Product Catalogue - Frank Ratcliffe Roofing Centre · HD270 6.94m 12.71m 27 50.40kg HD - Two...

TRADE LADDERS / STEP LADDERS

DOMESTIC LADDERS / STEP LADDERS

GLASS FIBRE PRODUCTS

LOFT LADDERS

MOBILE & INDUSTRIAL TOWER SYSTEMS

INDUSTRIAL LADDERS / STEP LADDERS

‘C’ SECTION LADDERS / SURVEYORS LADDERS

ROOF LADDERS & EXTENSIONS

WAREHOUSE STEPS

SPECIALS

Product Catalogue

www.lyteladders.co.uk

Order Now! Call: 01639 8468002 3www.lyteladders.co.uk

Product Index

Lyte Ladders & Towers is one of the leading manufacturers ofaluminium and glass-fibre ladders/stepladders and towers in the UK.Established in South Wales in 1947, the comprehensive portfolio ofaccess equipment is renowned for its quality of design andmanufacture.

● Products are manufactured at Lyte’s 200,000sq ft site

● Probably the largest portfolio of Trade and Industrial products inthe UK

● Certified to the relevant standards(BS2037 Class 1 & 3, BSEN131 and ANSI 14.5)

● Lyte’s products are supplied to leading organisations throughout theUK including BT, Sky, HSS Hire and Screwfix.

● Highly trained and friendly in-house telesales and arearepresentatives

● 60,000 sq ft Distribution Centre and increased number of distributionvehicles

● Some of our more specialist products have been supplied to anumber of Britain’s Fire Brigades as well as the Green Goddessesduring their call to action.

● Lyte have achieved ISO9001:200 & OHSAS 18001

● All Hailo products are distributed through Lyte Ladders & Towersthroughout the UK and Ireland

Which product should I buyand is it strong enough?British and European Standards apply to most ladders &stepladders, so make sure you choose the right kind ofladder for the job:

Class 3 (Domestic) BS2037This Standard applies to products being used in and around thehome; these products are designed for infrequent use● Duty Rating 95Kg = Max permissible load 125Kg

Previous Class 2 (Trade) BSEN131This is the European Standard, which covers the products beingused in a trade environment; these products are designed forregular light trade work.● Max permissible load 150Kg

Class 1 (Industrial) BS2037This Standard applies to products being used in an industrialenvironment; these are high quality products, designed for heavyand regular loading.● Duty Rating 130Kg = Max permissible load 175Kg

Certified to BS 7553: 1992 Class G (General use) Loft ladder Classification● Duty Rating 100Kg

Lyte Industries (Wales) Ltd.Wind Road, Ystradgynlais, Swansea, Powys, UK SA9 1AFTel: 01639 846800 Fax: 01639 841541 email: [email protected]

Company History

Index


Page

● Domestic Extension Ladders 5

● Trade Extension Ladders 6

● General Duty Extension Ladders 7

● Heavy Duty Extension Ladders 8

● Triple Ext. Push-up Ladder 9

● C Section Ladder 10

● Glass Fibre Push-up Ladder 11

● Trade Roof Ladders 12

● Industrial Roof Ladders 13

● Hailo Gangway Step Ladders 14

● Hailo Household ProfiStep® 15

● Lightweight StepLadders 16

● Trade Step Ladders 17 - 18

● Glassfibre Trade Step Ladders 19

● Widestep Step Ladders 20

● Industrial Step Ladders 21 - 22

● Glassfibre Industrial Step Ladders 23

● Ladda Steps 24

● Multi Purpose Ladders 25

● Telescopic Ladder System 26

● Combination Ladders 27

● Professional Combi Ladder 28 - 29

● Multi-purpose Platforms 30

● Specialist Ladders 31 - 33

● Loft Ladders 34

● Accessories 35 - 36

● Trestles & Staging Boards 37

● Podium Steps 38

● Low Level Work Platform 39

● Roof Buddy 40 - 41

● LIFT System 42 - 43

● Helix Industrial Tower System 44 - 46

● HiLyte Industrial Tower System 47 - 49

● PASMA Tower Training Course 50

● Ladder Association Training Course 51

● Using Ladders - Top Tips 52

● Conditions of Sale 53

● Credit Account Application 55

Doubles Rungs Closed Open WeightCode Height HeightBD225 7 2.2m 3.7m 6.50kgBD230 9 2.7m 4.7m 8.00kgBD235 11 3.3m 5.9m 11.00kgBD240 13 3.8m 6.9m 14.50kgBD245 15 4.4m 8.1m 16.00kg

Triples Rungs Closed Open WeightCode Height HeightBD325 7 2.2m 5.2m 8.50kgBD330 9 2.7m 6.7m 14.50kgBD335 11 3.3m 8.5m 19.00kg

BD - DIY Quality 2 and 3 SectionDomestic Ladders● Large “D” shaped rung

● Rigid wide, box section stiles

● Red, non- slip feet riveted in place

● Certified to BS 2037 Class 3

● Comprehensive variety of sizes

● Extruded hooks and guides provideextra safety

Domestic Ladders


GD - General Duty Extension Ladders

● All three types are certified to BS2037Class 1 1994

● Available in single section or double and triple push-ups

● Now fitted with the new comfortable D-shaped rung and solid moulded rubber feetat both ends

● A cost effective alternative to the heavy duty range, these ladders are easy to handle yet incredibly rigid in relation to weight

Code Closed Ext. Rungs WeightHeight Height

GS120 1.93m - 7 4.10kgGS125 2.43m - 9 5.00kgGS130 2.93m - 11 6.40kgGS135 3.43m - 13 7.70kgGS140 3.93m - 15 8.60kgGS145 4.43m - 17 9.50kgGS150 4.93m - 19 10.40kgGS160 5.93m - 23 12.30kg

GS - Single SectionGeneral Duty Ladders


GD225 2.43m 4.20m 9 10.90kgGD230 2.93m 5.20m 11 12.70kgGD235 3.43m 6.20m 13 15.00kgGD240 3.93m 7.20m 15 23.10kgGD245 4.43m 8.20m 17 25.90kgGD250 4.93m 8.95m 19 28.60kg

GD - Two Section Push-upGeneral Duty Extension Ladders


GT320 1.93m 4.46m 7 14.50kgGT325 2.43m 5.96m 9 16.80kgGT330 2.93m 7.46m 11 27.70kgGT335 3.43m 8.96m 13 33.60kgGT340 3.93m 10.46m 15 42.20kg

GT - Three Section Push-upGeneral Duty Extension Ladders

NEWcomfortable

D-shaped rung

General Duty Ladders

Two Section Push-Up

Three Section Push-Up

Trade LaddersELT - Trade Ladders● Certified to BSEN131

● Ideal for all types of trade work

● Large comfortable ‘D’ Shaped rungs

● Rigid extruded box section stiles for added strength

● Secure non-slip grip with all round PVC

moulded feet

● Comprehensive range of sizes available

Code Closed Ext. Weight RungsHeight Height

ELT225 2.42m 3.82m 9.00kg 8ELT230 2.92m 4.88m 10.50kg 10ELT235 3.42m 5.94m 14.00kg 12ELT240 4.04m 7.03m 16.00kg 14ELT245 4.42m 7.81m 20.50kg 15ELT250 4.92m 8.83m 23.50kg 17ELT255 5.42m 9.90m 29.00kg 19

Two Section Push-up

Code Closed Ext. Weight RungsHeight Height

ELT325 2.42m 5.22m 16.50kg 8ELT330 2.92m 6.85m 18.50kg 10ELT335 3.42m 8.46m 25.50kg 12ELT340 4.04m 10.22m 28.50kg 14

Three Section Push-up



HD235 3.37m 5.95m 13 20.00kgHD240 3.94m 7.21m 15 23.10kgHD245 4.44m 8.21m 17 26.80kgHD250 4.94m 8.96m 19 29.90kgHD255 5.44m 9.96m 21 37.20kgHD260 5.94m 10.71m 23 45.40kg

HD - Two Section Heavy Duty Rope-operated Extension LaddersKitemarked to BS2037 (Class1)


HT340 3.94m 10.47m 15 43.50kgHT345 4.44m 11.97m 17 52.60kgHT350 4.94m 12.97m 19 58.50kg

HT - Three Section Heavy Duty Rope-operated Extension LaddersKitemarked to BS2037 (Class1)


HD270 6.94m 12.71m 27 50.40kg

HD - Two Section Heavy Duty Rope-operated Extension Ladders


HT355 5.44m 13.97m 21 64.90kgHT360 5.94m 15.47m 23 71.20kg

HT - Three Section Heavy Duty Rope-operated Extension Ladders

HD - Heavy Duty IndustrialRope-Operated Ladder● Certified to BS2037 Class 1 1994

● These classic heavy-duty ladders are still probably the strongest commercial ladders available, and are ideal for all professional tradesmen

● Wall-running wheels, interlocking stiles and rope operation makes extensionsmooth and provides extra strength

● Now fitted with the new comfortableD-shaped rung and solid moulded rubberfeet at both ends

● Automatic gravity latch ensures fail-safe locking

Heavy Duty Ladders

Code Closed Open Weight RungsHeight Height

L5BEQ 2.5m 5.96m 18.50kg 8

Triple Extension Push-up Ladder

L5BEQ Aluminium Ladder● Certified to BS2037 Class1

● Unique aluminium ‘butterfly’ rung providesexcellent balance and support at the top ofthe ladder

● Specifically designed for British Telecomlinesmen, this ladder is ideal for working ontelegraph poles and street lamps

● Fitted with a double safety catch and alashing rope to ensure safety when in use

● Nylon rollers fitted to the bases and middlesections enable the operator to erect theladder with the minimum of effort.

