Product Catalog - Steeler · 2014-07-31 · Product Catalog. More Corrosion Resistant ... Round...
Transcript of Product Catalog - Steeler · 2014-07-31 · Product Catalog. More Corrosion Resistant ... Round...
Roofing Metals • Roof Drainage • Metal Concrete Accessories
Ventilation • Pipe and Fittings • Drywall Metal Trims
Product Catalog
More Corrosion ResistantThe unique combination of aluminum and zinc can outlast galvanized
steel by two to four times, depending on the environment.
FormabilityEquivalent formability to conventional galvanized products allows for
a wide range of applications.
Attractive AppearanceAluminum-Zinc Coated Steel’s smooth surface is architecturally
pleasing and makes for a superior surface for pre-painting and post-
painting.
No Primer RequiredNo primer required when field painting, provided a water based acrylic
finish coat is used.
Pre-paintedAluminum-Zinc Coated Steel is available in pre-painted Award colors.
High Temperature ResistanceOperating conditions resulting in surface temperatures up to 600 de-
grees are easily withstood without surface discoloration.
Thermal ReflectivityAluminum-Zinc Coated Steel sheet reflects a high percentage of heat
and light. In roofing, it acts as a heat shield and thermal barrier.
Aluminum-Zinc Coated Steel
Aluminum-Zinc Coated Steel
coating consists of an alloy of nom-
inally 55% aluminum, 1.6% sili-
con, and the remainder zinc by
weight, as listed in ASTM desig-
nation A792.
Based on long-term atmospheric cor-
rosion test results, it is estimated that
Aluminum-Zinc Coated Steel sheet
will outlast G90 galvanized by two
to four times in marine, industrial
and rural atmospheres.
In salt spray tests with cut edges
exposed, the corrosion resistance is
typically three to four times that of
G90 Galvanized.
Metal Products For The Construction Industry
Metal Products For The Construction Industry 1
Introducing New ProductsNot all products are stocked at all of our locations, call for availability.
Visit our online catalog: www.awardmetals.com
Round Elbows by Award Metals
2” & 3” Round Elbows45°, 60°, 75°, 90°
Rolled Seam20 per box
Galvanized in 2” & 3”Bonderized in 3” only
More Elbows on Page 16
Painted Steel ProductsFor The Seamless Gutter Industry
Why Steel?• Easier to install
• Fewer warranty concerns
• Far stronger than aluminum
• Less expensive than aluminum (per foot)
Coils - Downspouts - Elbows - End Caps
12 Coil Colors• 50° White• Musket• 30° White• 80° White• Almond• Old Town Gray• Classic Cream• Pebblestone Clay• Heritage Cream• Raffia Beige• Beaver Brown• Buckskin Brown
Four Coil Widths• 19” E grade (all colors)• 15” D grade (all colors)• 13” D grade (all colors)• 11⁷⁄₈” D grade (50° White and Musket)
Metal Products For The Construction Industry
Metal Products For The Construction Industry2
◆ Designed by and for the roofing contractorMade of high impact resins to achieve both the rigorous de-
mands required for jobsite installation and the long-lasting
durability to withstand harsh weather.
◆ Matte FinishA matte finish that provides a uniform contoured surface
that resists scratches and dents while giving the finished
roof more of a blended appearance eliminating the shiny,
“blistered” effect.
◆ 50 square inches of net free air flow50 square inches of net free air for excellent air flow and op-
Hood: 12” x 12”Base: 15” x 18”
Height: 4”
COLORS:NORTHWEST BROWN,WEATHERED GRAY,
L IGHT GRAY,EMERALD ,
BLACK OR TAN
Also available in:5” High Collar - Shake or Tile
8” High Collar - Hot Mop
timum ventilation.
◆ Unique nailer stripUnique nailer strip designed for ease of installation that
dramatically reduces the risk of base fractures during fas-
tening.
◆ Ultraviolet inhibitorsMade with ultraviolet inhibitors to retain long-lasting
strength, color and durability.
◆ Double fencing
◆ Galvanized
◆ Pre-painted
◆ Award Stonecoat
◆ Copper by Special Order
◆ Aluminum Zinc Coated Steel
◆ 38 square inches of net free air flow
Regular BaseHeight: 4” Base to top of Bonnet
Flange: 42” from ThroatHood: 102” x 102”
Base: 17” x 17”Collar: 3”
Jumbo Aluminum BaseHeight: 6” Base to top of Bonnet
Flange: 83” from ThroatHood: 102” x 102”
Base: 24” x 24” Collar: 5”
True-38 Roof Vent
Attic Ventilation
Metal Products For The Construction Industry
3Metal Products For The Construction Industry
Ridge Cap Metal
� Saves You Money!
� Hurricane Tested*
� Easy To Install
STEALTH ® Ridge Vent: U.S.Patent 6,662,509 B2
Sub-flashing Metal
Available InPaint-ready aluminum zincPre-painted AWARD Colors
AWARD STONECOAT TM
Copper by Special Order
Four Widths24”, 30”, 36”, 48”
Deck Opening Sizes24” = 14” x 5” 36” = 26” x 5”
30” = 20” x 5” 48” = 38” x 5”
®
Low Profile VentICC Evaluation: ER-5463
Composition
“S” Tile
Flat Tile
Metal Ridge VentICC Evaluation: ER-6171
� Superior Protection
� Natural Ventilation
� Virtually Invisible
* Dade County Tested for Wind and Wind Driven Rain Resistance to110 M.P.H. under an 8.8 inch per hour rainstorm. MD# CAE 00048
Dade County Tested for Wind and Wind Driven Rain Re-sistance to 80 M.P.H. under an 8.8 inch per hour
rainstorm. MD# CAE 00048
Net Free Air Flow24” = 40 sq. in. 36” = 66 sq. in.
30” = 53 sq. in. 48” = 90 sq. in.
Metal Products For The Construction Industry
Metal Products For The Construction Industry4
AWARD STONECOAT
Weathered Onyx Blend of Wood Slate Rustic White EmeraldWood Brown Shake Wood
Elk Weathered Sable Wood Hickory Shake Antique Barkwood Birchwood ForestWood Wood Slate Green
GAF Weathered Charcoal Burnt Summer Slate Barkwood Birchwood ------Wood Blend Sienna Sage Blend Blend
Pabco Weathered Antique Harvest Buckskin Slate Prairie Weathered SherwoodWood Black Brown Tan Gray Wood White Green
Tamko Mountain Rustic Autumn Harvest Thunderstorm Rustic ------ ForestSlate Black Brown Gold Gray Slate Green
Owens Driftwood Onyx Brownwood Desert Estate Barnwood ------ ChateauCorning Black Tan Gray Green
Certainteed Weathered Charcoal Burnt ------ Williamsburg ------ Silver AllWood Black Sienna Gray Gray Greens
AWARD STONECOAT COLORSMANUFACTURERS
TM
SHINGLE
Award Metals has developed the unique AWARD STONECOATTM
process to eliminate the common drawback
to all standard roof vents . . . they are visually unattractive. Some are bare metal, some are bright plastic.Bare metal,
even galvanized metal, rusts long before the roofing surface needs to be replaced. A painted roof vent usually results
in a poor match to the roofing surface and will likely eventually fade or peel. By using AWARD STONECOATTM
products for your roof venting, both longevity and appearance are greatly enhanced.
TM
Bare Unfinished Metals AWARD STONECOATTM
Weathered Onyx Blends of Wood Slate Rustic White Emerald Pewter PacificWood Brown Shake Wood Blue
Weathered Wood Charcoal Black Dark Brown Wood Tone Slate Autumn Blend Artic White Yosemite
Weathered Wood Charcoal Blend Mesa Brown Cedar Blend Slate Blend Barkwood
Weathered Wood Charcoal Blend Burnt Sienna Cedar Blend Slate Blend Birchwood Blend
Weathered Wood Antique Black Harvest Brown Buckskin Tan Driftwood Prarrie Wood Weathered White Sherwood Green Pewter Gray Blue Slate
Weathered Wood Rustic Black Autumn Brown Rustic Cedar Antique Slate Rustic Slate Coastal Sand Rustic Green
Weathered Wood Sablewood Hickory Shake Wood Antique Slate Barkwood Aspen White Forest Green
Driftwood Onyx Black Brownwood Desert Tan Coastal Gray Teak Sierra Gray Chateau Green Estate Gray Harbour Blue
Weathered Wood Charcoal Black Burnt Sienna
Weathered Stone Sandpiper Windswept Gray Regatta Blue
Weathered Wood Ebony Wood Oakwood Cypress Wood Driftwood Birchwood Fernwood
Weathered Wood Charcoal Antique Brown Sienna Blend Natural Wood Silverwood Rain Forest Oxford Gray
Weathered Wood Dual Black Bark Brown Earthtone Cedar Castle Gray NW Driftwood Dual Gray Forest Green Harvard Gray Blue Slate
AWARD STONECOAT is available in other colors upon your request. Color variance may occur from
different production runs. If any manufacturer or shingle color is not represented, please let us know.
