R VictorTaichung - Gibas brochure VturnII-16_20_23... · • 0.2 second real turret indexing time...

• Increased rigidity using one piece casting with integral box-ways!

• Increased productivity using servo-driven turrets and fast traverse rate!

• Increased angular accuracy using DDS spindle for C axis and live tooling!

• Increased performance using Fanuc 0i-T control with color graphics!

• Increased flexibility with optional sub-spindle and gantry loading system!

16/20/23/2616/20/23/26

Victor Taichung - an established ISO 9001 & 14001 company

Rheinland ISO 9001 Certificate approvedTÜV

DIN EN ISO 9001DIN EN ISO 14001



DIN EN ISO 9001DIN EN ISO 14001


R

VictorTaichungR

VictorTaichung

11

The constant demand to reduce manufacturing costs is reflected in Victor Taichung new generation lathes

Vturn II-16/20/23/26 where the aim has been minimized part throughput time. Whilst in addition providing options

that will offer increased all-around performance to enhance machining processes. The new Vturn II lathes have a high degree

of stability from one piece Meehanite casting which was developed through CAE design and has integral box slideways that absorb dampen

stress and heat throughout the entire structure.

High power and high torque spindle

• Rectangular machine base guarantees the optimal

structure stiffness to assure the rapid feed rate 24

m/min on the lathes with box slideways.

• Homogenous casting distributes stress thru-out

structure.

• Meehanite gray cast iron for optimum

damping properties.

• Optimum ribbing determined by FEM to

minimize distortion during operation.

• To ensure perfect alignment in the

machine structure the bed is machined

in a single set-up on a large five-face

machining center.

Single block cast bed

(rpm)

P1

Power (kw)

P2P3

P4

S1 S2 S3 S4 (rpm)S1 S2 S3 S4

T1T3T2

T4

Torgue (kg-m)

(rpm)

P1

Power (kw)

P2P3

P4

S1 S2 S3 S4 (rpm)S1 S2 S3 S4

T1T3T2

T4

Torgue (kg-m)

P1 (*30 min. in low winding)P2 (cont. in low winding) P3 (*30 min. in high winding) P4 (cont. in high winding)

S1 (base RPM in low winding)S2 (base RPM in high winding)S3 (max. RPM in low winding)S4 (max. RPM in high winding)

T1 (*30 min. in low winding)T2 (cont. in low winding) T3 (*30 min. in high winding) T4 (cont. in high winding)


*30 min. may be replaced by 15%, 15 min or 20 min. according to Fanuc specification

ModelSpindle

Motor

Base Speed

(rpm)

Max.Speed

(rpm)

P. Cont.

(kw)

P.

(kw)

Tor. Cont.

(kg-m)

Tor.

(kg-m)

VturnII-16 aP22iLow winding 500 1500 7.5 15 (15 min.) 14.6 29.2 (15 min.)High winding 750 6000 11 15 (30 min.) 14.38 19.6 (30 min.)



VturnII-26 aP30iLow winding 310 1500 11 18.5 (15 min.) 34.5 58 (15 min.)High winding 446 3500 15 18.5 (30 min.) 32.7 40.3 (30 min.)

Opt. aP40iLow winding 216 1500 13 22 (15 min.) 58.5 98.9 (15 min.)High winding 310 3500 18.5 22 (30 min.) 58 68.9 (30 min.)

• Greater rapid feed rates 20/24 m/min on X/Z axes

redures turning cycle time.

• Accomplished by increased motor speed & power while

maintaining high thrust force for the cutting tool.

• 0.2 second real turret indexing time by Servo-driven

turret designed to unclamp and clamp during axis

retraction and approach.

Increased productivity

2

• Heavy body casting to soak up vibrations.

• Slideway mounted with hydraulic clamping.

• Fully programmable with turret "tow along" for

tailstock body.

• Easy extension to install DDS sub-spindle with

dual winding assures the best collinear accuracy

without re-clamping.

Fully programmable tailstock (or sub-spindle) for easy autom

• Large bearing area to absorb cutting vibrations.

• Hand scraped wedge structure maintains trapped

film of oil between slideway and undercarriage for

smooth & even travel.

• Integral slideway allows even heat distribution.

• Improved ballscrew stiffness and axis thrust

force by minimizing pitch.

• Pre-tensioned double anchored balls crews

allow heat absorption without displacement.

• Direct coupled high powered servo motors.

~ Std.

~ B (V)

High performance drives on X and Z axes

Box slideways with auto. forced lubrication

3

Based on the popularity of our older Vturn series lathes, we have

also introduced an Vturn II-16/20/23/26CV offering C-axis spindle

and live tooling to allow for secondary operations such as milling and drilling to be

completed on a single machine. The Vturn II lathes equipped with brake to ensure spindle is rigidly held during

heavy operations offers a full C-axis spindle with 0.001° indexing through the full 360° of the workpieces.

• Oil cooling for DDS spindle with

cast in cooling fins on headstock

to minimize heat build-up in the

the motor.

• The headstock in a jacket of a constantly chilled

oil coolant that prevents the headstock from

reaching the elevated temperatures that causes

thermal expansion and degrades precision.

Spindle oil coolerOil coolant

Oil coolant

High power and high torque spindle

(rpm)

P1

Power (kw)

P2P3

P4

S1 S2 S3 S4 (rpm)S1 S2 S3 S4

T1T3T2

T4

Torgue (kg-m)

(rpm)

P1

Power (kw)

P2P3

P4

S1 S2 S3 S4 (rpm)S1 S2 S3 S4

T1T3T2

T4

Torgue (kg-m)

P1 (*30min. in low winding)P2 (cont. in low winding) P3 (*30min. in high winding) P4 (cont. in high winding)


T1 (*30min. in low winding)T2 (cont. in low winding) T3 (*30min. in high winding) T4 (cont. in high winding)


*30 min. may be replaced by 15%, 15 min or 20 min. according to Fanuc specification

• The spindle motor is integrated in the spindle to eliminate the

vibrations from the belt or gear drives. This improves the spindle

run-out and leads to a greater surface finish and roundness.

• The integral unit has lower inertia than traditional drives to allow

faster acceleration time and to improve overall efficiency.

• Dual winding DDS spindle (similar as a 2-step gearbox installed)

offers extra torque output at low spindle speed than conventional

belt-driven spindle.

• Angular encoder is installed as standard to assure the angular

accuracy on the spindle.