Continuousinvestment

in new productdevelopmentensures we

meet alldemands

of Health andSafety

requirements

Triple Ext. Push-up Ladder

• This product now comes with D-shapedrung in both the double and tripleextension ladders making it even morecomfortable for everyday use.

D-shaped rungcomfortable

NEW


‘C’ Section Ladder● Heavy duty ‘C’ shaped stiles with non-slip

serrated round rungs

● Fully interlocking stiles for safety at extended heights

● Sections can be separated to use independently

● Can be converted to rope-operation

● Can be fitted with wall running wheels


CS125 2.38m - 6.00kg 9CS130 2.88m - 7.30kg 11CS135 3.38m - 8.60kg 13CS140 3.88m - 9.50kg 15CS145 4.38m - 11.30kg 17CS150 4.88m - 12.30kg 19CS155 5.38m - 13.60kg 21CS160 5.88m - 15.00kg 23

‘C’ Section Single Ladder


CD220 1.88m 3.21m 9.50kg 7CD225 2.38m 4.21m 12.30kg 9CD230 2.88m 5.21m 15.00kg 11CD235 3.38m 6.21m 17.20kg 13CD240 3.88m 7.21m 20.00kg 15CD245 4.38m 8.21m 22.20kg 17CD250 4.88m 9.21m 25.40kg 19CD255 5.38m 9.96m 28.10kg 21CD260 5.88m 10.96m 30.40kg 23

‘C’ Section Double Extension


CT320 1.88m 4.08m 14.50kg 7CT325 2.38m 5.58m 18.10kg 9CT330 2.88m 7.08m 22.20kg 11CT335 3.38m 8.58m 26.30kg 13CT340 3.88m 10.08m 29.90kg 15CT345 4.38m 11.58m 33.60kg 17CT350 4.88m 13.08m 37.70kg 19

‘C’ Section Triple Extension

C Section LadderL7EQ Glassfibre Push-Up Ladder ● Certified to BSEN131 :1993

● Part certified to ANSI A14.5 - 1982

● Specifically designed for British Telecom linesmen, this ladder is ideal to use in environments where electrical hazards exist

● Unique aluminium ‘butterfly’ rung provides excellent balance and support at the top of the ladder

● Fitted with a double safety catch and a lashing rope to ensure safety when in use

● Nylon rollers fitted to the bases and middle sections enable the operator to erect theladder with the minimum of effort


L7EQ 2.5m 6.0m 23.00kg 8

Triple Extension Push-up Ladder

Glass Fibre Push-up Ladder


TRL - Trade Roof Ladders● Lightweight but combines the strength of a

trade ladder with a heavy duty ridge hook

● Industrial non-slip rungs & box sectionstiles

● Rubber covered bearer bars distributes weight evenly preventing damage to roof

● Available in single and double sections

● Double sections fitted with safety catches

Trade Roof Ladders

Code Closed Overall Rungs WeightLength Length

TRL130 - 2.95m 11 8.50kgTRL135 - 3.45m 13 10.00kgTRL140 - 3.95m 15 11.00KgTRL145 - 4.50m 17 11.50kgTRL150 - 4.97m 19 12.00kgTRL155 - 5.46m 21 13.50kg

Single Section

Code Closed Overall Rungs WeightLength Length

TRL230 2.94m 4.64m 11+9 14.00kgTRL235 3.44m 5.64m 13+11 16.00kgTRL240 3.94m 6.64m 15+13 18.00kgTRL245 4.30m 7.67m 17+15 20.00kg

Two Section Extension

A passion for quality combinedwith an experienced, skilled

production team ensures LyteIndustrial products maintains its

reputation for service excellence

RLE - Industrial Roof Ladder Extensions

● Made to the same specifications as the Industrial Roof Ladders

● Supplied with stile spigots and drop nose locking pins for a secure attachment

RL - Industrial Roof Ladders● Manufactured with industrial strength

aluminium, with oval section stiles and heavy duty non-slip rungs, incorporating a heavy duty ridge hook

● Rubber covered bearers bars distributes weight evenly to prevent damage to roof surface

● This single section ladder can be extended to a variety of lengths with the use of roof ladder extension pieces

Code Overall Weight RungsLength

RL1 3.37m 10.40kg 12RL2 4.43m 11.30kg 14RL3 4.94m 12.30kg 16RL4 5.55m 13.20kg 18

Code Overall Weight ExtraLength Rungs

RLE3 0.90m 3.20kg 3RLE4 1.20m 4.10kg 4RLE6 1.80m 5.90kg 6RLE12 3.60m 8.60kg 12

Industrial Roof Ladders

15www.lyteladders.co.uk

Hailo ProfiStep®

Order Now! Call: 01639 84680014

Hailo Gangway StepladdersEconomic Folding StepProfiStep® Gangway The ergonomic aluminium folding steps havean extra high, curved safety grab rail andextra deep platform. The ergonomicallyshaped steel platform also has a non-slipsurface providing sufficient legroom andstability.

Silver Award winner, Hardware category -Industry Awards 2007

Extra high, curved, easygrip aluminium safetygrab rail to pull yourself up, for a secure gripor simply to lean against● 2 or 3 broad, extra deep (380 x 260 mm)

steel platforms (powdered silver) whichcurve into each other.

● Steps with non-slip surface ensureclimbing up is safe

● Large PVC feet enhance stability and non-slip safety

● Hinged lock (safety locking mechanism)

● Hailo hinge protection

● Intertek/GS safety tested

● Manufactured to EN14183

● 10 year warrantyCode: 4392

Code: 8854

Code: 8945

Code No. of Achievable Weightsteps working height

4392 2 226cm 5.50kg4393 3 250cm 7.70kg

Code: 4393

Hailo Deluxe widestep step ladder with extendable handrail● Ideal for 3 points of contact when using a

step ladder

● 60% deeper treads

● Non slip and non marking feet

● Multifunction tray for paint tins and tools

● Bucket hook

● Folds away for easy storage

● Maximum load capacity 150kg

● 10 year guarantee

● EN131

Code Treads Platform Achievable WeightHeight working

height8853 3 62cm 237cm 4kg8854 4 84cm 259cm 4.8kg8855 5 106cm 281cm 5.8kg8856 6 128cm 303cm 6.6kg

Aluminium Ladder ProfiStep®

● Plastic rail with intergrated bucket hook

● Aluminium platform with non slip ribbingand hinge spreader

● Safe, high-tech riveted stile-step joins

● Slip resistant feet

● Wide aluminium steps with non-slipsurface

● Can take loads up to 150kg

Code No. of Platform Achievable WeightSteps Height working

height8943 3 62cm 2.37m 3.30kg8944 4 84cm 2.59m 3.90kg8945 5 106cm 2.81m 4.60kg8946 6 128cm 3.03m 5.60kg8947 7 150cm 3.25m 6.3kg8948 8 172cm 3.46m 7.30kg


BSBB / BSBP - Trade Stepladders ● Certified to EN131 and BS2037 Class 1

● Unique strengthening beam incorporated into non-slip treads, rubber feet and aluminium side arms prevents slips and twists as there are no tapes to snap, or flimsy arms to break

● Rigid box section back legs with additional cross braces and ‘k’ straps for increased strength and stability