TM
CELOTEX
GAF Grand Sequoia
GAF Timberline
PABCO
TAMCO
ELK
O.C.
CERTAINTEEDIndependence
CERTAINTEEDHaiteras
CERTAINTEEDArc-80
MALARKEY
IKO
© 2007 Award Metals - Vancouver, WA
Metal Products For The Construction Industry
5Metal Products For The Construction Industry
AWARD STONECOAT TM
InexpensiveAWARD STONECOATTM is priced to save you money
and make you look goodat the same time! Impress your
customers and your accountant.
AttractiveDeveloped with the unique AWARD STONECOATTM
process to eliminate the unattractiveness of galvanized
roof vents. Available in a wide range of colorsto match
most roofing products including: Celotex, Certainteed,
Elk, GAF, Pabco, Tamko, and Ownens Corning.
Durable and Builder FriendlyAWARD STONECOATTM helps to increase the
longevity of all your roof venting needs, and eliminates
painting problems while creating a wonderful accent
color to the roof. We stand behind this durability by of-
fering a 25-year limited warranty on all AWARD
STONECOATTM products.
Ask Your Supplier For A Quote
Ask About The PriceIt’s Less Than You Think!
Metal Products For The Construction Industry
Metal Products For The Construction Industry6
Fascia Cap Fabry Crown Gravel Stop
Roofing Metals
A 2”, 3” or 4”
B 3”, 2”
C 2”, 3”, 4”
(With Stiffener)A
B C
Drip
A 2”, 22”, 3”, 4”
B 3”, 2”
C 2”, 22”, 3”, 4”A
B C
Grip
A 12”
B 2”A
B
Drip
A 1f” or 3”
B 2”
C VariableA
B C
A
B
Grip
A Variable - 1” or more
B Variable - 12” or moreA
B
NoDrip
A
B
C
A
B
Drip
A 1⁷⁄₁₆”
B 2²³⁄₃₂
C ³⁄₁₆
A
BC
A 1c”, 13”, 12”, 1e”
B Variable
C 2”
A 2”
B 6”, 8” or 10”
Drip
B B
AGrip
Gravel Stop With Drip Gravel Stop With Grip
Nosing With Grip 2-Way Edge
Eave Strip With Drip 3-Way Edge
D-Metal Coping - Drip, Grip or Plain
A Variable - 1” or more
B Variable - 12” or more
A Variable - 1” or more
B Variable - 12” or more
B
APlain
Metal Products For The Construction Industry
A 2”
B 22”
C - 2”
A 4”
B 14” or 20”
Z-Bar - Standard Sizes
Brick Flashing
Roofing Metals
2
1
3
A CB
21
32
A
B
AB
110o
7Metal Products For The Construction Industry
Saddle Stock 90o Saddle Stock 110o
Tucker Flashing
Counter Flashing Type A
A 2”
B 2”
C 2”
D 32”
A 2”
B 42”
A 1:”
B e”
C :”
A 2”
B 2”
C 6”
T-Metal
Counter Flashing Type B
AB
C
D
A
B
AB
C
Z-Bar - Standard Sizes
A 4”
B 14” or 20”
A 2”
B 1”
C 3”
A 2”
B 1”
C 2”
A
BC
Eave Riser Strip
AB
B
C
A 3”
B 2”
C 2”
Metal Products For The Construction Industry
Metal Products For The Construction Industry8
Roofing Metals
Roof To Wall Head Flashing Tile Riser
Termite Flashing Vertical Flashing
Diatto - Regular
A
BC A
BC
AB
A
BC
B
A 4” or 6”
B 6”, 7”, or 8”
C 1”
A 2”
B 22”
C 3”
A 2”, 3”, 4”
B 4” or 6”
Variable Pitch
A f” or 12”
B Variable
4:12 Pitch
A 1”
B 1”
C 1”
A
B
A 32”
B 4”, 6”, 8”
C - 2”
A 32” - 4”
B 4”, 6” or 8”
C 2” or :”
A 4”
B 6”
C 2” or :”
Tile Pan Tile Pan U-Channel
Tile Pan Ribbed - One Rib
A
B
C
A
B
C
A
B
C
A
B
C
A 5”
B 8”
C 2” or :”
Tile Pan Ribbed - Two Rib
Diatto - Leg
A
BC
B
D
A 2”
B f”
C 2”
D - 2”
Metal Products For The Construction Industry
9Metal Products For The Construction Industry
Pipe Flashing - Dead Soft Base
Roofing Metals
A
BC
2” to 4”Dead Soft Aluminum Base
Dead Soft Copper Base
Dead Soft Base
1100 - 0 Temper
AC B
A 22”
B 23”
C 2”
A 13”
B 2”
C 2”
A 42”
B 5” or 63”
Flat to 12:12 Pitch
Pipe Flashing - Standard Base
2” - 4”
Aluminum Zinc Coated,
Galvanized or Copper
Pipe Flashing - FHA Base
2” to 7”Aluminum Zinc Coated
Steel, Galvanized or Copper
FHA Approved“Wide Base”
Water Table Rake Trim Metal
Lap Joint
Eave Starter #230 Anti Ponding Metal
AB
CA
B
A 1c”, 12” or 2”
B d”
C Variable
A 3”
B 1”
C 3”
A 12” or 2”
B 6”, 8” or 10”
Rain Diverter
Aluminum Pipe Flashing
1½” or 2” Pipe DiameterFlat Base Only
Aluminum Base Only
Special Order ProductA
B.75" 1"1.5"
3"
Metal Products For The Construction Industry
Metal Products For The Construction Industry10
Roofing Metals
* Metal width prior to forming
4 Rib Valley
2 Rib Open Valley
1 Rib “W” Valley 1 Rib Tile Valley
3 Rib Valley
5 Rib Valley - Cedar Lite
With or WithoutClosed Hem or
Open Hem
18” or 24”1” Rise
Aluminum Zinc Coatedor Galvanized *
Copper by Special Order
24”1” Rise
Aluminum Zinc Coatedor Galvanized *
Copper by Special Order
24”1” Rise
4” Between RiseAluminum Zinc Coated
or Galvanized *Copper by Special Order
24” Aluminum Zinc Coated
or Galvanized *Copper by Special Order
3/4” Open Hem
With or WithoutClosed Hem or
Open Hem
With or WithoutClosed Hem or
Open Hem
With or WithoutClosed Hem or
Open Hem
24” Aluminum Zinc Coated
or Galvanized *Copper by Special Order
Multiflex - Shake base
Multiflex - Dead Soft Base
Dead Soft Base
1100 - 0 Temper
12” - 2”Deadsoft Aluminum Base
For Tile Applications
5:12 maximum
5:12 maximum
12” - 2”
Aluminum Zinc Coated,
Galvanized or Copper
Multiflex - Regular Base High Boot
5:12 maximum
12” - 2”
Aluminum Zinc Coated,
Galvanized or Copper
5:12 maximum
Multiflex - Regular Base
12” - 2”
Aluminum Zinc Coated,
Galvanized or Copper
With or WithoutClosed Hem or
Open Hem
24” or 28³�₄”Aluminum Zinc Coated
or Galvanized *Copper by Special Order
31” Tall Rib (Not Pictured)
Metal Products For The Construction Industry
11Metal Products For The Construction Industry
Zinc Moss Roof Strip
Roofing Metals
6” x 50’7” x 50’8” x 50’
12” x 50’14” x 50’20” x 50’Pre-Painted, Galvanized
or Aluminum
Zinc Moss Roof Strip is the long termsolution to moss build-up on roofs. Witheach rainfall, moss killing zinc is re-leased. Zinc is a proven agent for con-trolling moss and fungus. Just apply therolled zinc to each side of the ridge capalong all roof peaks. Works on compo-sition or shake roofs and is designed tolast more than 25 years! Stocked atVancouver & Seattle Facilities.
3” x 5” x 7”3” x 5” x 8”4” x 6” x 14” 4” x 4” x 8”4” x 4” x 12”4” x 4” x 14” Galvanized & Pre-Painted
50 per Bundle
Bird Stop Eave Closure
Roof Outlet
Major Styles Available Weep & Nail Holes Provided
Charcoal, Terra Cottaor Bare Metal
2” Round With 5” Long Tube2” Round With 10” Long Tube
GalvanizedCall for other sizes.