ModelSpindle

Motor

Base Speed

(rpm)Max.Speed (rpm)

P. Cont.

(kw)

P.

(kw)

Tor. Cont.

(kg-m)

Tor.

(kg-m)

VturnII-16CV a B160MiLow winding 300 900 5.5 7.5 (15%) 17.8 24.3 (15%)High winding 850 6000 11 18.5 (15%) 12.6 21.2 (15%)

VturnII-20&23CV aB180MiLow winding 450 800 11 15 (20 min.) 23.8 32.4 (20 min.)High winding 806 4200 11 15 (30 min.) 13.3 18.2 (30 min.)

VturnII-26CV aB200MiLow winding 485 900 15 22 (30 min.) 30.1 44.2 (30 min.)High winding 900 3500 15 22 (30 min.) 16.2 23.8 (30 min.)

Direct Drive Spindle (DDS) motor with Cs axis design

4

• Fast tool indexing time 0.2 seconds using servo driven turret.

• Maximum milling speed of 3000rpm by servo motor maintains

a near constant torque output over the complete speed range.

• 12 station VDI turret with 6 or 12 live tool pockets allows quick

tool changeover with commercially available tool holders (by

Duplomatic servo turnets or Sauter hydranlic turrets).

• Vturn II-23/26BCV with full C-axis capability sub-spindle is

fitted with 12 station live tool pockets capable of back face

machining.

• Optional Y axis VDI turret with

travel ±45mm (for Vturn II-16/20)

or ±55mm (for Vturn II-23/26) can

be installed for more sophisicated

turning applications.

Servo-driven turret for faster indexing

• C axis for both spindle and sub-spindle maximum the

application range.

• DDS sub-spindle with dual winding assures the best

collinear accuracy without re-clamping.

• Changeover time 3 seconds (P-P) from the main

spindle to the sub-spindle.

• Rectangular machine base guarantees the optimal structure

stiffness to sustain the high rapid feed rate 20/24 (X/Z) m/min on

the lathes with box slideways.

• Homogenous casting distributes stress thru-out structure

• Meehanite gray cast iron for optimum damping properties.

• Optimum ribbing determined by FEM to minimize distortion

during operation.

• To ensure perfect alignment in the machine structure, the bed

is machined in a single set-up on a large five-face machining

center.

Single block cast bed

• Heavy body casting to absorb vibrations.

• Slideway mounted with hydraulic clamp.

• Fully programmable with turret "tow along" for tailstock body.

Fully programmable tailstock for easy automation

~ CV

~ BCV

~ Y(B)

Optional subspindle and C-axis with live tooling

5

The proven reliability of Fanuc 0i-T controller is combined with

Victor's own custom designed PLC to offer the customer an integral

control system with utmost reliability.

Optional 21i-T/18i-T control allows easier upgrades for the addition

of full conversational programming.

Fully programmable tailstock for easy automation.

• Heavy body casting to soak up vibrations.

• Slideway mounted with hydraulic clamp.

• Fully programmable with turret "tow along" for tailstock body.

S T a n D a r D a C C e S S O r I e S

Chip conveyor & cart

Separate chip conveyor can be positioned to expel chips from

the traditional side of the machine for easy cleaning or even

from the rear of the machine to reduce costly shop floor space

requirement.

Powerful hydraulic chuck

• Hydraulic 3 jaw hollow chuck is foot operated for safe and easy operation

• Back pressure settings

Fully enclosed guarding with the chip conveyor

fitted into the machine bed ensures no access

to the machine during operation and no coolant

leakages.

Hydraulic gauges on the front so they can be

easily monitored during operation.

Coolant tank can also be accessed from the

front of the machine.

ergonomic design for safe & easy operation

reliable Fanuc 0i-T control system

No longer the need to perform tedious time consuming cuts to

determine tool geometry. The operator needs only to touch the tool tip

to the tool presetter sensor (Renisahw repeatable arm with RP3 probe)

to get the tool geometries once the reference tool is determined. While

not only reducing tool set-up time, manual tool presetter also reduces

down time due to tool breakage.

Tool presetter (renishaw)

Parts catcher (swing type) To enhance the machine's productivity, a parts catcher is available to work

in conjunction with bar feed interface. This type of fully programmable parts

catcher is mounted next to the chuck with a hydraulic actuator to rotate the

extending rod bolted with the catching bucket which rests against the door of the machine

during machining. This bucket can also catch the part from the sub-spindle.

A sub-spindle with 6" chuck as standard and DDS motor can be added with the machine

designated Vturn II-23 & 26B or Vturn II-23 & 26BCV. The sub-spindle allows back face

machining to be completed in a single set-up giving a real reduction in machine idle time.

The sub-spindle is driven forward using its own servo-drive, with synchronous rotation

between both spindles used to automatically transfer the part.

As the sub-spindle also uses a DDS motor with dual winding, both big cutting torque and

high angular accuracy are also possible during rear face turning. This machine within sub-

spindle is fitted with 12 station VDI turret capable of back face machining.

Sub-spindle extension

The machine has been designed to facilitate

the easy addition of gantry loaders to build

a completely automated machining cell. The

gantry loader can be either added as a stand-

alone type to give greater flexibility or can be

built on to the machine for a more compact

machining cell.

Fa - stand alone or integrated gantry loader

Vturn II-23/26B (CV) Sub spindle output diagram

(rpm)

P1

Power (kw)

P2P3

P4

S1 S2 S3 S4 (rpm)S1 S2 S3 S4

T1T3T2

T4

Torgue (kg-m)

(rpm)

P1

Power (kw)

P2P3

P4

S1 S2 S3 S4 (rpm)S1 S2 S3 S4

T1T3T2

T4

Torgue (kg-m)

P1 (15% in low winding)P2 (cont. in low winding) P3 (15% in high winding) P4 (cont. in high winding)


T1 (15% in low winding)T2 (cont. in low winding) T3 (15% in high winding) T4 (cont. in high winding)


Spindle

Motor

Base Speed

(rpm)Max.Speed (rpm)

P. Cont.

(kw)

P.

(kw)

Tor. Cont.

(kg-m)

Tor.