● Lightweight and easy to carry

● Plastic tool tray to hold tools andequipment while working

Code Open Closed Treads WeightHeight Height

BSBB3 0.58m 0.66m 3 2.60kgBSBB4 0.81m 0.89m 4 3.30kgBSBB5 1.03m 1.14m 5 4.00kgBSBB6 1.26m 1.38m 6 4.70kgBSBB7 1.48m 1.62m 7 5.40kgBSBB8 1.70m 1.86m 8 6.10kgBSBB10 2.17m 2.34m 10 6.80kgBSBB12 2.57m 2.82m 12 7.50kg

BSBB Swingback Stepladder

Code Overall Platform Closed Treads WeightOpen Height Height Inc

Height PlatformBSBP3 1.24m 0.59m 1.35m 3 4.50kgBSBP4 1.46m 0.81m 1.59m 4 5.26kgBSBP5 1.68m 1.03m 1.83m 5 6.02kgBSBP6 1.91m 1.26m 2.07m 6 6.78kgBSBP7 2.13m 1.48m 2.31m 7 7.54kgBSBP8 2.31m 1.68m 2.55m 8 8.30kgBSBP10 2.74m 2.12m 3.01m 10 9.06kgBSBP12 3.20m 2.60m 3.52m 12 9.82kg

BSBP Platform Stepladder

BSBB6

ENSP4

ENSP Large Step

BSBP6

Trade StepLaddersLightweight StepLaddersENSP - Aluminium Step Ladder● Secure non-slip treads

● Secure platform safety catch

● Comfortable hand grip at top of platformstep,foam covered on treads 7 and above

● Suitable for domestic use

● Certified to EN131

Code Platform Weight RungsHeight

ENSP4 870mm 3.95kg 4ENSP6 1295mm 6.10kg 6ENSP7 1510mm 6.70kg 7ENSP8 1725mm 7.40kg 8

A truelyreliable

lightweightstepladder



ESS3 0.58m 0.66m 3 2.40kgESS4 0.81m 0.89m 4 2.50kgESS5 1.03m 1.14m 5 3.40kgESS6 1.26m 1.38m 6 4.50kgESS7 1.48m 1.62m 7 5.10kgESS8 1.70m 1.86m 8 6.00kgESS10 2.17m 2.34m 10 6.60kgESS12 2.57m 2.82m 12 7.30kg

ESS - Swingback Stepladders

Code Overall Platform Closed Treads WeightOpen Height Height Inc

Height PlatformESP3 1.24m 0.59m 1.35m 3 4.20kgESP4 1.46m 0.81m 1.59m 4 4.50kgESP5 1.68m 1.03m 1.83m 5 5.40kgESP6 1.91m 1.26m 2.07m 6 6.00kgESP7 2.13m 1.48m 2.31m 7 6.60kgESP8 2.31m 1.67m 2.55m 8 7.25kgESP10 2.74m 2.12m 3.01m 10 8.80kgESP12 3.20m 2.60m 3.52m 12 9.50kg

ESP Platform Stepladder

ESS / ESP - Trade Stepladders ● ESS Certified to EN131 and BS2037 Class 1

● ESP range certified to BS2037 Class 1

● Unique strengthening beam incorporated into non-slip treads

● Rubber feet and aluminium side arms prevents slips and twists as there are no tapes or flimsy arms to break


● Ideal for light trade use

ESS8

ESP8

Trade StepLaddersGFBB / GFBPGlassfibre Swingback & PlatformStepladders ● Certified to BSEN131

● Non-conductive so is ideal to use where electrical hazards exist

● Unique strengthening beam incorporated into non-slip treads, rubber feet and aluminium side arms prevents slips and twists as there are no tapes to snap, or flimsy arms to break

● Rigid box section back legs with additional cross braces and ‘k’ straps for increased strength and stability. Back legs are also reinforced. This applies to 10 and 12 tread stepladders ONLY.


● Plastic tool tray to hold tools andequipment while working


GFBB3 0.55m 0.59m 3 3.25kgGFBB4 0.77m 0.85m 4 4.25kgGFBB5 0.99m 1.1m 5 4.75kgGFBB6 1.22m 1.34m 6 5.50kgGFBB7 1.44m 1.58m 7 6.50kgGFBB8 1.70m 1.81m 8 7.50kgGFBB10 2.11m 2.29m 10 9.00kgGFBB12 2.54m 2.77m 12 10.50kg

GFBB - Glassfibre SwingbackStepladders

Code Open Platform Closed Treads WeightHeight Height Height

GFBP3 1.23m 0.59m 1.33m 3 5.00kgGFBP4 1.44m 0.82m 1.56m 4 6.00kgGFBP5 1.67m 1.04m 1.8m 5 7.00kgGFBP6 1.89m 1.26m 2.04m 6 8.00kgGFBP7 2.1m 1.48m 2.27m 7 9.00kgGFBP8 2.31m 1.69m 2.51m 8 10.00kgGFBP10 2.73m 2.11m 3m 10 12.00kgGFBP12 3.17m 2.56m 3.47m 12 14.00kg

GFBP - Glassfibre PlatformStepladders

GFBB6

GFBP6

Glassfibre StepLadders

21www.lyteladders.co.uk

Widestep StepLadders

Order Now! Call: 01639 84680020

Aluminium Wide Step● Certified to BSEN131

● Wide working platform of 400mm x 600mm

● All aluminium frames and treads

● Suitable for industrial work as well as tradeuse

● Wheels at rear

● Safety chain for added security

Optional Feature

● Ladder tag for inspection and maintenance

Glass Fibre Wide Step● Certified to BSEN131

● Wide working platform of 400mm x 600mm

● Glass fibre frame with aluminium treads

● Suitable for industrial work as well as trade use

● Wheels at rear

● Safety chain for added security

Optional Feature

● Ladder tag for inspection and maintenance

BSWP4

GFWP4

Code Open Platform Closed Treads WeightHeight Height Height inc platform

BSWP3 1625mm 610mm 1780mm 3 8.00kg

BSWP4 1840mm 835mm 1980mm 4 9.00kg

BSWP5 2050mm 1050mm 2225mm 5 10.00kg

Code Open Platform Closed Treads WeightHeight Height Height inc platform

GFWP3 1625mm 610mm 1780mm 3 9.00kg

GFWP4 1840mm 835mm 1980mm 4 11.00kg

GFWP5 2050mm 1050mm 2225mm 5 14.00kg

Industrial StepLaddersSL - Industrial Swingback

Stepladders● Certified to BS2037 Class 1

● A wide range of stepladders designed for general trade or industrial use

● Double riveted with ‘K’ straps for additional strength and stability

● Non-slip treads and rubber feet also keep steps stable

● Robust working platform

● Now manufactured with box section backlegs for extra strength and stability

Code Actual Open Weight TreadsHeight

SL3 0.71m 3.20kg 3SL4 1.00m 4.10kg 4SL5 1.22m 5.00kg 5SL6 1.46m 5.90kg 6SL7 1.71m 6.80kg 7SL8 1.95m 8.20kg 8SL9 2.19m 9.10kg 9SL10 2.44m 10.00kg 10SL11 2.68m 10.90kg 11SL12 2.93m 11.80kg 12SL13 3.17m 13.20kg 13

SL5

● Double rivets for harder wearing ● Heavy duty side arms for strength

SP10

SP - Extra Heavy Duty Platform Steps

● Certified to BS2037 Class 1

● Designed as a heavy duty version of the industrial platform step, available in alarger range

● Box section back legs, heavy duty side arms and heavy bracing ‘K’ straps provides excellent strength and stability

Code Open Height Actual Open Weight Rungsto Platform Height

SP6 1.46m 1.95m 9.50kg 6SP8 1.95m 2.44m 12.30kg 8SP10 2.44m 3.26m 15.00kg 10SP12 2.93m 3.78m 17.70kg 12SP14 3.42m 4.30m 20.90kg 14SP16* 4.10m 4.60m 24.50kg 16*not kitemarked


Industrial StepLadders Glassfibre StepLaddersGSL - Heavy Duty Glassfibre

Swingback Stepladders● Certified to BSEN131

● Non-conductive, so is ideal to use where electrical hazards exist

● Designed for general trade or industrial use

● Non-slip treads and feet keep stepsstable


GSP - Heavy Duty Glassfibre Platform Stepladders

● Certified to BSEN131

● Non-conductive, so is ideal to use where electrical hazards exist

● Designed for general trade or industrial use

● Non-slip treads and feet keep stepsstable


Code Open Closed Base Base Treads WeightHeight Height Width Span

GSL4 0.99m 1.14m 0.41m 0.76m 4 8.00kgGSL6 1.47m 1.64m 0.46m 1.07m 6 10.00kgGSL8 1.93m 2.16m 0.51m 1.50m 8 12.00kgGSL10 2.44m 2.69m 0.56m 1.78m 10 15.00kgGSL12 2.91m 3.23m 0.61m 2.13m 12 19.00kgGSL14* 3.42m 3.75m 0.66m 2.54m 14 23.00kg*not kitemarked

