduced overall system cost and faster time-to-market.

The CC1111 is pin- and register-compatible with the CC1110 (sub-1 GHz SoC), CC2511 (2.4 GHz SoC with USB) and CC2510 (2.4 GHz SoC) to deliver solutions for both sub-1 GHz and 2.4 GHz frequency ranges.

MarketLeadership

MarketLeadership

CC1111 Low-Power RF SoC with USB ControllerCC1111 Low-Power RF SoC with USB Controller

Combined with TI’s SimpliciTI™ network protocol, the CC1111 provides easy development and improved low-power designs for wireless sensor networking applications.

CompleteIntegrationComplete

Integration

SoC FamilySoC Family

Tools and Software

Tools and Software

CC1111Low-Power RF SoC with USB ControllerCC1111Low-Power RF SoC with USB Controller

CC1111 Features Radio + MCU+ Flash +USB = SoC Includes CC1101 transceiver frequency

synthesizer that supports 1.2 Kbps – 500 Kbps data rate and multiple modulation formats

Enhanced MCU, 8/16/32KB Flash and 1/2/4KB RAM

Built-in full-speed USB 2.0-compliant interface Built-in AES-128 encryption and decryption co-

processor Sleep current consumption of 0.3 µA

Benefits Complete low-cost solution on one single

chip SoC provides smaller PCB size, easier

assembly and faster time-to-market No external processor needed for secure

communciation Can connect directly to a PC Robust and secure link with good noise

immunity

Applications Alarm and security systems Automatic meter reading Industrial monitoring and control Home and building automation Remote controls And many more

Application ExampleApplication Example

Wireless Audio System Block Diagram

Microphone

Speaker

1.5V Alkaline Battery

CC1111F8

CC1110F8

TPS76933

TPS61003

TLV320AIC26

CodecI2S

Full SpeedUSB 2.0

Power from USB

Product RoadmapSub-1 GHz and 2.4 GHz SoC FamilyProduct RoadmapSub-1 GHz and 2.4 GHz SoC Family

CC1010

Integration

Frequency

CC2550CC1150

CC1100

CC1050

CC1000

CC2431

CC2400CC1021

CC1070

ZigBee and IEEE 802.15.4Proprietary narrowband

CC2500CC2420CC1020

< 1 GHz 2.4 GHz

Tra

nsm

itte

rT

ran

scei

ver

Sys

tem

-on

-Ch

ip

CC1110 CC2510

CC1111 CC2511

CC2430

CC1101

Proprietary Proprietary

CC1111 Tools and SupportCC1111 Tools and Support

www.ti.com/cc1111

Get Started Today

Datasheets & User Manual

Development Kits & Samples

SimpliciTI™ Network Protocol

Technical/Applications Support

Application Examples & Interface Libraries

Low-Power RF and ZigBee Training

Development Tools

White Papers Describing Location Algorithm

Low-Power RF Developer Network

Development Kit Contents

• 2x SmartRF04EB

• 2x CC1110EM

• 1x CC1111EM USB dongle

• 2x antennas

• cables

SimpliciTI™ Network ProtocolSimpliciTI™ Network Protocol

SimpliciTI™ Network Protocol SimpliciTI is a proprietary low-power RF

network protocol aimed at small, low-power RF networks

Resource requirements (MCU) are minimal which results in low system cost

Easy implementation and deployment

Low-power MCUs and RF chips are not enough to achieve low power consumption in end applications. A well engineered low-power RF protocol is essential

TI wants to help the customer all the way from idea to mass production

Runs out-of-the-box on several TI RF platforms: A small MSP430 + latest CC transceivers or our new 8051 RF SoCs

• Range can be extended through repeaters

• The circles represent range of gateway and extended range of repeaters

Tools: Packet SnifferTools: Packet Sniffer

Packet Sniffer

General packet sniffer available, runs on the dev kits

Already supports SimpliciTI network protocol

Packet sniffer can be used with all application examples, not just SimpliciTI

The packet sniffer visualizes all RF traffic and content in a graphical format.

Each packet receives a time stamp and RF protocol flow can be inspected in chronological order

Tools: SmartRF StudioTools: SmartRF Studio

SmartRF Studio

Full support for all four SoCs

Supports code export of all registers

RX and TX packet testing can be done with any RF setting

Includes suggested RF settings which are characterized (”preferred settings”)

Questions?