(kg-m)

aB160MiLow winding 300 900 5.5 7.5 (15%) 17.8 24.3 (15%)High winding 850 4500 (Opt. 6000) 11 18.5 (15%) 12.6 21.2 (15%)

6

O P T I O n a L a C C e S S O r I e S

7

For direct mounting on turret

Mounting blockTaper slice

Coolant block

Turret disc

Clamp block

Face & O.D cutting

tool holder

Face & I.D cutting

tool holder

O.D & Face tool

I.D & Face tool

"U" Drill

"U" Drill Socket

Boring bar sleeve

Boring bar sleeve

Drill socket (MT#)

Large dia. boring bar

Small dia. boring bar

Drill

Boring bar/drill holder

Tooling system

• Hydraulic chuck with soft jaws

• Programmable tailstock

• Chip conveyor with cart

• Automatic forced lubrication

• Fully enclosed splash guarding

• Tool holders (excl. VDI tooling)

• Fanuc 0i-T control

• 3 step warning light

• Air conditioner for elechical

cabinet

Standard accessories

• Manual tool presetter (Renishaw)

• Auto tool presetter (Renishaw)

• Parts catcher (swing type)

• KITAGAWA hydraulic chuck

• Auto door

• Bar feeder interface

• Large spindle bore (LSB)

-66 mm/4500 rpm for Vturn II-20

-91 mm/2500 rpm for Vturn II-26

• Air blow system

• High pressure coolant

• 12" chuck/3000rpm for Vturn II-26

• Fanuc 21i-T/18i-T control

• Gantry robot system

Optional accessories

Tool Vturn II-16 Vturn II-20 Vturn II-23 Vturn II-26Tool shank for turret disk 20 mm 25 mm 25 mm 25 mmFace+O.D.cutting tool holder 2 2 2 2Face+I.D.cutting tool holder 1 1 1 1Extended O.D.culting tool holder - - - -Boring bar holder32 mm 6 - - -40 mm - 5 5 650 mm - - - 1Boring bar sleeve8 mm 1 - - 110 mm 2 2 2 212 mm 2 2 2 216 mm 2 2 2 220 mm 2 2 2 225 mm 2 2 2 232 mm - 2 2 2Drill socketMT1 Optional 1 1 -MT2 2 1 1 1MT3 1 1 1 1MT4 - - - 1'U' Drill holder32 mm 1 - - -40 mm - 1 1 1'U' Drill socket20 mm 1 - - -25 mm 1 1 1 132mm - 1 1 1

"U" Drill holder

8

V I C T O r ’ S F a n U C 0 i - T C / 2 1 i - T B / 1 8 i - T B C O n T r O L S P e C I F I C a T I O n SStandardITEM / SPECIFICATION DESCRIPTIONControlled Axes:

1. Controlled Axes 2 Axes (X, Z)

2. Simultaneous Controlled AxesPosition/Linear interpolation/Circular interpolation (2/2/2)

3. Least Input Increment 0.001mm / 0.0001inch / 0.001deg.4. Least Input Increment 1/10 0.0001mm / 0.00001inch / 0.0001deg.5. Max, command value ±99999.999mm (±9999.9999in)6. Fine Acceleration & Deceleration Control Std.7. HRV Control Std.8. Inch / Metric Conversion Std. (G20/G21)9. Interlock All Axes / Each Axis / Cutting Block Start10. Machine Lock All Axes / Each Axis11. Emergency Stop Std.12. Over-travel Std.13. Stored Stroke Check 1 Std.14. Mirror Image Each Axis15. Chamfering on/off Std.16. Follow-up Std.17. Unexpected disturbance torque detection function Std. (to be used to tool load monitoring)18. Position switch (with Victor's own PLC) Std. (to be used for security)

Operation:1. Automatic Operation Std.2. MDI Operation MDI B3. DNC Operation Reader / Puncher Interface is Required4. DNC Operation with Memory Card PCMCIA Card Attachment is Required5. Program Number Search Std.6. Sequence Number Search Std.7. Sequence number comparison and stop Std.8. Buffer Register Std.9. Dry Run Std.10. Single Block Std.11. JOG Feed Std.12. Manual Reference Position Return Std.13. Manual Handle Feed 1 Unit / Each Path14. Manual Handle Feed Rate X1, X10, X100

Interpolation:1. Positioning G002. Threading synchronous cutting Std.3. Multiple threading Std.4. Threading retract Std.5. Continuous threading Std. (G76)6. Variable threading Std. (G34)7. Linear Interpolation G018. Circular Interpolation G02, G03 (multi-quadrant is possible)9. Dwell G04

10. Skip Function G3111. Reference Position Return G2812. Reference Position Return Check G2713. 2ND Reference Position Return Std.

Feed:1. Rapid Traverse Rate Std.2. Rapid Traverse Override F0, 25%, 50%, 100%3. Feed Per Minute G94 (mm/min)4. Feed Per Revolution G95 (mm/rev)5. Tangential Speed Constant Control Std.6. Cutting Feed rate Clamp Std.7. Automatic Acceleration / Deceleration Rapid traverse: linear; Cutting feed: exponential8. Rapid traverse bell-shaped acceleration/deceleration Std. (on 21i/18i only)9. Linear accel/deceleration after cutting feed interpolation Std.

10. Feed rate Override 0~150%11. Jog Override 0~100%12. Feed Stop Std.

Program Input:1. EIA / ISO Automatic Recognition Std.2. Label Skip Std.3. Parity Check Std.4. Control In / Out Std.5. Optional Block Skip 16. Max. Programmable Dimension ±8-Digit7. Program Number O4-Digit8. Sequence Number N5-Digit9. Absolute / Incremental Programming G90/G91

10.Decimal Point Programming / Pocket Calculator Type Decimal Point Programming

Std.

11. Input Unit 10 Time Multiply Std.12. Diameter/radius programming Std.13. Plane Selection G17, G18, G1914. Automatic Coordinate System Setting Std.15. Work piece Coordinate System G52, G53, G54~G5916. Direct Drawing Dimension Programming Std.17. G code System A Std.18. Chamfering/corner R Std.19. Programmable Data Input G1020. Sub Program Call 4 folds nested 21. Custom Macro B Std.22. Canned Cycles Std.23. Multiple Repetitive Cycle Std. (G70~G76) 24. Multiple Repetitive Cycle 2 (Pocket profile) Std. (G70~G76 type II)25. Canned Cycle for Drilling Std.26. Program Format FANUC std. format27. Program Stop / Program End M00 / M01 / M02 / M30

Auxiliary Spindle Speed Function:1. Auxiliary Function Lock Std.2. High Speed M / S / T Interface Std.3. Spindle Speed Function Std.4. Constant Surface Speed Control Std.5. Spindle Override 50~120%6. Actual Spindle Speed Output Std.7. 1st Spindle Orientation Std.8. 1 st Spindle Output Switching Function Std.9. M Code Function M3 digit10. S Code Function S5 digit11. T Code Function T2 digit12. Rigid Tapping (Spindle) Std.