Code Open Closed Platform Treads WeightHeight Height Height

GSP4 1.47m 1.64m 0.98m 4 11.00kgGSP6 1.93m 2.16m 1.45m 6 14.00kgGSP8 2.44m 2.69m 1.94m 8 17.00kgGSP10 2.91m 3.23m 2.41m 10 20.00kgGSP12 3.38m 3.76m 2.90m 12 23.00kgGSP14* 3.89m 4.29m 3.40m 14 26.00kg*not kitemarked

GSL8

GSP6

“strengthand stability

comes asstandard”


Ladda StepsLS - Ladda-Steps● As its name suggests this versatile piece

of access equipment can be used as aladder and a step

● It’s easy to convert with uncomplicated locks

● Made from industrial material it provides a durable solution to access problems

Code Open Height Open Height Weight Treadsas Step as Ladder

LS6/4 1.48m 2.55m 7.00kg 6+4LS7/5 1.72m 3.07m 8.00kg 7+5LS8/6 1.98m 3.62m 9.00kg 8+6

LS7/5

Multi Purpose Ladders

MPL Frame

MPL Extended 2MPL Closed

MPL Platform

MPL● Compact dimensions for easy

transportation and storage

● Removable platform (4x3 only)

● Stabilisers for extra stability

● Simple ‘click lock’ hinge system

● Suitable for wide variety of uses

● Suitable for trade and domestic use

● EN131

Code Stepladder Platform Extension Product Height Height Ladder weight

MPL4X3 1753mm 920mm 3560mm 13.95kgMPL4X4 2270mm N/A 4680mm 15.55kg


TLS

TLS Extended

TLS ExtendedTLS Hinge

TLS on stairs

TLS● Adjustable, telescopic sections and simple

‘Click-Lock’ hinge system

● Can be used as a stepladder, stairwellladder and extension ladder

● Compact folded dimensions, very easy touse, transport and store

● Non-slip feet and splayed base for extrastability

● Suitable for professional and domestic use

● Tested to EN131

Code Sections Stepladder Extension Product x rungs Height Ladder weight

HeightTLS4x4 4x4 1300mm 2660mm 13.70kg

to 2168mm to 4425mm

CL

CL - Combination Ladder● Combines a stepladder and extension

ladder in one product

● Unique sliding mechanism for easyconversion to all three ways

● Wide base and heavy duty feet for stabilityand grip

● Non-slip treads for comfort and security

● Compact folded dimensions for easytransportation and storage

● Stabilisers for extra stability

● Suitable for a wide variety of uses

● Suitable for trade and domestic use

● Certified to EN131

Code Folded Stepladder Extension Product Height Ladder Weight

LengthCL6 1680mm 2390mm 3280mm 9.20kgCL7 1960mm 2924mm 4123mm 10.40kgCL8 2240mm 3450mm 5064mm 12.30kgCL9 2525mm 3906mm 5910mm 13.45kgCL10 2800mm 4473mm 6740mm 15.20kg

Telescopic Ladders Combination Ladders

Order Now! Call: 01639 84680028 www.lyteladders.co.uk 29

Professional Combi Ladder Professional Combi Ladder

Code Rungs Closed Stepladder Extension Max Achievable WeightHeight Height Ladder Working Height

Height (Extension Ladder)

9306-501 2x6 + 1x5 1.92m 2.85m 3.70m 4.80m 15.40kg9309-501 2x9 + 1x8 2.72m 4.18m 5.60m 6.70m 21.50kg9312-501 3x12 3.57m 5.53m 8.15m 9.25m 30.50kg

Balance PedalOne kick of the foot - the balance pedalengages - and the ladder is safe to use. Thenewly developed foot pedal allows you toadjust the ladder quickly and precisely to dif-ferent levels on the ground, making heightdifferences of up to 15cm! To adjust, all youneed to do is push the pedal forward withyour foot. Easy to use: no bending, no bolts.The innovative level adjustment mechanismnow makes working on uneven ground saferand more comfortable.

Aluminium combination ladder,3-part ProfiStep® combiThis combination ladder turns the three-partladder into a two-part extension ladder, asimple lean-to ladder or even a free-standingdouble-sided ladder, you decide!

The ultimate solution: flexible,versatile and safe.Easy to use

● Just set up the ladder using the foot pedal

Versatility

● Single ladder, extending ladder ordouble-sided rung ladder

Safety

● Sturdy guide parts with plasticgliders

● Fitted with locking device to useduring transport

● Square, sturdy grip rungs

● Can take loads up to 150 kg

● Feet on ladder and balancepedal designed formaximum contact withsurface

● Balance pedal bar fittedwith manual lockingpedal

● Two highly tear-resistant tensionstraps

● Locking viabalance pedal

● ITS/GS + BGVD 36 safetytested

● Manufacturedto EN 131

● VDL safetytested

9309-501 9306-501

WS - Warehouse Steps● Manufactured with industrial strength

aluminium

● Ideal for warehouse and factory use

● Heavy duty back support legs and side handrails

● Rear wheels for easy positioning

● Additional bracing ensures a strong robust product

● WS8-14 are supplied as a flat pack

WS5

Specialist Ladders

Code Open Height Weight Rungsto Platform

WS4 1.00m 9.90kg 4WS5 1.22m 11.30kg 5WS6 1.46m 12.70kg 6WS7 1.71m 14.50kg 7WS8 1.95m 15.90kg 8WS10 2.44m 20.00kg 10WS12 2.93m 23.60kg 12WS14 3.42m 26.80kg 14

Step Extension Stairwell Step Extension StairwellLadder Ladder Ladder Ladder Ladder Ladder

1212-601 1x6 1.68m 2.50m 1.50m 2.75m 3.50m 3.20m 5.60kgrungs+ 1x5rungs

Universal aluminium ladderHobbyStep® (3-way ladder)● Single or double-length lean-to ladder or

free-standing double-sided rung ladderwith step adjustment

● Sturdy locking hooks made fromgalvanized steel

● Wide stiles and rungs, extremely solid joinsand double beaded

● Wide crosspiece

● Can take loads up to 150 kg

● Adjustable tension strap

● ITS/GS + BGV D 36 safety tested

● Manufactured to EN 131

● VDL safety tested

1212609470-001

Discover the ideal multifunctional ladder for the home! It offers all three options in one: lean-toladder, trestle ladder and extending ladder. The brilliant connecting system enables variableheight adjustment. This means that the ladder can be assembled even in narrow stairwells. Thewide crosspiece ensures a safe base.

Code Rungs Height of Ladder Achievable working height Weight


Multi-purpose PlatformsAluminium mini scaffold with working platform ProfiStep® multi● Can be used on staircases

● Platform (125 x 50 cm) height adjustable in28 - 100 cm increments

● Aluminium right-angled struts

● Safety rail

● 2 cross pieces

● Inc. assembly parts

● Load capacity: max. 150 kg

● Achievable working height – 3m

● Weight 12.90kg

● Platform width – 0.5m

● Platform length – 1.25m

● Stabiliser width – 0.85m

● Height (full height of mini scaffold) – 1.53m

● ITS/GS + BGV D 36 safety tested

● VDL safety tested

Multi-purpose ladder andplatform system● A solid foundation for jobs requiring more

time and freedom of movement

● Wide working surface: 150 x 50 cm

● 2 separately usable ladder elements, 6rungs each

● 2 sturdy crosspieces on each ladder ele-ment for more stability

● Load capacity: max. 150 kg

● Manufactured to EN 131

Code Ladder Base to Closed height Stepladder Extension Max achievable Weight rungs platform of of ladder height ladder working height

mini scaffold sections height (extension ladder)

HD628 2x6 0.77m 1.69m 1.63m 2.72m 3.82m 18.00kg


Code Height Weight RungsSingle toSided PlatformL3 0.73m 6.50kg 3L4 0.98m 8.00kg 4L5 1.22m 9.00kg 5

L / LD - Platform / Library Steps● Manufactured with industrial strength

aluminium

● Non-slip treads and a large non-slipplatform provides a safe working area

● Single sided step with optional handrails & handposts

● Also available as a double sided step

L - Single Sided Platform / Library Steps

Code Height Weight RungsDouble toSided PlatformLD3 0.73m 7.50kg 3LD4 0.98m 9.00kg 4LD5 1.22m 11.00kg 5