5” - 50 per Box10” - 25 per Box
Roll Valley
Step ShinglesShingles
5” x 7” - 100/Bundle6” x 8” - 100/Bundle 8” x 12” - 50/Bundle
10” x 14” - 50/Bundle
Galvanized & Pre-Painted
Gerard “W” Valley
Contact us for moreinformation on the
Zinc Moss Roof Strip.
7” 1” Rise
Bonderized
Metal Products For The Construction Industry
Metal Products For The Construction Industry12
Roof Drainage
Fascia Deco Face - 5 & 7 Rib Tile Deco Face - 7 Rib
Fascia Plain Face Tile Plain Face
Fascia Curved Face - 1” Wing Half Round Single Bead
“K” Style - No Wing Half Round Single Bead - 1” Wing
“K” Style - 1” Wing Half Round Double Bead
73” Galvanized
or BonderizedCopper by Special Order
73” Galvanized
or Bonderized
4”, 5”, or 6” Galvanized, Bonderized,
or Copper
53” or 73” Galvanized
or BonderizedCopper by Special Order
53” or 73” Galvanized
or Bonderized
53” Standard73” Standard or Tile
Galvanizedor Bonderized
Copper by Special Order
4”, 5”, or 6” Galvanized,Bonderized,or Copper
4”, 5”, or 6” Galvanized,Bonderized,or Copper
Copper 10’ Length Only
Copper 10’ Length Only
4” & 6” Copper 10’ Only5K Copper 10’ or 20’4” NA in Bonderized
4” & 6” Copper 10’ Only5K & 6K Copper 10’ or 20’
10’ in 4”, 5” & 6”20’ in 5” & 6”
10’, 20’, 25’, or 30’6” NA in Galvanized
10’ in 4”, 5” & 6”20’ in 5” & 6”
10’ in 4”, 5” & 6”20’ in 5” & 6”
4”, 5”, or 6” Galvanized, Bonderized,
or Copper
4”, 5”, or 6” Galvanized, Bonderized,
or Copper
Metal Products For The Construction Industry
13Metal Products For The Construction Industry
Half Round Drop Outlets Tapered Drop Outlets
Miter - Half Round Miter - “K” Style
Oval Drop Outlets Rectangular Drop Outlets
Fascia Tap On End Cap Curved Fascia End Cap
Half Round Tap On End Cap “K” Style Tap On End Cap
Roof Drainage
5”, or 6” Galvanized
5” or 6” Copper
2”Galvanizedor Copper
1:” x 2:”2” x 3”, 3” x 4”
Copper 2” x 3” Only
53”Galvanizedor Copper
4”, 5”, or 6” Galvanizedor Copper
4”, 5”, or 6” Galvanizedor Copper
3” or 4” Galvanizedor Copper
3” or 4” Galvanizedor Copper
53” or 73” Gal-vanized
or Copper
4”, 5”, or 6” Galvanizedor Copper
Metal Products For The Construction Industry
Metal Products For The Construction Industry14
Square Pipe Straps Round Pipe Straps
Roof Drainage
Ferrules Spikes
Leader Heads Outlet Box - Scupper
Round Downspout - 10’ Square Downspout - 10’ & 20’
50º White Pre-Painted Downspout Musket Brown Pre-Painted Downspout
7” or 8” Gal-vanized
or Copper
2” thru 4”Galvanizedor Copper
2” x 3”3” x 4”4” x 6”
10” Tube
1:” x 2:”2” x 3”, 3” x 4”, 4” x 6”
26gaGalvanized or Bonderized
4”, 5”, or 6” Galvanizedor Copper
1:” x 2:”2” x 3”3” x 4”4” x 6”
Regular1:” x 2:”
2” x 3”3” x 4”4” x 6”
2” thru 6” 26 GA Galvanizedor 16 oz Copper
100 per Box
Galvanized or Copper
Left, Center, Right
Pre-painted Pipe Straps1:” x 2:”
Regular OrnateGalvanized or Copper
16 oz Copper - 2” x 3” or 3” x 4”
4” x 6” Special
Copper 100 per BoxGalvanized 926 per Box
PACKAGED TO
ELIMINATE
SCRATCHING !
28ga or 26ga 28ga
Ornate3”, 4”, 5”, 6”Round with
Male ExtensionSpecial Order
Metal Products For The Construction Industry
15Metal Products For The Construction Industry
Roof Drainage
Tile Hanger Hook Hanger
Nail Type Fascia Hanger Spike Type Fascia Hanger
Hidden Hanger
4”, 4¹⁄₂”, 5”, 6”Galvanized
4” or 4¹⁄₂”Galvanizedor Copper
4” or 4¹⁄₂”Galvanized
5”Galvanized
4”Galvanized
“K” Style Hanger
5” or 6” Galvanized or Copper
Metal Products For The Construction Industry
Metal Products For The Construction Industry16
Roof Drainage
Double
Single
Half Round Slip Connector
Wire Strainer Round Elbows
2”, 3”, or 4”Galvanizedor Copper
2” or 3”Rolled Seam20 per Box
Galvanized in 2” & 3”Bonderized in 3”
Copper and other sizes bySpecial Order
5” Galvanizedor Copper
4”, 5”, or 6” Galvanizedor Copper
50 per Box
50 per Box20 per Box
Square Elbows - Style “B”“K” Style Slip Connector
20 per Box
1:” x 2:”2” x 3”3” x 4”
Galvanized 28gaRolled Seam Non-Mitered
45o, 60o, 75o, 90o
#10 Circle & Shank Hanger Half Round Strap Hanger
Nail Type Half Round Crossbar
4”, 5”, or 6” Galvanized or Copper
Single Bead
5” or 6”Galvanizedor Copper
4”, 5”, or 6” Galvanizedor Copper
50 per Box
4” thru 6”Galvanizedor Copper
Imperial Hanger
20 per Box
1:” x 2:”2” x 3”3” x 4”
Galvanized 28gaRolled Seam Non-Mitered
45o, 60o, 75o, 90o
Square Elbows - Style “A”
Metal Products For The Construction Industry
17Metal Products For The Construction Industry
Gutter Profiles
4” or 4¹⁄₂”4” or 4¹⁄₂”
5¹⁄₂”or
7¹⁄₄”5¹⁄₂”
7¹⁄₄”
2¹⁄₄” 2¹⁄₄” 2¹⁄₄”
5¹⁄₄”or
7¹⁄₄”5¹⁄₂”or
7¹⁄₄”
5¹⁄₄”or
7¹⁄₄”
¹⁄₂”¹⁄₂”
1¹⁄₂”³⁄₈”
³⁄₄”85°
5° ³⁄₁₆”5° ³⁄₁₆”
1”1”
Tile Fascia - Plain or Deco Plain Fascia or Deco Curved Fascia
4” - 5” - 6” Half Round Single Bead 4” - 5” - 6” Half Round Double Bead
4” - 5” - 6” “K” Style
Metal Products For The Construction Industry
Metal Products For The Construction Industry18
Ventilation Products
22” Cap10” High6” Flange26 Gauge12” x 12” Opening133.00
sq. inches net free air28.47 and 50.19
sq. inches net free air
28.47 and 50.19sq. inches net free air
Sub-flashingRidge Cap
13” x 19”“S” Tile,
Flat Tile orComposition
68.00sq. inches net free air
9” x 18”Regular, Deadsoft Alu-
minum or Copper
12” x 24”Regular, Tile, DeadsoftAluminum or Copper
See page 3 for more specifications.
Net Free Air Flow24” = 40 sq. in. 36” = 66 sq. in.
30” = 53 sq. in. 48” = 90 sq. in.
See page 3 for more specifications.
STEALTH ® Ridge Vent: U.S.Patent 6,662,509 B2
ICC Evaluation: ER-6171Dade County Tested for Wind and Wind DrivenRain Resistance to 110 M.P.H. under an 8.8 inch
per hour rainstorm. MD# CAE 00048
Gravity Vent Half Round Dormer
STEALTH ®Metal Ridge Vent STEALTH ® Low Profile Vent
Pentagon Dormer Half Round Dormer - Pointed Back
High Impact Resins
Hood: 12” x 12”
Base: 15” x 18”
Height: 4” 38 sq. inches net free airSee Page 2
50 sq. inches net free airSee Page 2
Hood: 102” x 102”
Base: 17” x 17”
Height: 4”
Nifty-fifty True 38
ICC Evaluation: ER-5463Four Widths
24”, 30”, 36” 48”Aluminum-Zinc coated steel,
Pre-painted, copper or Award STONECOAT
STEALTH ® Sub-base flashing Page 21
9” x 18”Regular, Deadsoft Alu-
minum or Copper
12” x 24”Regular, Tile, DeadsoftAluminum or Copper
19Metal Products For The Construction Industry
Metal Products For The Construction Industry
Ventilation Products
Vent Cap China Cap
Round Aluminum Code Cap Oval Aluminum Code Cap
Rectangular Gable End Vent Round Gable End Vent
Foundation Vents Eave Vent
Stamped FoundationLouver Vent
14” or Larger2” Flange
F.O.F., F.O.B., P.G.
