Product Data Sheet Catalog 2006 - 2007 Rosemount 305...
Transcript of Product Data Sheet Catalog 2006 - 2007 Rosemount 305...
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007 Rosemount 305 and 306 Manifolds
Rosemount 305 and 306 Integral Manifolds
ROSEMOUNT 305 AND 306 FEATURE...
Unique Coplanar design of the Rosemount
3051 and 3095 families allows flangeless
valve integration
Coplanar, traditional, and inline styles
Compact, lightweight assembly
Factory assembled, seal-tested and
calibrated
Easy in-process calibration
50% fewer possible leak points than
conventional manifold/transmitter assemblies
Direct-mount capability
www.ro
Contents
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
Dimensional Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13
semount.com
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007Rosemount 305 and 306 Manifolds
Rosemount 305R Coplanar Style Integral Manifolds
305R TWO-VALVE
This two-valve manifold is used with Rosemount
3051 gage and absolute pressure transmitters. The
first valve provides instrument isolation. The second
valve allows venting, draining, or calibration through
the test port.
305RC2
305RT2
305RM2
305RC7
305R THREE-VALVE
This three-valve manifold is used with Rosemount
3095 and 3051 differential pressure transmitters. It
provides two blocking valves and one equalizing
valve. Two drain/vent valves are also installed at the
test ports.
305RC3
305RT3
305RM3
305RC8
ROSEMOUNT 305R FIVE-VALVE
This five-valve manifold is used with 3095 and 3051
differential pressure transmitters. It provides two
blocking valves, two test/vent valves, and one
equalizing valve. The two vent valves allow for 100%
capture of vented or drained process, and simplified
in-process calibration capability. We also offer a
five-valve integral manifold with a metering pattern
for Natural Gas installations.
305RC5
305RC6
305RC9
305RM5
NOTE
Standard two-valve and standard 5-valve manifold
Test/Vents receive plastic caps to protect threaded
connections.
NOTE
Five-valve Natural Gas Test (Plugged) connections
receive 1/4-in. NPT plug.
Coplanar Transmitter
Test/Vent
Isolate
Process
Drain/
Vent
Valve
Drain/
Vent
ValveEqualize
Process
IsolateIsolate
Coplanar Transmitter
Coplanar Transmitter
Test \
Vent PortTest /
Vent PortEqualize
Process
IsolateIsolate
FIVE-VALVE NATURAL GASCoplanar Transmitter
Isolate Isolate
Equalize Equalize
Process Test/Vent Process
Test
(Plugged)
Test
(Plugged)
2
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007 Rosemount 305 and 306 Manifolds
306RT TWO-VALVE MANIFOLDS
This two-valve pressure manifold is used with 3051
and 2088 gage and absolute pressure transmitters.
The first valve provides instrument isolation. The
second valve allows venting, draining, or calibration
through the test port. Available in 1/214 NPT male or
female process connections.
306RT2
306RT BLOCK-AND-BLEED MANIFOLDS
This pressure manifold is used with 3051 and 2088
gage and absolute pressure transmitters. It provides
a single block valve for instrument isolation. There is
also a plug for drain/vent capabilities. Available in 1/214 NPT male process connection.