Tool Function & Tool Compensation:1. Tool Function T7+1/T6+2digits

2. Tool Offset Pairs ±6-digit 64 pairs

3. Tool Nose Radius Compensation Std. (G40/G41/G42)

4. Tool Geometry/wear Compensation Std.

5. Number of Tool Offsets (in total) 64 sets

6. Automatic Tool Offset Std.

7. Direct Input of Tool Offset Value Measured B Std.

Accuracy Compensation:1. Backlash Compensation Rapid Traverse / Cutting Feed

2. Stored Pitch Error Compensation Std.

Edit Operation:

1. Part Program Storage Length (in total) 640m (0i/21i), 1280m(18i)

2. Number of Registerable programs (in total) 400 (0i/21i/18i).

3. Part Program Editing Std.

4. Program Protect Std.

5. Background Editing Std.

Setting and Display:

1. Status Display Std.

2. Clock Function Std.

3. Current Position Display Std.

4. Program Display Program name 31 characters

5. Parameter Setting and Display Std.

6. Self Diagnosis Function Std.

7. Alarm Display Std.

8. Alarm History Display 25

9. Operation History Display Std.

10. Help Function Std.

11. Run Hour and Parts Count Display Std.

12. Actual Cutting Feedrate Display Std.

13. Display Spindle Speed and T Code At All Screens Std.

14. Dynamic Graphic Display Std

15. Servo Setting Screen Std.

16. Display of Hardware and Software Configuration Std.

17. Multi-Language Display Std.

18. Data Protection Key Std.

19. Erase CRT Screen Display Std.

20. Spindle Setting Screen Std.

21. Color LCD / MDI 8.4" (0i), 10.4" (0i-C*1 / 21i / 18i)

Data Input / Output:1. Reader / Puncher Interface RS-232 interface

2. Memory Card Interface Std.

3. External Work piece number search 9999

C Axis Function (used on CV/BCV/Y models):1. Control Axes Expansion Std.

2. Simultaneously Controlled Axes Expansion Std.

3. Coordinate System Rotation Std.

4. Rotary Axis Designation Std.

5. Rotary Axis Roll-over Std.

6. Axis Control by PMC Std.

7. Control Axis Detach (for Cf axis) Std. (used on Vturn only)

8. Polar Coordinate Interpolation Std. (G112/G113)

9. Cylindrical Interpolation Std. (G107)

10. CS Contouring Control Std. (used on VturnII)

11. Coordinate System Rotation Std.

12. Rigid Tapping (C-axis) with Victor’s own PMC Std.

2 Spindle Function (used on B/BCV/YBCV models):1. Multi Spindle Control Std.2. 2 Spindle Orientation Std.3. 2 Spindle Output Switching Std.4. Synchronous Control Std.5. Simple Spindle Synchronous Control Std.

Options:With hardware included: 0i 21i 18i

1. Conversational programming (Manual guide i)*1 □ Std. Std.2. Conversational programming (Cap i) N.A. □ □3. Date server (with PCB and ATA card) □ □ □4. Embedded Ethernet (10Mbps) N.A. Std. Std.5. Fast Ethernet (100Mbps, available in Data server) □ □ □6. Tool life management □ □ □7. Part Program Storage Length 1280mm (in total) N.A. □ Std.8. Part Program Storage Length 2560mm (in total) N.A. N.A. □9. Program restart □ □ □

10. Optional block skip 2-9 blocks □ □ □11. Polygon turning (by C-axis) with Victor’s own PLC □ □ □12. Manual handle feed 2 (2nd MPG) N.A. □ □13. Reader/Puncher interface 2 (2nd RS232 interface) N.A. □ □14. External data input N.A. □ □15. Profibus □ □ □

Without hardware included:16. Program number O8-digit N.A. N.A. □17. Circular thread cutting (G35) N.A. N.A. □18. Circular interpolation by 9-digit R designation N.A. N.A. □19. Tool offset value 7 digits N.A. N.A. □20. Number of registered program 1000 (in total) N.A. N.A. □21. G code system B/C N.A. □ □22. Type format for FS 15 N.A. □ □23. Play back N.A. □ □24. Three–dimensional coordinate conversion N.A. □ □25. Direct input of offset value measured for 2 spindle lathe N.A. □ □26. AI NANO control (G5.1 Q1) N.A. □ □27. JERK control N.A. □ □

28.Bell-type acceleration/deceleration before look ahead interpolation N.A.

□ □ □

*1. Manual Guide i is available on 0i-C when the monitor is upgraded to 10.4" LCD.

9

M a C H I n e S P e C I F I C a T I O n S

Item \ ModelVT II-16VT II-20

VT II-16 CVVT II-20 CV

VT II-16YCVVT II-20YCV

VT II-23 (B) VT II-23CV (BCV)VT II-26/60 (B)VT II-26/110 (B)

VT II-26/60CV (BCV)VT II-26/110CV (BCV)

VT II-26/60YCVVT II-26/110YCV

VT II-26/110YBCV

Capacity

Swing over bed mm 590 590 610 670 670 670 670 780 780Swing over carriage mm 400 400 480 486 486 486 486 580 580

Between centers mm 540 540 430 610 (490) 610 (490) 610 (490)1100 (980)

610 (490)1080 (980)

465970 970

Max. turning dia. mm 440 330 290 330 (360) 316 (360) 370 (360) 316 (360) 330 330

Std. Turning dia. mm 370360 270 254 250 250 (290) 290 (310) 250 (285) 280 280

Bar capacity mm 4052 (Opt. 66)

4052

4052 52 52 75 (Opt. 91) 75 75 75

Travels

X axis stroke mm 220 + 20 135 + 105 160 + 20 165 + 50 (180 + 15) 143.5 + 122 (180 +15) 185 + 50 (180 + 15) 143.5 + 122 (180 + 15) 195 (165 + 30) 195 (165 + 30)

Z axis stroke mm 510 510 405 610 (490) 610 (490) 610 (490)1100 (980)

610 (490)1100 (980)

475980 980

B axis stroke mm - - - - (425) - (425) - (425)- (915)