6” x 14”Bonderized
Plaster Ground
14” x 8”14” x 12”14” x 18” 14” x 24”
6” x 14”Bonderized
Plaster Ground
6” x 14”Galvanized
Plaster Ground
4” Horizontal or VerticalICBO RPT. 3728
CLIS AA-513
3” to 10” RoundICBO RPT. 3728
CLIS AA-513
Regular, Shake Baseor Tile Hem
Deadsoft Base up to 8"
3”, 4”, 5”,6”, 7”, 8”
4” Oval Cap By Spe-cial Order
4” to 24”Galvanized
F.O.F., F.O.B., P.G.
8” x 16” Poured-in-place foundationvent, with or without doors.
For wall sizes:6”, 8”, 10” or 12”
Gray Plastic
See your Local Building Codefor installation requirements.
Ready-Vent ®
U.S. Patent#6,165,066
Stamped Foundation1/4” Mesh Vent
Foundation Vent1/4” Screen
3-1/2" x 14" Ear Out3-1/2" x 22" Ear Out
5" x 22" Ear Out1/4” Screen
Regular, Shake Baseor Tile Hem
Deadsoft Base up to 8"
China CapType A
China CapType B
Metal Products For The Construction Industry
Metal Products For The Construction Industry20
Ventilation Products
3”- 4” 5”- 6” 7”- 8”10”, 12”
Regular, Shake Baseor Tile Hem
Adjustable Pitch
Sub-Base Flashing Available
4” or 7” RoundDead Soft Aluminum
Dead Soft Copper
4” x 10” 4” x 12” 4” x 14”
1” to 2”3” to 4”
Galvanized
4”, 6”, 8”Aluminum Zinc Coated
Regular BaseFlat or Pitched 4/12, 5/15, 6/12
4” & 7” Round
6” x 6” Square
4” x 10” 4” x 12” 4” x 14”
Open End or with End Caps
Aluminum Zinc Coated, Galva-
nized or Copper
Regular, Shake Base or Tile Hem
Regular or Shake Base Regular or Shake Base
8” to 48”Galvanized
Special Order
Base Made To Pitch
Roof Jack Roof Jack - 2 Piece
T-Top T-Top - Deadsoft Aluminum Base
Horizontal Combo Vent Vertical Combo Vent
Rotary Vent & Base Snow Splitter Vent
4” x 19”Aluminum Zinc Coated,
Regular, Shake Base,Galvanized or
Aluminum Base
Sub-Base Flashing Page 21
48.75 sq. inchesnet free air
48.75 sq. inchesnet free air
Eyebrow Dormer - Gerard Hem Eyebrow Dormer
4” x 19”Aluminum Zinc Coated,
Regular, Shake Base,Galvanized or
Aluminum Base
Sub-Base Flashing Page 21
21Metal Products For The Construction Industry
Metal Products For The Construction Industry
Ventilation Products
4” or 5” Dryer VentGalvanized2” Flange
Copper by Special Order
4” to 5”Attached PlasticBathroom Vent With Flapper
4” or 7” Wall Cap WithScreen
2” FlangeCopper by Special Order
14” x 14”Piano or Strap Hinge
2”, :” or f”Plaster Ground
Galvanized
Square Sub-Base Flashing
9" x 18" - Opening 10" x 10"
12" x 24" - Opening 14" x 14"
Round Sub-Base Flashing
17-1/2" x 17-1/2"
Openings: 3"- 4", 5"- 6", 7"- 8"
RECOUPS UP TO5 SQ. FT. OF SPACE.
Eliminates kinks in connection
which reduces electrical/gas
costs from improper venting
and potential fire hazard from
lint buildup.Durable High Impact
Polystyrene
Tub Access Door Roof Mounted Dryer Vent
Wall Cap
Sub-Base Flashings Stem Vent - ABS Plastic
Wall Mount Dryer Vent
STEALTH ® & Eyebrow Sub-Base Flashing
3” to 6”Fixed or Adjustable
Galvanized
Storm Collar
For the STEALTH ® Vent24”, 30”, 36” or 48”
For 4” x 19”Eyebrow Dormer
DBX1000 Dryer Vent Receptacle
4” x 6”
6” x 9”
8” x 8”
14” x 14”
14” x 29”
Access Able ® Access Panel
4" or 5" Round Dryer Vent
with Flapper
Available in Copper
Metal Products For The Construction Industry
Metal Products For The Construction Industry22
Bare Metal Drywall Trims
Open Angle Corner Bead L-Bead
1¹⁄₄” Corner Bead
3/4” Bullnose Corner Bead U-Bead
Bullnose Open Angle J-Bead
Award Bullnose Corner Beadpro-vides the soft look of rounded inte-rior corners. The ³�₄” radius is thepopular choice of architects andbuilders. It can be nail, screw or sta-ple applied.
Award J-Bead J-Bead provides afinished edge at wallboard stops andcan be used where wallboard panelsintersect or abut dissimilar surfaces.Joint compound can not be usedwith J-Bead as the hemmed surfaceis generally painted. J-Bead is avail-able in both ¹�₂” and ⁵�₈” sizes.
Length/Ft Pcs/Ctn Ft/Ctn8’ 50 400’
10’ 50 500’
30 Cartons Per Skid
Length/Ft Pcs/Ctn Ft/Ctn7’ 57 400’8’ 50 400’9” 45 400’10’ 40 400’12’ 34 400
Award Open Angle BullnoseCorner Bead allows the softlook to continue on wall anglesgreater that 135o .
Length/Ft Pcs/Ctn Ft/Ctn7’ 57 400’8’ 50 400’9’ 45 400’
10’ 40 400’12’ 34 400
A B³�₄ ³�₄
Award U-Bead provides a smooth,square, finished edge for wallboardstops around door and window open-ings. Joint compound is required tofinish. Back flange allows for tight fitagainst wood or steel stud. Availablein both ¹�₂” and ⁵�₈” sizes.
Award L-Bead is used for wallboardstops where speed and economy areimportant. Joint compound is requiredto finish. Available in both ¹�₂” and⁵�₈” sizes.
Length/Ft Pcs/Ctn Ft/Ctn6’ 100 600’7’ 86 600’8’ 75 600’9’ 67 600’
10’ 60 600’12’ 50 600’
48 Cartons Per Skid
Award Open Angle Corner Beadprovides a straight, smooth finishfor interior wall angles greater than135o.
Award Drywall Corner Beadspecial coating insures the bestcompound bonding and corrosionresistance. It provides lasting pro-tection to exposed interior edgesof wallboard and smooth,straight corners. It can benailed, screwed or clinched ontowallboard.
A B1¹⁄₄ 1¹⁄₄
Length/Ft Pcs/Ctn Ft/Ctn8’ 63 504’9’ 56 504’
10’ 50 500’
40 Cartons Per Skid
Length/Ft Pcs/Ctn Ft/Ctn8’ 75 600’
10’ 60 600’
48 Cartons Per Skid
Length/Ft Pcs/Ctn Ft/Ctn8’ 50 400’
10’ 50 500’
30 Cartons Per Skid
A B C¹�₂ ¹�₂ 1¹⁄₁₆
⁵�₈ ⁷�₁₆ ¹⁵�₁₆
A B1¹⁄₄ 1¹⁄₄
A B¹�₂ 1
⁵�₈ 1
A B³�₄ ³�₄
A B C¹�₂ ¹�₂ 1¹⁄₁₆
⁵�₈ ⁷�₁₆ ¹⁵�₁₆
Other sizes available by special order.
Other sizes available by special order.
32 Cartons Per Skid
Metal Products For The Construction Industry
23Metal Products For The Construction Industry
Bare Metal Drywall Trims
Award Resilient Furring Channelpermits exceptional control of soundtransmission through ceilings andpartition wall assemblies. It is screwattached to wood or steel framing24” or 16” O.C. Wallboard is screwattached to the 1¼” knurled flangeand kept from direct contact withframing members.