LD - Double Sided Platform / Library Steps

L4

LD4

SX - Shelf Ladders● Specifically designed for access to and from

shelving units

● Lightweight but extremely rigid

● Timber cross rail fitted as standard, shafting hooks fitted on request

Code Overall Work Weight TreadsLength Height

SX5 1.34m 1.20m 3.50kg 5SX6 1.60m 1.46m 4.00kg 6SX7 1.86m 1.71m 4.50kg 7SX8 2.12m 1.95m 5.00kg 8SX9 2.39m 2.20m 5.90kg 9SX10 2.65m 2.44m 6.40kg 10SX11 2.92m 2.68m 7.30kg 11SX12 3.18m 2.93m 7.70kg 12SX13 3.45m 3.17m 8.60kg 13

SX

Specialist Ladders Specialist Ladders

Code Length Weight No. of sectionsSU2 1.80m 4.10kg 2SU3 2.70m 5.90kg 3SU4 3.60m 8.20kg 4SU5 4.50m 10.00kg 5SU6 5.40m 11.8kg 6

Sectional ‘Surveyors’ Ladders● Interlocking sectional ladders,

manufactured in oval section with serratedrungs

● Very easy to use, designed for inspection purposes only and can be easily stored in the boot of a car

● Each section is supplied with aluminium locating spigots, which are inserted intothe stiles of the next section

● Safe, light ladder that can extend to 5.4 m

FPT

FPT Ladder● Constructed from industrial duty aluminum

and used by professional groundsmen

● Allows the user to work close to hedges,bushes and trees with rear spiked support.

● Channel section side stiles fitted with 3” /76mm deep non-slip treads and rubberfeet at base.

● Heavy duty rear leg is hinged at the topand fitted with a sturdy ground spike forextra security. Additional interchangeablenon-slip rubber foot also supplied for safeuse on hard surfaces, available on requestonly.

● Lightweight, mobile, yet very strong. Amust for all serious professionals.

Code Open Closed Treads Product Height Height (Not including Weight

the top)

FPT1 1720mm 1900mm 5 7.00 kgFPT2 2210mm 2480mm 7 9.00kgFPT3 2930mm 3210mm 10 12.00kgFPT4 3530mm 3910mm 12 15.00kgFPT5 3920mm 4170mm 14 19.00kg


LYTE EASILOFT2 and 3 Section Loft Ladders

● Factory assembled - installs in minutes

● Certified to BS 7553: 1992 Class G (General use)

● Clear and easy to follow instructions

● Box section styles for strength and comfort

● Spring loaded catches, safer and stronger

● Handrail included on double and triple

● Non slip rubber feet for safety

● Maximum load 15.7 stone

Product Code LEL2 LEL3

sections 2 3

max floor to floor 2.67m 3.0m

min loft clearance 1250mm 1050mm

min loft opening 457x560mm 432x508mm

LEL2

2 part EASILOFT - LEL2

3 part EASILOFT - LEL3

MINLoft ClearanceRequired1250mm

MINLoft opening457mm wide560mm long

MAXGround floorto loft floorheight 2.67m

2.67m MAX

LEL3

MINLoft ClearanceRequired1050mm

MINLoft opening432mm wide508mm long

MAXGround floorto loft floorheight 3.0m

3.0m MAX

Loft Ladders Accessories1. Ridge hookFitted as standard to the Lyte Roof ladder, thehook becomes the Anchor of the system.

2. RojackThis unique rubber based platform greatlyincreases the footprint of the ladder, helpingprevent slip of the base of the ladder.

3. Ladder stayNot only does this device increase the widthof the extension ladder reducing the risk ofladder twist/slip, also prevents damage toguttering!

4. The MultistopperMS24 for Industrial/Trade use is suitable forladders up to 22 inches (55cms) wide and canbe used with or without Stopper Feet. StopperFeet with integrated stile extenders can be fit-ted permanently or temporarily to any ladder.Used with or without MS24. Feet by them-selves perform same function as STO18.Helps prevent bottom slip on all surfacesincluding uneven ones.

Used in conjunction with MS24 becomes theMultiStopper System which:-

● Helps prevent bottom slip

● Helps prevent top movement

● Levels on all surfaces; uneven, sloping,

and with insert can be used on stairs

● Fastens the Stopper base to the ladder

1

2

3

4


Accessories

A

A

BB

E

DC

A. Step FeetSolid moulded rubber feet designed to ensureultimate grip on a variety of floor surfaces

B. Ladder FeetPVC moulded feet give all round secure footingto the whole ladder range

C. Rubber Suction FeetDesigned to give good grip on shiny surfaces

D. Articulated FeetSolid rubber moulded feet are designed to givegood grip on a variety of surfaces. Manufacturedto fit all box section and timber laddersCode C1006 one pair

E. Wall Running WheelsReplacement heavy duty solid rubber wheelscomplete with fixingsCode WRW one pair

Rope Kit (not shown)Replacement nylon rope kit for heavy dutyextension laddersCodeHDROPE Double Extension Ladder Rope KitHTROPE Triple Extension Ladder Rope KitWhen ordering, please quote the length of the ladder.

F. Ridge Hook● Replacement hook for trade and industrial

roof ladders● Easily attachedCode RHW

Universal Roof Hook (not shown)● Designed to turn any ladder into a roof

ladder● Aluminium hook and wheels● Easily attachedCode ARH

G. Ladder Stay● Designed to keep the top end of the ladder

300mm away from a solid surface, to assist in painting, glazing and general maintenance

● Easy to attach and detach, suitable for domestic, trade and industrial use

Code LLS

H. Rack Clamps● Easy to use clamps designed to lock ladders

and steps securely in place whilst on a roof rack

● Available with or without padlocksCode

C1443 one pairC1443A one pair with padlocks

G

H

F

Lightweight Staging Boards -Standard width and extra wide● Manufactured to BS2037 Class1

● Can be used in conjunction with various handrail systems

● Available in 2.4m to 7.2m

● Non slip rot proof decking

● Rubber inserts for additional grip

● Aluminium struts

● Rubber end caps

● “K” straps – fitted to end struts

PTP - Trestle - Suitable for both450mm and 600mm boards● Tested and certified to BS2037 Class1

● Available in various configurations for use with other trestles

● Designed not to oversplay and split

Code Width Length WeightPROEX24 600mm 2.4m 14.96kgPROEX30 600mm 3.0m 17.63kgPROEX36 600mm 3.6m 22.53kgPROEX42 600mm 4.2m 25.37kgPROEX48 600mm 4.8m 27.09kgPROEX54 600mm 5.4m 38.27kgPROEX60 600mm 6.0m 41.71kgPROEX66 600mm 6.6m 51.00kgPROEX72 600mm 7.2m 54.52kg

Code Width Length WeightPRO24 450mm 2.4m 11.18kgPRO30 450mm 3.0m 13.16kgPRO36 450mm 3.6m 16.77kgPRO42 450mm 4.2m 18.92kgPRO48 450mm 4.8m 20.21kgPRO54 450mm 5.4m 28.38kgPRO60 450mm 6.0m 30.96kgPRO66 450mm 6.6m 37.84kgPRO72 450mm 7.2m 40.42kg

Code Open Height WeightPTP1 1740mm 12.70kgPTP2 2300mm 15.90kgPTP3 2900mm 20.00kgPTP4 3500mm 23.60kg

Trestles & Staging Boards

● Handposts and handrails available.For more information on requirementscontact us on 01639 846800


POD960

Podium 960mm

POD14

● Meets all the requirements of the newWorking at Heights Regulations - this itemprovides an excellent alternative to stepladders.

● The work platform offers massive safety:1000mm all round lockable guardrailsystem with non-slip platform surface -even in the rain.

● ‘Locking’ 360º rotating wheels, for addedsafety & stability.

● Offers flexibility for working in all locations- folds up in seconds & fits through astandard door way - back of vans or on aroof rack.

● It is self contained in one piece & caneasily be handled by one person.

● Is manufactured from aluminium - is alightweight product, durable and willprovide an exceptional work tool for allusers.

● Is made to Lyte Industries highest quality ofUK manufacture.

★ Please remember - a thorough riskassessment must be carried out prior toany work being undertaken at height.