306RT1
Test/Vent
Pressure Transmitter
Process
Isolate Isolate
Bleed Screw
Pressure Transmitter
3
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007Rosemount 305 and 306 Manifolds
Specifications
FIGURE 1. 305R integral Manifolds - Pressure vs. Temperature
5000(345)
4000(276)
1000(69)
0(-18)
100(38)
300(149)
400(204)
500(260)
600(316)
700(371)
800(427)
1000(538)
Temperature F (C)
Pre
ss
ure
ps
ig (
ba
r)
0
200(93)
PTFE Packed, Integral SeatGraphite Packed, Integral SealGraphite Packed, (ASME B31.1), Integral Seat
900(482)
3000(207)
2000(138)
6000(414)
6092(420)
TABLE 1. 305R Integral manifolds - pressure and temperature ratings(1)
Packing Seat Pressure and Temperature Ratings
PTFE Integral 6092 psi @ 200F (420 bar @ 93C)
4000 psi @ 400F (276 bar @ 204C)
Graphite Integral 6092 psi @ 200F (420 bar @ 93C)
1500 psi @ 750F (103 bar @ 399C)
Graphite (ASME B31.1) Integral 6092 psi @ 100F (420 bar @ 38C)
2915 psi @ 1000F (201 bar @ 538C)
(1) Except option HK: PTFE, Integral seat: 2324 psi @ 200F (160 bar @ 93C), 1680 psi @ 400F (116 bar @ 204C)Graphite, Integral seat: 2324 psi @ 200F (160 bar @ 93C), 1125 psi @ 750F (78 bar @ 399C)
4
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007 Rosemount 305 and 306 Manifolds
FIGURE 2. 306R integral Manifolds - Pressure vs. Temperature
10000(689)
8000(552)
6000(414)
4000(276)
2000(138)
0(-18)
100(38)
300(149)
400(204)
500(260)
600(316)
700(371)
800(427)
1000(538)
Temperature F (C)
Pre
ss
ure
ps
ig (
ba
r)
0200(93)
900(482)
PTFE Packed, Integral SeatGraphite Packed, Integral SealGraphite Packed, (ASME B31.1), Integral Seat
TABLE 2. 306R Integral manifolds - pressure and temperature ratings
Packing Seat Pressure and Temperature Ratings
PTFE Integral 10000 psi @ 85F (689 bar @ 29C)
4000 psi @ 400F (276 bar @ 204C)
Graphite Integral 6000 psi @ 200F (414 bar @ 93C)
1500 psi @ 750F (103 bar @ 399C)
Graphite (ASME B31.1) Integral 6000 psi @ 100F (414 bar @ 38C)
2915 psi @ 1000F (201 bar @ 538C)
TABLE 3. Process Wetted Materials of Construction - Typical(1)
Component 316SST Hastelloy C Monel 316 SST with SG option
Body(2) 316 SST Hastelloy C-276 Monel 400 316 SST
Ball / Tip 316 SST /316Ti SST Hastelloy C-276 Monel 400 / K500 Hastelloy C-276
Stem 316 SST Hastelloy C-276 Monel 400 / R-405 Hastelloy C-276
Packing PTFE / Graphite PTFE / Graphite PTFE / Graphite PTFE / Graphite
Bonnet 316 SST Hastelloy C-276 Monel 400 / R-405 316 SST
Pipe Plug 316 SST Hastelloy C-276 Monel 400 / R-405 316 SST
Bleed Screw 316 SST / 316Ti SST Hastelloy C-276 Monel 400 / R-405 / K500 Hastelloy C-276
Drain / Vent Valve 316 SST Hastelloy C-276 Monel 400 Hastelloy C-276
(1) Non-wetted parts are 300 series SST.
(2) Body may be supplied as appropriate cast equivalent.
5
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007Rosemount 305 and 306 Manifolds
Shipping Weights
Test Connections1/4-18 NPT
Adapters
DF option, CF-8M (Cast version of 316 SST, material
per ASTM-A743)
Bolts for Manifolds
Standard material is plated carbon steel per ASTM A449, Type 1
Alternative bolt materials offered through Option Codes
L4 Austenitic 316 Stainless Steel Bolts
L5 ASTM-A-193, Grade B7M Bolts
L8 ASTM-A-193, Class 2, Grade B8M Bolts
Bonnet
Stem
Packing
Ball / Tip
Body
ISOLATION VALVE
Note: Typical Valve
TABLE 4. 305 Manifold Weights Without Options, lb (kg)
Model
Approximate
Manifold
Weight
Manifold
with
3051C
Manifold
3051S_C (1)
(1) 3051S Module only; see Rosemount product data sheet 00813-0100-4801 for additional information.