Award Drywall Furring Channel(Hat Channel) features the higher⁷�₈” leg and 1¹�₄” knurled screw sur-face for easy screw attachment ofwallboard on wall and ceiling furring:⁷�₈” x 1¹�₄” x 12’.
Length/Ft Pcs/Ctn Ft/Ctn10’ 10 100’12’ 10 120’
75 Bundles Per Skid
Length/Ft Pcs/Ctn Ft/Ctn12’ 20 240’
50 Bundles Per Skid
A B1¹�₄ ⁷�₈
A B C1¹�₄ ¹�₂ ⁷�₁₆
Award Construction L is for use inlight gauge framing wherever 90o
metal angles are required.
Length/Ft Pcs/Ctn Ft/Ctn10’ 20 200’
Award ³⁄₄” Bullnose Kerf isdesigned for use with manypre-formed door and windowjambs to provide a smoothrounded encasement.
Construction L
Cornerbead, J-Bead, U-Bead and L-Beadproduced by Award Metals are manufactured
from aluminum-zinc coated steel that is further coated for additional corrosion resistance and
joint compound adhesion. Our products meet the ASTM specifications for hot-dipped gal-
vanized contained in ASTM Specification C-1047-94 except for Section 4.1 (ASTM C-
1047 is the specification for accessories for gypsum wallboard).
Bullnose Cornerbeadproduced by Award Metals is manufactured from aluminum-zinc
coated steel that is further coated for additional corrosion resistance and joint compound ad-
hesion. Our product meets the ASTM specification for hot-dipped galvanized contained in
ASTM Specification C-1047-94. (ASTM C-1047 is the specification for accessories for
gypsum wallboard).
A B1¹⁄₂ 1¹�₂
Drywall Furring Channel Resilient Furring Channel
³⁄₄” Bullnose Kerf
A³�₄
Length/Ft Pcs/Ctn Ft/Ctn8’ 50 400’9’ 45 405’
10’ 40 400’
32 Cartons Per Skid
Metal Products For The Construction Industry24
Tape-On & Paperfaced Nail-On Trims
Tape-On 135o Outside Open Angle
Tape-On 135o outside cornersOpen Angle bead to give a trueoffset corner.
A B C D²³⁄₃₂ ¹⁵⁄₃₂ ⁵�₈ ⁵�₈
Stock Lengths: 8’, 9’, 10’Custom lengths available upon request.
Tape-On Corner Bead for use on 90o Outside CornersA B C D
A1W ¹³�₁₆ ⁹�₁₆ ³⁄₄ ³⁄₄A1W NB ¹³�₁₆ ⁹�₁₆ ³⁄₄ ³⁄₄A1W EL ¹¹�₁₆ ¹¹�₁₆ ³⁄₄ ³⁄₄T1W EL ¹¹�₁₆ ¹¹�₁₆ ³⁄₄ ³⁄₄A1W EL NB ¹¹�₁₆ ¹¹�₁₆ ³⁄₄ ³⁄₄A1XW ¹⁵�₁₆ ¹¹�₁₆ ⁵�₈ ⁵�₈ A1XW EL ¹³�₁₆ ¹³�₁₆ ⁵�₈ ⁵�₈T1XW EL ¹³�₁₆ ¹³�₁₆ ⁵�₈ ⁵�₈A1XW NB ¹⁵�₁₆ ¹¹�₁₆ ⁵�₈ ⁵�₈ A1XW EL NB ¹³�₁₆ ¹³�₁₆ ⁵�₈ ⁵�₈
A1W, A1W NB,
A1XW, A1XW NB,
A1XW EL, A1XW EL NB
Taper’s Bead TM
T1W EL, T1XW EL
Beaded
Even Leg No Bead
No Bead
Even Leg Beaded
A B C
A4 ³⁄₈ ³⁄₈ ⁷⁄₈ 1A4 ¹⁄₂ ¹⁄₂ ¹⁵�₁₆ 1⁵⁄₁₆A4 ⁵�₈ ⁵�₈ ¹³⁄₁₆ 1⁵⁄₁₆A4 ³⁄₄ ³⁄₄ ¹⁵�₁₆ ¹⁵�₁₆A4 1 1 ¹⁵�₁₆ 1⁵⁄₁₆A4 1¹⁄₈ 1¹⁄₈ 1¹⁄₁₆ 1¹⁄₁₆A4 1¹�₄ 1¹�₄ ¹⁵�₁₆ 1¹⁄₁₆
Tape-On Inside Corner Bead
Designed to provide a straightinside corner.
A B C D³�₈ ³�₈ ⁵�₈ ⁵�₈ Stock Lengths: 8’ & 10’
Custom lengths available upon request.
A2
Tape-On 135o Open Angle
Product is designed for 135o
open angle inside corners.
A B C D⁵�₈ ⁵�₈ ⁵�₈ ⁵�₈
Stock Lengths: 8’, 9’ & 10’Custom lengths available upon request.
A2OA
Tape-On “L” Trim Corner Bead for use on 90o Outside Corners
A4
Mini-BeadTM Tape-On Outside Corner
A1MB
Tape-On outside corner designedwith 1" legs to cover damagededges and lower bead height thatrequires less fill.
A B C D¹⁵�₁₆ ¹⁵�₁₆ ³⁄₄ ³⁄₄Stock Lengths: 8’ & 10’
Custom lengths available upon request.
A1OA
Stock Lengths: 8’, 9’, 10’Custom lengths available upon request.
A B C
A4 ³⁄₈ NB ³⁄₈ ⁷⁄₈ 1A4¹⁄₂ NB ¹⁄₂ ¹⁵�₁₆ 1⁵⁄₁₆A4 ⁵�₈ NB ⁵�₈ ¹³⁄₁₆ 1⁵⁄₁₆A4 ³⁄₄ NB ³⁄₄ ¹⁵�₁₆ ¹⁵�₁₆A4 1 NB 1 ¹⁵�₁₆ 1⁵⁄₁₆A4 1¹⁄₈ NB 1¹⁄₈ 1¹⁄₁₆ 1¹⁄₁₆A4 1¹�₄ NB 1¹�₄ ¹⁵�₁₆ 1¹⁄₁₆
Stock Lengths: 8’, 9’ & 10’Custom lengths available upon request.
Award Metals tape-on and paperfaced trims are produced to meet or exceed specifications set forth in ASTM C-1047.
Metal Products For The Construction Industry
25Metal Products For The Construction Industry
Tape-On & Paperfaced Nail-On Trims
All products packaged 50 pieces per carton, 60 cartons per pallet except:A9 - 25 pieces per carton, 54 cartons per pallet. ABN NOA - 25 pieces per carton, 60 cartons per pallet. ABN NXW - 50 pieces per carton, 54 cartons per pallet.
Tape-On U and J-Trim Outside Corner
ART 1/2” ART 5/8”
AST 1/2” AST 5/8”
Tape-On U and J Trim Providesa finished edge at wallboardstops. Can be used to finishcloset drops as well as door win-dow encasements.
A B C D1/2 ⁹⁄₁₆ ¹⁄₂ ⁵�₈ 1¹⁄₁₆5/8 ²¹⁄₃₂ ¹⁄₂ ¹⁷⁄₃₂ 1¹⁄₁₆
Stock Lengths: 7’, 8’, 10’ Custom lengths available upon request.
A9 1/2” A9 5/8”
ABN OA
Product is designed for 135o
open angle 3/4” radius out-side corners.
Nail-On Bullnose 3/4” For 135o
Tape-On Bullnose 3/4” For 135o
Nail-On paperfaced bullnose3/4” for 135o open angle OutsideCorner. Nail-on version of bull-nose designed for 135o open angle3/4” radius outside corners.
A B C³⁄₄ 1¹⁄₁₆ 1¹⁄₁₆
Stock Lengths: 8’ & 10Custom lengths available upon request.
ABN NOA
Nail-On Paperfaced J-Round
Nail-On version of J-Round isideal for ceating rounded edgesat door and window (cased)openings.
A B C1/2 ³⁄₄ ⁵�₈ ¹⁄₂5/8 ³⁄₄ ⁵�₈ ⁵�₈
Stock Lengths: 8’, 9’ & 10’Custom lengths available upon request.
AJR 1/2” AJR 5/8”
Nail-On paperfaced bullnose3/4” Outside Corner. Nail-on ver-sion of bullnose designed to pro-vide an attractive 3/4” radiusoutside corner.
A B C³⁄₄ ⁵�₈ ⁵�₈
Stock Lengths: 7, 8’, 9’ & 10’Custom lengths available upon request.
ABN N ABN NXW
Nail-On Bullnose 3/4” Radius
Tape-On Bullnose 3/4” Radius
Bullnose is designed to providean attractive 3/4” radius outsidecorner. The 3/4” radius Bullnosecan be applied to all standard dry-wall sizes.