Podium Steps Low Level Work Platform

Depth Open Open WeightHeight Width

1200mm 1830mm 650mm 32.00kg

Podium 1.2Depth Open Open Weight

Height Width

1200mm 2210mm 650mm 37.50kg


Height Width

1200mm 2430mm 650mm 38.50kg


Height Width

1200mm 2680mm 650mm 40.00kg


Height Width

1200mm 2930mm 650mm 42.00kg

WPS 1 & 2● Simple and safe to use with locking

hinges for added safety

● Non slip platform

● Perfect for all odd jobs

● Compact folded dimensions

● Lightweight - easy to transport

● Tested to EN131

● Available in 2 lengths,600mm and 1000mmWPS1

WPS2

WPS lock

WPS lock open

Code Platform Platform Platform ProductWidth Length Height Weight

WPS1 300mm 600mm 480mm 4.65kgWPS2 300mm 1000mm 480mm 5.60kg

A truely reliablelightweight low

level workplatform


Roof Buddy Roof BuddyThe Roof Buddy SystemThe RoofBuddy is a unique productdesigned and engineered to make work onroofs safer than ever before. Offering acomprehensive 4-point safety system, theRoofBuddy provides an integral safetysolution with the highest quality accessequipment from Lyte Ladders and Towers.

Roof Buddy - The Package

Roof BuddyThis unique bracket formsthe centre point of the “Safe working system”. Manufacturedspecifically for the Lyte Ladder profile, this bracket “locks”the roof and upright ladder together, thus providing the fixedsystem.

Extension Ladder3 Section extension ladder to access the roof.

Dimensions:Closed height 4.04mExtended height 10.22m

Roof Ladder with Ridge HookSpecially designed double section roof ladder with ridge hookfitted as standard, the hook becomes the Anchor of thesystem.

Dimensions:Closed height 2.72mExtended height 4.7m

Ladder StopperThis unique rubber based platform greatly increases thefootprint of the ladder, thus helping prevent the base of theladder from slipping.

Anchor PointsThese are fitted at the top of the roof ladder near the ridgehook as a safe anchor point for the harness kit.

Ladder StayNot only does this device increase the width of the extensionladder reducing the risk of ladder twist/slip, it also preventsdamage to guttering!

Fall Arrest Harness KitThis consists of:Full body harnessAnchorage line‘Y’ LinkCowstails slingRockerKarabiners.

TrainingFull training on the use of the RoofBuddy system and thesafe use of ladders.

Devised in conjunction with British Gas & Lyte Industries


Lyte Industrial Folding Tower System - LIFT● Base can be used alone, or increased by a

further 3 lifts which can give an extra 7 platform heights (using extra components)

● Tested and certified to BS EN1004

● Fits easily into most small vans or estate cars

● Quick and easy to erect – saving time on each job

● Narrow tower width – compact & easy storage

● Quick release pull rings with stainless steel pin on all bracings for easy assembly

● Smooth & ribbed texture on braces for quick identification

★ Please remember - a thorough risk assessment must be carried out prior to any work being undertaken at height

LIFT System

Folding ‘base mechanism’- a truly portable

tower

LIFT System

Platform Height (Max) 0.6m 1.6m 2.1m 3.1m 3.6m 4.6m 5.1m 6.1m

125mm castors (standard) 4 4 4 4 4 4 4 4

150mm castors (For adjustable legs only) 4* 4* 4* 4* 4* 4* 4* 4*

Adjustable legs 4* 4* 4* 4* 4* 4* 4* 4*

Base Unit 1 1 1 1 1 1 1 1

6 rung frame 0 0 2 2 4 4 6 2

8 rung frame 0 0 0 0 0 0 0 4

1.8 hatch deck 1 1 1 2 2 2 2 3

4 rung frame 0 2 0 2 0 2 0 0

1.8m horizontal brace 3 5 5 9 9 9 9 13

2.1m Diagonal brace 0 1 2 3 3 4 5 6

1.8 toe board length 2 2 2 2 2 2 2 2

1.2 Toe board end 2 2 2 2 2 2 2 2

Standard Stabiliser 0 4 4 4 4 0 0 0

Telescopic Stabiliser 0 4* 4* 4* 4* 4 4 4

* Indicates optional components* Indicates fewer horizontals needed because gate-frame acts as a guardrail.

Component Schedule


Technical Specification

● Two widths available 1.45m & 0.85m

● Three lengths available 1.8m 2.5m & 3.2m

● Extruded tube diameter 50.8mm

● Extruded tube thickness 1.6mm

● 3mm Frame spigots

● Extruded aluminium ladder stile & rung

● Heat treated gravity castings

● Stainless steel bracing lock pins

● Articulated rubber feet

● Spring steel frame lock clips

● Reinforced platforms

Helix Industrial Tower System● Tested and certified to BS1139 (Part 3)

1994 and HD1004 *

● Dual brake on/off system

● Quick release pull rings with stainlesssteel pin on all bracings

● Smooth & ribbed tubing on braces forquick identification

● Wide ladder with hexagonal rung foreasier climb & additional safety

● Large, articulated rubber feet on all stabilisers

* Certification correct at time of print.

Helix Industrial Tower SystemHelix Industrial Tower System


Helix Industrial Tower SystemLyte 3T Industrial Tower System Single Width to HD1004:2004 1.8m 2.5m

Lyte 3T Industrial Tower System Double Width to HD1004:2004 1.8m 2.5m

Component Schedule Internal or external work Internal only

Platform Height (metres) 1.2 1.7 2.2 2.7 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 8.7 9.2 9.7 10.2 10.7 11.2 11.712.2

150mm Dual Locking Castor - DLC 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

Adjustable Leg - ALH 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

2 Rung Span Frame - 2RSWSF - 1 1 - 1 1 - - 1 1 - - 1 1 - - 1 1 - - 1 1

2 Rung Ladder Frame - 2RSWLF - 1 1 - 1 1 - - 1 1 - - 1 1 - - 1 1 - - 1 1

3 Rung Span Frame - 3RSWSF - 1 - 1 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 -

3 Rung Ladder Frame - 3RSWLF - 1 - 1 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 -

4 Rung Span Frame - 4RSWSF 1 - 1 1 1 2 2 3 2 3 3 4 3 4 4 5 4 5 5 6 5 6

4 Rung Ladder Frame - 4RSWLF 1 - 1 1 1 2 2 3 2 3 3 4 3 4 4 5 4 5 5 6 5 6

1.8m-2.5m-3.2m Hatch Deck 1 1 1 1 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6

1.8m-2.5m-3.2m Horizontal Brace 6 6 6 6 10 10 14 14 14 14 18 18 18 18 22 22 22 22 26 26 26 26

2.1m-2.7m-3.4m Diagonal Brace 2 4 4 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24

1.8m-2.5m-3.2m Side Toe Board 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Single Width Toe Board End 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Standard Stabiliser - - 4 4 4 4 - - - - - - - - - - - - - - - -

Telescopic Stabiliser - - - - - - 4 4 4 4 - - - - 4 4 4 - - - - -

Large Telescopic Stabiliser - - - - - - - - - - 4 4 4 4 - - - 4 4 4 4 4

Component Schedule based on 3T specification


Platform Height (metres) 1.2 1.7 2.2 2.7 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 8.7 9.2 9.7 10.2 10.7 11.2 11.712.2

150mm Dual Locking Castor 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

Adjustable Leg 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

2 Rung Span Frame - 2RDWSF - 1 1 - 1 1 - - 1 1 - - 1 1 - - 1 1 - - 1 1

2 Rung Ladder Frame - 2RDWLF - 1 1 - 1 1 - - 1 1 - - 1 1 - - 1 1 - - 1 1

3 Rung Span Frame - 3RDWSF - 1 - 1 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 -

3 Rung Ladder Frame - 3RDWLF - 1 - 1 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 -

4 Rung Span Frame - 4RDWSF 1 - 1 1 1 2 2 3 2 3 3 4 3 4 4 5 4 5 5 6 5 6

4 Rung Ladder Frame - 4RDWLF 1 - 1 1 1 2 2 3 2 3 3 4 3 4 4 5 4 5 5 6 5 6

1.8m-2.5m-3.2m Hatch Deck 1 1 1 1 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6

1.8m-2.5m-3.2m Standard Deck 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1.8m-2.5m-3.2m Horizontal Brace 6 6 6 6 10 10 14 14 14 14 18 18 18 18 22 22 22 22 26 26 26 26

2.1m-2.7m-3.4m Diagonal Brace 2 4 4 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24

1.8m-2.5m-3.2m Side Toe Board 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Double Width Toe Board End 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Standard Stabiliser - - 4 4 4 4 4 4 4 4 - - - - - - - - - - - -

Telescopic Stabiliser - - - - - - - - - - 4 - - - 4 4 4 - - - - -

Large Telescopic Stabiliser - - - - - - - - - - - 4 4 4 - - - 4 4 4 4 4

Component Schedule based on 3T specification

HiLyte Industrial Tower System


HiLyte Industrial Tower System HiLyte Industrial Tower SystemHiLyte Industrial Tower SystemThe new HiLyte Tower has been introduced to our successful Tower and Welded product range,as a result of continuous product research, development and innovation.