- (425)- (915) - 915

Y axis stroke mm - - ±45 - - - - ± 55 ± 55

Spindle

Max. spindle speed rpm60004200

60004200

60004200 4200 4200 3500 3500 3500 3500

Spindle nose (chuck) Inch A2-5 (6")A2-6 (8")

A2-5 (6")A2-6 (8")

A2-5 (6")A2-6 (8") A2-6 (8") A2-6 (8") A2-8 (10") A2-8 (10") A2-8 (10") A2-8 (10")

Spindle bore mm 5262

5262

5262 62 62 86 86 86 86

Spindle indexing deg - 0.001 0.001 - 0.001 - 0.001 0.001 0.001

Bearing inside dia. mm 90100

90100

90100 100 100 130 130 130 130

Sub-spindle(B axis)

Max. spindle speed rpm - - - 4500 (Opt. 6000) 4500 (Opt. 6000) 4500 (Opt. 6000) 4500 (Opt. 6000) - 4500 (Opt. 6000)Spindle nose (chuck) Inch - - - A2-5 (6") A2-5 (6") A2-5 (6") A2-5 (6") - A2-5 (6")Spindle bore mm - - - 52 52 52 52 - 52Spindle indexing deg - - - - 0.001 - 0.001 - 0.001Bearing inside dia. mm - - - 90 90 90 90 - 90

Turret

No. of tools no. 1210 (Opt. 8) 12 12 8 (12) 12 (12) 12 (12) 12 (12) 12 12

No. of live tools no. - 12 12 - 12, Opt. 6 (12) - 12, Opt. 6 (12) 12 12

Tool shank size mm2025 20 20 25 25 25 25 25 25

Max. boring bar dia. mm 32 (VDI-30)40 (VDI-30) VDI-30 VDI-30 40 (VDI-40) VDI-40 50 (VDI-40) VDI-40 VDI-40 VDI-40

Exchange time (T-T) sec 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2Milling speed rpm - 3000 3000 - 3000 - 3000 3000 3000

TailstockQuill dia. mm 75 75 75 85 (-) 85 (-) 85 (-) 85 (-) 85 (-) -Quill taper MT#4 MT#4 MT#4 MT#4 (-) MT#4 (-) MT#5 (-) MT#5 (-) MT#5 (-) -Quill stroke mm 80 80 80 120 (-) 120 (-) 120 (-) 120 (-) 120 (-) -

FeedrateRapid feedrate mm/min X:20000 / Z:2400 X:20000 / Z:2400 X:18000 / Z:20000,

Y:7500X:20000 / Z:24000

(B:12000)X:20000 / Z:24000

(B:12000)X:20000 / Z:24000

(B:12000)X:20000 / Z:24000

(B:12000)X: 18000 / Z: 20000 /

Y: 7500X: 18000 / Z: 20000 /

B: 12000 / Y: 7500Cutting feedrate mm/min X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260

Motor

Spindle motor kW 11/15 a B160Mi - 5.5/7.5a B180Mi - 11/15

a B160Mi - 5.5/7.5a B180Mi - 11/15

11/15 a B180Mi - 11/15 15/18.5 a B200Mi - 15/18.5 a B200Mi - 15/18.5 a B200Mi - 15/18.5

Sub-spindle motor kW - - - a B160Mi - 5.5/7.5 a B160Mi - 5.5/7.5 a B160Mi - 5.5/7.5 a B160Mi - 5.5/7.5 - a B160Mi - 5.5/7.5

Servo motor kW X: 1.6, Z: 3.0 X: 1.6, Z: 3.0 X: 3.0, Z: 4.0, Y: 1.6X: 3.0, Z: 4.0

(B: 3.0)X: 3.0, Z: 4.0

(B: 3.0)X: 3.0, Z: 4.0

(B: 3.0)X: 3.0, Z: 4.0

(B: 3.0) X: 4, Z: 4, Y: 1.6 X: 4, Z: 4, Y: 1.6, B: 3.0

Milling motor kW - 3 3 - 4 - 4 4 4Controller FANUC 0i-T 0i-T 18i-T 0i-T 0i-T (18i-T) 0i-T 0i-T (18i-T) 18i-T 18i-T

Coolant Tank capacity L. 130 130 130 130 130 130160

130160

130160 160

MachineL x W x H mm 2300 x 1685 x 1700 2300 x 1685 x 1700 2500 x 1750 x 2000 2770 x 1780 x1853 2770 x 1780 x 1853 2870 x 1780 x 1853

3490 x 1780 x 1798 2870 x 1780 x 18533490 x 1780 x 1978

2870 x 2073 x 21753490 x 2073 x 2275 3490 x 2073 x 2275

Net weight kg 4200 4300 4900 5550 (5750) 5550 (5750) 5600 (5800)6200 (6400)

5600 (5800)6200 (6400)

56006600 6800

* Machine and controller specifications are subject to change without notice

10

Item \ ModelVT II-16VT II-20

VT II-16 CVVT II-20 CV

VT II-16YCVVT II-20YCV

VT II-23 (B) VT II-23CV (BCV)VT II-26/60 (B)VT II-26/110 (B)

VT II-26/60CV (BCV)VT II-26/110CV (BCV)

VT II-26/60YCVVT II-26/110YCV

VT II-26/110YBCV

Capacity

Swing over bed mm 590 590 610 670 670 670 670 780 780Swing over carriage mm 400 400 480 486 486 486 486 580 580

Between centers mm 540 540 430 610 (490) 610 (490) 610 (490)1100 (980)

610 (490)1080 (980)

465970 970

Max. turning dia. mm 440 330 290 330 (360) 316 (360) 370 (360) 316 (360) 330 330

Std. Turning dia. mm 370360 270 254 250 250 (290) 290 (310) 250 (285) 280 280

Bar capacity mm 4052 (Opt. 66)

4052

4052 52 52 75 (Opt. 91) 75 75 75

Travels

X axis stroke mm 220 + 20 135 + 105 160 + 20 165 + 50 (180 + 15) 143.5 + 122 (180 +15) 185 + 50 (180 + 15) 143.5 + 122 (180 + 15) 195 (165 + 30) 195 (165 + 30)

Z axis stroke mm 510 510 405 610 (490) 610 (490) 610 (490)1100 (980)

610 (490)1100 (980)

475980 980

B axis stroke mm - - - - (425) - (425) - (425)- (915)