A B C³⁄₄ ⁵�₈ ⁵�₈
Stock Lengths: 7, 8’, 9’ & 10’Custom lengths available upon request.
ABN
Tape-On Reveal Trim Outside Corner
A B C³⁄₄ ³⁄₄ ³⁄₄
Stock Lengths: 8’, 9’ & 10’Custom lengths available upon request.
Tape-on no bead reveal trim fea-tures an additional paper flangethat eliminates the need forcaulking.
A B C D1/2 ¹⁄₂ ¹⁄₂ ¹⁵�₁₆ ²⁵⁄₃₂5/8 ⁵�₈ ⁵�₈ ¹⁵�₁₆ ²¹⁄₃₂
Standard Lengths: 8’, 10’ Custom lengths available upon request.
Tape-On Shadow trim (Reveal)designed to be used where wall-board abuts suspended ceilings.
A B C D1/2 ¹⁄₂ ¹⁄₂ ¹⁵�₁₆ 1⁵⁄₁₆5/8 ⁵�₈ ⁵�₈ ¹⁵�₁₆ 1¹⁄₁₆
Standard Lengths: 8’, 10Custom lengths available upon request.
Tape-On Shadow Trim Outside Corner
Metal Products For The Construction Industry
26 Metal Products For The Construction Industry
Tape-On 90o Extra Extra WideOutside Corner
Nail-On 90o Extra Extra WideOutside Corner
Mini Bull TM
Tape-On 1/2” Radius BullnoseMini Bull TM
Nail-On 1/2” Radius Bullnose
Metal Products For The Construction IndustryTape-On & Nail-On Paperfaced Trims
Award Metals SUN LINETM trims are produced to meet ASTM C-1047 except for Section 4.1.
Tape-on 3/4” radius bullnose de-signed to provide an attractive ra-dius outside corner.
A B C³⁄₄ ⁵�₈ ⁵�₈
Stock Lengths: 8’, 9’, 10’
Nail-On 3/4” radius bullnose de-signed to provide an attractiveradius outside corner.
A B C³⁄₄ ⁵�₈ ⁵�₈
Stock Lengths: 8’, 9’, 10’
Nail-On Paperfaced 3/4” radius bull-nose with extra long legs designed toprovide an attractive outside corner.
A B C³⁄₄ ⁷⁄₈ ⁷⁄₈
Stock Lengths: 8’, 9’, 10’
Tape-On 1/2" radiusbullnose outside corner.
A B C¹⁄₂ ⁵�₈ ⁵�₈
Stock Lengths: 8’, 9’, 10’
Nail-On Paperfaced 1/2" radiusbullnose outside corner.
A B C¹⁄₂ ³⁄₄ ³⁄₄
Stock Lengths: 8’, 9’, 10’
Tape-On 3/4” Radius Bullnose Nail-On 3/4” Radius Bullnose
Nail-On 3/4” Radius Extra Wide Bullnose
Tape-On 90o Extra WideOutside Corner
Tape-On 90o outside corner beadwith 1-1/16” extra wide legs.
A B C D1¹⁄₁₆ 1¹⁄₁₆ ⁵�₈ ⁵�₈
Stock Lengths: 8’, 9’, 10’
SMBN
SBN N
SBN NXW
SBN
Tape-on 90o outside corner with 1-1/4” extra extra wide legs de-signed to cover damaged edges ofwallboard and problem corners.
A B C D1¹⁄₄ 1¹⁄₄ ³⁄₄ ³⁄₄
Stock Lengths: 8’, 9’, 10’
Nail-on 90o outside corner with1-1/4” extra extra wide legs de-signed to cover damaged edgesof wallboard and problem cor-ners.
A B1¹⁄₄ 1¹⁄₄
Stock Lengths: 8’, 9’, 10’
S1XXW
S1XW
S1XXWN
SMB
27Metal Products For The Construction Industry
Stucco Metals
J-8 Drip Mold Metal J-33 One Coat Screed
#34 Stucco Stop - No Holes #36 Stucco Stop - With Holes
#7 Sill Screed #66 Casing Bead
Award #34L Stucco Stop isgenerally used for exterior 3coat stucco wall applications.Manufactured with a full 3½”wall flange to meet currentcodes. The wall flange also has2 stiffeners that can be used toalign stucco stop for 13/16” or5/16” coverage at the mud sill.Available in 7/8” ground only.
Award #36L Stucco Stop isgenerally used for exterior 3coat stucco wall applications.Manufactured with a full 32”wall flange to meet currentcodes. The wall flange also has2 stiffeners that can be used toalign stucco stop for 13/16” or5/16” coverage at the mud sill.Available in f” ground only.Available with weep holes.
Award #7 Sill Screedis gen-erally used for exterior 3 coatstucco wall applications.Manufactured in 4”, 5” and52” dimensions. Availablewith or without weep holes.
Available in Copper
Award J-8 Drip MoldMetal is generally used asplaster or stucco stop at themud sill. Manufactured with3½” wall flange to meet currentcodes.The f” base is avail-able with or without weepholes.
Award J-33 One Coat Screedis generally used with foamboard for one coat stucco ap-plications. Manufacturedwitha full 32” wall flange to meetcurrent codes. The 1d” base isavailable with or without weepholes.
Award #66 Casing Beadis for the use on windowand door frames.
10’ LengthsPackaged 300’ Per Carton
3/4” or 7/8”
10’ LengthsPackaged 100’ Per Bundle
Metal Products For The Construction Industry
10’ LengthsPackaged 100’ Per Bundle
10’ LengthsPackaged 100’ Per Bundle
10’ LengthsPackaged 100’ Per Bundle
10’ LengthsPackaged 100’ Per Bundle
Metal Products For The Construction Industry
Metal Products For The Construction Industry28
Cost Savings:The RAP-I-FORM® system costsa fraction of other concrete forming systems. Plus,you’ll also save time on setting and stripping ourforms. You’ll be using the most cost effective sys-tem on the market.
Versatility: You can use the RAP-I-FORM® systemto form anything from slab on-grade foundations tocomplete basements, and all without purchasing extrahardware.
Flexibility: The RAP-I-FORM® system can beused with 1c” HDO plywood, 3/4” HDO plywood,or regular dimension lumber.Hardware is readilyavailable for all three types of forming materials.Change your elevations, wall heights and wallthicknesses quickly and easily.
Simplicity: You and your crew won’t need ex-tensive training to use the RAP-I-FORM® sys-tem. Most contractors can learn to use thesystem in less than a day.
Availability: The RAP-I-FORM® has an exten-sive dealer network throughout the UnitedStates. For a dealer near you, please call one ofour offices.
Accuracy: The RAP-I-FORM® clips and FlatSnaptie Ties are fabricated to exact wall sizes. Thisensures you of a consistent wall size throughout thepour.
Durability: Most HDO plywood panels, whenused with reasonable care, will give you up to 300pours with the RAP-I-FORM® system.
The RAP-I-FORM ® system eliminates
the need to drill panels, fabricate in-
side and outside corners, or the labor
of handling forming lumber such as
walers and base plates.
RAP-I-FACTS
RAP-I-FORM®
Monolithic StrapsFor single-pour, inverted “T” foundations.
Metal Products For The Construction Industry
29Metal Products For The Construction Industry
RAP-I-FORM ® 1c” Walerless Plywood Form System
The initial cost of RAP-I-FORM ®
forming system is 50% less than
competitive systems when used
with 1 c” HDO plywood.
This is the only forming system that is specifically designed to meet the
needs of the foundation wall contractor. It is the HDO plywood’s
strength, stability and hard smooth surface that provides a durable foun-
dation wall system that makes it so appealing to builders throughout the
country. In addition, all of the materials and hardware used in this
system can be worked with ordi-
nary hand tools and standard car-
pentry skills.
The nature of HDO plywood is
such that on site preparation is
possible without the complicated
re-working of the basic forming
system. In effect, RAP-I-FORM®
has taken the labor cost of form
preparation and handling out of
foundation wall construction.
The key to the RAP-I-FORM® system is a spreader type clip that fits
over the top of, and under the bottom of, the forming plywood. On the
job, form clips are laid out on a pre-poured footing and spaced ap-
proximately two feet apart. HDO plywood, cut into 2’x8’ sheets, is
then set into the form clip. Top clips are then applied to hold the top
of the form in place, and the foundation wall is poured.
RAP-I-FACTS
Metal Products For The Construction Industry
30
1. Chalk building line on footing2. Place clips on building line.3. Set panels A & B and secure at corner. Then set panels C, D, & E, and continue along buildingline, make sure to place clips top and bottom 4-8” from end of each panel as shown. If desired, clipson joints may be nailed after placement of panel. (Exact spacing is not necessary.)