The 250mm span frame pitch and double hatchdeck enables users to comply with 3Tregulations with ease.

The HiLyte Tower affirms our ongoing commitment to the ever-changing world of Health andSafety in the access equipment industry.

The HiLyte Tower can offer you: • 250mm pitch span frame for strength, stability and ease of use.

• New colour coded braces for effortless assembly.

• Smooth and ribbed tubing on braces for quick identification.

• Double hatchdeck for ease of assembly and safe use.

• Choice of toeboards: standard wooden,or new aluminium folding unit*.

• Fully complies with latest regulations, product standards and requirements - including the 3Tmethod of assembly

• Dual brake on/off system.

• Castings on every rung.

• Quick release.

• Large, articulated rubber feet on all stabilisers.

• Certified to BSEN1004:2004

QUANTITY SCHEDULE HiLyte Industrial Tower SystemSingle Width to BSEN1004:2004 1.8m 2.5m


Platform Height (metres) 1.2 1.7 2.2 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 8.7 9.2 9.7 10.2 10.7 11.2 11.7 12.2

150mm Dual Locking Castor 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

Adjustable Leg - ALH 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

4 Rung Access Frame - HL4SW - 2 2 - - 2 2 - - 2 2 - - 2 2 - - 2 2 - - 2 2

6 Rung Access Frame - HL6SW - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 -

8 Rung Access Frame - HL8SW 2 2 2 4 2 4 4 6 4 6 6 8 6 8 8 10 8 10 10 12 10 12

Hatch Decks 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6

Horizontal Brace 6 6 6 10 10 10 10 14 14 14 14 18 18 18 18 22 22 22 22 26 26 26 26

Diagonal Brace 2 4 4 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24

Side Toe Board 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

- SW as per deck length

End Toe Board - TBESW 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Standard Stabiliser - - 4 4 4 4 4 - - - - - - - - - - - - - - - -

Telescopic Stabiliser - - - - - - - 4 4 4 4 - - - - 4 4 4 - - - - -

Large Telescopic Stabiliser - - - - - - - - - - - 4 4 4 4 - - - 4 4 4 4 4

Components schedule based on 3T specification

QUANTITY SCHEDULE HiLyte Industrial Tower SystemDouble Width to BSEN1004:2004 1.8m 2.5m


Platform Height (metres) 1.2 1.7 2.2 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 8.7 9.2 9.7 10.2 10.7 11.2 11.7 12.2

150mm Dual Locking Castor 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

Adjustable Leg - ALH 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

4 Rung Access Frame DW-HL4SW - 2 2 - - 2 2 - - 2 2 - - 2 2 - - 2 2 - - 2 2

6 Rung Access Frame DW-HL6SW - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 - 2 -

8 Rung Access Frame DW-HL8SW 2 - 2 2 4 2 4 4 6 4 6 6 8 6 8 8 10 8 10 10 12 10 12

Hatch Decks 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6

Standard Deck 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Horizontal Brace 6 6 6 10 10 10 10 14 14 14 14 18 18 18 18 22 22 22 22 26 26 26 26

Diagonal Brace 2 4 4 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24

Side Toe Board 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

- DW as per deck length

End Toe Board - TBEDW 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Standard Stabiliser - - 4 4 4 4 4 - - - - - - - - - - - - - - - -

Telescopic Stabiliser - - - - - - - 4 4 4 4 - - - - 4 4 4 - - - - -

Large Telescopic Stabiliser - - - - - - - - - - - 4 4 4 4 - - - 4 4 4 4 4

Components schedule based on 3T specification


Ladder Safety Training

Ladders & Step Ladders Training Course

* Produced in Association with the BLMA

* Nationally Recognised

Course contents:• Working at Height Regulations. (WAHR)

• Risk assessments for ladders and step ladders.

• Inspection of ladders and step ladders.

• Selection of correct type of ladder/stepladder.

• Safe use of ladders and step ladders.

On completion of the course each delegate will be issued with a

BLMA Certificate and a Training Scheme Photo Identification Card.

For further information contact Lyte Industries Training Centre

Tel: 01639 846801 e-mail: [email protected]

Tower Safety Training

PASMA PROFESSIONAL TRAINING The Work at Height Regulations 2005, require that the assembly, dismantling oralteration of Mobile Access Towers should only be undertaken by a competent person,or if being trained, under the supervision of a competent person.

A competent person is a person who can demonstrate that they have sufficientprofessional or technical training, knowledge, actual experience, and authority* toenable them to:

a. carry out their assigned duties at the level of responsibility allocated to them;

b. understand any potential hazards related to the work (or equipment) underconsideration;

c. detect any technical defects or omissions in that work (or equipment), recogniseany implications for health and safety caused by those defects or omissions, and beable to specify a remedial action to mitigate those implications.

*Note: “authority” here means delegated authority to the individual by his employer tocarry out a certain function or duty.

Going onto or assembling a mobile access tower will involve working at height. TheAdvisory Committee on Work at Height Training (ACWAHT) indicate that for anyone whoworks at height, the above definition of a competent person implies:

To know and understand the specific legal duties under the Work at Height Regulationswhich apply to them as an individual

• To understand who controls their activity and the lines of communication to use

• To understand the principles of fall protection that the Regulations require to be used

• To be able to recognise safe and unsafe situations / activities

• To understand how to deal with the hazards associated with the task allocated tothem

• To have adequate training in the correct use and limitations of any work equipmentallocated to them for the task

• To understand the need for and the ability to check the adequacy of the safetyequipment allocated to them

• If that equipment has been issued to them on a personal basis, an understanding ofthe correct procedure for storage, maintenance and inspection

• To understand safe procedures of work and state the correct procedure for the task,the emergency (including rescue) procedures in place for the work and their role in it

• To know the procedure for reporting any defects, hazards or unsafe procedures theydetect

• PASMA therefore sponsors training courses provided only by authorised trainingmembers.

Conditions of Sale


1. Acceptance and Cancellation(1) No order for Seller’s goods (whether pursuant to a quotation by Seller or otherwise) is binding on Seller untilacknowledged in writing by Seller.

(2) Each order is subject to other Conditions of Sale to which Buyer shall be deemed to assent.

(3) No order shall be subject to other conditions or to modifications of these Conditions unless Seller agreesthereto in writing and Seller shall not be deemed to accept such other conditions nor to waive any of theseConditions by failing to object to provisions contained in any purchase order or other communication fromBuyer.

2. Seller’s Specifications Prices and Charges(1) All descriptions, specifications, drawings and particulars of weights and dimensions submitted by Seller areto be deemed approximate only, and descriptions and illustrations in Seller’s catalogues, price lists and otheradvertising matter shall not form any part of contract.

(2) Until an order has become binding on Seller all prices are subject to change without prior notice.

(3) After an order has become binding on Seller all prices are subject to variations from time to time in listprices and any variations in costs (including without limitation, costs of materials, labour, transport and any tax,fee or charge imposed by any government or other authority) prior to delivery.

3. Payment(1) Unless otherwise agreed by the Seller, or stated in acknowledgement of order, net invoice amount shallbecome due for payment 30 days from date of invoice.(2) Seller reserves the right at any time to demand full or partial payment before proceeding or proceedingfurther with an order.

(3) If Buyer defaults in payment Seller may, in addition to exercising right contained in Condition 3(2), delaydelivery or cancel contract , also cancel other orders received from Buyer and charge interest on any overduepayment at a rate of 2% per month.

4. Delivery of Goods(1) Property in goods shall not pass to the Buyer until the Buyer has paid to the Seller the whole price thereof.All risk of loss or damage in transit, shall pass to the Buyer when goods delivered to Buyer. Delivery to acarrier or to any person, firm or company on Buyer’s behalf shall constitute delivery to the Buyer. Where goodsunascertained, all risk of loss or damage in transit shall pass to Buyer notwithstanding that property in goodsmay not have been passed to the Buyer on delivery to Buyer.

(2) Where goods sold f.o.b. or c.i.f. all risk of loss or damage in transit shall pass to the Buyer when goodsplaced on board ship, notwithstanding that the property in goods may not have been passed to the Buyer andSeller shall be under no obligation to give to Buyer notice of specified in section 2(3) of Sale of Goods Act,1983.