Manifold
with 3095
0305_C2 4.5 (2,0) 9.4 (4,3) 7.6 (3,4) 9.9 (4,5)
0305_C3 4.7 (2,1) 9.6 (4,4) 7.8 (3,5) 10.1 (4,6)
0305_C5 6.5 (3,0) 11.4 (5,17) 9.6 (4,4) 11.9 (5,4)
0305_C6 6.4 (2,9) 11.3 (5,1) 9.5 (4,3) 11.8 (5,35)
0305_C7 4.7 (2,1) 9.6 (4,4) 7.8 (3,5) 10.1 (4,6)
0305_C8 5.0 (2,3) 9.9 (4,5) 8.1 (3,7) 10.4 (4,8)
0305_C9 6.3(2,85) 11.2 (5,1) 9.4 (4,25) 11.7 (5,3)
0305_T2 6.0 (2,7) 10.9 (4,9) 9.1 (4,1)
0305_T3 6.0 (2,7) 10.9 (4,9) 9.1 (4,1)
0305_T7 6.2 (2,8) 11.1 (5,0) 9.3 (4,2)
0305_T8 6.2 (2,8) 11.1 (5,0) 9.3 (4,2)
TABLE 5. 306 Manifold Weights Without Options, lb (kg)
Model
Approximately
Manifold
Weight
Manifold
with 3051T
Manifold
3051S_T(1)
(1) 3051S Module only; see Rosemount product data sheet 00813-0100-4801 for additional information.
Manifold
with 2088
0306_T1 1.1 (0,5) 4.1 (1,9) 2.5 (1,1) 3.1 (1,4)
0306_T2 2.5 (1,1) 5.5 (2,5) 3.9 (1,7) 4.5 (2,0)
0306_T3 2.5 (1,1) 5.5 (2,5) 3.9 (1,7) 4.5 (2,0)
6
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007 Rosemount 305 and 306 Manifolds
Dimensional Drawings
Rosemount 305R Two-Valve Coplanar Style Manifold
Dimensions are in inches (millimeters)
Rosemount 305R Three-Valve Coplanar Style Manifolds
Dimensions are in inches (millimeters)
3051-3031E06Q
5.21 (132)
4.20 (107)
9.00
(229)
7.2 (183)
Max Open
1/2-14 NPT on Manifold for Process Connection1/4-18 NPT for test/vent connection.
4.55 (116)
7.70
(196)
4.30 (108)
Max Open
3051-3031E06Q
5.21 (132)
4.20 (107)
9.00
(229)
10.60 (270)
Max Open
1/2-14 NPT on Manifold for Process Connections, 2.125 inch center-to-center
4.55 (116)
7.70
(196)
5.50 (140)
Max Open
Drain/Vent
Valve
7
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007Rosemount 305 and 306 Manifolds
Rosemount 305R Five-Valve Coplanar Style Manifold
Dimensions are in inches (millimeters)
3051-3031E06Z
5.21 (132)
4.20 (107)
9.00
(229)
11.50 (292)
Max Open
1/2-14 NPT on Manifold for Process Connections, 2.125 inch center-to-center1/4-18 NPT for test/vent connection.
4.55 (116)
7.70
(196)
5.50 (140)
Max Open
Rosemount 305RT Two-Valve Traditional Style Manifold
Dimensions are in inches (millimeters)
5.21 (132)
4.20 (107)
3.75 (95)
Max Open
6.40 (163) Max Open
1/2-14 NPT on optional
Process Adapter*
4.55 (116)
7.70
(196)
3.42 (87)2.125
(54)
1/4-18 NPT on traditional
manifold for process
connection without the
use of a process adapter
1.63 (41)
1.10 (28)
3051-3031F30A
8
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007 Rosemount 305 and 306 Manifolds
Rosemount 305RT Three-Valve Traditional Style Manifold
Dimensions are in inches (millimeters)
Rosemount 305RM Two-Valve Traditional Style Manifold
Dimensions are in inches (millimeters)
5.21 (132)
4.20 (107)
3.75 (95)
Max Open
8.90 (226) Max Open
1/2-14 NPT on optional
Process Adapter*
4.55 (116)
7.70
(196)
3.5 (87)2.125
(54)
1/4-18 NPT on traditional
manifold for process
connections without the
use of process adapters
1.63 (41)
1.05 (27)
1.10 (28) 6.20 (158) Max Open2.70 (69)
Max
* Adapters can be rotated to give adapter connection
centers of 2.0 (51), 2.125 (54), or 2.25 (57).