CAUTION : Always make certain there is a clip to hold the end of each panel regardless of wherethe panel joint may be.
PRE-NAILING OF CLIPS : will cause incorrect spacing and loss of time.
NOTE: With the Rap-I-Form® system a level footing is not necessary, however, a flat footing surfacewill speed the setting of forms and simplify alignment.
It is also imperative that the form clip be fully engaged to the bottom of the panel. An un-level
footing could allow the form clip to drop below the edge of the panel restricting the ability of the
form clip to capture the form panel. To correct the form clip alignment, nail form clips securely to
the bottom of the form panel.
W = Wall ThicknessP = Panel Thickness
Rap-I-Form ® clips are available for virtually any wall thickness and can be used with either plywood or dimension lumber.The table below shows the most common combinations of wall and panel thicknesses which are stocked for immediate shipment.
Rap-I-Form ® shall not be responsible or liable for form failures where maximum clip spacing or recommended rateof pour has been exceeded. The clip spacings and rates of pour listed are the maximum permissible for each size clip.
3/4” and 1-1/8” panel size is for reversible plywood panels.1-5/8” size is for dimensional lumber.2-1/4” size is for 5/8” plywood on a 2 x 4 frame.
W. Wall P. Pours to Pours to Shipping Weight Per Box of 100 Clips Thickness Panel Thickness 24” Height 36” Height
(inches) (inches) ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 2¹⁄₄
4 ³⁄₄ 1¹⁄₈ 24” Maximum 16” Maximum 26# 31#
5⁵⁄₈ 1¹⁄₈ 24” Maximum 16” Maximum 41#
6 ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 24” Maximum 16” Maximum 36# 41#
7⁵⁄₈ ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 2¹⁄₄ 24” Maximum 16” Maximum 46# 49# 61#
8 ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 2¹⁄₄ 24” Maximum 16” Maximum 46# 51# 61#
9 ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 2¹⁄₄ 24” Maximum 16” Maximum 51# 56# 66#
10 ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 2¹⁄₄ 24” Maximum 16” Maximum 51# 58# 68#
11⁵⁄₈ 1¹⁄₈ 2¹⁄₄ 24” Maximum 16” Maximum 66# 76#
12 ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 2¹⁄₄ 24” Maximum 16” Maximum 66# 68# 76# 81#
14 ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 24” Maximum 75# 77# 86#
15 ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 24” Maximum 80# 84# 96#
16 ³⁄₄ 1¹⁄₈ 1⁵⁄₈ 24” Maximum 85# 106# 106#
STOCKED FORIMMEDIATE SHIPPING
MAXIMUMCLIP SPACING
Metal Products For The Construction Industry
31Metal Products For The Construction Industry
2
4
1
3
5
Metal Products For The Construction Industry
Metal Products For The Construction Industry32
Stiffback Tie
Round Stakes
Flat Stacking Tie
Metal Key Way Key Way Stakes
Stake Puller
Award Rap-I-Form ® FormClip is used to spread and holdthe top and bottom of formset-upduring the pour. The topclips are removed during strip-ping and saved for the next job.The clips are available in 1” in-crements from 4” to 24”.
The flat snaptie provides sup-port through the horizontaljoints between the plywoodpanels. Breakback after strip-ping is accomplished with ahorizontal hammer blow.
Used to stiffen and align thewalls by utilizing 2” x 4” ver-tical stiffbacks where applica-ble. Used in conjunctionwithour standard wedges.
With interlocking stakes.Meets both ACI and PCArecommendations for thedesign of tongue andgroove key joint.
Galvanized filler sheets areused on the interior of walls tocompensate for odd walllengths and eliminate the cut-ting of panels. The outsidepanels are allowed to run byat the corners.
32”, 52” or 72”
Sold separately - 100 per box
12”, 15”, 18” & 24”
3/4” RoundStd. Length Weight
12” 1.5#18” 2.2#24” 2.9#30” 3.6#36” 4.3#42” 5.0#48” 5.7#
7/8” RoundStd. Length Weight
12” 2.6#18” 3.9#24” 5.2#30” 6.5#36” 7.8#42” 9.1#48” 10.4#
Pull all our round, square or flatstakes without adjustments. Ourpuller has easy-to-use three po-sition base and three positionhandle.
Form Clip - 4” to 24”
10 stakes per bundle
Filler Pan
Metal Products For The Construction Industry
33Metal Products For The Construction Industry
Metal Washer & Plastic Cone Snaptie
Cardboard Pier Pad Boxes Ready-Vent ®
Note: 2250 lbs. allowable with 2.0 safety factor, short end or long end.Rap-I-Form® Metal Washer and Plastic Cone Snap Ties are now availablein wall sizes 6” through 24”.
Round Snaptie Wedge Flat Snaptie Wedge
Award Rap-I-Form ® RoundSnaptie Wedge is used to takeup and secure round snapties tothe panels. The wedge is se-cured with a vertical hammerblow and is released duringstripping with a reverse ham-mer action.
100 per Box
Award Rap-I-Form ® FlatSnaptie Wedge is used to takeup and secure flat snaptie tiesto the panels. The wedge is se-cured with a vertical hammerblow and is released duringstripping with a reverse ham-mer action.
50 per Box
“Short End”:” Plywood = 4:” Ends
1c” Plywood = 5c” Ends
“Long End”:” Plywood = 83” Ends
“Stubbie”:” Plywood = 13” Ends
1c” Plywood = 1e” Ends
100 Ties Per Box
U.S. Patent#6,165,066
8” x 16”
Poured-in-place foundation
vent, with or without doors.
For wall sizes:
6”, 8”, 10” or 12”
Gray Plastic
See your Local Building Codefor installation requirements.
Designed for forming concrete
pier pads used in residential
post & beam construction.
Available in:
18” x 18” x 8”
24” x 24” x 8”
24” x 24” x 12”
Metal Products For The Construction Industry
Metal Products For The Construction Industry34
Ball Joint - 3” to 12” Floor Sweep
Conductor Pipe & Fittings
Half Round & Full Round Cut Off - 3” to 14”
Angle Rings - 3” to 50” One Piece Elbow
Round Conductor Pipe
2” to 26”
Available in
26GA, 24GA, 22GA & 20GA
(Not all gauges available
in all diameters.)
Cast aluminum cut-offs with galvanized steel slide gates. Cut-offs are used to balancesystems, or save air, heat and power when a machine is not in use.All cut-offs are fur-nished with set screws so blade may be firmly placed for volume control. To install,cut slot in pipe and sheet metal screw collar to pipe. Full cut-offs are used the sameas half cut-offs, except to install. The pipe will fit over the collar of the cut-off onboth ends. They are also furnished with set screws so blade may be firmly placedfor volume control.
Spun steel galvanized balljoints provide flexibility inducts serving moving cutterheads or other moving equip-ment. Thus, duct can swingthrough on arc while maintain-ing exhaust flow in the line.
Floor sweeps are available asshown. Sweeps have tight fittingdoors,conveniently opened byfoot, installed near drills,benches, etc., for floor cleanupuse. Made of 18 Gauge Galva-nized, with 6” diameter connec-tion.
Pressed and rolled steel anglerings are used widely in jointingductwork together in dust andfume control work. All stockrings have bolt holes and aremade from black steel, un-painted. Stainless Steel ringsavailable upon request.
45o, 60o, 75o, 90o
Not Airtight: One-piece elbow isfabricated from a single piece ofgalvanized sheet steel formed bya special machine.Airtight: Airtight elbows andshort radius elbows upon re-quest.
Contact your Award Metals Distributor
for more Conductor Pipe Specifications.