- (425)- (915) - 915

Y axis stroke mm - - ±45 - - - - ± 55 ± 55

Spindle

Max. spindle speed rpm60004200

60004200

60004200 4200 4200 3500 3500 3500 3500

Spindle nose (chuck) Inch A2-5 (6")A2-6 (8")

A2-5 (6")A2-6 (8")

A2-5 (6")A2-6 (8") A2-6 (8") A2-6 (8") A2-8 (10") A2-8 (10") A2-8 (10") A2-8 (10")

Spindle bore mm 5262

5262

5262 62 62 86 86 86 86

Spindle indexing deg - 0.001 0.001 - 0.001 - 0.001 0.001 0.001

Bearing inside dia. mm 90100

90100

90100 100 100 130 130 130 130

Sub-spindle(B axis)

Max. spindle speed rpm - - - 4500 (Opt. 6000) 4500 (Opt. 6000) 4500 (Opt. 6000) 4500 (Opt. 6000) - 4500 (Opt. 6000)Spindle nose (chuck) Inch - - - A2-5 (6") A2-5 (6") A2-5 (6") A2-5 (6") - A2-5 (6")Spindle bore mm - - - 52 52 52 52 - 52Spindle indexing deg - - - - 0.001 - 0.001 - 0.001Bearing inside dia. mm - - - 90 90 90 90 - 90

Turret

No. of tools no. 1210 (Opt. 8) 12 12 8 (12) 12 (12) 12 (12) 12 (12) 12 12

No. of live tools no. - 12 12 - 12, Opt. 6 (12) - 12, Opt. 6 (12) 12 12

Tool shank size mm2025 20 20 25 25 25 25 25 25

Max. boring bar dia. mm 32 (VDI-30)40 (VDI-30) VDI-30 VDI-30 40 (VDI-40) VDI-40 50 (VDI-40) VDI-40 VDI-40 VDI-40

Exchange time (T-T) sec 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2Milling speed rpm - 3000 3000 - 3000 - 3000 3000 3000

TailstockQuill dia. mm 75 75 75 85 (-) 85 (-) 85 (-) 85 (-) 85 (-) -Quill taper MT#4 MT#4 MT#4 MT#4 (-) MT#4 (-) MT#5 (-) MT#5 (-) MT#5 (-) -Quill stroke mm 80 80 80 120 (-) 120 (-) 120 (-) 120 (-) 120 (-) -

FeedrateRapid feedrate mm/min X:20000 / Z:2400 X:20000 / Z:2400 X:18000 / Z:20000,

Y:7500X:20000 / Z:24000

(B:12000)X:20000 / Z:24000

(B:12000)X:20000 / Z:24000

(B:12000)X:20000 / Z:24000

(B:12000)X: 18000 / Z: 20000 /

Y: 7500X: 18000 / Z: 20000 /

B: 12000 / Y: 7500Cutting feedrate mm/min X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260 X/Z=0~1260

Motor

Spindle motor kW 11/15 a B160Mi - 5.5/7.5a B180Mi - 11/15

a B160Mi - 5.5/7.5a B180Mi - 11/15

11/15 a B180Mi - 11/15 15/18.5 a B200Mi - 15/18.5 a B200Mi - 15/18.5 a B200Mi - 15/18.5

Sub-spindle motor kW - - - a B160Mi - 5.5/7.5 a B160Mi - 5.5/7.5 a B160Mi - 5.5/7.5 a B160Mi - 5.5/7.5 - a B160Mi - 5.5/7.5

Servo motor kW X: 1.6, Z: 3.0 X: 1.6, Z: 3.0 X: 3.0, Z: 4.0, Y: 1.6X: 3.0, Z: 4.0

(B: 3.0)X: 3.0, Z: 4.0

(B: 3.0)X: 3.0, Z: 4.0

(B: 3.0)X: 3.0, Z: 4.0

(B: 3.0) X: 4, Z: 4, Y: 1.6 X: 4, Z: 4, Y: 1.6, B: 3.0

Milling motor kW - 3 3 - 4 - 4 4 4Controller FANUC 0i-T 0i-T 18i-T 0i-T 0i-T (18i-T) 0i-T 0i-T (18i-T) 18i-T 18i-T

Coolant Tank capacity L. 130 130 130 130 130 130160

130160

130160 160

MachineL x W x H mm 2300 x 1685 x 1700 2300 x 1685 x 1700 2500 x 1750 x 2000 2770 x 1780 x1853 2770 x 1780 x 1853 2870 x 1780 x 1853

3490 x 1780 x 1798 2870 x 1780 x 18533490 x 1780 x 1978

2870 x 2073 x 21753490 x 2073 x 2275 3490 x 2073 x 2275

Net weight kg 4200 4300 4900 5550 (5750) 5550 (5750) 5600 (5800)6200 (6400)

5600 (5800)6200 (6400)

56006600 6800

* Machine and controller specifications are subject to change without notice

11

Vturn II-20

Vturn II-20CV with C axis & VDI turret


Vturn II-16

ø40ø32ø32

ø32

20

30

X-axis stroke

20

ø187

ø40 ø46

ø440

ø370

ø195

35 35

ø130

ø214ø510

240

20

35185

220ø215

440

ø181

ø184

ø32ø46

40

2530

25

ø226

ø225

ø40

ø520

ø218

ø231 ø360

ø440

X-axis stroke

180 40

ø40

40

40

220 20240

ø266

ø255

Z-axis stroke

Z-axis zero point

X-ax

isst

roke

X-ax

isze

ropo

int

8" Power chuck

Quill taper stroke of tailstock Stroke of tailstock

460

510152

50

235

220

240

45

62 35

20

448440

(104)

91 3965

145170 80

157.

5

510

6839.550 460 50

4010

6530

80 440

(104)3755257842310

140

160

170

238

8

1013

510

5

240

42

183

160

133

56 81 29 169.5

Z-axis zero point

Z-axis stroke

X-ax

is s

trokeX-ax

is z

ero

poin

t

6"Power chuck


157.5

20

50

20

ø20

ø294

ø143

ø175

ø380

3065

40

ø189

ø166

ø213

ø445

ø505

ø315

230

135

ø270ø330

49

20.5

240

10

105

X-axis stroke

157.