Drain/Vent Valve
2.70 (69)
Max
Open
3051-3031G30B
5.21 (132)
4.20 (107)
3.75 (95)
Max Open
1/2-14 NPT on optional
Process Adapter*
4.55 (116)
7.70
(196)
3.42 (87)
2.125
(54)
1/4-18 NPT on traditional
manifold for process
connection without the
use of a process adapter
1.63 (41)
1.10 (28) 6.5 (165) Max Open
1/4-18 NPT Vent
Connection
3051-3031RM2
9
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007Rosemount 305 and 306 Manifolds
Rosemount 305RM Three-Valve Traditional Style Manifold
Dimensions are in inches (millimeters)
Rosemount 305RM Five-Valve Traditional Style Manifold
Dimensions are in inches (millimeters)
30
51
-305
-303
1F
30
B;
5.21 (132)
4.20 (107)
3.75 (95)
Max Open
1/2-14 NPT on optional
Process Adapter*
0.75 (19) Clearance
for Cover Removal
4.55 (116)
7.70
(196)
3.5 (87)
2.5
(63)
Max
Open
1/4-18 NPT on traditional
manifold for process
connections without the
use of process adapters
1.10 (28)
9.0 (229) Max Open
Drain/Vent
Valve
1.63 (41)
2.125
(54)
6.5 (165) Max Open
1.05 (27)
* Adapters can be rotated to give adapter connection
centers of 2.0 (51), 2.125 (54), or 2.25 (57).
5.21 (132)
4.20 (107)
4.2 (107)
Max Open
1/2-14 NPT on optional
Process Adapter*
4.55 (116)
7.70
(196)
4.1 (104)
2.5
(63)
Max
Open
1/4-18 NPT on traditional
manifold for process
connections without the
use of process adapters
1.10 (28)
9.0 (229) Max Open
1.63 (41)
2.125
(54)6.5 (165) Max Open
2.6
(66)
* Adapters can be rotated to give adapter connection
centers of 2.0 (51), 2.125 (54), or 2.25 (57).
Max Open
30
51
-30
5-3
031
F3
0C
10
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007 Rosemount 305 and 306 Manifolds
11
Rosemount 306R Pressure Style Manifold (3051T Shown)
Dimensions are in inches (millimeters)
Installations for Rosemount 3051T and 3051S_T Transmitters for 2-in. Pipe Mounting
Dimensions are in inches (millimeters)
4.20 (107) 4.55 (116)
8.00
(203)
1/4-18 NPT on traditional
vent connection
(pipe plug shown)
4.10 (105)4.85
(123)
1/2-14 NPT Female NPT
Process Connection (code BA)
305
1-3
05
-303
D06
BBleed Screw
3.63
(92)
BLOCK AND BLEED STYLE TWO-VALVE STYLE
NOTE: Dimensions are in inches (millimeters).
3.13 (79)
ROSEMOUNT 3051T ROSEMOUNT 3051S_T
6.25 (159) 3.13 (79)6.25 (159)
305
1-3
05
-305
1D
04
B, 3
031
D06
F
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007Rosemount 305 and 306 Manifolds
Coplanar Manifold with Optional Bracket for 2-in. Pipe Mounting
Dimensions are in inches (millimeters)
Traditional Manifold with Optional Brackets for 2-in. Pipe Mounting
Dimensions are in inches (millimeters)
OPTION CODE B4
4.9
(125)
3.54
(90)6.25 (159)
2-inch U-Bolt for
Pipe Mounting
30
51
-30
5-3
031
E0
4C
; F
04B
; 3
05
1-3
031
J0
4A
7.68
(195)
B1/B7/BA MOUNTING BRACKET
B3/B9/BC MOUNTING BRACKET
8.18 (208) 3.56
(90)
1.1 (28)
3.42 (86.9)3.42 (87)
2.62 (66)
0.93 (24)3.56
(90)4.85
(123)
13.03
(331)
1.1
(28)
3.42
(87)
5.32
(135)
7.7
(196)
1.94
(49.2)
12
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007 Rosemount 305 and 306 Manifolds
Ordering Information TABLE 6. Rosemount 305R Integral Manifolds
Model Product Description
0305 Integral Manifold
Code Manufacturer
R Rosemount Inc.