(3) Any time or date specified by Seller as time at which or date on which goods will be delivered given isintended as estimate only and Seller shall not be liable for any loss, damage or expenses whatsoever arisingfrom delay in delivery.

(4) Buyer shall at request of Seller supply Seller with details necessary to allow Seller to make delivery andshall accept delivery whenever Seller proffers delivery. If Buyer does not comply with foregoing it shallindemnify Seller against any consequent loss, damage or expense and Seller may cancel intended deliveryrelated, without prejudice to its right to claim damages in respect of such breach of contract.

(5) Seller reserves the right to make delivery by instalments unless otherwise expressly stipulated in contract.Paragraph (6) of this condition shall apply (mutatis mutandis) to each instalment or delivery.

(6) Delivery of goods of a different description not included in contract shall not entitle Buyer to reject goodsdelivered and Buyer shall treat such delivery as full performance by Seller and of its contractual duty to deliver.

(7) Seller shall be entitled to cancel delivery in whole or in part when it is delayed in or prevented from makingdelivery by strikes, lockouts, trade disputes or labour troubles or any cause beyond Seller’s control, including,but without limitation, act of God, act of Buyer, embargo or other government Act, regulation or request, fire,accident, war, riot, delay in transportation, inability to obtain adequate labour, materials or manufacturingfacilities. Seller shall not be bound to obtain in market goods with which to replace goods delivery of whichhas been cancelled as a result of any said events.

5. Notification of Delivery Query

Claims in respect of error in quality, quantity and condition of goods delivered must be made to Seller within 7days of receipt . Failure to make such notification shall constitute unqualified acceptance of goods and waiverby Buyer of all claims relating to error in quality, quantity and condition of goods delivered. Formal proof ofnotification will constitute a unique reference number that can be obtained from the seller.

Do’s

Do place the ladder / step-ladderon a firm, level, dry surface.

Do position the ladder so that thebase won’t slip outwards, andwith the top resting against asolid surface.Remember the rule:‘One Out for Four Up’

Do keep your body facing theladder at all times.

Do position the step-ladder front-on to the work.

Do keep a secure grip at alltimes, and use a tool holster orshoulder bag if you need to carrytools.

Do check that there are nooverhead hazards near where youare going to work.

Don’ts

Don’t put a ladder / step-ladderon top of boxes, bricks or anyunstable surface to get moreheight.

Don’t move the ladder base outfrom this position - there’s morerisk of it slipping outwardswithout warning.

Don’t reach too far forwards orsideways, or stand with one footon the ladder and the other onsomething else.

Don’t work sideways-on to thework with a step-ladder.

Don’t put loose tools where theycould move or fall and cause aninjury.

Don’t forget - never over-reach.

Using Ladders - Top Tips

55www.lyteladders.co.ukOrder Now! Call: 01639 84680054

A/C Number:

Credit Limit:

Company Name:

Address:

County:

Post Code:

Telephone:

Fax:

Email:

To apply for a credit account please complete, detach and returnthis form to Lyte Industries (Wales) Ltd at address shown.

Accounts Dept: (if different)

Address:

County:

Post Code:

Telephone:

Fax:

Holding/Parent Co:

Company Reg No:

V.A.T No:

Partnership/Sole Trader Only

Trading Title:

Name of partner(s):

Home Address:

Trade References

Company Name:

Address:

County:

Post Code:

Telephone:

Fax:

Company Name:

Address:

County:

Post Code:

Telephone:

Fax:

Please remember to include a sample of company letter headed paper. All goods and services providedby Lyte must be paid within 30 days after the end of the month in which the invoice was issued.

Your Company Bank Details

Banker’s Name:

Address:

Account No:

Signed:

Date:

Internal Use Only

Signature:

Print Name:

Date:

Position:

✁

6. Conditions, Warranties and Return of Goods

(1) Each of Seller and Buyer shall be regarded as having received no representation made by or on behalf ofother of them before contract was entered into, which in anyway induced it to enter into contract, but this shallnot apply to any representation made to one party or on behalf of other which was reduced in writing andsigned by or on behalf of representor and was in possession of representee prior to making of contract, and inparticular, without prejudice to generality of foregoing those recorded in order or acknowledgement of it.

(2) Seller warrants that it has right to sell goods and that goods are free from any liens unknown to Buyer.

(3) Seller undertakes to repair or replace any goods which are shown by Buyer to Seller’s satisfaction to bedefective as a result of a defect in materials or workmanship provided:

(i) Buyer within 7 days of receiving goods notifies Seller of such defect and claims to return goods; and

(ii) Seller consents to such return (such consent being, at Seller’s option, conditional on goods being returnedcarriage prepaid) and furnishes Buyer with re-delivery instructions; and

(iii) Seller shall be entitled to make such test or inspection as it thinks fit before consenting to goods beingreturned accordingly, Buyer shall preserve intact goods which it claims to return for a period of 90 days aftersuch claim is made. Failure to make such a claim shall constitute unqualified acceptance of goods and waiverby Buyer of all claims relating to defects in materials or workmanship. This undertaking shall not apply wherean attempt has been made other than by Seller to remove defect or where Seller is satisfied that goods havebeen improperly used, maintained, stored or serviced.

(4) Where goods are returned by Buyer and accepted as defective by Seller, Seller shall at its option eitherrepair or replace such goods without cost to Buyer or allow Buyer credit therefore, Buyer shall not be entitledto make any claim in respect of such goods for work done thereon, transport costs, loss of profit on resale orin sale respect of claim, loss, damage or expense whatsoever other than replacement cost thereof, nor shallBuyer be entitled to treat delivery of such defective goods as ground for repudiating contract or for cancellingfurther deliveries.

or cancel contract , also cancel other orders received from Buyer and charge interest on any overdue payment

(5) Subject only to paragraph (1) of this condition, no statement, undertaking, warranty or conditions express orimplied, statutory or otherwise, not stated in these Conditions shall apply to contract.

(6) Buyer undertakes to indemnify Seller against all claims relating to goods sold to Buyer by Seller in respectof any loss, damage or expense by any third party, howsoever caused.

(7) In relation to goods not manufactured by the Seller, provisions of this condition shall apply only where Selleris, in its own opinion, entitled to claim from supplier to it the loss, damage or expense made by Buyer fromSeller.

7. ExclusionsSave as herein before provided no undertaking, warranty or condition, express or implied, statutory orotherwise, shall apply to contract.

8. Tests and inspectionsUnless otherwise agreed any test or inspection other than or in excess of those required in Buyer’sspecification, shall be conducted at Seller ’s works and Buyer shall pay a reasonable charge therefor.

9. Patents etcIn cases where buyer provides drawings, designs, models or specifications, for the purpose of enabling theSeller to provide goods according to Buyer’s design, the Buyer shall indemnify the Seller against all actions,claims, costs, damages or losses arising from any infringement of letters patent, design, trademark orcopyright protected by law in respect of such drawings, designs, models or specifications or any goods madeor supplied by the Seller in compliance therewith.

10. BreachIf Buyer shall default in or commit any breach of any of its obligations to Seller or if any distress or executionshall be levied on any of Buyer’s property or if Buyer shall make or offer to make any arrangement orcomposition with creditors or commit any act of bankruptcy, or if Buyer is a limited company and anyresolution or petition to wind-up its business is presented or passed or a receiver appointed of such company’sundertaking, property or assets or any part thereof, then Seller shall be entitled forthwith to terminate anyorder from Buyer then subsisting and on written notice of such termination being posted by it to Buyer’s lastknown address and any and every subsisting order shall be deemed to have been terminated withoutprejudice to any claim or right which Seller might otherwise make or exercise.

11. Site WorkWhere Seller or subcontractor of Seller is involved in delivery of goods to a site, in site work, and/or permanentfixing of goods Special Extra Conditions shall apply, copies of which are obtainable on request.

12. Governing LawThese conditions and all quotations, offers and acceptances shall be construed according to English Law.

Credit Account Application

Lyte Industries (Wales) Ltd.

Wind Road, Ystradgynlais, Swansea, Powys, UK SA9 1AF

Tel: 01639 846800 Fax: 01639 841541 email: [email protected]

CertificateNo. FM25962

www.lyteladders.co.uk 4912

-L10

08

Dealer stamp

Product Catalogue - Frank Ratcliffe Roofing Centre · HD270 6.94m 12.71m 27 50.40kg HD - Two...

Documents

Transcript of Product Catalogue - Frank Ratcliffe Roofing Centre · HD270 6.94m 12.71m 27 50.40kg HD - Two...