5

510

6839.550 460 50

4010

6530

80 440

(104)3755257842310

140

160

170

238

8

1013

510

5

240

42

183

160

133

56 81 29 169.5

Z-axis zero point

Z-axis stroke

X-ax

is s

trokeX-ax

is z

ero

poin

t

6"Power chuck


157.5

20

50

20

ø20

ø294

ø143

ø175

ø380

3065

40

ø189

ø166

ø213

ø445

ø505

ø315

230

135

ø270ø330

49

20.5

240

10

105

X-axis stroke

460

510142Z-axis stroke

Z-axis zero point

X-ax

isst

roke

X-ax

isze

ropo

int

6" Power chuck


50

235

220

240

440

56 2981

135160 80

448

45

62 35 (104)

20

12

Vturn II-23BCV with sub-spindle & VDI turret

8" chuck18520

28.875

Ø251.9

Ø256.4

Ø210.6

Ø370

Ø452

Ø200.1

Ø215.2

Ø151.5

Ø596

80

Ø17

2.1

Ø18

7.8 115125

238

423

Ø250Ø31

6

2

610 (1100)

50

(155)

120 520 (1000)

218

Stroke of tailstockQuill taper stroke of tailstock

Z-axis travel

Z-axis zero point

185

370

80 423

240

X-a

xis

trav

el

X-a

xis

zero

poi

nt

127

240

125

115

10763650

226

164

91 3933

34

33

560 (1050)

44

Vturn II-23

3025 ø296 40 ø40

ø296

ø250ø3

30

25

ø520

ø50

40180

X-axis travel

50

215

165

ø286

58

ø32140 40

128

ø210

160 110

ø580

23

27

ø520

ø229

ø40

ø235

ø40ø360

ø310

195X-axis travel

180 15

450

490114Z-axis travel

Z-axis zero point10 42.5 52.55

160

100

110

108.598.5

40 65.5

ø255

ø10 12

100

90

X-axistra

vel

X-axiszero

point

195

180

15

8"Power chuck

36156.53991

394

Sub-spindle travel, zero point425

422

394

29 91

99

8787

6"Power chuck

ø32

10342

ø226ø43

ø306

8

ø611ø234 ø243

ø285

ø360

ø32

195

160 110 180 15

X-axis travel

ø218

12.5

490 108.5Z-axis travel

Z-axis zero point

10

109.5 36 40

40 98.555 75.5 50

ø10 16ø2

20

ø270 100

100

42.55 52.5 50 85 65

20

103

42

195

X-ax

istra

vel

X-ax

isze

ropo

int

90

180

15

394

Sub-spindle travel, zero point

8" Power chuck

9 87

9 87

916" Power chuck29

425

394

32156

4183991

110

Vturn II-23B with sub-spindle & VDI turret


560Z-axis travel

Z-axis zero point

X-ax

istra

vel

X-ax

isze

ropo

int

8" Power chuckQuill taper stroke of tailstock Stroke of tailstock

50

(155)

120

ø69

65.5 91 39

165

215

500

185

560 50

610

750

148

i

42.5

13

Stroke of tailstockQuill taper stroke of tailstock

28.875

ø251.9

ø256.4

ø210.6

ø370

ø452

ø200.1

ø215.2

ø151.5

ø596

80 33

ø172

.1ø1

87.8

ø250ø316

125

30

143185

423

20

268X-axi s t ravel

610 (1100)

560 (1050) 50

(155)

120

34

520 (1000)

218

164

4311310"Power check

Z-axis travel

Z-a

xis

trav

el

Z-axis zero point

Z-a

xis

zero

poi

nt

185

8033

423

127

125

4410763650

226

143

268

370(860) 240

30


Vturn II-26BCV with sub-spindle & VDI turret

Vturn II-26B with sub-spindle & VDI turret

Vturn II-26

ø32ø46

ø212

ø208

ø580

ø50

ø144

ø250

36.5

ø40

28

ø240

210

X-axis travel

40 50

235

185

ø40

ø218

ø205

ø290ø3

70

ø40

Z-axis travel

Z-axis zero point

X-ax

istra

vel

X-ax

isze

ropo

int

10" Power chuck


610 (1100)

560 (1050)

181

7

50

185

50

235

(155)560(1050) 50 42.5

510 (1000)

113

120

4366

70

ø210

160 110

ø580

23

27

ø520

ø229

ø40

ø235

ø40ø360

ø310

195X-axis travel

180 15

Z-axis travel

Z-axis zero point

X-ax

istra

vel

X-ax

isze

ropo

int

10" Power chuck

Sub-spindle travel zero point

6" Power chuck

131.5 490 (980)

10 42.5 52.5 98.5450 (940) 40 65.5108.5

5

195

180

110 100

160

113

174 36 425 (915)

394 (884)

15

394 (884)

43 418(908) 29 91

9

9

87

87

90

ø10

100

ø255

12

ø32

ø226ø43

ø611ø234 ø2

34ø306

8

ø210

ø32

X-axis travel

ø360

ø285

195

16012.5

103

110 180 15

42

Z-axis travel

Z-axis zero point

X-ax

istra

vel

X-ax

isze

ropo

int

10" Power chuck

Sub-spindle travel, zero point

6" Power chuck

10 42.5 52.5

131.5

50

450 (940)

490 (980)

85 655

36 40

98.540

75.5 5055

108.5

ø220

16ø10

110

ø270

29 91418 (908)

425 (915)

9

394 (884) 9

87

87

15

394 (884)

113

174

43

36

20

195

4210

3

100

180

90

100

Ø182

18035135 60 40 145

Ø18464.5

Ø202

48

Ø25

Ø200

Ø440 Ø560

113Ø194

Ø212

60

Ø290

135 85

Ø160~(6" chuck)

160

180

20

4545

18064.5135 0.5

Ø160~(6" chuck)

(X-axis travel)

18064.5135 0.5

(X-axis travel)

Ø210~(8"chuck)

85135 160 20

180(X-axis zero point)

Ø210~(8" chuck)

4545

180

(X-axis travel)

Ø182

351454060135

Ø290

Ø25

Ø212Ø506

60

Ø440

64.548Ø184

Ø200

113Ø154

Ø202

X-a

xis

zero

poi

nt

15

405

313.5

145

X-a

xis

trav

el18

0

85

220

35

385117 (104)

45

200 80143

(6" chuck)

20

143200

65 91

Quill travel

(8" chuck)313.5

405

39

385Tailstock travel

80117

35X

-axi

s ze

ro p

oint

20 145

180

X-a

xis

trav

el

8515

220

135355 (Z-axis zero point)

56.530

405 (Z-axis travel)

1250

35

(104)