35Metal Products For The Construction Industry
STEALTH ® Ridge Vent - ICC Evaluation ER-61718 sq. inches Net Free Air per lineal foot
STEALTH ® Attic Vents - ICC Evaluation ER-546324” wide 40 sq. inches30” wide 53 sq. inches36” wide 66 sq. inches48” wide 90 sq. inches
TRUE-3810-1/2” x 10-1/2” 38 sq. inches
NIFTY-fifty12” x 12” 50 sq. inches
EYEBROW VENT4” x 19” 50 sq. inches
PENTAGON DORMER13” x 19” 68 sq. inches
HALF ROUND DORMERS9” x 18” 28.47 sq. inches
12” x 24” 50.19 sq. inches
GABLE LOUVERS14” x 6” 17.24 sq. inches14” x 9” 31.84 sq. inches14” x 12” 46.43 sq. inches14” x 18” 75.62 sq. inches14” x 24” 104.80 sq. inches
READY-VENT®
8” x 16” 73 sq. inches
Net Free Air Flow
REGULAR SHAKE DEAD SOFT
1/2” to 2” Plumbers Flashing 14 x 12 17½ x 17½ 17½ x 24 24 x 24 15 x 1933” Plumbers Flashing 20 x 20 20 x 20 20 x 26 24 x 24 18 x 22½4” Plumbers Flashing 20 x 20 20 x 20 20 x 26 24 x 24 18 x 22½4” Oval Plumbers Flashing 24 x 26 22 x 17½
1-1/2” to 2” Multiflex 12½ x 16 15 x 23½ 20 x 26
3” Code Cap 20 x 20 20 x 26 24 x 244” Code Cap 20 x 20 20 x 26 24 x 245” Code Cap 22 x 22 22 x 28 24 x 246” Code Cap 23 x 23 23 x 29 24 x 267” Code Cap 24 x 24 24 x 30 24 x 268” Code Cap 24 x 24 24 x 30 24 x 26
4” Oval Code Cap Vert 17½ x 22½ 17½ x 28 24 x 244” Oval Code Cap Horz 17½ x 22½ 22 x 24 24 x 264” x 19” Eyebrow Vent 22 x 30 26½ x 30
9” x 18” Half Rnd Dormer 30½ x 33½ 30½ x 37½ 36 x 38½ 30 x 3112” x 24” Half Rnd Dormer 39½ x 39½ 43 x 41 35 x 35
4” T-Top 17½ x 17½ 17½ x 24 22 x 23 22½ x 187” T-Top 21 x 20½ 20 x 26 24 x 27 20 x 18
4” Fan Jack 17½ x 17½ 18½ x 246” Fan Jack 20 x 21 20 x 268” Fan Jack 22 x 22 22 x 28
FHA
Base Sizes
Net Free Air is calculated according to AMCA Standard 500
Metal Products For The Construction Industry
SHINGLE
36 Metal Products For The Construction Industry
Metal Products For The Construction Industry
Roofing Metals2-Way Edge No Grip or Drip 63-Way Edge Recover 6Anti Ponding Metal 9Bird Stop - Eave Closure 11Brick Flashing 7Coping - Drip, Grip, Plain 6Counter Flashing 7D-Metal 6Diatto Leg Type 8Diatto Regular Type 8Eave Riser Strip T-Style 7Eave Starter #230 9Fabry Crown Gravel Stop 6Eave Strip 6Fascia Cap 6Goodbye Moss Roof Strip 11Gravel Stop: Drip or Grip 6Lap Joint: Drip or Grip 9Multiflex 10Nosing With Grip 6Pipe Flashings
Aluminum 9FHA Base 9Shake Base 9Standard Base 9
Rake Trim Metal 9Rain Diverter 9Roof Outlet 11Roof-To-Wall Head Flashing 8Roll Valley 11Saddle Stock 7Shingles 11Step Shingles 11T-Metal 7Termite Flashing 8Tile Pan 8Tile Pan - Ribbed 8Tile Riser 8Tucker Flashing 7U-Channel 8Valley Metals
1-Rib Tile Valley 101-Rib W-Valley 102-Rib Open Valley 103-Rib Valley 104-Rib Valley 105-Rib Cedar-Lite Valley 10Gerard W-Valley 11
Vertical Flashing 8Water Table 9Z-Bar 7
Roof DrainageCoil for Seamless Gutter 1Downspout/Leader Pipe
Elbows 1 & 16Pipe Strap - Round 14Pipe Strap - Square 14Round Leader Pipe 14
Square Leader Pipe 14Drop Outlets 13Gutter
End Caps 13Fascia Gutter 12Half Round Gutter 12Hangers 15 & 16“K” Style Gutter 12Miters - Inside & Outside 13Profiles 17Slip Connectors 16Spikes & Ferrules 14
Leader Heads 14Painted Steel - Coils, Downspout 1Scuppers (Outlet Boxes) 14Wire Strainers 16
Ventilation ProductsAccess Able® Access Panel 21DBX1000 Dryer Vent Receptacle 21China Caps 19Code Caps - Round & Oval 19Combo Vents Horizontal & Vertical 20Dormer Vents
Eyebrow 18Half Round 18Pentagon 18
Dryer Vents 21Eave Vent 19Foundation Vents 19Free Air Calculations 35Gable End Louvers 19Gravity Vent 18Nifty-fifty Vent 2 & 18Roof Jacks - 1 & 2 Piece 20Rotary Vents 20Ready-Vent® 19Snow Splitter Vents 20Stamped Louver Vents 19Stamped Mesh Vents 19STEALTH ® Low Profile Vent 3 & 18STEALTH ® Ridge Vent 3 & 18Stem Vent 21Storm Collar 21Sub Base Flashings 21T-Tops 20True-38 Roof Vent 2 & 18Tub Access Door 21Vent Caps 19Wall Cap 21
Drywall TrimsBare Metal
2-Way Corner Caps 233-Way Corner Caps 23Bullnose Cornerbead 22Bullnose Kerf 23Construction L 23Cornerbead 22
Hat Channel/Furring Channel 23J-Bead 22L-Bead 22Resilient Furring Channel 23U-Bead 22
Paperfaced Nail-OnBullnose 25Bullnose Extra Wide 25Bullnose Open Angle 25J-Round Bullnose 25
Paperfaced Tape-On Bullnose Outside Corner 25Bullnose Open Angle 25Inside Corner 25Inside Open Angle 24“L” Trim 24Mini-BeadTM 24Outside Open Angle 24Outside Corner 24U and J-Trim 25
Sun LineTM
Bullnose 3/4” Extra Wide 26Bullnose 3/4” Nail-On 26Bullnose 3/4” Tape-On 26Mini Bull TM 1/2” Nail-On 26Mini Bull TM 1/2” Tape-On 26Outside Corner Nail-On 26Outside Corner Tape-On 26
Stucco Metals#7 Sill Screed 27#34L Stucco Stop 27#36L Stucco Stop 27#66 Casing Bead 27J-8 Drip Mold Metal 27J-33 One Coat Screed 27
Rap-I-Form - ConcreteConstruction Stakes 32Filler Pan 32Flat Snap Tie Wedge 33Flat Stacking Tie 32Form Clips 32Metal Key Way 32Metal Washer Snap Tie 33Monolithic Straps 32Pier Pad Boxes 33Plastic Cone Snap Tie 33Ready-Vent® 33Round Snaptie Wedge 33Screed Bracket 32Stiffback Tie 32
STEALTH® Attic & Ridge Vents 3
Nifty-fifty and True-38 Vents 2
AWARD STONECOAT TM
4 & 5
Conductor Pipe & Fittings 34
Net Free Air & Base Sizes 35
Index of Products
* Not all products are stocked at all of our locations, call for availability.
Confirm specifications with your distributor prior to shipping .
* Product Availability
The Elegance and Durability of Copper From Award Metals
Visit Our Online Catalog at www.AWARDMETALS.com
Award Metals offers a full line of Copper products for:Roofing Metals • Roof Drainage • Ventilation Products
Metal Products For The Construction Industry
© Copyright 2008 Award Metals
Metal Products For The Construction Industry
Award Metals, headquartered in Baldwin Park, California, is one of the West’s largest manufacturers of
sheet metal products for the construction industry. Established in 1962, it manufactures and distributes a
wide array of products for the roofing, concrete forming, drywall and stucco markets.
From 30,000 square feet in one location in 1982, today Award has over 400,000 square feet under roof. Award Metals
manufactures and distributes from six plants located in Baldwin Park and Union City, California; Phoenix, Arizona; Den-
ver, Colorado; Vancouver and Kent, Washington. It also distributes from numerous bonded warehouses throughout the
United States.
1450 Virginia Avenue Baldwin Park, CA 91706
(626) 814-4410 Fax (626) 338-0318
1000 Whipple Road Union City, CA 94587
(800) 691-9669 (510) 429-9040 Fax (510) 429-9046
50 South 43rd Avenue Phoenix, AZ 85009
(602) 278-2969 Fax (602) 272-2306
2400 N.E. 65th Avenue Vancouver, WA 98661
(800) 228-3676 (360) 694-9530Fax (360) 694-9630
12001 East 37th Avenue Denver, CO 80239
(303) 371-8330 Fax (303) 371-8334
18770 80th Place South Kent, WA 98032
(425) 291-9501 Fax (425) 291-9502
Printed in Union City, CA USAwww.awardmetals.com
JANUARY 2008 PRODUCT CATALOG
AWARD DISTRIBUTOR