Code Manifold Style
C Coplanar
T Traditional
M Traditional (Rosemount 3095-compatible; DIN-compliant flange)
Code Manifold Type
2 2-valve
3 3-valve
5(1) 5-valve
6(2) 5-valve for natural gas/metering pattern
7(2)(3) 2-valve (per ASME B31.1[ANSI] power and piping code)
8(2)(3) 3-valve (per ASME B31.1[ANSI] power and piping code)
9(2)(3) 5-valve (per ASME B31.1[ANSI] power and piping code)
Materials of Construction
Code Body Bonnet Stem and Tip / Ball Drain/Vent
2 316 SST 316 SST 316 SST 316 SST
3(4)(5) Hastelloy C Hastelloy C Hastelloy C Hastelloy C
4(4) Monel Monel Monel Monel
Code Process Connection
A 18 NPT (Traditional manifold styles T and M)
B 1/214 NPT (Coplanar manifold style only)
Code Packing Material
1 Teflon
2(6) Graphite-based
Code Valve Seat
1 Integral
5 Soft delrin (only available with natural gas/ metering pattern)
Continued on Next Page
13
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007Rosemount 305 and 306 Manifolds
Code 305R Options
P2 Cleaning for special services (Not available with graphite-based packing)
SG(5)(7) 316 SST NACE option (316 SST body and bonnet; Hastelloy C drain/vent, stem and tip/ball) for H2S Service
L4(8) Austenitic 316 SST bolts
L5 ASTM-A-193-B7M bolts
L8 ASTM-A-193, Class 2, Grade B8M bolts
Coplanar Options
B4 SST bracket for 2-in. pipe mount with series 300 SST bolts
Traditional Options
B1 Bracket for 2-in. pipe mounting, CS bolts
B3(9) Flat bracket for 2-in. pipe mounting, CS bolts
B7 B1 bracket with series 300 SST bolts
B9(9) B3 bracket with series 300 SST bolts
BA SST B1 bracket with series 300 SST bolts
BC(9) SST B3 bracket with series 300 SST bolts
BD SST Bracket with Series 300 SST Bolts for 305RM5 Manifolds
DF 1/214 NPT flange adapters, Material of construction; match body material and packing material
(Not available with graphite-based packing or HK, HL options)
HK(10) 10mm (M10) process flange bolting connection
HL(10) 12mm (M12) process flange bolting connection
Typical Coplanar Integral Manifold Model Number: 305RC32B11B4
Typical Transmitter Model Number: 3051CD2A02A1AS5
(1) Not available with traditional manifold style T.
(2) Only available with Coplanar manifold style
(3) Only available with 316SST materials of construction and graphite-based packing.
(4) Not available with traditional manifold Style M.
(5) Materials of Construction comply with recommendations per NACE MR 0175/ISO 15156 for sour oil field production environments. Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(6) Includes graphite tape on drain/vent valves and plugs.
(7) Only available with Materials of Construction Code 2: 316 SST body and bonnets; Hastelloy C stems, tip/balls, and drain/vents.
(8) Not available with manifold codes 7, 8, and 9.
(9) Not compatible with the Rosemount 3095 transmitter.
(10) Only available with traditional manifold style M.
TABLE 6. Rosemount 305R Integral Manifolds
14
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007 Rosemount 305 and 306 Manifolds
TABLE 7. Rosemount 306RT Integral Manifolds
Model Product Description
0306 Pressure Manifold
Code Manufacturer
R Rosemount Inc.
Code Manifold Style
T Threaded
Code Manifold Type
1 Block-and-bleed
2 2-valve
3(1) 2-valve (per ASME B31.1 [ANSI] power and piping code)
Materials of Construction
Code Body Bonnet Stem and Tip / Ball Drain/Vent Plug
2 316 SST 316 SST 316 SST 316 SST
3(2)(3) Hastelloy C Hastelloy C Hastelloy C Hastelloy C
Code Process Connection
AA 1/214 male NPT
BA(2) 1/214 female NPT
Code Packing Material
1 Teflon
2(4) Graphite-based
Code Valve Seat
1 Integral
Code 306RT Options
P2 Cleaning for special services (Not available with graphite-based packing)
SG(3)(5) 316 SST NACE option (316 SST body and bonnet; Hastelloy C stem and tip/ball). For H2S Service
Typical Integral Manifold Model Number: 3 0 6 R T 2 2 B A 1 1
Typical Transmitter Model Number: 3051TG3A2B21AS5B4
(1) Only available with 316SST materials of construction and graphite-based packing.