45

1250

405 (Z-axis travel)135355 (Z-axis zero point)

56.530 35

298156

(X-axis travel)(X-axis travel)

(X-axis travel)

(X-axis zero point)

Quill travel Tailstock travel

Ø290

Ø254

Ø254

Ø182

18035135 60 40 145

Ø18464.5

Ø202

48

Ø25

Ø200

Ø440 Ø560

113Ø194

Ø212

60

Ø290

135 85

Ø160~(6" chuck)

160

180

20

4545

18064.5135 0.5

Ø160~(6" chuck)

(X-axis travel)

18064.5135 0.5

(X-axis travel)

Ø210~(8"chuck)

85135 160 20

180(X-axis zero point)

Ø210~(8" chuck)

4545

180

(X-axis travel)

Ø182

351454060135

Ø290

Ø25

Ø212Ø506

60

Ø440

64.548Ø184

Ø200

113Ø154

Ø202

X-a

xis

zero

poi

nt

15

405

313.5

145

X-a

xis

trav

el18

0

85

220

35

385117 (104)

45

200 80143

(6" chuck)

20

143200

65 91

Quill travel

(8" chuck)313.5

405

39

385Tailstock travel

80117

35X

-axi

s ze

ro p

oint

20 145

180

X-a

xis

trav

el

8515

220

135355 (Z-axis zero point)

56.530

405 (Z-axis travel)

1250

35

(104)

45

1250

405 (Z-axis travel)135355 (Z-axis zero point)

56.530 35

298156

(X-axis travel)(X-axis travel)

(X-axis travel)

(X-axis zero point)

Quill travel Tailstock travel

Ø290

Ø254

Ø254

14

Vturn II-26Y(B)CV460

510142Z-axis stroke

Z-axis zero point

X-ax

isst

roke

X-ax

isze

ropo

int

6" Power chuck


50

235

220

240

440

56 2981

135160 80

448

45

62 35 (104)

20

10 42.552.5

(108)

5 60 89 42.5950

980 Z axis travel

Z axis zero point608942.5

3023.585 13.5

132 38

ø255

16

ø10100

125

110

100 91

44

195

165

30Xa

xis

trav

el

113174

4336

66

10" chuck

588

915588

Sub-spindle travel, zero point908

30587305

87

29 916" chuck

15

75

Xax

isze

ropo

int

Vturn II-26YBCV

Vturn II-26YCV

Vturn II-20YCV

Vturn II-16YCV

44

91

ø560ø255

ø330

ø280

ø630

72

18.7

180 110 165 30

195(X axis travel)

ø249

ø40ø239ø50

ø245

ø231

ø230

180 100 175 20

5555

45

195

ø254(10" chuck)

(X axis travel)

(X axis zero point) 195

184180

5555

91

45

11

ø254(10" chuck)

(X axis travel)

(X axis zero point)

was is also marketed under the brand names (outside North America) and VTIIGE09EG

091

22

80

3

TE

L: 0

4-2

473

33

26

QO

P

R

(B)

D(C

E)

E (n

ot C

E)

I

J(C

E)

A

CH

G

F

M

L

N

K (n

ot C

E)

unit:mm

M a C H I n e L a Y O U T

A B C D E F G H I J K L M N O P Q R

Vt II-16 2300 930 2230 770 910 956 360 1615 648 750 890 1700 1685 260 2230 572 2350 1700

Vt II-20 2300 930 2230 770 910 956 360 1615 648 750 890 1700 1685 260 2230 572 2350 1700

Vt II-23 2770 930 2450 770 910 1080 319 1699 648 750 890 1853 1780 260 2372 640 2430 1700

Vt II-26/60 2870 930 2450 770 910 1080 319 1699 648 750 890 1853 1780 260 2372 640 2430 1700

Vt II-26/110 3490 930 2980 770 910 1080 319 1699 648 890 890 1978 1780 260 2372 640 2430 1700

Vt II-16Y 2500 958 2418 767 907 990 339 1680 640 750 890 2000 1750 260 2300 576 2350 1700

Vt II-20Y 2500 958 2418 767 907 990 339 1680 648 750 890 2000 1750 260 2300 576 2350 1700

Vt II-26/60Y 2870 930 2450 770 910 1115 284 1899 648 890 890 2175 2073 260 2491 668 2723 1900

Vt II-26/110Y 3490 930 2980 770 910 1115 284 1899 648 890 890 2275 2073 260 2491 668 2723 1900

THE COMPANIESVICTOR-TAICHUNG

UK ☐ Victor Europe Limited TEL : 44-1-706-648485 FAX : 44-1-706-648483

FRANCE ☐ Victor France TEL : 33-1-64772000 FAX : 33-1-64772063

GERMANY ☐ Victor GmbH TEL : 49-2261-478434 FAX : 49-2261-478327

SOUTH AFRICA☐ Victor Fortune (PTY) Ltd TEL : 27-11-3923800 FAX : 27-11-3923899

MALAYSIA☐ Victor Machinery (M) SDN. BHD. TEL : 60-3-56337180 FAX : 60-3-56337191

THAILAND☐ Victor (Thailand) Co. Ltd. TEL : 66-2-9263735 FAX : 66-2-9032373

USA☐ Fortune International Inc. TEL : 1-732-2140700 FAX : 1-732-2140701

CHINA☐ Zhongtai Precision Machinery

(Tianjin) TEL : 86-22-25321592 FAX : 86-22-25321663

☐ JIANRONG PRECISION Machinery (Shanghai) TEL : 86-21-59768018 FAX : 86-21-59768008

TAIWAN http://www.or.com.tw E-mail :[email protected]☐ Victor Taichung Machinery Works Co; Ltd. Headquarters: 266, Sec.3 Taichung Kan Rd. Taichung,Taiwan, R.O.C. TEL : 886-4-23592101 FAX : 886-4-23592943 Overseas Marketing Division: TEL : 886-4-23580701 FAX : 886-4-23584541

profile:

Sales : USD 198.2 mil’s (in 2008)*No. of employees: 998*Exchange rate: 1 USD=32 TWD.

Victor Taichung

R

VictorTaichungR

VictorTaichung

HTL VTL VMC HMC PIMXMT

R VictorTaichung - Gibas brochure VturnII-16_20_23... · • 0.2 second real turret indexing time...

Documents

Transcript of R VictorTaichung - Gibas brochure VturnII-16_20_23... · • 0.2 second real turret indexing time...