(2) Not available with block-and-bleed manifold type
(3) Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(4) Includes graphite tape on plugs.
(5) Only available with material of construction code 2.
15
-
Product Data Sheet00813-0100-4733, Rev KA
Catalog 2006 - 2007Rosemount 305 and 306 Manifolds
OPTIONS
Module Guard
A sensor module guard is available to protect the
transmitter process isolating diaphragms. This guard
should be used whenever the transmitter is removed
from the integral manifold to avoid damage to the
isolating diaphragms.
Part number: 00305-1000-0001 (5/pack)
P2 Cleaning for Special Services
This option minimizes process contaminants by
cleaning wetted surfaces with a suitable detergent.
SG Sour Gas
Materials of Construction comply with
recommendations per NACE MR 0175/ISO 15156 for
sour oil field production environments. Environmental
limits apply to certain materials. Consult latest
standard for details. Selected materials also conform
to NACE MR0103 for sour refining environments.
ASME B31.1 (ANSI)
The 305 and 306 Manifolds are available in
configurations that meet the requirements of ASME
B31.1(ANSI) Power and Piping Code. This code
specifies design criteria for most air, gas, steam,
water, and oil systems used in electric generating
systems, central and district heating systems,
industrial power plants and geothermal plants. ASME
B31.1(ANSI) includes requirements for manifolds,
valves, and piping. Transmitters and other measuring
devices do not fall within the scope of this code.
Marking
Manifolds are tagged with a part number, schematic
drawing, temperature and pressure limits.
Other Publications
For additional information, go to
www.rosemount.com.
3051
-303
1C07
F
Emerson Process Management
2006 Rosemount Inc. All rights reserved.
00813-0100-4733w
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.Coplanar is a trademark of Rosemount Inc.Monel is a registered trademark of International Nickel Co.Hastelloy is a registered trademark of Haynes InternationalTeflon is a registered trademark of E.I. du Pont de Nemours & Co.
Emerson Process Management Heath PlaceBognor RegisWest Sussex PO22 9SHEnglandT 44 (0) 1243 863121F 44 (0) 1243 867554
Emerson Process Management Asia Pacific Private Limited1 Pandan CrescentSingapore 128461T (65) 6777 8211F (65) 6777 [email protected]
Rosemount Inc.8200 Market BoulevardChanhassen, MN 55317 USAT (U.S.) 1 800 999 9307T (International) (952) 906 8888F (952) 949 7001
www.rosemount.com
Rosemount 305 and 306 Integral ManifoldsContentsRosemount 305R Coplanar Style Integral Manifolds305R Two-ValveCoplanar Transmitter305R Three-ValveRosemount 305R Five-Valve
Coplanar TransmitterNote
Five-Valve Natural GasNote306RT Two-Valve Manifolds306RT Block-and-Bleed Manifolds
SpecificationsFIGURE 1. 305R integral Manifolds - Pressure vs. TemperatureTABLE 1. 305R Integral manifolds - pressure and temperature ratingsFIGURE 2. 306R integral Manifolds - Pressure vs. TemperatureTABLE 2. 306R Integral manifolds - pressure and temperature ratingsTABLE 3. Process Wetted Materials of Construction - TypicalShipping WeightsTABLE 4. 305 Manifold Weights Without Options, lb (kg)TABLE 5. 306 Manifold Weights Without Options, lb (kg)
Test ConnectionsAdaptersBolts for Manifolds
Dimensional DrawingsOrdering InformationTABLE 6. Rosemount 305R Integral ManifoldsTABLE 7. Rosemount 306RT Integral ManifoldsOptionsModule GuardP2 Cleaning for Special ServicesSG Sour GasASME B31.1 (ANSI)MarkingOther Publications